Scribd
Upload
23 views

Astm Property IM17V

This document provides property information for the ABS resin ABSTRON | IM17V including: 1) Resin type is ABS with features of super high gloss and medium impact for stand base applications. 2) Key mechanical properties including izod impact strength, tensile strength, flexural strength and modulus, heat distortion temperature and hardness. 3) Additional information on melt flow index, specific gravity, mold shrinkage and notes on property measurement and use of values.

Uploaded by

Saketh Vande
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
23 views

Astm Property IM17V

This document provides property information for the ABS resin ABSTRON | IM17V including: 1) Resin type is ABS with features of super high gloss and medium impact for stand base applications. 2) Key mechanical properties including izod impact strength, tensile strength, flexural strength and modulus, heat distortion temperature and hardness. 3) Additional information on melt flow index, specific gravity, mold shrinkage and notes on property measurement and use of values.

Uploaded by

Saketh Vande
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ABSTRON | IM17V

ASTM Property | BEPL

Resin Feature & Super High Gloss, Medium Impact | TV


Applications Stand Base

Resin Type ABS

Property Measuring Method Condition Unit Value

Rheological

Melt Flow Index ASTM D 1238 at 220°C /10 kg gm/10min 35

Mechanical

Izod Impact Strength*, at 1/8" or 3.2mm and


ASTM D-256 Kgf.cm/cm 18
Notched 23°C
Izod Impact Strength*, at 1/4" or 6.4mm and
ASTM D-256 Kgf.cm/cm 15
Notched 23°C
Tensile Strength at Yield,
ASTM D-638 50mm/min Kgf/cm² 495
Type I
Flexural Strength* ASTM D-790 5 mm/min Kgf/cm² 650
Flexural Modulus* ASTM D-790 5 mm/min Kgf/cm² 23000
Rockwell Hardness* ASTM D-785 23°C R-Scale 106

Thermal

Heat Distortion at 18.56 Kgf/cm²


ASTM D-648 °C 95
Temperature, (Method A) (Annealed)

Physical

Specific Gravity ASTM D 792 23°C - 1.045

Other Properties

Mould Shinkage** ASTM D-995 - % 0.4-0.6


Note:

The values above are representative values of natural product and not to be used for mould designs.

The values above are not to be construed as sales specifications and implies no legal binding effect.

All properties except melt flow index are measured on injection moulded specimens.

Properties marked* shall be reported, only if explicitly committed or contracted.

Properties marked ** are values typical of ABS and are provided here solely for customer convenience.

The values provided in this document may be changed due to quality improvement of the product without any prior
notification.

Date, when last updated: 02/12/2021

You might also like