0% found this document useful (0 votes)
105 views

Transcript

This document is an academic transcript for Furkan Azman from Middle East Technical University in Turkey. It shows that Furkan was enrolled in September 2021 and is studying in the Mechanical Engineering department in the Engineering faculty. It lists the courses Furkan has taken in the 2022-2023 academic year, the credits received for each course, the grades earned, and the grade points. It indicates that Furkan's cumulative GPA is 3.61 and class ranking is 9 out of 210 first year students in the department. The transcript is certified with the university seal and registrar signature.

Uploaded by

kurkek33
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
105 views

Transcript

This document is an academic transcript for Furkan Azman from Middle East Technical University in Turkey. It shows that Furkan was enrolled in September 2021 and is studying in the Mechanical Engineering department in the Engineering faculty. It lists the courses Furkan has taken in the 2022-2023 academic year, the credits received for each course, the grades earned, and the grade points. It indicates that Furkan's cumulative GPA is 3.61 and class ranking is 9 out of 210 first year students in the department. The transcript is certified with the university seal and registrar signature.

Uploaded by

kurkek33
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ÖĞRENCİ İŞLERİ DAİRE BAŞKANLIĞI ORTA DOĞU TEKNİK ÜNİVERSİTESİ

REGISTRAR'S OFFICE
MIDDLE EAST TECHNICAL UNIVERSITY

DUMLUPINAR BULVARI 06800


ÇANKAYA ANKARA/TURKEY
T: +90 312 210 34 17
F: +90 312 210 79 60
[email protected]
www.oidb.metu.edu.tr

You can use this QR code to verify


ACADEMIC TRANSCRIPT this document.

FAMILY NAME AZMAN DATE OF ENTRY September 04, 2021


GIVEN NAME FURKAN DEGREES AWARDED
STUDENT ID 2577591 DATE OF GRADUATION
FACULTY Engineering

py
DEPARTMENT/ Mechanical Engineering
PROGRAM

COURSE CODE COURSE NAME CREDITS GRADE POINTS

Co
2021-2022 Spring
IS100 INTRODUCTION TO INFORMATION TECHNOLOGIES AND 0,00 EX 0,00
APPLICATIONS

2022-2023 Fall
MATH119 CALCULUS WITH ANALYTIC GEOMETRY 5,00 AA 20,00
ENG101 ENGLISH FOR ACADEMIC PURPOSES I 4,00 CC 8,00
PHYS105 GENERAL PHYSICS I 4,00 AA 16,00
CENG240 PROGRAMMING WITH PYTHON FOR ENGINEERS 3,00 AA 12,00
ME117 COMPUTER AIDED ENGINEERING DRAWING 3,00 AA 12,00
OHS101 OCCUPATIONAL HEALTH AND SAFETY-I 0,00 S 0,00

CumGPA: 3,58 GPA: 3,58 STAN: HIGH HONOR 19,00 68,00

2022-2023 Spring
MATH120 CALCULUS OF FUNCTIONS OF SEVERAL VARIABLES 5,00 AA 20,00
CHEM107 GENERAL CHEMISTRY 4,00 BB 12,00
ENG102 ENGLISH FOR ACADEMIC PURPOSES II 4,00 BA 14,00
PHYS106 GENERAL PHYSICS II 4,00 AA 16,00
ME110 INTRODUCTION TO MECHANICAL ENGINEERING 2,00 BA 7,00
BA100 CAREER PLANNING 0,00 S 0,00
OHS301 OCCUPATIONAL HEALTH AND SAFETY - II 0,00 S 0,00
l

CumGPA: 3,61 GPA: 3,63 STAN: HIGH HONOR 19,00 69,00


ia

CumGPA: 3,61 GRAND TOTALS: 38,00 137,00

She/He attended Basic English Department and satisfactorily completed, the semester/s which the student attended Basic
English Department: Fall 2021, Spring 2021
The abovementioned student's class ranking was 9 out of 210 among first (1st) year students in the Department of Mechanical
fic

Engineering in the spring semester of the 2022-2023 academic year.

End of Transcript
No printed lines below this line.
Of

Date: August 1, 2023 Özgür Polat Page 1 / 2


Supervisor
ÖİDB-F06 (R00)
Transcript Information

A transcript issued by Middle East Technical University bears the seal of the University and is signed by the authorized administrator. If
requested, an official transcript which is enclosed in an envelope is provided to the student or delivered to the desired address.

The medium of instruction at Middle East Technical University is English.

One academic year consists of two 16-week semesters, including the period for final exams. Summer semesters may be offered within the
scope of an academic year.

The credit value of a course consists of all of the weekly theoretical course hours plus half of the weekly laboratory, practical, studio, practical
application and other similar course hours.

Courses coded 100-499 indicate undergraduate courses, courses coded 500-999 indicate graduate courses.

The Grading System Letter Grade Grade Point Percentage Grade


AA 4.00 90-100
BA 3.50 85-89
BB 3.00 80-84
CB 2.50 75-79
CC 2.00 70-74
DC 1.50 65-69
DD 1.00 60-64
FD 0.50 50-59
FF 0.00 0-49
Symbols I => Incomplete W => Withdrawn
P => Progressing NA => Exceeded the absenteeism limit
S => Satisfactory NI => Not included in the GPA and Cum.GPA
U => Unsatisfactory GPA => Grade Point Average for the Semester
EX=> Exempted CGPA => Cumulative Grade Point Average

Courses marked (*) are courses that have been repeated and therefore deducted from the CGPA.

Courses marked with the letter (R) are courses whose grades for the semester have been finalized following a
resit exam given to students fulfilling the requirements specified in the concerned regulation after the final
grades for the semester have been announced.

Credit hours with (+) indicate courses counted from another program and are included in computation of CGPA.

Credit hours with (-) indicate courses not included in the program and are not included in computation of CGPA.

Information on Standing (For Undergraduate Programs)

HIGH HONOR : GPA ≥ 3.50 and CGPA ≥ 2.00


HONOR : 3.00 ≤ GPA ≤ 3.49 and CGPA ≥ 2.00
SATISFACTORY : 2.00 ≤ GPA ≤ 2.99 and CGPA ≥ 2.00
SUFFICIENT : CGPA ≥ 2.00, however having FF, FD, NA, U grades
UNSATISFACTORY : CGPA and/or GPA < 2.00
PROBATION : CGPA and Prev. CGPA < 2.00

Information on Standing (For Graduate Programs)

SATISFACTORY : CGPA ≥ 3.00 (within the maximum period of education)


UNSATISFACTORY : CGPA < 3.00 (within the maximum period of education)
PROBATION : Has obtained two consecutive or three intermittent letter grades of “U” for thesis work; has failed twice in the
DoctoralQualifying Exam; has failed to graduate at the end of maximum education period.

Associate Degree Programs: The standard duration of study in such programs is 2 years (4 semesters) and the maximum duration is 4
years (8 semesters). In order to qualify for graduation, the minimum grade required in a course is DD/S and the minimum CGPA is 2.00/4.00.

Undergraduate Programs: The standard duration of study in such programs is 4 years (8 semesters) and the maximum duration is 7 years
(14 semesters). In order to qualify for graduation, the minimum grade required in a course is DD/S and the minimum CGPA is 2.00/4.00.

Non-thesis Graduate Programs Integrated with an Undergraduate Program: The standard duration of study in such programs is 5
years (10 semesters) and the maximum duration is 9 years (18 semesters). In order to qualify for graduation, the minimum grade required in
a course is DD/S and the minimum CGPA is 2.00/4.00.

Compensatory Programs for Graduate Studies: The maximum duration of study in such programs is 1 year (2 semesters). For
satisfactory completion of an undergraduate course, the minimum grade required is CC/S and that of a graduate course is CB/S and the
minimum CGPA is 2.50/4.00.

Master’s Programs with a Thesis: The standard duration of study in such programs is 2 years (4 semesters) and the maximum duration is
3 years (6 semesters). In order to qualify for graduation; the student must have taken at least 7 courses (21 credits) and completed the
dissertation work, the minimum grade required in a course is CC/S and the minimum CGPA is 3.00/4.00.

Master’s Programs without a Thesis: The standard duration of study in such programs is 2 semesters and the maximum duration is 3
semesters. In order to qualify for graduation; the student must have taken at least 10 courses (30 credits), the minimum grade required in a
course is CC/S and the minimum CGPA is 3.00/4.00.

Doctoral Programs: The standard duration of study in such programs is 4 years (8 semesters) and the maximum duration is 6 years (12
semesters). In order to qualify for graduation, the student must have taken at least 7 courses (21 credits), passed the doctoral qualifying
exam, defended her/his dissertation proposal and completed the doctoral dissertation. The minimum grade required in a course is CB/S and
the minimum CGPA is 3.00/4.00.

Post Bachelors’s Doctoral Programs: The standard duration of study in such programs is 5 years (10 semesters) and the maximum
duration is 7 years (14 semesters). In order to qualify for graduation, the student must have taken at least 14 courses (42 credits), given a
seminar, passed the doctoral qualifying exam, defended her/his dissertation proposal and completed the post-doctoral dissertation. The
minimum grade required in a course is CB/S and the minimum CGPA is 3.00/4.00.

After the maximum duration of study has been exceeded, conditions for remaining in a program and the validity of the courses taken are
determined by related regulations.

Detailed information about Regulations can be found at http://oidb.metu.edu.tr.

Date: August 1, 2023 Özgür Polat Page 2 / 2


Supervisor
ÖİDB-F06 (R00)
Powered by TCPDF (www.tcpdf.org)

You might also like