Scribd
Upload
35 views

Harshith Seminar Report

This document is a technical seminar report on piezoelectric transducers submitted by Nampalli Harshith. It discusses generating electricity from kinetic energy using piezoelectric materials in floor tiles or shoe inserts. The report covers the basic principles of piezoelectricity, implementations of piezoelectric energy harvesters, and tests of a floor tile prototype. It concludes that piezoelectric technology can capture pressure from human movement and convert it to electrical energy with applications for powering sensors.

Uploaded by

Akhil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
35 views

Harshith Seminar Report

This document is a technical seminar report on piezoelectric transducers submitted by Nampalli Harshith. It discusses generating electricity from kinetic energy using piezoelectric materials in floor tiles or shoe inserts. The report covers the basic principles of piezoelectricity, implementations of piezoelectric energy harvesters, and tests of a floor tile prototype. It concludes that piezoelectric technology can capture pressure from human movement and convert it to electrical energy with applications for powering sensors.

Uploaded by

Akhil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

PIEZOELECTRIC TRANSDUCERS

A Technical Seminar report submitted in partial


fulfillment for the award of the degree of

BACHELOR OF TECHNOLOGY IN
Department Of EEE
(2020-2024)
Submitted by

NAMPALLI HARSHITH 21X05A0216

Under the esteemed guidance of


Mr.M.Ravindar.,M.Tech
Assistant Professor
Department of EEE
Department of EEE

CERTIFICATE

This is to certify that the Technical Seminar report entitled


“Piezoelectric Transducers” is the bonafide work done by Nampalli Harshith
21X05A0216, in partial fulfillment of the requirements for the award of the degree of
Bachelor of Technology in Electrical And Electronic Engineering, from
Jawaharlal Nehru Technological University Hyderabad, during the year 2020-2024.

Seminar Guide Head of the Department


M.Ravindar.,M.Tech Dr. C.Sasikala
Assistant Professor Professor & Head
Department of EEE
NARSIMHAREDDY ENGINEERING COLLEGE Department of EEE,

Maisammaguda, Kompally, Secunderabad. NARSIMHAREDDY ENGINEERING COLLEGE


Maisammaguda, Kompally, Secunderabad.
ACKNOWLEDGEMENT
I take this opportunity to thank all the people who gave their full
support to Technical Seminar their guidance and co-operation helped us
in completing this Seminar.

I take extreme pleasure to express my deep sense of gratitude to My


Seminar M.Ravindar.,M.tech., and EEE Department,for her inspiring
guidance and encouragement throughout the preparation and completion
of this Seminar.

I would like to thank Dr.C.SASIKALA., HOD, Electrical and


Electronics Engineering for giving her support not only during the
Technical Seminar but also during the period of study in NRCM.

I wish to express our deep and sincere feeling of gratitude to our


principal Dr.R.LOKANADHAM. for his permission in proceeding inthe
Seminar. Sincerely thank our Management and all the teaching and non-
teaching staff of the Electrical and Electronics Engineering for their
timely suggestions, healthy criticism and motivation during the course of
this work.

I would like to thank all my friends for providing help and moral
support at the right timing. With great affection and love. We thank our
parents who were the backbone behind our deeds.

NAMPALLI HARSHITH 21X05A0216


ABSTRACT

Man has needed and used energy at an increasing rate for the sustenance and well-
beingsince time immemorial. Due to this a lot of energy resources have been exhausted
and wasted.Proposal for the utilization of waste energy of foot power with human
locomotion is verymuch relevant and important for highly populated countries like India
where the railwaystation, airports, metro stations, temples etc., are overcrowded all
round the clock .When theflooring is engineered with piezoelectric technology, the
electrical energy produced by
the pressure is captured by floor sensors and converted to an electrical charge by piezotr
ansducers, then stored and used as a power source. And this power source has
manyapplications as in agriculture, home application and street lighting and as energy
source forsensors in remote locations.

report is all about generating electricity when people walk on the Floor. Think
about theforces you exert which is wasted when a person walks. The idea is to convert
the weightenergy to electrical energy The Power generating floor intends to trans- late
the kinetic energyto the electrical power. Energy Crisis is the main issue of world these
days.This report includes the development, implementation, and tests conducted in the
design of the prototype of the floor tile.

4
CONTENTS

CERTIFICATE…………………………………………………1
CERTIFICATE OF ACCEPTANCE…………………………..2
ABSTRACT……………………………………………………3
CONTENTS……………………………………………………4
LIST OF FIGURES…………………………………………….5
INTRODUCTION……………………………………………...6
BLOCK DIAGRAM…………………………………………..7
ACTUAL IMPLIMANTATION……………………………….8
DEFORMATION OF TYRE…………………………………..9
CONCLUSION……………………………………………….10
REFERENCES………………………………………………..11

5
LIST OF FIGURES

Fig 1 Basic Principle


Fig 2 Conversion of mechanical energy into electrical
energy and vice versa
Fig 3 Generation of piezoelectricity
Fig 4 Mechanism of piezoelectric effect in quartz
Fig 5 System model of piezoelectric energy harvester
Fig 6 Circuit connection
Fig 7 A)Tire under no load
B)Deformation of the sidewall and creation of a
contact
Fig 8 A)A 20 x 270nm plastic ribbon with four
B)A plastic ribbon with three
Fig 9 An Arrangement of PZT benders in ATire

Fig 10 Diagramatic Presentation of a PIEZO-CAR

You might also like