Terramix Super Int - Eng
Terramix Super Int - Eng
OVERVIEW
Terramix Super Interior is an interior skimcoat and repair compound for filling fine cracks and surface defects in
light weight concrete, fairfaced dense concrete, blockwork and brickwork. It is used to give a hard, smooth
water resistant finish suitable for painting or wallpapering.
CURING
AREAS OF USE
It is advisable to keep the surface moist during the
For filling or repairing fine cracks and surface
first 48 hours to ensure proper curing.
defects in concrete, blockwork and brickwork, in
order to produce a surface of the highest quality
for final decoration. HEALTH & SAFETY
Avoid prolonged contact with eyes and skin. For
PREPARATION OF SURFACE detailed information refer to relevant material
Remove all oil, grease, dirt, foreign substance safety data sheet.
and loose particles. Absorbent, porous surfaces
should be moistened with water prior to the PACKAGING & STORAGE
application of Terramix Super Interior. Terramix Super Interior is supplied in 40kg paper
sacks.
On extremely absorbent, porous surfaces or
under extreme climatic conditions, the standard Store containers in a clean dry area protected from
code of practice for use of cementilious products direct sunlight and extreme heat and cold.
should be followed. Priming and / or addition of Unopened containers can be stored for 12 months.
one of the concentrated Terrabond AC100 Use oldest material first.
bonding agents to the mixing water, ratio 1:15
bonding agent : water is recommended
MIXING INSTRUCTIONS
Mix the Terramix Super Interior with the
recommended water with a high speed mixer or
with a hand agitator for 3 – 5 minutes. In normal
condition, let Terramix Super Interior set for 5
minutes, restir and use.
TERRACO offers a comprehensive range of products and services for most concrete and finishing needs.
Please contact the TERRACO Technical Service Department or your local TERRACO agent for further
information, samples, demonstrations and instructor services. The information given in this leaflet is based
upon laboratory research, as well as extensive field work and application. All products are sold subject to
standard conditions of sale which are available on request. This information is based on TERRACO’s present
state of knowledge and is intended to provide general information on TERRACO’s products and their
methods of use. The prospective user is recommended to determine the suitability of TERRACO’s suggestions
and products before adopting them on a commercial scale.
For further details visit: www.terraco.com V. 06.2022 - Issued by Terraco Technical Centre, Ireland
TERRAMIX SUPER INTERIOR
CEMENTITIOUS SKIMCOAT PLASTER
TECHNICAL DATA
Product Cementitious skimcoat plaster in powder form.
Fillers Inert finely graded fillers.
Additives Plasticising agents, adhesion promoting agents and water retaining agents.
Thickness of Layer Levelling coat to a maximum of 2mm per coat
Comsumption Approximately 1.0 – 1.4 kg/m2 per 1mm thickness.
Water Consumption 12-14ltr water/40kg
Colour White
Packaging 40kg paper bags
Storage 12 months in original unopened containers.
For further details visit: www.terraco.com V. 06.2022 - Issued by Terraco Technical Centre, Ireland