VEL TECH MULTI TECH Dr. RANGARAJAN Dr.

SAKUNTHALA ENGINEERING
COLLEGE
DEPARTMENT OF INFORMATION TECHNOLOGY
Year / Sem: III / VI Subject: INTERNET OF THINGS
Subject: 191IT623
QUESTION BANK - UNIT – I
Internet of Things - Physical Design- Logical Design- IoT Enabling Technologies - IoT Levels &
Deployment Templates - Domain Specific IoTs - IoT and M2M - IoT System Management with
NETCONF-YANG- IoT Platforms Design Methodology
PART A (Objective Type – 1 mark)
1 IoT deals with ---------------------------- CO1.1 K1
a) Connecting Things b) Connection of Things
c) Connection of computers d) Connecting computers
2 Characteristics of IoT include CO1.1 K1
a) Dynamic & Self-Adapting b) Unique Identity
c) Interoperability d) All the above
3 IoT devices can exchange data CO1.1 K2
a) Directly b) Indirectly c) Both a & b d) None of a & b
4 How many open interfaces are there to connect with Service Capability layers? CO1.1 K1
a) One b) Two c) Three d) NIL
5 The "Things" in IoT refers to physical objects that have ________ identifiers and CO1.1 K2
can sense and communicate with their external environment
a) Double b) Triple c) Unique d) No
6 An equation of internet of things......... CO1.1 K1
a) physical object + controller sensor and actuator + internet
b) controller sensor and actuator + internet
c) physical object + internet
d) physical object + controller + internet
7 HTTP is used in CO1.2 K2
a) Application Layer b) Link Layer
b) Network layer d) Transport Layer
8 Which of the following is NOT a Communication protocol? CO1.2 K1
a) ZigBee b) Bluetooth c) ModBus d) IEEE 801.15.6
9 In IoT environment, the data processing happens at CO1.3 K2
a) cloud b) locally c) both a & b d) None of a& b
10 IPv6 is implemented in _______________ layer CO1.3 K1
a) devices b) services c) application d) network
11 ______________ protocols are the backbone of IoT systems and enable network CO1.3 K2
connectivity and linking to applications.
a) Network b) Communication c) Application d) Cloud
12 IoT Enabling Technologies include CO1.4 K1
a) Cloud b) Communication Protocols c) Big Data d) All the above
13 -------------- use WSN to monitor the health of buildings and bridges CO1.4 K1
a)Surveillance system b)Structural health monitoring system
c)Soil moisture monitoring system d)Weather monitoring system
14 A level-6 IoT system has _______________________ CO1.5 K2
a) multiple independent end nodes b) multiple end nodes and one coordinator node
c) multiple nodes only d) All the three
15 A level-4 IoT system has CO1.5 K2
a) Single node b) two nodes c) multiple nodes d) None of a, b & c
16 Access Network allows the devices in the Device and Gateway Domain to CO1.6 K2
communicate with the Core Network. True or False?
17 The data in IoT is collected in the cloud which can be ________ CO1.6 K1
a) Public b) private c) hybrid cloud d) all the three
18 One of the following is not a cloud service provider. Identify it. CO1.6 K2
a) Google Compute Engine b) Red Hat Linux
c) Amazon Web Services d) Microsoft Azure
19 LTE-A is a communication Protocol used in M2M communications. True or CO1.7 K2
False?
20 The main function of M2M Service Bootstrap Function is to facilitate the CO1.7 K1
bootstrapping
a) Security credentials b) routing credentials c) network credentials d) data
credentials
21 M2M Authentication Server uses ______ for authorization of communication. CO1.7 K1
a) Biometric b) Iris detection c) Face recognition d) Digital certificate
22 Say True or False: The M2M nodes within one network cannot communicate with CO1.7 K2
nodes in an external network.
23 In M2M, the _____________ can use either wired or wireless networks (IP based). CO1.7 K2
a) Communication Network b) M2M Area Network
c) Local Network d) all the above
24 NETCONF is an __________ network management protocol CO1.9 K1
a) IEEE b) ETSI c)IETF d) None
25 YANG is said to be ____________ language. CO1.9 K1
a) tree-structured b) object-oriented c) multinational d) European

PART -B

1 Clarify what you understand from the various evolutionary phases of Internet of CO1.1 K2
Things. (Page no.19)

2 Write about any four characteristics of Bigdata Analytics (Page no.37) CO1.1 K2

3 List out the various protocols used in different layers during the physical design CO1.2 K2
of IoT. (Page no.23)

4 Describe the functional blocks involved in the logical design of IoT CO1.3 K2
(Page no.29)
5 Write a short note on request-response in IoT Communication Model. (Page CO1.3 K2
no.29)

6 State the importance of Enabling Technologies (Page no.35) (AU 2018) CO1.4 K2

7 List out the characteristics of Cloud Computing as one of the enabling CO1.4 K2
technologies for IoT and brief them. (Page no.36)

9 You are assigned with the construction of a multiple node IoT application where- CO1.5 K4
in one of the nodes act as a coordinator. Explain it with neat diagram
(Page no.38)
10 Examine the functionalities in Home Automation domain or Agriculture domain CO1.6 K2
or Logistics domain (Page no.48)

11 Differentiate M2M & IoT(Page no.65) CO1.7 K4

12 Why do we need Network Management for IoT? (Page no.81) CO1.8 K2

13 Explain the role of NETCONF in Network Management for IoT. CO1.9 K4

15 In order to have a good IoT network management system, what are the network CO1.9 K4
operator requirements based on your understanding? (Page no.81)

16 List out the Steps of IoT Design Methodologies (Page no.100) CO1.10 K2

17 Explore the importance of Domain Model and Information Model Specifications CO1.10 K4
in Design Methodology(Page no.102 & 103)

PART –C

1 Analyse in detail about the Physical & Logical Design requirements for IoT. CO1.2 K4
(Page no.23 & 29) CO1.3

2 Explain how the IoT Enabling Technologies favour in building IoT Systems. CO1.4 K2
(Page no.35)
3 Discuss, with appropriate diagrams, the different types of IoT Levels CO1.5 K4
(Page no.38) (M.E AU 2018)
4 Elaborate the Domain Specific implementation of IoT for (i) Home Automation CO1.6 K2
(ii) Logistics (iii) Agriculture (Page no.47) (M.E AU 2019)
5 Develop an IOT design for Smart health care system and justify how Privacy and CO1.6 K5
Security is provided in your prototype.(M.E(AU 2019))

6 Case Study: How IoT (Sensors, Connectivity, Challenges, Characteristics, CO1.6 K5

7 Analyze IoT for designing Home Automation systems including Smart lighting CO1.6 K5
and Intrusion detection. (M.E(AU 2019))

8 Justify how NETCONF with YANG replaces SNMP for IoT Network CO1.9 K3
Management(Page no.83)(M.E AU 2018)
9 Write short notes on: CO1.9 K3
a) YANG Module and Example b) Key elements of SDN. (Page no.84)

10 Plan and illustrate the hierarchical steps involved in IoT Design methodology CO1.10 K2
(Page no.99)

Assignments for Unit 1

1. Observe your surroundings like home, office or outdoors and list all the IoT implementation you
can find. Analyze the use of IoT in the respective situations and list all the challenges you can
observe. Create a chart to evaluate the benefits of using IoT in those scenarios. Finally, think of
an alternate solution that may be more beneficial than what is currently applied.

Book: Internet of Things-A Hands on Approach – Arshdeep Bahga, Vijay madisetti-2015