ECHEM Lab 03 Density of Liquid - Version2
ECHEM Lab 03 Density of Liquid - Version2
Objectives:
To perform activities involving measurement of mass and volume of liquid
materials
To determine the density of different liquid materials
To observe objects if they will sink or float in some liquid materials
Materials:
Plastic Cups Small piece of paper
Water Rubber
Dishwashing liquid Cracked Glass (that fits inside the cups)
Cooking Oil Screw
Honey Raisins
Paper clip
REMINDER: Please include picture evidences in the last portion of your laboratory
report as part of the documentation. NO PICTURE EVIDENCES is AUTOMATIC ZERO
in this activity
Procedure
A. Sink or Float:
1. Pour equal amount of water, vegetable oil, honey and dishwashing liquid in
separate cups (about 1/8 of the cup)
2. Place the raisins on each cup and observe if they will sink or float
3. Write the observation in Table 3.1
4. Replace the raisins with paper, paper clip, rubber, cracked glass and screw
then observe also.
5. Write your observation in Table 3.1
B. Mix it up
1. On a separate container, pour individually the four liquids.
2. Does the four separated? On Table 3.2. Write the layer of the liquid materials
produced.
3. Take a picture of the mixture, print it and include that in your laboratory
report.
Questions:
1. Why object may float or sink in different liquid solutions?
2. In Mix it Up experiment, why the arrangement of the fluid is in that pattern?
3. What are the densities of the four liquids?
Observation Table:
Raisins
Piece of Paper
Paper clip
Glass
Rubber
Screw