MCQ’s on Unit No.

Q1. The Color Coding is used to indicate ________ value/rating of Resistor.

a. Numerical
b. Alphabetical
c. Resistance
d. a & c are correct
Answer: a

Q2. The Resistor Color Code was developed by _______________________.

a. International Organization for Standardization (ISO)
b. Electronics Industries Alliance (EIA)
c. Radio Manufacturers Association (RMA)
d. a & b are correct
Answer: c

Q3. Recently, ______________standard Color Coding is used for Resistor’s values.

a. World Standardized Corporation (WSC)
b. Electronics Industries Alliance (EIA)
c. Radio Manufacturers Association (RMA)
d. International Organization for Standardization (ISO)
Answer: b

Q4. The color code standard was developed in ____________________.

a. 1890
b. 1920
c. 1940
d. 1900
Answer: b

Q5. RCC stands for ____________________.

Answer: Resistors Colour Code

Q6. Why is Color Coding used for Resistors ?

a. Small Size
b. Cylindrical Shape
c. Due to Through Hole Component
d. a & b are correct
Answer: d

Q7. How many colour bands used on Resistors __________________

a. 4
b. 5
 c. 6
d. 7
Answer: c

Q8 How to read color bands on Resistors ?

a. Right to Left
b. Left to Right
c. From both sides
d. All are correct
Answer: b

Q9 The first two bands on the resistors are _____________________

a. Two digits
b. Decimal Multiplier
c. Tolerance
d. All are incorrect
Answer: a

Q10 The tolerance of the Silver band on Resistor is _____________________

a. 3%
b. 5%
c. 10%
d. 20%
Answer: c

Q11 The gold band tolerance on Resistor is _____________________

a. 3%
b. 5%
c. 10%
d. 20%
Answer: b

Q12 If there is no band on Resistor then tolerance is _____________________

a. 3%
b. 5%
c. 10%
d. 20%
Answer: d

Q13 Which digit is represented by a Green band on a Resistor?

a. 4
b. 5
c. 6
 d. 3
Answer: b

Q14 The decimal multiplier means, how many ________ add after the first digits.
a. Zeros
b. Digits
c. Tolerance
d. Resistance
Answer: a

Q15 What color is a 340 KΩ resistor with 5% tolerance?

a. Orange, Yellow and Yellow with Gold
b. Orange, Green and Yellow with Gold
c. Orange, Blue and Orange with Gold
d. Orange, Yellow and Green with Gold
Answer: a

Q16 A zero-ohm resistor is indicated by a single black color ring around the body of
the
resistor.
YES / NO
Answer: Yes

Q17 Why zero ohm resistors are used?

a. Connect the Tracks
b. As Jumpers
c. Increase Machine Production Time
d. All are correct
Answer: d

Q18. The _____________ of a resistor is determined mainly by its physical size.

a. Resistance
b. Power
c. Current
d. a & b are correct
Answer: b

Q19. Resistor is an _________________ component/device.

a. Active
b. Passive
Answer: b

Q20. There are two main characteristics of a resistor are _______________________.

 a. Current and Voltage
b. Current and Power
c. Resistance and Power
d. Resistance and Current
Answer: c

Q21. Resistors are generally available in the maximum value of ______________ohm.

a. Mega (M Ω)
b. Gega (G Ω)
c. Kilo (K Ω)
d. Tera (T Ω)
Answer: a

Q22. Does Resistor dissipate power? YES / NO

Answer: YES

Q23. The power rating of a resistor should be ____________ than from actual power
dissipation (Waste) as heat for the reason of Safety factor (Burning).
a. Less
b. More
Answer: b

Q24. What is the Power Dissipation formulae?

a. P = V×I
b. P = V^2 / R
c. P = I^2 × R
d. All are correct
Answer: d

Q25. Most common type of Resistor is _________________________

a. Wire Wound Resistor
b. Carbon Resistor
c. Film Type Resistor
d. Fusible Resistor
Answer: b

Q25. Resistors are ________________ devices.

a. Polarity Devices
b. Non-Polarity
Answer: b

Q26. What happens with the requirement of Power rating when the resistance
increases ?
 a. Lower Power Rating
b. Higher Power Rating
Answer: a

Q27. Power Rating is ___________________ proportional to the Resistance ® of a Resistor

a. Directly
b. In-Directly
Answer: b

Q28. Power Rating and Physical Size of Resistor is ______________________ proportional.

a. Directly
b. In-Directly
Answer: a

Q29. Wire Wound Resistors are usually used (Applications) for _________________________.
a. High Current
b. Low Resistance
c. Desired (Appreciable) Power
d. All are Correct
Answer: d

Q30. Wire Wound Resistor is only used for _________________________.

a. Low Frequency
b. High Frequency
Answer: a

Q31. At High Frequency, Wire Wound Resistor Acts As _________________________.

a. Capacitor
b. Inductor
c. Diode
d. a & b are correct
Answer: b

Q32. How the Carbon Composition Resistors are made (Construction) by ____________.
Answer: Carbon/Graphite Powder with Insulating Material (Ceramic / Resin) to
bond the Mixer

Q33. Types of Capacitors are generally depends on _______________.

a. Conductor Plates
b. Size
c. Dielectric
d. All are correct
Answer: c
Q34. Air is used as dielectric in __________ Capacitor.
a. Mica
b. Paper
c. Air
d. Ceramic
Answer: c
Q35. Molecular thin Oxide film used as a dielectric in _____________ Capacitor.
a. Mica
b. Electrolytic
c. Ceramic
d. Chip
Answer: b

Q36. Ceramic is used as dielectric in _________ Capacitor.

a. Plastic
b. Electrolytic
c. Chip
d. Mica
Answer: c

Q37. Mica Capacitor are often used for Small Capacitance values from________________.
a. 0 to 50pF
b. 10 to 5000pF
c. 50 to 100pF
d. 10pF to 50nF
Answer: b

Q38. Paper Capacitors are often used for Medium Capacitance value from
___________________.
a. 1 to 100μF
b. 0 to 5000μF
c. 0.001 to 1.0μF
d. 0.01 to 10.0μF
Answer: c

Q39. There are two types of film capacitors ___________

a. Foil & Metalized Type
b. Chip & Ceramic Type
c. Metalized & Ceramic Type
d. b & c are correct
Answer: a
Q40. Film capacitors are frequently used in _________________
a. Circuits required Stable Capacitance
b. Radio Frequency Oscillator
c. Timer Circuits
d. All are correct
Answer: d

Q41. Film capacitors are available with the values from ___________________.
a. 0.001 to 1.0μF
b. 0 to 100pF
c. 100pF to 100μF
d. 100pF to 5000pF
Answer: c

Q42. Ceramic capacitors are available with the values from ___________________.
a. 10pF to 100μF
b. 1pF to 1μF
c. 0.001 to 1.0μF
d. 1μF to 100μF
Answer: b

Q43. Chip Capacitors are often called_______________

a. Mica Capacitor
b. Paper Capacitor
c. Surface Mount Capacitor
d. Electrolytic Capacitor
Answer: c

Q44. Common size of chip (SMD) capacitor is _________________

a. 0.125 inches (Long) → 0.063 inches (Wide)
b. 0.75 inches (Long) → 0.85 inches (Wide)
c. 0.080 inches (Long) → 0.050 inches (Wide)
d. a & c are correct
Answer: a

Q45. Chip Capacitors are available in the values of _______________.

a. pF → μF
b. pF → nF
c. nF → pF
d. nF → μF
Answer: a

Q46. The movable plate of variable capacitor is called _______________

 a. Stator
b. Rotor
c. Arm
d. Motor
Answer: b

Q47. ______________ Capacitors can varies the capacitance by changing the distance of
conductor plates.
a. Fixed
b. Variable
c. Chip
d. All are correct
Answer: b

Q48. ______________ Capacitors are used for temperature coefficient.

a. Air
b. Mica
c. Ceramic
d. Electrolytic
Answer: c

Q49. The tolerance of ceramic capacitor is _________________.

a. ±10%
b. ±40%
c. ±20%
d. ±5%
Answer: c

Q50. The tolerance of paper capacitor is _________________.

a. ±10%
b. ±5%
c. ±20%
d. ±40%
Answer: a

Q51. The tolerance of ____________ capacitor is ±2% to 20%.

a. Air
b. Mica
c. Film Type
d. b & c are correct
Answer: d

Q52. What are the applications of capacitors ____________ of AC signal.

 a. Coupling/Decoupling
b. Filtering
c. By Passing
d. All are correct
Answer: d

Q53. Electrolytic Capacitors value ranges from _______________.

a. 1 to 7600μF
b. 1 to 6800μF
c. 1 to 9000μF
d. 100 to 1000pF
Answer: b

Q54. _____________ capacitors must be connected in proper polarity.

a. Mica
b. Air
c. Electrolytic
d. Chip
Answer: c

Q55. __________ capacitors may explode when connected in opposite polarity.

a. Mica
b. Electrolytic
c. Surface Mount
d. Paper
Answer: b

Q56. What are the disadvantage of using electrolytic capacitors___________

a. High Leakage Current
b. Small Leakage Current
c. Change Capacitance
d. All are correct
Answer: a

Q57. __________ capacitors are also called Bipolar Capacitors.

a. Polarized
b. Non-Polarized
c. Tantalum
d. Chip
Answer: b

Q58. __________ capacitors are also called Bipolar Capacitors.

a. Polarized
 b. Non-Polarized
c. Tantalum
d. Chip
Answer: b

Q59. __________ capacitor is the another types of Electrolytic Capacitor.

a. Tantalum
b. Chip
c. Ceramic
d. Mica
Answer: a

Q60. The features of Tantalum Capacitor is _________________________

a. Long Shelf Life
b. Large Capacitance with Small Size
c. Less Leakage Current
d. All are correct
Answer: d

Q61. When increasing the size of Resistor & Capacitor inside IC then it will
______________ the size of integrated circuit.
a) Decrease
b) Increase
c) No effect
d) The statement is incorrect
Answer: b

Q62. Due to the multiple components inside ICs, the separation between
components are minimum. True/False
Answer: True

Q63. The purpose of introducing microelectronics is to reduce size of instruments

upto ____________.
a) 5 times
b) 2 times
c) 1 time
d) 10 times
Answer: d

Q64. In the modern age, the integrated circuit is the best replacement of transistor.
True/False
Answer: True [Because the IC consists of million of individual transistors]
Q65. __________ is used to inspect the internal circuit (Components) of ICs.
a) Microscope
b) X-Ray Machine
c) Oscilloscope
d) a & b are correct
Answer: d

Q66. The alternative name of Chip IC is Wafer. True/False

Answer: True

Q67. All of those components which are not producing gain is called ____________.
a) Active
b) Passive
Answer: b

Q68. All of those components which produce gain is called ____________.

a) Active
b) Passive
Answer: a

Q69. SSI stands for _____________.

a) Supplemental Security Income
b) Small Scale Industries
c) Standard Settlement Instructions
d) Surface Scale Integration
Answer: b

Q70. The size of Integrated Circuit (IC) is ________ than any individual component of
Electronics.
a) Smaller
b) Larger
c) Equal
d) all are incorrect
Answer: a

Q71. The biggest failure of ICs is to pass / operate limited value of current.
True/False
Answer: True

Q72. In the SSI Chip, _________ number of components consists.

a) Less than 5
 b) Less than 30
c) Less than 55
d) Less than 12
Answer: d

Q73. An insulating Semiconductor area on which IC is made called ___________.

a) Substrate
b) Interpose
c) Interconnection
d) Substitute
Answer: a

Q74. The meaning of Monolithic is Mono means “One” and Lithic means “Stone”.
True/False
Answer: True

Q75. Components in the silicon chip of Integrated circuits are separated by Isolation
diffusion. True/False
Answer: True

Q76. The inputs of Linear or Analog Integrated Circuits (LIC) is ___________ to the
Outputs.
a) Directly Proportional
b) Indirectly Proportional
Answer: a

Q77. The symbol of IC is a shape of Triangle or Rectangle.

1. True/False
Answer: True

Q78. The normal size of any integrated circuit is __________________.

a) 0.2mm × 0.2mm × 0.001mm
b) 0.1mm × 0.4mm × 0.001mm
c) 0.4mm × 0.8mm × 0.01mm
d) 0.7mm × 0.9mm × 0.1mm
Answer: a

Q79. The connection inside the ICs are made by soldering process. True/False
Answer: False

Q80. ____________ components are not included in any IC.

a) Coil
b) Inductor
 c) Capacitor
d) a & b are correct
Answer: d

Q81. ICs can control the limited value of power. True/False

Answer: False

Q82. The smallest part any Silicon wafer on which IC is manufactured called
_____________.
a) Chip
b) SMD
c) THT
d) All are correct
Answer: a

Q83. Epitaxial growth is a process used to grow a thin crystalline layer on a

substrate. True/False
Answer: True

Q84. A _________ integrated circuit (IC) is a set/group of circuits manufactured in a

single piece of silicon chip.
a) Monolithic
b) Bipolar
Answer: b

Q85. _________ methods are used for the fabrication of Thin Film ICs.
a) Vacuum Evaporation
b) Cathode Sputtering
c) Infrared Suppression
d) a & b are correct
Answer: d

Q86. Carbon Composition Resistors are most popular because ______________________

a. Low Price
b. Small Size
c. High inductance
d. a & b are correct
Answer: b

Q87. The Resistance of a Carbon Composition Resistor is depends of______________.

a. Size
b. Current
c. Ratio of Powders (Carbon & Ceramic)
d. a & b are correct
Answer: c

Q88. Carbon Composition Resistors generally used for _____________________

a. Inductive Component
b. Surge Protection
c. Voltage Pulse Reduction
d. b & c are correct
Answer: d

Q89. The applications of carbon composition resistors are _______________

a. Power Supplies
b. Welding Controls
c. a & b are correct
Answer: c

Q90. Advantages of carbon composition resistor are ___________________

a. Small Size
b. Low Cost
c. Withstand at high energy pulses
d. All are Correct
Answer: d

Q91. The value of Carbon Composition Resistor could be changed by ____________

a. If not in use for a year (5%)
b. Soldering (Heat) – 3 %
c. Operate at 70°C Temperature (15%)
d. All are Correct
Answer: d

Q92. Disadvantages of carbon composition resistor are ___________________

a. Instability of Resistance Value
b. High Temperature Coefficient
c. High Noise
d. All are Correct
Answer: d

Q93. The type of Film Resistors are _________________

a. Chip Film Resistor
b. Carbon Film
c. Metal Film Resistor
d. b & c are correct
Answer: d
Q94. Advantages of Carbon Film Resistors are____________________
a. Low Noise
b. Temperature Stability
c. Precise Resistance
d. All are correct
Answer: d

Q95. The more precise value of Resistor will be ____________________

a. Carbon Film Resistor
b. Meta Film Resistor
Answer: b

Q96. Meta Film Resistors are always coated with Lacquer that protects_____________
a. Electrically
b. Mechanically
c. Climate (Temperature/Humidity)
d. All are correct
Answer: d