Module III: (Part I)

+ GUIDELINES FOR B.Tech Seminar Report

a) The final exam will have Presentation followed by Viva-Voice.

b) Three hard bound copies of B.Tech Seminar duly certified by the Guide (supervisor) and
forwarded by Head of the Deptt.
c) Title of Seminar, name of the student and supervisor, year of submission must be printed
on the cover page of the B.Tech Seminar. The report must be spiral using White color
paper.
f) The main contents in the B.Tech Seminar should be typed in Times New Roman 12 font
and page no. should be numbered from Abstract as 1, 2, 3……… Spacing between
consecutive lines should be 1.5. Separate successive paragraphs by 9 points. Margins of
each page should be preferably 1.25 inch left side, 0.75 inch right hand side, one inch top
and 1.5 inch bottom with page no. at bottom margin of one inch. For each chapter at top
right corner chapter no. should be written: for example; for chapter 1, it should be
Chapter - 1 (Font 12, Times New Roman). Title of the chapter should be typed in Font 16
(All Capital) and should be centred.
STYLE AND FONT SIZES
Chapter Title........................................... Bold.................................................................... 16pt
Main section heading.............................. Bold.................................................... ................14pt
Sub section heading................................ Bold.....................................................................12pt
Sub sub section heading...........................Bold and italics ..................................................12pt
Figures and table titles..............................Normal................................................................10pt
Chapter contents ......................................Bold + italics ......................................................14pt
In between text (for emphasizing)............Normal + italics..................................12pt
All other text.........................................................Normal .....................................................12pt
Literature references will be arranged in the order in which they are referred. Reference no.
will be put in square brackets within the text in the order in which they are cited.
Preferably, the Report should be organized as under:
i) Contents (Pg no. should be numbered in Roman as i, ii, iii distinct to that of starting
from Abstract).
ii) Abstract
iii) Introduction (Chapter - 1, Essential, Detailing Scope of work with Objectives)
iv) Literature survey (Chapter - 2, Essential)
v) Chapters describing the Work (Tables should be given the number based on their
chapters; for example; for chapter 2 they should be Table 2.1, 2.2 and so on. They
should be written as per IEEE Syntax as under:

TABLE 1.1
NO. OF LINES, RELAYS, VARIABLES AND CONSTRAINTS
FOR SOME POWER SYSTEMS

Like Tables, Figures should be numbered, and should be titled as under”

Fig. 2.2. Diagram showing near-end and far-end faults for relay
 vi) Conclusions (Future Scope should be mentioned at the end of this chapter)

vii) Literature References (IEEE Syntax), Examples are given as under:

“To refer a research paper” - J. U. Duncombe, "Infrared navigation - Part I: An

assessment of feasibility," IEEE Transactions on Electron Devices, vol. ED-11, pp. 34-39,
Jan. 1959.
“To refer a book” - J. K. Author, “Title of chapter in the book,” in Title of His Published Book,
xth ed. City of Publisher, Country if not USA: Abbrev. of Publisher, year, ch. x, sec. x, pp. xxx–
xxx.

viii) Appendix
ix) Index

g) The covering page and Candidate’s declaration must be as per pg. (3) and (4) respectively,
and the details as mentioned in Page nos. (5) to (9) enclosed herewith must be filled-up
and be submitted to the University besides all above. The dotted blank entries in covering
page and Candidate’s declaration {pg. (3) and (4)} must be filled-up, and later
instructions described in the dotted lines in the subscripted form for filling-up must be
removed.
 (Topic of Seminar)
A
Seminar Report
submitted
in partial fulfilment
for the award of the Degree of
Bachelor of Technology
in Department of Mechanical Engineering

Supervisor Submitted By:

Name of supervisor Name of Candidate
Designation Enrolment No.: .....

Department of Mechanical Engineering

Swami Keshvanand Institute of Technology, Management & Gramothan, Jaipur

Rajasthan Technical University, Kota

Month and Year

 Candidate’s Declaration
I hereby declare that the work, which is being presented in the Seminar, titled
“...........................(Title)...................................................”in partial fulfilment for the award of
Degree of “Bachelor of Technology” in Department of Mechanical Engineering, and submitted
to the Department of Mechanical Engineering, Swami Keshvanand Institute of Technology,
Management & Gramothan, Jaipur is a record of my own investigations carried under the
Guidance of Shri/ Dr. ..............................., Department of ...........(Name of Deptt.)..........
Engineering, ...........(Name of College)........... .

I have not submitted the matter presented in this report anywhere for the award of any other
Degree.
(Name and Signature of Candidate)

...........(Name of Specialization)..........,
Enrolment No.: ............

...............(Name of College)..............,

Counter Signed by
Name(s) of Supervisor(s)
.....................................
.....................................
 Swami Keshvanand Institute
of Technology, Management & Gramothan, Jaipur
Department of Mechanical Engineering

CERTIFICATE

This is to certify that <student name> University Roll No. of VII Semester, B.Tech
(Mechanical Engineering ) 2021-22, has presented a seminar titled “title name” in partial
fulfilment for the award of the degree of Bachelor of Technology under Rajasthan Technical
University, Kota.

Date:

<Name> <NAME>
Seminar Faculty(s) Supervisor
 ACKNOWLEDGMENET

I take this opportunity to express my gratitude to <supervisor name> who has given
guidance and a light to me during this Seminar. His versatile knowledge about “title name”
has eased me in the critical times during the span of this Seminar.
I am very grateful to our course faculties -----Name and Designation of
Faculty(s)-----, who analyzed my presentation and suggest me to improve in my grey areas of
my presentation.
I extend my sincere thanks towards Dr. Dheeraj Joshi (Head, Mechanical Engineering
Department) for his kind support throughout my span of degree. I am also thankful to Prof. S.
L. Surana (Director - Academics) and Shri Jaipal Meel (Director) for their kind support.
I acknowledge here out debt to those who contributed significantly to one or more
steps. I take full responsibility for any remaining sins of omission and commission.

Student Name
University Roll No.
B.Tech IV Year
(Mechanical Engineering)
ABSTRACT
 CONTENTS
Certificate ..................................................................................................................................i
Acknowledgement.................................................................................................................... ii
Abstract.................................................................................................................................... iii
List of Figures ….......................................................................................................................
List of Tables ….........................................................................................................................
Chapter 1: Introduction …........................................................................................................1
1.1 Heading1 …........................................................................................................................1
Chapter 2: ……………………. …..........................................................................................10
2.1 Heading1 ….......................................................................................................................13
Appendix …............................................................................................................................40
References …....................................................................................................................50
 LIST OF FIGURES

Fig. 1.1 (Name of figure) …................................................................................................................10

Fig. 1.2 (Name of figure) …................................................................................................................11

Fig. 2.1 (Name of figure) …................................................................................................................15

 LIST OF TABLES

Table 1.1 (Name of table) …................................................................................................................10

Table 2.1 (Name of table) …................................................................................................................15

Table 3.1 (Name of table) …................................................................................................................20

 Chapter 1
INTRODUCTION

Introduction about the concept, technological change presented during seminar.

This chapter also includes objectives of the topic selected along with organization of chapters.