Scribd
Upload
22 views

Interference

The document discusses interference of light waves. It explains that interference is caused by the superposition of waves when two coherent light sources interact. Constructive interference occurs when wave amplitudes add, producing bright fringes. Destructive interference happens when amplitudes cancel out, creating dark fringes. Interference effects obey the principle of conservation of energy and the conditions of equal frequency, constant phase difference, and plane of polarization between light sources. Interference phenomena like Newton's rings and anti-reflection coatings are also described.

Uploaded by

kalyanitandasi9
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
22 views

Interference

The document discusses interference of light waves. It explains that interference is caused by the superposition of waves when two coherent light sources interact. Constructive interference occurs when wave amplitudes add, producing bright fringes. Destructive interference happens when amplitudes cancel out, creating dark fringes. Interference effects obey the principle of conservation of energy and the conditions of equal frequency, constant phase difference, and plane of polarization between light sources. Interference phenomena like Newton's rings and anti-reflection coatings are also described.

Uploaded by

kalyanitandasi9
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 18

INTERFERENCE

Thomas Young 1801


Interference and diffraction phenomena can be explained by
Huygens wave theory.

Interference is an important consequence of superposition of


waves.
Principle of superposition theorem:
This principle states that the resultant displacement of a particle of
the medium acted upon by two or more coherent waves (equal
frequency and constant phase difference) simultaneously is the
algebraic sum of the displacements of the same particle due to
individual waves, in the absence of the others.
Interference: When two light waves superimpose, then
the resultant amplitude or intensity in the region of
superposition is different than that of the amplitude or
intensity of individual waves.

This modification of intensity in


the region of superposition is
called interference.

Alternate bright and dark


fringes are found in the
interference region.
Constructive Interference
When the resultant amplitude is the sum of
the amplitudes due to two waves, the
interference is called constructive
interference which produce bright fringe

Destructive interference
when the resultant amplitude is equal to the
difference of two amplitudes, the
interference is known as destructive
interference that gives dark fringe.
Interference phenomena obey the law of
conservation of energy.
Conditions for sustained interference
1. The waves from the two light sources must be of the same
frequency, narrow and maintain the constant phase
difference.
2. The amplitude of two waves should be equal to observe the
distinct bright and dark fringes.
3. The two coherent sources must lie close to each other in
order to produce interference effect.
4. Back ground should be dark to view interference fringes.
5. Plane of polarization must be the same.

Stokes principle: According to Stoke’s principle, when a light


wave is reflected at the surface of an optically denser medium,
it suffers a phase difference of π, or a path difference of λ/2.

It should be remembered that no such phase difference is


introduced if the reflection takes place from the surface of
rarer medium.
Interference in Thin films due to reflected rays
•  = path (BC+CD) in film – path BE in air
• = μ (BC+CD)-BE ---- (1) (since for air μ = 1)
• We know that Snell’s law μ = sin i/sin r
• = (BExBD)/(FDxBD) = BE/FD
• BE = μFD --- (2)
• Substitute (2) in (1)
•  = μ(BC+CD)-μ (FD)
• = μ(BC+CF+FD) )-μ (FD) = μ(BC+CF)
• = μ(PF) ----- (3)
• From the triangle BPF, cos r = PF/BP,
• PF = BP cos r = 2t cos r ---- (4)
• From equations (3) and (4), we get  = 2μtcos r ---- (5)
• According to Stokes principle
•  = 2μtcos r  λ/2
– Condition for bright fringe: 2μtcos r = (2n1) λ/2
– Condition for dark fringe: 2μtcos r = nλ
Newton’s Rings
• The path difference between these rays 1
and 2 is 2μtcos r  λ/2
• Since r = 0 (i = 0), μ = 1,  = 2t  λ/2
• At the point of contact t = 0, the path
difference is only λ/2. Hence the central
spot is dark.
• The condition for bright fringe is 2t =
(2n1) λ/2 where n = 1,2,3,…..
• and the condition for dark fringe is 2t = n λ
From the property of the circle
NP x NQ = NO x ND
rn x rn = t (2R-t) = 2Rt – t2  2Rt
rn2 = 2Rt
t = rn2/2R
Thus for a bright fringe rn2 = (2n1) λR/2
Dn2 = 2 λR (2n-1)
For dark fringe Dn2 = 4n λR
Square root of natural numbers

Transmitted light: conditions are reversed

By measuring the diameter of the Newton’s


rings, it is possible to calculate the wavelength
of light.

The diameter of the nth dark fringe Dn2 = 4n λR


The diameter of the mth dark fringe Dm2 = 4m λR

Dm2 - Dn2= 4(m-n)λR


λ = (Dm2 - Dn2) /4(m-n)R
D’m2 – D’n2

D’m2 – D’n2
Applications of Interference

Testing of flatness
of a surface
Anti-reflection Coatings
Optical instruments such as telescope and cameras use
multicomponent glass lenses. When light is incident on the lens,
part of the incident light is reflected away and that much amount
of light is lost and wasted. When more surfaces are there, the
number of reflections will be large and the quality of the image
produced by a device will be poor.

It is found that coating the surface with a thin transparent film of


suitable refractive index can reduce such loss of energy due to
reflections at surface. Such coatings are called antireflection
coatings. “Antireflection coatings are thin transparent coatings of
optical thickness of one quarter wavelength given on a surface in
order to suppress reflections from the surface”.
Alexander Smakula discovered in 1935 that the reflections
from a surface can be reduced by coating the surface with a thin
transparent dielectric film.
A thin film can act as an antireflection coating if it meets the following two
conditions:
(i) Phase condition: The waves reflected from the top and bottom
surfaces of the thin film are in opposite phase such that their overlapping leads to
destructive interference, and
(ii) Amplitude condition: The waves have equal amplitudes

The above conditions enable us determine the required thickness of the films and
refractive index of the material.

You might also like