TWO-POST LIFTS

SPOA3T/ SPOA40
SPO40/54/65

Equipment
THE GARAGE EQUIPMENT SPECIALISTS
 SPOA3T
THE SPOA3T 2-POST LIFTS OFFER MAXIMUM DRIVE-THROUGH CLEARANCE WITH MINIMUM EXTERNAL DIMENSIONS. THE
ASYMMETRICAL DESIGN OF THE POSTS AND SUPPORTING ARMS ALSO PROVIDES A SPACIOUS PICK-UP AREA.

The energy-efficient
electro-hydraulic de-
Non load bearing sign provides for low
cables ensure even noise and economic
lifting and lowering. work.

An limit bar prevents

the vehicle from being The powerful hydraulic
lifted too high. This unit is flange-mounted
feature effectively in the upper area of
protects taller vehicles the lifting column.
from being damaged. The motor is equipped
with a temperature-
The mechanical safety operated switch as an
latch integrated on overload protection.
both columns locks the It is protected against
lift carriage in position outside influences and
in emergency situa- ensures more freedom
tions and thus ensures of action and low
For increased ergo-
maximum safety. The noise in the work bay.
nomics and productiv-
safety latch is released
ity a second Control
automatically when
panel for SPOA3TS can
the lift carriage is
be ordered.
raised or lowered.
Each lifting column
features a mainte-
nance-free high pres-
sure cylinder.

The basic frame free

design ensures easy to
access the lift.

The image shows SPOA3TS with second control panel and accessories.

DETAILS The supporting arms are automati-

CONTROLLER VERSIONS Electrical control
The asymmetrical design of the cally locked in position during the Manual control • Single-hand operating unit on both
posts and supporting arms also lifting operation. Once the lift has • Conventional operation using one lifting columns possible.
provides a spacious pick-up area. been completely lowered, this hand • Electrically triggered safety latches.
interlock is automatically released. • Manual lock release. • Lifting and lowering with pushbut-
The very narrow spacing between tons.
the locking positions and a manual • Integrated 220 V connection and
unlocking function enhance the ease prepared for compressed air connec-
of use. tion at 2nd panel (SOA3TS)
 Model: Supporting Supporting Supporting arms
arms arms Asymmetric
Asymmetric Asymmetric SPOA3TS-
SPOA3TM-5 SPOA3TS-5 5-AP
Capacity 3500 kg 3500 kg 3500 kg
A. Stroke 1957 mm 1957 mm 1957 mm
Overall height EH1 3865 mm 3865 mm 3765mm
B.
Overall height EH2 4170 mm 4170 mm 4070 mm
C. Overall width 3000 mm 3000 mm 3321 mm
D. Drive through clearance 2336 mm 2336 mm 2536 mm
Switchoff level EH1 3760 mm 3760 mm 3660 mm
E. The asymmetrical construction combined
Switchoff level EH2 4065 mm 4065 mm 3965 mm
with the design of the supporting arms
F. Support bracket length on the front min. 550 mm 550 mm 550 mm
provides good door clearance – either in
G. Support bracket length on the front max. 1106 mm 1106 mm 1106 mm front of or behind the lifting post.
H. Support bracket length on the rear min. 876 mm 876 mm 876 mm
I. Support bracket length on the rear max. 1472 mm 1472 mm 1472 mm
J. Rotary plate height min. 94 mm 94 mm 94 mm
K. Rotary plate height max. 154 mm 154 mm 154 mm
M. Column spacing, interior dimension 2560 mm 2560 mm 2760 mm
Motor performance 4,0 kW 4,0 kW 4,0 kW
Electrical connection 400 V, 400 V, 400 V,
(3 phases) 50 Hz 50 Hz 50 Hz
Lifting time 30 sec. 30 sec. 30 sec.
Required ceiling height EH1 3920 mm 3920 mm 3820 mm
Required ceiling height EH1 4230 mm 4230 mm 4130 mm

M Manual control
S Electrical control ACCESSORIES
Support kit for delivery trucks/vans Vehicle security for rotary plate
DIMESNIONS SHOWN ARE PROVIDED BY THE MANUFACTURER AND (4 x U-support), Article No. FJ6173 with 120 mm diameter,
ARE CORRECT AT TIME OF PRINT. Article No. FS6353-1

Rotary adaptor extension kit for pas- Tool storage trays, magnetic,
E
B senger cars (4 x 89 mm, 4 x 127 mm), Article No. FA5921
Article No. FJ6199

J K

C
D

New manual control options for 3 t Sports car supporting arm (4 x 3-stage)
FG lift SPOA3TM

HI
 SPOA40NB, SPOA40, SPO40
ELECTRO-HYDRAULIC TWO-POST LIFTS OF THE SPO SERIES CAN BE TAILORED PERFECTLY TO FIT THE APPLICATION AND CAN BE
COMBINED WITH UP TO THREE DIFFERENT COLUMN HEIGHTS. THERE ARE ONE MANUAL AND ONE ELECTRICAL CONTROLLER
VERSIONS TO CHOOSE FROM.

The energy-efficient
electro-hydraulic de-
sign provides for low
noise and economic
Non load bearing work.
cables ensure even
lifting and lowering.
An upper limit bar pre-
vents the vehicle from
being lifted too high.
This feature effectively
protects taller vehicles
from being damaged. For increased ergo-
nomics and productiv-
Each lifting column The double S-profile ity, all E-models have
features a mainte- of the lifting columns been equipped with
nance-free high pres- provide for utmost a second control unit.
sure cylinder. stability at minimum Because of the work-
space requirements. In shop environment,
addition, the contact the pushbuttons can
surface area of the also be pressed when
carriage slider bear- wearing gloves.
ings is considerably
increased, which
protects the column
from premature wear.
The mechanical safety
latch integrated on
both columns locks the
lift carriage in position
in emergency situa-
tions and thus ensures
maximum safety.

The control units

The basic frame free (E-model) are equipped
design ensures easy to with a 220 V GFI
access the lift. socket for connecting
electrical equipment.
The image shows SPO40E with optional accessories.

DETAILS CONTROLLER VERSIONS Electrical control

The supporting arms are automati- The powerful hydraulic unit is flange- Manual control • Single-hand operating unit on both
cally locked in position during the lift- mounted in the upper area of the lifting • Conventional operation using two lifting columns.
ing operation. Once the lift has been column. The motor is equipped with hands • Electrically triggered safety latches.
completely lowered, this interlock a temperature-operated switch as an • Manual lock release. • Lifting and lowering with pushbut-
is automatically released. The very overload protection. It is protected tons, one control unit with integrat-
narrow spacing between the locking against outside influences and ensures ed 220 V connection, and the other
positions and a manual unlocking more freedom of action and low noise in panel prepared for compressed air
function enhance the ease of use. the work bay. connection.
 Model: Supporting arms Supporting arms Supporting arms Supporting arms Supporting
Asymmetric Asymmetric Asymmetric Symmetric arms
SPOA40NB SPOA40M SPOA40E SPO40M Symmetric
SPO40E
Capacity 4000 kg 4000 kg 4000 kg 4000 kg 4000 kg
A. Stroke 1957 mm 1957 mm 1957 mm 1979 mm 1979 mm
Overall height EH1 3865 mm 3865 mm 3865 mm 3865 mm 3865 mm
ACCESSORIES
B. Overall height EH2 4170 mm 4170 mm 4170 mm 4170 mm 4170 mm
Overall height EH4 - - - 4780 mm 4780 mm
Rotary adaptor extension kit for
C. Overall width 3337 mm 3440 mm 3440 mm 3496 mm 3496 mm passenger cars (4 x 89 mm, 4 x
(Outside of base plate)
127 mm), Article No. FJ7880BK
D. Drive through clearance 2261 mm 2546 mm 2546 mm 2590 mm 2590 mm
Switchoff level EH1 3760 mm 3760 mm 3760 mm 3760 mm 3760 mm
E. Switchoff level EH2 4065 mm 4065 mm 4065 mm 4065 mm 4065 mm
Switchoff level EH4 - - - 4675 mm 4675 mm
F. Support bracket length on the front min. 550 mm 550 mm 550 mm 700 mm 700 mm
G. Support bracket length on the front max. 1106 mm 1106 mm 1106 mm 1500 mm 1500 mm
H. Support bracket length on the rear min. 876 mm 876 mm 876 mm 700 mm 700 mm
I. Support bracket length on the rear max. 1472 mm 1472 mm 1472 mm 1500 mm 1500 mm
Rotary adaptor extension kit for
J. Rotary plate height min. 94 mm 94 mm 94 mm 109 mm 109 mm
delivery trucks/vans (4 x 200 mm),
K. Rotary plate height max. 154 mm 154 mm 154 mm 179 mm 179 mm Article No. FJ6172
M. Column spacing, interior dimension 2825 mm 2825 mm 2825 mm 2908 mm 2908 mm
Motor performance 4 kW 4 kW 4 kW 4 kW 4 kW
Electrical connection 400 V, 50
230/400 V, 50 Hz 230/400 V, 50 Hz 400 V, 50 Hz 230/400 V, 50 Hz
(3 phases) Hz
Lifting time 30 sec. 30 sec. 30 sec. 30 sec. 30 sec.
Required ceiling height EH1 33920 mm 33920 mm 3920 mm 3920 mm 3920 mm
Required ceiling height EH2 4230 mm 4230 mm 4230 mm 4230 mm 4230 mm
Required ceiling height EH4 - - - 4840 mm 4840 mm
Vehicle security for rotary plate
M Manual control DIMESNIONS SHOWN ARE PROVIDED BY THE MANUFACTURER AND ARE CORRECT AT TIME with 120 mm diameter, Article No.
E Electrical control OF PRINT. FS6353-1

Support kit for delivery trucks/vans

(4 x U-support), Article No. FJ6173

Sports car supporting arm (4 x 3-stage)

Asymmetric Symmetric
 SPO54, SPO65
ON ACCOUNT OF THEIR HIGH LOAD LIFTING CAPACITY THE SPO54 AND THE NEW SPO65 ARE ESPECIALLY SUITABLE FOR LIGHT-DUTY
COMMERCIAL VEHICLES. THE SPO54 RANGE IS IDEAL FOR MEDIUM CARS THROUGH TO LONG WHEEL BASED VANS SUCH AS THE
SPRINTER AND CRAFTER WHILST THE SPO65 CAN COPE WITH SMALL VANS THROUGH TO LIGHT TRUCKS.

The energy-efficient
electro-hydraulic de-
sign provides for low
Non load bearing noise and economic
cables ensure even work.
lifting and lowering.

An upper limit bar pre- For increased ergo-

vents the vehicle from nomics and productiv-
being lifted too high. ity, all E-models have
This feature effectively been equipped with
Each lifting column protects taller vehicles a second control unit.
features a mainte- from being damaged. Because of the work-
nance-free high pres- shop environment,
sure cylinder. the pushbuttons can
also be pressed when
wearing gloves.

The mechanical safety

latch integrated on
both columns locks the The double S-profile
lift carriage in position of the lifting columns
and thus ensures provide for utmost
maximum safety. stability at minimum
space requirements. In
addition, the contact
surface area of the
carriage slider bear-
The basic frame free ings is considerably
design ensures easy to increased, which pro-
access the lift. tects the column from
premature wear.
The image shows SPO65E with optional accessories.

DETAILS CONTROLLER VERSIONS

The lift carriage bearings are made The supporting arms are automati- Manual control Electrical control
of self-lubricating and absolutely cally locked in position during the lift- • Conventional operation using two • Single-hand operating unit on both
maintenance-free Tivar® 1000 ing operation. Once the lift has been hands lifting columns.
polyethylene. Two characteristics completely lowered, this interlock is • Manual lock release. • Electrically controlled safety latches
that help reduce operating expenses automatically released. The very narrow (SPO65 pneumatically).
considerably. spacing between the locking positions • Sensitive pushbuttons.
and a manual unlocking function en- • Integrated 220 V connection, pre-
hance the ease of use. pared for connecting compressed air.
 Rotary adaptor extension kit for
Model: Supporting arms Supporting arms Supporting arms Supporting arms passenger cars (4 x 89 mm, 4
Symmetric Symmetric Symmetric Symmetric x 127 mm), SPO54 Article No.
SPO54M SPO54E SPO65M SPO65E-LWB FJ7880BK
Capacity 5000 kg 5000 kg 6500 kg 6500 kg
A. Stroke 1989 mm 1989 mm 2005 mm 2005 mm
Overall height 4170 mm 4170 mm 4546-5004 mm* 4546-5004 mm*
B. EH1 4475 mm 4475 mm - -
EH2 4780 mm 4780 mm - -

C. Overall width 3496 mm 3496 mm 3937 mm 3937 mm

(Outside of base plate)

D. Drive through clearance 2613 mm 2613 mm 2687 mm 2687 mm Rotary adaptor extension kit for
Switchoff level 4065 mm 4065 mm 4436-4894 mm* 4436-4894 mm* delivery trucks/vans (4 x 200 mm),
E. EH1 4360 mm 4360 mm - - SPO54 Article No. FJ6172
EH2 4675 mm 4675 mm - -
F. Support bracket length on the front min. 765 mm 765 mm 935 mm 935 mm
G. Support bracket length on the front max. 1640 mm 1640 mm 1901 mm 1901 mm
H. Support bracket length on the rear min. 765 mm 765 mm 935 mm 935 mm
I. Support bracket length on the rear max. 1640 mm 1640 mm 1901 mm 1901 mm
J. Rotary plate height min. 119 mm 119 mm 115 mm 115 mm
K. Rotary plate height max. 189 mmm 189 mmm 175 mm 175 mm
M. Column spacing, interior dimension 2915 mm 2915 mm 3058 mm 3058 mm Turntable Set for SPO65 (4 pieces), Art.
No. FJ6217MB
Motor performance 3 kW 3 kW 3 kW 3 kW
Electrical connection 230/400 V, 230/400 V,
230/400 V, 50 Hz 230/400 V, 50 Hz
(3 phases) 50 Hz 50 Hz
Lifting time 60 sec. 60 sec. 60 sec. 60 sec.
Required ceiling height 4230 mm 4230 mm 4700-5150 mm* 4700-5150 mm*
EH1 4530 mm 4530 mm - -
EH2 4840 mm 4840 mm - -

ACCESSORIES
DIMESNIONS SHOWN ARE PROVIDED BY THE MANUFACTURER AND
ARE CORRECT AT TIME OF PRINT. Support kit for Sprinter/Crafter Vehicle security for rotary plate
(2 pieces) behind, SPO54 Art. No. with 120 mm diameter (2 pieces),
M Manual control FJ6215MB, SPO65 Art. No FJ6215MB Article No. FS6353-1
E Electrical control + 2x 115684

* can be adjusted every 150 mm

M
E
Support kit for Sprinter/Crafter Support kit for delivery trucks/vans
(2 pieces) front, SPO54 Art. No. (4 x U-support), SPO54 Article No.
B FJ6173
FJ6216

A
J K

C
D

Support kit for Sprinter/Crafter Supporting arm extension SPO54,

FG

(2 pieces) front, SPO65 Art. Nr. 300mm, Article No. AE-300

FJ6216MB

HI
 NOT JUST SUPPLIERS...
BUT THE GARAGE EQUIPMENT SPECIALISTS...

FOR SINGLE ITEMS OF EQUIPMENT RIGHT UP TO THE...

BIGGEST GREEN FIELD PROJECTS FROM START TO FINISH
By engineers with recognised trade qualifiications and regular, scheduled training.
MAKE SURE YOUR EQUIPMENT
AND INSTALLATION IS... Applying GEA demands for qualified standards and professionalism.

Using the highest quality CE approved products from proven suppliers.

A DE To the standards defined by the quipment manufacturers, ISO and VOSA.

R Honouring all appropriate health and safety stipulations and codes of practice.
T

Supported by a programme of manufacturer service and calibration schedules.

ED

... PROVIDING GUARANTEED

P P RO
V
A

k TRADE APPROVED INSTALLATIONS

(01322) 666432
[email protected] www.kentgarageequipment.co.uk

SALES - SERVICE - DESIGN - INSTALLATION

Kent Garage Equipment Ltd
The Range, Clement Street,
Swanley, Kent. BR8 7PQ

Email : sales @kentgarageequipment.co.uk

Website: www.kentgarageequipment.co.uk

Tel: 01322 666432

Company registration number : 10124440