Upgrading Cimplicity 6.1 To 8.1 License Issue
Upgrading Cimplicity 6.1 To 8.1 License Issue
We are upgrading a Cimplicity 6.1 project to 8.1. We have a licensed 8.1 version on a new server and when we copied the 6.1 project
into the 8.1 version it asked if we wanted to convert it 8.1. Yes, we did the conversion, However, when the project started, we only had
a 2-hour license. Is the 8.1 version only good for a "new" project? or what is the protocol for this type of upgrade/conversion?
Thanks,
Charlie
CIMPLICITY
(/S/Topic/0TO8a000000AXNjGAO/)
4 answers
The License information is from the new server, When the Cimplicity project was copied to the new server, upgraded and
started, this is the error. I did not move or transfer the running (6.1) project license to the new server as we need to test our
device communications. We shut one project down and start the other for testing. I'm not sure if the 6.1 license has to be
moved to the new server?
Thanks - Charlie
Expand Post
Upvote Reply
Open the project in the new version and confirm for the conversion to the newer Cimplicity version should be right.
When you start the project, do you get the message that cimplicity does not have a valid base license? if so, the problem is
probably that there is something wrong with the license
Expand Post
Upvote Reply
Write an answer...
Trending Articles
Proficy Security Advisory GEIP12-01
(/s/article/Proficy-Security-Advisory-GEIP12-01)
Contact Support
© 2022
GE.com/Digital Privacy Terms Cookies
General
(https://www.ge.com/digital/) (https://www.ge.com/privacy) (https://www.ge.com/terms) (https://www.ge.com/privacy)
Electric