Scribd
Upload
342 views3 pages

UVIM Driver Install Manual Eng - 20131227

This document provides installation steps for a virtual COM port driver on Windows 7, 8, and 8.1. The steps are: 1. Install the diagnosis program and connect the USB cable. 2. The device setup will start automatically. 3. Check the status of the virtual COM port in the Device Manager - if it shows a yellow exclamation, restart the driver update.

Uploaded by

Carlos Enrique De La Rosa Zambrano
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
342 views3 pages

UVIM Driver Install Manual Eng - 20131227

This document provides installation steps for a virtual COM port driver on Windows 7, 8, and 8.1. The steps are: 1. Install the diagnosis program and connect the USB cable. 2. The device setup will start automatically. 3. Check the status of the virtual COM port in the Device Manager - if it shows a yellow exclamation, restart the driver update.

Uploaded by

Carlos Enrique De La Rosa Zambrano
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Installation Steps for JASTEC Virtual COM Port Driver (Windows 7, Windows 8, Windows 8.

1)

1. Install Diagnosis Program and connect uVIM USB Cable with PC.

2. Device Setup is automatically started as below.

3. After Device Setup is completed, check the status of JASTEC Virtual COM Port from Device Manager.

<Picture 1> <Picture 2>

If it shows like picture 1 from Device Manager, you need to re-start driver updates.

If it shows like picture 2 from Device Manager, it means that driver has installed.

4. In case of JASTEC Virtual COM Port is shown as yellow exclamation mark from Other devices, you
need to re-start driver update.
5. When you select Update Driver Software, Driver Searching screen will be shown. At this time, click
‘Search automatically for updated driver software.’

6. Check the status of installation of Driver.

<Picture 1> <Picture 2>

If it shows like picture 1, it means that driver has installed.

If it shows like picture 2, you need to re-start ‘Update Driver Software’ (step 4).

7. This time, click ‘Browse my computer for driver software.’


8. Click the folder that Diagnosis Program is installed from ‘Browse for driver software on your
computer’.

Diagnosis program installed location is as below.

In case of 32bit OS : c:\program files\ Diagnosis Program Folder

In case of 64bit OS : c:\program files(x86)\ Diagnosis Program Installation Folder

9. When you click ‘Next’ button from above screen, ‘Windows Security’ will be shown as below. At this
time, click 'Install this driver software anyway.’

10. If it shows as below, it means that driver is installed.

You might also like