PCB Capabilities - Quick-turn PCB

Manufacturing
Items Capabilities Remarks

Number of Layers - 1-10 layers For orders above 10

layers,please view the
below "Standard PCB" or
contact our sales rep.

Material - FR-4,Aluminum For Flex, Rigid-flex, Metal-

based (Aluminum etc.,),
HDI, Halogen-free, High
Tg, etc.,please view the
below "Standard PCB" or
contact sales rep.

Maximum PCB - 500*1100mm (min 5*6mm) Any sizes beyond this

Size(Dimension) dimension, please view the
below "Standard PCB" or
contact sales rep.

Board Size - ±0.2mm/±0.5mm ±0.2mm for CNC routing,

Tolerance(Outline) and ±0.5mm for V-scoring.

Board Thickness 0.2-2.4mm 0.2,0.4, 0.6, 0.8, 1.0, 1.2,

1.6, 2.0, 2.4mm. Please
view the below "Standard
PCB" or contact us if your
board exceeds these.

Board Thickness - ±10% Normally “+ Tolerance”

Tolerance(t≥1.0mm) will occur due to PCB
processing steps such as
 Manufacturing
Items Capabilities Remarks

Board Thickness - ±0.1mm electroless copper, solder

Tolerance(t<1.0mm) mask and other types of
finish on the surface.

Min Trace 0.1mm/4mil Min manufacturable trace

is 4mil(0.1mm), strongly
suggest to design trace
above 6mil(0.15mm) to
save cost.

Min Spacing Min manufacturable

spacing is 4mil(0.1mm),
strongly suggest to design
spacing above
6mil(0.15mm) to save cost.

Outer Layer Copper 1oz/2oz/3oz(35μm/70μm/105μm) Also known as copper

Thickness weight. 35μm=1oz,
70μm=2oz, 105μm=3oz.
Please view the below
"Standard PCB" or contact
us if you need copper
weight greater than 3oz.

Inner Layer Copper 1oz/1.5oz(35μm/50μm) Inner copper weight as per

Thickness customer’s request for 4
and 6 layers(Multi-layer
laminated structure). Please
contact us if you need
copper weight greater than
1.5oz.
 Manufacturing
Items Capabilities Remarks

Drill Sizes (CNC) 0.2-6.3mm Min drill size is 0.2mm,

max drill is 6.3mm. Any
holes greater than 6.3mm
or smaller than 0.3mm will
be subject to extra charges.

Min Width of 0.15mm(6mil) For pads with vias in the

Annular Ring middle, Min width for
Annular Ring is
0.15mm(6mil).

Finished Hole 0.2mm-6.2mm The finished hole diameter

Diameter (CNC) will be smaller than size of
drill bits because of copper
plating in the hole barrels

Finished Hole Size - ±0.08mm For example, if the drill

Tolerance(CNC) size is 0.6mm, the finished
hole diameter ranges from
0.52mm to 0.68mm will be
considered acceptable.

Solder Mask LPI Liquid Photo-Imageable is

the mostly adopted.
Thermosetting Ink is used
in the inexpensive paper-
based boards.

Minimum Character 0.15mm Characters of less than

Width(Legend) 0.15mm wide will be too
narrow to be identifiable.
 Manufacturing
Items Capabilities Remarks

Minimum Character - 0.8mm Characters of less than

Height (Legend) 0.8mm high will be too
small to be recognizable.

Character Width to - 1:5 In PCB silkscreen legends

Height Ratio processing, 1:5 is the most
(Legend) suitable ratio

Minimum Diameter - 0.6mm Design Half-Holes greater

of Plated Half Holes than 0.6mm to ensure better
connection between boards.

Surface Finishing HASL with lead The most popular three

HASL lead free types of PCB surface
Immersion gold,OSP finish. Please view the
below "Standard PCB" or
contact us for other
finishes.

Solder Mask Green ,Red, Yellow, Blue, White No extra charge

,Black (Green, Red, Yellow,
Blue)

Silkscreen White, Black, None No extra charge.

Panelization V-scoring, Leave min clearance of

Tab-routing, 1.6mm between boards
Tab-routing with Perforation for break-routing. For
(Stamp Holes) V-score panelization,
set the space between
boards to be zero.
 Manufacturing
Items Capabilities Remarks

Others - Fly Probe Testing (Free) and No extra charge.

A.O.I. testing(free), ISO
9001:2008 ,UL Certificate