Scribd
Upload
498 views

How To Setup l2tp On Kali Linux

To set up L2TP on Kali Linux to connect to PureVPN, you must: 1. Install the L2TP packages by running commands in the terminal 2. Add a new VPN connection and select L2TP, entering the gateway, username, and password provided by PureVPN 3. Configure IPsec, PPP, and compression settings as detailed in the document 4. Connect to the newly created PureVPN connection to activate the VPN

Uploaded by

solar.usr
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
498 views

How To Setup l2tp On Kali Linux

To set up L2TP on Kali Linux to connect to PureVPN, you must: 1. Install the L2TP packages by running commands in the terminal 2. Add a new VPN connection and select L2TP, entering the gateway, username, and password provided by PureVPN 3. Configure IPsec, PPP, and compression settings as detailed in the document 4. Connect to the newly created PureVPN connection to activate the VPN

Uploaded by

solar.usr
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

PureVPN Support

Solution of Your Problems


https://support.purevpn.com

How to setup L2TP on Kali Linux

Follow the instructions to enable PureVPN on your Kali Linux with L2TP protocol. Here’s
how to proceed.

1 Go to the ‘Menu’ option and search and open the ‘Terminal Emulator’.

2 Now you need to install L2TP packages. Type the following commands one by one:

sudo apt-get update


sudo apt-get install network-manager-l2tp-gnome
sudo apt-get install xl2tpd

3 Now Select the following options:

Click on “Ethernet Network Connection“


Go to “VPN Connections”
Select “Add a VPN Connection…”

1/6
PureVPN Support
Solution of Your Problems
https://support.purevpn.com

4 Select ‘Layer 2 Tunneling Protocol (L2TP)’ option. Click the “Create” button.

5 When a new window appear, complete the fields as below:

Insert Connection name: PureVPN


Insert Gateway: usca.pointtoserver.com (you can use your desired server address here,
in order to see the complete list click here)
Insert Username provided by PureVPN
Insert Password provided by PureVPN

2/6
PureVPN Support
Solution of Your Problems
https://support.purevpn.com

6 Click IPsec Settings

Check ‘Enable Ipsec tunnel to IPsec host’

Pre-share key: 12345678

Then specify connection algorithms in Advanced section:

For phase 1= 3des-sha1-modp1024

For phase 2 = 3des-sha1

Click OK

3/6
PureVPN Support
Solution of Your Problems
https://support.purevpn.com

7 Go to the ‘PPP Settings…’ button

Allow the following options:

MSCHAP
MSCHAP2

Also, select the following:

Allow BSD data compression


Allow Deflate data compression
Use TCP header compression

4/6
PureVPN Support
Solution of Your Problems
https://support.purevpn.com

?lick “OK” then “Save”.

8 Now go to Ethernet Network Connections option and under VPN Connections click/check on
the newly created PureVPN connection to activate VPN.

5/6
PureVPN Support
Solution of Your Problems
https://support.purevpn.com

9 Viola! You are now connected to PureVPN.

6/6
Powered by TCPDF (www.tcpdf.org)

You might also like