Scribd
Upload
13 views

Elavating Work Platform Instructions

This document provides instructions for safely operating elevating work platforms. It lists 19 steps for setup and use, including ensuring the equipment is stable and used by qualified personnel, not exceeding the equipment's capacity, using outriggers and protective barriers as needed, avoiding power lines, inspecting and maintaining equipment regularly, and following all safety and environmental rules. It also shows examples of different types of elevating work platforms such as basket cranes, aerial lifts, and man lifts.

Uploaded by

miraç burak navruz
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
13 views

Elavating Work Platform Instructions

This document provides instructions for safely operating elevating work platforms. It lists 19 steps for setup and use, including ensuring the equipment is stable and used by qualified personnel, not exceeding the equipment's capacity, using outriggers and protective barriers as needed, avoiding power lines, inspecting and maintaining equipment regularly, and following all safety and environmental rules. It also shows examples of different types of elevating work platforms such as basket cranes, aerial lifts, and man lifts.

Uploaded by

miraç burak navruz
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

ELEVATING WORK PLATFORM (MANLIFT, AERIAL

LIFTS, BASKET CRANES ETC ...) INSTRUCTIONS Page 1/3


NO:26

(INSTRUCTION NO: 26)

ELEVATING WORK PLATFORM (MANLIFT, AERIAL LIFTS,


BASKET CRANES ETC ...) INSTRUCTIONS
Setup
1. Ensure that the mobile or demountable work equipment designed for lifting loads is firmly and
stably installed and used in all the intended use conditions, also taking into account the ground
properties.
Use
2. Ensure that the equipment is used only by qualified personnel assigned to use that equipment.
3. No work will be done with the defective and damaged machine. Ensure that it is repaired.
4. All audible and visual warning systems of mobile machinery will be operational.
5. Load work platforms complying with their specified capacity.
6. If there are outriggers, they must be opened definitely before the platform is raised.
7. According to the ground characteristics, use crawler legs and wedge mats that distribute the
load.(1)
8. Equip the equipment with an audible and flashing light warning system that will be activated
automatically before starting the equipment. (2)
9. Before starting work, make sure that there are guardrails and other security systems on the platform
that prevent falling from height. (3)

10. Make sure that the voltage of the electric line passing through the area of use of the equipment is
cut. If this is not possible, ensure that equipment is kept away from the power line with barriers or
warning signs.
11. Strictly, while working and / or in stationary equipment, the maximum approach distance accepted
for conductors under voltage will not be exceeded according to Article 5 of TEIAS
OCCUPATIONAL SAFETY REGULATION.
If the voltage on the line is unknown, stay at least 4.5 meters away.

1000-15.000 Voltage, between 66 cm


15.001-36.000 Voltage, between 82 cm
59.000-72.500 Voltage, between 110 cm
140.000-170.000 Voltage, between 155 cm
200.000-250.000 Voltage, between 213 cm
340.000-420.000 Voltage, between 352 cm

12. Protect the equipment's control systems from the possibility of causing a dangerous situation as a
result of damage and breakage.
13. Avoid using the equipment on slopes.
14. Fasten the safety belt at the specified place if it is available, or at a suitable place.

EK-GS-01-F026-01
ELEVATING WORK PLATFORM (MANLIFT, AERIAL
LIFTS, BASKET CRANES ETC ...) INSTRUCTIONS Page 2/3
NO:26

15. Certainly, the wheels of the platform will not be moved when the platform is raised. The platform
can be moved only after it is lowered to minimum height.
16. Nobody will be under the platform against the danger of material falling. In fact, the work area
even will be surrounded if necessary.
17. Periodic inspections and maintenance of all work machines shall be done periodically.
18. Be sure to follow the construction site rules, instructions as well as work health and safety and
environmental rules described in the training.
19. Select elevating work platforms according to your work and in accordance with the necessary
security measures.
Different types of elevation work platforms are shown below.

Basket-crane type elevating platforms, aerial lifts

EK-GS-01-F026-01
ELEVATING WORK PLATFORM (MANLIFT, AERIAL
LIFTS, BASKET CRANES ETC ...) INSTRUCTIONS Page 3/3
NO:26

Man-lift type elevating platforms

EK-GS-01-F026-01

You might also like