Scribd
Upload
60 views

UI 3280CP M GL - Rev - 2

This document provides specifications for the UI-3280CP-M-GL Rev.2 camera model. It has a 5 megapixel CMOS sensor with a global shutter, 12-bit ADC, and Sony IMX264LLR-C sensor. Key features include line scan mode, overlap trigger, and sensor source gain control. The camera has a USB 3.0 interface, 8-pin I/O connector, and C-mount lens option. Environmental operating conditions are 0-55°C and 20-80% humidity.

Uploaded by

vivekgreen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
60 views

UI 3280CP M GL - Rev - 2

This document provides specifications for the UI-3280CP-M-GL Rev.2 camera model. It has a 5 megapixel CMOS sensor with a global shutter, 12-bit ADC, and Sony IMX264LLR-C sensor. Key features include line scan mode, overlap trigger, and sensor source gain control. The camera has a USB 3.0 interface, 8-pin I/O connector, and C-mount lens option. Environmental operating conditions are 0-55°C and 20-80% humidity.

Uploaded by

vivekgreen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

UI-3280CP-M-GL Rev.

2 (AB00850)

In series
The model is in series and available for the long term.

Specification

Sensor
Sensor type CMOS Mono
Shutter Global Shutter
Sensor characteristic Linear
Readout mode Progressive scan
Pixel Class 5 MP
Resolution 5.04 Mpix
Resolution (h x v) 2456 x 2054 Pixel
Aspect ratio 5:4
ADC 12 bit
Color depth (camera) 12 bit
Optical sensor class 2/3"
Optical Size 8.473 mm x 7.086 mm
Optical sensor diagonal 11.05 mm (1/1.45")
Pixel size 3.45 µm
Manufacturer Sony
Sensor Model IMX264LLR-C
Gain (master/RGB) 24x/4x
AOI horizontal same frame rate
AOI vertical increased frame rate
AOI image width / step width 256 / 8
AOI image height / step width 2/2
AOI position grid (horizontal/vertical) 4/2
Binning horizontal same frame rate
Binning vertical same frame rate
Binning method M/C automatic
Binning factor 2
Subsampling horizontal same frame rate
Subsampling vertical increased frame rate
Subsampling method M/C automatic
Subsampling factor 2, 4, 6, 8, 16

Subject to technical modifications (2021-11-08)


Page 1 of 2 www.ids-imaging.com
IDS Imaging Development Systems GmbH
Dimbacher Str. 10 · 74182 Obersulm · Germany · Phone +49 7134 96196-0 · E-mail [email protected]
UI-3280CP-M-GL Rev.2 (AB00850)

Model
Pixel clock range 80 MHz - 197 MHz
Frame rate freerun mode 36
Frame rate trigger (continuous) 36
Frame rate trigger (maximum) 36
Exposure time (minimum - maximum) 0.027 ms - 999 ms
Long exposure (maximum) 30000 ms
Power consumption 1.6 W - 3.1 W
Image memory 128 MB
Special features IDS line scan mode,
Overlap trigger,
Sensor source gain

Ambient conditions
The temperature values given below refer to the outer device temperature of the camera housing.
Device temperature during operation 0 °C - 55 °C / 32 °F - 131 °F
Device temperature during storage -20 °C - 60 °C / -4 °F - 140 °F
Humidity (relative, non-condensing) 20 % - 80 %

Connectors
Interface connector USB 3.0 micro-B, screwable
I/O connector 8-pin Hirose connector (HR25-7TR-8PA(73))
Power supply USB cable

Pin assignment I/O connector


1 Ground (GND)
2 Flash output with optocoupler (-)
3 General Purpose I/O (GPIO) 1
4 Trigger input with optocoupler (-)
5 Flash output with optocoupler (+)
6 General Purpose I/O (GPIO) 2
7 Trigger input with optocoupler (+)
8 Output supply voltage, 5 V (100 mA)

Camera rear view


Design
Lens Mount C-Mount
IP code IP30
Dimensions H/W/L 29.0 mm x 29.0 mm x 29.0 mm
Mass 50 g

Subject to technical modifications (2021-11-08)


Page 2 of 2 www.ids-imaging.com
IDS Imaging Development Systems GmbH
Dimbacher Str. 10 · 74182 Obersulm · Germany · Phone +49 7134 96196-0 · E-mail [email protected]

You might also like