Scribd
Upload
441 views

Apl Apollo Tubes Limited Unit-Iii: Works-Vill-Kudavali Plot No-M-1, Murbad, 421401, Thane (MS)

This certificate summarizes test results for steel tubes from APL Apollo Tubes Limited. Three sizes of black steel hollow sections were tested for chemical composition and mechanical properties in accordance with Indian standard IS 4923:2017. All samples met or exceeded requirements for carbon, manganese, phosphorus, sulfur, tensile strength, yield strength, and elongation. Chemical analysis and mechanical properties are provided for each size. The certificate confirms the materials conform to standard dimensions and mass tolerances.

Uploaded by

devanshbhuvansht.823
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
441 views

Apl Apollo Tubes Limited Unit-Iii: Works-Vill-Kudavali Plot No-M-1, Murbad, 421401, Thane (MS)

This certificate summarizes test results for steel tubes from APL Apollo Tubes Limited. Three sizes of black steel hollow sections were tested for chemical composition and mechanical properties in accordance with Indian standard IS 4923:2017. All samples met or exceeded requirements for carbon, manganese, phosphorus, sulfur, tensile strength, yield strength, and elongation. Chemical analysis and mechanical properties are provided for each size. The certificate confirms the materials conform to standard dimensions and mass tolerances.

Uploaded by

devanshbhuvansht.823
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Format No.

: QA-F-18
TEST CERTIFICATE FOR STEEL TUBES Rev.no. : 00
MURBAD, INDIA Date : 10.10.2017

APL APOLLO TUBES LIMITED UNIT-III


Works-Vill-Kudavali Plot No-M-1, Murbad, 421401, Thane (MS)

IS: 4923

TEST CERTIFICATE NO : IS4923/210/IS0735


DATE : 12-03-23
INVOICE NO 2005005525 CM/L-3850769
INVOICE DATE 12-03-23

M/s VIKAS ASSOCIATES PUNE


We certify that the material described below fully conformed to IS 4923 : 2017. Chemical composition and Mechanical properties of the product, as tested in
tested in accordance with the scheme of testing and inspection contained in the BIS certification marks license no. CM/L-3850769 are as indicated below
against each order no.
TEST RESULT
MECHANICAL
HEAT NO./ TOTAL Wt GALVANIZING
Size Grade/ Type Pcs. CHEMICAL ANALYSIS PROPERTIES
BATCH NO. (MT) (Min)
( % Max) (Min)
Tensile Yeild
Weight
C Mn P S Strength Strenth %El Uniformity
(g/m2)
(Mpa) (Mpa)

Requirements 0.12 0.60 0.04 0.04 330 210 20 N/A N/A

50 X 50 X BLK SHS 20104581 /


718 13.08 0.042 0.111 0.008 0.007 389 319 36 _ _
3.00 mm ( YST-210) 1201212B
80 X 40 X BLK SHS 20104280 /
432 9.4 0.058 0.188 0.015 0.005 399 314 34 _ _
2.00 mm ( YST-210) 7201212A
72 X 72 X BLK SHS 20104660 /
94 5.26 0.046 0.116 0.006 0.009 392 317 29 _ _
5.00 mm ( YST-210) 7201209B
It is certified that Material supplied conforms to standard dimensions and mass tolerances.
AUTHORISED SIGNATORY

PREPARED BY FOR APL APOLLO TUBES LIMITED

You might also like