Scribd
Upload
49 views

Silver Mill

The document summarizes the key parameters of an RO system called RO_1T_H including a flow rate of 22.2 m3/h, 75% recovery rate, 1046.8 ppm TDS in the feed water, and uses 18 membrane elements split between two arrays. It also notes that the system produces 16.7 m3/h of permeate water at 28.8 ppm TDS and warns that calcium carbonate saturation limits are exceeded so antiscalants may be required.

Uploaded by

akalankar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
49 views

Silver Mill

The document summarizes the key parameters of an RO system called RO_1T_H including a flow rate of 22.2 m3/h, 75% recovery rate, 1046.8 ppm TDS in the feed water, and uses 18 membrane elements split between two arrays. It also notes that the system produces 16.7 m3/h of permeate water at 28.8 ppm TDS and warns that calcium carbonate saturation limits are exceeded so antiscalants may be required.

Uploaded by

akalankar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Project Information

Project Name: RO_1T_H Date: 6/10/2023


Designed By: Untitled Company: Untitled

System Summary -- Pass 1


Feed Flow to Stage 1 22.2 m3/h PermeateFlow: 16.7 m3/h
Raw Water Flow to System 22.2 m3/h Recovery: 75.0 %
Feed Pressure: 7.9 bar Feed Temp: 25.0 C
Feed TDS 1046.8 ppm Number of Elements 18
Total Active Area 668.9 m2 Average System Flux 25.0 L/h-m2
Fouling Factor 0.85 WaterType RO Permeate SDI < 1
Power 5.95 KW Specific Energy 0.36 KWh/m3

Array 1 2
Elements Model ULP22-8040 ULP22-8040
No.of PV 2 1
Elements per PV 6 6
Boostpump pressure N/A .00
Permeate back pressure .00 .00

Summary of All Stages -- Pass 1 Unit: Flow m3/h, Pressure bar, TDS ppm
Stage Model #PV #Elem FeedFlow FeedPress ConcFlow ConcPress PermFlow PermTDS
1-1 ULP22-8040 2 6 22.2 7.7 9.2 6.5 13.1 28.8
1-2 ULP22-8040 1 6 9.2 6.2 5.5 5.2 3.6 70.8

Ionic Summary -- Pass 1(ppm)


Ions Raw Water Adjusted Water Concentrate Permeate
Na 258.9 258.9 1009.3 8.8
Ca 90.0 90.0 351.7 2.8
Mg 0.0 0.0 0.0 0.0
K 0.0 0.0 0.0 0.0
Ba 0.0 0.0 0.0 0.0
Sr 0.0 0.0 0.0 0.0
NH4 0.1 0.1 0.4 0.0
Cl 375.3 375.3 1475.3 8.5
CO3 0.0 0.0 0.0 0.0
HCO3 305.0 305.0 1169.4 16.9
F 0.0 0.0 0.0 0.0
NO3 4.5 4.5 17.3 0.2
SO4 0.0 0.0 0.0 0.0
SiO2 13.0 13.0 50.5 0.5
CO2 19.2 19.2 19.2 19.2
Boron 0.0 0.0 0.0 0.0
TDS 1046.8 1046.8 4073.8 37.7

Array Details -- Pass 1 Unit: Flow m3/h, Pressure bar, TDS ppm
Element Recovery PermFlow PermTDS FeedFlow FeedTDS FeedPressure
1-1 0.12 1.28 19.36 11.12 1046.80 7.69
1-2 0.12 1.20 22.27 9.84 1180.80 7.42
1-3 0.13 1.13 25.87 8.63 1342.37 7.17
1-4 0.14 1.05 30.45 7.50 1540.33 6.95
1-5 0.15 0.98 36.39 6.45 1786.81 6.79
1-6 0.16 0.89 44.33 5.47 2098.80 6.65
2-1 0.08 0.78 52.83 9.17 2498.57 6.23
2-2 0.08 0.70 59.70 8.39 2724.98 6.00
2-3 0.08 0.63 67.57 7.69 2968.73 5.80
2-4 0.08 0.57 76.60 7.05 3229.34 5.63
2-5 0.08 0.50 86.99 6.49 3505.02 5.47
2-6 0.07 0.44 99.00 5.98 3792.82 5.33

1 Pass RO System Warnings

1 pass RO system Solubility Warnings


CaCO3 Saturation limits exceeded ,Antiscalants may be required or change your system design.

1 pass RO system Design Warnings


None
Scaling Calculations
Feed Adjusted Feed Concentrate
pH 7.50 7.50 8.10
TDS 1046.80 1046.80 4187.20
HCO3 305.00 305.00 1220.00
CO3 0.00 0.00 0.00
CO2 19.24 19.24 19.24
LSI 0.35 0.35 2.09
Stiff&Davis Index 0.42 0.42 1.98
CaSO4 Saturation % 0.00 0.00 0.00
BaSO4 Saturation % 0.00 0.00 0.00
SrSO4 Saturation % 0.00 0.00 0.00
CaF2 Saturation % 0.00 0.00 0.00
SiO2 Saturation % 10.21 10.21 35.74

You might also like