ONLINE UPS HOME/OFFICE DATA CENTER MEDICAL INDUSTRY TRANSPORTATION EMERGENCY

DSP Multipower
3 Phase In - 1 Phase Out / 15kVA – 20kVA

On-Line Double Conversion Technology

Real Digital Signal Processor (DSP) Controller
Paralel redundant operation up to 4 units (Optional)
Increased Input Power Factor (0,95)
Transformerless Design
Cold Start Function
Overload, Overheat & Short Circuit Protections
User Friendly Multi-Functional LED/LCD Display Panel
Energy Saving Mode (GREEN MODE)
Intelligent Battery Management System
RS232 Communication Port & Management Software
SNMP, Dry Contact, RS485, USB Card options

VFI SERVICE
TYPE

UPS ONLINE TOWER RACK LCD DISPLAY SERVICE

TECHNICAL SPECIFICATIONS
(15-20kVA)

MODEL DSPMP-3115T DSPMP-3120T

Power (kVA) 15 20
Power (kW) 13,5 18
INPUT
Phase Configuration 3Ph + N + PE (Hardwire)
Nominal Voltage 380VAC/400VAC /415VAC
Minimum Voltage (at 75% Load) 277VAC
Maximum Voltage 485VAC
Frequency 45-65 Hz
Power Factor (@linear load) 0,95
OUTPUT
Power Factor 0,9
Phase Configuration 1Ph + N + PE (Hardwire)
Nominal Voltage 220VAC/230VAC/240VAC
Wave Form Pure Sine Wave
Total Harmonic Distortion at 0 to 100% linear load <3%
Frequency 50Hz or 60Hz (adjustable)
Frequency Tolerance (free running) ±0,2%
Frequency Synchronized Range ±1Hz or ±3Hz (selectable)
Voltage Regulation ±2%
Crest Factor 3
Transfer Time 0sec
Total Efficiency > 91%
Greenmode Efficiency > 95%
BATTERY
Type Maintenance-free lead acid batteries
Voltage 240VDC
Quantity per string 20pcs 12V Batteries
Built in max. Charge Current 4A
DISPLAY
LED + LCD Display Line Mode, Backup Mode, ECO Mode, Bypass Supply, Battery Low, Battery Bad/Disconnect,
Overload and Transferring with Interruption & UPS Fault
LCD display Input Voltage, Input Frequency, Output Voltage, Output Current, Output Frequency,
Load Percentage, Battery Voltage & Inner Temperature.
Self Diagnostics Upon Power-on, Front Panel Setting & Software Control, 24-hour routine checking
Audible and Visual Alarms Line Failure, Battery Low, Transfer to Bypass, System Fault Conditions
COMMUNICATION
Interface (Communication ports) Standard RS232 port and optional RS485, Internal SNMP, Dry Contact Cards
ENVIRONMENT
Operating Temperature 0 ˚C - 40 ˚C
Proposed Temp. to extend battery life 20 - 25 ˚C
Humidity up to 95% (non-condensing)
Audible Noise at 1 m <60 dB
Protection Class IP 20
PHYSICAL SPECIFICATIONS
Net Weight 60kg 62kg
Dimensions (mm) (WxDxH) 290x650x770
STANDARDS
Standards EN62040-1-1 (Safety); EN62040-2 (EMC); EN62040-3 (Performance); EN60950-1
ACCESSORIES
Optional Internal&External SNMP, Dry Contact Board, External Manual Bypass,
External Battery Connection Cable, External Additional Charging Board Software

10