Scribd
Upload
45 views

Hand Pumps Type PM: 2-Plunger

This document provides information on type PM 2-plunger hand pumps from Atos including: - They are double alternate-acting hand pumps with simple construction for minimum service and long life. - They have a bypass valve that connects the delivery ports to the inlet port to allow pumping by alternately moving the lever to move the plungers. - Models are available with displacements from 6 to 20 cm3 and can operate at pressures up to 500 bar, depending on the model.

Uploaded by

Service - Anda Hydraulics Asia Pte Ltd
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
45 views

Hand Pumps Type PM: 2-Plunger

This document provides information on type PM 2-plunger hand pumps from Atos including: - They are double alternate-acting hand pumps with simple construction for minimum service and long life. - They have a bypass valve that connects the delivery ports to the inlet port to allow pumping by alternately moving the lever to move the plungers. - Models are available with displacements from 6 to 20 cm3 and can operate at pressures up to 500 bar, depending on the model.

Uploaded by

Service - Anda Hydraulics Asia Pte Ltd
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Atos spa Table A200-5/E

21018 Sesto Calende, Italy - Fax 0331 920005

Hand pumps type PM


2-plunger

PM are double alternate-acting hand


pumps with simple and rugged
construction for minimum service and
long operating life.

They are provided with one by-pass


valve  which connects directly the
delivery ports with the inlet port through
the delivery valves . The by-pass
valve is operated by a handwheel .
Pumping operation is made by
alternative movement of the lever  and
consequently movement of plungers ,
after having locked the by-pass valve
by means of the handwheel.
The splined shaft attachment 
permits to turn the lever shaft in the
best position.
On the pump body are available two
outlet ports (one supplied plugged).
Suitable for hydraulic oils according to
DIN 51524…535 or synthetic fluids
having similar lubricating
characteristics.
Displacements: from 6 to 20 cm³ for
double stroke.
Pressure up to 500 bar.

1 MODEL CODE
PM - 106 ** /*
Synthetic fluids:
/WG = water-glycol
2-plunger
/PE = phosphate ester
hand pump

Displacement, see section [2]


106 = 6 cm³/double stroke
112 = 12 cm³/ double stroke
120 = 20 cm³/ double stroke Design number

2 OPERATING CHARACTERISTICS with hydraulic fluid having a viscosity of 24 mm²/s and 40°C

Displacement for
Max pressure Shaft rotation angle Maximum torque required
Model double stroke
[bar] [degree] [Nm]
[cm³]
PM-106 6 500 ± 35° 139

PM-112 12 250 ± 35° 133

PM-120 20 120 ± 35° 116

A200
3 MAIN CHARACTERISTICS OF HAND PUMP TYPE PM

Installation position Vertical position, with inlet port facing upward to ensure complete case filling
Commissioning Pumping operation is made by alternative movement of the lever after closing by-pass valve.
Note: the by-pass valve connects the delivery ports with inlet port and when locked it could allow some
leakage from outlet ports.
Two opposite outlet ports are available for pump delivery: one of these is supplied plugged.
The pumps are supplied without lever harm that could made by a simple tube with Ø 18 mm inside
diameter. Usually a lenght of 500 to 600 mm is appropriate.
Lever position can be selected by proper assembling of lever on splined shaft.

Ambient temperature from -20°C to +70°C


Fluid Hydraulic oil as per DIN 51524...535; for other fluids see section [1]
Recommended viscosity 10 ÷ 100 mm²/sec at 40°C (ISO VG 15 - 100)
Fluid contamination class ISO 19/16 (filters at 25 µm value with β25 > 75 recommended)
Fluid temperature T < 70°C, if T > 60°C select /PE seals

4 DIMENSIONS [mm]

IN

By-pass valve

OUT OUT

(with plug on outlet port)

(completely open)

Mass: 4,6 Kg

05/00

You might also like