Scribd
Upload
34 views

Module 6 - Shear and Moment in Beams by Method of Area - ARCH31S6

This document appears to be a set of lecture slides for a class on strength of materials. The lecture covers bending, shear, and moments in beams using the method of areas. It includes intended learning outcomes, definitions of key beam types and loading types, and explanations of shear and moment diagrams. It also includes examples of solving for shear and moments in beams under different loading conditions. The instructor's name and the class name and location are provided.

Uploaded by

Rose Anne Apilado
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
34 views

Module 6 - Shear and Moment in Beams by Method of Area - ARCH31S6

This document appears to be a set of lecture slides for a class on strength of materials. The lecture covers bending, shear, and moments in beams using the method of areas. It includes intended learning outcomes, definitions of key beam types and loading types, and explanations of shear and moment diagrams. It also includes examples of solving for shear and moments in beams under different loading conditions. The instructor's name and the class name and location are provided.

Uploaded by

Rose Anne Apilado
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 39

ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES

ARSC 313 - STRENGTH


OF MATERIALS

ENGR. JEANETH S. BERGANTIN


INSTRUCTOR

ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES


ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES
BENDING; SHEAR AND
MOMENT IN BEAMS BY
METHOD OF AREA

ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES


INTENDED LEARNING OUTCOMES

At the end of the session the students should be able to:

1. be familiar with the concept of shear and moments in beams;


2. be familiar with the internal effects of the external loadings on
beams; and
3. learn to solve the shear and moments in beams.

ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES


ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES
BEAMS

A bar subjected to forces or couples perpendicular to the


longitudinal axis (e.g. supports in buildings and bridges)

Types of stress in beams

1. Shearing Stress - varies directly with shear

2. Bending Stress - varies directly with bending moment

ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES


ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES
ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES
Types of Loads

Concentrated Load - acts at a point on the beam


Distributed Load - acts over a length of the beam

ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES


Shear and Moment Diagram - graphical representation of shear and moment throughout the span
of the beam
Method of Section - V and M as functions of x for each segment of the beam between a change in
loading point or discontinuity in loading
Method of Area - the slope of the shear diagram equals the intensity of the distributed loading; the
slope of the moment diagram is equal to the shear.

ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES


ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES
ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES
Problem No. 1

Solve the given beam below.

ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES


ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES
ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES
ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES
ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES
ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES
Problem No. 2

Solve the given beam below.

ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES


ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES
ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES
ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES
Problem No. 3

Using Method of Area, draw the shear and moment diagram of the figure shown.

ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES


ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES
ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES
Problem No. 4

Using Method of Area, draw the shear and moment diagram of the figure shown.

ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES


ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES
ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES
ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES
ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES
THANK YOU AND
GOOD LUCK

FUTURE
ARCHITECTS!
ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES
CLICK THE “YES”

BUTTON IN THE POLL.

ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES


Problem No. 5

Draw the shear and moment diagram of the figure shown.

ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES


ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES
ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES
ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES
ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES
ARSC 313 – Strength of Materials TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES

You might also like