Scribd
Upload
86 views

Geotextile With Design Characteristics

The document provides specifications for various geotextile materials including Geodren A7-300 g/m2, Geodren A4-150 g/m2, and Geodren A50P-500 g/m2. It lists properties such as weight, thickness, puncture resistance, tensile strength, elongation percentages, permeability, and fire resistance. The specifications ensure the geotextiles can effectively function as drainage filters, separation layers, and for subgrade protection in various applications.

Uploaded by

yameg
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
86 views

Geotextile With Design Characteristics

The document provides specifications for various geotextile materials including Geodren A7-300 g/m2, Geodren A4-150 g/m2, and Geodren A50P-500 g/m2. It lists properties such as weight, thickness, puncture resistance, tensile strength, elongation percentages, permeability, and fire resistance. The specifications ensure the geotextiles can effectively function as drainage filters, separation layers, and for subgrade protection in various applications.

Uploaded by

yameg
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 4

2.4.

3
2.7.8 Geodren A4-150 2.7.3
Geotextile Characteristics Separation g/m²
Subgrade Geodren A7-300 g/m²
Drainage Filter
Protection
200 g/m² , -/+ 5 % ≥ 300 g/m²
* Weight per unit area (EN 29073-1)
150 g/m²
(EN 965)
300 g/m² 300 g/m²

> 3 mm > 1 mm
* Minimum thickness (EN 29073-2)
0,80 mm …
(EN 29073-2)
> 2 kN, -/+ 10 %
1.7 kN ≥ 1900 N 3,50 kN > 2 kN, -/+ 10 %
* CBR puncture resistance (EN ISO 12 236)
[EN ISO 12236] (ISO/EN 12236) (EN ISO 12 236) (EN ISO 12 236)
* Plain tensile strength. Minimum
> 16 kN/m, -/+ 10 % 12,0 kN/m ≥ 12 Kn 25,0 kN/m > 12 kN/m, -/+ 10 %
strength to any of both directions (EN ISO 12 219) [EN ISO 10319] (ISO/EN 10319) [EN ISO 10319] (EN ISO 12 219)

> 50 % MD 45% 40-70% 55 %


*Elongation at break (EN ISO 12 219) [EN ISO 10319] (ISO/EN 10319) [EN ISO 10319]
> 50 %

MD 45%
> 60 %
* Elongation at perforation (EN ISO 12 236)
CMD 60% … …
[EN ISO 10319]

* Perforation force … … …
Pyramidal puncture
≥ 1000 N
* Grab tensile strength ….
(ASTM D 4632)
resistence 500 N …
[EN 14574]
≤ 25 mm 14,00 mm < 25mm, -/+ 15 %
* Cone drop test/hole-Φ) …
(EN 918) [EN ISO 13433] (EN ISO 13 433)
Pyramidal puncture
≥ 450 N
* Trapezoidal tear strength …
(ASTM D 4533)
resistance 500 N …
[EN 14574]

* Permeability ≥ 3 x 10 ¯⁴ m/s
> 10¯¹ cm/sec,
0.0003 = 0.3mm Velocity index
Under pressure of 20 kN/m2 Under pressure 2 65 mm/s > 90 l/(m² sec), -/+ 30 %
[EN ISO 11058] ≥ 2.5 x 10 ¯⁴m/s 30 mm/s
(EN ISO 11058)
Under pressure of 200 kN/m2 kPa
(SN 640550) [EN ISO 11058]
(EN 29073-2)

* Permittivity ≥ 0.6 s¯¹


≥ 0.5 s¯¹
Under pressure of 20 kN/m2 …
(SN 640550)
Missing …
Under pressure of 200 kN/m2
* Effective opening size of geotextile O ≤ 120 µm 60 μm > 100μm, -/+ 30 %
90 … (DIN 60500/6) [EN ISO 12956] (EN ISO 12 956)
Fire resistance Non flammable Non flammable
2.10.10.8 Geodren A50P-500
Geodren A7-300 g/m²
Tunnel g/m²

500 g/m², -/+ 5 % 500 g/m²


300 g/m²
(EN 29073-1) [EN ISO 9864]
3,50 mm
> 3 mm
1,60 mm EN ISO 9863-1]
(EN 29073-2)

3,50 kN
… …
(EN ISO 12 236)
MD 35,0 kN/m
25,0 kN/m > 16 kN/m (E
CMD 40,0 kN/m
[EN ISO 10319] N ISO 12 219)
[EN ISO 10319]
> 50 %
55 % MD 60 %
(EN ISO 12 219)
[EN ISO 10319] [EN ISO 10319]

> 50 % CMD 70 %
(EN ISO 12 236) [EN ISO 10319]
> 14kN 5,80 kN
(EN ISO 12 236) [EN ISO 12236]

… …

14,00 mm
… …
[EN ISO 13433]

… …

Velocity index
30 mm/s … …
[EN ISO 11058]

… …
60 μm
…
[EN ISO 12956] …
Non flammable Non flammable

You might also like