Scribd
Upload
17 views

Reinforcement Sec 1 Flange

This document summarizes the design results for an RC beam with a span of 850 mm. It provides the section properties, bending moment capacity, and shear capacity calculations at different points along the beam. The required reinforcement is 385.9244 mm^2 for the top and bottom reinforcement with stirrups of 2.0-#3 bars spaced at 110 mm. The bending moment and shear capacities exceed the design values at all points along the beam.

Uploaded by

flawedbot123
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
17 views

Reinforcement Sec 1 Flange

This document summarizes the design results for an RC beam with a span of 850 mm. It provides the section properties, bending moment capacity, and shear capacity calculations at different points along the beam. The required reinforcement is 385.9244 mm^2 for the top and bottom reinforcement with stirrups of 2.0-#3 bars spaced at 110 mm. The bending moment and shear capacities exceed the design values at all points along the beam.

Uploaded by

flawedbot123
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

MIDAS/Civil RC Beam Design Result

Company Project Title


Author File Name C:\...\MIDAS models\Section 1.mcb

1. Design Information
Design Code Eurocode2-2:05
Unit System kN, mm
Material Data fck = 0.04, fyk = 0.413686, fyw = 0.413686 kN/mm^2
Beam Span 850 mm
Section Property Top flange (No : 1)

2. Section Diagram
[END-I] [MID] [END-J]
25

25

25
200

200

200
25

25

25
1000 1000 1000

TOP 385.92 mm^2 TOP 385.92 mm^2 TOP 385.92 mm^2


BOT 385.92 mm^2 BOT 385.92 mm^2 BOT 385.92 mm^2
STIRRUPS 2.0-#3 @110 STIRRUPS 2.0-#3 @110 STIRRUPS 2.0-#3 @110

3. Bending Moment Capacity


END-I MID END-J
Negative Moment (M_Ed) 10382.58 8597.58 5751.49
(-) Load Combination No. 2 2 2
Factored Strength (M_Rd) 23803.70 23803.70 23803.70
Check Ratio (M_Ed/M_Rd) 0.4362 0.3612 0.2416

Positive Moment (M_Ed) 4565.20 4525.60 4565.20


(+) Load Combination No. 3 3 3
Factored Strength (M_Rd) 23803.70 23803.70 23803.70
Check Ratio (M_Ed/M_Rd) 0.1918 0.1901 0.1918

Required Top As 385.9244 385.9244 385.9244


Required Bot As 385.9244 385.9244 385.9244

4. Shear Capacity
END-I MID END-J
Load Combination No. 3 3 3
Factored Shear Force (V_Ed) 13.44 10.41 10.78
Shear Strength by Conc.(V_Rdc) 109.57 109.57 109.57
Shear Strength by Rebar.(V_Rds) 73.11 73.11 73.11
Required Shear Reinf. (Asw) 141.9352 141.9352 141.9352
Required Stirrups Spacing 2.0-#3 @110 2.0-#3 @110 2.0-#3 @110
Check Ratio 0.1227 0.0950 0.0984

Modeling, Integrated Design & Analysis Software Print Date/Time : 11/22/2023 11:12
http://www.MidasUser.com
MIDAS/Civil V 8.8.5 LAN

You might also like