Scribd
Upload
74 views

What Is A DOP

DOP/PAO testing checks the integrity of HEPA filters using oil or poly alpha olefin solutions that generate smoke particles larger than 0.03 microns. The test certifies the filter is functioning properly with no leaks or damage. DOP is an oil used for testing but PAO, a non-carcinogenic liquid, is often used instead. HEPA filters containing fiberglass remove at least 99.97% of particles over 0.3 micrometers and should be tested every four weeks or when equipment is moved to ensure the filter seals remain tight.

Uploaded by

muhammad saqib Ilyas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
74 views

What Is A DOP

DOP/PAO testing checks the integrity of HEPA filters using oil or poly alpha olefin solutions that generate smoke particles larger than 0.03 microns. The test certifies the filter is functioning properly with no leaks or damage. DOP is an oil used for testing but PAO, a non-carcinogenic liquid, is often used instead. HEPA filters containing fiberglass remove at least 99.97% of particles over 0.3 micrometers and should be tested every four weeks or when equipment is moved to ensure the filter seals remain tight.

Uploaded by

muhammad saqib Ilyas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

What is a DOP/PAO Test?

DOP/PAO testing is a very quick process that tests the integrity of the HEPA (High Efficiency Particulate Air) filter using DOP
or PAO solutions in their operational conditions.
These solutions generate a gas type smoke and then generate gas particles that will be greater than .03 microns. The test will
certify the HEPA filter is fully functioning and there is no leakage or damage.

Meaning of DOP?
DOP (Dispersed Oil Particulate) is a dispersed aerosol used to test the integrity of HEPA filters.

Meaning of PAO?
PAO (Poly Alpha Olefin) is a non-carcinogen liquid which is a most common replacement for DOP.

When to do DOP test


Any equipment that has a HEPA filter should be tested every time the equipment
is moved or going to be used on a new project (every four weeks if on same
project). For the best results testing should be done on-site to ensure that the units
have not been damaged due to transportation or daily activities at the work site.

Also rough handling of the equipment can cause the filter seals to become loose
from around the HEPA filter therefore causing leakage and making them unsafe
for workers who are counting on them while working in hazardous conditions.
What is a HEPA Filter?
HEPA filters are composed of usually fiberglass fibers randomly arranged. To
qualify as HEPA the air filter must remove at least 99.97% of all airborne
particles greater than 0.3 micrometers in diameter from the air that passes through
it.

You might also like