Scribd
Upload
17 views3 pages

Self Check#1

This document contains 15 multiple choice self-check questions about networking topics such as network topologies, cable types, networking devices and their functions, IP addressing in peer-to-peer networks, and basic networking commands. The questions cover topics like the differences between hubs, switches, and routers; the maximum length of UTP cable; uses of coaxial cable, twisted pair cable, and fiber optic cable; the functions of NICs, bridges, and repeaters; and commands like PING and IPCONFIG. The correct answers to each question are provided in a multiple choice list at the end.

Uploaded by

siifantk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
17 views3 pages

Self Check#1

This document contains 15 multiple choice self-check questions about networking topics such as network topologies, cable types, networking devices and their functions, IP addressing in peer-to-peer networks, and basic networking commands. The questions cover topics like the differences between hubs, switches, and routers; the maximum length of UTP cable; uses of coaxial cable, twisted pair cable, and fiber optic cable; the functions of NICs, bridges, and repeaters; and commands like PING and IPCONFIG. The correct answers to each question are provided in a multiple choice list at the end.

Uploaded by

siifantk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

SELF CHECK QUESTIONS

Instruction I: Choose the best Answer


1. A device that used to connect all nodes in star topology in one place is
A. Repeater B. Hub C. Switch D. B&C
2. The type of network cable that commonly used in TV system
A. UTP B. Coaxial C. fiber optics D. all
3. Terminator in a bus topology is used for
A. to transmit the signal on networks B. Connect all nodes to each other
C. Stop the signal on bouncing over the back bone & make the main cable free
D. all
4. _________ Is a network adopter that is used to connect PC to N/W.
A. NIC B. Bridges C. Repeaters D. none
5. Is device that can be used to connect N/Ws that use different technologies (LANs, MANs
& WANs)
A. Bridges B. Repeaters C. Routers D. Switches
6. Which one of the following is the function of NIC?
A. Prepare data from the computer for the network cable
B.Send the data to another computer
C.Control the flow of data b/n computer & cabling system
D.all of the above
7. The maximum cable length segments of UTP cable is
A.100 meter B.185 meter C.500 meter D. none
8._______cable is good for very high speed, high capacity data transmission.
A. Coaxial cable B. Twisted Pair cable C. Fiber optic cable D.all
9. Which net work device can amplify or regenerate the weak signal
A. Bridge B. Switch C. Repeater D. all
10. Which one of the following net work device used to connect different net work that uses
the same net work protocol?
A. Switch B. Bridge C.HUB D.repeater
11. Which type of cable arrangement is used to connect similar devices?
A. Cross over B. Rollover C. Straight trough D. All
12. A device that are used to connect RJ45 with UTP cable
A. Cable Cutter B. Crimper C.cable taster D. all
13. How many wires are there in cat- 5e UTP Cable?
A.2 Pairs B.4 Pairs C. 8 wires D.B &C
14. Which one of the following is false?
A.In a peer to peer net work configuration two PCs can have the same type of IP
address
B. In a peer to peer net work two PCs must use the same type of work group name.
C. Both PCs have equal right to access a net work
D. All
15. Which net work command is used to check the connectivity status of the net work.
A. PING B. IPCONFIG C. Regedit D. none
Answer
Multiple choices
1. D
2. B
3. C
4. A
5. C
6. D
7. A
8. C
9. C
10. B
11. A
12. B
13. D
14. A
15. B

You might also like