RAYMING PCB & ASSEMBLY

Rogers Material PCB – Rogers 4003C and Rogers 3003

Eestimate Rogers 4003c and Rogers 3003 PCB Price,Send email

to [email protected]

RayMing is a rogers 4003c pcb and rogers 3003 PCB manufacturer that

can offer high-frequency circuit board manufacturing services with

competitive prices. Simply buy a good High-Frequency PCB at a

reasonable price from us and get the datasheet from our suppliers who

can work for you.

Request Rogers 4003 Ro3003 PCB Quote Now

Rogers RO4003 PCB /Rogers 4003C

The Rogers RO4003 material can be removed with conventional nylon

brushes. Prior to copper plating without electricity, no special treatment is

required. The plate must be treated with conventional epoxy/glass

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

processes. Usually, the removal of drilled holes is not necessary because

the high TG resin system (280 ° C + [536 ° F]) is not prone to discoloration

during drilling. The resin can be removed using a standard CF4 / O2

plasma cycle or a double pass through an alkaline permanganate process

if the stain results from aggressive drilling practices.

The surfaces of the plates can be mechanically and/or chemically

prepared for photoprotection. Standard aqueous or semi-aqueous

photoresists are recommended. Any of the commercially available copper

wipers can be used. All filterable or photographic solder masks normally

used in epoxy/glass laminates adhere very well to the surface of

Rogers RO4003. Mechanical washing of the exposed dielectric surface

prior to application of the solder mask and a designated “registered”

surface should avoid optimal bonding.

Request Rogers 4003c RO3003 Quote Now

HASL and REFLOW:

The baking requirements of RO4000 materials are comparable to those

of epoxy/glass. In general, equipment that does not bake epoxy/glass

plates does not need to bake RO4003 plates. For installations that make

epoxy/bake glass as part of the normal process, we recommend cooking

at 300 ° F 250 ° F (121 ° C-149 ° C) for 1 to 2 hours. RO4003 contains no

flame retardant. It is understood that plates enclosed in an infrared (IR)

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

unit or operating at very low transport speeds can reach temperatures in

excess of 700 ° F (371 ° C). RO4003 can start burning at these high

temperatures. Systems that still use IR reflow units or other devices that

can reach these high temperatures should take the necessary precautions

to ensure that there are no risks.

Life of life:

High-frequency laminates can be stored indefinitely at room temperature

(55-85 ° F, 13-30 ° C) and humidity. At room temperature, the dielectric

materials are inert at high humidity. However, metal coatings such as

copper can be oxidized when exposed to high humidity. Standard

pre-cleaning of PWB can easily remove corrosion from properly stored

materials.

ROUTE:

RO4003 material can be machined using tools and hard metal conditions

commonly used for epoxy/glass. The copper foil must be removed from

the guide channels to prevent smearing.

Request Rogers 4003 Ro3003 PCB Quote Now

Rogers Ro3003 / Rogers 3003

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

Ro3003 is one of Rogers PCB materials are ceramic filled PTFE composites

for use in the commercial microwave and RF applications. This family of

products is designed to provide exceptional electrical and mechanical

stability at competitive prices. Rogers Ro3003 is an excellent dielectric

constant stability over temperature, including the elimination of the

dielectric constant change that occurs at room temperature with PTFE

glass materials. In addition, Ro3003 laminates have a low loss factor of

0.0013 to 10 GHz.

Features and Benefits

 Car radar

 RF Coupler

 Cost-sensitive aerospace applications

 GPS antennas

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

 Low Dielectric Losses: Laminates can be used in applications up to

77 GHz

 Excellent mechanical properties against temperature:

reliable multi-layer plate constructions and tape lines

 Uniform mechanical properties for a wide range of dielectric

constants: ideal for multi-layer plate designs with a range of

dielectric constants and suitable for use with hybrid designs of

multilayer epoxy glass plates.

 Stable temperature and frequency stable dielectric constant – ideal

for bandpass filters, microstrip antennas, and voltage controlled

oscillators

 Low in-plane Coefficient of Coefficient Coincidence: provides more

reliable surface mountings, ideal for temperature-sensitive

applications and excellent dimensional stability

 The manufacturing process in volume: economic price rolled

 Compatible lead-free process

Rogers RO3003 is a ceramic-filled PTFE composite/laminate used in

commercial microwave and RF applications. It offers excellent stability

with a dielectric constant of 3 to 40 GHz at room temperature. The

material has a dissipation factor (Df) of 0.0013 to 10 GHz and is ideal for

bandpass filters, microstrip antennas, and voltage controlled oscillators.

High-performance material for RF and microwave circuits. Rogers

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

RO3003 High-frequency laminate for the generation of microwave

prototypes and high-frequency circuits. These materials have a very low

dielectric loss to use up to 40GHz. We sell two sizes of 4.5 x 6 inches and 9

x 6 inches to keep the enthusiast’s cost.

Request Rogers 4003 Ro3003 PCB Quote Now

Rogers RO3003

 Dielectric constant: 3.00

 Loss factor: 0.0013

 Substrate thickness: 0.02 “(0.5 mm)

 The thickness of copper: 0.5 ounces

 Small size = 4.5 “x 6”

 RO3000 printed circuits

Typical Applications

 Automotive radar applications

 Global Position Satellite Antennas

 Mobile telecommunication systems: power amplifiers and antennas

 Patch antenna for wireless communication

 Satellites for direct transmission

 Data link in cable systems

 Remote meter readers

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

More Reading Guilde:

 Rogers 4350B

 Rogesr 5880

Regarding the manufacturing of Printed Circuit Boards, there are different

materials to use. Among the most common materials used in producing

PCBs are the Rogers 4003 and Rogers 3003. There is a question people

frequently ask. Are there differences between Rogers 4003 and Rogers

3003? You should never assume that you can make both materials from

the same components. Use a standard and high-frequency material for all

PCBs. It is very crucial for us to thoroughly give more explanations on the

distinctive characteristics of the Rogers 4003 PCB material. Many often

assume its properties are the same as the Rogers 3003.

Here, you’ll get an explanation on the variance between the two

components of the Rogers materials. Readers will learn more about the

Rogers 4003 and as well as the 3003. Both have properties that you

cannot find in some other PCB materials. This is because of their

distinctions. You have the right piece in your hands. Simply learn more

about PCB designs.

Request Rogers 4003 Ro3003 PCB Quote Now

What Are Rogers Materials?

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

Rogers

Material

In this part of the article, we will begin with what the Rogers PCB materials

are. The Rogers PCBs are majorly high frequency and hydrocarbon

ceramic materials. It aids an upgraded development in production and its

result is profound. It also decreases cost printed construction that

enables its heating steady. Therefore, it diminishes the electrical damage

or cost that is some wave loss.

The Rogers PCB has some components made from the Flame Retardant

Level 4. This FR4 is present in several PCBs. They are some components of

reflector fiber or adhesive which come with amber foil layered on either a

particular area or both surfaces.

These PCBs play an essential role in the manufacturing of electronic

devices. That is why it is crucial to selectively pick the right components in

the production of PCB. Every designer or engineer must become familiar

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

with the right material for PCB. This is because they mostly play a role in

the works of designs and construction of electronic products.

These boards possess some high-frequency properties. The Rogers

materials are more highly-priced than fiber meth. Also, these materials are

about 6.15 DK or 11 DK. The Rogers PCB is always durable. Also, it often

comes with a steady temperature. It is not the kind of PCB that has a very

unreliable component.

The Rogers PCB elements have about three main groups. These three

categories include the laminates, bonding substances, and the metal

facing or lining. The metal lining is a type of protective covering for the

PCB. It has some resistive settings. The bonding substances include

electrically heating glue and prepreg.

You cannot ignore the world of automation as well as aeronautical

engineering. In the military, this is important for jamming systems. For

amplifiers, and anything related to RF engineering, this is also useful.

Read about Rogers SYRON 7000 PCB here

Request Rogers 4003 Ro3003 PCB Quote Now

What is Rogers 4003?

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

The Rogers 4003 Printed Circuit Board is a PCB model that operates on a

woven reflecting surface. You support it with either tile or hydrocarbon.

Rogers 4003 is a laminate that offers high-speed performance. This is as a

result of its low dielectric loss and tolerance. This high-frequency PCB has

some great features. These include

 A low thermal coefficient of dielectric constant

 Great dimensional stability

 Other mechanical and electrical properties

This PCB features some stunted thermal measurement of dielectric

regularity. It also offers little in-plane extension quantity, and superb

depth stability.

The importance of the RO4003 is well known. It is also crucial for

designers to know the worth of this PCB to designs. It is useful in FR4

production. This includes multifaceted PCB development. It also has some

sturdy lead loose braze modifying compatibility. From the creation along

with material expansion, circuit making to the last constituent assembly,

engineers see to the fabrication of this PCB.

RO4003 PCB has a small dielectric constant because of the little mislaying

of the setting up material. The element is RO4003 C. This element comes

with some compact check on top of the DK. This element misplaces

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

extremely tiny heat intensity. However, it is the most essential for

production.

Benefits of Rogers 4003

You can use the Rogers 4003 on RF microwaves due to its thermal and

electrical properties. This PCB features some very important benefits.

These include:

Unfluctuating electrical criteria

This is one of the key features of this particular PCB. Its electrical

components are firm. This makes it very solid and durable. This is why

designers and engineers can maximally use this PCB for electronic

equipment.

Its dielectric resistance and dropping are quite flat

In a way, it becomes fitting for applications that require colossal frequency

conduct. This PCB can work perfectly for colossal tech devices that

automatically use high frequency.

One can detach the RO4003 PCB component using some regular fiber

brushes

Ordinarily, you don’t need any exceptional procedure to precede the

copper lamination or covering in the absence of electricity. This PCB

PCB Manufacturing & Assembly Services https://www.raypcb.com/
 RAYMING PCB & ASSEMBLY

serves multiple functions. Generally, you can use it for Microstrip. Also, it

is great for cellular radix terminal antennas along with power ampere.

Request Rogers 4003 Ro3003 PCB Quote Now

Ideal for high-frequency applications

Due to the great properties of Rogers 4003, you can use them for

high-frequency applications. This is one good reason why RF microwave

circuit engineers prefer it. It also plays a vital role in the military,

automobile, and telecommunication industries.

Other Facts about RO4003

There are several other facts about the Rogers 4003, users must know.

First, is that an expert electronic designer has to supervise the fabrication

process of this PCB. Its features are simple and its design development is

straightforward. It possesses some unconventional electromagnetic

prevalence. Interestingly, the Rogers 4003 is also useful for applications

requiring frequencies more than 300MHz.

High-frequency PCBs were originally helpful in military operations. With

development, they gradually become more accessible in medical

operations. It is also accessible in contemporary industrial operations.

This is seen in all advanced communication applications across the globe.

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

This PCB is not only appropriately useful for HF applications. It could be

present in any application as long as it can work effectively. The RO4003

PCB possesses some excessive aversion to heat. It also comes with low

power or current sound. Besides, it has little water receptiveness, close

effusiveness related to copper cart as well as low dissolution agent.

Other notable features of this PCB include its possession of high fiber

conversion febricity or condition. It also comes with exceptional

magnitude steadiness. Above all, it is not so difficult to produce in huge

amounts. This makes it so popular in its usage among engineers.

It is paramount to know about the Rogers 4003 dielectric constant of this

PCB. The dielectric material of any PCB is some element that encloses the

coating of a PCB. This could possess some low electric gravity or voltage.

These components are different. They may be some specific alloy oxides,

fiber, phlogopite, porcelain, or some ductile.

Limitations of Rogers 4003

The Rogers 4003 has some restrictions. This is owing to the elements used

in its fabrication process. The components are fixed on hydrocarbons. The

effect primarily is that the hydrocarbon element is prone to certain

changes.

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

This is in relation to its risk to oxidative conditions for an extended period

of time. You must not overly expose the RO 4003 to harsh thermal

expansion. Its dielectric features start to alter gradually in such a scenario.

The solder mask on Rogers 4003 PCB basically halts terse circuits in the

PCB. Although the use of a solder mask is not a must for Roger 4003 PCB.

Irrespective of the distribution of shielding to the PCB, the solder mask

can also discordantly change the conduct of the PCB. That is the reason

one may consider using the liquid form of a solder mask.

Request Rogers 4003 Ro3003 PCB Quote Now

What is Rogers 3003?

The Rogers 3003 is also a high-frequency PCB. Its elements are PTFE

compounds meant for use in some materialistic microwave with an RF

operation. The Rogers 3003 is common in designs. This is because it is

durable and quite affordable.

It gives excellent solidity with some dielectric constant which is about 3

to 40 GHz within room febricity. The element has a dissolution component

of not less than 0.0013 to 10 GHz. Also, it is perfect for band pass filters,

microstrip antennas, as well as electron-regulated oscillators.

Rogers 3003 is a high-frequency, ceramic-filled PTFE laminate applicable

for use in RF and microwave applications. This laminate belongs to the

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

RO3000 series. This is why it possesses consistent mechanical properties

irrespective of the dielectric constant needed.

The RO3003 possesses some unique features of a dielectric constant of

3.00. Others include a loss agent of about 0.0013 with its substrate

diameter of about 0.02. The density of its copper is within the range of 0.5

ounces.

Its enlargement measurement is equivalent to the extension

measurement of copper. This additionally makes the components possess

some great proportional firmness. It is noteworthy that its regular plate

reduction is not more than 0.5 inches. Its Z center line CTE is about 24

ppm. This is greatly unique to this PCB. Thus, it supplies very good coating

via hole dependability irrespective of being in a severe thermal domain.

Benefits and Features of Rogers 3003

Interestingly, there are so many things to know about this PCB. Let us

consider where you can use this extensively. You can use it for locomotive

sonar systems. Also, you can use it for mobile telecommunication

operations which involve power amplifiers as well as antennas. You can

also use it for satellites meant for straight transferral. It has a data

connection in cord techniques.

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

This PCB has some superb automatic features against cold. It has trusted

manifold plate creation with tape cords or bars. It comes with several

advantages for designs. These benefits make it easier for engineers and

designers to construct without challenges. It possesses some

cost-responsive aerospace systems.

It has invariable and steady mechanical components for an extensive

array of dielectric constants. Also, it is most applicable for use with

crossed and blended patterns of a multifaceted bond of fiber plates.

This PCB is one of the best for electrical circuits. It allows for the free flow

of electrons. It can also regulate the temperature in a certain environment.

Among the Rogers PCBs, this is arguably one of the most common types.

One of the major reasons engineers prefer it is its low dielectric loss. This

board is good at high temperatures. It can work within a range of not less

than 10GHz. This design is also for good mechanical support. It has some

polytetrafluoroethylene elements present in it.

Modern industrial science and systems make use of this type of PCB.

Selecting the appropriate component is unarguably the most evaluative

choice in the fabrication procedure of this PCB. If you don’t use the right

material for the fabrication, it will affect the outcome of production.

Request Rogers 4003 Ro3003 PCB Quote Now

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

What Is The Difference Between Rogers 4003 and Rogers

3003?

rogers

4003 pcb board

People sometimes assume that both classes of the Rogers PCBs are the

same. As much as they may share few similarities, they have their distinct

differences. In this part of the article, we shall focus on what these

differences are.

Fabrication

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

In terms of fabrication, the Rogers 4003 is different from Rogers 3003. As

you already know, you can strip off the Rogers 4003 PCB using typical

polyester brushes. This is because preceding the copper lamination, you

don’t need any peculiar analysis. You can construct the RO4003

component using some tools. Also, some steely foil methods generally

used for patterns sealant or glass have their effects on this PCB.

The fabrication procedure requires varying techniques. This is the same

way the selection of materials for fabrication is different. Both PCBs do not

follow the same production or construction process. The materials used

for both are separate components. You can fabricate the Rogers 3003 into

the PCB utilizing the processing techniques of the PTFE circuit board.

Temperature Management

The temperature management for both PCBs differ. Although they could

have some high dissolution components, the way temperature control

happens differs in both PCBs. One ranges between 6.15 to about 11.6.

Both do not operate at the same pace.

The Rogers PCB can work even in fierce environmental conditions. The RO

4003 works differently from the R0 3003 as a result of environmental

factors; although, both can work in any environment. The Rogers 4003

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

comes with a better thermal control owing to the high thermal voltage or

gravity when weighing the differences with some PTFT constructed PCBs.

Cost of production

Also, the cost of production for both PCBs differs. Although they are both

expensive because they both involve the use of technical tools in

production, the price of the Rogers 3003 is lower when compared to the

Rogers 4003. They have different costs. Some companies focus more on

the latter than the former. However, designers cannot neglect both PCBs.

Request Rogers 4003 Ro3003 PCB Quote Now

Installation

Installation requires strict supervision. Designers should note that

basically for the Rogers 4003, they should never install it carelessly. This

PCB has some low loss potential with firm control. The installation of both

PCBs is different. They may have few similarities. However, you shouldn’t

do this following the same instructions.

The glass composites of both PCBs do not share the same materials. Over

time, people have always tried to compare the composites of each foil and

fiber. They both come with different properties.

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

Both are mostly present in electrical devices. From the power amplifiers to

the direct transmitter to the military applications, you need these PCBs.

However, you need to use them in different proportions for their voltage.

It is interesting to note that the Rogers 4003 PCB uses the pattern related

to the 1080 glass.

Datasheets

Both PCBs have different data sheets that come with their models. People

sometimes assume they come with the same PCB sheet. However, due to

their different patterns, they have different datasheets.

The datasheets of these PCBs provide information regarding their thermal,

electrical, and mechanical properties. When you go through their

datasheets, you will realize that these properties differ between both

PCBs.

Composite

Rogers 4003 is a ceramic laminate reinforced with glass. This laminate is

not PTFE and as such, it is different from Rogers 3003. Rogers 3003 is a

PTFE-based laminate that is utilized in radiofrequency and microwave

applications. You can use this laminate in applications of about 77 GHz.

Applications

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

Although you can use the Rogers 4003 and Rogers 3003 in some

applications, each of these materials performs better in some applications.

Rogers 3003 is suitable for applications such as advanced driver

assistance systems, 5G wireless infrastructure (mm wave), and automotive

radar (77 GHz).

You can use the Rogers 4003 majorly in high-performance applications.

These include LNB’s for broadcast satellites, sensors and radar for

automobiles, and RF identification tags among others.

Request Rogers 4003 Ro3003 PCB Quote Now

Properties

These two Rogers laminates feature different mechanical, thermal, and

electrical properties. For instance, Rogers 3003’s thickness ranges

between 0.13 to 1.52 mm. The thermal conductivity for RO3003 is 0.50

W/m/K while that of RO4003 is 0.71 W/m/K.

The dissipation factor of RO3003 is 0.0010 at 10GHz. You can measure

that of Rogers 4003 at 0.0027 at 10GHz. This shows that the compositions

of these laminates differ.

Storage

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

Users should keep the Rogers 3003 laminates at ambient conditions. Keep

it at room temperature.

Testing

All Rogers laminates undergo testing to ensure they meet up the

appropriate standards. For Rogers 4003 laminate, some of the IPC

standards are IPC-6013, MIL-P-50884, and IPC-6018. These tests help to

detect lamination-peel strength, mechanical strength, and electrical

conductivity.

For Rogers 3003, advanced testing technology is applied to determine the

quality of the laminate. These tests include E-test, impedance control,

and X-Ray. Rogers 3003 laminates undergo surface treatment.

Frequently Asked Questions

How Long Does Rogers PCB Last?

Engineers always inquire about the perfect materials for the construction

of the PCB. This is because many people are mostly concerned about their

durability.

This high-frequency board can last for a very long time. This depends on if

you don’t expose it to harmful environmental conditions. This board is

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

really essential to electrical devices. It helps with the life span of your

devices. With Rogers PCB, you are sure of its long life.

The most popular component of this board is the glass fiber. This material

is essential because the construction of the PCB is solely on it. In certain

electrical circuits, this PCB can last an entire lifetime. This is when it has

superb dimensional firmness.

Everything starts with the construction and ends with its usage. An expert

engineer can build a solid PCB. So far you follow the appropriate

fabrication procedures.

Can I use Rogers PCB In any Industry?

Many people assume only specific industries can use this PCB. The truth is,

with the advent of technology, there has been more advancement in the

production of any PCB. The Rogers PCB may be more common to

industries like the military, medical, tech, media, among many others.

However, every industry or person interested in constructing solid PCB

can ensure they build one. The most crucial thing is to adhere to the

fabrication processes. That is why an expert engineer should always help

with installation.

Conclusion

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

You can use the Rogers PCB properly in various industries. The

telecommunication industry is one of the most popular industries to apply

the use of this material. It is crucial for all communication systems and

every microwave device.

This article has focused on the benefits of both the Rogers 4003 PCB and

the Rogers 3003 PCB. Each may have unique features, but they have their

differences. The main purpose of this article is to provide detailed

information on that.

The fabrication procedure of RO 4003 differs from RO 3003. They have a

high frequency. They last long. Different industries may end up using

varying Rogers PCB in construction. The airplane industry, as well as the

media, has advanced the use of the PCB. The standard glass is paramount

to fabrication. It is easy to construct.

Related Posts:

1. What is Rogers Ro4003c Material?

2. Rogers Substrate:rogers film,rogers prepreg, rogers Metal Claddings

3. Panasonic MEGTRON7 R-5785 PCB Material – An Ultra-low Loss

Multi-layer PCB Material

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

4. Isola IS420 PCB Material: A High Performance Prepreg Material and

Laminate for Your Printed Wiring Board

https://www.raypcb.com/rogers-material-pcb-rogers-4003-and-rogers-3003/

PCB Manufacturing & Assembly Services https://www.raypcb.com/