Scribd
Upload
28 views

303-06A+Starting+System

The document describes the starting system for 1.0L EcoBoost engines, which uses a one-touch integrated start. It contains the location of starting system components like the start/stop button and battery. It also provides an overview of the one-touch starting process, which is automatically controlled by the engine management system to start the engine immediately while preventing starter damage. The removal and installation procedure for the starter motor on a 6-speed manual transmission vehicle is also outlined.

Uploaded by

P Handoko
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
28 views

303-06A+Starting+System

The document describes the starting system for 1.0L EcoBoost engines, which uses a one-touch integrated start. It contains the location of starting system components like the start/stop button and battery. It also provides an overview of the one-touch starting process, which is automatically controlled by the engine management system to start the engine immediately while preventing starter damage. The removal and installation procedure for the starter motor on a 6-speed manual transmission vehicle is also outlined.

Uploaded by

P Handoko
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Print Page 1 of 1

Starting System - 1.0L EcoBoost (74kW/100PS)/1.0L EcoBoost


(90kW/120PS)/1.0L EcoBoost (103kW/140PS) (YY) - Starting System -
Component Location
Print

Description and Operation

One Touch Integrated Start (OTIS)

cardiagn.com
Item Description
1 Start/Stop button
2 Ignition lock
3 Battery
4 CJB (central junction box)
5 Audio unit
6 Starter motor
7 PCM (powertrain control module)

https://www.etis.ford.com/workShopManuals.do?language=en&country=US&variantI... 21.01.2020
Print Page 1 of 1

Starting System - 1.0L EcoBoost


(74kW/100PS)/1.0L EcoBoost
(90kW/120PS)/1.0L EcoBoost
(103kW/140PS) (YY) - Starting System -
Overview
Print

Description and Operation

One-Touch starting system


The One-Touch starting system is incorporated in the PCM (powertrain control module) on
vehicles with the keyless vehicle system as well as conventional starting systems.
The starting process is initiated by briefly pressing the start button or briefly turning the
ignition key to position 3. The clutch must be disengaged or the brake pedal pressed during
this process.
The starting process is automatically controlled by the engine management system. The
starter motor turns until the engine runs. It is switched off as soon as a certain engine
speed threshold is reached.

Advantages:
• Engine starts immediately.

cardiagn.com
• The starter motor will not be damaged.
• No stalling of the engine.

NOTE: If the engine does not start, the starter motor is switched off after a certain time.
Damage caused by overheating can thus be prevented. The engine can then only be
started again after a cooling down period of up to 30 minutes.
NOTE: If there is a fault in the CPP (clutch pedal position) switch or the BPP (brake pedal
position) switch, if the vehicle has a manual transmission it is possible to start the vehicle
by pressing the clutch pedal and the brake pedal at the same time. The ignition key or
start button must be held on until the engine runs.

https://www.etis.ford.com/workShopManuals.do?language=en&country=US&variantI... 21.01.2020
Print Page 1 of 3

Starting System - 1.0L EcoBoost (74kW/100PS)/1.0L EcoBoost


(90kW/120PS)/1.0L EcoBoost (103kW/140PS) (YY) - Starter
Motor—6-Speed Manual Transmission – 6MX65
Print

Removal and Installation

Removal
NOTE: Removal steps in this procedure may contain installation details.
1. Refer to: Air Cleaner (303-12A Intake Air Distribution and Filtering, Removal and
Installation).
2.

cardiagn.com
3. Refer to: Gearshift Cable Adjustment (308-06B Manual Transmission External Controls,
General Procedures).

4. Torque: 25 Nm

https://www.etis.ford.com/workShopManuals.do?language=en&country=US&variantI... 21.01.2020
Print Page 2 of 3

cardiagn.com
5. Torque: 25 Nm

6. Refer to: Jacking and Lifting (100-02 Jacking and Lifting, Description and Operation).
7.

https://www.etis.ford.com/workShopManuals.do?language=en&country=US&variantI... 21.01.2020
Print Page 3 of 3

cardiagn.com
8.
1. Torque: 6 Nm

2. Torque: 12 Nm

3. Torque: 25 Nm

Installation

1. To install, reverse the removal procedure.

https://www.etis.ford.com/workShopManuals.do?language=en&country=US&variantI... 21.01.2020

You might also like