Scribd
Upload
69 views

Physics - Investigatory - Project Optics FINAL

This document is a physics investigatory project report on determining the refractive indexes of water and oil. It includes sections on the aim, apparatus, theory, procedure, observations, calculations, results, precautions, sources of error, and bibliography. The student successfully completed an experiment to find the refractive indexes of water and oil using a convex lens, plane mirror, water, oil, and other materials. Calculations were shown to find the refractive index of water as 1.0831 and oil as 1.2886. The project was completed under the guidance of the student's physics teacher.

Uploaded by

dduma240106
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
69 views

Physics - Investigatory - Project Optics FINAL

This document is a physics investigatory project report on determining the refractive indexes of water and oil. It includes sections on the aim, apparatus, theory, procedure, observations, calculations, results, precautions, sources of error, and bibliography. The student successfully completed an experiment to find the refractive indexes of water and oil using a convex lens, plane mirror, water, oil, and other materials. Calculations were shown to find the refractive index of water as 1.0831 and oil as 1.2886. The project was completed under the guidance of the student's physics teacher.

Uploaded by

dduma240106
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 18

Physics

Investigatory
Project

Year :- 2022-2023

BY :-
Sri Chaitanya
Senior Secondary School
Perumbakkam, Chennai
DEPATRMENT OF PHYSICS
CERTIFICATE
THIS IS TO CERTIFY THAT

OF CLASS XII HAS


SUCCESSFULLY COMPLETED THE RESEARCH ON
THE MENTIONED TOPIC UNDER THE GUIDANCE
OF (SUBJECT TEACHER)
DURING THE YEAR ( 2022 - 23 ) IN PARTIAL
FULFILMENT OF PRACTICAL EXAMINATION.

SIGNATURE OF EXTERNAL EXAMINER SIGNATURE OF PHYSICS TEACHER


ACKNOWLEDGEMENT

In the accomplishment of this project successfully, many people


have best owned upon me their blessings and the heart pledged
support, this time I am utilizing to thank all the people who have
been concerned with project.

Primarily I would thank god for being able to complete this


project with success. Then I would like to thank my Physics
Teacher ___________________, whose valuable guidance has
been the ones that helped me patch this project and make it full
proof success his suggestions and his instructions has served as
the major contributor towards the completion of the project.
Then I would like to thank my parents and friends who have
helped me with their valuable suggestions and guidance has been
helpful in various phases of the completion of the project.
Last but not the least I would like to thank my classmates who
have helped me a lot.
INDEX
CERTIFICATE
ACKNOWLEDGEMENT
INTRODUCTION
OBJECTIVE / AIM
APPARATUS / MATERIAL REQUIRED
DIAGRAM
THEORY
PROCEDURE
OBSERVATIONS
CALCULATIONS
RESULTS
PRECAUTIONS
SOURCES OF ERRORS
BIBLIOGRAPHY
INTRODUCTION

In optics, the refractive index or index of refraction n of a material is a dimensionless


number that describes how light propagates through that medium. It is defined as

𝐶
𝑛=
𝑉

Where c is the speed of light in vacuum and v is the phase velocity of light in the medium.
For example, the refractive index of water is 1.333; meaning that light travels 1.333 times
faster in a vacuum than it does in water.

Refraction of a light ray


AIM
To find the refractive indexes of (a) water
(b) oil using a plane mirror, an equi-convex
lens, and an adjustable object needle.

APPARATUS
 Convex Lens
 Plane Mirror
Water
Oil
Clamp Stand
An Optical Needle
Plumb Line
Knitting Needle
Half Meter Scale
Glass Slab
Spherometer
DIAGRAM
THEORY
1. If f1 and f2 be the focal length of the glass convex
lens and liquid lens and f be the focal length of their
combination then:-

𝟏 𝟏 𝟏 𝑭𝒇𝟐
=
𝑭 𝒇𝟏
+ 𝒇 or f2 =𝒇
𝟐 𝟏 −𝑭

2. Liquid lens formed a Plano-concave Lens with R1=R


and R2=∞ then by using lens make’s formula

𝟏 𝟏 𝟏
= (𝒏 − 𝟏) ⌊ − ⌋
𝒇𝟐 𝑹𝟏 𝑹𝟐
𝟏 𝟏
=(𝒏 − 𝟏) ⌊ − ∞⌋
𝑹𝟏

𝟏
= (n-1)⌊𝑹 − 𝟎⌋

𝟏 𝒏−𝟏
=
𝒇𝟐 𝑹
𝑹
n= +𝟏
𝒇𝟐
Where n = Refractive index of the liquid
R = the radius of the curvature of the convex lens.

3. The radius of the lower surface of the convex lens is


given by:
𝒍𝟐 𝒉
R= 𝟔𝒉
+𝟐

Here, l is the average distance between the legs of the


spherometer and h is the difference in the reading of the
spherometer when placed first on the convex lens and
then on plane mirror.
PROCEDURE

(a) For focal length of convex lens:

1. Find the rough focal length of the convex lens.

2. Place a plane mirror on the horizontal base of the


iron stand and then a convex lens on the plane mirror.

3. Hold the needle in the clamp stand and adjust its


position on the stand such that there is no parallax
between tip of the needle and its image.

4. Measure distance between tip and upper surface of


the lens by using a plumb line and half meter scale. Also
measure the distance between tip of needle and upper
surface of the mirror. Take the mean of the two
readings. This means distance will be equal to the focal
length of the convex lens (f1).
(b) For focal length of the combination.

5. Put a few drops of the water on the plane mirror and


put the convex lens over it with its same face above as
before. The water spreads in a form of layer and acts
like a Plano-concave lens.
6. Repeat the steps 3 and 4 to determine the equivalent
focal length of the combination.
7. Record the observation.
8. Repeat the steps 5, 6, 7 for other transparent liquid
(oil).

(c) For radius of curvature of convex lens surface:

9. Determine the pitch and the least count of the


spherometer.

10. Remove the convex lens and dry it completely. Put


the spherometer on this lens surface.
11. All the three legs of the spherometer should be
placed symmetrically on the lens and adjust the central
screw tip to touch the surface of the lens.

12. Remove the spherometer from the surface of the lens


and place on the plane mirror surface and record the
reading.

13. Repeat the steps 10 and 11 three times.

14. Obtain the impressions of the three legs of the


spherometer on a paper and mark them and their
average distance.

𝒍𝟏 + 𝒍𝟐 + 𝒍𝟑
l=
𝟑
OBSERVATIONS

Pitch of the spherometer= 1 cm

Least count of the spherometer = 0.01 cm

Distance between the legs:

(1) AB = 3 cm
(2) BC = 3 cm
(3) CA = 3 cm

Table for calculation of ‘h’

S.No Initial reading No. of Final Additional h=n x Mean


of the C.S. on complete reading of C.S div. pitch “h”
the convex rotations the c.s on moved + m x (cm)
lens the glass L.C
(a) (n) slab

1 62 0 6.5 55.5 0.555 0.5775

2 64 0 4 60 0.6
To measure focal length ‘f’ of convex lens

Distance of needle tip from


Area S.No Tip of the upper Upper Mean Focal
𝑥1 + 𝑥2
between surface of the surface of x= Length
2
lens and convex lens(cm) the plane (cm)
plane mirror X1 mirror(cm)
X2
Without 1 30.5 31 30.75 f1=
liquid 33.85
2 36.7 37.2 36.95

With water 1 31.4 31.8 31.6 f2=34.7


2 37.5 38.1 37.8
With oil 1 9.4 9.6 9.5 f3=10
2 10.4 10.6 10.5

CALCULATIONS

Mean distance between two legs


𝐴𝐵+𝐵𝐶+𝐶𝐴
𝑙= = 3 cm
3

(0.555+0.6)
Mean of h = = 0.5775 cm
2

To find the radius of curvature of the convex lens:

𝑙2 ℎ
𝑅= + = 2.8861 𝑐𝑚
6ℎ 2
Measurement of refractive indices of water and oil

1) With water between the convex lens and the plane mirror:

𝑅 2.8861
𝜇1 = 1 + = 1+ = 1.0831
𝑓2 34.7

2) With oil between the convex lens and the plane Mirror

𝑅 2.8861
𝜇2 = 1 + = 1+ = 1.2886
𝑓3 10

Results

The refractive index of water is µ1 = 1.0831

The refractive index of oil is µ2 = 1.2886


PRECAUTIONS

1. The plane mirror should be clean and fully shining


surface.
2. The liquid taken should be transparent.
3. The parallax should be removed tip to tip.
4. The eye should be at a distance about 30 cm from the
needle while removing the parallax.
5. Only few drops of liquid should be taken so that its
layer should be thick.
6. The legs of the spherometer should be vertical.
7. The centre leg of the spherometer should turn in one
direction only.

SOURCES OF ERROR

1. Liquid may not be quite transparent.


2. The parallax may not be fully removed.
3. The spherometer legs should be placed symmetrical on
the surface of the convex lens.
4. The tip of the central screw should not just touch the
surface of lens or mirror.
BIBLIOGRAPHY

HELP FROM INTERNET


HELP FROM TEACHERS
NCERT TEXTBOOK
NCERT Physics Lab Manual
www.google.com
www.scribd.com
www.wikipedia.com
thank you

You might also like