32data Sheet lm561c Rev.7.0
32data Sheet lm561c Rev.7.0
LM561C
Table of Contents
1. Characteristics ----------------------- 3
1. Characteristics
Peak Pulsed Forward Current Ifp 300 mA Duty 1/10, pulse width 10 ms
260 ºC
Assembly Process Temperature - -
<10 s
ESD (HBM) - ±5 kV -
AY 2.6 - 2.7
A1 2.8 - 2.9
S4 30.0 32.0
S6 34.0 36.0
S4 30.5 32.5
S6 34.5 36.5
S4 31.0 33.0
S6 35.0 37.0
S4 32.0 34.0
S6 36.0 38.0
S4 33.0 35.0
S6 37.0 39.0
S4 32.5 34.5
S6 36.5 38.5
S4 32.0 34.0
S6 36.0 38.0
Reverse Voltage
V 0.7 - 1.2
(@ 5 mA)
Color Rendering Index (Ra) - 80 - -
Note:
Samsung maintains measurement tolerance of: forward voltage = ±0.1 V, luminous flux = ±5 %, CRI = ±3, R9 = ±6.5
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
S P M W H T 5 4 1 M L 5 X A R K S 0
4 5 Color WH White
6 Product Version T
5 Min. 80
12 CRI
7 Min. 90
W☆ 2700 W1, W2, W3, W4, W5, W6, W7, W8, W9, WA, WB, WC, WD, WE, WF, WG
V☆ 3000 V1, V2, V3, V4, V5, V6, V7, V8, V9, VA, VB, VC, VD, VE, VF, VG
U☆ 3500 U1, U2, U3, U4, U5, U6, U7, U8, U9, UA, UB, UC, UD, UE, UF, UG
Bin
T☆ 4000 T1, T2, T3, T4, T5, T6, T7, T8, T9, TA, TB, TC, TD, TE, TF, TG
Code:
15 16 CCT (K)
R☆ 5000 R1, R2, R3, R4, R5, R6, R7, R8, R9, RA, RB, RC, RD, RE, RF, RG
Q☆ 5700 Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, QA, QB, QC, QD, QE, QF, QG
P☆ 6500 P1, P2, P3, P4, P5, P6, P7, P8, P9, PA, PB, PC, PD, PE, PF, PG
☆ "0" (Whole bin) "M" (Quarter bin) “K” (K Kitting) or “S” (S Kitting)
S0 S4, S5, S6
S4 30.5 ~ 32.5
S6 34.5 ~ 36.5
3000
SPMWHT541ML5X◆V☆S5 S5 32.5 ~ 34.5
S4 31.0 ~ 33.0
S6 35.0 ~ 37.0
3500
SPMWHT541ML5X◆U☆S5 S5 33.0 ~ 35.0
S4 32.0 ~ 34.0
S6 36.0 ~ 38.0
4000
SPMWHT541ML5X◆T☆S5 S5 34.0 ~ 36.0
80
S4 33.0 ~ 35.0
S6 37.0 ~ 39.0
5000
SPMWHT541ML5X◆R☆S5 S5 35.0 ~ 37.0
S4 32.5 ~ 34.5
S6 36.5 ~ 38.5
5700
SPMWHT541ML5X◆Q☆S5 S5 34.5 ~ 36.5
S4 32.0 ~ 34.0
S6 36.0 ~ 38.0
6500
SPMWHT541ML5X◆P☆S5 S5 34.0 ~ 36.0
Note:
"◆" can be "A" (2,500pcs) or "K" (10,000pcs) of reel taping
"☆" can be "0" (Whole bin), "M" (Quarter bin), "K" (K Kitting) or "S" (S Kitting) of the color binning
b) Kitting rule
[Kitting example]
[Binning Information]
Bin #1 Bin #2
AY AY
VF AZ AZ
A1 A1
W (1, 2, 5, 6) Z (B, C, F, G)
CIE V (6, 7, A, B) V (6, 7, A, B)
X (3, 4, 7, 8) Y (9, A, D, E)
S4 S4
S4 S5
IV S5 S5
S5 S6
S6 S6
[Kitting example]
[Binning Information]
WM
SPMWHT541ML5XAWM0 W6, W7, WA, WB
(Quarter bin)
2700
WS
SPMWHT541ML5XAWSS0 W6, W7, WA, WB, WV, WW, WX, WY, WZ
(S Kitting)
WK
SPMWHT541ML5XAWK0 WV, WW, WX, WY, WZ
(K Kitting)
VM
SPMWHT541ML5XAVMS0 V6, V7, VA, VB
(Quarter bin)
3000
VS
SPMWHT541ML5XAVSS0 V6, V7, VA, VB , VV, VW, VX, VY, VZ
(S Kitting)
VK
SPMWHT541ML5XAVKS0 VV, VW, VX, VY, VZ
(K Kitting)
UM
SPMWHT541ML5XAUMS0 U6, U7, UA, UB
(Quarter bin)
3500
US
SPMWHT541ML5XAUSS0 U6, U7, UA, UB , UV, UW, UX, UY, UZ
80 (S Kitting)
UK
SPMWHT541ML5XAUKS0 UV, UW, UX, UY, UZ
(K Kitting)
TM
SPMWHT541ML5XATMS0 T6, T7, TA, TB
(Quarter bin)
4000
TS
SPMWHT541ML5XATSS0 T6, T7, TA, TB , TV, TW, TX, TY, TZ
(S Kitting)
TK
SPMWHT541ML5XATKS0 TV, TW, TX, TY, TZ
(K Kitting)
RM
SPMWHT541ML5XARMS0 R6, R7, RA, RB
(Quarter bin)
5000
RS
SPMWHT541ML5XARSS0 R6, R7, RA, RB, RV, RW, RX, RY, RZ
(S Kitting)
RK
SPMWHT541ML5XARKS0 RV, RW, RX, RY, RZ
(K Kitting)
QS
SPMWHT541ML5XAQSS0 Q6, Q7, QA, QB, QV, QW, QX, QY, QZ
(S Kitting)
QK
SPMWHT541ML5XAQKS0 QV, QW, QX, QY, QZ
(K Kitting)
PM
SPMWHT541ML5XAPMS0 P6, P7, PA, PB
(Quarter bin)
6500
PS
SPMWHT541ML5XAPSS0 P6, P7, PA, PB, PV, PW, PX, PY, PZ
(S Kitting)
PK
SPMWHT541ML5XAPKS0 PV, PW, PX, PY, PZ
(K Kitting)
AY 2.6 ~ 2.7
XA
- - - AZ 2.7 ~ 2.8
(XK)
A1 2.8 ~ 2.9
Region CIE x CIE y Region CIE x CIE y Region CIE x CIE y Region CIE x CIE y
Region CIE x CIE y Region CIE x CIE y Region CIE x CIE y Region CIE x CIE y
Region CIE x CIE y Region CIE x CIE y Region CIE x CIE y Region CIE x CIE y
P rank (6500 K)
Note:
Samsung maintains measurement tolerance of: Cx, Cy = ±0.005
Region CIE x CIE y Region CIE x CIE y Region CIE x CIE y Region CIE x CIE y
Region CIE x CIE y Region CIE x CIE y Region CIE x CIE y Region CIE x CIE y
Region CIE x CIE y Region CIE x CIE y Region CIE x CIE y Region CIE x CIE y
P rank (6500 K)
0.3098 0.3199
0.3177 0.3278
PV
0.3166 0.3384
0.3080 0.3298
Note:
Samsung maintains measurement tolerance of: Cx, Cy = ±0.005
e) Derating Curve
ⓐ ⓑ
• Measurement unit: mm
• Tolerance is ±0.10mm
• Maximum compressing force is 15 N on the body ⓐ
• Do not place pressure on the encapsulation resin ⓑ
Tape Ts
point
Notes:
1) This LED has built-in ESD protection device(s) connected in parallel to LED chip(s).
Precautions:
1) Pressure on the LEDs will influence to the reliability of the LEDs. Precautions should be taken to avoid strong pressure on
the LEDs. Do not put stress on the LEDs during heating.
2) Re-soldering should not be done after the LEDs have been soldered. If re-soldering is unavoidable, LED`s characteristics
should be carefully checked before and after such repair.
3) Do not stack assembled PCBs together. Since materials of LEDs is soft, abrasion between two PCB assembled with LED
might cause catastrophic failure of the LEDs.
a) Test Items
Test
Test Item Test Condition Sample No.
Hour / Cycle
Room Temperature
25 ºC, DC 200 mA 1000 h 22
Life Test
High Temperature
85 ºC, DC 200 mA 1000 h 22
Life Test
High Temperature
60 ºC, 95 % RH, DC 200 mA 1000 h 22
Humidity Life Test
Low Temperature
-40 ºC, DC 200 mA 1000 h 22
Life Test
High Temperature
120 ºC 1000 h 11
Storage
Low Temperature
-40 ºC 1000 h 11
Storage
R1: 10 MΩ
R2: 1.5 kΩ
ESD (HBM) 5 times 30
C: 100 pF
V: ±5 kV
R1: 10 MΩ
R2: 0
ESD (MM) 5 times 30
C: 200 pF
V: ±0.5 kV
1500 g, 0.5 ms
Mechanical Shock Test 5 cycles 11
3 shocks each X-Y-Z axis
6. Soldering Conditions
Not more than 5 seconds @ max. 300 ºC, under soldering iron.
a) Taping Dimension
(unit: mm)
Anode Marks
Taping Direction
500 mm
500 mm
Symbol A B C W1 W2
Notes:
1) Quantity: The quantity/reel is 2,500 pcs
2) Cumulative Tolerance: Cumulative tolerance / 10 pitches is ±0.2 mm
3) Adhesion Strength of Cover Tape: Adhesion strength is 0.1-0.7 N when the cover tape is turned off from the carrier tape
at 10° angle to the carrier tape
4) Packaging: P/N, Manufacturing data code no. and quantity are indicated on the aluminum packing bag
8. Label Structure
a) Label Structure
ⓐⓑⓒⓓⓔⓕ
A1R1S5
Bin Code
SPMWHT541ML5XAR0S0 A1R1S5 01
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
GLAYC4001 / 1001 / 2,500 pcs Product Code
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
Lot Number
Note: Denoted bin code and product code above is only an example (see description on page 5)
Bin Code:
ⓐⓑ: Forward Voltage bin (refer to page 8)
ⓒⓓ: Chromaticity bin (refer to page 10-13)
ⓔⓕ: Luminous Flux bin (refer to page 8)
b) Lot Number
A1R1S5
SPMWHT541ML5XAR0S0 A1R1S5 01
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
①②③④⑤⑥⑦⑧⑨/1ⓐⓑⓒ/ 2,500 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
9. Packing Structure
a-1) Packing Process (The quantity of PKG on the Reel to be Max 2,500pcs)
Reel
A1R1S5
SPMWHT541ML5XAR0S0 A1R1S5 01
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
GLAYC4001 / 1001 / 2,500 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
A1R1S5
SPMWHT541ML5XAR0S0 A1R1S5 01
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
GLAYC4001 / 1001 / 2,500 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
Outer Box
Size (mm)
Type Note
L W H
① Side Label
A1R1S5
SPMWHT541ML5XAR0S0 A1R1S5 01
①
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII H
GLAYC4001 / 1001 / 25,000 pcs LED
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
W
a-2) Packing Process (The quantity of PKG on the Reel to be Max 10,000pcs)
Reel
A1R1S4
SPMWHT541ML5XKR0S0 A1R1S5 01
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
GLAZC4001 / 1001 / 10,000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
A1R1S4
SPMWHT541ML5XKR0S0 A1R1S5 01
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
GLAZC4001 / 1001 / 10,000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
A1R1S4
SPMWHT541ML5XKR0S0 A1R1S5 01
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
GLAZC4001 / 1001 / 150,000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
[Box Label]
② Side Label
A1R1S4
SPMWHT541MP5WKR0S4 A1R1S4 01
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
GLAZC4001 / 1001 / 25,000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
b-1) Packing Process for kitting (The quantity of PKG on the Reel to be Max 2,500pcs)
Reel
Kitting ‘A’ Kitting ‘B’
Kitting ‘A’ Kitting ‘B’
AY◇WS4 AY◇ZS4
SPMWHT541ML5XA◇KS0 AY◇WS4 01 SPMWHT541ML5XA◇KS0 AY◇ZS4 01
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
GLAW94001 / 1001 / 2,500 pcs GLAW94001 / 1001 / 2,500 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
AY◇WS4 AY◇ZS4
SPMWHT541ML5XA◇KS0 AY◇WS4 01 SPMWHT541ML5XA◇KS0 AY◇ZS4 01
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
GLAW94001 / 1001 / 2,500 pcs GLAW94001 / 1001 / 2,500 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
Outer Box
AY◇WS4 AY◇ZS4
SPMWHT541ML5XA◇KS0 AY◇WS4 01 SPMWHT541ML5XA◇KS0 AY◇ZS4 01
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
GLAW94001 / 1001 / 25,000 pcs GLAW94001 / 1001 / 25,000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
[BOX Label] [BOX Label]
Size (mm)
Type Note
L W H
b-2) Packing Process for kitting (The quantity of PKG on the Reel to be Max 10,000pcs)
A1◇WS4 A1◇ZS4
SPMWHT541ML5XK◇KS0 AY◇WS4 01 SPMWHT541ML5XK◇KS0 AY◇WS4 01
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
GLAW94001 / 1001 / 10,000 pcs GLAW94001 / 1001 / 10,000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
A1◇WS4 A1◇ZS4
SPMWHT541ML5XK◇KS0 AY◇WS4 01 SPMWHT541ML5XK◇KS0 AY◇WS4 01
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
GLAW94001 / 1001 / 10,000 pcs GLAW94001 / 1001 / 10,000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
A1◇WS4 A1◇ZS4
SPMWHT541ML5XK◇KS0 AY◇WS4 01 SPMWHT541ML5XK◇KS0 AY◇WS4 01
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
GLAW94001 / 1001 / 10,000 pcs GLAW94001 / 1001 / 10,000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
[BOX Label] [BOX Label]
Size (mm)
Type Note
L W H
LED
A1R1S5
SPMWHT541ML5XAR0S0 A1R1S5 01
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
GLAYC4001 / 1001 / 2,500 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
c) Silica Gel & Humidity Indicator Card inside Aluminum Vinyl Bag
1) For over-current protection, users are recommended to apply resistors connected in series with the LEDs to mitigate
sudden change of the forward current caused by shift of forward voltage.
2) This device should not be used in any type of fluid such as water, oil, organic solvent, etc. When cleaning is required,
IPA is recommended as the cleaning agent. Some solvent-based cleaning agent may damage the silicone resins used
in the device.
3) When the device is in operation, the forward current should be carefully determined considering the maximum ambient
temperature and corresponding junction temperature.
4) LEDs must be stored in a clean environment. If the LEDs are to be stored for three months or more after being shipped
from Samsung, they should be packed with a nitrogen-filled container (shelf life of sealed bags is 12 months at
temperature 0~40 ºC, 0~90 % RH).
5) After storage bag is opened, device subjected to soldering, solder reflow, or other high temperature processes must be:
a. Mounted within 672 hours (28 days) at an assembly line with a condition of no more than 30 ºC / 60 % RH, or
b. Stored at <10 % RH
6) Repack unused devices with anti-moisture packing, fold to close any opening and then store in a dry place.
7) Devices require baking before mounting, if humidity card reading is >60 % at 23 ± 5 ºC.
9) The LEDs are sensitive to the static electricity and surge current. It is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs. If voltage exceeding the absolute maximum rating is applied to LEDs, it
may cause damage or even destruction to LED devices. Damaged LEDs may show some unusual characteristics such
as increase in leakage current, lowered turn-on voltage, or abnormal lighting of LEDs at low current.
10) VOCs (Volatile Organic Compounds) can be generated from adhesives, flux, hardener or organic additives used in
luminaires (fixtures). Transparent LED silicone encapsulant is permeable to those chemicals and they may lead to a
discoloration of encapsulant when they exposed to heat or light. This phenomenon can cause a significant loss of light
emitted (output) from the luminaires. In order to prevent these problems, we recommend users to know the physical
properties of materials used in luminaires and they must be carefully selected.
www.samsungled.com