TRANSDUCERS -SENSORS TRAINER

MODEL PCT 046

SCI-TECH UK LIMITED
(Registration No: 1293368) (ISO 9001:2015 Certified, No: QMS/024098/0921)
Kemp House, 160 City Road, London EC1V 2NX, UNITED KINGDOM
Tel: ++ 44 2081238067

[email protected] - [email protected] - [email protected] www.scitechdidactic.com

 Salient Features
 Aesthetically designed injection moulded electronic desktop cabinets.
 Master unit carrying useful experiment resources like Power supplies, DPMs,
Computer Interface, Bar graph LED indicator, Function Generator etc. while the central
slot will carry replaceable experiment panel secured in an ABS molded plastic sturdy
enclosure.
 Has colorful screw less overlay showing circuit & its connection tag numbers for easy
connectivity.
 Hands on learning emphasized. Set of Users Guide provided with each Unit
 Virtual instrumentation (optional) through Computer interface

 Master unit
 Built in power supply
DC supply +/- 12V,500mA, Variable 7V to 14V @ 3Amp: For torque measurement
experiment.
 Built in function generator: O/p waveform- sine, triangle & square , TTL; O/p freq.-
1Hz to 200KHz in ranges with amplitude & freq. control pots, o/p voltage 10Vpp.
 On board measurement: DC volt –2V/20V1no. & LED BAR graph with 10 LED indicator
to display 0-2.5V or 0-4V input.
 On board Wheatstone Bridge: Centre frequency 465KHz; output 4W; Slide scale
micrometer control with 25mm range, 0.5mm/full rotation micrometer.
 Computer interface (Optional): Interfacing through 25 pin parallel port (LPT port).
Software for virtual instrumentation with parallel port driver supplied.
4 ADC channels : 0 to 2.5V full scale
1 DAC channel : o/p 2.5 V full scale
V to I Function block : Input : 0-2.5Vdc
Output : 0-20 or 4-20mA, upto max. 2Vdc gnd compliance

 Mechanical Dimensions : a) Master Unit : 400mm(W), 125mm (H), 270mm(D)

Net weight: 8Kg. Gross weight: 10Kg.
b) Panel : 215mm(W), 165mm(H), 40mm(D)
Net weight: 700gm approx.
 Operating voltage : 220-240V +/- 10%,50Hz

Modular experiment panels

Following experiment panels normally work in conjunction with Master Unit. However they
can be ordered as stand alone units with built in power supply at slightly extra cost optionally
along with Digital 3.5 digit DMM.

Modules offered with input transducers:

 Carbon track, wire-wound and precision rotary potentiometers Model MIT-1
o Range : 0 ~ 25 mmAdjust fine: 0.01 mm

 Slide Potentiometer Model MIT-2: Range : 0 ~ 25 mmAdjust fine: 0.01 mm

SCI-TECH UK LIMITED
(Registration No: 1293368) (ISO 9001:2015 Certified, No: QMS/024098/0921)
Kemp House, 160 City Road, London EC1V 2NX, UNITED KINGDOM
Tel: ++ 44 2081238067

[email protected] - [email protected] - [email protected] www.scitechdidactic.com

  Temperature Sensing Transducers Model MIT-4: Instrumentation Amplifier to
amplify thermocouple signals
Built in heat bar / mini oven driven by Power amplifier of sufficient wattage
Temp. selection upto 95 degree C in 5 ranges with ON / OFF closed loop
control.
o Temp. sensors:- i) Thermocouple J with room temp. calibration pot.
o ii) Thermocouple K with room temp. calibration pot.
o iii) Thermister (100K) iv) PT100
o v) IC sensor (AD 590) vi) Bimetallic
switch
 C. Temperature Sensors Model MIT-5
 Photoconductive Cell Model MIT-6: Incandescent lamp with variable intensity
 Light sensors : i) Photodiode with I to V converter
 ii) Phototransistor with I to V converter
 iii) Photo resistor/LDR with R to V converter using constant
current source.
 iv) Photovoltaic cell / Solar cell
 v) Opto coupler, Laser diode, Infrared LED, Red LED
 Optional ADD ON
o a) Elementary Fiber Optics : 3 nos of transmitter diodes (RED (660nm) /
BLUE / IR (950nm),1 no detector (photo transistor),1m PMMA Cable Step
Index Type (CRI=1.492, NA=0.5) with SMA Connector I/P’s- TTL&AC
Coupled (0.4Vp-p), O/P’s- AC, DC Coupled & TTL O/P, Band Width : Analog
=10Khz, Digital = 50Khz
 Experiments performed: Setting up ANALOG LINK (Study DC
Characteristics & frequency response of different transmitter diodes),
Setting up DIGITAL LINK (observe effect of varying square wave
frequency on receiver output). Needs external FG.
o b) Optical filters for Red, Green, Blue & Yellow colour to determine
sensitivity transducers for colours.

 Photo Voltaic Cell Model MIT-7

 Photo Transistor Model MIT-8: Incandescent lamp with variable intensity
Light sensors :
o Photodiode with I to V converter
o Phototransistor with I to V converter
o Photo resistor/LDR with R to V converter using constant current source.
o Photovoltaic cell / Solar cell
o Opto coupler, Laser diode, Infrared LED, Red LED
PIN Photo Diode Model MIT-9
 Linear Variable Differential Transformer Model MIT-10: Size: 67mm (approx.)
Resistance : 1k ohm
 Linear Variable Capacitor Model MIT-11
 Strain Gauge Model MIT-12: Piezo resistive transducer for strain measurement
Micrometer 0-20mm (Accuracy 0.01mm) for strain generation
Strain gauges in half & full Wheatstone bridge arrangement.
Zero & span adjustment for calibration with instrumentation amplifier.

SCI-TECH UK LIMITED
(Registration No: 1293368) (ISO 9001:2015 Certified, No: QMS/024098/0921)
Kemp House, 160 City Road, London EC1V 2NX, UNITED KINGDOM
Tel: ++ 44 2081238067

[email protected] - [email protected] - [email protected] www.scitechdidactic.com

 Experiments on Gauge factor determination, Strain indicator, Displacement
measurement using Strain gauges & cantilever.
Optional Add-ons: Provision to connect external strain gauge based application set
ups as follows.
Piezo resistive transducer for pressure measurement (0-15psi) (cannot share with
Level setup) Pressure sensor 0-15 psi , gage type, Pressure
generating hand-pump connected using T connector to the sensor & Bourden
pressure gauge for measurement & calibration
Piezo electric transducer for impact measurement with attenuator & peak detector.
Force / Weight measurement using piezo transducer (0-20 kg weighing scale
sensor).
Level measurement by measuring water column height using pressure sensor
by bubbler method in 400mm calibrated acrylic water tank, water pump,
vibratory air pressure pump, manual bypass valve mounted on a compact
(190mm x 1000mm) panel.
 Torque measurement setup consisting of trunnion mounted 1/4HP single phase
230Vac universal motor, piezo resistive force / torque sensor, loading pulley with 5kg
spring balance (2Nos.).

 Air Flow Sensor Model MIT-13: Contain a variety of units that are common to the
measurement of air flow.
Consist of Differential Pressure Module and Paddle Wheel type Flow meter Module.
 Pressure Sensor Model MIT-14: Covers the main methods of measuring for
pressure in various applications.
Piezo resistor sensor which can use to read pressure of liquids and gasses
Transducer
- Resistive Pressure Transducer with transparent
enclosure.
- Pressure of 0-300mm hg / 6psi
- Primary Excitation voltage of 5V DC

 Slotted Opto Sensor Model MIT-15

 Reflective Opto Sensor Model MIT-16: Input : 24 VDCOutput state : Light ON, Dark
ON Sensing object :
Opaque,
 Inductive Proximity Sensor Model MIT-17: Input : 24 VDCLoad Current : 400 mA
Sensing Range : 20 mm;
Rotational speed module with inductive proximity sensor, which can be used to
demonstrate aspect of speed
control for rotational motion system
 Precision Servo Potentiometer Model MIT-18
 Hall Effect Sensor Model MIT-19
 Tacho-Generator Model MIT-20
 Humidity Sensor Model MIT-21: Input: 5 VDC
 Dynamic Microphone Model MIT-22
 Infrared Sensor Module Model MIT-23: Input : 24 VDCOutput state : Light ON,
Dark ON Sensing object : Opaque,

SCI-TECH UK LIMITED
(Registration No: 1293368) (ISO 9001:2015 Certified, No: QMS/024098/0921)
Kemp House, 160 City Road, London EC1V 2NX, UNITED KINGDOM
Tel: ++ 44 2081238067

[email protected] - [email protected] - [email protected] www.scitechdidactic.com

  CDS Sensor Module Model MIT-24
 Load Cell Sensor Module Model MIT-25: Input : 10 VDCOutput: NPN transistor
open -collectorOperate With Load Cell Transmitter panel
 Load Cell Transmitter Module Model MIT-25T: Input : 5 VDCopen - collector
Operate with Load Cell module
 Gas Sensor Module Model MIT-26
 Current Sensor Module Model MIT-27
 Encoder Module Model MIT-28
 Supersonic Sensor Module Model MIT-29
 Speed Sensing Transducers Module Model MIT-29A
12V DC motor with speed varying from 0-4000 rpm & rotating slotted wheel
having 8 slots,
Individual signal conditioning circuit with programmable threshold comparator.
F to V Converter with span & zero amplifier.
Speed transducers :- i) Magnetic pickup ii) Photo reflective iii) Photo
interruptive iv) Inductive pickup with envelop detector v) Stroboscope
vi) Hall sensor
Optional ADD ON :
Flow measurement - Compact, lightweight arrangement of size (190mm X 700mm)
with small water pump , turbine flow sensor (200LPH ) & rotameter (200LPH).,15Lt.
plastic water tank.

 Displacement Sensing Sensor Model MIT-30: Micrometer 0-20mm/(Accuracy

0.01mm)
Precision phase sensitive rectifier
Measurement frequency of 1KHz sine wave @ 2Vpp.
Zero & span adjustment for calibration of following transducers
i) Resistive linear transducer 0 - 20mm
ii) Capacitive linear transducer 0 - 20mm
iii) Capacitive angular transducer 0 - 90 degree
iv) Inductive linear transducer 0 - 20mm
v) LVDT transducer 0 - 20mm or ( -10mm to +10mm)
Optional ADD ON
Level measurement by capacitance transducer using 600mm calibrated acrylic water
tank, water pump, manual flow valve mounted on compact light weight
(190x1000mm) panel.
Level measurement by rotary pot transducer using 600mm calibrated acrylic water
tank, water pump, manual flow valve mounted on compact light weight
(190x1000mm) panel.
Mounted resistive rotary transducer attachment 0 – 1800Span
Humidity measurement demonstrator using polymer hybrid sensor.
 Sound Sensing Sensor Model MIT-31:
40KHz gated oscillator to generate Ultrasonic sound waves.
V to I function block to convert voltage O/P into 4 to 20mA current loop.

SCI-TECH UK LIMITED
(Registration No: 1293368) (ISO 9001:2015 Certified, No: QMS/024098/0921)
Kemp House, 160 City Road, London EC1V 2NX, UNITED KINGDOM
Tel: ++ 44 2081238067

[email protected] - [email protected] - [email protected] www.scitechdidactic.com

 Sound Sensors : i) Ultrasonic Distance Measurement.
o ii) Dynamic microphone as Sound / Audio sensor.

 Bourdon Gauge Model MIT 32: Range : 0 ~ 10 Kg/cm2, 0 ~ 150psi

 Magnetic Float Reed Switch Sensor Model MIT 36: Input: 24 VDCSensor type:
Reed switchOperate with Level control panel
 Level Control Sensor Model MIT 38: Input: 24 VDCOutput type: Relay NO/NC
Operate with Magnetic Float panel
 Process Controller Module Model MIT 068P: Input : 100 ~ 240 VAC (approx.)Input
type: Thermocouple, RTD Output type: Relay NO

Specifications, model photos and design subject to changes without any notice

SCI-TECH UK LIMITED
(Registration No: 1293368) (ISO 9001:2015 Certified, No: QMS/024098/0921)
Kemp House, 160 City Road, London EC1V 2NX, UNITED KINGDOM
Tel: ++ 44 2081238067

[email protected] - [email protected] - [email protected] www.scitechdidactic.com

SCI-TECH UK LIMITED
(Registration No: 1293368) (ISO 9001:2015 Certified, No: QMS/024098/0921)
Kemp House, 160 City Road, London EC1V 2NX, UNITED KINGDOM
Tel: ++ 44 2081238067

[email protected] - [email protected] - [email protected] www.scitechdidactic.com