Scribd
Upload
83 views

MSC Nursing Written Assignment Guidelines

This document provides guidelines for students on formatting and structuring written assignments. It addresses general style, type and font size, layout, word limits, referencing, citation, assignment structure including title pages, tables and figures, abbreviations, biological names, units, concentration, and appendices. Key requirements include using 12pt font, 1.5 line spacing, Harvard referencing style, and following specific guidelines for assignment length, structure, and content.

Uploaded by

JEEJA
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
83 views

MSC Nursing Written Assignment Guidelines

This document provides guidelines for students on formatting and structuring written assignments. It addresses general style, type and font size, layout, word limits, referencing, citation, assignment structure including title pages, tables and figures, abbreviations, biological names, units, concentration, and appendices. Key requirements include using 12pt font, 1.5 line spacing, Harvard referencing style, and following specific guidelines for assignment length, structure, and content.

Uploaded by

JEEJA
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

School of Health & Life Sciences

Student Guidance for the Presentation


of Assessed Written Work
This document provides you with guidelines on the style and format of written work you will
produce over the course of your study. This guidance is based on best practice and inclusive
principles for written material and has been devised to help you appreciate the expectations of
your Course Team. Please use the following guidance when presenting your academic work.

General Style
All written assignments should be in clear and concise English. Academic writing is usually written
in the third person, avoiding ‘I’ or ‘you’, and passive, not active, voice (i.e. the patient’s
temperature was initially measured at 37°C not I measured the patient’s temperature at 37°C).
The one exception is when you have been asked to write a piece of reflective writing, which is
much more personal, so will involve you talking about your own feelings and experiences. Advice
on academic writing is available from the Subject LibGuides
(http://libguides.tees.ac.uk/learning_hub)

Type and Font Size for Written Assignments


• Produce documents in clear print (minimum font size 12 pt).
• Use a linear sans serif font (e.g. Arial, Verdana and Tahoma) as these are easier to read.
This document is in ‘Arial – font size 12’.
• Using normal weight text and bold for emphasis will improve legibility.

Layout
• Use 1.5 (one and a half) or 2.0 double spacing between lines.
• Margin sizes should be the default ones used in Microsoft Word (usually 2.54 cm left and
right, 2.54 cm top and bottom).
• Left align text as justifying the text can make it difficult to read due to the straight right-hand
margin and uneven spaces between words).
• A clear gap should be left between paragraphs to make it clear where they start and end,
e.g. extra line space.
• Do not indent the start of paragraphs.
• Each page should be numbered in the bottom right-hand corner. Ideally page numbers
should be formatted as, for example, ‘Page 1 of 10’.
Word Limit
Within the assignment criteria, you will normally be informed of the maximum number of words
available for the piece of work e.g. a 3,000-word essay means no more than 3,000 words in length
(a 3,000 word limit).

The word count does not include the following:


• Title page.
• Contents page (if required).
• Text included within a Table or Figure.
• Text included within Table or Figure titles and legends.
• References.
• Appendices.

Therefore, the word count begins from the start of the introduction and finishes at the end of the
conclusion of the written work. In-text citation, other than that associated with table and figure
legends, are included in the word count.

Please be mindful of the word limit. Word limits are set for a reason and part of the assessed task
is for you to complete the written work within the available words. You are expected to have
selected the material you think is most relevant to the set task. Your tutors do not want you to
write everything you have read on the topic. They want to see how you have prioritised material
for inclusion and synthesised the information from multiple sources.

If you submit a piece of work below the word limit you may be penalising yourself as the work may
not contain the academic breadth and depth to your argument/answer. However, where you have
addressed the identified assessment criteria (with appropriate academic breadth and depth)
through writing in a focused and concise way the work will not be penalised for being under the
word count.

In some types of written assignment, such as portfolios or coding projects, it may not be possible
to provide you with a word limit. In these instances, you will be provided with alternative guidance,
such as the number of pages, to make you aware of what is expected from you.

Referencing and In-Text Citation


All your written assignments should be supported by references and you should indicate within an
assignment the sources of the information you have included by in-text citation. References and
the in-text citations should be formatted in accordance with the Harvard System as described by
‘Cite them Right’ (http://www.citethemrightonline.com/). All references must have an in-text
citation.

The end reference list starts on a new page.


Written Assignment Structure
Written assignments will typically have a specific structure and consist of a number of defined
sections which vary depending on the assignment type. Guidance on the structure and specific
sections to be included in differing assignment types will be found in Module Handbooks.

Title Page
Written assignments, irrespective of type, should include a Title Page. This should carry the
following information:
• Name of your course (and pathway if applicable).
• Your name, preferably in a slightly larger font size and bold.
• Your student number.
• Module title (exactly as identified in your module guide or specification).
• Module code (exactly as identified in your module guide or specification).
• Module leader.
• The assignment title.
• The date of submission.
• The word count of your essay (this is the actual number of words used within the word
limit).

Tables and Figures


In some written work you will be able to use tables and figures. Figures include graphs and
images such as diagrams, schematics, flow charts and photographs. Tables and figures should
be referred to in the text prior to their inclusion. Tables should be referred to in the text as Table
1. Figures should be referred to in the text as Figure 1 and multipart figures should be labelled
(a), (b), etc. Tables and figures should appear as close to their introduction as possible but should
not be broken across pages. Table titles and legends should precede the table. The figure title
and legend should be placed below the figure. Tables and figures should be broadly
comprehensible without reference to the text. Ideally, when you are presenting information
derived from other sources, your tables and figures should be self-generated and should not be
exact reproductions of those which have already been published in the literature. You should
attempt to compile tables and figures which draw on information present in multiple sources. In
these circumstances, you should include in-text citations as part of the legend to indicate the
sources of this information.

Abbreviations
The use of abbreviations is common in academic writing, especially for long technical terms and it
can be a way to make your writing flow more smoothly. You should not, however, assume that
even well used abbreviations are standard and have only one meaning, as terminology changes
over time. Always give the term in full at the first use and show the abbreviation in brackets. For
example, the Health and Care Professions Council (HCPC) regulate health, social work and
psychological professions. Once a term has been abbreviated, use the abbreviated form
consistently from then on. For example, always use HCPC and not hcpc or Hcpc. Try to use
accepted abbreviations, such as HCPC rather than making up your own. Please note,
abbreviations of SI Units do not, at the first mention, need to be preceded by the term in full.

Only use abbreviations where you are using the term frequently throughout the text as the reader
may find it hard to remember abbreviated terms that are used fewer than three times after their
first use. Take care not to litter the work with numerous unfamiliar abbreviations. When you are
considering whether to use an abbreviation, remember that abbreviations should make it easier for
your users to read your work. If numerous abbreviations or acronyms cannot be avoided, provide
a glossary of the abbreviations used that the reader can refer to.

Biological Species Names


The scientific name of a biological species is normally comprised of two words and is, therefore,
called a binomial term. The allocation of a species name is normally done on the basis of the
organism's taxonomic classification with the name of the genus followed by a second term which
identifies the species. When you are writing taxonomic names, always italicise the generic and
species names (e.g. Escherichia coli). Within a written report the first usage of a species name
should give the full species name (e.g. Homo sapiens). Subsequently, the species name can be
shortened by abbreviating the genus name to a single letter (e.g. H. sapiens).

The naming and classification of viruses is less advanced than for cellular organisms. The names
of viruses do not use the binomial system (there is no genus or species component to the name)
and, hence, the names are not italicised (e.g. Human Immunodeficiency Virus, ΦX174).

Units and Compound Units


For measurements, you should use the International System of Units (IS Units). When expressing
a value and the unit of measurement you should normally use a space between number and unit,
e.g. 5·4 kb not 5·4kb; 10 000 g not 10 000g. There are a number of notable exceptions i.e. 37°C
not 37 °C; a right angle is 90° not 90 °; 75% not 75 %. When you are using a compound unit for
measurement, use μg mL-1 not μg/mL; 10 μg ampicillin mL-1 not 10 μg mL-1 ampicillin. The use of
a space between units allows the compound unit m s-1, a measure of speed, and ms-1, a unit of
frequency, to be distinguished.

Concentration
Concentrations should be given in g L-1, etc., or molarity, M, not normality, N. The term '%' should
be defined as 'w/v', 'v/v' or 'w/w' if this is necessary to avoid ambiguity.

Appendices
You may be asked to include Appendices as part of a written assignment, these should be clearly
numbered and referred to in the text as Appendix 1, 2. etc. You should not include information
that is essential to the assignment in an appendix. Module Leaders will advise you if appendices
are expected as part of an assignment. Appendices should start on a new page and come after
the References section.

You might also like