Scribd
Upload
241 views

Wps

This document is a welding procedure qualification record (PQR) that specifies the welding parameters for a fillet weld joining two pieces of X2CrNiMo17-12-2 steel with dimensions of 8 mm thickness and 28 mm outside diameter. The joint will be welded in the PA position using the GMAW process with G 42 5 M G3Si1 filler metal and a shielding gas of type ESAB. The PQR provides details on welding sequence, parameters for the root and fill/cover passes, and was approved on 2011-10-13.

Uploaded by

sathi_mech
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
241 views

Wps

This document is a welding procedure qualification record (PQR) that specifies the welding parameters for a fillet weld joining two pieces of X2CrNiMo17-12-2 steel with dimensions of 8 mm thickness and 28 mm outside diameter. The joint will be welded in the PA position using the GMAW process with G 42 5 M G3Si1 filler metal and a shielding gas of type ESAB. The PQR provides details on welding sequence, parameters for the root and fill/cover passes, and was approved on 2011-10-13.

Uploaded by

sathi_mech
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Location: WPQR no.: Welder qualification: Welding process: Joint type: Customer: Order no.: Drawing no.

: Part no.:

CHENNAI PQR - 112587 ASME Sect. IX (MMA/SMAW) Fillet weld OGAP supplies & services 109/AE/2011 3-AE-200NB Rev. 1 1

Examiner or test centre: Method of preparation and cleaning: Processing the root weld: Parent material specification: 1) X2CrNiMo17-12-2 2) X2CrNiMo17-12-2 Material thickness: Outside diameter: Welding position:

Grinding Grinding Group no ISO TR 15608:

8 mm 28 mm PA

Dimensions: t1 = 24 mm t2 = 5 mm = 12mm b = 2-3 mm a = 45 a1 = 20 a2 = 80 Remark::

Joint design
t2

Welding sequence

b
t1
c hsk welding solutions

c hsk

welding solutions

Welding details
Welding pass Process 111 111 weld filler [mm] 4 4,0 Current 120-150 A 120-150 A Voltage Current / [V] Polarity 14-19 14-19 =/+ =/+ Wire feed Travel speed Heat input rate [cm/min] [kJ/cm] 6,3 - 8,1 35-45 1.79 - 3.91 m/min 6,3 - 8,1 35-45 1.79 - 3.91 m/min

A) B)

Root pass Fill and Cover pass

Welding filler / welding flux Special regulations for drying Designation A) G 42 5 M G3Si1 / G 38 4 C G3Si1 B) G 42 5 M G3Si1 / G 38 4 C G3Si1 Shielding gas Type A) Further information Parameter / Value Weaving: Preheat temperature [C]: Interpass temperature [C]: Date / checked: 2011-10-13 BR Signature Date / approved: 2011-10-13 BR Signature NIL Brand name Manufacturer Flow rate [l/min] Pre purge time [s] Post purge time [s] Brand name Manufacturer ESAB ESAB 2 300-350 Time [h] Temperature [C]

Date / drawn: 2011-10-13 CSK Signature

You might also like