Scribd
Upload
54 views1 page

Check Valves Wafer

Uploaded by

wfjerr
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
54 views1 page

Check Valves Wafer

Uploaded by

wfjerr
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

www.nibco.

com
AHEAD OF THE F L O W® Revision 5/21/2012

250 PSI WWP Iron Body Check Valves


Fire Protection Valve • UL listed FM Approved
Double-Door • Wafer Style • Rubber Seat • Spring Actuated

UL/ULC Listed • FM Approved*


Material List
Part Specification
Ductile Iron ASTM A536, Grade 65-45-12 - 2" thru 12"
1. Body 14" thru 16" Cast Iron ASTM 126, Class B w/ Buna-N
(Nitrile) resilient seat molded to body
2. Disc Bronze ASTM B584 Alloy C83600
3. Torsion Spring Stainless Steel
4. Hinge Pin Stainless Steel
KW-900-W
5. Stop Pin Stainless Steel
Wafer Style
6. Thrust Bearing Stainless Steel Body Style 21/2" - 12"
7. Hinge Pin Retainer Steel (excluding 5" & 6")
8. Stop Pin Retainer Steel
9. Stabilization Sphere Buna-N
10. Spacer High Density Polyethylene
NOTE:
21/2" - 12" UL Listed to 250 psi
4", 6", 8", 10" and 12" ULC Listed to 250 psi
14" & 16" FM Approved only to 200 psi

KW-900-W
Wafer

Drawing for sizes 21/2" thru 12"

Dimensions—Weights—Quantities
Dimensions
Size A B C D E Weight
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. C/V Lbs. Kg.
2½ 65 2.38 60 6.00 152 .125 3 3.50 89 1.313 33 108 4.3 1.95
3 80 2.63 67 5.63 143 .188 5 3.875 98 1.688 43 178 6.1 2.77
4 100 2.63 67 7.75 197 .625 16 4.75 121 3.063 78 440 8.8 3.99
5 125 3.25 83 7.56 192 .813 21 5.50 140 3.625 92 560 13.0 5.90
6 150 3.75 95 8.63 219 .813 21 6.25 159 4.250 108 840 18.0 8.16
8 200 5.00 127 12.25 311 1.000 25 8.00 203 5.500 140 1600 37.0 16.78
10 250 5.50 140 14.75 375 2.125 54 10.12 257 8.500 216 2700 65.0 29.48
12 300 7.13 181 17.38 441 1.938 49 12.00 305 9.250 235 4700 94.0 42.64 KW-900-W
14 350 7.25 184 17.75 451 3.250 83 — — 13.000 330 5200 200.0 90.75 Wafer Style
16 400 7.50 191 20.25 514 4.500 114 — — 15.000 381 7200 285.0 129.28 Body Style 5", 6", 14" & 16"
*Note: 14” and 16” sizes, 200 PSI WWP, FM approved only.
Features NOTE: Twin Disc Check Valves can be installed horizontally or in the
• Spring loaded for fast closure, eliminating reverse flow slam and water hammer. vertical position with flow up.
• Easily installed, with gasket, between standard class 125 flanges. CAUTION: For horizontal flow applications, the valve must be installed with
• Only one set of flange studs is needed. disc hinge pin in the vertical position to insure proper operation.
• May be installed in both horizontal and vertical lines with upward flow. WARNING:
1. These are not to be used as steam valves
2. Valves are not to be used near a reciprocating air compressor
3. Install 5 pipe diameters minimum downstream from pump
discharge or elbows to avoid flow turbulence. Flow
straighteners may be required in extreme cases.
NOTE: On pump discharge, the preferred check valves are in-line spring loaded.

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
28 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com

You might also like