DESIGN CALCULATION

PROJECT
CATAINGAN PROJECT
ITEM
POWERHOUSE
LOCATION
CATAINGAN, MASBATE, PHILIPPINES

Hochiminh City, 11/2021

 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description INTRODUCTION
Checked By JCT

INTRODUCTION

This design calculations package has been prepared using the latest applicable
American codes and standards and the latest developments in engineering practices. A
competent design engineer prepared the calculations and another component engineer
checked his work. The initials of both engineers are shown on most pages.

Computer programs have been used where applicable to determine structural

requirements. The output of these programs has been incorporated in this package
together with explanation text where possible. The whole package has been prepared
using an advanced computer text processor.

For your easy reference, all pages have been numbered and a table of contents has
been provided. We have divided the package into two sections as follows:

1. Design Information:

This section contains the description of the building designed, design codes and
material specifications used, design assumptions, loads and design sketches showing
building components layouts and members sizes.

2. Computer Design Printouts:

This section includes the output of computer programs used in the design along with
explanations for the output where possible.

Please use this calculations package in conjunction with the drawings provided. You
can resubmit this package with the drawings to other parties for their approval as
required, or, keep this package for future reference. BMB&A does not require these
calculations to be returned.

For any questions regarding this package please do not hesitate to contact our sales
office. BMB&A keeps records of reference on design calculations for each building
designed as a part of BMB&A total quality system.

Engineering Department
BMB&A J/SC.

2
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description TABLE OF CONTENTS
Checked By JCT

TABLE OF CONTENTS
INTRODUCTION .................................................................................................................... 2
TABLE OF CONTENTS ......................................................................................................... 3
SECTION 1. DESIGN INFORMATION ................................................................................... 4
Applicable Design Codes ................................................................................................... 5
Material Specifications ....................................................................................................... 6
Design Assumptions .......................................................................................................... 7
Basic Load Combinations and Deflection Limitations ......................................................... 8
Design Summary ............................................................................................................... 9
SECTION 2. DESIGN CALCULATION ................................................................................ 10
Load Combinations .......................................................................................................... 11
Load Applications ............................................................................................................ 14

A. DESIGN SECTIONS FRAME K2 ................................................................................ 21

B. DESIGN SECTIONS FRAME K5 ................................................................................ 42

C. DESIGN OF COLD-FORMED
Design Of Purlin From GL.1 To GL.4 ............................................................................... 76
Design Of Purlin From GL.5 To GL.9 ............................................................................... 80
Design Of Girt .................................................................................................................. 84
Design Of Eave Strut ....................................................................................................... 88

D. DESIGN OF BRACING ............................................................................................... 93

E. DESIGN RUNWAY BEAM .......................................................................................... 94

F. DESIGN OF CONNECTIONS
Anchor bolt B1 ................................................................................................................. 97
Anchor bolt B2 ............................................................................................................... 106
Connection Bolt MEP 4 4 24 .......................................................................................... 115
Connection Bolt RS 4 4 20 At Frame K5 ........................................................................ 126
Connection Bolt MEP 2 4 16 .......................................................................................... 134
Section Bolt RS 4 4 20 At Frame K2 .............................................................................. 144
Design For Welding Column C2..................................................................................... 151
Design For Welding Beam R3........................................................................................ 152
Design Flage Bracing GL.1 To GL.4 .............................................................................. 153
Design Flage Bracing GL.5 To GL.9 .............................................................................. 155

SECTION 3: COMPUTER DESIGN PRINTOUTS .............................................................. 158

1. Element Forces Frame K2 ......................................................................................... 159
2. Element Forces Frame K5 ......................................................................................... 178

3
Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021

SECTION 1 Designed By LHD

Description
DESIGN INFORMATION Checked By JCT

SECTION 1
DESIGN INFORMATION

4
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description APPLICABLE DESIGN CODES
Checked By JCT

APPLICABLE DESIGN CODES

The Pre-Engineered Building described in these calculations was designed according to

the latest U.S.A. Buildings and Design Codes that have been referred to in the design:

1. “Minimum Design Loads For Buildings And Other Structures”, ASCE 7-10.

2. “International Buildings Code”, IBC– 2012.

3. “Metal Building Systems Manual 2012” issued by MBMA.

4. “American Institute of Steel Construction” - Allowable Stress Design, AISC 360-10.

5. Cold formed components have been designed in accordance with:

“American Iron and Steel Institute” Cold Formed Steel Design Manual, AISI S100-2007

6. Welding has been applied in accordance with:

“American Welding Society”, AWS-2010.

7. Earthquake load has been considered accordance with:

“Uniform Building Code", UBC 1997 Edition.

5
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description MATERIAL SPECIFICATIONS
Checked By JCT

MATERIAL SPECIFICATIONS
The following is the list of the material standards and specifications for which the boiling
components have been designed:
MATERIAL SPECIFICATIONS

No. Materials Specifications Minimum Strength

ASTM-A572 GR 50
1 Built- up Fy = 34.5 kN/cm2
or equivalent

2 Hot Rolled JIS 3101/SS400 Fy = 23.5 kN/cm2

Cold Formed Light Gauge JIS G3302, SGH 490

3 Fy = 45.0 kN/cm2
Shapes, Purlin or equivalent

4 Checkered plate SS400B or equivalent Fy = 23.5 kN/cm2

JIS 3101 / SS400

5 X- Bracing Fu = 40.0 kN/cm2
or equivalent

6 Anchor Bolts (Grade 5.6) Fu = 50.0 kN/cm2

Machine Bolts for Purlin/Girt

7 DIN 933 type 4.6 or equivalent Fu = 40.0 kN/cm2
Connections
High Strength Bolts
8 DIN 933 type 10.9 or equivalent Fu = 100 kN/cm2
(Grade 10.9)

6
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN ASSUMPTIONS
Checked By JCT

DESIGN ASSUMPTIONS

The main frame rafters and exterior columns are rigidly connected to each other (using
moment type connections).

Steel columns are Pin-connected to the foundation. Exceptd B5 Steel column is Fix-
connected to the foundation.

The lateral stability of the building is provided through the frame action of the main
frames.

The frame at the end wall at GL.5 & GL.9 are made of fix connected rafters and
columns and the lateral stability of the endwall frame is provided by the frame action of
the endwall frames and bracing X.

The longitudinal stability of the building is provided through the truss action in the cross
braced bays of the buildings.

The end wall girts grid line GL.5 & GL.9 are coutinous beams supported at the wind
column locations and span the wind column spacing of the endwall.

The roof purlins are continuous beams supported at rigid frame locations and span the
bay spacing of the buildings.

The roof sheeting provides lateral support for purlins.

The building is designed as a fully enclosed building.

The important factor for wind loads is taken as unity.

7
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021

BASIC LOAD COMBINATIONS Designed By LHD

Description
& DEFLECTION LIMITTATIONS Checked By JCT

BASIC LOAD COMBINATIONS

& DEFLECTION LIMITTATIONS
REFERENCE DOCUMENTATION
ASCE 7-10: BASIC LOAD COMBINATIONS USING ALLOWABLE STRESS DESIGN:
* APPLIED FOR FRAME STRUCTURE
1. Dead Load (DL)
2. Dead Load (DL) + Live Load (LL)
3. Dead Load (DL) + Live Load (Mezzanine or Crane)
4. Dead Load (DL) + 0.75 Live Load (LL) + 0.75 Live Load (Floor /Crane)
5. Dead Load (DL) + [ 0.6 Wind Load (WL) or 0.7 Earthquake load (EL) ]
6a. Dead Load (DL) + 0.75 Live Load (LL) + 0.75 Live Load (Floor /Crane) +0.45 Wind Load (WL)
6b. Dead Load (DL) + 0.75 Live Load (LL) + 0.525 Earthquake load (EL)
7. 0.6 Dead Load + 0.6 Wind Load (WL)
8. 0.6 Dead Load + 0.7 Earthquake load (EL)
* APPLIED FOR COLD-FORMED SECTION
1. Dead Load (D) + Roof Live Load (Lr)
2. Dead Load + 0.6 Wind Load (WL)
3. 0.6 Dead Load + 0.6 Wind Load (WL)
MBMA 2012: Deflection Limitations
CONTRUCTION LOAD & DEFORMATION REMARK
1/ Rafter (Vertical deflection)1 LL DL + LL
a/ Supporting plaster ceiling L/360 L/240
b/ Supporting nonplaster ceiling L/240 L/180
c/ Not supporting ceiling L/180 L/120
2
2/ Column (Horizontal deflection) DL + WL 10 yr. H/60 10 Yr. Wind
1
II/ Purlin DL + LL DL + WL 10 yr.
10 Year
1/ Purlin (Vertical deflection) L/150 L/150
Wind
2/ Girt (Horizontal deflection) L/120 L/120
III/ Floor members (Vertical deflection) LL DL + LL
Beam, Joist, Decking, Checker Plate L/360 L/240
3
IV/ Top Running Cranes DL + CR
1/ Runway Beam (Vertical deflection) L/600
2/ Runway Beam (Horizontal deflection) L/400
3
V/ Crane Bracket (Horizontal deflection) DL + CR or WL 10 yr. Crane lateral
1/ Cab or Radio - Operator cranes H/240 or ≤ 5.08cm or 10 Yr.
2/ Pendant - Operator cranes H/100 Wind

1
Metal Building Systems Manual 2012, Table 1.3.1 (b), page 6.
2
Metal Building Systems Manual 2012, Table 3.3, page 331.
3
Metal Building Systems Manual 2012, Table 3.5, page 333.

8
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN SUMMARY
Checked By JCT

DESIGN SUMMARY
(mm) GL.1 to GL.4: 15000
Building Width
GL.5 to GL.9: 15300
Bay Spacing (mm) Refer to drawing
Height (mm) Refer to drawing
(%) GL.1 to GL.4: 16.95%
Roof Slope
GL.5 to GL.9: Refer to drawing

2
Dead Load (kN/m ) 0.15
2
Live Load on Purlins (kN/m ) 0.60
2
Live Load on Frame (kN/m ) 0.60
2
(kN/m ) GL.1 T to GL.4: 0.10
Collateral load on Purlin
GL.5 T to GL.9: 0.00
Wind Speed (km/h) 290 Exposure C
Crane load (T) 3 Ton Refer to drawing
Earthquake load Seismic Grade IV; Ground SD

GL.1 to GL.7: Z 175x50x56x1.8

Purlin
GL.7 to GL.9: Z 175x50x56x2.3
Lap Lapped continuous (10% L)
Max. Tributary 1400
Side Wall Girt Z 175x50x56x2.3
Lap Lapped continuous (10% L)
Max. Tributary
End Wall Girt Z 175x50x56x1.8
Lap Lapped continuous (10% L)
Max. Tributary
Eave Strut Z 175x50x56x2.3

Bracing No. of Bays Type

Roof 4 Ø20
Side Wall Refer to drawing Ø20 & Portal Frame
End Wall - GL.5 T to GL.9 Refer to drawing Ø20 & Portal Frame

NOTE:
- Provide 01 rows U58x28x8x1.2 on the roof

9
Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021

SECTION 2 Designed By LHD

Description
DESIGN CALCULATION Checked By JCT

SECTION 2
DESIGN CALCULATION

10
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description LOAD COMBINATIONS
Checked By JCT

LOAD COMBINATIONS
The frame is designed to support self-weighting added:
LOAD TYPE VALUE SYMBOL
Dead load 0.15 kN/m2 DL
2
Collateral load 0.1 kN/m AL
2
Live load on frame 0.6 kN/m LL
Live load on floor Refer to drawing FL
Rate capacity of crane 3T CR1, CR2
Wind speed 290 km/h WL1, WL2, WL3, WL4, WL5, WL6
Earthquake load EL1, EL2
CR1, CR2, EL1, EL2 : Don’t Effect On K2 Frame
AL : Don’t Effect On K5 Frame

Load combination: (ASCE 7 –10)

COMBO 1 1DL
COMBO 2 1DL + 1LL
COMBO 3 1DL + 0.6WL1
COMBO 4 1DL + 0.6WL2
COMBO 5 1DL + 0.6WL3
COMBO 6 1DL + 0.6WL4
COMBO 7 1DL + 0.6WL5
COMBO 8 1DL + 0.6WL6
COMBO 9 1DL + 1AL
COMBO 10 1DL + 1AL + 1LL
COMBO 11 1DL + 1AL + 1FL
COMBO 12 1DL + 1AL + 1CR1
COMBO 13 1DL + 1AL + 1CR2
COMBO 14 1DL + 1AL + 0.75LL + 0.75FL
COMBO 15 1DL + 1AL + 0.75LL + 0.75CR1
COMBO 16 1DL + 1AL + 0.75LL + 0.75CR2
COMBO 17 1DL + 1AL + 0.75FL + 0.75CR1
COMBO 18 1DL + 1AL + 0.75FL + 0.75CR2
COMBO 19 1DL + 1AL + 0.75LL + 0.75FL + 0.75CR1
COMBO 20 1DL + 1AL + 0.75LL + 0.75FL + 0.75CR2
COMBO 21 1DL + 1AL + 0.6WL1
COMBO 22 1DL + 1AL + 0.6WL2
COMBO 23 1DL + 1AL + 0.6WL3
COMBO 24 1DL + 1AL + 0.6WL4
COMBO 25 1DL + 1AL + 0.6WL5
COMBO 26 1DL + 1AL + 0.6WL6
COMBO 27 1DL + 1AL + 0.7EL1
COMBO 28 1DL + 1AL + 0.7EL2
COMBO 29 1DL + 1AL + 0.75LL + 0.75FL + 0.45WL1
COMBO 30 1DL + 1AL + 0.75LL + 0.75FL + 0.45WL2
COMBO 31 1DL + 1AL + 0.75LL + 0.75FL + 0.45WL3

11
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description LOAD COMBINATIONS
Checked By JCT
COMBO 32 1DL + 1AL + 0.75LL + 0.75FL + 0.45WL4
COMBO 33 1DL + 1AL + 0.75LL + 0.75FL + 0.45WL5
COMBO 34 1DL + 1AL + 0.75LL + 0.75FL + 0.45WL6
COMBO 35 1DL + 1AL + 0.75LL + 0.75CR1 + 0.45WL1
COMBO 36 1DL + 1AL + 0.75LL + 0.75CR2 + 0.45WL1
COMBO 37 1DL + 1AL + 0.75LL + 0.75CR1 + 0.45WL2
COMBO 38 1DL + 1AL + 0.75LL + 0.75CR2 + 0.45WL2
COMBO 39 1DL + 1AL + 0.75LL + 0.75CR1 + 0.45WL3
COMBO 40 1DL + 1AL + 0.75LL + 0.75CR2 + 0.45WL3
COMBO 41 1DL + 1AL + 0.75LL + 0.75CR1 + 0.45WL4
COMBO 42 1DL + 1AL + 0.75LL + 0.75CR2 + 0.45WL4
COMBO 43 1DL + 1AL + 0.75LL + 0.75CR1 + 0.45WL5
COMBO 44 1DL + 1AL + 0.75LL + 0.75CR2 + 0.45WL5
COMBO 45 1DL + 1AL + 0.75LL + 0.75CR1 + 0.45WL6
COMBO 46 1DL + 1AL + 0.75LL + 0.75CR2 + 0.45WL6
COMBO 47 1DL + 1AL + 0.75LL + 0.75FL + 0.75CR1 + 0.45WL1
COMBO 48 1DL + 1AL + 0.75LL + 0.75FL + 0.75CR2 + 0.45WL1
COMBO 49 1DL + 1AL + 0.75LL + 0.75FL + 0.75CR1 + 0.45WL2
COMBO 50 1DL + 1AL + 0.75LL + 0.75FL + 0.75CR2 + 0.45WL2
COMBO 51 1DL + 1AL + 0.75LL + 0.75FL + 0.75CR1 + 0.45WL3
COMBO 52 1DL + 1AL + 0.75LL + 0.75FL + 0.75CR2 + 0.45WL3
COMBO 53 1DL + 1AL + 0.75LL + 0.75FL + 0.75CR1 + 0.45WL4
COMBO 54 1DL + 1AL + 0.75LL + 0.75FL + 0.75CR2 + 0.45WL4
COMBO 55 1DL + 1AL + 0.75LL + 0.75FL + 0.75CR1 + 0.45WL5
COMBO 56 1DL + 1AL + 0.75LL + 0.75FL + 0.75CR2 + 0.45WL5
COMBO 57 1DL + 1AL + 0.75LL + 0.75FL + 0.75CR1 + 0.45WL6
COMBO 58 1DL + 1AL + 0.75LL + 0.75FL + 0.75CR2 + 0.45WL6
COMBO 59 1DL + 1AL + 0.75FL + 0.45WL1
COMBO 60 1DL + 1AL + 0.75FL + 0.45WL2
COMBO 61 1DL + 1AL + 0.75FL + 0.45WL3
COMBO 62 1DL + 1AL + 0.75FL + 0.45WL4
COMBO 63 1DL + 1AL + 0.75FL + 0.45WL5
COMBO 64 1DL + 1AL + 0.75FL + 0.45WL6
COMBO 65 1DL + 1AL + 0.75LL + 0.45WL1
COMBO 66 1DL + 1AL + 0.75LL + 0.45WL2
COMBO 67 1DL + 1AL + 0.75LL + 0.45WL3
COMBO 68 1DL + 1AL + 0.75LL + 0.45WL4
COMBO 69 1DL + 1AL + 0.75LL + 0.45WL5
COMBO 70 1DL + 1AL + 0.75LL + 0.45WL6
COMBO 71 1DL + 1AL + 0.75CR1 + 0.45WL1
COMBO 72 1DL + 1AL + 0.75CR2 + 0.45WL1
COMBO 73 1DL + 1AL + 0.75CR1 + 0.45WL2
COMBO 74 1DL + 1AL + 0.75CR2 + 0.45WL2
COMBO 75 1DL + 1AL + 0.75CR1 + 0.45WL3
COMBO 76 1DL + 1AL + 0.75CR2 + 0.45WL3
COMBO 77 1DL + 1AL + 0.75CR1 + 0.45WL4
COMBO 78 1DL + 1AL + 0.75CR2 + 0.45WL4
COMBO 79 1DL + 1AL + 0.75CR1 + 0.45WL5
COMBO 80 1DL + 1AL + 0.75CR2 + 0.45WL5
COMBO 81 1DL + 1AL + 0.75CR1 + 0.45WL6
COMBO 82 1DL + 1AL + 0.75CR2 + 0.45WL6
COMBO 83 1DL + 1AL + 0.75FL + 0.75CR1 + 0.45WL1

12
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description LOAD COMBINATIONS
Checked By JCT
COMBO 84 1DL + 1AL + 0.75FL + 0.75CR2 + 0.45WL1
COMBO 85 1DL + 1AL + 0.75FL + 0.75CR1 + 0.45WL2
COMBO 86 1DL + 1AL + 0.75FL + 0.75CR2 + 0.45WL2
COMBO 87 1DL + 1AL + 0.75FL + 0.75CR1 + 0.45WL3
COMBO 88 1DL + 1AL + 0.75FL + 0.75CR2 + 0.45WL3
COMBO 89 1DL + 1AL + 0.75FL + 0.75CR1 + 0.45WL4
COMBO 90 1DL + 1AL + 0.75FL + 0.75CR2 + 0.45WL4
COMBO 91 1DL + 1AL + 0.75FL + 0.75CR1 + 0.45WL5
COMBO 92 1DL + 1AL + 0.75FL + 0.75CR2 + 0.45WL5
COMBO 93 1DL + 1AL + 0.75FL + 0.75CR1 + 0.45WL6
COMBO 94 1DL + 1AL + 0.75FL + 0.75CR2 + 0.45WL6
COMBO 95 1DL + 1AL + 0.525EL1 + 0.75CR1
COMBO 96 1DL + 1AL + 0.525EL1 + 0.75CR2
COMBO 97 1DL + 1AL + 0.525EL2 + 0.75CR1
COMBO 98 1DL + 1AL + 0.525EL2 + 0.75CR2
COMBO 99 1DL + 1AL + 0.75FL + 0.525EL1
COMBO 100 1DL + 1AL + 0.75FL + 0.525EL2
COMBO 101 1DL + 1AL + 0.525EL1 + 0.75FL + 0.75CR1
COMBO 102 1DL + 1AL + 0.525EL1 + 0.75FL + 0.75CR2
COMBO 103 1DL + 1AL + 0.525EL2 + 0.75FL + 0.75CR1
COMBO 104 1DL + 1AL + 0.525EL2 + 0.75FL + 0.75CR2
COMBO 105 0.6DL + 0.6AL + 0.6WL1
COMBO 106 0.6DL + 0.6AL + 0.6WL2
COMBO 107 0.6DL + 0.6AL + 0.6WL3
COMBO 108 0.6DL + 0.6AL + 0.6WL4
COMBO 109 0.6DL + 0.6AL + 0.6WL5
COMBO 110 0.6DL + 0.6AL + 0.6WL6
COMBO 111 0.6DL + 0.6AL + 0.7EL1
COMBO 112 0.6DL + 0.6AL + 0.7EL2

13
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT Designed by LHD
Description LOAD APPLICATIONS FROM GL.1 TO GL.4 Checked by JCT

I. INPUT DATA

1. Factory Enclosed Buildings

Gable Roofs 1
Occupancy category II
Total length of factory LF = 35 m 2
2. Interior frame
Height of column (Eave height) H= 5.8 m
Bay spacing (Interior) B= 5 m
Span L= 15 m
Slope i= 20.27 % 11.46

3. Endwall frame
Bay spacing (endwall) Be = 5m
Bay spacing of endwall frame Lm = 5m
End spacing of endwall frame Le = 5m

4. Topographic
Exposure C
Wind speed 290 km/h

5. Load
Dead load pDL = 0.15 kN/m²
Collateral load pAL = 0.10 kN/m²
Live load pLLr = 0.60 kN/m²

-------------------------------------------------------------------------------------------------------------------------
Minimum Design Loads for Buildings and Others Structures (ASCE 7-10) 14
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT Designed by LHD
Description LOAD APPLICATIONS FROM GL.1 TO GL.4 Checked by JCT

II. RESULT
1. Dead load
Dead load applies on frame qDL = 0.75 kN/m
Collateral load applies on frame qAL = 0.50 kN/m

2. Live load
Live load applies on frame qLLr = 3.00 kN/m

3. Wind load
a. Wind load applies on frame - axis X

Interior Frame Wind load (kN/m)

Case
W1 W2 W3 W4
Case 01 4.256 -13.418 -9.213 -8.178
Case 02 9.809 -7.866 -3.661 -2.626

End Frame Wind load (kN/m)

Case
W1E W2E W3E W4E
Case 01 3.947 -9.639 -6.006 -5.401
Case 02 6.723 -6.863 -3.230 -2.625

b. Wind load applies on frame - axis Y

-------------------------------------------------------------------------------------------------------------------------
Minimum Design Loads for Buildings and Others Structures (ASCE 7-10) 15
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT Designed by LHD
Description LOAD APPLICATIONS FROM GL.1 TO GL.4 Checked by JCT

Frame Wind load (kN/m)

W5 W5E W6 W6E
Endwall frame
8.945 6.092 -7.249 -4.704
W1E W2E W3E W4E
Endwall frame, sidewind
-5.090 -9.639 -5.475 -5.090
W1 W2 W3 W4
Iinterior frame, sidewind
-9.716 -13.418 -8.483 -9.716

c. Wind load apply to roof panel and accessory

Wind load (kN/m²)

Frame Case
W1 W2F W2E W3
Roof Panel Case 01 -3.346 -4.330 -4.330 -6.812

d. Wind load apply to sidewall panel and accessory

Wind load (kN/m²)

Frame Case
W4 W5
Sidewall Case 01 -3.443 -3.827
Endwall Case 01 -3.443 -3.827

-------------------------------------------------------------------------------------------------------------------------
Minimum Design Loads for Buildings and Others Structures (ASCE 7-10) 16
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT Designed by LHD
Description LOAD APPLICATIONS GL.5 TO GL.9 Checked by JCT

I. INPUT DATA

1. Factory Enclosed Buildings

Gable Roofs 1
Occupancy category II
Total length of factory LF = 35 m 2
2. Interior frame
Height of column (Eave height) H= 8.9 m
Bay spacing (Interior) B= 5.95 m
Span L= 15.3 m
Slope i= 20.1 % 11.37

3. Endwall frame
Bay spacing (endwall) Be = 6.5 m
Bay spacing of endwall frame Lm = 5m
End spacing of endwall frame Le = 5m

4. Topographic
Exposure C
Wind speed 290 km/h

5. Load
Dead load pDL = 0.15 kN/m²
Collateral load pAL = 0.00 kN/m²
Live load pLLr = 0.60 kN/m²

-------------------------------------------------------------------------------------------------------------------------
Minimum Design Loads for Buildings and Others Structures (ASCE 7-10) 17
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT Designed by LHD
Description LOAD APPLICATIONS GL.5 TO GL.9 Checked by JCT

II. RESULT
1. Dead load
Dead load applies on frame qDL = 0.89 kN/m
Collateral load applies on frame qAL = 0.00 kN/m

2. Live load
Live load applies on frame qLLr = 3.57 kN/m

3. Wind load
a. Wind load applies on frame - axis X

Interior Frame Wind load (kN/m)

Case
W1 W2 W3 W4
Case 01 5.486 -17.345 -11.896 -10.555
Case 02 12.663 -10.168 -4.719 -3.378

End Frame Wind load (kN/m)

Case
W1E W2E W3E W4E
Case 01 5.411 -13.371 -8.356 -7.505
Case 02 9.331 -9.450 -4.436 -3.585

b. Wind load applies on frame - axis Y

-------------------------------------------------------------------------------------------------------------------------
Minimum Design Loads for Buildings and Others Structures (ASCE 7-10) 18
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT Designed by LHD
Description LOAD APPLICATIONS GL.5 TO GL.9 Checked by JCT

Frame Wind load (kN/m)

W5 W5E W6 W6E
Endwall frame
9.717 6.618 -7.874 -5.110
W1E W2E W3E W4E
Endwall frame, sidewind
-7.168 -13.371 -7.630 -7.168
W1 W2 W3 W4
Iinterior frame, sidewind
-12.560 -17.345 -10.965 -12.560

c. Wind load apply to roof panel and accessory

Wind load (kN/m²)

Frame Case
W1 W2F W2E W3
Roof Panel Case 01 -3.284 -4.624 -4.624 -7.305

d. Wind load apply to sidewall panel and accessory

Wind load (kN/m²)

Frame Case
W4 W5
Sidewall Case 01 -3.651 -3.979
Endwall Case 01 -3.741 -4.157

-------------------------------------------------------------------------------------------------------------------------
Minimum Design Loads for Buildings and Others Structures (ASCE 7-10) 19
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT Designed by LHD
Description CRANE LOAD Checked by JCT

I. INPUT DATA
Span of Crane Beam
L1 = 6.50 m L2 = 5.40 m

Number of Crane Beam 1

L1 L2
Description Symbol Unit Crane 1 Crane 2 Crane 3
Capacity of crane RC Ton 3 10 15
Span of crane A m 13.72 18.29 10.67
Bridge weight CW Ton 2.51 6.79 4.94
Hoist and trolley weight HT Ton 0.4 1.0 2.6
Service classification (CMAA) B C C
Method of Operation Pendant Pendant Pendant
Number of cycles of crane load 250,000 500,000 500,000
Number of end-truck wheel NWb 2 2 2
Distance between cranes Lcr m 0 0
End-truck length N m 2.184 0 0
Distance Wheelbase W m 1.829 0 0
M m
N
m
m

II. CRANE LOADS

1.Crane Wheel Load
Crane 1 Crane 2 Crane 3
Maximum vertical wheel load WLmax = kN 23.10 0.00 0.00
Minimum vertical wheel load WLmin = kN 6.27 0.00 0.00
Side thrust in each end-truck wheel T1 = kN 3.37 0.00 0.00
Tractive force T2 = kN 2.31 0.00 0.00
Vertical impact I 1.10 0.00 0.00
2.Loading for Building Columns 5.5 0.0 0.0 2.8

Vertical load on column near trolley Dmax = 38.52 kN

Vertical load on column away from trolley Dmin = 10.78 kN
Crane lateral load on building columns Tmax = 5.55 kN
Crane longitudinal load on building columns T= 4.62 kN

20
Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K2
Checked By JCT

DESIGN FRAME K2

TYPICAL MODEL FOR SHOWING DESIGN

Label joints

Label frames

21
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K2
Checked By JCT

Section frames
TABLE: Frame Section Properties 01 - General
SectionName Material Shape t3 t2 tf tw t2b tfb
Text Text Text m m m m m m
C1 ST 3450 I/Wide Flange 0.228 0.164 0.008 0.005 0.164 0.008
B3 ST 2350 I/Wide Flange 0.2 0.1 0.008 0.0055 0.1 0.008
R2 ST 3450 I/Wide Flange 0.384 0.164 0.006 0.005 0.164 0.006

TABLE: Material Properties

Material Fy Fu
Text KN/m2 KN/m2
STEEL2350 235000 400000
STEEL3450 345000 448000

22
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K2
Checked By JCT

THE LOAD FRAME (Unit: kN, m)

1. DL

2. AL

3. LL

23
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K2
Checked By JCT
4. WL
a. WL1

b. WL2

c. WL3

24
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K2
Checked By JCT
d. WL4

e. WL5

f. WL6

25
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K2
Checked By JCT
5. EL
a. EL1

b. EL2

26
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K2
Checked By JCT

MEMBER FORCE/ STRESS DIAGRAM FOR FRAME

1. THE MOMENT OF THE FRAME (Unit: kN.m)

1.1. DL

1.2. AL

1.3. LL

27
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K2
Checked By JCT
1.4. WL
a. WL1

b. WL2

c. WL3

28
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K2
Checked By JCT
d. WL4

e. WL5

f. WL6

29
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K2
Checked By JCT
1.5. EL
a. EL1

b. EL2

30
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K2
Checked By JCT

2. THE AXIAL FORCE OF THE FRAME (Unit: kN)

2.1. DL

2.2. AL

2.3. LL

31
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K2
Checked By JCT
2.4. WL
a. WL1

b. WL2

c. WL3

32
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K2
Checked By JCT
d. WL4

e. WL5

f. WL6

33
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K2
Checked By JCT
2.5. EL
a. EL1

b. EL2

34
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K2
Checked By JCT

3. THE SHEAR OF THE FRAME (Unit: kN)

3.1. DL

3.2. AL

3.3. LL

35
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K2
Checked By JCT
3.4. WL
a. WL1

b. WL2

c. WL3

36
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K2
Checked By JCT
d. WL4

e. WL5

f. WL6

37
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K2
Checked By JCT
3.5. EL
a. EL1

b. EL2

38
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K2
Checked By JCT

DEFLECTION CHECKING

1. VERTICAL DEFLECTION LIMITS

1.1. LL

Ymax = L/240 = 15/240 = 0.0625 m > 0.0499 m → Ok

1.2. DL + +AL + LL

Ymax = L/180 = 15/180 = 0.0833 m > 0.07741m → Ok

39
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K2
Checked By JCT

2. HORIZONTAL DEFLECTION LIMITS: 1DL+ 1AL + 0.4224WL

Xmax = H/60 = 5.8/60 = 0.0967 > 0.00926m → Ok

40
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K2
Checked By JCT

STRESS CHECK FORCES & MOMENTS

Demand/capacity ratio
TABLE: Steel Design 1 - Summary Data - AISC 360-10
Frame DesignSect DesignType Status Ratio RatioType Combo Location
Text Text Text Text Unitless Text Text m
127 C1 Column No Messages 0.432 PMM COMBO 109 0.50
139 C1 Column No Messages 0.423 PMM COMBO 110 0.50
773 B3 Brace No Messages 0.358 PMM COMBO 106 1.37
774 R2 Brace No Messages 0.836 PMM COMBO 105 5.07
776 EX1 Brace No Messages 0.358 PMM COMBO 108 1.37
777 R2 Brace No Messages 0.836 PMM COMBO 107 5.07

41
Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT

DESIGN FRAME K5

TYPICAL MODEL FOR SHOWING DESIGN

Label joints

Label frames

42
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT

Section frames
TABLE: Frame Section Properties 01 - General
SectionName Material Shape t3 t2 tf tw t2b tfb
Text Text Text m m m m m m
B1 ST 3450 I/Wide Flange 0.224 0.148 0.006 0.004 0.148 0.006
C2 Nonprismatic
C2_1 ST 3450 I/Wide Flange 0.3 0.184 0.008 0.006 0.184 0.008
C2_2 ST 3450 I/Wide Flange 0.6 0.184 0.008 0.006 0.184 0.008
NG ST 2350 I/Wide Flange 0.15 0.075 0.007 0.005 0.075 0.007
R3 Nonprismatic
R3_1 ST 3450 I/Wide Flange 0.6 0.184 0.008 0.006 0.184 0.008
R3_2 ST 3450 I/Wide Flange 0.35 0.184 0.008 0.006 0.184 0.008

TABLE: Material Properties

Material Fy Fu
Text KN/m2 KN/m2
STEEL2350 235000 400000
STEEL3450 345000 448000

43
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT

THE LOAD FRAME (Unit: kN, m)

1. DL

2. LL

44
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT
3. WL
a. WL1

b. WL2

45
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT
c. WL3

d. WL4

46
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT
e. WL5

f. WL6

47
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT
4. FL

5. CR
a. CR1

48
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT
b. CR2

49
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT
6. EL
a. EL1

b. EL2

50
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT

MEMBER FORCE/ STRESS DIAGRAM FOR FRAME

1. THE MOMENT OF THE FRAME (Unit: kN.m)

1.1. DL

1.2. LL

51
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT
1.3. WL
a. WL1

b. WL2

52
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT
c. WL3

d. WL4

53
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT
e. WL5

f. WL6

54
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT
1.4. FL

1.5. CR
a. CR1

55
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT
b. CR2

1.6. EL
a. EL1

56
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT
b. EL2

57
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT

2. THE AXIAL FORCE OF THE FRAME (Unit: kN)

2.1. DL

2.2. LL

58
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT
2.3. WL
a. WL1

b. WL2

59
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT
c. WL3

d. WL4

60
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT
e. WL5

f. WL6

61
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT
2.4. FL

2.5. CR
a. CR1

62
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT
b. CR2

2.6. EL
a. EL1

63
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT
b. EL2

64
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT

3. THE SHEAR OF THE FRAME (Unit: kN)

3.1. DL

3.2. LL

65
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT
3.3. WL
a. WL1

b. WL2

66
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT
c. WL3

d. WL4

67
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT
e. WL5

f. WL6

68
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT
3.4. FL

3.5. CR
a. CR1

69
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT
b. CR2

3.6. EL
a. EL1

70
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT
b. EL2

71
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT

DEFLECTION CHECKING

1. VERTICAL DEFLECTION LIMITS

1.1. LL

Ymax = L/180 = 15.3/180 = 0.085 m > 0.02613 m → Ok

1.2. DL + LL

Ymax = L/120 = 15.3/120 = 0.1275 m > 0.03739 m → Ok

72
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT

2. HORIZONTAL DEFLECTION LIMITS: 1DL+0.4224WL

Xmax = H/60 = 8.9/60 = 0.148 > 0.0193 m → Ok

3. FLOOR MEMBERS DEFLECTION: DL + FL

Ymax = L/240 = 2.2/240 = 0.009 m > 0.00375 m → Ok

73
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT
4. BARE FRAME DEFLECTION LIMITS: DL + CR

Xmax = H/100 = 7.2/100 = 0.072m > 0.00606 m → Ok

74
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021
Designed By LHD
Description DESIGN FRAME K5
Checked By JCT

STRESS CHECK FORCES & MOMENTS

Demand/capacity ratio
TABLE: Steel Design 1 - Summary Data - AISC 360-10
Frame DesignSect DesignType Status Ratio RatioType Combo Location
Text Text Text Text Unitless Text Text m
44 VC Beam No Messages 0.178 PMM COMBO 12 0.65
45 VC Beam No Messages 0.177 PMM COMBO 13 0.65
215 B1 Column No Messages 0.246 PMM COMBO 111 0.85
223 B1 Column No Messages 0.120 PMM COMBO 102 0.48
226 B1 Beam No Messages 0.168 PMM COMBO 101 1.10
808 NG Brace No Messages 0.366 PMM COMBO 27 1.57
809 NG Column No Messages 0.793 PMM COMBO 105 0.00
810 NG Column No Messages 0.812 PMM COMBO 107 0.00
812 C2 Column No Messages 0.757 PMM COMBO 105 5.40
818 C2 Column No Messages 0.755 PMM COMBO 107 5.40
819 R3 Brace No Messages 0.720 PMM COMBO 105 0.30
820 R3 Brace No Messages 0.730 PMM COMBO 107 0.30
821 NG Brace No Messages 0.366 PMM COMBO 27 1.57

75
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT Designed by LHD
Description DESIGN PURLIN FROM GL.1 TO GL.4 Checked by JCT

I. PURLIN

End bay purlin 1 Z175x50x56x20x1.8

Second bay purlin Z175x50x56x20x1.8
Middle bay purlin Z175x50x56x20x1.8
End bay purlin 2 Z175x50x56x20x1.8
Yeild strength of purlin Fy = 450 MPa
Elastic modulus E= 200000 MPa
Distance of purlins in area 1 - 2 @= 1.00 m
Distance of purlins in area 2 - 3 @= 0.80 m
Over lap bay purlin C= 10 % B 2
Define width of pressure coefficient zones a 1.50 m 2
Type of bridging: 1 row of bridging in end and interior spans
II. PERFORMANCE OF SECTION
1. End bay purlin
Type of A Ix Iy Sx Sy Q'ty Ixe Sxe
purlin (cm2) (cm4) (cm4) (cm3) (cm3) (kN/m) (cm4) (cm3)
Z175x1.8 5.78 257.10 34.28 28.84 6.38 0.042 235.20 26.88

Type of A Ix Iy Sx Sy Q'ty Ixe Sxe

purlin (cm )
2
(cm )
4
(cm )
4 3
(cm )
3
(cm ) (kN/m) (cm )
4 3
(cm )
Z175x1.8 5.78 257.10 34.28 28.84 6.38 0.042 235.20 26.88

2. Second bay purlin

Type of A Ix Iy Sx Sy Q'ty Ixe Sxe
purlin (cm2) (cm4) (cm4) (cm3) (cm3) (kN/m) (cm4) (cm3)
Z175x1.8 5.78 257.10 34.28 28.84 6.38 0.042 235.20 26.88

76
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT Designed by LHD
Description DESIGN PURLIN FROM GL.1 TO GL.4 Checked by JCT

3. Middle bay purlin

Type of A Ix Iy Sx Sy Q'ty Ixe Sxe
purlin (cm ) 2
(cm ) 4
(cm ) 4 3
(cm ) 3
(cm ) (kN/m) (cm ) 4
(cm3)
Z175x1.8 5.78 257.10 34.28 28.84 6.38 0.042 235.20 26.88

III. LOAD AND INTERNAL FORCE

1. Load
Dead load pDL = 0.15 kN/m²
Collateral load pAL = 0.10 kN/m²
Live load roof pLLr = 0.60 kN/m²
Wind load WL1 = -3.35 kN/m²
WL2E = -3.64 kN/m²
WL2F = -4.33 kN/m²
WL3 = -5.07 kN/m²
2.Combining Nominal Load
TH 1 DL + AL + LLr = 0.833 kN/m
0.6 DL + 0.6 AL + 0.6 WL1 = -1.861 kN/m
TH 2
0.6 DL + 0.6 AL + 0.6 WL2E = -2.038 kN/m
0.6 DL + 0.6 AL + 0.6 WL2F = -1.961 kN/m
TH 3
0.6 DL + 0.6 AL + 0.6 WL3 = -2.318 kN/m
3. Internal force for calculating
a. Moment (kNm)

Internal 1
Position of Purlin TH 1 TH 2 TH 3
force
Support 2.34 5.54 6.15 6.15
End bay 1 Lap 1.73 4.06 4.47 4.47 1
Span 1.56 3.90 4.49 4.49
Support 2.34 5.54 6.15 6.15
Lap-Left 1.81 4.34 4.87 4.87 1
Second bay
Lap-Right 1.28 2.82 2.92 2.92
Span 0.73 1.55 1.55 1.55
Support 1.85 4.16 4.41 4.41
Lap-Left 1.27 2.79 2.88 2.88 1
Middle bay
Lap-Right 1.36 3.05 3.24 3.24
Span 0.85 1.92 2.06 2.06
Support 1.99 4.67 5.15 5.15
End bay 2 Lap 1.50 3.50 3.82 3.82 1
Span 1.14 2.87 3.33 3.33

77
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT Designed by LHD
Description DESIGN PURLIN FROM GL.1 TO GL.4 Checked by JCT

b. Shear (kN)

Internal
Position of Purlin TH 1 TH 2 TH 3
force
Support 2.22 5.04 5.39 5.39
End bay 1
Lap 2.34 5.69 6.45 6.45
Support 2.28 5.54 6.27 6.27
Second bay
Lap 2.01 4.57 4.90 4.90
Support 2.09 4.69 4.96 4.96
Middle bay
Lap 1.91 4.29 4.55 4.55
Support 2.28 5.54 6.27 6.27
End bay 2
Lap 2.10 5.10 5.76 5.76

IV. CALCULATING
1. Yeild strength for calculating of purlin
End bay purlin 1 Fy = 450.00 MPa
Second purlin Fy = 450.00 MPa
Middle bay purlin Fy = 450.00 MPa
End bay purlin 2 Fy = 450.00 MPa
2. Checking flexural capacity of purlin
Mn RFy Sxe
 M (Eq. D6.1.2)
b b
End bay purlin 1 Z175x50x56x20x1.8 OK 0.730
Second purlin Z175x50x56x20x1.8 OK 0.672
Middle bay purlin Z175x50x56x20x1.8 OK 0.447
End bay purlin 2 Z175x50x56x20x1.8 OK 0.541

3. Checking shear capacity of purlin

Vn A F
 w v V (Eq. C3.2.1)
v v
End bay purlin 1 Z175x50x56x20x1.8 OK 0.296
Second purlin Z175x50x56x20x1.8 OK 0.225
Middle bay purlin Z175x50x56x20x1.8 OK 0.209
End bay purlin 2 Z175x50x56x20x1.8 OK 0.264

78
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT Designed by LHD
Description DESIGN PURLIN FROM GL.1 TO GL.4 Checked by JCT

4. Checking combined bending and shear capacity of purlin

2 2
 b M   vV  (Eq. C3.3.1)
    1
 Mnxo   Vn 
End bay purlin 1 Z175x50x56x20x1.8 OK 0.626
Second purlin Z175x50x56x20x1.8 OK 0.708
Middle bay purlin Z175x50x56x20x1.8 OK 0.493
End bay purlin 2 Z175x50x56x20x1.8 OK 0.590

5. Checking web crippling strength

Pn  R  N  h (Eq. C3.4.1)
 Ct 2 Fy sin  1  CR   1  CN   1  Ch P
w  t  t  t 

End bay purlin 1 Z175x50x56x20x1.8 OK 0.696
Second purlin Z175x50x56x20x1.8 OK 0.681
Middle bay purlin Z175x50x56x20x1.8 OK 0.427
End bay purlin 2 Z175x50x56x20x1.8 OK 0.599

6. Checking combined bending and web crippling

 P   M  1.65
0.86    (Eq. C3.5.1)
 Pn   Mnxo  
At first interior support
Z175x50x56x20x1.8 OK 0.865
Z175x50x56x20x1.8 OK 0.823
At center suppor
Z175x50x56x20x1.8 OK 0.566

7. Checking deflection

Span 1 2 3 4 5 6 7
Deflection (mm) 12.70 1.23 4.41 3.22 4.01 2.43 7.04
Allowed deflection L/150
33.33 33.33 33.33 33.33 33.33 33.33 29.33
(mm)
Check OK OK OK OK OK OK OK

79
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT Designed by LHD
Description DESIGN PURLIN GL.5 TO GL.9 Checked by JCT

I. PURLIN

End bay purlin 1 Z175x50x56x20x2.3

Second bay purlin Z175x50x56x20x2.3
Middle bay purlin Z175x50x56x20x1.8
End bay purlin 2 Z175x50x56x20x2.3
Yeild strength of purlin Fy = 450 MPa
Elastic modulus E= 200000 MPa
Distance of purlins in area 1 - 2 @= 1.00 m
Distance of purlins in area 2 - 3 @= 0.70 m
Over lap bay purlin C= 10 % B 2
Define width of pressure coefficient zones a 1.53 m 2
Type of bridging: 1 row of bridging in end and interior spans
II. PERFORMANCE OF SECTION
1. End bay purlin
Type of A Ix Iy Sx Sy Q'ty Ixe Sxe
purlin (cm2) (cm4) (cm4) (cm3) (cm3) (kN/m) (cm4) (cm3)
Z175x2.3 7.38 324.10 42.48 36.35 7.94 0.053 295.80 33.79

Type of A Ix Iy Sx Sy Q'ty Ixe Sxe

purlin (cm )
2
(cm )
4
(cm )
4 3
(cm )
3
(cm ) (kN/m) (cm )
4 3
(cm )
Z175x2.3 7.38 324.10 42.48 36.35 7.94 0.053 295.80 33.79

2. Second bay purlin

Type of A Ix Iy Sx Sy Q'ty Ixe Sxe
purlin (cm2) (cm4) (cm4) (cm3) (cm3) (kN/m) (cm4) (cm3)
Z175x2.3 7.38 324.10 42.48 36.35 7.94 0.053 295.80 33.79

80
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT Designed by LHD
Description DESIGN PURLIN GL.5 TO GL.9 Checked by JCT

3. Middle bay purlin

Type of A Ix Iy Sx Sy Q'ty Ixe Sxe
purlin (cm ) 2
(cm ) 4
(cm ) 4 3
(cm ) 3
(cm ) (kN/m) (cm ) 4
(cm3)
Z175x1.8 5.78 257.10 34.28 28.84 6.38 0.042 235.20 26.88

III. LOAD AND INTERNAL FORCE

1. Load
Dead load pDL = 0.15 kN/m²
Collateral load pAL = 0.00 kN/m²
Live load roof pLLr = 0.60 kN/m²
Wind load WL1 = -3.28 kN/m²
WL2E = -3.60 kN/m²
WL2F = -4.62 kN/m²
WL3 = -5.26 kN/m²
2.Combining Nominal Load
TH 1 DL + AL + LLr = 0.735 kN/m
0.6 DL + 0.6 AL + 0.6 WL1 = -1.882 kN/m
TH 2
0.6 DL + 0.6 AL + 0.6 WL2E = -2.071 kN/m
0.6 DL + 0.6 AL + 0.6 WL2F = -1.880 kN/m
TH 3
0.6 DL + 0.6 AL + 0.6 WL3 = -2.145 kN/m
3. Internal force for calculating
a. Moment (kNm)

Internal 1
Position of Purlin TH 1 TH 2 TH 3
force
Support 3.20 8.81 9.05 9.05
End bay 1 Lap 2.30 6.29 6.45 6.45 1
Span 2.45 6.97 7.25 7.25
Support 3.20 8.81 9.05 9.05
Lap-Left 2.61 7.25 7.48 7.48 1
Second bay
Lap-Right 1.43 3.65 3.64 3.65
Span 0.94 2.35 2.33 2.35
Support 1.97 5.10 5.11 5.11
Lap-Left 1.45 3.68 3.67 3.68 1
Middle bay
Lap-Right 1.46 3.77 3.78 3.78
Span 0.94 2.46 2.48 2.48
Support 1.53 4.04 4.08 4.08
End bay 2 Lap 1.27 3.30 3.32 3.32 1
Span 0.38 1.16 1.24 1.24

81
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT Designed by LHD
Description DESIGN PURLIN GL.5 TO GL.9 Checked by JCT

b. Shear (kN)

Internal
Position of Purlin TH 1 TH 2 TH 3
force
Support 2.30 6.02 6.07 6.07
End bay 1
Lap 2.64 7.41 7.67 7.67
Support 2.30 6.02 6.07 6.07
Second bay
Lap 2.10 5.51 5.57 5.57
Support 2.07 5.26 5.25 5.26
Middle bay
Lap 1.87 4.83 4.84 4.84
Support 1.68 4.64 4.78 4.78
End bay 2
Lap 1.56 4.30 4.42 4.42

IV. CALCULATING
1. Yeild strength for calculating of purlin
End bay purlin 1 Fy = 450.00 MPa
Second purlin Fy = 450.00 MPa
Middle bay purlin Fy = 450.00 MPa
End bay purlin 2 Fy = 450.00 MPa
2. Checking flexural capacity of purlin
Mn RFy Sxe
 M (Eq. D6.1.2)
b b
End bay purlin 1 Z175x50x56x20x2.3 OK 0.937
Second purlin Z175x50x56x20x2.3 OK 0.822
Middle bay purlin Z175x50x56x20x1.8 OK 0.523
End bay purlin 2 Z175x50x56x20x2.3 OK 0.364

3. Checking shear capacity of purlin

Vn A F
 w v V (Eq. C3.2.1)
v v
End bay purlin 1 Z175x50x56x20x2.3 OK 0.176
Second purlin Z175x50x56x20x2.3 OK 0.128
Middle bay purlin Z175x50x56x20x1.8 OK 0.222
End bay purlin 2 Z175x50x56x20x2.3 OK 0.102

82
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT Designed by LHD
Description DESIGN PURLIN GL.5 TO GL.9 Checked by JCT

4. Checking combined bending and shear capacity of purlin

2 2
 b M   vV  (Eq. C3.3.1)
    1
 Mnxo   Vn 
End bay purlin 1 Z175x50x56x20x2.3 OK 0.711
Second purlin Z175x50x56x20x2.3 OK 0.832
Middle bay purlin Z175x50x56x20x1.8 OK 0.568
End bay purlin 2 Z175x50x56x20x2.3 OK 0.378

5. Checking web crippling strength

Pn  R  N  h (Eq. C3.4.1)
 Ct 2Fy sin  1  CR   1  CN   1  Ch P
w  t  t  t 

End bay purlin 1 Z175x50x56x20x2.3 OK 0.535
Second purlin Z175x50x56x20x2.3 OK 0.483
Middle bay purlin Z175x50x56x20x1.8 OK 0.451
End bay purlin 2 Z175x50x56x20x2.3 OK 0.221

6. Checking combined bending and web crippling

 P   M  1.65
0.86    (Eq. C3.5.1)
 Pn   Mnxo  
At first interior support
Z175x50x56x20x2.3 OK 0.735
Z175x50x56x20x2.3 OK 0.566
At center suppor
Z175x50x56x20x1.8 OK 0.617

7. Checking deflection

Span 1 2 3 4 5 6 7
Deflection (mm) 28.39 -1.57 6.63 4.25 4.54 4.72 0.75
Allowed deflection L/150
43.33 36.00 36.00 36.00 36.00 36.00 22.00
(mm)
Check OK OK OK OK OK OK OK

83
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT
Designed by LHD
Description DESIGN GIRT SIDE WALL Checked by JCT

I. GIRT

End bay purlin 1 Z175x50x56x20x2.3

Second bay purlin Z175x50x56x20x2.3
Middle bay purlin Z175x50x56x20x2.3
End bay purlin 2 Z175x50x56x20x2.3
Yeild strength of purlin Fy = 450 MPa
Elastic modulus E= 200000 MPa
Distance of purlins @= 1.00 m
Over lap bay purlin C= 10 % B 3
Define width of pressure coefficient zones a 1.53 m 2
Type of bridging: 2 rows of bridging in end and 1 row in interior spans

II. PERFORMANCE OF SECTION

Type of A Ix Iy Sx Sy Q'ty Ixe Sxe
2
(cm4)
4 3 3 4
purlin (cm ) (cm ) (cm ) (cm ) (kN/m) (cm ) (cm3)
Z175x2.3 7.38 324.10 42.48 36.35 7.94 0.05 295.80 33.79

2. Second bay purlin

Type of A Ix Iy Sx Sy Q'ty Ixe Sxe
purlin 2 4 4 3 3 4 3
(cm ) (cm ) (cm ) (cm ) (cm ) (kN/m) (cm ) (cm )
Z175x2.3 7.38 324.10 42.48 36.35 7.94 0.05 326.31 40.59

3. Middle bay purlin

Type of A Ix Iy Sx Sy Q'ty Ixe Sxe
purlin (cm2) (cm ) 4
(cm ) 4 3
(cm ) 3
(cm ) (kN/m) (cm ) 4
(cm3)
Z175x2.3 7.38 324.10 42.48 36.35 7.94 0.05 326.31 40.59

84
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT
Designed by LHD
Description DESIGN GIRT SIDE WALL Checked by JCT

4. End bay purlin 2

Type of A Ix Iy Sx Sy Q'ty Ixe Sxe
purlin 2 4 4 3 3 4 3
(cm ) (cm ) (cm ) (cm ) (cm ) (kN/m) (cm ) (cm )
Z175x2.3 7.38 324.10 42.48 36.35 7.94 0.05 295.80 33.79

III. LOAD AND INTERNAL FORCE

1. Load
Dead load pDL = 0.15 kN/m²
Wind load WL4 = -3.74 kN/m²
WL5 = -4.16 kN/m²
3. Internal force for calculating
a. Moment (kNm)

1
Position of Purlin Dead load Wind load

Support 0.16 4.82

End bay 1 Lap 0.11 7.59 1
Span 0.10 8.39
Support 0.21 10.63
Lap-Left 0.14 8.75 1
Second bay
Lap-Right 0.12 4.37
Span 0.07 2.79
Support 0.20 6.13
Middle bay Lap-Left 0.11 4.41 1
Span 0.09 3.01
Support 0.21 10.63
End bay 2 Lap 0.12 7.59 1
Span 0.12 8.39
b. Shear (kN)

Position of Purlin Dead load Wind load

Support 0.24 5.84

End bay 1
Lap 0.25 5.16
Support 0.31 9.74
Second bay
Lap 0.25 6.63
Support 0.29 6.40
Middle bay
Lap 0.25 5.80
Support 0.31 9.74
End bay 2
Lap 0.27 8.93
Second purlin Fy = 450.00 MPa
Middle bay purlin Fy = 450.00 MPa
End bay purlin 2 Fy = 450.00 MPa

85
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT
Designed by LHD
Description DESIGN GIRT SIDE WALL Checked by JCT

2. Checking flexural capacity of purlin

Mn RFy Sxe
 M (Eq. D6.1.2)
b b

End bay purlin 1 Z175x50x56x20x2.3 OK 0.970

Second purlin Z175x50x56x20x2.3 OK 0.800
Middle bay purlin Z175x50x56x20x2.3 OK 0.416
End bay purlin 2 Z175x50x56x20x2.3 OK 0.970

3. Checking shear capacity of purlin

Vn A F
 w v V (Eq. C3.2.1)
v v
End bay purlin 1 Z175x50x56x20x2.3 OK 0.119
Second purlin Z175x50x56x20x2.3 OK 0.152
Middle bay purlin Z175x50x56x20x2.3 OK 0.133
End bay purlin 2 Z175x50x56x20x2.3 OK 0.205

4. Checking combined bending and shear capacity of purlin

2 2
 b M   vV  (Eq. C3.3.1)
    1
 Mnxo   Vn 
End bay purlin 1 Z175x50x56x20x2.3 OK 0.842
Second purlin Z175x50x56x20x2.3 OK 0.815
Middle bay purlin Z175x50x56x20x2.3 OK 0.437
End bay purlin 2 Z175x50x56x20x2.3 OK 0.859

5. Checking web crippling strength

Pn  R  N  h  (Eq. C3.4.1)
 Ct 2 Fy sin  1  CR   1  CN   1  Ch   P
w  t t t
   

6. Checking combined bending and web crippling

 P   M  1.65
0.86      (Eq. C3.5.1)
 Pn   Mnxo  
At first interior support
Z175x50x56x20x2.3 OK 0.652
Z175x50x56x20x2.3 OK 0.831
At center suppor
Z175x50x56x20x2.3 OK 0.460

86
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT
Designed by LHD
Description DESIGN GIRT SIDE WALL Checked by JCT

7. Checking deflection
a. Horizontal
Span 1 2 3 4 5 6 7
Deflection (mm) 0.83 5.69 4.33 4.04 6.51 -4.32 33.12
Allowed deflection L/120
27.50 45.00 45.00 45.00 45.00 45.00 54.17
(mm)
Check OK OK OK OK OK OK OK

b. Vertical
Span 1 2 3 4 5 6 7
Deflection (mm) 0.91 0.11 0.97 0.67 0.82 0.57 1.20
Allowed deflection L/120
27.50 45.00 45.00 45.00 45.00 45.00 54.17
(mm)
Check OK OK OK OK OK OK OK

87
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT Designed by LHD
Description DESIGN EAVE STRUT Checked by JCT

I. EAVE STRUT

Eave Strut Z175x62x68x20x2.3

Yeild strength of eave strut Fy = 450 MPa
Elastic modulus E= 200000 MPa
Distance of eave struts @= 0.70 m
Length of eave strut L= 6.50 m
Number of girt n= 6 2
Type of bridging: 1 row of bridging in end and interior spans
3
II. PERFORMANCE OF SECTION

Type of A Ix Iy Sx Sy Q'ty Ixe Sxe

eave strut
(cm2) (cm4) (cm4) (cm3) (cm3) (kN/m) (cm4) (cm3)
Z175x2.3 7.94 365.28 72.12 41.02 11.03 0.058 328.24 36.80

III. LOAD AND INTERNAL FORCE

1. Load
Weight of panel ppanel = 0.05 kN/m²
Rain load PR = 0.28 kN/m
Live load roof pLLr = 0.60 kN/m²
Wind load WL = -7.22 kN/m²
2.Combining Nominal Load
DL + LLr = 0.372 kN/m 0.372
DL + PR = 0.441 kN/m 0.441
0.6DL + 0.6WL = -1.271 kN/m 1.271

88
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT Designed by LHD
Description DESIGN EAVE STRUT Checked by JCT

3. Internal force for calculating

a. Moment (kNm)

Position of eave strut Internal force

Support 5.55
Lap 4.00
Span 4.22

b. Shear (kN)
Position of eave strut Internal force

Support 4.98
Lap 4.57

IV. CALCULATING
1. Yeild strength for calculating of eave strut
Eave strut Fy = 450 MPa

2. Checking flexural capacity of eave strut

+ Positive moment: M n RFy S xe (Eq. C3.1.1-1)
  8.43 kNm
b b
Ωb = 1.67
R= 0.85
Hence: Mn ≥ M = 4.22 kNm OK
b
+ Negative moment:
a) Checking flexure capacity at the right lap

Ly  L / 4  Llap / 2  0.975 m

I yc  I y / 2  36.06 cm4

Cb 2 EdI yc
Fe   2970268 kN/m² (Eq. C3.1.2.1-15)
2Sf (K y Ly )2

89
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT Designed by LHD
Description DESIGN EAVE STRUT Checked by JCT

Hence: Fe > 2.78Fy = 1251000 kN/m²

Allowable flexure strength at the right lap
Mn = SeFy = 16.56 kNm (Eq. C3.1.1-1)

Mn
 9.92 kNm
b
Mn ≥ M = 4 kNm OK
b
b) Checking flexure capacity at the right support
2Mn = SeFy = 33.12 kNm
Mn
 19.83 kNm
b
Mn
≥ M = 5.55 kNm OK
b
3. Checking shear capacity of eave strut
a. Determine Fv
+) If h / t  Ekv / Fy
Fv = 0.6Fy (Eq. C3.2.1-2)
+) If Ekv / Fy  h / t  1.51 Ekv / Fy
0.6 Ekv Fy (Eq. C3.2.1-3)
Fv 
h/t
+) If h / t  1.51 Ekv / Fy
 2Ekv (Eq. C3.2.1-4a)
Fv  2

Eave strut 
12 1   2  h / t 
h/t = 69.74
Ekv / Fy  48.72
→ Fv = 188.61 Mpa
b. Shear capacity of eave strut
At the lap
Vn A F
 w v  43.49 kN
(Eq. C3.2.1-1)
v v
Aw = 2
368.92 mm
Ωv = 1.60

90
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT Designed by LHD
Description DESIGN EAVE STRUT Checked by JCT

Hence: Vn
≥ V = 4.57 kNm OK
v

At the support
2Vn
≥ V = 4.98 kNm OK
v

4. Checking combined bending and shear capacity of purlin

At the lap
M= 4.00 kNm
V= 4.57 kN
Mnxo = 7.99 kNm
Ωb = 1.67
Ωv = 1.60
Hence:
2 2
 b M   vV  ≤ 1 OK
     0.842 (Eq.C3.3.1)
 Mnxo   Vn 
At the support
M= 5.55 kNm
V= 4.98 kN
Mnxo = 11.09 kNm
Ωb = 1.67
Ωv = 1.60
Hence:
2 2
 b M   vV  ≤ 1 OK
     0.843 (Eq.C3.3.1)
 Mnxo   Vn 

91
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT Designed by LHD
Description DESIGN EAVE STRUT Checked by JCT

5. Checking web crippling strength

At outside support  R  N  h
Pn  Ct 2 Fy sin  1  CR   1  CN   1  Ch 
 t  t  t 
Where: 
θ= 90 o C= 4
R= 5 mm CR = 0.14
N= 80 mm CN = 0.35 (Table C3.4.1-3)
h= 175 mm Ch = 0.02
t= 2.3 mm ΩW = 1.75
Check limits
R/t = 2.2 ≤ 9 OK
h/t = 76.1 ≤ 200 OK
N/t = 34.8 ≤ 210 OK
N/h = 0.5 ≤ 2 OK
→ Pn1 = Pn2 = 18.27 kN
Pn P  Pn 2
 n1  20.88 kN ≥ 8.97 kN OK
w w
6. Checking combined bending and web crippling
 P   M  1.65
0.86   
 Pn   Mnxo   (Eq.C3.5.1-3)

Ω= 1.7
At first interior support-end bay
Check limits
h/t = 76.09 ≤ 150 OK
N/t = 34.78 ≤ 140 OK
Fy = 450.0 ≤ 492 OK
R/t = 2.17 ≤ 5.5 OK

P   M  0.97 OK
0.86    0.71 ≤
 Pn   Mnxo 
7. Checking deflection

Span L = 6.5 m
Deflection (mm) 20.83
Allowed deflection L/150
43.33
(mm)
Check OK

92
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT Designed by LHD
Description ROD BRACING CALCULATION Checked by JCT

I. INPUT DATA
1. Building Data
Building length L= 35 m
Eave height H= 5.8 m
Slope i= 20.27 % 1 TRUE
Bay spacing B= 8 m
2. Material
Material use the bracing of roof
Specified minimum yield stress Fy = 235 MPa
Ultimate strength Fu = 400 MPa
Material use the bracing of sidewalls
Specified minimum yield stress Fy = 235 MPa
Ultimate strength Fu = 400 MPa
Material use the Eave Bracing
Specified minimum yield stress Fy = 235 MPa
Ultimate strength Fu = 400 MPa
Modulus of elasticity of steel E= 200000 MPa
II. BRACING SYSTEM DESIGN
1. Calculate the bracing Rod/Cable of Roof
The
Tension of Bracing allowable
Location Rod/Cable Diameter tension Conclude
strength
(kN) D (mm) Pt (kN) F
BR1 27.373 Ø20 47.12 OK 2
BR3 1.417 Ø16 30.16 OK 1.6

2. Calculate the bracing Cable/Rod Sidewall

Bracing Force T= 13.802 kN
Diameter of Cable/Rod D= Ø20 mm 2
The nominal tension strength Pn = FntAb = 0.75FuAb = 94.25 kN
The allowable tension strength Pt=Pn/W t=Pn/2 = 47.12 kN > T OK

93
 Job No. PHL.T3.25.21 Item POWERHOUSE Revision 00
Date 11/2021
Project CATAINGAN PROJECT Designed by LHD
Description DESIGN RUNWAY BEAM Checked by JCT

I. INPUT DATA
1. Material
Steel A572 Grade 50
Yield strength of steel Fy = 345 MPa
Modulus of elasticity of steel E= 200000 MPa
2. Section
Section of runway beam
Web
Section Height Compression Flange Tension Flange
thickness
Built-up member d (mm) tw (mm) b1 (mm) tf1 (mm) b2 (mm) tf2 (mm)
I - 388x184x6x8 388 6 184 8 184 8

Factor
Length Length Factor Stiffeners Factor
Lb (mm) L (mm) K @a (mm) Cb
4.5 6500 1 1500 1.001

II. FORCE
Loading for runway beam Crane 1 Crane 2 Crane 3
Maximum vertical wheel load WLmax = kN 25.40 0.00 0.00
100% side thrust in each end-truck wheel max T= kN 3.37 0.00 0.00
Longitudinal force P= kN 4.62 0.00 0.00
Vertical impact I 1.10 0.00 0.00
WLmax
T

Force of runway beam Force of bracing

Axial force Moment Shear force Axial force
P (kN) M33 (kNm) M22 (kNm) V22 (kN) V33 (kN) P (kN)
-4.62 58.76 2.39 43.65 4.912 -10

94
 Job No. PHL.T3.25.21 Item POWERHOUSE Revision 00
Date 11/2021
Project CATAINGAN PROJECT Designed by LHD
Description DESIGN RUNWAY BEAM Checked by JCT

Resultant Moment M33, kNm

Resultant Moment M22, kNm

Resultant Shear V22, kN

Resultant Shear V33, kN

III. CHECK OF MENBERS FOR STRENGTH CAPACITY

1. CHECK OF RUNWAY BEAM FOR STRENGTH CAPACITY
a. Design of runway beam for Flexure
Design of runway beam for flexure - major axis
Mcx = 144.79 kNm
Mcx/No LTB = 144.79 kNm [Chapter F3]
Design of runway beam for flexure - minor axis
Mcy = 25.12 kNm [Chapter F6]
b. Design of runway beam for Compression
Pc = 815.37 kN [Chapter E]
c. Design of runway beam for Shear
Design of runway beam for shear - major axis
Vcx = 275.63 kN [Chapter G2]
Design of runway beam for shear - minor axis
Vcy = 364.91 kN [Chapter G7]
d. Design of runway beam for Combined Forces and Torsion
Design of runway beam for combined flexure and axial force
AXL B-MAJ B-MIN D/C ratio
Pr/2Pc M33/Mcx M22/Mcy H1-1b [Chapter H]
0.003 0.406 0.095 0.504 [Satisfactory]

95
 Job No. PHL.T3.25.21 Item POWERHOUSE Revision 00
Date 11/2021
Project CATAINGAN PROJECT Designed by LHD
Description DESIGN RUNWAY BEAM Checked by JCT

Design of runway beam for Shear

Vr V
 22  0.158 [Satisfactory]
Vcy Vcy

Vr V
 33  0.013
Vcx Vcx [Satisfactory]

2. CHECK OF BRACING FOR STRENGTH CAPACITY

Design of bracing for Compression
Pc = 41.2 kN [Satisfactory] [Chapter E5]
III. CHECK DEFORMATION
1. Vertical Defection

∆x = 9.910 mm < ∆limit = L/600 = 10.83 mm [Satisfactory]

2. Horizontal Defection

∆x = 1.700 mm < ∆limit = L/400 = 16.25 mm [Satisfactory]

96
 Job No. PHL.T3.25.21 Item POWERHOUSE Revision 00
Date 11/2021
Project CATAINGAN PROJECT
Designer LHD
Section BASE PLATE CONNECTION B1 Checker JCT

I. MATERIAL
Anchor bolt
Grade 5.6
Ultimate strength of bolt Fbu = 50 kN/cm2
Nominal tensile strength Fnt = 0.75 Fu = 37.5 kN/cm2
Nominal shear strength Fnv = 0.45 Fu = 22.5 kN/cm2
Plate
Material A572 Gr 50
Ultimate strength Fu = 44.8 kN/cm2
Yield strength Fy = 34.5 kN/cm2
Weld
Weld material E7XT
Weld metal strength FEXX = 48.3 kN/cm2
Concrete
Concrete type B25
Compressive strength f'c = 2.00 kN/cm2

II. REACTION FORCE

COMBINATION LOAD V (kN) Fz (kN)

Max compression -42.22 41.33
Max shear with compression -42.22 41.33
Max tension 49.79 -62.86
Max shear with tension 53.17 -51.95

III. INPUT PARAMETERS

Column section
Height d= 228 mm
Width bf = 164 mm
Web thickness tw = 5 mm
Flange thickness tf = 8 mm

Base Plate Dimension

Extended outside of flange do = 10 mm
Width B= 184 mm
Height N= 248 mm
Thickness tp = 16 mm
Stiffeners support column flange
Stiffeners outside of column
Height hs = 150 mm
Thickness ts = 6 mm
Stiffeners inside of column
Stiffener at center of web of column

97
 Job No. PHL.T3.25.21 Item POWERHOUSE Revision 00
Date 11/2021
Project CATAINGAN PROJECT
Designer LHD
Section BASE PLATE CONNECTION B1 Checker JCT

Welds height
Column web to base plate hw,w = 5 mm
Column flange to base plate hw,f = 8 mm
Stiffeners to column hw,s = 5 mm

Concrete bearing
Height Nc = 300 mm
Width Bc = 300 mm

Anchor Bolt
Anchor Bolt Diameter db = M20
Effective embedment depth hef = 170 mm

Bolt group inside of flange

Number of Bolts/1 row nbi = 2
Total number of symetrical rows nri = 2 >= 2
Distance from bolt to vertical edge Lh = 74 mm
Horizontal bolt spacing si = 0 mm
Vertical bolt spacing gi = 100 mm
Distance from bolt to horizontal edge Lv = 42 mm
Distance of 2 innermost bolt rows sd = 100 mm
Bolt row at center
Total number of bolt rows ntt,bi = 2

98
 Job No. PHL.T3.25.21 Item POWERHOUSE Revision 00
Date 11/2021
Project CATAINGAN PROJECT
Designer LHD
Section BASE PLATE CONNECTION B1 Checker JCT

IV. CHECK CAPACITY AISC 360-10, AISC Design Guide 1, 4, 16, ACI318-11
Base plate area
A1 = B.N = 45632 mm2
Max area of portion of the supporting surface
A2 = min(4A1, Bc.Nc) = 90000 mm2
The maximum concrete bearing strength

( ) = min 0.85 , 1.7 /Ω = 0.010 kN/mm2

Ωc = 2.31
= ( ) = 1.90 kN/mm
( ) = ( ) = 472.09 kN
Base plate cantilever dimension
− 0.95
= = 15.70 mm
2
− 0.8
= = 26.40 mm
2
Moment strength of 1 stiffener
M s = F cr .S x = 4968 kNmm
2
S x = t s .h s /6 = 22500 mm3
F cr = 0.221 kN/mm2
The nominal strength of stiffener weld
, = = 307 kN
.
= 0.6 1 + 0.5 sin = 0.29 kN/mm2
= 2. 2/2. ℎ , = 1061 mm2
le = 150 mm
Total moment strength of base plate and stiffener outside of column at bearing interface
M tt,c = M n,c + n.M s = 2206 kNmm
n= 0
Moment strength of base plate outside of column at bearing interface
M n,c = F y .b ef .t p 2 /4 = 2206 kNmm
Total moment strength of base plate and stiffener inside of column at bearing interface
M tt,c = M n,c + n sie .M s = 2339 kNmm
n sie = 0
Moment strength of base plate inside of column at bearing interface
M n,c = F y .b sef .t p 2 /4 = 2339 kNmm
The nominal strength of weld of column web and base plate bearing shear
, = , = 393 kN
. 0.29 kN/mm2
, = 0.6 1 + 0.5 sin =
θ= 0.00 rad
= (2. 2/2 ℎ , + 2/2. ) = 1358 mm2
wg = 0 mm
le = 192 mm
l = h w - 20 = 192 mm

99
 Job No. PHL.T3.25.21 Item POWERHOUSE Revision 00
Date 11/2021
Project CATAINGAN PROJECT
Designer LHD
Section BASE PLATE CONNECTION B1 Checker JCT

Effective width of bolts to flange column

, = min( . 2ℎ , ; − ; −1 + 2ℎ , )= 80 mm
2 2 2 2
56 mm h bef,f =
The nominal strength of flange weld and base plate bearing tension
, = , = 391 kN
.
, = 0.6 1 + 0.5 sin = 0.43 kN/mm2
= (2. 2/2 ℎ , + 2/2. ) = 899 mm2
wg = 0 mm
le = 80 mm
l = b bef,f = 80 mm
Effective width of bolts to web column
, = min( , . 2ℎ , ; ℎ − 20; 2 + 2ℎ , )= 192 mm
h bef,w = 50 mm

1. COMBO : MAX COMPRESSION

Capacity of concrete
= 0.09 ≤ 1.00 OK
( )

Base plate and stiffener at bearing interface

Stress of compression applied to concrete
f p = P r / (B.N) = 0.001 kN/mm2
*Base plate at bearing interface outside with "m"
,
= 0.01 ≤ 1.00 OK
, /Ω
Ωs = 1.67
The required moment of the base plate at bearing interface with "m"

, = 2 = 11.16 kNmm
l=m = 15.70 mm
b ef = 100 mm
*Stiffener weld at bearing interface outside of column with "m"
,
= 0.00 ≤ 1.00 OK
, /Ω
Ωw = 2.00
Required strength of stiffener weld
, = . . = 0.00 kN
*Base plate at bearing interface outside with "n"
,
= 0.02 ≤ 1.00 OK
/Ω ,
Ωs = 1.67
The required moment of the base plate at bearing interface with "n"
, = 2 = 16.67 kNmm
l=n= 26.40 mm
b ef = 53 mm

100
 Job No. PHL.T3.25.21 Item POWERHOUSE Revision 00
Date 11/2021
Project CATAINGAN PROJECT
Designer LHD
Section BASE PLATE CONNECTION B1 Checker JCT

*Stiffener weld at bearing interface outside of column with "n"

,
= 0.00 ≤ 1.00 OK
, /Ω
Ωw = 2.00
Required strength of stiffener weld
, = . . = 0.00 kN
*Base plate at bearing interface inside of column
,
= 0.01 ≤ 1.00 OK
, /Ω
Ωs = 1.67
The required moment of the base plate at bearing interface

, = 2 = 9.99 kNmm

l = λn' = 14.43 mm
.
′= = 14.43 mm
4
2
= min( ; 1) = 0.30
1+ 1−
4
= = 0.09
( + ) ( )

b sef = 106 mm
*Weld of base plate and column web bearing shear

= 0.21 ≤ 1.00 OK
, /Ω

Ωw = 2.00
*Stiffener weld at bearing interface inside of column
,
= 0.00 ≤ 1.00 OK
, /Ω
Ωw = 2.00
Required strength of stiffener weld
, = . . = 1.39 kN

Anchor bolts
*Capacity of bolts bearing shear
/
= = 0.37 ≤ 1.00 OK
/Ω
Ωb = 2.00
R nv = 0.8.F nv .A b = 57 kN

2. COMBO : MAX SHEAR WITH COMPRESSION

Capacity of concrete
= 0.09 ≤ 1.00 OK
( )

Base plate and stiffener at bearing interface

Stress of compression applied to concrete
f p = P r / (B.N) = 0.001 kN/mm2 101
 Job No. PHL.T3.25.21 Item POWERHOUSE Revision 00
Date 11/2021
Project CATAINGAN PROJECT
Designer LHD
Section BASE PLATE CONNECTION B1 Checker JCT

*Base plate at bearing interface outside with "m"

,
= 0.01 ≤ 1.00 OK
, /Ω
1.67 Ωs =
The required moment of the base plate at bearing interface with "m"
, = 2 = 11.16 kNmm
l=m = 15.70 mm
b ef = 100 mm
*Stiffener weld at bearing interface outside of column with "m"
,
= 0.00 ≤ 1.00 OK
, /Ω
Ωw = 2.00
Required strength of stiffener weld
, = . . = 0.00 kN
*Base plate at bearing interface outside with "n"
,
= 0.02 ≤ 1.00 OK
, /Ω
Ωs = 1.67
The required moment of the base plate at bearing interface with "n"
, = = 2 16.67 kNmm
l=n= 26.40 mm
b ef = 53 mm
*Stiffener weld at bearing interface outside of column with "n"
,
= 0.00 ≤ 1.00 OK
, /Ω
Ωw = 2.00
Required strength of stiffener weld
, = . . = 0.00 kN
*Base plate at bearing interface inside of column
,
= 0.01 ≤ 1.00 OK
, /Ω
Ωs = 1.67
The required moment of the base plate at bearing interface

, = 2 = 9.99 kNmm
l = λn' = 14.43 mm
.
′= = 14.43 mm
4
2
= min( ; 1) = 0.30
1+ 1−
4
= = 0.09
( + ) ( )
b sef = 106 mm
*Weld of base plate and column web bearing shear
= 0.21 ≤ 1.00 OK
, /Ω
Ωw = 2.00

102
 Job No. PHL.T3.25.21 Item POWERHOUSE Revision 00
Date 11/2021
Project CATAINGAN PROJECT
Designer LHD
Section BASE PLATE CONNECTION B1 Checker JCT

*Stiffener weld at bearing interface inside of column

,
= 0.00 ≤ 1.00 OK
, /Ω
Ωw = 2.00
Required strength of stiffener weld
, = . . = 1.39 kN

Anchor bolts
*Capacity of bolts bearing shear
/
= = 0.37 ≤ 1.00 OK
/Ω
Ωb = 2.00
R nv = 0.8.F nv .A b = 57 kN

3. COMBO : MAX TENSION

Base plate and stiffener bearing tension of anchor bolts
*Base plate bearing tension of bolt inside of column
,
= 0.59 ≤ 1.00 OK
, /Ω
Ωs = 1.67
The required moment of the base plate bearing tension of bolt
, = ( . )= 1493 kNmm
The moment strength of the base plate and stiffeners bearing tension of bolt
M tt,ti = M n,ti + n si,e .M s = 4236 kNmm
n si,tt = 0
The moment strength of the base plate bearing tension of bolt
M n,ti = F y .b bef,w .t p 2 /4 = 4236 kNmm
*Weld of base plate and column flange bearing tension
,
= 0.08 ≤ 1.00 OK
, /Ω
Ωw = 2.00
Required strength of flange weld bearing tension
, = 15.71 kN
*Weld of base plate and column web bearing tension and shear
,
= 0.30 ≤ 1.00 OK
, /Ω
Ωw = 2.00
Required strength of weld bearing tension and shear

, = , + = 80.19 kN

T w,w = 62.86 kN
The nominal strength of weld
, = , = 530 kN
.
, = 0.6 1 + 0.5 sin = 0.39 kN/mm2
θ= 0.90 rad
= (2. 2/2 ℎ , + 2/2. ) = 1358 mm2
wg = 0 mm
le = 192 mm
103
 Job No. PHL.T3.25.21 Item POWERHOUSE Revision 00
Date 11/2021
Project CATAINGAN PROJECT
Designer LHD
Section BASE PLATE CONNECTION B1 Checker JCT

l = b bef,w = 192 mm
*Stiffener weld inside of column
,
= 0.00 ≤ 1.00 OK
, , /Ω
Ωw = 2.00
Anchor bolts
*Steel capacity of bolts in tension

= = 0.27 ≤ 1.00 OK
/Ω
Ωb = 2.00
Tensile strength of 1 bolt
R nt = F' nt .A b = 118 kN
2
A b = πd b /4 = 314 mm2
*Pullout capacity of bolts in tension
= = 0.37 ≤ 1.00 OK
/Ω
Ωbc = 2.14
The nominal pullout strength of 1 anchor
N pn = Ψ c,p .N p = 89.7 kN
Ψ c,p = 1.40
Chemical anchor Np = 64.1 kN
*Capacity of bolts bearing shear
/
= = 0.44 ≤ 1.00 OK
/Ω
Ωb = 2.00
R nv = 0.8.F nv .A b = 57 kN
*Capacity of bolts bearing tension and shear
max( , )+ = 0.82 ≤ 1.20 OK

4 COMBO : MAX SHEAR WITH TENSION

Base plate and stiffener bearing tension of anchor bolts
*Base plate bearing tension of bolt inside of column
,
= 0.49 ≤ 1.00 OK
, /Ω
Ωs = 1.67
The required moment of the base plate bearing tension of bolt
, = ( . )= 1234 kNmm
The moment strength of the base plate and stiffeners bearing tension of bolt
M tt,ti = M n,ti + n si,e .M s = 4236 kNmm
n si,tt =
0
The moment strength of the base plate bearing tension of bolt
M n,ti = F y .b bef,w .t p 2 /4 = 4236 kNmm
*Weld of base plate and column flange bearing tension
,
= 0.07 ≤ 1.00 OK
, /Ω

Ωw = 2.00

104
 Job No. PHL.T3.25.21 Item POWERHOUSE Revision 00
Date 11/2021
Project CATAINGAN PROJECT
Designer LHD
Section BASE PLATE CONNECTION B1 Checker JCT

Required strength of flange weld bearing tension

, = 12.99 kN
*Weld of base plate and column web bearing tension and shear
,
= 0.29 ≤ 1.00 OK
, /Ω
Ωw = 2.00
Required strength of weld bearing tension and shear

, = , + = 74.33 kN

T w,w = 51.95 kN
The nominal strength of weld
, = , = 508 kN
.
, = 0.6 1 + 0.5 sin = 0.37 kN/mm2
θ= 0.77 rad
= (2. 2/2 ℎ , + 2/2. ) = 1358 mm2
wg = 0 mm
le = 192 mm
l = b bef,w = 192 mm
*Stiffener weld at tension interface inside of column
,
= 0.00 ≤ 1.00 OK
, , /Ω
Ωw = 2.00
Anchor bolts
*Steel capacity of bolts in tension

= = 0.22 ≤ 1.00 OK
/Ω
Ωb = 2.00
Maximum tension on 1 bolt
T bmax = 12.99 kN
Tensile strength of 1 bolt
R nt = F' nt .A b = 118 kN
A b = πd b 2 /4 = 314 mm2

*Pullout capacity of bolts in tension

= = 0.31 ≤ 1.00 OK
/Ω
Ωbc = 2.14
*Capacity of bolts bearing shear
/
= = 0.47 ≤ 1.00 OK
/Ω
Ωb = 2.00
R nv = 0.8.F nv .A b = 57 kN
*Capacity of bolts bearing tension and shear
max( , )+ = 0.78 ≤ 1.20 OK

Reinforcement concrete contract must check capacity of reinforcement concrete follow this design.

105
 Job No. PHL.T3.25.21 Item POWERHOUSE Revision 00
Date 11/2021
Project CATAINGAN PROJECT
Designer LHD
Section BASE PLATE CONNECTION B2 Checker JCT

I. MATERIAL
Anchor bolt
Grade 5.6
Ultimate strength of bolt Fbu = 50 kN/cm2
Nominal tensile strength Fnt = 0.75 Fu = 37.5 kN/cm2
Nominal shear strength Fnv = 0.45 Fu = 22.5 kN/cm2
Plate
Material A572 Gr 50
Ultimate strength Fu = 44.8 kN/cm2
Yield strength Fy = 34.5 kN/cm2
Weld
Weld material E7XT
Weld metal strength FEXX = 48.3 kN/cm2
Concrete
Concrete type B25
Compressive strength f'c = 2.00 kN/cm2

II. REACTION FORCE

COMBINATION LOAD V (kN) Fz (kN)

Max compression 16.90 119.71
Max shear with compression -22.46 12.32
Max tension 8.60 -83.19
Max shear with tension -35.49 -46.57

III. INPUT PARAMETERS

Column section
Height d= 300 mm
Width bf = 184 mm
Web thickness tw = 6 mm
Flange thickness tf = 8 mm

Base Plate Dimension

Extended outside of flange do = 10 mm
Width B= 212 mm
Height N= 320 mm
Thickness tp = 20 mm
Stiffeners support column flange
Stiffeners outside of column
Height hs = 150 mm
Thickness ts = 6 mm
Spacing of outside column stiffener sso = 100 mm
Number of outside column stiffener nso = 2
Critical effective width bef = 106 mm
Stiffeners inside of column
Number of inside column stiffener ssi = 0
Spacing of inside column stiffener nsi = 120 mm
Stiffener at center of web of column

106
 Job No. PHL.T3.25.21 Item POWERHOUSE Revision 00
Date 11/2021
Project CATAINGAN PROJECT
Designer LHD
Section BASE PLATE CONNECTION B2 Checker JCT

Welds height
Column web to base plate hw,w = 6 mm
Column flange to base plate hw,f = 8 mm
Stiffeners to column hw,s = 5 mm

Concrete bearing
Height Nc = 420 mm
Width Bc = 320 mm

Anchor Bolt
Anchor Bolt Diameter db = M27
Effective embedment depth hef = 560 mm

Bolt group inside of flange

Number of Bolts/1 row nbi = 2
Total number of symetrical rows nri = 2 >= 2
Distance from bolt to vertical edge Lh = 100 mm
Horizontal bolt spacing si = 0 mm
Vertical bolt spacing gi = 120 mm
Distance from bolt to horizontal edge Lv = 46 mm
Distance of 2 innermost bolt rows sd = 120 mm
Bolt row at center
Total number of bolt rows ntt,bi = 2

107
 Job No. PHL.T3.25.21 Item POWERHOUSE Revision 00
Date 11/2021
Project CATAINGAN PROJECT
Designer LHD
Section BASE PLATE CONNECTION B2 Checker JCT

IV. CHECK CAPACITY AISC 360-10, AISC Design Guide 1, 4, 16, ACI318-11
Base plate area
A1 = B.N = 67840 mm2
Max area of portion of the supporting surface
A2 = min(4A1, Bc.Nc) = 134400 mm2
The maximum concrete bearing strength

( ) = min 0.85 , 1.7 /Ω = 0.010 kN/mm2

Ωc = 2.31
= ( ) = 2.20 kN/mm
( ) = ( ) = 703.42 kN
Base plate cantilever dimension
− 0.95
= = 17.50 mm
2
− 0.8
= = 32.40 mm
2
Moment strength of 1 stiffener
M s = F cr .S x = 4968 kNmm
2
S x = t s .h s /6 = 22500 mm3
F cr = 0.221 kN/mm2
The nominal strength of stiffener weld
, = = 307 kN
.
= 0.6 1 + 0.5 sin = 0.29 kN/mm2
= 2. 2/2. ℎ , = 1061 mm2
le = 150 mm
Total moment strength of base plate and stiffener outside of column at bearing interface
M tt,c = M n,c + n.M s = 3654 kNmm
n= 0
Moment strength of base plate outside of column at bearing interface
M n,c = F y .b ef .t p 2 /4 = 3654 kNmm
Total moment strength of base plate and stiffener inside of column at bearing interface
M tt,c = M n,c + n sie .M s = 4895 kNmm
n sie = 0
Moment strength of base plate inside of column at bearing interface
M n,c = F y .b sef .t p 2 /4 = 4895 kNmm
The nominal strength of weld of column web and base plate bearing shear
, = , = 649 kN
. 0.29 kN/mm2
, = 0.6 1 + 0.5 sin =
θ= 0.00 rad
= (2. 2/2 ℎ , + 2/2. ) = 2240 mm2
wg = 0 mm
le = 264 mm
l = h w - 20 = 264 mm

108
 Job No. PHL.T3.25.21 Item POWERHOUSE Revision 00
Date 11/2021
Project CATAINGAN PROJECT
Designer LHD
Section BASE PLATE CONNECTION B2 Checker JCT

Effective width of bolts to flange column

, = min( . 2ℎ , ; − ; −1 + 2ℎ , )= 89 mm
2 2 2 2
82 mm h bef,f =
The nominal strength of flange weld and base plate bearing tension
, = , = 438 kN
.
, = 0.6 1 + 0.5 sin = 0.43 kN/mm2
= (2. 2/2 ℎ , + 2/2. ) = 1007 mm2
wg = 0 mm
le = 89 mm
l = b bef,f = 89 mm
Effective width of bolts to web column
, = min( , . 2ℎ , ; ℎ − 20; 2 + 2ℎ , )= 240 mm
h bef,w = 60 mm

1. COMBO : MAX COMPRESSION

Capacity of concrete
= 0.17 ≤ 1.00 OK
( )

Base plate and stiffener at bearing interface

Stress of compression applied to concrete
f p = P r / (B.N) = 0.002 kN/mm2
*Base plate at bearing interface outside with "m"
,
= 0.01 ≤ 1.00 OK
, /Ω
Ωs = 1.67
The required moment of the base plate at bearing interface with "m"

, = 2 = 28.64 kNmm
l=m = 17.50 mm
b ef = 106 mm
*Stiffener weld at bearing interface outside of column with "m"
,
= 0.00 ≤ 1.00 OK
, /Ω
Ωw = 2.00
Required strength of stiffener weld
, = . . = 0.00 kN
*Base plate at bearing interface outside with "n"
,
= 0.04 ≤ 1.00 OK
/Ω ,
Ωs = 1.67
The required moment of the base plate at bearing interface with "n"
, = 2 = 60.02 kNmm
l=n= 32.40 mm
b ef = 65 mm

109
 Job No. PHL.T3.25.21 Item POWERHOUSE Revision 00
Date 11/2021
Project CATAINGAN PROJECT
Designer LHD
Section BASE PLATE CONNECTION B2 Checker JCT

*Stiffener weld at bearing interface outside of column with "n"

,
= 0.00 ≤ 1.00 OK
, /Ω
Ωw = 2.00
Required strength of stiffener weld
, = . . = 0.00 kN
*Base plate at bearing interface inside of column
,
= 0.03 ≤ 1.00 OK
, /Ω
Ωs = 1.67
The required moment of the base plate at bearing interface

, = 2 = 75.52 kNmm

l = λn' = 24.55 mm
.
′= = 24.55 mm
4
2
= min( ; 1) = 0.42
1+ 1−
4
= = 0.16
( + ) ( )

b sef = 142 mm
*Weld of base plate and column web bearing shear

= 0.05 ≤ 1.00 OK
, /Ω

Ωw = 2.00
*Stiffener weld at bearing interface inside of column
,
= 0.00 ≤ 1.00 OK
, /Ω
Ωw = 2.00
Required strength of stiffener weld
, = . . = 6.15 kN

Anchor bolts
*Capacity of bolts bearing shear
/
= = 0.08 ≤ 1.00 OK
/Ω
Ωb = 2.00
R nv = 0.8.F nv .A b = 103 kN

2. COMBO : MAX SHEAR WITH COMPRESSION

Capacity of concrete
= 0.02 ≤ 1.00 OK
( )

Base plate and stiffener at bearing interface

Stress of compression applied to concrete
f p = P r / (B.N) = 0.000 kN/mm2 110
 Job No. PHL.T3.25.21 Item POWERHOUSE Revision 00
Date 11/2021
Project CATAINGAN PROJECT
Designer LHD
Section BASE PLATE CONNECTION B2 Checker JCT

*Base plate at bearing interface outside with "m"

,
= 0.00 ≤ 1.00 OK
, /Ω
1.67 Ωs =
The required moment of the base plate at bearing interface with "m"
, = 2 = 2.95 kNmm
l=m = 17.50 mm
b ef = 106 mm
*Stiffener weld at bearing interface outside of column with "m"
,
= 0.00 ≤ 1.00 OK
, /Ω
Ωw = 2.00
Required strength of stiffener weld
, = . . = 0.00 kN
*Base plate at bearing interface outside with "n"
,
= 0.00 ≤ 1.00 OK
, /Ω
Ωs = 1.67
The required moment of the base plate at bearing interface with "n"
, = = 2 6.18 kNmm
l=n= 32.40 mm
b ef = 65 mm
*Stiffener weld at bearing interface outside of column with "n"
,
= 0.00 ≤ 1.00 OK
, /Ω
Ωw = 2.00
Required strength of stiffener weld
, = . . = 0.00 kN
*Base plate at bearing interface inside of column
,
= 0.00 ≤ 1.00 OK
, /Ω
Ωs = 1.67
The required moment of the base plate at bearing interface

, = 2 = 0.74 kNmm
l = λn' = 7.58 mm
.
′= = 7.58 mm
4
2
= min( ; 1) = 0.13
1+ 1−
4
= = 0.02
( + ) ( )
b sef = 142 mm
*Weld of base plate and column web bearing shear
= 0.07 ≤ 1.00 OK
, /Ω
Ωw = 2.00

111
 Job No. PHL.T3.25.21 Item POWERHOUSE Revision 00
Date 11/2021
Project CATAINGAN PROJECT
Designer LHD
Section BASE PLATE CONNECTION B2 Checker JCT

*Stiffener weld at bearing interface inside of column

,
= 0.00 ≤ 1.00 OK
, /Ω
Ωw = 2.00
Required strength of stiffener weld
, = . . = 0.20 kN

Anchor bolts
*Capacity of bolts bearing shear
/
= = 0.11 ≤ 1.00 OK
/Ω
Ωb = 2.00
R nv = 0.8.F nv .A b = 103 kN

3. COMBO : MAX TENSION

Base plate and stiffener bearing tension of anchor bolts
*Base plate bearing tension of bolt inside of column
,
= 0.48 ≤ 1.00 OK
, /Ω
Ωs = 1.67
The required moment of the base plate bearing tension of bolt
, = ( . )= 2371 kNmm
The moment strength of the base plate and stiffeners bearing tension of bolt
M tt,ti = M n,ti + n si,e .M s = 8274 kNmm
n si,tt = 0
The moment strength of the base plate bearing tension of bolt
M n,ti = F y .b bef,w .t p 2 /4 = 8274 kNmm
*Weld of base plate and column flange bearing tension
,
= 0.10 ≤ 1.00 OK
, /Ω
Ωw = 2.00
Required strength of flange weld bearing tension
, = 20.80 kN
*Weld of base plate and column web bearing tension and shear
,
= 0.19 ≤ 1.00 OK
, /Ω
Ωw = 2.00
Required strength of weld bearing tension and shear

, = , + = 83.63 kN

T w,w = 83.19 kN
The nominal strength of weld
, = , = 883 kN
.
, = 0.6 1 + 0.5 sin = 0.43 kN/mm2
θ= 1.47 rad
= (2. 2/2 ℎ , + 2/2. ) = 2036 mm2
wg = 0 mm
le = 240 mm
112
 Job No. PHL.T3.25.21 Item POWERHOUSE Revision 00
Date 11/2021
Project CATAINGAN PROJECT
Designer LHD
Section BASE PLATE CONNECTION B2 Checker JCT

l = b bef,w = 240 mm
*Stiffener weld inside of column
,
= 0.00 ≤ 1.00 OK
, , /Ω
Ωw = 2.00
Anchor bolts
*Steel capacity of bolts in tension

= = 0.19 ≤ 1.00 OK
/Ω
Ωb = 2.00
Tensile strength of 1 bolt
R nt = F' nt .A b = 215 kN
2
A b = πd b /4 = 573 mm2
*Pullout capacity of bolts in tension
= = 0.54 ≤ 1.00 OK
/Ω
Ωbc = 2.14
The nominal pullout strength of 1 anchor
N pn = Ψ c,p .N p = 82.7 kN
Ψ c,p = 1.40
Headed anchor N p = 8.A brg .f' c = 141.3 kN
A brg = 883 mm2
*Capacity of bolts bearing shear
/
= = 0.04 ≤ 1.00 OK
/Ω
Ωb = 2.00
R nv = 0.8.F nv .A b = 103 kN
*Capacity of bolts bearing tension and shear
max( , )+ = 0.58 ≤ 1.20 OK

4 COMBO : MAX SHEAR WITH TENSION

Base plate and stiffener bearing tension of anchor bolts
*Base plate bearing tension of bolt inside of column
,
= 0.27 ≤ 1.00 OK
, /Ω
Ωs = 1.67
The required moment of the base plate bearing tension of bolt
, = ( . )= 1327 kNmm
The moment strength of the base plate and stiffeners bearing tension of bolt
M tt,ti = M n,ti + n si,e .M s = 8274 kNmm
n si,tt =
0
The moment strength of the base plate bearing tension of bolt
M n,ti = F y .b bef,w .t p 2 /4 = 8274 kNmm
*Weld of base plate and column flange bearing tension
,
= 0.05 ≤ 1.00 OK
, /Ω
Ωw = 2.00

113
 Job No. PHL.T3.25.21 Item POWERHOUSE Revision 00
Date 11/2021
Project CATAINGAN PROJECT
Designer LHD
Section BASE PLATE CONNECTION B2 Checker JCT

Required strength of flange weld bearing tension

, = 11.64 kN
*Weld of base plate and column web bearing tension and shear
,
= 0.15 ≤ 1.00 OK
, /Ω
Ωw = 2.00
Required strength of weld bearing tension and shear

, = , + = 58.55 kN

T w,w = 46.57 kN
The nominal strength of weld
, = , = 799 kN
.
, = 0.6 1 + 0.5 sin = 0.39 kN/mm2
θ= 0.92 rad
= (2. 2/2 ℎ , + 2/2. ) = 2036 mm2
wg = 0 mm
le = 240 mm
l = b bef,w = 240 mm
*Stiffener weld at tension interface inside of column
,
= 0.00 ≤ 1.00 OK
, , /Ω
Ωw = 2.00
Anchor bolts
*Steel capacity of bolts in tension

= = 0.11 ≤ 1.00 OK
/Ω
Ωb = 2.00
Maximum tension on 1 bolt
T bmax = 11.64 kN
Tensile strength of 1 bolt
R nt = F' nt .A b = 215 kN
A b = πd b 2 /4 = 573 mm2

*Pullout capacity of bolts in tension

= = 0.30 ≤ 1.00 OK
/Ω
Ωbc = 2.14
*Capacity of bolts bearing shear
/
= = 0.17 ≤ 1.00 OK
/Ω
Ωb = 2.00
R nv = 0.8.F nv .A b = 103 kN
*Capacity of bolts bearing tension and shear
max( , )+ = 0.47 ≤ 1.20 OK

Reinforcement concrete contract must check capacity of reinforcement concrete follow this design.

114
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT
Designed by LHD
Description MEP 4 4 24 Checked by JCT

I. MATERIAL
Bolt
Grade 10.9
Ultimate strength of bolt Fu = 100 kN/cm²
Nominal tensile strength Fnt = 0.75 Fu = 75 kN/cm² (Table J3.2)
Nominal shear strength Fnv = 0.45 Fu = 45 kN/cm² (Table J3.2)
Pretension force Tb = 257 kN

Plate
Material A572 Gr 50
Ultimate tensile strength Fu = 44.8 kN/cm²
Yeild strength Fy = 34.5 kN/cm²

Column, Beam
Material A572 Gr 50
Ultimate tensile strength Fu = 44.8 kN/cm²
Yeild strength Fy = 34.5 kN/cm²
Elastic module E= 20000 kN/cm²
Weld
Weld material E7XT
Weld metal strength FEXX = 48.3 kN/cm²

II. INTERNAL FORCE FOR CALCULATING

Beam
Combo Axial (kN) V2 (kN) M33 (kNm)
Negative Moment -21.04 -43.14 -107.26
Positive Moment 44.56 74.91 231.78
Shear 44.56 74.91 231.78

Column
Combo Axial (kN) V2 (kN) M33 (kNm)
Negative Moment -62.37 -17.35 107.22
Positive Moment 77.42 42.46 -231.63

III. MEMBERS
Column section
Height h= 600 mm
Width bf = 184 mm
Web thickness tw = 6 mm
Flange thickness tf = 25 mm
Column end

Beam section
Height h= 600 mm
Width bf = 184 mm
Web thickness tw = 6 mm
Flange thickness tf = 8 mm
Vertical angle i= 20.1 %
Include flange stiffener
Thickness for flange stiffener ts = 10 mm
Opposite beam

115
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT
Designed by LHD
Description MEP 4 4 24 Checked by JCT

IV. END PLATE

Connector
Plate extension Extended external edge
Plate thickness tp = 25 mm
Plate width B= 212 mm

Weld
Flange weld size Wf = 8 mm
Web weld size Ww = 6 mm

Bolts
Type M24
Gage - tranverse center-to-center spacing g= 120 mm
Vertical edge distance Lev = 60 mm
Horizontal edge distance Leh = 46 mm

Bolt group (external extension)

Distance from bolt rows to flange pf,o = 70 mm

Bolt group (external flange)

Bolts rows number 1
Distance from bolt rows to flange C= 80 mm
Vertical spacing between inner bolt rows p = 0 mm
pf,i = 72 mm

Bolt group (internal flange)

Bolts rows number 2
Distance from bolt rows to flange C= 80 mm
Vertical spacing between inner bolt rows p = 220 mm
pf,i = 72 mm

Transverse stiffeners
Full depth
Stiffeners length Ls = 250 mm
Stiffeners width bs = 79 mm
Stiffeners thickness ts = 8 mm
Corner clip cc = 10 mm
Web weld size W sw = 5 mm
Flange weld size W sf = 8 mm
Column web panel zone stiffeners
Stiffener type Without stiffener

116
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT
Designed by LHD
Description MEP 4 4 24 Checked by JCT

V. DESIGN CHECK
1. Moment end plate (external flange)
a. Flexural yielding
1
= = 748.25 kNm DG16 Sec 2.5
Ω Ω
With: W= 1.67
gr = 1
Y= 5799.50 mm Tables (4-2…6)
Demand flexural moment Man = 98.46 kNm
Ratio demand/capacity D/C = 0.13 OK

b. No prying bolt moment strength

1
= 2 ( )= 409.13 kNm DG16 Sec 2.5
Ω Ω W= 2
With:

= = 339.29 kN
4
= 1206 mm
Demand flexural moment Man = 98.46 kNm
Ratio demand/capacity D/C = 0.24 OK

0.9 > Thick plate behavior

Ω Ω
c. Bolt rupture with prying moment strength
Maximum prying force of interior bolts
′
, = −3 = 38.82 kN DG16 Sec 2.5
4 ′
With: ′= /2 − = 79.00 mm

= 25.4 3.682 − 0.085 = 103.55 mm

0.85 + 0.80 ′ +
2 8
= = 129.11 kN
4 ,
Maximum prying force of outer bolts
′
, = −3 = 66.77 kN DG16 Sec 2.5
4 ′
With: ′= /2 − = 79.00 mm

= min ; 25.4 3.682 − 0.085 = 60.00 mm

0.85 + 0.80 ′ +
2 8
= = 132.51 kN
4 ,
Moment strength
[2 − , +2 − , + +2 ]
1 [2 − , +2 ( + + ]
= max = 343.37 kN.m DG16 Sec 2.5
Ω Ω [2 − , + + 2 ( + )]
2 ( + + +

With: W= 2
= = 339.29 kN
4
Tb = 257 kN
Demand flexural moment Man = 0.00 kNm
Ratio demand/capacity D/C = 0.00 NO CHECK

117
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT
Designed by LHD
Description MEP 4 4 24 Checked by JCT

d. Bolts shear
1
= = 407.15 kN AISC Eq. J3-1
Ω Ω 4
With: W= 2
n= 4
Demand shear strength Va = 64.656086 kN
Ratio demand/capacity D/C = 0.16 OK

e. Bolts bearing under shear load

1
= 2 min( , ( )) + 2( − 1) min( r , ( )) = 625.18 kN AISC Eq. J3-6
Ω Ω 2
Với W= 2
n= 4
= 1.2 = 625.18 kN
= 1.2 = 0.00 kN
( ) = 2.4 = 645.35 kN
= − /2 = 46.50 mm
= − = 0.00 mm

Demand shear strength Va = 64.66 kN

Ratio demand/capacity D/C = 0.10 OK

f. Shear yielding 1
= 0.6 = 656.45 kN DG4 Eq. 3.12
Ω Ω
With: W= 1.67
Demand shear strength Va = 177.31 kN
Ratio demand/capacity D/C = 0.27 OK

g. Shear rupture
1
= 0.6 [ − 2( + 1.6)] t = 520.31 kN DG4 Eq. 3.13
Ω Ω
With: W= 2
Demand shear strength Va = 177.31 kN
Ratio demand/capacity D/C = 0.34 OK

2. Moment end plate (internal flange)

a. Flexural yielding
1
= = 419.06 kNm DG16 Sec 2.5
Ω Ω
With: W= 1.67
gr = 1.25
Y= 4060.02 mm Tables (4-2…6)
Demand flexural moment Map = 249.42846 kNm
Ratio demand/capacity D/C = 0.60 OK

b. No prying bolt moment strength

1
= 2 ( )= 283.59 kNm DG16 Sec 2.5
Ω Ω
With: W= 2
= = 339.29 kN
4
= 835.84 mm

Demand flexural moment Map = 249.42846 kNm

Ratio demand/capacity D/C = 0.88 OK

0.9 > Thick plate behavior

Ω Ω

118
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT
Designed by LHD
Description MEP 4 4 24 Checked by JCT

c. Bolt rupture with prying moment strength

Maximum prying force of interior bolts
′
, = −3 = 38.82 kN DG16 Sec 2.5
4 ′
With: ′= /2 − = 79.00 mm
= 25.4 3.682 − 0.085 =
103.55 mm

0.85 + 0.80 ′ +
2 8
= = 129.11 kN
4 ,

Moment strength
1 2( − , )( + )
= max = 251.15 kN.m DG16 Sec 2.5
Ω Ω 2 ( + )
With: W= 2
= = 339.29 kN
4
Tb = 257 kN

Demand flexural moment Map = 0.00 kNm

Ratio demand/capacity D/C = 0.00 NO CHECK

d. Bolts shear 1
= = 407.15 kN AISC J3-1
Ω Ω 4
With: W= 2
n= 4
Demand shear strength Va = 38.144646 kN
Ratio demand/capacity D/C = 0.09 OK

e. Bolts bearing under shear load

1
= 2 min( , ( )) + 2( − 1) min( r , ( )) = 1270.53 kN AISC Eq. J3-6
Ω Ω 2
With: W= 2
n= 4
= 1.2 = 625.18 kN
= 1.2 = 2594.85 kN
( ) = 2.4 = 645.35 kN
= − /2 = 46.50 mm
= − = 193.00 mm

Demand shear strength Va = 64.66 kN

Ratio demand/capacity D/C = 0.05 OK

119
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT
Designed by LHD
Description MEP 4 4 24 Checked by JCT

f. Shear yielding 1
= 0.6 = 656.45 kN DG4 Eq. 3.12
Ω Ω
With: W= 1.67
Demand shear strength Va = 206.54 kN
Ratio demand/capacity D/C = 0.31 OK

g. Shear rupture 1
= 0.6 [ − 2( + 1.6)] t = 520.31 kN DG4 Eq. 3.13
Ω Ω
With: W= 2
Demand shear strength Va = 206.54 kN
Ratio demand/capacity D/C = 0.40 OK

3. Weld check
a. Web weld shear strength
- Fillet Welding 1
= 0.6 = 376.23 kN AISC Eq. J2-4
Ω Ω
With: W= 2
2
= (2 − ) = 2596.50 mm² Sec. J2.4
2
- Groove Welding
1
= 0.6 = 0.00 kN
Ω Ω
Weld size W g= 0 mm
= 2W = 0.00 mm²
W= 2.00
Demand shear strength Va = 64.66 kN
Ratio demand/capacity D/C = 0.17 OK

b. Web weld strength to reach yield stress

1 2
=2 0.6 = 18.44 kN/cm AISC Eq. J2-4
Ω Ω 2
With: W= 2
c= 1.5
1
Demand yield stress = = 12.39 kN/cm AISC Eq. J4-1
Ω Ω
Ratio demand/capacity D/C = 0.67 OK

c. Shear yielding 1
= 0.6 = 506.35 kN AISC Eq. J4-3
Ω Ω
With: W= 1.5
Demand shear strength Va = 64.66 kN
Ratio demand/capacity D/C = 0.13 OK

d. Flange weld capacity (external flange)

- Fillet Welding
1
= 0.6 = 346.13 kN AISC Eq. J2-4
Ω Ω
With: W= 2
2
= (2 − ) = 1592.52 mm² Sec. J2.4
2
c= 1.5

120
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT
Designed by LHD
Description MEP 4 4 24 Checked by JCT

- Groove Welding
1
= 0.6 = 163.66 kN
Ω Ω
Weld size W g= 4 mm
= 2W = 1061.68 mm²
W= 1.88
Demand shear strength Va = 354.62 kN
Ratio demand/capacity D/C = 0.70 OK

e. Flange weld capacity (internal flange)

- Fillet Welding
1
= 0.6 = 346.13 kN AISC Eq. J2-4
Ω Ω
With: W= 2
2
= (2 − ) = 1592.52 mm² Sec. J2.4
2
c= 1.5
- Groove Welding
1
= 0.6 = 163.66 kN
Ω Ω
Weld size W g= 4 mm
= 2W = 1061.68 mm²
W= 1.88
Demand shear strength Va = 413.07 kN
Ratio demand/capacity D/C = 0.81 OK

4. Column
a. Flexural yielding (external flange)
1 776.15 kNm DG4 Eq. 3.20
= =
Ω Ω
With: W= 1.67
Y= 6015.78 mm Yield line Meth.
Demand flexural moment Map = 98.46 kNm
Ratio demand/capacity D/C = 0.13 OK

0.9 > Thick plate behavior

Ω Ω
b. Bolt rupture with prying moment strength
Maximum prying force of interior bolts
′
, = −3 = 31.73 kN DG16 Sec 2.5
4 ′
With: ′= /2 − = 65.00 mm

= 25.4 3.682 − 0.085 = 103.55 mm

0.85 + 0.80 ′ +
2 8
= = 111.79 kN
4 ,

121
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT
Designed by LHD
Description MEP 4 4 24 Checked by JCT

Maximum prying force of outer bolts

′
, = −3 = 54.56 kN DG16 Sec 2.5
4 ′
With: ′= /2 − = 65.00 mm

= min ; 25.4 3.682 − 0.085 = 60.00 mm

0.85 + 0.80 ′ +
2 8
= = 114.73 kN
4 ,

[2 − , +2 − , + +2 ]
1 [2 − , +2 ( + + ]
= max = 355.39 kN.m DG16 Sec 2.5
Ω Ω [2 − , + + 2 ( + )]
2 ( + + +

With: W= 2
= = 339.29 kN
4
Tb = 257 kN
Demand flexural moment Man = 0.00 kNm
Ratio demand/capacity D/C = 0.00 NO CHECK

c. Support bolts bearing (external flange)

1
= 2 min( , ( )) + 2( − 1) min( r , ( )) = 645.35 kN AISC Eq. J3-6
Ω Ω 2
Với W= 2
n= 4
= 1.2 = 13263.30 kN
= 1.2 = 0.00 kN
( ) = 2.4 = 645.35 kN
= − /2 = 986.50 mm
= − = 0.00 mm

Demand shear strength Va = 64.66 kN

Ratio demand/capacity D/C = 0.10 OK

d. Flexural yielding (internal flange)

1
= = 502.97 kNm DG4 Eq. 3.20
Ω Ω
With: W= 1.67
Y= 3898.44 mm Tables (4-2…6)
Demand flexural moment Map = 249.43 kNm
Ratio demand/capacity D/C = 0.50 OK

0.9 > Thick plate behavior

Ω Ω

122
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT
Designed by LHD
Description MEP 4 4 24 Checked by JCT

e. Bolt rupture with prying moment strength

Maximum prying force of interior bolts
′
, = −3 = 31.73 kN DG16 Sec 2.5
4 ′
With: ′= /2 − = 65.00 mm

= 25.4 3.682 − 0.085 = 103.55 mm

0.85 + 0.80 ′ +
2 8
= = 111.79 kN
4 ,

Moment strength
1 2( − , )( + )
= max = 257.07 kN.m DG16 Sec 2.5
Ω Ω 2 ( + )
With: W= 2
= = 339.29 kN
4
Tb = 257 kN
Demand flexural moment Map = 0.00 kNm
Ratio demand/capacity D/C = 0.00 NO CHECK

f. Support bolts bearing (internal flange)

1
= 2 min( , ( )) + 2( − 1) min( r , ( )) = 1290.70 kN AISC Eq. J3-6
Ω Ω 2
With: W= 2
n= 4
= 1.2 = 13263.30 kN
= 1.2 = 2594.85 kN
= 2.4 = 645.35 kN
( )
= − /2 = 986.50 mm
= − = 193.00 mm

Demand shear strength Va = 64.66 kN

Ratio demand/capacity D/C = 0.05 OK

123
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT
Designed by LHD
Description MEP 4 4 24 Checked by JCT

5. Panel zone
a. Panel web shear

+ = 515.71 kN Sec. J10

Ω Ω
/Ω = 515.71 kN AISC Eq. J10-11,12
= = 4309.25 kN AISC Sec. J10-6
1 0.00 kN AISC Eq. J10-9
=
0.6 ℎ =
ΩΩ
1
=2 cos = 0.00 kN DG13 Sec. 5.6
Ω Ω
With: W= 1.67
= / 12 = 0.00 mm Sec. E2
= = 0.00 mm² Sec. D3-1
KL/r = 0.00
= = 0.00 kN/cm² Eq. E3-4
( / )
Fcr = 0.00 kN/cm² Eq. E7-3
Demand shear strength Va = 397.08 kN
Ratio demand/capacity D/C = 0.77 OK

b. Local web yielding

+ = 537.45 kN Sec. J10
Ω Ω
With: W= 1.5
1
= [ (6 + 2 ) + ) = 309.55 kN DG4 Eq. 3.24
Ω Ω
Ct = 1.00
k = tfc = 25.00 mm
= +2 = 24.48 mm
1
= [5 + ) = 0.00 kN AISC Eq. J10-2
Ω Ω
1
=2 = 227.90 kN DG13 Eq. 4.3-1
Ω Ω
= ( − )= 552.00 mm² DG13 Sec. 4.3
Demand axial load Pa = 397.08 kN
Ratio demand/capacity D/C = 0.74 OK

6. Transverse stiffeners
a. Yielding strength due to axial load
1
= = 227.90 kN AISC Eq. J4-1
Ω Ω
With: W= 1.67
=2 − = 1104.00 mm² Sec. D3.1
Demand axial load Pa = 103.52 kN
Ratio demand/capacity D/C = 0.45 OK

b. Compression
1
=2 = 158.69 kN AISC Eq. J4.4
Ω Ω
With: W= 1.67
= = 2.31 mm Sec. E2
12
= = 552.00 mm² Sec. D3-1
KL/r = 70.36
= = 39.87 kN/cm² Eq. E3-4
( / )
Fcr = 24.01 kN/cm² Eq. E7-2
Demand axial load Pa = 45.07 kN
Ratio demand/capacity D/C = 0.28 OK

124
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT
Designed by LHD
Description MEP 4 4 24 Checked by JCT

c. Flange weld capacity

1
=2 = 339.35 kN AISC Eq. J2-4
Ω Ω
With: W= 2
L = bst - clip = 69.00 mm Comm. J10.8
= 1 + 0.5(sin( )) = 1.50
= 0.6 = 43.47 kN/cm² Sec. J2.5
2 2
= 2 + = 780.65 mm²
2 2 Sec. J2.4
Demand shear strength Vaf = 103.52 kN
Ratio demand/capacity D/C = 0.31 OK

d. Web weld capacity

1
=4 = 491.81 kN AISC Eq. J2-4
Ω Ω
With: W= 2
L = Ls - clip = 240.00 mm Comm. J10.8
= 1 + 0.5(sin( )) = 1.00
= 0.6 = 28.98 kN/cm² Sec. J2.5
2
= = 848.53 mm² Sec. J2.4
2
Demand shear strength Va = 103.52 kN
Ratio demand/capacity D/C = 0.21 OK

Global critical strength ratio 0.88

125
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT
Designed by LHD
Description RS 4 2 20 AT FRAME K5 Checked by JCT

I. MATERIAL
Bolt
Grade 10.9
Ultimate strength of bolt Fu = 100 kN/cm²
Nominal tensile strength Fnt = 0.75 Fu = 75 kN/cm² (Table J3.2)

Nominal shear strength Fnv = 0.45 Fu = 45 kN/cm² (Table J3.2)

Pretension force Tb = 179 kN

Plate
Material A572 Gr 50
Ultimate tensile strength Fu = 44.8 kN/cm²
Yeild strength Fy = 34.5 kN/cm²

Column, Beam
Material A572 Gr 50
Ultimate tensile strength Fu = 44.8 kN/cm²
Yeild strength Fy = 34.5 kN/cm²
Elastic module E= 20000 kN/cm²
Weld
Weld material E7XT
Weld metal strength FEXX = 48.3 kN/cm²

II. INTERNAL FORCE FOR CALCULATING

Combo Axial (kN) V2 (kN) M33 (kNm)

Negative Moment 26.35 -4.98 -80.83
Positive Moment -7.71 0.68 55.76
Shear 48.35 -16.00 -57.51

III. MEMBERS
Beam section
Height h= 350 mm
Width bf = 184 mm
Web thickness tw = 6 mm
Flange thickness tf = 8 mm
Is apex
Vertical angle i= 20.1 %
Include flange stiffener
Thickness for flange stiffener ts = 8 mm

IV. END PLATE

Connector
Plate extension Extended both ways
Plate thickness tp = 14 mm
Plate width B= 184 mm

Weld
Flange weld size Wf = 8 mm
Web weld size Ww = 6 mm

126
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT
Designed by LHD
Description RS 4 2 20 AT FRAME K5 Checked by JCT

Bolts
Type M20
Gage - tranverse center-to-center spacing g= 100 mm
Vertical edge distance Lev = 50 mm
Horizontal edge distance Leh = 42 mm

Bolt group (external extension)

Distance from bolt rows to flange pf,o = 50 mm

Bolt group (external flange)

Bolts rows number 1
Distance from bolt rows to flange C= 175 mm
Vertical spacing between inner bolt rows p = 0 mm
pf,i = 167 mm

Bolt group (internal flange)

Bolts rows number 0
Distance from bolt rows to flange C= 175 mm
Vertical spacing between inner bolt rows p = 0 mm
pf,i = 167 mm

Bolt group (internal extension)

Distance from bolt rows to flange pf,o = 50 mm

V. DESIGN CHECK
1. Moment end plate (external flange)
a. Flexural yielding
1
= = 136.09 kNm DG16 Sec 2.5
Ω Ω
With: W= 1.67
gr = 1
Y= 3363.59 mm Tables (4-2…6)
Demand flexural moment Man = 85.51 kNm
Ratio demand/capacity D/C = 0.63 OK

b. No prying bolt moment strength

1
= 2 ( )= 136.86 kNm DG16 Sec 2.5
With:
Ω Ω W= 2

= = 235.62 kN
4
= 581 mm
Demand flexural moment Man = 85.51 kNm
Ratio demand/capacity D/C = 0.62 OK

0.9 < Thin plate behavior

Ω Ω

127
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT
Designed by LHD
Description RS 4 2 20 AT FRAME K5 Checked by JCT

c. Bolt rupture with prying moment strength

Maximum prying force of interior bolts
′
, = −3 = 39.37 kN DG16 Sec 2.5
4 ′
With: ′= /2 − = 70.00 mm

= 25.4 3.682 − 0.085 = 29.92 mm

0.85 + 0.80 ′ +
2 8
= = 17.12 kN
4 ,
Maximum prying force of outer bolts
′
, = −3 = 37.79 kN DG16 Sec 2.5
4 ′
With: ′= /2 − = 70.00 mm

= min ; 25.4 3.682 − 0.085 = 29.92 mm

0.85 + 0.80 ′ +
2 8
= = 57.12 kN
4 ,
Moment strength
[2 − , +2 − , + +2 ]
1 [2 − , +2 ( + + ]
= max = 114.63 kN.m DG16 Sec 2.5
Ω Ω [2 − , + + 2 ( + )]
2 ( + + +
Với W= 2
= = 235.62 kN
4
Tb = 179 kN
Demand flexural moment Man = 85.51 kNm
Ratio demand/capacity D/C = 0.75 OK

d. Bolts shear
1
= = 282.74 kN AISC Eq. J3-1
Ω Ω 4
With: W= 2
n= 4
Demand shear strength Va = 0.8571692 kN
Ratio demand/capacity D/C = 0.00 OK

128
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT
Designed by LHD
Description RS 4 2 20 AT FRAME K5 Checked by JCT

e. Bolts bearing under shear load

1
= 2 min( , ( )) + 2( − 1) min( r , ( )) = 293.63 kN AISC Eq. J3-6
Ω Ω 2
With: W= 2
n= 4
= 1.2 = 293.63 kN
= 1.2 = 0.00 kN
( ) = 2.4 = 301.16 kN
= − /2 = 39.00 mm
= − = 0.00 mm

Demand shear strength Va = 6.16 kN

Ratio demand/capacity D/C = 0.02 OK

f. Shear yielding 1
= 0.6 = 319.06 kN DG4 Eq. 3.12
Ω Ω
With: W= 1.67
Demand shear strength Va = 122.56 kN
Ratio demand/capacity D/C = 0.38 OK

g. Shear rupture
1
= 0.6 [ − 2( + 1.6)] t = 257.49 kN DG4 Eq. 3.13
Ω Ω
With: W= 2
Demand shear strength Va = 122.56 kN
Ratio demand/capacity D/C = 0.48 OK

2. Moment end plate (internal flange)

a. Flexural yielding
1
= = 74.40 kNm DG16 Sec 2.5
Ω Ω
With: W= 1.67
gr = 1
Y= 1838.92 mm Tables (4-2…6)
Demand flexural moment Map = 54.414442 kNm
Ratio demand/capacity D/C = 0.73 OK

b. No prying bolt moment strength

1
= 2 ( )= 94.94 kNm DG16 Sec 2.5
Ω Ω
With: W= 2
= = 235.62 kN
4
= 402.92 mm

Demand flexural moment Map = 54.414442 kNm

Ratio demand/capacity D/C = 0.57 OK

0.9 < Thin plate behavior

Ω Ω

129
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT
Designed by LHD
Description RS 4 2 20 AT FRAME K5 Checked by JCT

c. Bolt rupture with prying moment strength

Maximum prying force of interior bolts
′
, = −3 = 39.37 kN DG16 Sec 2.5
4 ′
With: ′= /2 − = 70.00 mm
= 25.4 3.682 − 0.085 =
29.92 mm

0.85 + 0.80 ′ +
2 8
= = 17.12 kN
4 ,

Maximum prying force of outer bolts

′
, = −3 = 37.79 kN DG16 Sec 2.5
4 ′
With: ′= /2 − = 70.00 mm

= min ; 25.4 3.682 − 0.085 = 29.92 mm

0.85 + 0.80 ′ +
2 8
= = 57.12 kN
4 ,
Moment strength
[2 − , +2 − , + +2 ]
1 [2 − , +2 ( + + ]
= max = 79.71 kN.m DG16 Sec 2.5
Ω Ω [2 − , + + 2 ( + )]
2 ( + + +
With: W= 2
= = 235.62 kN
4
Tb = 179 kN

Demand flexural moment Map = 54.41 kNm

Ratio demand/capacity D/C = 0.68 OK

d. Bolts shear 1
= = 141.37 kN AISC J3-1
Ω Ω 4
With: W= 2
n= 2
Demand shear strength Va = 6.1578863 kN
Ratio demand/capacity D/C = 0.04 OK

130
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT
Designed by LHD
Description RS 4 2 20 AT FRAME K5 Checked by JCT

e. Bolts bearing under shear load

1
= 2 min( , ( )) + 2( − 1) min( r , ( )) = 293.63 kN AISC Eq. J3-6
Ω Ω 2
With: W= 2
n= 2
= 1.2 = 293.63 kN
= 1.2 = 0.00 kN
( ) = 2.4 = 301.16 kN
= − /2 = 39.00 mm
= − = 0.00 mm

Demand shear strength Va = 6.16 kN

Ratio demand/capacity D/C = 0.02 OK

f. Shear yielding 1
= 0.6 = 319.06 kN DG4 Eq. 3.12
Ω Ω
With: W= 1.67
Demand shear strength Va = 109.15 kN
Ratio demand/capacity D/C = 0.34 OK

g. Shear rupture 1
= 0.6 [ − 2( + 1.6)] t = 257.49 kN DG4 Eq. 3.13
Ω Ω
With: W= 2
Demand shear strength Va = 109.15 kN
Ratio demand/capacity D/C = 0.42 OK

3. Weld check
a. Web weld shear strength
- Fillet Welding 1
= 0.6 = 219.47 kN AISC Eq. J2-4
Ω Ω
With: W= 2
2
= (2 − ) = 1514.62 mm² Sec. J2.4
2
- Groove Welding
1
= 0.6 = 0.00 kN
Ω Ω
Weld size W g= 0 mm
= 2W = 0.00 mm²
W= 2.00
Demand shear strength Va = 6.16 kN
Ratio demand/capacity D/C = 0.03 OK

b. Web weld strength to reach yield stress

1 2
=2 0.6 = 18.44 kN/cm AISC Eq. J2-4
Ω Ω 2
With: W= 2
c= 1.5
1
= = 12.39 kN/cm AISC Eq. J4-1
Demand yield stress Ω Ω
Ratio demand/capacity D/C = 0.67 OK

131
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT
Designed by LHD
Description RS 4 2 20 AT FRAME K5 Checked by JCT

c. Shear yielding 1
= 0.6 = 295.37 kN AISC Eq. J4-3
Ω Ω
With: W= 1.5
Demand shear strength Va = 6.16 kN
Ratio demand/capacity D/C = 0.02 OK

d. Flange weld capacity (external flange)

- Fillet Welding
1
= 0.6 = 346.13 kN AISC Eq. J2-4
Ω Ω
With: W= 2
2
= (2 − ) = 1592.52 mm² Sec. J2.4
2
c= 1.5
- Groove Welding
1
= 0.6 = 163.66 kN
Ω Ω
Weld size W g= 4 mm
= 2W = 1061.68 mm²
W= 1.88
Demand shear strength Va = 245.12 kN
Ratio demand/capacity D/C = 0.48 OK

e. Flange weld capacity (internal flange)

- Fillet Welding
1
= 0.6 = 346.13 kN AISC Eq. J2-4
Ω Ω
With: W= 2
2
= (2 − ) = 1592.52 mm² Sec. J2.4
2
c= 1.5
- Groove Welding
1
= 0.6 = 163.66 kN
Ω Ω
Weld size W g= 4 mm
= 2W = 1061.68 mm²
W= 1.88
Demand shear strength Va = 218.31 kN
Ratio demand/capacity D/C = 0.43 OK

Global critical strength ratio 0.75

132
 Số báo giá PHL.T3.25.21 Hạng mục POWERHOUSE Bản số 00
Ngày 11/2021
Dự án CATAINGAN PROJECT
Thiết kế LHD
Phần MEP 4 2 16 Kiểm JCT

I. VẬT LIỆU
Bu lông
Cấp độ bền 10.9
Giới hạn bền Fu = 100 kN/cm²
Cường độ chịu kéo danh nghĩa Fnt = 0.75 Fu = 75 kN/cm² (Table J3.2)
Cường độ cắt danh nghĩa Fnv = 0.45 Fu = 45 kN/cm² (Table J3.2)
Lực căng trước trong bu lông Tb = 114 kN

Bản bích
Vật liệu A572 Gr 50
Giới hạn bền Fu = 44.8 kN/cm²
Giới hạn chảy Fy = 34.5 kN/cm²

Cột, dầm
Vật liệu A572 Gr 50
Giới hạn bền Fu = 44.8 kN/cm²
Giới hạn chảy Fy = 34.5 kN/cm²
Modul đàn hồi E= 20000 kN/cm²
Đường hàn
Que hàn E7XT
Cường độ thép hàn FEXX = 48.3 kN/cm²

II. NỘI LỰC

Dầm
Combo Axial (kN) V2 (kN) M33 (kNm)
Moment âm 1.01 6.01 -4.11
Moment dương 0.20 -14.71 10.07
Lực cắt 0.20 -14.71 10.07

Dầm bên đối diện

Combo Axial (kN) V2 (kN) M33 (kNm)
Moment âm -47.52 -27.56 -25.22
Moment dương 58.58 39.36 34.64

Cột
Combo Axial (kN) V2 (kN) M33 (kNm)
Moment âm -41.19 42.22 -21.11
Moment dương 52.04 -56.08 27.31

III. KÍCH THƯỚC CỘT, DẦM

Kích thước cột
Chiều cao tiết diện h= 228 mm
Chiều rộng cánh bf = 164 mm
Chiều dày bụng tw = 5 mm
Chiều dày cánh tf = 12 mm
Đỉnh cột

Kích thước dầm

Chiều cao tiết diện h= 384 mm
Chiều rộng cánh bf = 164 mm
Chiều dày bụng tw = 5 mm
Chiều dày cánh tf = 6 mm
Độ dốc i= 16.95 %
Tăng cứng
Chiều dày tăng cứng ts = 8 mm
Dầm bên đối diện

133
 Số báo giá PHL.T3.25.21 Hạng mục POWERHOUSE Bản số 00
Ngày 11/2021
Dự án CATAINGAN PROJECT
Thiết kế LHD
Phần MEP 4 2 16 Kiểm JCT

IV. BẢN BÍCH

Bích liên kết
Kiểu mở rộng Extended internal edge
Chiều dày bích tp = 12 mm
Chiều rộng bích B= 164 mm

Đường hàn
Chiều cao đường hàn cánh Wf = 6 mm
Chiều cao đường hàn bụng Ww = 5 mm

Bu lông
Loại bulông M16
Khoảng cách giữa 2 dãy bu lông g= 100 mm
Khoảng cách mép dọc Lev = 50 mm
Khoảng cách mép ngang Leh = 32 mm

Nhóm bu lông (cánh ngoài)

Số hàng bu lông phía trong 1
Khoảng cách từ hàng bu lông đến cánh C= 60 mm
Khoảng cách giữa các hàng bu lông phía trong p = 0 mm
pf,i = 54 mm

Nhóm bu lông (cánh trong)

Số hàng bu lông phía trong 1
Khoảng cách từ hàng bu lông đến cánh C= 60 mm
Khoảng cách giữa các hàng bu lông phía trong p = 0 mm
pf,i = 54 mm

Nhóm bu lông (phần mở rộng)

Khoảng cách bu lông đến mép cánh pf,o = 50 mm

Sườn ngang
Sườn toàn bộ bụng
Chiều dài Ls = 250 mm
Chiều rộng bs = 69.5 mm
Chiều dày ts = 8 mm
Vát góc cc = 10 mm
Chiều cao đường hàn bụng W sw = 3 mm
Chiều cao đường hàn cánh W sf = 8 mm
Tăng cứng cho bụng cột
Loại tăng cứng Without stiffener

134
 Số báo giá PHL.T3.25.21 Hạng mục POWERHOUSE Bản số 00
Ngày 11/2021
Dự án CATAINGAN PROJECT
Thiết kế LHD
Phần MEP 4 2 16 Kiểm JCT

V. KIỂM TRA THIẾT KẾ

1. Bản bích ở cánh trên dầm
a. Uốn dẻo bản bích
1
= = 40.37 kNm DG16 Sec 2.5
Ω Ω
Với: W= 1.67
gr = 1.25
Y= 1697.56 mm Tables (4-2…6)
Momen uốn yêu cầu Man = 4.50 kNm
Tỉ số ứng suất D/C = 0.11 OK

b. Cường độ chịu uốn với bu lông không lực nhổ

1
= 2 ( )= 49.23 kNm DG16 Sec 2.5
Ω Ω W= 2
Với:

= = 150.80 kN
4
= 326 mm
Momen uốn yêu cầu Man = 4.50 kNm
Tỉ số ứng suất D/C = 0.09 OK

0.9 < Thin plate behavior

Ω Ω
c. Cường độ chịu uốn với bu lông có lực nhổ
Lực nhổ lớn nhất của bu lông phía trong
′
, = −3 = 20.78 kN DG16 Sec 2.5
4 ′
Với ′= /2 − = 64.00 mm

= 25.4 3.682 − 0.085 = 37.30 mm

0.85 + 0.80 ′ +
2 8
= = 33.42 kN
4 ,
Cường độ chịu moment
1 2( − , )( + )
= max = 42.44 kN.m DG16 Sec 2.5
Ω Ω 2 ( + )
Với W= 2
= = 150.80 kN
4
Tb = 114 kN
Momen uốn yêu cầu Man = 4.50 kNm
Tỉ số ứng suất D/C = 0.11 OK

135
 Số báo giá PHL.T3.25.21 Hạng mục POWERHOUSE Bản số 00
Ngày 11/2021
Dự án CATAINGAN PROJECT
Thiết kế LHD
Phần MEP 4 2 16 Kiểm JCT

d. Cắt bu lông
1
= = 90.48 kN AISC Eq. J3-1
Ω Ω 4
Với W= 2
n= 2
Lực cắt yêu cầu Va = 14.536058 kN
Tỉ số ứng suất D/C = 0.16 OK

e. Cường độ chịu ép mặt

1
= 2 min( , ( )) + 2( − 1) min( r , ( )) = 206.51 kN AISC Eq. J3-6
Ω Ω 2
Với W= 2
n= 2
= 1.2 = 264.59 kN
= 1.2 = 0.00 kN
( ) = 2.4 = 206.51 kN
= − /2 = 41.00 mm
= − = 0.00 mm

Lực cắt yêu cầu Va = 14.54 kN

Tỉ số ứng suất D/C = 0.07 OK

f. Cắt dẻo tấm bích 1

= 0.6 = 243.75 kN DG4 Eq. 3.12
Ω Ω
Với W= 1.67
Lực cắt yêu cầu Va = 13.70 kN
Tỉ số ứng suất D/C = 0.06 OK

g. Cắt đứt tấm bích

1
= 0.6 [ − 2( + 1.6)] t = 201.35 kN DG4 Eq. 3.13
Ω Ω
Với W= 2
Lực cắt yêu cầu Va = 13.70 kN
Tỉ số ứng suất D/C = 0.07 OK

2. Bản bích ở cánh dưới dầm

a. Uốn dẻo bản bích
1
= = 106.32 kNm DG16 Sec 2.5
Ω Ω
Với W= 1.67
gr = 1
Y= 3576.62 mm Tables (4-2…6)
Momen uốn yêu cầu Map = 9.6340908 kNm
Tỉ số ứng suất D/C = 0.09 OK

b. Cường độ chịu uốn với bu lông không lực nhổ

1
= 2 ( )= 115.04 kNm DG16 Sec 2.5
Ω Ω
Với W= 2
= = 150.80 kN
4
= 762.87 mm

Momen uốn yêu cầu Map = 9.6340908 kNm

Tỉ số ứng suất D/C = 0.08 OK

0.9 < Thin plate behavior

Ω Ω

136
 Số báo giá PHL.T3.25.21 Hạng mục POWERHOUSE Bản số 00
Ngày 11/2021
Dự án CATAINGAN PROJECT
Thiết kế LHD
Phần MEP 4 2 16 Kiểm JCT

c. Cường độ chịu uốn với bu lông có lực nhổ

Lực nhổ lớn nhất của bu lông phía trong
′
, = −3 = 20.78 kN DG16 Sec 2.5
4 ′
Với ′= /2 − = 64.00 mm
= 25.4 3.682 − 0.085 =
37.30 mm

0.85 + 0.80 ′ +
2 8
= = 33.42 kN
4 ,

Lực nhổ lớn nhất cho các bu lông ở cánh ngoài cột
′
, = −3 = 20.70 kN DG16 Sec 2.5
4 ′
Với ′= /2 − = 64.00 mm

= min ; 25.4 3.682 − 0.085 = 37.30 mm

0.85 + 0.80 ′ +
2 8
= = 36.04 kN
4 ,
Cường độ chịu moment
[2 − , +2 − , + +2 ]
1 [2 − , +2 ( + + ]
= max = 99.22 kN.m DG16 Sec 2.5
Ω Ω [2 − , + + 2 ( + )]
2 ( + + +

Với W= 2
= = 150.80 kN
4
Tb = 114 kN

Momen uốn yêu cầu Map = 9.63 kNm

Tỉ số ứng suất D/C = 0.10 OK

d. Cắt bu lông 1
= = 180.96 kN AISC J3-1
Ω Ω 4
Với W= 2
n= 4
Lực cắt yêu cầu Va = 5.7558761 kN
Tỉ số ứng suất D/C = 0.03 OK

e. Cường độ chịu ép mặt

1
= 2 min( , ( )) + 2( − 1) min( r , ( )) = 206.51 kN AISC Eq. J3-6
Ω Ω 2
Với W= 2
n= 4
= 1.2 = 264.59 kN
= 1.2 = 0.00 kN
( ) = 2.4 = 206.51 kN
= − /2 = 41.00 mm
= − = 0.00 mm

Lực cắt yêu cầu Va = 14.54 kN

Tỉ số ứng suất D/C = 0.07 OK

137
 Số báo giá PHL.T3.25.21 Hạng mục POWERHOUSE Bản số 00
Ngày 11/2021
Dự án CATAINGAN PROJECT
Thiết kế LHD
Phần MEP 4 2 16 Kiểm JCT

f. Cắt dẻo tấm bích 1

= 0.6 = 243.75 kN DG4 Eq. 3.12
Ω Ω
Với W= 1.67
Lực cắt yêu cầu Va = 12.56 kN
Tỉ số ứng suất D/C = 0.05 OK

g. Cắt đứt tấm bích 1

= 0.6 [ − 2( + 1.6)] t = 201.35 kN DG4 Eq. 3.13
Ω Ω
Với W= 2
Lực cắt yêu cầu Va = 12.56 kN
Tỉ số ứng suất D/C = 0.06 OK

3. Kiểm tra đường hàn bản bích

a. Cường độ đường hàn bụng
- Đường hàn góc 1
= 0.6 = 199.53 kN AISC Eq. J2-4
Ω Ω
Với W= 2
2
= (2 − ) = 1377.01 mm² Sec. J2.4
2
- Đường hàn rãnh
1
= 0.6 = 0.00 kN
Ω Ω
Chiều cao đường hàn W g= 0 mm
= 2W = 0.00 mm²
W= 2.00
Lực cắt yêu cầu Va = 14.54 kN
Tỉ số ứng suất D/C = 0.07 OK

b. Điều kiện chảy dẻo bụng

1 2
=2 0.6 = 15.37 kN/cm AISC Eq. J2-4
Ω Ω 2
Với W= 2
c= 1.5
1
Lực cắt yêu cầu = = 10.32 kN/cm AISC Eq. J4-1
Ω Ω
Tỉ số ứng suất D/C = 0.67 OK

c. Chảy dẻo do cắt 1

= 0.6 = 268.54 kN AISC Eq. J4-3
Ω Ω
Với W= 1.5
Lực cắt yêu cầu Va = 14.54 kN
Tỉ số ứng suất D/C = 0.05 OK

d. Cường độ đường hàn cánh phía trên

- Đường hàn góc
1
= 0.6 = 306.78 kN AISC Eq. J2-4
Ω Ω
Với W= 2
2
= (2 − ) = 1411.43 mm² Sec. J2.4
2
c= 1.5

138
 Số báo giá PHL.T3.25.21 Hạng mục POWERHOUSE Bản số 00
Ngày 11/2021
Dự án CATAINGAN PROJECT
Thiết kế LHD
Phần MEP 4 2 16 Kiểm JCT

- Đường hàn rãnh

1
= 0.6 = 0.00 kN
Ω Ω
Chiều cao đường hàn W g= 0 mm
= 2W = 0.00 mm²
W= 1.88
Lực cắt yêu cầu Va = 27.39 kN
Tỉ số ứng suất D/C = 0.09 OK

e. Cường độ đường hàn cánh phía dưới

- Đường hàn góc
1
= 0.6 = 306.78 kN AISC Eq. J2-4
Ω Ω
Với W= 2
2
= (2 − ) = 1411.43 mm² Sec. J2.4
2
c= 1.5
- Đường hàn rãnh
1
= 0.6 = 0.00 kN
Ω Ω
Chiều cao đường hàn W g= 0 mm
= 2W = 0.00 mm²
W= 1.88
Lực cắt yêu cầu Va = 25.13 kN
Tỉ số ứng suất D/C = 0.08 OK

4. Cột
a. Uốn dẻo cánh cột (cánh trên)
1 50.60 kNm DG4 Eq. 3.20
= =
Ω Ω
Với W= 1.67
Y= 1702.30 mm Yield line Meth.
Momen uốn yêu cầu Map = 4.50 kNm
Tỉ số ứng suất D/C = 0.09 OK

0.9 < Thin plate behavior

Ω Ω
b. Cường độ chịu uốn với bu lông có lực nhổ
Lực nhổ lớn nhất của bu lông phía trong
′
, = −3 = 20.78 kN DG16 Sec 2.5
4 ′
Với ′= /2 − = 64.00 mm

= 25.4 3.682 − 0.085 = 37.30 mm

0.85 + 0.80 ′ +
2 8
= = 33.42 kN
4 ,

139
 Số báo giá PHL.T3.25.21 Hạng mục POWERHOUSE Bản số 00
Ngày 11/2021
Dự án CATAINGAN PROJECT
Thiết kế LHD
Phần MEP 4 2 16 Kiểm JCT

Cường độ chịu moment

1 2( − , )( + )
= max = 42.44 kN.m DG16 Sec 2.5
Ω Ω 2 ( + )
Với W= 2
= = 150.80 kN
4
Tb = 114 kN
Momen uốn yêu cầu Man = 4.50 kNm
Tỉ số ứng suất D/C = 0.11 OK

c. Cường độ chịu ép mặt (cánh trên)

1
= 2 min( , ( )) + 2( − 1) min( r , ( )) = 206.51 kN AISC Eq. J3-6
Ω Ω 2
Với W= 2
n= 2
= 1.2 = 6395.42 kN
= 1.2 = 0.00 kN
( ) = 2.4 = 206.51 kN
= − /2 = 991.00 mm
= − = 0.00 mm

Lực cắt yêu cầu Va = 14.54 kN

Tỉ số ứng suất D/C = 0.07 OK

d. Uốn dẻo cánh cột (cánh dưới)

1
= = 118.72 kNm DG4 Eq. 3.20
Ω Ω
Với W= 1.67
Y= 3993.79 mm Tables (4-2…6)
Momen uốn yêu cầu Map = 9.63 kNm
Tỉ số ứng suất D/C = 0.08 OK

0.9 < Thin plate behavior

Ω Ω

140
 Số báo giá PHL.T3.25.21 Hạng mục POWERHOUSE Bản số 00
Ngày 11/2021
Dự án CATAINGAN PROJECT
Thiết kế LHD
Phần MEP 4 2 16 Kiểm JCT

c. Cường độ chịu uốn với bu lông có lực nhổ

Lực nhổ lớn nhất của bu lông phía trong
′
, = −3 = 20.78 kN DG16 Sec 2.5
4 ′
Với ′= /2 − = 64.00 mm

= 25.4 3.682 − 0.085 = 37.30 mm

0.85 + 0.80 ′ +
2 8
= = 33.42 kN
4 ,

Lực nhổ lớn nhất cho các bu lông ở cánh ngoài cột
′
, = −3 = 20.70 kN DG16 Sec 2.5
4 ′
Với ′= /2 − = 64.00 mm

= min ; 25.4 3.682 − 0.085 = 37.30 mm

0.85 + 0.80 ′ +
2 8
= = 36.04 kN
4 ,

Cường độ chịu moment

[2 − , +2 − , + +2 ]
1 [2 − , +2 ( + + ]
= max = 99.22 kN.m DG16 Sec 2.5
Ω Ω [2 − , + + 2 ( + )]
2 ( + + +

Với W= 2
= = 150.80 kN
4
Tb = 114 kN
Momen uốn yêu cầu Map = 9.63 kNm
Tỉ số ứng suất D/C = 0.10 OK

f. Cường độ chịu ép mặt (cánh dưới)

1
= 2 min( , ( )) + 2( − 1) min( r , ( )) = 206.51 kN AISC Eq. J3-6
Ω Ω 2
Với W= 2
n= 4
= 1.2 = 6395.42 kN
= 1.2 = 0.00 kN
= 2.4 = 206.51 kN
( )
= − /2 = 991.00 mm
= − = 0.00 mm

Lực cắt yêu cầu Va = 14.54 kN

Tỉ số ứng suất D/C = 0.07 OK

141
 Số báo giá PHL.T3.25.21 Hạng mục POWERHOUSE Bản số 00
Ngày 11/2021
Dự án CATAINGAN PROJECT
Thiết kế LHD
Phần MEP 4 2 16 Kiểm JCT

5. Kiểm tra vùng bụng cột

a. Cắt cục bộ bụng cột

+ = 163.73 kN Sec. J10

Ω Ω
/Ω = 163.73 kN AISC Eq. J10-11,12
= = 1708.53 kN AISC Sec. J10-6
1 0.00 kN AISC Eq. J10-9
=
0.6 ℎ =
ΩΩ
1
=2 cos = 0.00 kN DG13 Sec. 5.6
Ω Ω
Với: W= 1.67
= / 12 = 0.00 mm Sec. E2
= = 0.00 mm² Sec. D3-1
KL/r = 0.00
= = 0.00 kN/cm² Eq. E3-4
( / )
Fcr = 0.00 kN/cm² Eq. E7-3
Lực cắt yêu cầu Va = 38.26 kN
Tỉ số ứng suất D/C = 0.23 OK

b. Chảy dẻo cục bộ bản bụng

+ = 327.82 kN Sec. J10
Ω Ω
Với: W= 1.5
1
= [ (6 + 2 ) + ) = 131.30 kN DG4 Eq. 3.24
Ω Ω
Ct = 1.00
k = tfc = 12.00 mm
= +2 = 18.26 mm
1
= [5 + ) = 0.00 kN AISC Eq. J10-2
Ω Ω
1
=2 = 196.52 kN DG13 Eq. 4.3-1
Ω Ω
= ( − )= 476.00 mm² DG13 Sec. 4.3
Lực dọc yêu cầu Pa = 38.26 kN
Tỉ số ứng suất D/C = 0.12 OK

6. Sườn ngang
a. Chảy dẻo do kéo
1
= = 196.52 kN AISC Eq. J4-1
Ω Ω
Với: W= 1.67
=2 − = 952.00 mm² Sec. D3.1
Lực dọc yêu cầu Pa = -106.17 kN
Tỉ số ứng suất D/C = 0.00 OK

b. Kiểm tra nén

1
=2 = 136.85 kN AISC Eq. J4.4
Ω Ω
Với: W= 1.67
= = 2.31 mm Sec. E2
12
= = 476.00 mm² Sec. D3-1
KL/r = 70.36
= = 39.87 kN/cm² Eq. E3-4
( / )
Fcr = 24.01 kN/cm² Eq. E7-2
Lực dọc yêu cầu Pa = 0.00 kN
Tỉ số ứng suất D/C = 0.00 OK

142
 Số báo giá PHL.T3.25.21 Hạng mục POWERHOUSE Bản số 00
Ngày 11/2021
Dự án CATAINGAN PROJECT
Thiết kế LHD
Phần MEP 4 2 16 Kiểm JCT

c. Cường độ đường hàn cánh

1
=2 = 292.63 kN AISC Eq. J2-4
Ω Ω
Với: W= 2
L = bst - clip = 59.50 mm Comm. J10.8
= 1 + 0.5(sin( )) = 1.50
= 0.6 = 43.47 kN/cm² Sec. J2.5
2 2
= 2 + = 673.17 mm²
2 2 Sec. J2.4
Momen uốn yêu cầu Vaf = 0.00 kN
Tỉ số ứng suất D/C = 0.00 OK

d. Cường độ đường hàn bụng

1
=4 = 295.08 kN AISC Eq. J2-4
Ω Ω
Với: W= 2
L = Ls - clip = 240.00 mm Comm. J10.8
= 1 + 0.5(sin( )) = 1.00
= 0.6 = 28.98 kN/cm² Sec. J2.5
2
= = 509.12 mm² Sec. J2.4
2
Lực cắt yêu cầu Va = 0.00 kN
Tỉ số ứng suất D/C = 0.00 OK

Tỉ số ứng suất max 0.67

143
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT
Designed by LHD
Description RS 4 4 20 AT FRAME K2 Checked by JCT

I. MATERIAL
Bolt
Grade 10.9
Ultimate strength of bolt Fu = 100 kN/cm²
Nominal tensile strength Fnt = 0.75 Fu = 75 kN/cm² (Table J3.2)

Nominal shear strength Fnv = 0.45 Fu = 45 kN/cm² (Table J3.2)

Pretension force Tb = 179 kN

Plate
Material A572 Gr 50
Ultimate tensile strength Fu = 44.8 kN/cm²
Yeild strength Fy = 34.5 kN/cm²

Column, Beam
Material A572 Gr 50
Ultimate tensile strength Fu = 44.8 kN/cm²
Yeild strength Fy = 34.5 kN/cm²
Elastic module E= 20000 kN/cm²
Weld
Weld material E7XT
Weld metal strength FEXX = 48.3 kN/cm²

II. INTERNAL FORCE FOR CALCULATING

Combo Axial (kN) V2 (kN) M33 (kNm)

Negative Moment 61.23 -5.92 -58.52
Positive Moment -41.75 6.81 53.83
Shear 62.90 -16.41 -46.04

III. MEMBERS
Beam section
Height h= 384 mm
Width bf = 164 mm
Web thickness tw = 5 mm
Flange thickness tf = 6 mm
Is apex
Include flange stiffener
Thickness for flange stiffener ts = 8 mm

IV. END PLATE

Connector
Plate extension Extended both ways
Plate thickness tp = 14 mm
Plate width B= 164 mm

Weld
Flange weld size Wf = 6 mm
Web weld size Ww = 5 mm

144
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT
Designed by LHD
Description RS 4 4 20 AT FRAME K2 Checked by JCT

Bolts
Type M20
Gage - tranverse center-to-center spacing g= 100 mm
Vertical edge distance Lev = 50 mm
Horizontal edge distance Leh = 32 mm

Bolt group (external extension)

Distance from bolt rows to flange pf,o = 50 mm

Bolt group (external flange)

Bolts rows number 1
Distance from bolt rows to flange C= 192 mm
Vertical spacing between inner bolt rows p = 0 mm
pf,i = 186 mm

Bolt group (internal flange)

Bolts rows number 0
Distance from bolt rows to flange C= 192 mm
Vertical spacing between inner bolt rows p = 0 mm
pf,i = 186 mm

Bolt group (internal extension)

Distance from bolt rows to flange pf,o = 50 mm

V. DESIGN CHECK
1. Moment end plate (external flange)
a. Flexural yielding
1
= = 140.24 kNm DG16 Sec 2.5
Ω Ω
With: W= 1.67
gr = 1
Y= 3466.12 mm Tables (4-2…6)
Demand flexural moment Man = 70.10 kNm
Ratio demand/capacity D/C = 0.50 OK

b. No prying bolt moment strength

1
= 2 ( )= 146.08 kNm DG16 Sec 2.5
With:
Ω Ω W= 2

= = 235.62 kN
4
= 620 mm
Demand flexural moment Man = 70.10 kNm
Ratio demand/capacity D/C = 0.48 OK

0.9 < Thin plate behavior

Ω Ω

145
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT
Designed by LHD
Description RS 4 4 20 AT FRAME K2 Checked by JCT

c. Bolt rupture with prying moment strength

Maximum prying force of interior bolts
′
, = −3 = 33.76 kN DG16 Sec 2.5
4 ′
With: ′= /2 − = 60.00 mm

= 25.4 3.682 − 0.085 = 29.92 mm

0.85 + 0.80 ′ +
2 8
= = 13.86 kN
4 ,
Maximum prying force of outer bolts
′
, = −3 = 32.23 kN DG16 Sec 2.5
4 ′
With: ′= /2 − = 60.00 mm

= min ; 25.4 3.682 − 0.085 = 29.92 mm

0.85 + 0.80 ′ +
2 8
= = 51.55 kN
4 ,
Moment strength
[2 − , +2 − , + +2 ]
1 [2 − , +2 ( + + ]
= max = 125.81 kN.m DG16 Sec 2.5
Ω Ω [2 − , + + 2 ( + )]
2 ( + + +
Với W= 2
= = 235.62 kN
4
Tb = 179 kN
Demand flexural moment Man = 70.10 kNm
Ratio demand/capacity D/C = 0.56 OK

d. Bolts shear
1
= = 282.74 kN AISC Eq. J3-1
Ω Ω 4
With: W= 2
n= 4
Demand shear strength Va = 6.805 kN
Ratio demand/capacity D/C = 0.02 OK

146
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT
Designed by LHD
Description RS 4 4 20 AT FRAME K2 Checked by JCT

e. Bolts bearing under shear load

1
= 2 min( , ( )) + 2( − 1) min( r , ( )) = 293.63 kN AISC Eq. J3-6
Ω Ω 2
With: W= 2
n= 4
= 1.2 = 293.63 kN
= 1.2 = 0.00 kN
( ) = 2.4 = 301.16 kN
= − /2 = 39.00 mm
= − = 0.00 mm

Demand shear strength Va = 16.41 kN

Ratio demand/capacity D/C = 0.06 OK

f. Shear yielding 1
= 0.6 = 284.38 kN DG4 Eq. 3.12
Ω Ω
With: W= 1.67
Demand shear strength Va = 92.72 kN
Ratio demand/capacity D/C = 0.33 OK

g. Shear rupture
1
= 0.6 [ − 2( + 1.6)] t = 219.85 kN DG4 Eq. 3.13
Ω Ω
With: W= 2
Demand shear strength Va = 92.72 kN
Ratio demand/capacity D/C = 0.42 OK

2. Moment end plate (internal flange)

a. Flexural yielding
1
= = 75.16 kNm DG16 Sec 2.5
Ω Ω
With: W= 1.67
gr = 1
Y= 1857.66 mm Tables (4-2…6)
Demand flexural moment Map = 45.937839 kNm
Ratio demand/capacity D/C = 0.61 OK

b. No prying bolt moment strength

1
= 2 ( )= 101.55 kNm DG16 Sec 2.5
Ω Ω
With: W= 2
= = 235.62 kN
4
= 431.00 mm

Demand flexural moment Map = 45.937839 kNm

Ratio demand/capacity D/C = 0.45 OK

0.9 < Thin plate behavior

Ω Ω

147
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT
Designed by LHD
Description RS 4 4 20 AT FRAME K2 Checked by JCT

c. Bolt rupture with prying moment strength

Maximum prying force of interior bolts
′
, = −3 = 33.76 kN DG16 Sec 2.5
4 ′
With: ′= /2 − = 60.00 mm
= 25.4 3.682 − 0.085 =
29.92 mm

0.85 + 0.80 ′ +
2 8
= = 13.86 kN
4 ,

Maximum prying force of outer bolts

′
, = −3 = 32.23 kN DG16 Sec 2.5
4 ′
With: ′= /2 − = 60.00 mm

= min ; 25.4 3.682 − 0.085 = 29.92 mm

0.85 + 0.80 ′ +
2 8
= = 51.55 kN
4 ,
Moment strength
[2 − , +2 − , + +2 ]
1 [2 − , +2 ( + + ]
= max = 87.66 kN.m DG16 Sec 2.5
Ω Ω [2 − , + + 2 ( + )]
2 ( + + +
With: W= 2
= = 235.62 kN
4
Tb = 179 kN

Demand flexural moment Map = 45.94 kNm

Ratio demand/capacity D/C = 0.52 OK

d. Bolts shear 1
= = 141.37 kN AISC J3-1
Ω Ω 4
With: W= 2
n= 2
Demand shear strength Va = 16.412 kN
Ratio demand/capacity D/C = 0.12 OK

148
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT
Designed by LHD
Description RS 4 4 20 AT FRAME K2 Checked by JCT

e. Bolts bearing under shear load

1
= 2 min( , ( )) + 2( − 1) min( r , ( )) = 293.63 kN AISC Eq. J3-6
Ω Ω 2
With: W= 2
n= 2
= 1.2 = 293.63 kN
= 1.2 = 0.00 kN
( ) = 2.4 = 301.16 kN
= − /2 = 39.00 mm
= − = 0.00 mm

Demand shear strength Va = 16.41 kN

Ratio demand/capacity D/C = 0.06 OK

f. Shear yielding 1
= 0.6 = 284.38 kN DG4 Eq. 3.12
Ω Ω
With: W= 1.67
Demand shear strength Va = 62.11 kN
Ratio demand/capacity D/C = 0.22 OK

g. Shear rupture 1
= 0.6 [ − 2( + 1.6)] t = 219.85 kN DG4 Eq. 3.13
Ω Ω
With: W= 2
Demand shear strength Va = 62.11 kN
Ratio demand/capacity D/C = 0.28 OK

3. Weld check
a. Web weld shear strength
- Fillet Welding 1
= 0.6 = 196.72 kN AISC Eq. J2-4
Ω Ω
With: W= 2
2
= (2 − ) = 1357.65 mm² Sec. J2.4
2
- Groove Welding
1
= 0.6 = 0.00 kN
Ω Ω
Weld size W g= 0 mm
= 2W = 0.00 mm²
W= 2.00
Demand shear strength Va = 16.41 kN
Ratio demand/capacity D/C = 0.08 OK

b. Web weld strength to reach yield stress

1 2
=2 0.6 = 15.37 kN/cm AISC Eq. J2-4
Ω Ω 2
With: W= 2
c= 1.5
1
= = 10.32 kN/cm AISC Eq. J4-1
Demand yield stress Ω Ω
Ratio demand/capacity D/C = 0.67 OK

149
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT
Designed by LHD
Description RS 4 4 20 AT FRAME K2 Checked by JCT

c. Shear yielding 1
= 0.6 = 264.76 kN AISC Eq. J4-3
Ω Ω
With: W= 1.5
Demand shear strength Va = 16.41 kN
Ratio demand/capacity D/C = 0.06 OK

d. Flange weld capacity (external flange)

- Fillet Welding
1
= 0.6 = 302.46 kN AISC Eq. J2-4
Ω Ω
With: W= 2
2
= (2 − ) = 1391.59 mm² Sec. J2.4
2
c= 1.5
- Groove Welding
1
= 0.6 = 0.00 kN
Ω Ω
Weld size W g= 0 mm
= 2W = 0.00 mm²
W= 1.88
Demand shear strength Va = 185.44 kN
Ratio demand/capacity D/C = 0.61 OK

e. Flange weld capacity (internal flange)

- Fillet Welding
1
= 0.6 = 302.46 kN AISC Eq. J2-4
Ω Ω
With: W= 2
2
= (2 − ) = 1391.59 mm² Sec. J2.4
2
c= 1.5
- Groove Welding
1
= 0.6 = 0.00 kN
Ω Ω
Weld size W g= 0 mm
= 2W = 0.00 mm²
W= 1.88
Demand shear strength Va = 124.21 kN
Ratio demand/capacity D/C = 0.41 OK

Global critical strength ratio 0.67

150
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT Designed by LHD
Description DESIGN FOR WELDING COLUMN C2 Checked by JCT

I. MATERIAL
The weld E7XT
Strength of the weld FEXX = 48.3 kN/cm²
Height of the fillet weld w= 5 mm
Type of the weld n= 2 side

II. INTERNAL FORCE FOR CALCULATING

Shear V= 231.63 kN

III. DIMENSION
Height h= 600 mm
Width b= 184 mm
Web thickness tw = 6 mm
Flange thickness tf = 8 mm
Length L= 7.1 mm
Moment of inertia Ix = 3.58E+08 mm4

IV. CHECKING THE WELD

First moment about neutral axis of 1 flange area
(ℎ − )
= = 435712 mm3
2
Shear flow at the weld on 1mm
.
= . = = 0.28 kN/mm

Strength of the weld on 1mm

2
= . . = 1.02 kN/mm
2 Ω
= 0.6 = 0.29 kN/mm2
Ω= 2.00
Conslusion : s / sw = 0.28 ≤ 1 OK

151
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT Designed by LHD
Description DESIGN FOR WELDING BEAM R3 Checked by JCT

I. MATERIAL
The weld E7XT
Strength of the weld FEXX = 48.3 kN/cm²
Height of the fillet weld w= 5 mm
Type of the weld n= 1 side

II. INTERNAL FORCE FOR CALCULATING

Shear V= 231.78 kN

III. DIMENSION
Height h= 600 mm
Width b= 184 mm
Web thickness tw = 6 mm
Flange thickness tf = 8 mm
Length L= 7500 mm
Moment of inertia Ix = 3.58E+08 mm4

IV. CHECKING THE WELD

First moment about neutral axis of 1 flange area
(ℎ − )
= = 435712 mm3
2
Shear flow at the weld on 1mm
.
= . = = 0.28 kN/mm

Strength of the weld on 1mm

2
= . . = 0.51 kN/mm
2 Ω
= 0.6 = 0.29 kN/mm2
Ω= 2.00
Conslusion : s / sw = 0.55 ≤ 1 OK

152
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT LHD
Designed
Description FLANGE BRACING FROM GL.1 TO GL.4 Checked JCT

I. INPUT DATA
1. Section & Section Properties

b a t Ag rmin rx ry
Hot-rolled member 2
(mm) (mm) (mm) (cm ) (cm) (cm) (cm)
V 60x60x2.5 60 60 2.5 2.94 1.20 1.90 1.90
Length of Angle V L= 543 mm
θ= 45 o
2. Material
Structural steel ASTM JIS 3302 (G450,Z275)
Specified minimum yield stress Fy = 45 kN/cm²
Modulus of elasticity of steel E = 20000 kN/cm²
3. Internal Force
Bending moment Mr = 37 kN.m
Height of the rafter h = 0.384 m
Unbracing length of rafter Lb = 2.00 m

II. DESIGN OF MEMBER STRENGTH

1. Checking Ratio of Slenderness

 L L
72  0.75 r when
rmin
 80
105.89
KL  min
  106 ≤ 200 OK AISC E2
r  L L
32  1.25 when  80 88.48
 rmin rmin

2. Single Angle Strength

The nominal compressive strength
P n = F cr A g = 34.90 kN AISC E3-1
Where
QFy
   KL E
Q 0.658 Fe  Fy when  4.71
   r QFy 11.88
Fcr      11.88 kN AISC E7
 KL E 15.44
Fcr  0.877Fe when  4.71
 r QFy
 2E
Fe  2
 17.61 kN/cm²
 KL 
 r 
 

153
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT LHD
Designed
Description FLANGE BRACING FROM GL.1 TO GL.4 Checked JCT


 b E
 1 when  0.45
 t Fy

  b  Fy E b E 1
Q  Qs  1.34  0.76   when 0.45   0.91  0.41 AISC E7-1c
 t  E Fy t Fy

 0.53E b E 0.47
when  0.91
 2
t Fy
 b
Fy  
 t  0.41
The nominal tensile strength Pn =FyAg = 132.19 kN

3. Checking Capacity of Flange Bracing

Strength required
0.02
= = 1.95 kN A-6-7
ℎ
Cd = 1.00
Stiffness required
10
= Ω = 9.7 kN/cm A-6-8
ℎ
Ω= 2.00
- One side flange bracing when h < 0.8m
The allowable compressive strength

= = 20.90 kN
Ω
Ωc = 1.67 AISC E1
- Both side flange bracing when h ≥ 0.8m
The allowable tensile strength = = 79.15 kN
Ω
a. Checking strength Ωc = 1.67 AISC D2

Demand strength Pa = 1.95 kN

Demand/Capacity ratio D/C = 0.09 OK

b. Checking stiffness of flange bracing = = 540.9 kN/cm

Demand Stiffness βbr = 9.7 kN/cm

Demand/Capacity ratio D/C = 0.02 OK

4. Bolt checking
The shear strength of bolt 1
Bolt M12 Grade 4.6 = = 10.18 kN AISC Eq. J3-1
Ω Ω 4
Fnv = 0.45 Fu = 18 kN/cm²
Ω= 2.0
Demand shear strength Va = 1.95 kN
Demand/Capacity ratio D/C = 0.19 OK

154
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT LHD
Designed
Description FLANGE BRACING FROM GL.5 TO GL.9 Checked JCT

I. INPUT DATA
1. Section & Section Properties

b a t Ag rmin rx ry
Hot-rolled member 2
(mm) (mm) (mm) (cm ) (cm) (cm) (cm)
V 60x60x2.5 60 60 2.5 2.94 1.20 1.90 1.90
Length of Angle V L= 849 mm
θ= 45 o
2. Material
Structural steel ASTM JIS 3302 (G450,Z275)
Specified minimum yield stress Fy = 45 kN/cm²
Modulus of elasticity of steel E = 20000 kN/cm²
3. Internal Force
Bending moment Mr = 232 kN.m
Height of the rafter h= 0.60 m
Unbracing length of rafter Lb = 2.00 m

II. DESIGN OF MEMBER STRENGTH

1. Checking Ratio of Slenderness

 L L
72  0.75 r when
rmin
 80
124.95
KL  min
  125 ≤ 200 OK AISC E2
r  L L
32  1.25 when  80 120.25
 rmin rmin

2. Single Angle Strength

The nominal compressive strength
P n = F cr A g = 29.40 kN AISC E3-1
Where
QFy
   KL E
Q 0.658 Fe  Fy when  4.71
   r QFy 10.01
Fcr      10.01 kN AISC E7
 KL E 11.09
Fcr  0.877Fe when  4.71
 r QFy
 2E
Fe  2
 12.64 kN/cm²
 KL 
 r 
 

155
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Date 11/2021
Project CATAINGAN PROJECT LHD
Designed
Description FLANGE BRACING FROM GL.5 TO GL.9 Checked JCT


 b E
 1 when  0.45
 t Fy

  b  Fy E b E 1
Q  Qs  1.34  0.76   when 0.45   0.91  0.41 AISC E7-1c
 t  E Fy t Fy

 0.53E b E 0.47
when  0.91
 2
t Fy
 b
Fy  
 t  0.41
The nominal tensile strength Pn =FyAg = 132.19 kN

3. Checking Capacity of Flange Bracing

Strength required
0.02
= = 7.73 kN A-6-7
ℎ
Cd = 1.00
Stiffness required
10
= Ω = 38.6 kN/cm A-6-8
ℎ
Ω= 2.00
- One side flange bracing when h < 0.8m
The allowable compressive strength

= = 17.60 kN
Ω
Ωc = 1.67 AISC E1
- Both side flange bracing when h ≥ 0.8m
The allowable tensile strength = = 79.15 kN
Ω
a. Checking strength Ωc = 1.67 AISC D2

Demand strength Pa = 7.73 kN

Demand/Capacity ratio D/C = 0.44 OK

b. Checking stiffness of flange bracing = = 346.2 kN/cm

Demand Stiffness βbr = 38.6 kN/cm

Demand/Capacity ratio D/C = 0.11 OK

4. Bolt checking
The shear strength of bolt 1
Bolt M12 Grade 4.6 = = 10.18 kN AISC Eq. J3-1
Ω Ω 4
Fnv = 0.45 Fu = 18 kN/cm²
Ω= 2.0
Demand shear strength Va = 7.73 kN
Demand/Capacity ratio D/C = 0.76 OK

156
 Job No. PHL.T3.25.21 Item POWERHOUSE Rev. No. 00
Project CATAINGAN PROJECT Date 11/2021

SECTION 3 Designed By LHD

Description
COMPUTER DESIGN PRINTOUTS Checked By JCT

SECTION 3
COMPUTER DESIGN PRINTOUTS

157
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
1. Element Forces Frame K2
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
127 0.00 COMBO 1 Combination -9.951 10.451 -0.017 -0.020 0.000 0.000
127 0.25 COMBO 1 Combination -9.880 10.451 -0.017 -0.020 0.004 -2.613
127 0.50 COMBO 1 Combination -9.809 10.451 -0.017 -0.020 0.008 -5.225
127 0.00 COMBO 2 Combination -36.848 37.678 -0.061 -0.073 0.000 0.000
127 0.25 COMBO 2 Combination -36.777 37.678 -0.061 -0.073 0.015 -9.420
127 0.50 COMBO 2 Combination -36.706 37.678 -0.061 -0.073 0.030 -18.839
127 0.00 COMBO 3 Combination 41.056 -49.592 0.069 0.081 0.000 0.000
127 0.25 COMBO 3 Combination 41.127 -50.819 0.069 0.081 -0.017 12.551
127 0.50 COMBO 3 Combination 41.198 -52.046 0.069 0.081 -0.035 25.409
127 0.00 COMBO 4 Combination 16.073 -16.984 0.026 0.030 0.000 0.000
127 0.25 COMBO 4 Combination 16.144 -17.379 0.026 0.030 -0.007 4.295
127 0.50 COMBO 4 Combination 16.215 -17.773 0.026 0.030 -0.013 8.689
127 0.00 COMBO 5 Combination 61.568 -48.335 0.081 0.099 0.000 0.000
127 0.25 COMBO 5 Combination 61.639 -47.696 0.081 0.099 -0.020 12.004
127 0.50 COMBO 5 Combination 61.710 -47.057 0.081 0.099 -0.041 23.848
127 0.00 COMBO 6 Combination 36.606 -15.719 0.039 0.048 0.000 0.000
127 0.25 COMBO 6 Combination 36.677 -14.247 0.039 0.048 -0.010 3.746
127 0.50 COMBO 6 Combination 36.748 -12.776 0.039 0.048 -0.019 7.124
127 0.00 COMBO 7 Combination 50.662 -51.707 0.075 0.088 0.000 0.000
127 0.25 COMBO 7 Combination 50.733 -53.165 0.075 0.088 -0.019 13.109
127 0.50 COMBO 7 Combination 50.804 -54.623 0.075 0.088 -0.037 26.583
127 0.00 COMBO 8 Combination 60.243 -46.134 0.052 0.062 0.000 0.000
127 0.25 COMBO 8 Combination 60.314 -47.592 0.052 0.062 -0.013 11.716
127 0.50 COMBO 8 Combination 60.385 -49.050 0.052 0.062 -0.026 23.796
127 0.00 COMBO 9 Combination -14.434 14.989 -0.024 -0.029 0.000 0.000
127 0.25 COMBO 9 Combination -14.363 14.989 -0.024 -0.029 0.006 -3.747
127 0.50 COMBO 9 Combination -14.292 14.989 -0.024 -0.029 0.012 -7.494
127 0.00 COMBO 10 Combination -41.331 42.216 -0.068 -0.082 0.000 0.000
127 0.25 COMBO 10 Combination -41.260 42.216 -0.068 -0.082 0.017 -10.554
127 0.50 COMBO 10 Combination -41.189 42.216 -0.068 -0.082 0.034 -21.108
127 0.00 COMBO 11 Combination -14.434 14.989 -0.024 -0.029 0.000 0.000
127 0.25 COMBO 11 Combination -14.363 14.989 -0.024 -0.029 0.006 -3.747
127 0.50 COMBO 11 Combination -14.292 14.989 -0.024 -0.029 0.012 -7.494
127 0.00 COMBO 12 Combination -14.434 14.989 -0.024 -0.029 0.000 0.000
127 0.25 COMBO 12 Combination -14.363 14.989 -0.024 -0.029 0.006 -3.747
127 0.50 COMBO 12 Combination -14.292 14.989 -0.024 -0.029 0.012 -7.494
127 0.00 COMBO 13 Combination -14.434 14.989 -0.024 -0.029 0.000 0.000
127 0.25 COMBO 13 Combination -14.363 14.989 -0.024 -0.029 0.006 -3.747
127 0.50 COMBO 13 Combination -14.292 14.989 -0.024 -0.029 0.012 -7.494
127 0.00 COMBO 14 Combination -34.606 35.409 -0.057 -0.068 0.000 0.000
127 0.25 COMBO 14 Combination -34.535 35.409 -0.057 -0.068 0.014 -8.852
127 0.50 COMBO 14 Combination -34.465 35.409 -0.057 -0.068 0.029 -17.705
127 0.00 COMBO 15 Combination -34.606 35.409 -0.057 -0.068 0.000 0.000
127 0.25 COMBO 15 Combination -34.535 35.409 -0.057 -0.068 0.014 -8.852
127 0.50 COMBO 15 Combination -34.465 35.409 -0.057 -0.068 0.029 -17.705
127 0.00 COMBO 16 Combination -34.606 35.409 -0.057 -0.068 0.000 0.000
127 0.25 COMBO 16 Combination -34.535 35.409 -0.057 -0.068 0.014 -8.852

158
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
1. Element Forces Frame K2
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
127 0.50 COMBO 16 Combination -34.465 35.409 -0.057 -0.068 0.029 -17.705
127 0.00 COMBO 17 Combination -14.434 14.989 -0.024 -0.029 0.000 0.000
127 0.25 COMBO 17 Combination -14.363 14.989 -0.024 -0.029 0.006 -3.747
127 0.50 COMBO 17 Combination -14.292 14.989 -0.024 -0.029 0.012 -7.494
127 0.00 COMBO 18 Combination -14.434 14.989 -0.024 -0.029 0.000 0.000
127 0.25 COMBO 18 Combination -14.363 14.989 -0.024 -0.029 0.006 -3.747
127 0.50 COMBO 18 Combination -14.292 14.989 -0.024 -0.029 0.012 -7.494
127 0.00 COMBO 19 Combination -34.606 35.409 -0.057 -0.068 0.000 0.000
127 0.25 COMBO 19 Combination -34.535 35.409 -0.057 -0.068 0.014 -8.852
127 0.50 COMBO 19 Combination -34.465 35.409 -0.057 -0.068 0.029 -17.705
127 0.00 COMBO 20 Combination -34.606 35.409 -0.057 -0.068 0.000 0.000
127 0.25 COMBO 20 Combination -34.535 35.409 -0.057 -0.068 0.014 -8.852
127 0.50 COMBO 20 Combination -34.465 35.409 -0.057 -0.068 0.029 -17.705
127 0.00 COMBO 21 Combination 36.574 -45.054 0.062 0.072 0.000 0.000
127 0.25 COMBO 21 Combination 36.645 -46.281 0.062 0.072 -0.016 11.417
127 0.50 COMBO 21 Combination 36.715 -47.508 0.062 0.072 -0.031 23.140
127 0.00 COMBO 22 Combination 11.590 -12.446 0.019 0.021 0.000 0.000
127 0.25 COMBO 22 Combination 11.661 -12.841 0.019 0.021 -0.005 3.161
127 0.50 COMBO 22 Combination 11.732 -13.235 0.019 0.021 -0.009 6.420
127 0.00 COMBO 23 Combination 57.086 -43.797 0.074 0.090 0.000 0.000
127 0.25 COMBO 23 Combination 57.157 -43.158 0.074 0.090 -0.019 10.869
127 0.50 COMBO 23 Combination 57.227 -42.519 0.074 0.090 -0.037 21.579
127 0.00 COMBO 24 Combination 32.123 -11.181 0.031 0.039 0.000 0.000
127 0.25 COMBO 24 Combination 32.194 -9.709 0.031 0.039 -0.008 2.611
127 0.50 COMBO 24 Combination 32.265 -8.238 0.031 0.039 -0.016 4.855
127 0.00 COMBO 25 Combination 46.179 -47.169 0.067 0.080 0.000 0.000
127 0.25 COMBO 25 Combination 46.250 -48.627 0.067 0.080 -0.017 11.975
127 0.50 COMBO 25 Combination 46.321 -50.086 0.067 0.080 -0.034 24.314
127 0.00 COMBO 26 Combination 55.760 -41.596 0.045 0.054 0.000 0.000
127 0.25 COMBO 26 Combination 55.831 -43.054 0.045 0.054 -0.011 10.581
127 0.50 COMBO 26 Combination 55.902 -44.512 0.045 0.054 -0.023 21.527
127 0.00 COMBO 27 Combination -13.623 13.389 -0.004 -0.002 0.000 0.000
127 0.25 COMBO 27 Combination -13.552 13.389 -0.004 -0.002 0.001 -3.347
127 0.50 COMBO 27 Combination -13.481 13.389 -0.004 -0.002 0.002 -6.695
127 0.00 COMBO 28 Combination -14.973 18.759 -0.029 -0.036 0.000 0.000
127 0.25 COMBO 28 Combination -14.903 18.759 -0.029 -0.036 0.007 -4.690
127 0.50 COMBO 28 Combination -14.832 18.759 -0.029 -0.036 0.015 -9.380
127 0.00 COMBO 29 Combination 3.649 -9.622 0.007 0.008 0.000 0.000
127 0.25 COMBO 29 Combination 3.720 -10.543 0.007 0.008 -0.002 2.521
127 0.50 COMBO 29 Combination 3.791 -11.463 0.007 0.008 -0.004 5.271
127 0.00 COMBO 30 Combination -15.088 14.833 -0.025 -0.031 0.000 0.000
127 0.25 COMBO 30 Combination -15.017 14.537 -0.025 -0.031 0.006 -3.671
127 0.50 COMBO 30 Combination -14.947 14.242 -0.025 -0.031 0.012 -7.269
127 0.00 COMBO 31 Combination 19.033 -8.680 0.017 0.021 0.000 0.000
127 0.25 COMBO 31 Combination 19.104 -8.200 0.017 0.021 -0.004 2.110
127 0.50 COMBO 31 Combination 19.175 -7.721 0.017 0.021 -0.008 4.100
127 0.00 COMBO 32 Combination 0.311 15.782 -0.016 -0.017 0.000 0.000

159
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
1. Element Forces Frame K2
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
127 0.25 COMBO 32 Combination 0.382 16.886 -0.016 -0.017 0.004 -4.084
127 0.50 COMBO 32 Combination 0.453 17.990 -0.016 -0.017 0.008 -8.443
127 0.00 COMBO 33 Combination 10.853 -11.209 0.012 0.013 0.000 0.000
127 0.25 COMBO 33 Combination 10.924 -12.303 0.012 0.013 -0.003 2.939
127 0.50 COMBO 33 Combination 10.995 -13.396 0.012 0.013 -0.006 6.151
127 0.00 COMBO 34 Combination 18.039 -7.029 -0.005 -0.006 0.000 0.000
127 0.25 COMBO 34 Combination 18.110 -8.123 -0.005 -0.006 0.001 1.894
127 0.50 COMBO 34 Combination 18.181 -9.216 -0.005 -0.006 0.003 4.061
127 0.00 COMBO 35 Combination 3.649 -9.622 0.007 0.008 0.000 0.000
127 0.25 COMBO 35 Combination 3.720 -10.543 0.007 0.008 -0.002 2.521
127 0.50 COMBO 35 Combination 3.791 -11.463 0.007 0.008 -0.004 5.271
127 0.00 COMBO 36 Combination 3.649 -9.622 0.007 0.008 0.000 0.000
127 0.25 COMBO 36 Combination 3.720 -10.543 0.007 0.008 -0.002 2.521
127 0.50 COMBO 36 Combination 3.791 -11.463 0.007 0.008 -0.004 5.271
127 0.00 COMBO 37 Combination -15.088 14.833 -0.025 -0.031 0.000 0.000
127 0.25 COMBO 37 Combination -15.017 14.537 -0.025 -0.031 0.006 -3.671
127 0.50 COMBO 37 Combination -14.947 14.242 -0.025 -0.031 0.012 -7.269
127 0.00 COMBO 38 Combination -15.088 14.833 -0.025 -0.031 0.000 0.000
127 0.25 COMBO 38 Combination -15.017 14.537 -0.025 -0.031 0.006 -3.671
127 0.50 COMBO 38 Combination -14.947 14.242 -0.025 -0.031 0.012 -7.269
127 0.00 COMBO 39 Combination 19.033 -8.680 0.017 0.021 0.000 0.000
127 0.25 COMBO 39 Combination 19.104 -8.200 0.017 0.021 -0.004 2.110
127 0.50 COMBO 39 Combination 19.175 -7.721 0.017 0.021 -0.008 4.100
127 0.00 COMBO 40 Combination 19.033 -8.680 0.017 0.021 0.000 0.000
127 0.25 COMBO 40 Combination 19.104 -8.200 0.017 0.021 -0.004 2.110
127 0.50 COMBO 40 Combination 19.175 -7.721 0.017 0.021 -0.008 4.100
127 0.00 COMBO 41 Combination 0.311 15.782 -0.016 -0.017 0.000 0.000
127 0.25 COMBO 41 Combination 0.382 16.886 -0.016 -0.017 0.004 -4.084
127 0.50 COMBO 41 Combination 0.453 17.990 -0.016 -0.017 0.008 -8.443
127 0.00 COMBO 42 Combination 0.311 15.782 -0.016 -0.017 0.000 0.000
127 0.25 COMBO 42 Combination 0.382 16.886 -0.016 -0.017 0.004 -4.084
127 0.50 COMBO 42 Combination 0.453 17.990 -0.016 -0.017 0.008 -8.443
127 0.00 COMBO 43 Combination 10.853 -11.209 0.012 0.013 0.000 0.000
127 0.25 COMBO 43 Combination 10.924 -12.303 0.012 0.013 -0.003 2.939
127 0.50 COMBO 43 Combination 10.995 -13.396 0.012 0.013 -0.006 6.151
127 0.00 COMBO 44 Combination 10.853 -11.209 0.012 0.013 0.000 0.000
127 0.25 COMBO 44 Combination 10.924 -12.303 0.012 0.013 -0.003 2.939
127 0.50 COMBO 44 Combination 10.995 -13.396 0.012 0.013 -0.006 6.151
127 0.00 COMBO 45 Combination 18.039 -7.029 -0.005 -0.006 0.000 0.000
127 0.25 COMBO 45 Combination 18.110 -8.123 -0.005 -0.006 0.001 1.894
127 0.50 COMBO 45 Combination 18.181 -9.216 -0.005 -0.006 0.003 4.061
127 0.00 COMBO 46 Combination 18.039 -7.029 -0.005 -0.006 0.000 0.000
127 0.25 COMBO 46 Combination 18.110 -8.123 -0.005 -0.006 0.001 1.894
127 0.50 COMBO 46 Combination 18.181 -9.216 -0.005 -0.006 0.003 4.061
127 0.00 COMBO 47 Combination 3.649 -9.622 0.007 0.008 0.000 0.000
127 0.25 COMBO 47 Combination 3.720 -10.543 0.007 0.008 -0.002 2.521
127 0.50 COMBO 47 Combination 3.791 -11.463 0.007 0.008 -0.004 5.271

160
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
1. Element Forces Frame K2
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
127 0.00 COMBO 48 Combination 3.649 -9.622 0.007 0.008 0.000 0.000
127 0.25 COMBO 48 Combination 3.720 -10.543 0.007 0.008 -0.002 2.521
127 0.50 COMBO 48 Combination 3.791 -11.463 0.007 0.008 -0.004 5.271
127 0.00 COMBO 49 Combination -15.088 14.833 -0.025 -0.031 0.000 0.000
127 0.25 COMBO 49 Combination -15.017 14.537 -0.025 -0.031 0.006 -3.671
127 0.50 COMBO 49 Combination -14.947 14.242 -0.025 -0.031 0.012 -7.269
127 0.00 COMBO 50 Combination -15.088 14.833 -0.025 -0.031 0.000 0.000
127 0.25 COMBO 50 Combination -15.017 14.537 -0.025 -0.031 0.006 -3.671
127 0.50 COMBO 50 Combination -14.947 14.242 -0.025 -0.031 0.012 -7.269
127 0.00 COMBO 51 Combination 19.033 -8.680 0.017 0.021 0.000 0.000
127 0.25 COMBO 51 Combination 19.104 -8.200 0.017 0.021 -0.004 2.110
127 0.50 COMBO 51 Combination 19.175 -7.721 0.017 0.021 -0.008 4.100
127 0.00 COMBO 52 Combination 19.033 -8.680 0.017 0.021 0.000 0.000
127 0.25 COMBO 52 Combination 19.104 -8.200 0.017 0.021 -0.004 2.110
127 0.50 COMBO 52 Combination 19.175 -7.721 0.017 0.021 -0.008 4.100
127 0.00 COMBO 53 Combination 0.311 15.782 -0.016 -0.017 0.000 0.000
127 0.25 COMBO 53 Combination 0.382 16.886 -0.016 -0.017 0.004 -4.084
127 0.50 COMBO 53 Combination 0.453 17.990 -0.016 -0.017 0.008 -8.443
127 0.00 COMBO 54 Combination 0.311 15.782 -0.016 -0.017 0.000 0.000
127 0.25 COMBO 54 Combination 0.382 16.886 -0.016 -0.017 0.004 -4.084
127 0.50 COMBO 54 Combination 0.453 17.990 -0.016 -0.017 0.008 -8.443
127 0.00 COMBO 55 Combination 10.853 -11.209 0.012 0.013 0.000 0.000
127 0.25 COMBO 55 Combination 10.924 -12.303 0.012 0.013 -0.003 2.939
127 0.50 COMBO 55 Combination 10.995 -13.396 0.012 0.013 -0.006 6.151
127 0.00 COMBO 56 Combination 10.853 -11.209 0.012 0.013 0.000 0.000
127 0.25 COMBO 56 Combination 10.924 -12.303 0.012 0.013 -0.003 2.939
127 0.50 COMBO 56 Combination 10.995 -13.396 0.012 0.013 -0.006 6.151
127 0.00 COMBO 57 Combination 18.039 -7.029 -0.005 -0.006 0.000 0.000
127 0.25 COMBO 57 Combination 18.110 -8.123 -0.005 -0.006 0.001 1.894
127 0.50 COMBO 57 Combination 18.181 -9.216 -0.005 -0.006 0.003 4.061
127 0.00 COMBO 58 Combination 18.039 -7.029 -0.005 -0.006 0.000 0.000
127 0.25 COMBO 58 Combination 18.110 -8.123 -0.005 -0.006 0.001 1.894
127 0.50 COMBO 58 Combination 18.181 -9.216 -0.005 -0.006 0.003 4.061
127 0.00 COMBO 59 Combination 23.822 -30.043 0.040 0.047 0.000 0.000
127 0.25 COMBO 59 Combination 23.893 -30.963 0.040 0.047 -0.010 7.626
127 0.50 COMBO 59 Combination 23.964 -31.884 0.040 0.047 -0.020 15.482
127 0.00 COMBO 60 Combination 5.084 -5.587 0.008 0.009 0.000 0.000
127 0.25 COMBO 60 Combination 5.155 -5.883 0.008 0.009 -0.002 1.434
127 0.50 COMBO 60 Combination 5.226 -6.179 0.008 0.009 -0.004 2.942
127 0.00 COMBO 61 Combination 39.206 -29.100 0.049 0.060 0.000 0.000
127 0.25 COMBO 61 Combination 39.277 -28.621 0.049 0.060 -0.012 7.215
127 0.50 COMBO 61 Combination 39.348 -28.142 0.049 0.060 -0.025 14.311
127 0.00 COMBO 62 Combination 20.484 -4.638 0.017 0.022 0.000 0.000
127 0.25 COMBO 62 Combination 20.555 -3.535 0.017 0.022 -0.004 1.022
127 0.50 COMBO 62 Combination 20.626 -2.431 0.017 0.022 -0.009 1.767
127 0.00 COMBO 63 Combination 31.026 -31.630 0.044 0.052 0.000 0.000
127 0.25 COMBO 63 Combination 31.097 -32.723 0.044 0.052 -0.011 8.044

161
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
1. Element Forces Frame K2
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
127 0.50 COMBO 63 Combination 31.168 -33.817 0.044 0.052 -0.022 16.362
127 0.00 COMBO 64 Combination 38.212 -27.450 0.028 0.033 0.000 0.000
127 0.25 COMBO 64 Combination 38.283 -28.543 0.028 0.033 -0.007 6.999
127 0.50 COMBO 64 Combination 38.353 -29.637 0.028 0.033 -0.014 14.272
127 0.00 COMBO 65 Combination 3.649 -9.622 0.007 0.008 0.000 0.000
127 0.25 COMBO 65 Combination 3.720 -10.543 0.007 0.008 -0.002 2.521
127 0.50 COMBO 65 Combination 3.791 -11.463 0.007 0.008 -0.004 5.271
127 0.00 COMBO 66 Combination -15.088 14.833 -0.025 -0.031 0.000 0.000
127 0.25 COMBO 66 Combination -15.017 14.537 -0.025 -0.031 0.006 -3.671
127 0.50 COMBO 66 Combination -14.947 14.242 -0.025 -0.031 0.012 -7.269
127 0.00 COMBO 67 Combination 19.033 -8.680 0.017 0.021 0.000 0.000
127 0.25 COMBO 67 Combination 19.104 -8.200 0.017 0.021 -0.004 2.110
127 0.50 COMBO 67 Combination 19.175 -7.721 0.017 0.021 -0.008 4.100
127 0.00 COMBO 68 Combination 0.311 15.782 -0.016 -0.017 0.000 0.000
127 0.25 COMBO 68 Combination 0.382 16.886 -0.016 -0.017 0.004 -4.084
127 0.50 COMBO 68 Combination 0.453 17.990 -0.016 -0.017 0.008 -8.443
127 0.00 COMBO 69 Combination 10.853 -11.209 0.012 0.013 0.000 0.000
127 0.25 COMBO 69 Combination 10.924 -12.303 0.012 0.013 -0.003 2.939
127 0.50 COMBO 69 Combination 10.995 -13.396 0.012 0.013 -0.006 6.151
127 0.00 COMBO 70 Combination 18.039 -7.029 -0.005 -0.006 0.000 0.000
127 0.25 COMBO 70 Combination 18.110 -8.123 -0.005 -0.006 0.001 1.894
127 0.50 COMBO 70 Combination 18.181 -9.216 -0.005 -0.006 0.003 4.061
127 0.00 COMBO 71 Combination 23.822 -30.043 0.040 0.047 0.000 0.000
127 0.25 COMBO 71 Combination 23.893 -30.963 0.040 0.047 -0.010 7.626
127 0.50 COMBO 71 Combination 23.964 -31.884 0.040 0.047 -0.020 15.482
127 0.00 COMBO 72 Combination 23.822 -30.043 0.040 0.047 0.000 0.000
127 0.25 COMBO 72 Combination 23.893 -30.963 0.040 0.047 -0.010 7.626
127 0.50 COMBO 72 Combination 23.964 -31.884 0.040 0.047 -0.020 15.482
127 0.00 COMBO 73 Combination 5.084 -5.587 0.008 0.009 0.000 0.000
127 0.25 COMBO 73 Combination 5.155 -5.883 0.008 0.009 -0.002 1.434
127 0.50 COMBO 73 Combination 5.226 -6.179 0.008 0.009 -0.004 2.942
127 0.00 COMBO 74 Combination 5.084 -5.587 0.008 0.009 0.000 0.000
127 0.25 COMBO 74 Combination 5.155 -5.883 0.008 0.009 -0.002 1.434
127 0.50 COMBO 74 Combination 5.226 -6.179 0.008 0.009 -0.004 2.942
127 0.00 COMBO 75 Combination 39.206 -29.100 0.049 0.060 0.000 0.000
127 0.25 COMBO 75 Combination 39.277 -28.621 0.049 0.060 -0.012 7.215
127 0.50 COMBO 75 Combination 39.348 -28.142 0.049 0.060 -0.025 14.311
127 0.00 COMBO 76 Combination 39.206 -29.100 0.049 0.060 0.000 0.000
127 0.25 COMBO 76 Combination 39.277 -28.621 0.049 0.060 -0.012 7.215
127 0.50 COMBO 76 Combination 39.348 -28.142 0.049 0.060 -0.025 14.311
127 0.00 COMBO 77 Combination 20.484 -4.638 0.017 0.022 0.000 0.000
127 0.25 COMBO 77 Combination 20.555 -3.535 0.017 0.022 -0.004 1.022
127 0.50 COMBO 77 Combination 20.626 -2.431 0.017 0.022 -0.009 1.767
127 0.00 COMBO 78 Combination 20.484 -4.638 0.017 0.022 0.000 0.000
127 0.25 COMBO 78 Combination 20.555 -3.535 0.017 0.022 -0.004 1.022
127 0.50 COMBO 78 Combination 20.626 -2.431 0.017 0.022 -0.009 1.767
127 0.00 COMBO 79 Combination 31.026 -31.630 0.044 0.052 0.000 0.000

162
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
1. Element Forces Frame K2
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
127 0.25 COMBO 79 Combination 31.097 -32.723 0.044 0.052 -0.011 8.044
127 0.50 COMBO 79 Combination 31.168 -33.817 0.044 0.052 -0.022 16.362
127 0.00 COMBO 80 Combination 31.026 -31.630 0.044 0.052 0.000 0.000
127 0.25 COMBO 80 Combination 31.097 -32.723 0.044 0.052 -0.011 8.044
127 0.50 COMBO 80 Combination 31.168 -33.817 0.044 0.052 -0.022 16.362
127 0.00 COMBO 81 Combination 38.212 -27.450 0.028 0.033 0.000 0.000
127 0.25 COMBO 81 Combination 38.283 -28.543 0.028 0.033 -0.007 6.999
127 0.50 COMBO 81 Combination 38.353 -29.637 0.028 0.033 -0.014 14.272
127 0.00 COMBO 82 Combination 38.212 -27.450 0.028 0.033 0.000 0.000
127 0.25 COMBO 82 Combination 38.283 -28.543 0.028 0.033 -0.007 6.999
127 0.50 COMBO 82 Combination 38.353 -29.637 0.028 0.033 -0.014 14.272
127 0.00 COMBO 83 Combination 23.822 -30.043 0.040 0.047 0.000 0.000
127 0.25 COMBO 83 Combination 23.893 -30.963 0.040 0.047 -0.010 7.626
127 0.50 COMBO 83 Combination 23.964 -31.884 0.040 0.047 -0.020 15.482
127 0.00 COMBO 84 Combination 23.822 -30.043 0.040 0.047 0.000 0.000
127 0.25 COMBO 84 Combination 23.893 -30.963 0.040 0.047 -0.010 7.626
127 0.50 COMBO 84 Combination 23.964 -31.884 0.040 0.047 -0.020 15.482
127 0.00 COMBO 85 Combination 5.084 -5.587 0.008 0.009 0.000 0.000
127 0.25 COMBO 85 Combination 5.155 -5.883 0.008 0.009 -0.002 1.434
127 0.50 COMBO 85 Combination 5.226 -6.179 0.008 0.009 -0.004 2.942
127 0.00 COMBO 86 Combination 5.084 -5.587 0.008 0.009 0.000 0.000
127 0.25 COMBO 86 Combination 5.155 -5.883 0.008 0.009 -0.002 1.434
127 0.50 COMBO 86 Combination 5.226 -6.179 0.008 0.009 -0.004 2.942
127 0.00 COMBO 87 Combination 39.206 -29.100 0.049 0.060 0.000 0.000
127 0.25 COMBO 87 Combination 39.277 -28.621 0.049 0.060 -0.012 7.215
127 0.50 COMBO 87 Combination 39.348 -28.142 0.049 0.060 -0.025 14.311
127 0.00 COMBO 88 Combination 39.206 -29.100 0.049 0.060 0.000 0.000
127 0.25 COMBO 88 Combination 39.277 -28.621 0.049 0.060 -0.012 7.215
127 0.50 COMBO 88 Combination 39.348 -28.142 0.049 0.060 -0.025 14.311
127 0.00 COMBO 89 Combination 20.484 -4.638 0.017 0.022 0.000 0.000
127 0.25 COMBO 89 Combination 20.555 -3.535 0.017 0.022 -0.004 1.022
127 0.50 COMBO 89 Combination 20.626 -2.431 0.017 0.022 -0.009 1.767
127 0.00 COMBO 90 Combination 20.484 -4.638 0.017 0.022 0.000 0.000
127 0.25 COMBO 90 Combination 20.555 -3.535 0.017 0.022 -0.004 1.022
127 0.50 COMBO 90 Combination 20.626 -2.431 0.017 0.022 -0.009 1.767
127 0.00 COMBO 91 Combination 31.026 -31.630 0.044 0.052 0.000 0.000
127 0.25 COMBO 91 Combination 31.097 -32.723 0.044 0.052 -0.011 8.044
127 0.50 COMBO 91 Combination 31.168 -33.817 0.044 0.052 -0.022 16.362
127 0.00 COMBO 92 Combination 31.026 -31.630 0.044 0.052 0.000 0.000
127 0.25 COMBO 92 Combination 31.097 -32.723 0.044 0.052 -0.011 8.044
127 0.50 COMBO 92 Combination 31.168 -33.817 0.044 0.052 -0.022 16.362
127 0.00 COMBO 93 Combination 38.212 -27.450 0.028 0.033 0.000 0.000
127 0.25 COMBO 93 Combination 38.283 -28.543 0.028 0.033 -0.007 6.999
127 0.50 COMBO 93 Combination 38.353 -29.637 0.028 0.033 -0.014 14.272
127 0.00 COMBO 94 Combination 38.212 -27.450 0.028 0.033 0.000 0.000
127 0.25 COMBO 94 Combination 38.283 -28.543 0.028 0.033 -0.007 6.999
127 0.50 COMBO 94 Combination 38.353 -29.637 0.028 0.033 -0.014 14.272

163
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
1. Element Forces Frame K2
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
127 0.00 COMBO 95 Combination -13.826 13.789 -0.009 -0.009 0.000 0.000
127 0.25 COMBO 95 Combination -13.755 13.789 -0.009 -0.009 0.002 -3.447
127 0.50 COMBO 95 Combination -13.684 13.789 -0.009 -0.009 0.004 -6.895
127 0.00 COMBO 96 Combination -13.826 13.789 -0.009 -0.009 0.000 0.000
127 0.25 COMBO 96 Combination -13.755 13.789 -0.009 -0.009 0.002 -3.447
127 0.50 COMBO 96 Combination -13.684 13.789 -0.009 -0.009 0.004 -6.895
127 0.00 COMBO 97 Combination -14.838 17.817 -0.028 -0.034 0.000 0.000
127 0.25 COMBO 97 Combination -14.768 17.817 -0.028 -0.034 0.007 -4.454
127 0.50 COMBO 97 Combination -14.697 17.817 -0.028 -0.034 0.014 -8.908
127 0.00 COMBO 98 Combination -14.838 17.817 -0.028 -0.034 0.000 0.000
127 0.25 COMBO 98 Combination -14.768 17.817 -0.028 -0.034 0.007 -4.454
127 0.50 COMBO 98 Combination -14.697 17.817 -0.028 -0.034 0.014 -8.908
127 0.00 COMBO 99 Combination -13.826 13.789 -0.009 -0.009 0.000 0.000
127 0.25 COMBO 99 Combination -13.755 13.789 -0.009 -0.009 0.002 -3.447
127 0.50 COMBO 99 Combination -13.684 13.789 -0.009 -0.009 0.004 -6.895
127 0.00 COMBO 100 Combination -14.838 17.817 -0.028 -0.034 0.000 0.000
127 0.25 COMBO 100 Combination -14.768 17.817 -0.028 -0.034 0.007 -4.454
127 0.50 COMBO 100 Combination -14.697 17.817 -0.028 -0.034 0.014 -8.908
127 0.00 COMBO 101 Combination -13.826 13.789 -0.009 -0.009 0.000 0.000
127 0.25 COMBO 101 Combination -13.755 13.789 -0.009 -0.009 0.002 -3.447
127 0.50 COMBO 101 Combination -13.684 13.789 -0.009 -0.009 0.004 -6.895
127 0.00 COMBO 102 Combination -13.826 13.789 -0.009 -0.009 0.000 0.000
127 0.25 COMBO 102 Combination -13.755 13.789 -0.009 -0.009 0.002 -3.447
127 0.50 COMBO 102 Combination -13.684 13.789 -0.009 -0.009 0.004 -6.895
127 0.00 COMBO 103 Combination -14.838 17.817 -0.028 -0.034 0.000 0.000
127 0.25 COMBO 103 Combination -14.768 17.817 -0.028 -0.034 0.007 -4.454
127 0.50 COMBO 103 Combination -14.697 17.817 -0.028 -0.034 0.014 -8.908
127 0.00 COMBO 104 Combination -14.838 17.817 -0.028 -0.034 0.000 0.000
127 0.25 COMBO 104 Combination -14.768 17.817 -0.028 -0.034 0.007 -4.454
127 0.50 COMBO 104 Combination -14.697 17.817 -0.028 -0.034 0.014 -8.908
127 0.00 COMBO 105 Combination 42.347 -51.049 0.072 0.084 0.000 0.000
127 0.25 COMBO 105 Combination 42.390 -52.276 0.072 0.084 -0.018 12.916
127 0.50 COMBO 105 Combination 42.432 -53.503 0.072 0.084 -0.036 26.138
127 0.00 COMBO 106 Combination 17.364 -18.442 0.029 0.033 0.000 0.000
127 0.25 COMBO 106 Combination 17.406 -18.836 0.029 0.033 -0.007 4.660
127 0.50 COMBO 106 Combination 17.449 -19.231 0.029 0.033 -0.014 9.418
127 0.00 COMBO 107 Combination 62.859 -49.792 0.084 0.102 0.000 0.000
127 0.25 COMBO 107 Combination 62.902 -49.153 0.084 0.102 -0.021 12.368
127 0.50 COMBO 107 Combination 62.944 -48.514 0.084 0.102 -0.042 24.577
127 0.00 COMBO 108 Combination 37.897 -17.176 0.041 0.051 0.000 0.000
127 0.25 COMBO 108 Combination 37.939 -15.705 0.041 0.051 -0.010 4.110
127 0.50 COMBO 108 Combination 37.982 -14.233 0.041 0.051 -0.021 7.852
127 0.00 COMBO 109 Combination 51.953 -53.165 0.077 0.091 0.000 0.000
127 0.25 COMBO 109 Combination 51.995 -54.623 0.077 0.091 -0.019 13.474
127 0.50 COMBO 109 Combination 52.038 -56.081 0.077 0.091 -0.039 27.312
127 0.00 COMBO 110 Combination 61.534 -47.592 0.055 0.065 0.000 0.000
127 0.25 COMBO 110 Combination 61.576 -49.050 0.055 0.065 -0.014 12.080

164
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
1. Element Forces Frame K2
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
127 0.50 COMBO 110 Combination 61.619 -50.508 0.055 0.065 -0.027 24.525
127 0.00 COMBO 111 Combination -7.849 7.394 0.006 0.009 0.000 0.000
127 0.25 COMBO 111 Combination -7.807 7.394 0.006 0.009 -0.002 -1.848
127 0.50 COMBO 111 Combination -7.764 7.394 0.006 0.009 -0.003 -3.697
127 0.00 COMBO 112 Combination -9.200 12.764 -0.019 -0.025 0.000 0.000
127 0.25 COMBO 112 Combination -9.157 12.764 -0.019 -0.025 0.005 -3.191
127 0.50 COMBO 112 Combination -9.115 12.764 -0.019 -0.025 0.010 -6.382
139 0.00 COMBO 1 Combination -9.951 -10.451 -0.017 0.020 0.000 0.000
139 0.25 COMBO 1 Combination -9.880 -10.451 -0.017 0.020 0.004 2.613
139 0.50 COMBO 1 Combination -9.809 -10.451 -0.017 0.020 0.008 5.225
139 0.00 COMBO 2 Combination -36.848 -37.678 -0.061 0.073 0.000 0.000
139 0.25 COMBO 2 Combination -36.777 -37.678 -0.061 0.073 0.015 9.420
139 0.50 COMBO 2 Combination -36.706 -37.678 -0.061 0.073 0.030 18.839
139 0.00 COMBO 3 Combination 61.560 48.336 0.082 -0.099 0.000 0.000
139 0.25 COMBO 3 Combination 61.631 47.697 0.082 -0.099 -0.020 -12.004
139 0.50 COMBO 3 Combination 61.702 47.058 0.082 -0.099 -0.041 -23.848
139 0.00 COMBO 4 Combination 36.598 15.721 0.039 -0.048 0.000 0.000
139 0.25 COMBO 4 Combination 36.669 14.249 0.039 -0.048 -0.010 -3.746
139 0.50 COMBO 4 Combination 36.739 12.778 0.039 -0.048 -0.019 -7.125
139 0.00 COMBO 5 Combination 41.056 49.590 0.070 -0.082 0.000 0.000
139 0.25 COMBO 5 Combination 41.127 50.817 0.070 -0.082 -0.017 -12.551
139 0.50 COMBO 5 Combination 41.198 52.044 0.070 -0.082 -0.035 -25.409
139 0.00 COMBO 6 Combination 16.073 16.983 0.026 -0.030 0.000 0.000
139 0.25 COMBO 6 Combination 16.144 17.378 0.026 -0.030 -0.007 -4.295
139 0.50 COMBO 6 Combination 16.214 17.772 0.026 -0.030 -0.013 -8.689
139 0.00 COMBO 7 Combination 49.747 49.761 0.071 -0.084 0.000 0.000
139 0.25 COMBO 7 Combination 49.817 51.219 0.071 -0.084 -0.018 -12.623
139 0.50 COMBO 7 Combination 49.888 52.677 0.071 -0.084 -0.036 -25.610
139 0.00 COMBO 8 Combination 38.270 51.622 0.060 -0.073 0.000 0.000
139 0.25 COMBO 8 Combination 38.341 53.080 0.060 -0.073 -0.015 -13.088
139 0.50 COMBO 8 Combination 38.412 54.538 0.060 -0.073 -0.030 -26.540
139 0.00 COMBO 9 Combination -14.434 -14.989 -0.024 0.029 0.000 0.000
139 0.25 COMBO 9 Combination -14.363 -14.989 -0.024 0.029 0.006 3.747
139 0.50 COMBO 9 Combination -14.292 -14.989 -0.024 0.029 0.012 7.494
139 0.00 COMBO 10 Combination -41.331 -42.216 -0.068 0.082 0.000 0.000
139 0.25 COMBO 10 Combination -41.260 -42.216 -0.068 0.082 0.017 10.554
139 0.50 COMBO 10 Combination -41.189 -42.216 -0.068 0.082 0.034 21.108
139 0.00 COMBO 11 Combination -14.434 -14.989 -0.024 0.029 0.000 0.000
139 0.25 COMBO 11 Combination -14.363 -14.989 -0.024 0.029 0.006 3.747
139 0.50 COMBO 11 Combination -14.292 -14.989 -0.024 0.029 0.012 7.494
139 0.00 COMBO 12 Combination -14.434 -14.989 -0.024 0.029 0.000 0.000
139 0.25 COMBO 12 Combination -14.363 -14.989 -0.024 0.029 0.006 3.747
139 0.50 COMBO 12 Combination -14.292 -14.989 -0.024 0.029 0.012 7.494
139 0.00 COMBO 13 Combination -14.434 -14.989 -0.024 0.029 0.000 0.000
139 0.25 COMBO 13 Combination -14.363 -14.989 -0.024 0.029 0.006 3.747
139 0.50 COMBO 13 Combination -14.292 -14.989 -0.024 0.029 0.012 7.494
139 0.00 COMBO 14 Combination -34.606 -35.409 -0.057 0.068 0.000 0.000

165
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
1. Element Forces Frame K2
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
139 0.25 COMBO 14 Combination -34.535 -35.409 -0.057 0.068 0.014 8.852
139 0.50 COMBO 14 Combination -34.465 -35.409 -0.057 0.068 0.029 17.705
139 0.00 COMBO 15 Combination -34.606 -35.409 -0.057 0.068 0.000 0.000
139 0.25 COMBO 15 Combination -34.535 -35.409 -0.057 0.068 0.014 8.852
139 0.50 COMBO 15 Combination -34.465 -35.409 -0.057 0.068 0.029 17.705
139 0.00 COMBO 16 Combination -34.606 -35.409 -0.057 0.068 0.000 0.000
139 0.25 COMBO 16 Combination -34.535 -35.409 -0.057 0.068 0.014 8.852
139 0.50 COMBO 16 Combination -34.465 -35.409 -0.057 0.068 0.029 17.705
139 0.00 COMBO 17 Combination -14.434 -14.989 -0.024 0.029 0.000 0.000
139 0.25 COMBO 17 Combination -14.363 -14.989 -0.024 0.029 0.006 3.747
139 0.50 COMBO 17 Combination -14.292 -14.989 -0.024 0.029 0.012 7.494
139 0.00 COMBO 18 Combination -14.434 -14.989 -0.024 0.029 0.000 0.000
139 0.25 COMBO 18 Combination -14.363 -14.989 -0.024 0.029 0.006 3.747
139 0.50 COMBO 18 Combination -14.292 -14.989 -0.024 0.029 0.012 7.494
139 0.00 COMBO 19 Combination -34.606 -35.409 -0.057 0.068 0.000 0.000
139 0.25 COMBO 19 Combination -34.535 -35.409 -0.057 0.068 0.014 8.852
139 0.50 COMBO 19 Combination -34.465 -35.409 -0.057 0.068 0.029 17.705
139 0.00 COMBO 20 Combination -34.606 -35.409 -0.057 0.068 0.000 0.000
139 0.25 COMBO 20 Combination -34.535 -35.409 -0.057 0.068 0.014 8.852
139 0.50 COMBO 20 Combination -34.465 -35.409 -0.057 0.068 0.029 17.705
139 0.00 COMBO 21 Combination 57.077 43.798 0.074 -0.091 0.000 0.000
139 0.25 COMBO 21 Combination 57.148 43.159 0.074 -0.091 -0.019 -10.870
139 0.50 COMBO 21 Combination 57.219 42.520 0.074 -0.091 -0.037 -21.579
139 0.00 COMBO 22 Combination 32.115 11.183 0.031 -0.039 0.000 0.000
139 0.25 COMBO 22 Combination 32.186 9.711 0.031 -0.039 -0.008 -2.612
139 0.50 COMBO 22 Combination 32.257 8.240 0.031 -0.039 -0.016 -4.856
139 0.00 COMBO 23 Combination 36.573 45.052 0.062 -0.073 0.000 0.000
139 0.25 COMBO 23 Combination 36.644 46.279 0.062 -0.073 -0.016 -11.416
139 0.50 COMBO 23 Combination 36.715 47.506 0.062 -0.073 -0.031 -23.140
139 0.00 COMBO 24 Combination 11.590 12.445 0.019 -0.021 0.000 0.000
139 0.25 COMBO 24 Combination 11.661 12.840 0.019 -0.021 -0.005 -3.161
139 0.50 COMBO 24 Combination 11.732 13.234 0.019 -0.021 -0.009 -6.420
139 0.00 COMBO 25 Combination 45.264 45.223 0.064 -0.075 0.000 0.000
139 0.25 COMBO 25 Combination 45.335 46.681 0.064 -0.075 -0.016 -11.488
139 0.50 COMBO 25 Combination 45.405 48.139 0.064 -0.075 -0.032 -23.341
139 0.00 COMBO 26 Combination 33.788 47.084 0.052 -0.065 0.000 0.000
139 0.25 COMBO 26 Combination 33.859 48.542 0.052 -0.065 -0.013 -11.953
139 0.50 COMBO 26 Combination 33.929 50.000 0.052 -0.065 -0.026 -24.271
139 0.00 COMBO 27 Combination -13.623 -13.389 -0.004 0.002 0.000 0.000
139 0.25 COMBO 27 Combination -13.552 -13.389 -0.004 0.002 0.001 3.347
139 0.50 COMBO 27 Combination -13.481 -13.389 -0.004 0.002 0.002 6.695
139 0.00 COMBO 28 Combination -13.894 -11.218 -0.019 0.022 0.000 0.000
139 0.25 COMBO 28 Combination -13.823 -11.218 -0.019 0.022 0.005 2.805
139 0.50 COMBO 28 Combination -13.752 -11.218 -0.019 0.022 0.010 5.609
139 0.00 COMBO 29 Combination 19.027 8.680 0.017 -0.021 0.000 0.000
139 0.25 COMBO 29 Combination 19.098 8.201 0.017 -0.021 -0.004 -2.110
139 0.50 COMBO 29 Combination 19.168 7.722 0.017 -0.021 -0.008 -4.101

166
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
1. Element Forces Frame K2
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
139 0.00 COMBO 30 Combination 0.305 -15.781 -0.016 0.017 0.000 0.000
139 0.25 COMBO 30 Combination 0.376 -16.884 -0.016 0.017 0.004 4.083
139 0.50 COMBO 30 Combination 0.447 -17.988 -0.016 0.017 0.008 8.442
139 0.00 COMBO 31 Combination 3.649 9.621 0.008 -0.008 0.000 0.000
139 0.25 COMBO 31 Combination 3.720 10.541 0.008 -0.008 -0.002 -2.520
139 0.50 COMBO 31 Combination 3.790 11.462 0.008 -0.008 -0.004 -5.271
139 0.00 COMBO 32 Combination -15.089 -14.834 -0.025 0.031 0.000 0.000
139 0.25 COMBO 32 Combination -15.018 -14.538 -0.025 0.031 0.006 3.672
139 0.50 COMBO 32 Combination -14.947 -14.242 -0.025 0.031 0.012 7.269
139 0.00 COMBO 33 Combination 10.167 9.749 0.009 -0.009 0.000 0.000
139 0.25 COMBO 33 Combination 10.238 10.843 0.009 -0.009 -0.002 -2.574
139 0.50 COMBO 33 Combination 10.309 11.937 0.009 -0.009 -0.005 -5.422
139 0.00 COMBO 34 Combination 1.560 11.145 0.000 -0.002 0.000 0.000
139 0.25 COMBO 34 Combination 1.631 12.239 0.000 -0.002 0.000 -2.923
139 0.50 COMBO 34 Combination 1.701 13.332 0.000 -0.002 0.000 -6.119
139 0.00 COMBO 35 Combination 19.027 8.680 0.017 -0.021 0.000 0.000
139 0.25 COMBO 35 Combination 19.098 8.201 0.017 -0.021 -0.004 -2.110
139 0.50 COMBO 35 Combination 19.168 7.722 0.017 -0.021 -0.008 -4.101
139 0.00 COMBO 36 Combination 19.027 8.680 0.017 -0.021 0.000 0.000
139 0.25 COMBO 36 Combination 19.098 8.201 0.017 -0.021 -0.004 -2.110
139 0.50 COMBO 36 Combination 19.168 7.722 0.017 -0.021 -0.008 -4.101
139 0.00 COMBO 37 Combination 0.305 -15.781 -0.016 0.017 0.000 0.000
139 0.25 COMBO 37 Combination 0.376 -16.884 -0.016 0.017 0.004 4.083
139 0.50 COMBO 37 Combination 0.447 -17.988 -0.016 0.017 0.008 8.442
139 0.00 COMBO 38 Combination 0.305 -15.781 -0.016 0.017 0.000 0.000
139 0.25 COMBO 38 Combination 0.376 -16.884 -0.016 0.017 0.004 4.083
139 0.50 COMBO 38 Combination 0.447 -17.988 -0.016 0.017 0.008 8.442
139 0.00 COMBO 39 Combination 3.649 9.621 0.008 -0.008 0.000 0.000
139 0.25 COMBO 39 Combination 3.720 10.541 0.008 -0.008 -0.002 -2.520
139 0.50 COMBO 39 Combination 3.790 11.462 0.008 -0.008 -0.004 -5.271
139 0.00 COMBO 40 Combination 3.649 9.621 0.008 -0.008 0.000 0.000
139 0.25 COMBO 40 Combination 3.720 10.541 0.008 -0.008 -0.002 -2.520
139 0.50 COMBO 40 Combination 3.790 11.462 0.008 -0.008 -0.004 -5.271
139 0.00 COMBO 41 Combination -15.089 -14.834 -0.025 0.031 0.000 0.000
139 0.25 COMBO 41 Combination -15.018 -14.538 -0.025 0.031 0.006 3.672
139 0.50 COMBO 41 Combination -14.947 -14.242 -0.025 0.031 0.012 7.269
139 0.00 COMBO 42 Combination -15.089 -14.834 -0.025 0.031 0.000 0.000
139 0.25 COMBO 42 Combination -15.018 -14.538 -0.025 0.031 0.006 3.672
139 0.50 COMBO 42 Combination -14.947 -14.242 -0.025 0.031 0.012 7.269
139 0.00 COMBO 43 Combination 10.167 9.749 0.009 -0.009 0.000 0.000
139 0.25 COMBO 43 Combination 10.238 10.843 0.009 -0.009 -0.002 -2.574
139 0.50 COMBO 43 Combination 10.309 11.937 0.009 -0.009 -0.005 -5.422
139 0.00 COMBO 44 Combination 10.167 9.749 0.009 -0.009 0.000 0.000
139 0.25 COMBO 44 Combination 10.238 10.843 0.009 -0.009 -0.002 -2.574
139 0.50 COMBO 44 Combination 10.309 11.937 0.009 -0.009 -0.005 -5.422
139 0.00 COMBO 45 Combination 1.560 11.145 0.000 -0.002 0.000 0.000
139 0.25 COMBO 45 Combination 1.631 12.239 0.000 -0.002 0.000 -2.923

167
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
1. Element Forces Frame K2
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
139 0.50 COMBO 45 Combination 1.701 13.332 0.000 -0.002 0.000 -6.119
139 0.00 COMBO 46 Combination 1.560 11.145 0.000 -0.002 0.000 0.000
139 0.25 COMBO 46 Combination 1.631 12.239 0.000 -0.002 0.000 -2.923
139 0.50 COMBO 46 Combination 1.701 13.332 0.000 -0.002 0.000 -6.119
139 0.00 COMBO 47 Combination 19.027 8.680 0.017 -0.021 0.000 0.000
139 0.25 COMBO 47 Combination 19.098 8.201 0.017 -0.021 -0.004 -2.110
139 0.50 COMBO 47 Combination 19.168 7.722 0.017 -0.021 -0.008 -4.101
139 0.00 COMBO 48 Combination 19.027 8.680 0.017 -0.021 0.000 0.000
139 0.25 COMBO 48 Combination 19.098 8.201 0.017 -0.021 -0.004 -2.110
139 0.50 COMBO 48 Combination 19.168 7.722 0.017 -0.021 -0.008 -4.101
139 0.00 COMBO 49 Combination 0.305 -15.781 -0.016 0.017 0.000 0.000
139 0.25 COMBO 49 Combination 0.376 -16.884 -0.016 0.017 0.004 4.083
139 0.50 COMBO 49 Combination 0.447 -17.988 -0.016 0.017 0.008 8.442
139 0.00 COMBO 50 Combination 0.305 -15.781 -0.016 0.017 0.000 0.000
139 0.25 COMBO 50 Combination 0.376 -16.884 -0.016 0.017 0.004 4.083
139 0.50 COMBO 50 Combination 0.447 -17.988 -0.016 0.017 0.008 8.442
139 0.00 COMBO 51 Combination 3.649 9.621 0.008 -0.008 0.000 0.000
139 0.25 COMBO 51 Combination 3.720 10.541 0.008 -0.008 -0.002 -2.520
139 0.50 COMBO 51 Combination 3.790 11.462 0.008 -0.008 -0.004 -5.271
139 0.00 COMBO 52 Combination 3.649 9.621 0.008 -0.008 0.000 0.000
139 0.25 COMBO 52 Combination 3.720 10.541 0.008 -0.008 -0.002 -2.520
139 0.50 COMBO 52 Combination 3.790 11.462 0.008 -0.008 -0.004 -5.271
139 0.00 COMBO 53 Combination -15.089 -14.834 -0.025 0.031 0.000 0.000
139 0.25 COMBO 53 Combination -15.018 -14.538 -0.025 0.031 0.006 3.672
139 0.50 COMBO 53 Combination -14.947 -14.242 -0.025 0.031 0.012 7.269
139 0.00 COMBO 54 Combination -15.089 -14.834 -0.025 0.031 0.000 0.000
139 0.25 COMBO 54 Combination -15.018 -14.538 -0.025 0.031 0.006 3.672
139 0.50 COMBO 54 Combination -14.947 -14.242 -0.025 0.031 0.012 7.269
139 0.00 COMBO 55 Combination 10.167 9.749 0.009 -0.009 0.000 0.000
139 0.25 COMBO 55 Combination 10.238 10.843 0.009 -0.009 -0.002 -2.574
139 0.50 COMBO 55 Combination 10.309 11.937 0.009 -0.009 -0.005 -5.422
139 0.00 COMBO 56 Combination 10.167 9.749 0.009 -0.009 0.000 0.000
139 0.25 COMBO 56 Combination 10.238 10.843 0.009 -0.009 -0.002 -2.574
139 0.50 COMBO 56 Combination 10.309 11.937 0.009 -0.009 -0.005 -5.422
139 0.00 COMBO 57 Combination 1.560 11.145 0.000 -0.002 0.000 0.000
139 0.25 COMBO 57 Combination 1.631 12.239 0.000 -0.002 0.000 -2.923
139 0.50 COMBO 57 Combination 1.701 13.332 0.000 -0.002 0.000 -6.119
139 0.00 COMBO 58 Combination 1.560 11.145 0.000 -0.002 0.000 0.000
139 0.25 COMBO 58 Combination 1.631 12.239 0.000 -0.002 0.000 -2.923
139 0.50 COMBO 58 Combination 1.701 13.332 0.000 -0.002 0.000 -6.119
139 0.00 COMBO 59 Combination 39.199 29.101 0.050 -0.061 0.000 0.000
139 0.25 COMBO 59 Combination 39.270 28.622 0.050 -0.061 -0.012 -7.215
139 0.50 COMBO 59 Combination 39.341 28.143 0.050 -0.061 -0.025 -14.311
139 0.00 COMBO 60 Combination 20.478 4.640 0.017 -0.022 0.000 0.000
139 0.25 COMBO 60 Combination 20.549 3.536 0.017 -0.022 -0.004 -1.022
139 0.50 COMBO 60 Combination 20.620 2.433 0.017 -0.022 -0.009 -1.768
139 0.00 COMBO 61 Combination 23.821 30.042 0.041 -0.047 0.000 0.000

168
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
1. Element Forces Frame K2
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
139 0.25 COMBO 61 Combination 23.892 30.962 0.041 -0.047 -0.010 -7.626
139 0.50 COMBO 61 Combination 23.963 31.882 0.041 -0.047 -0.020 -15.481
139 0.00 COMBO 62 Combination 5.084 5.587 0.008 -0.009 0.000 0.000
139 0.25 COMBO 62 Combination 5.155 5.883 0.008 -0.009 -0.002 -1.434
139 0.50 COMBO 62 Combination 5.226 6.179 0.008 -0.009 -0.004 -2.941
139 0.00 COMBO 63 Combination 30.339 30.170 0.042 -0.049 0.000 0.000
139 0.25 COMBO 63 Combination 30.410 31.264 0.042 -0.049 -0.011 -7.679
139 0.50 COMBO 63 Combination 30.481 32.357 0.042 -0.049 -0.021 -15.632
139 0.00 COMBO 64 Combination 21.732 31.566 0.033 -0.041 0.000 0.000
139 0.25 COMBO 64 Combination 21.803 32.660 0.033 -0.041 -0.008 -8.028
139 0.50 COMBO 64 Combination 21.874 33.753 0.033 -0.041 -0.017 -16.330
139 0.00 COMBO 65 Combination 19.027 8.680 0.017 -0.021 0.000 0.000
139 0.25 COMBO 65 Combination 19.098 8.201 0.017 -0.021 -0.004 -2.110
139 0.50 COMBO 65 Combination 19.168 7.722 0.017 -0.021 -0.008 -4.101
139 0.00 COMBO 66 Combination 0.305 -15.781 -0.016 0.017 0.000 0.000
139 0.25 COMBO 66 Combination 0.376 -16.884 -0.016 0.017 0.004 4.083
139 0.50 COMBO 66 Combination 0.447 -17.988 -0.016 0.017 0.008 8.442
139 0.00 COMBO 67 Combination 3.649 9.621 0.008 -0.008 0.000 0.000
139 0.25 COMBO 67 Combination 3.720 10.541 0.008 -0.008 -0.002 -2.520
139 0.50 COMBO 67 Combination 3.790 11.462 0.008 -0.008 -0.004 -5.271
139 0.00 COMBO 68 Combination -15.089 -14.834 -0.025 0.031 0.000 0.000
139 0.25 COMBO 68 Combination -15.018 -14.538 -0.025 0.031 0.006 3.672
139 0.50 COMBO 68 Combination -14.947 -14.242 -0.025 0.031 0.012 7.269
139 0.00 COMBO 69 Combination 10.167 9.749 0.009 -0.009 0.000 0.000
139 0.25 COMBO 69 Combination 10.238 10.843 0.009 -0.009 -0.002 -2.574
139 0.50 COMBO 69 Combination 10.309 11.937 0.009 -0.009 -0.005 -5.422
139 0.00 COMBO 70 Combination 1.560 11.145 0.000 -0.002 0.000 0.000
139 0.25 COMBO 70 Combination 1.631 12.239 0.000 -0.002 0.000 -2.923
139 0.50 COMBO 70 Combination 1.701 13.332 0.000 -0.002 0.000 -6.119
139 0.00 COMBO 71 Combination 39.199 29.101 0.050 -0.061 0.000 0.000
139 0.25 COMBO 71 Combination 39.270 28.622 0.050 -0.061 -0.012 -7.215
139 0.50 COMBO 71 Combination 39.341 28.143 0.050 -0.061 -0.025 -14.311
139 0.00 COMBO 72 Combination 39.199 29.101 0.050 -0.061 0.000 0.000
139 0.25 COMBO 72 Combination 39.270 28.622 0.050 -0.061 -0.012 -7.215
139 0.50 COMBO 72 Combination 39.341 28.143 0.050 -0.061 -0.025 -14.311
139 0.00 COMBO 73 Combination 20.478 4.640 0.017 -0.022 0.000 0.000
139 0.25 COMBO 73 Combination 20.549 3.536 0.017 -0.022 -0.004 -1.022
139 0.50 COMBO 73 Combination 20.620 2.433 0.017 -0.022 -0.009 -1.768
139 0.00 COMBO 74 Combination 20.478 4.640 0.017 -0.022 0.000 0.000
139 0.25 COMBO 74 Combination 20.549 3.536 0.017 -0.022 -0.004 -1.022
139 0.50 COMBO 74 Combination 20.620 2.433 0.017 -0.022 -0.009 -1.768
139 0.00 COMBO 75 Combination 23.821 30.042 0.041 -0.047 0.000 0.000
139 0.25 COMBO 75 Combination 23.892 30.962 0.041 -0.047 -0.010 -7.626
139 0.50 COMBO 75 Combination 23.963 31.882 0.041 -0.047 -0.020 -15.481
139 0.00 COMBO 76 Combination 23.821 30.042 0.041 -0.047 0.000 0.000
139 0.25 COMBO 76 Combination 23.892 30.962 0.041 -0.047 -0.010 -7.626
139 0.50 COMBO 76 Combination 23.963 31.882 0.041 -0.047 -0.020 -15.481

169
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
1. Element Forces Frame K2
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
139 0.00 COMBO 77 Combination 5.084 5.587 0.008 -0.009 0.000 0.000
139 0.25 COMBO 77 Combination 5.155 5.883 0.008 -0.009 -0.002 -1.434
139 0.50 COMBO 77 Combination 5.226 6.179 0.008 -0.009 -0.004 -2.941
139 0.00 COMBO 78 Combination 5.084 5.587 0.008 -0.009 0.000 0.000
139 0.25 COMBO 78 Combination 5.155 5.883 0.008 -0.009 -0.002 -1.434
139 0.50 COMBO 78 Combination 5.226 6.179 0.008 -0.009 -0.004 -2.941
139 0.00 COMBO 79 Combination 30.339 30.170 0.042 -0.049 0.000 0.000
139 0.25 COMBO 79 Combination 30.410 31.264 0.042 -0.049 -0.011 -7.679
139 0.50 COMBO 79 Combination 30.481 32.357 0.042 -0.049 -0.021 -15.632
139 0.00 COMBO 80 Combination 30.339 30.170 0.042 -0.049 0.000 0.000
139 0.25 COMBO 80 Combination 30.410 31.264 0.042 -0.049 -0.011 -7.679
139 0.50 COMBO 80 Combination 30.481 32.357 0.042 -0.049 -0.021 -15.632
139 0.00 COMBO 81 Combination 21.732 31.566 0.033 -0.041 0.000 0.000
139 0.25 COMBO 81 Combination 21.803 32.660 0.033 -0.041 -0.008 -8.028
139 0.50 COMBO 81 Combination 21.874 33.753 0.033 -0.041 -0.017 -16.330
139 0.00 COMBO 82 Combination 21.732 31.566 0.033 -0.041 0.000 0.000
139 0.25 COMBO 82 Combination 21.803 32.660 0.033 -0.041 -0.008 -8.028
139 0.50 COMBO 82 Combination 21.874 33.753 0.033 -0.041 -0.017 -16.330
139 0.00 COMBO 83 Combination 39.199 29.101 0.050 -0.061 0.000 0.000
139 0.25 COMBO 83 Combination 39.270 28.622 0.050 -0.061 -0.012 -7.215
139 0.50 COMBO 83 Combination 39.341 28.143 0.050 -0.061 -0.025 -14.311
139 0.00 COMBO 84 Combination 39.199 29.101 0.050 -0.061 0.000 0.000
139 0.25 COMBO 84 Combination 39.270 28.622 0.050 -0.061 -0.012 -7.215
139 0.50 COMBO 84 Combination 39.341 28.143 0.050 -0.061 -0.025 -14.311
139 0.00 COMBO 85 Combination 20.478 4.640 0.017 -0.022 0.000 0.000
139 0.25 COMBO 85 Combination 20.549 3.536 0.017 -0.022 -0.004 -1.022
139 0.50 COMBO 85 Combination 20.620 2.433 0.017 -0.022 -0.009 -1.768
139 0.00 COMBO 86 Combination 20.478 4.640 0.017 -0.022 0.000 0.000
139 0.25 COMBO 86 Combination 20.549 3.536 0.017 -0.022 -0.004 -1.022
139 0.50 COMBO 86 Combination 20.620 2.433 0.017 -0.022 -0.009 -1.768
139 0.00 COMBO 87 Combination 23.821 30.042 0.041 -0.047 0.000 0.000
139 0.25 COMBO 87 Combination 23.892 30.962 0.041 -0.047 -0.010 -7.626
139 0.50 COMBO 87 Combination 23.963 31.882 0.041 -0.047 -0.020 -15.481
139 0.00 COMBO 88 Combination 23.821 30.042 0.041 -0.047 0.000 0.000
139 0.25 COMBO 88 Combination 23.892 30.962 0.041 -0.047 -0.010 -7.626
139 0.50 COMBO 88 Combination 23.963 31.882 0.041 -0.047 -0.020 -15.481
139 0.00 COMBO 89 Combination 5.084 5.587 0.008 -0.009 0.000 0.000
139 0.25 COMBO 89 Combination 5.155 5.883 0.008 -0.009 -0.002 -1.434
139 0.50 COMBO 89 Combination 5.226 6.179 0.008 -0.009 -0.004 -2.941
139 0.00 COMBO 90 Combination 5.084 5.587 0.008 -0.009 0.000 0.000
139 0.25 COMBO 90 Combination 5.155 5.883 0.008 -0.009 -0.002 -1.434
139 0.50 COMBO 90 Combination 5.226 6.179 0.008 -0.009 -0.004 -2.941
139 0.00 COMBO 91 Combination 30.339 30.170 0.042 -0.049 0.000 0.000
139 0.25 COMBO 91 Combination 30.410 31.264 0.042 -0.049 -0.011 -7.679
139 0.50 COMBO 91 Combination 30.481 32.357 0.042 -0.049 -0.021 -15.632
139 0.00 COMBO 92 Combination 30.339 30.170 0.042 -0.049 0.000 0.000
139 0.25 COMBO 92 Combination 30.410 31.264 0.042 -0.049 -0.011 -7.679

170
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
1. Element Forces Frame K2
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
139 0.50 COMBO 92 Combination 30.481 32.357 0.042 -0.049 -0.021 -15.632
139 0.00 COMBO 93 Combination 21.732 31.566 0.033 -0.041 0.000 0.000
139 0.25 COMBO 93 Combination 21.803 32.660 0.033 -0.041 -0.008 -8.028
139 0.50 COMBO 93 Combination 21.874 33.753 0.033 -0.041 -0.017 -16.330
139 0.00 COMBO 94 Combination 21.732 31.566 0.033 -0.041 0.000 0.000
139 0.25 COMBO 94 Combination 21.803 32.660 0.033 -0.041 -0.008 -8.028
139 0.50 COMBO 94 Combination 21.874 33.753 0.033 -0.041 -0.017 -16.330
139 0.00 COMBO 95 Combination -13.826 -13.789 -0.009 0.009 0.000 0.000
139 0.25 COMBO 95 Combination -13.755 -13.789 -0.009 0.009 0.002 3.447
139 0.50 COMBO 95 Combination -13.684 -13.789 -0.009 0.009 0.004 6.895
139 0.00 COMBO 96 Combination -13.826 -13.789 -0.009 0.009 0.000 0.000
139 0.25 COMBO 96 Combination -13.755 -13.789 -0.009 0.009 0.002 3.447
139 0.50 COMBO 96 Combination -13.684 -13.789 -0.009 0.009 0.004 6.895
139 0.00 COMBO 97 Combination -14.029 -12.161 -0.020 0.024 0.000 0.000
139 0.25 COMBO 97 Combination -13.958 -12.161 -0.020 0.024 0.005 3.040
139 0.50 COMBO 97 Combination -13.887 -12.161 -0.020 0.024 0.010 6.080
139 0.00 COMBO 98 Combination -14.029 -12.161 -0.020 0.024 0.000 0.000
139 0.25 COMBO 98 Combination -13.958 -12.161 -0.020 0.024 0.005 3.040
139 0.50 COMBO 98 Combination -13.887 -12.161 -0.020 0.024 0.010 6.080
139 0.00 COMBO 99 Combination -13.826 -13.789 -0.009 0.009 0.000 0.000
139 0.25 COMBO 99 Combination -13.755 -13.789 -0.009 0.009 0.002 3.447
139 0.50 COMBO 99 Combination -13.684 -13.789 -0.009 0.009 0.004 6.895
139 0.00 COMBO 100 Combination -14.029 -12.161 -0.020 0.024 0.000 0.000
139 0.25 COMBO 100 Combination -13.958 -12.161 -0.020 0.024 0.005 3.040
139 0.50 COMBO 100 Combination -13.887 -12.161 -0.020 0.024 0.010 6.080
139 0.00 COMBO 101 Combination -13.826 -13.789 -0.009 0.009 0.000 0.000
139 0.25 COMBO 101 Combination -13.755 -13.789 -0.009 0.009 0.002 3.447
139 0.50 COMBO 101 Combination -13.684 -13.789 -0.009 0.009 0.004 6.895
139 0.00 COMBO 102 Combination -13.826 -13.789 -0.009 0.009 0.000 0.000
139 0.25 COMBO 102 Combination -13.755 -13.789 -0.009 0.009 0.002 3.447
139 0.50 COMBO 102 Combination -13.684 -13.789 -0.009 0.009 0.004 6.895
139 0.00 COMBO 103 Combination -14.029 -12.161 -0.020 0.024 0.000 0.000
139 0.25 COMBO 103 Combination -13.958 -12.161 -0.020 0.024 0.005 3.040
139 0.50 COMBO 103 Combination -13.887 -12.161 -0.020 0.024 0.010 6.080
139 0.00 COMBO 104 Combination -14.029 -12.161 -0.020 0.024 0.000 0.000
139 0.25 COMBO 104 Combination -13.958 -12.161 -0.020 0.024 0.005 3.040
139 0.50 COMBO 104 Combination -13.887 -12.161 -0.020 0.024 0.010 6.080
139 0.00 COMBO 105 Combination 62.850 49.793 0.084 -0.102 0.000 0.000
139 0.25 COMBO 105 Combination 62.893 49.154 0.084 -0.102 -0.021 -12.368
139 0.50 COMBO 105 Combination 62.935 48.515 0.084 -0.102 -0.042 -24.577
139 0.00 COMBO 106 Combination 37.888 17.178 0.041 -0.051 0.000 0.000
139 0.25 COMBO 106 Combination 37.931 15.707 0.041 -0.051 -0.010 -4.111
139 0.50 COMBO 106 Combination 37.973 14.235 0.041 -0.051 -0.021 -7.853
139 0.00 COMBO 107 Combination 42.347 51.048 0.072 -0.084 0.000 0.000
139 0.25 COMBO 107 Combination 42.389 52.275 0.072 -0.084 -0.018 -12.915
139 0.50 COMBO 107 Combination 42.432 53.502 0.072 -0.084 -0.036 -26.137
139 0.00 COMBO 108 Combination 17.363 18.441 0.029 -0.033 0.000 0.000

171
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
1. Element Forces Frame K2
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
139 0.25 COMBO 108 Combination 17.406 18.835 0.029 -0.033 -0.007 -4.660
139 0.50 COMBO 108 Combination 17.448 19.230 0.029 -0.033 -0.014 -9.418
139 0.00 COMBO 109 Combination 51.037 51.219 0.074 -0.086 0.000 0.000
139 0.25 COMBO 109 Combination 51.080 52.677 0.074 -0.086 -0.018 -12.987
139 0.50 COMBO 109 Combination 51.122 54.135 0.074 -0.086 -0.037 -26.338
139 0.00 COMBO 110 Combination 39.561 53.080 0.062 -0.076 0.000 0.000
139 0.25 COMBO 110 Combination 39.604 54.538 0.062 -0.076 -0.016 -13.452
139 0.50 COMBO 110 Combination 39.646 55.996 0.062 -0.076 -0.031 -27.269
139 0.00 COMBO 111 Combination -7.849 -7.394 0.006 -0.009 0.000 0.000
139 0.25 COMBO 111 Combination -7.807 -7.394 0.006 -0.009 -0.002 1.848
139 0.50 COMBO 111 Combination -7.764 -7.394 0.006 -0.009 -0.003 3.697
139 0.00 COMBO 112 Combination -8.121 -5.223 -0.010 0.010 0.000 0.000
139 0.25 COMBO 112 Combination -8.078 -5.223 -0.010 0.010 0.002 1.306
139 0.50 COMBO 112 Combination -8.036 -5.223 -0.010 0.010 0.005 2.611
773 0.00 COMBO 1 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 1 Combination 0.108 0.642 0.000 0.000 0.000 -0.220
773 1.37 COMBO 1 Combination 0.216 1.284 0.000 0.000 0.000 -0.879
773 0.00 COMBO 2 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 2 Combination 0.448 2.667 0.000 0.000 0.000 -0.913
773 1.37 COMBO 2 Combination 0.896 5.334 0.000 0.000 0.000 -3.651
773 0.00 COMBO 3 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 3 Combination 0.108 -7.296 0.000 0.000 0.000 2.497
773 1.37 COMBO 3 Combination 0.216 -14.593 0.000 0.000 0.000 9.988
773 0.00 COMBO 4 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 4 Combination 0.108 -7.296 0.000 0.000 0.000 2.497
773 1.37 COMBO 4 Combination 0.216 -14.593 0.000 0.000 0.000 9.988
773 0.00 COMBO 5 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 5 Combination 0.108 -1.937 0.000 0.000 0.000 0.663
773 1.37 COMBO 5 Combination 0.216 -3.874 0.000 0.000 0.000 2.652
773 0.00 COMBO 6 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 6 Combination 0.108 -1.937 0.000 0.000 0.000 0.663
773 1.37 COMBO 6 Combination 0.216 -3.874 0.000 0.000 0.000 2.652
773 0.00 COMBO 7 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 7 Combination 0.108 -1.937 0.000 0.000 0.000 0.663
773 1.37 COMBO 7 Combination 0.216 -3.874 0.000 0.000 0.000 2.652
773 0.00 COMBO 8 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 8 Combination 0.108 -1.937 0.000 0.000 0.000 0.663
773 1.37 COMBO 8 Combination 0.216 -3.874 0.000 0.000 0.000 2.652
773 0.00 COMBO 9 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 9 Combination 0.165 0.979 0.000 0.000 0.000 -0.335
773 1.37 COMBO 9 Combination 0.329 1.959 0.000 0.000 0.000 -1.341
773 0.00 COMBO 10 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 10 Combination 0.505 3.004 0.000 0.000 0.000 -1.028
773 1.37 COMBO 10 Combination 1.009 6.009 0.000 0.000 0.000 -4.113
773 0.00 COMBO 11 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 11 Combination 0.165 0.979 0.000 0.000 0.000 -0.335
773 1.37 COMBO 11 Combination 0.329 1.959 0.000 0.000 0.000 -1.341

172
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
1. Element Forces Frame K2
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
773 0.00 COMBO 12 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 12 Combination 0.165 0.979 0.000 0.000 0.000 -0.335
773 1.37 COMBO 12 Combination 0.329 1.959 0.000 0.000 0.000 -1.341
773 0.00 COMBO 13 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 13 Combination 0.165 0.979 0.000 0.000 0.000 -0.335
773 1.37 COMBO 13 Combination 0.329 1.959 0.000 0.000 0.000 -1.341
773 0.00 COMBO 14 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 14 Combination 0.420 2.498 0.000 0.000 0.000 -0.855
773 1.37 COMBO 14 Combination 0.839 4.996 0.000 0.000 0.000 -3.420
773 0.00 COMBO 15 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 15 Combination 0.420 2.498 0.000 0.000 0.000 -0.855
773 1.37 COMBO 15 Combination 0.839 4.996 0.000 0.000 0.000 -3.420
773 0.00 COMBO 16 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 16 Combination 0.420 2.498 0.000 0.000 0.000 -0.855
773 1.37 COMBO 16 Combination 0.839 4.996 0.000 0.000 0.000 -3.420
773 0.00 COMBO 17 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 17 Combination 0.165 0.979 0.000 0.000 0.000 -0.335
773 1.37 COMBO 17 Combination 0.329 1.959 0.000 0.000 0.000 -1.341
773 0.00 COMBO 18 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 18 Combination 0.165 0.979 0.000 0.000 0.000 -0.335
773 1.37 COMBO 18 Combination 0.329 1.959 0.000 0.000 0.000 -1.341
773 0.00 COMBO 19 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 19 Combination 0.420 2.498 0.000 0.000 0.000 -0.855
773 1.37 COMBO 19 Combination 0.839 4.996 0.000 0.000 0.000 -3.420
773 0.00 COMBO 20 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 20 Combination 0.420 2.498 0.000 0.000 0.000 -0.855
773 1.37 COMBO 20 Combination 0.839 4.996 0.000 0.000 0.000 -3.420
773 0.00 COMBO 21 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 21 Combination 0.165 -6.959 0.000 0.000 0.000 2.382
773 1.37 COMBO 21 Combination 0.329 -13.918 0.000 0.000 0.000 9.526
773 0.00 COMBO 22 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 22 Combination 0.165 -6.959 0.000 0.000 0.000 2.382
773 1.37 COMBO 22 Combination 0.329 -13.918 0.000 0.000 0.000 9.526
773 0.00 COMBO 23 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 23 Combination 0.165 -1.600 0.000 0.000 0.000 0.547
773 1.37 COMBO 23 Combination 0.329 -3.199 0.000 0.000 0.000 2.190
773 0.00 COMBO 24 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 24 Combination 0.165 -1.600 0.000 0.000 0.000 0.547
773 1.37 COMBO 24 Combination 0.329 -3.199 0.000 0.000 0.000 2.190
773 0.00 COMBO 25 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 25 Combination 0.165 -1.600 0.000 0.000 0.000 0.547
773 1.37 COMBO 25 Combination 0.329 -3.199 0.000 0.000 0.000 2.190
773 0.00 COMBO 26 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 26 Combination 0.165 -1.600 0.000 0.000 0.000 0.547
773 1.37 COMBO 26 Combination 0.329 -3.199 0.000 0.000 0.000 2.190
773 0.00 COMBO 27 Combination 0.000 0.000 0.236 0.000 0.000 0.000
773 0.68 COMBO 27 Combination 0.165 0.979 0.236 0.000 -0.162 -0.335

173
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
1. Element Forces Frame K2
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
773 1.37 COMBO 27 Combination 0.329 1.959 0.236 0.000 -0.323 -1.341
773 0.00 COMBO 28 Combination -0.233 0.039 0.000 0.000 0.000 0.000
773 0.68 COMBO 28 Combination -0.068 1.019 0.000 0.000 0.000 -0.362
773 1.37 COMBO 28 Combination 0.096 1.998 0.000 0.000 0.000 -1.394
773 0.00 COMBO 29 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 29 Combination 0.420 -3.456 0.000 0.000 0.000 1.183
773 1.37 COMBO 29 Combination 0.839 -6.911 0.000 0.000 0.000 4.730
773 0.00 COMBO 30 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 30 Combination 0.420 -3.456 0.000 0.000 0.000 1.183
773 1.37 COMBO 30 Combination 0.839 -6.911 0.000 0.000 0.000 4.730
773 0.00 COMBO 31 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 31 Combination 0.420 0.564 0.000 0.000 0.000 -0.193
773 1.37 COMBO 31 Combination 0.839 1.128 0.000 0.000 0.000 -0.772
773 0.00 COMBO 32 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 32 Combination 0.420 0.564 0.000 0.000 0.000 -0.193
773 1.37 COMBO 32 Combination 0.839 1.128 0.000 0.000 0.000 -0.772
773 0.00 COMBO 33 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 33 Combination 0.420 0.564 0.000 0.000 0.000 -0.193
773 1.37 COMBO 33 Combination 0.839 1.128 0.000 0.000 0.000 -0.772
773 0.00 COMBO 34 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 34 Combination 0.420 0.564 0.000 0.000 0.000 -0.193
773 1.37 COMBO 34 Combination 0.839 1.128 0.000 0.000 0.000 -0.772
773 0.00 COMBO 35 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 35 Combination 0.420 -3.456 0.000 0.000 0.000 1.183
773 1.37 COMBO 35 Combination 0.839 -6.911 0.000 0.000 0.000 4.730
773 0.00 COMBO 36 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 36 Combination 0.420 -3.456 0.000 0.000 0.000 1.183
773 1.37 COMBO 36 Combination 0.839 -6.911 0.000 0.000 0.000 4.730
773 0.00 COMBO 37 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 37 Combination 0.420 -3.456 0.000 0.000 0.000 1.183
773 1.37 COMBO 37 Combination 0.839 -6.911 0.000 0.000 0.000 4.730
773 0.00 COMBO 38 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 38 Combination 0.420 -3.456 0.000 0.000 0.000 1.183
773 1.37 COMBO 38 Combination 0.839 -6.911 0.000 0.000 0.000 4.730
773 0.00 COMBO 39 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 39 Combination 0.420 0.564 0.000 0.000 0.000 -0.193
773 1.37 COMBO 39 Combination 0.839 1.128 0.000 0.000 0.000 -0.772
773 0.00 COMBO 40 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 40 Combination 0.420 0.564 0.000 0.000 0.000 -0.193
773 1.37 COMBO 40 Combination 0.839 1.128 0.000 0.000 0.000 -0.772
773 0.00 COMBO 41 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 41 Combination 0.420 0.564 0.000 0.000 0.000 -0.193
773 1.37 COMBO 41 Combination 0.839 1.128 0.000 0.000 0.000 -0.772
773 0.00 COMBO 42 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 42 Combination 0.420 0.564 0.000 0.000 0.000 -0.193
773 1.37 COMBO 42 Combination 0.839 1.128 0.000 0.000 0.000 -0.772
773 0.00 COMBO 43 Combination 0.000 0.000 0.000 0.000 0.000 0.000

174
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
1. Element Forces Frame K2
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
773 0.68 COMBO 43 Combination 0.420 0.564 0.000 0.000 0.000 -0.193
773 1.37 COMBO 43 Combination 0.839 1.128 0.000 0.000 0.000 -0.772
773 0.00 COMBO 44 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 44 Combination 0.420 0.564 0.000 0.000 0.000 -0.193
773 1.37 COMBO 44 Combination 0.839 1.128 0.000 0.000 0.000 -0.772
773 0.00 COMBO 45 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 45 Combination 0.420 0.564 0.000 0.000 0.000 -0.193
773 1.37 COMBO 45 Combination 0.839 1.128 0.000 0.000 0.000 -0.772
773 0.00 COMBO 46 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 46 Combination 0.420 0.564 0.000 0.000 0.000 -0.193
773 1.37 COMBO 46 Combination 0.839 1.128 0.000 0.000 0.000 -0.772
773 0.00 COMBO 47 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 47 Combination 0.420 -3.456 0.000 0.000 0.000 1.183
773 1.37 COMBO 47 Combination 0.839 -6.911 0.000 0.000 0.000 4.730
773 0.00 COMBO 48 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 48 Combination 0.420 -3.456 0.000 0.000 0.000 1.183
773 1.37 COMBO 48 Combination 0.839 -6.911 0.000 0.000 0.000 4.730
773 0.00 COMBO 49 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 49 Combination 0.420 -3.456 0.000 0.000 0.000 1.183
773 1.37 COMBO 49 Combination 0.839 -6.911 0.000 0.000 0.000 4.730
773 0.00 COMBO 50 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 50 Combination 0.420 -3.456 0.000 0.000 0.000 1.183
773 1.37 COMBO 50 Combination 0.839 -6.911 0.000 0.000 0.000 4.730
773 0.00 COMBO 51 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 51 Combination 0.420 0.564 0.000 0.000 0.000 -0.193
773 1.37 COMBO 51 Combination 0.839 1.128 0.000 0.000 0.000 -0.772
773 0.00 COMBO 52 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 52 Combination 0.420 0.564 0.000 0.000 0.000 -0.193
773 1.37 COMBO 52 Combination 0.839 1.128 0.000 0.000 0.000 -0.772
773 0.00 COMBO 53 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 53 Combination 0.420 0.564 0.000 0.000 0.000 -0.193
773 1.37 COMBO 53 Combination 0.839 1.128 0.000 0.000 0.000 -0.772
773 0.00 COMBO 54 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 54 Combination 0.420 0.564 0.000 0.000 0.000 -0.193
773 1.37 COMBO 54 Combination 0.839 1.128 0.000 0.000 0.000 -0.772
773 0.00 COMBO 55 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 55 Combination 0.420 0.564 0.000 0.000 0.000 -0.193
773 1.37 COMBO 55 Combination 0.839 1.128 0.000 0.000 0.000 -0.772
773 0.00 COMBO 56 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 56 Combination 0.420 0.564 0.000 0.000 0.000 -0.193
773 1.37 COMBO 56 Combination 0.839 1.128 0.000 0.000 0.000 -0.772
773 0.00 COMBO 57 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 57 Combination 0.420 0.564 0.000 0.000 0.000 -0.193
773 1.37 COMBO 57 Combination 0.839 1.128 0.000 0.000 0.000 -0.772
773 0.00 COMBO 58 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 58 Combination 0.420 0.564 0.000 0.000 0.000 -0.193
773 1.37 COMBO 58 Combination 0.839 1.128 0.000 0.000 0.000 -0.772

175
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
1. Element Forces Frame K2
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
773 0.00 COMBO 59 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 59 Combination 0.165 -4.974 0.000 0.000 0.000 1.702
773 1.37 COMBO 59 Combination 0.329 -9.949 0.000 0.000 0.000 6.809
773 0.00 COMBO 60 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 60 Combination 0.165 -4.974 0.000 0.000 0.000 1.702
773 1.37 COMBO 60 Combination 0.329 -9.949 0.000 0.000 0.000 6.809
773 0.00 COMBO 61 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 61 Combination 0.165 -0.955 0.000 0.000 0.000 0.327
773 1.37 COMBO 61 Combination 0.329 -1.910 0.000 0.000 0.000 1.307
773 0.00 COMBO 62 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 62 Combination 0.165 -0.955 0.000 0.000 0.000 0.327
773 1.37 COMBO 62 Combination 0.329 -1.910 0.000 0.000 0.000 1.307
773 0.00 COMBO 63 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 63 Combination 0.165 -0.955 0.000 0.000 0.000 0.327
773 1.37 COMBO 63 Combination 0.329 -1.910 0.000 0.000 0.000 1.307
773 0.00 COMBO 64 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 64 Combination 0.165 -0.955 0.000 0.000 0.000 0.327
773 1.37 COMBO 64 Combination 0.329 -1.910 0.000 0.000 0.000 1.307
773 0.00 COMBO 65 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 65 Combination 0.420 -3.456 0.000 0.000 0.000 1.183
773 1.37 COMBO 65 Combination 0.839 -6.911 0.000 0.000 0.000 4.730
773 0.00 COMBO 66 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 66 Combination 0.420 -3.456 0.000 0.000 0.000 1.183
773 1.37 COMBO 66 Combination 0.839 -6.911 0.000 0.000 0.000 4.730
773 0.00 COMBO 67 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 67 Combination 0.420 0.564 0.000 0.000 0.000 -0.193
773 1.37 COMBO 67 Combination 0.839 1.128 0.000 0.000 0.000 -0.772
773 0.00 COMBO 68 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 68 Combination 0.420 0.564 0.000 0.000 0.000 -0.193
773 1.37 COMBO 68 Combination 0.839 1.128 0.000 0.000 0.000 -0.772
773 0.00 COMBO 69 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 69 Combination 0.420 0.564 0.000 0.000 0.000 -0.193
773 1.37 COMBO 69 Combination 0.839 1.128 0.000 0.000 0.000 -0.772
773 0.00 COMBO 70 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 70 Combination 0.420 0.564 0.000 0.000 0.000 -0.193
773 1.37 COMBO 70 Combination 0.839 1.128 0.000 0.000 0.000 -0.772
773 0.00 COMBO 71 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 71 Combination 0.165 -4.974 0.000 0.000 0.000 1.702
773 1.37 COMBO 71 Combination 0.329 -9.949 0.000 0.000 0.000 6.809
773 0.00 COMBO 72 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 72 Combination 0.165 -4.974 0.000 0.000 0.000 1.702
773 1.37 COMBO 72 Combination 0.329 -9.949 0.000 0.000 0.000 6.809
773 0.00 COMBO 73 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 73 Combination 0.165 -4.974 0.000 0.000 0.000 1.702
773 1.37 COMBO 73 Combination 0.329 -9.949 0.000 0.000 0.000 6.809
773 0.00 COMBO 74 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 74 Combination 0.165 -4.974 0.000 0.000 0.000 1.702

176
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
44 0 COMBO 1 Combination -1.013 -2.698 0.018 0.0027 0.0122 -1.5748
44 0.325 COMBO 1 Combination -0.987 -2.528 0.018 0.0027 0.0063 -0.7159
44 0.65 COMBO 1 Combination -0.963 -2.372 0.018 0.0027 0.00041 0.0893
44 0 COMBO 2 Combination -2.83 -2.419 0.046 0.0068 0.0312 -1.1142
44 0.325 COMBO 2 Combination -2.803 -2.248 0.046 0.0068 0.0161 -0.3472
44 0.65 COMBO 2 Combination -2.779 -2.093 0.046 0.0068 0.001 0.3661
44 0 COMBO 3 Combination -4.28 -2.196 -0.07 -0.0104 -0.0477 -0.7555
44 0.325 COMBO 3 Combination -4.254 -2.025 -0.07 -0.0104 -0.0246 -0.062
44 0.65 COMBO 3 Combination -4.23 -1.869 -0.07 -0.0104 -0.0016 0.5779
44 0 COMBO 4 Combination -5.52 -2.005 -0.067 -0.0099 -0.0454 -0.4416
44 0.325 COMBO 4 Combination -5.494 -1.834 -0.067 -0.0099 -0.0235 0.1892
44 0.65 COMBO 4 Combination -5.47 -1.679 -0.067 -0.0099 -0.0015 0.7664
44 0 COMBO 5 Combination 11.172 -4.573 -0.01 -0.0015 -0.0069 -4.655
44 0.325 COMBO 5 Combination 11.199 -4.403 -0.01 -0.0015 -0.0036 -3.1797
44 0.65 COMBO 5 Combination 11.223 -4.247 -0.01 -0.0015 -0.0002 -1.758
44 0 COMBO 6 Combination 9.795 -4.361 -0.0065 -0.001 -0.0045 -4.3063
44 0.325 COMBO 6 Combination 9.821 -4.191 -0.0065 -0.001 -0.0023 -2.9007
44 0.65 COMBO 6 Combination 9.845 -4.035 -0.0065 -0.001 -0.0001 -1.5487
44 0 COMBO 7 Combination 5.074 -3.635 -0.015 -0.0022 -0.0101 -3.1147
44 0.325 COMBO 7 Combination 5.1 -3.464 -0.015 -0.0022 -0.0052 -1.9479
44 0.65 COMBO 7 Combination 5.124 -3.309 -0.015 -0.0022 -0.0003 -0.8348
44 0 COMBO 8 Combination -2.541 -2.463 0.01 0.0015 0.0071 -1.1909
44 0.325 COMBO 8 Combination -2.515 -2.293 0.01 0.0015 0.0037 -0.4094
44 0.65 COMBO 8 Combination -2.491 -2.137 0.01 0.0015 0.00024 0.3184
44 0 COMBO 9 Combination -1.013 -2.698 0.018 0.0027 0.0122 -1.5748
44 0.325 COMBO 9 Combination -0.987 -2.528 0.018 0.0027 0.0063 -0.7159
44 0.65 COMBO 9 Combination -0.963 -2.372 0.018 0.0027 0.00041 0.0893
44 0 COMBO 10 Combination -2.83 -2.419 0.046 0.0068 0.0312 -1.1142
44 0.325 COMBO 10 Combination -2.803 -2.248 0.046 0.0068 0.0161 -0.3472
44 0.65 COMBO 10 Combination -2.779 -2.093 0.046 0.0068 0.001 0.3661
44 0 COMBO 11 Combination -1.231 -2.665 0.027 0.004 0.0183 -1.5194
44 0.325 COMBO 11 Combination -1.205 -2.494 0.027 0.004 0.0095 -0.6716
44 0.65 COMBO 11 Combination -1.181 -2.339 0.027 0.004 0.00061 0.1226
44 0 COMBO 12 Combination -12.234 -39.945 0.029 0.0042 0.0195 -25.255
44 0.325 COMBO 12 Combination -12.207 -39.775 0.029 0.0042 0.0101 -12.149
44 0.65 COMBO 12 Combination -12.183 -39.619 0.029 0.0042 0.00065 0.9041
44 0 COMBO 13 Combination -3.115 -13.282 0.023 0.0034 0.0158 -8.4648
44 0.325 COMBO 13 Combination -3.088 -13.111 0.023 0.0034 0.0081 -4.1258
44 0.65 COMBO 13 Combination -3.064 -12.956 0.023 0.0034 0.00053 0.1595
44 0 COMBO 14 Combination -2.539 -2.464 0.046 0.0068 0.031 -1.1878
44 0.325 COMBO 14 Combination -2.513 -2.293 0.046 0.0068 0.016 -0.4062
44 0.65 COMBO 14 Combination -2.489 -2.138 0.046 0.0068 0.001 0.3219
44 0 COMBO 15 Combination -10.791 -30.424 0.047 0.007 0.0319 -18.99
44 0.325 COMBO 15 Combination -10.765 -30.253 0.047 0.007 0.0165 -9.0141
44 0.65 COMBO 15 Combination -10.741 -30.098 0.047 0.007 0.0011 0.908
44 0 COMBO 16 Combination -3.952 -10.427 0.043 0.0063 0.0291 -6.3968
44 0.325 COMBO 16 Combination -3.925 -10.256 0.043 0.0063 0.015 -2.9968

177
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
1. Element Forces Frame K2
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
773 1.37 COMBO 74 Combination 0.329 -9.949 0.000 0.000 0.000 6.809
773 0.00 COMBO 75 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 75 Combination 0.165 -0.955 0.000 0.000 0.000 0.327
773 1.37 COMBO 75 Combination 0.329 -1.910 0.000 0.000 0.000 1.307
773 0.00 COMBO 76 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 76 Combination 0.165 -0.955 0.000 0.000 0.000 0.327
773 1.37 COMBO 76 Combination 0.329 -1.910 0.000 0.000 0.000 1.307
773 0.00 COMBO 77 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 77 Combination 0.165 -0.955 0.000 0.000 0.000 0.327
773 1.37 COMBO 77 Combination 0.329 -1.910 0.000 0.000 0.000 1.307
773 0.00 COMBO 78 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 78 Combination 0.165 -0.955 0.000 0.000 0.000 0.327
773 1.37 COMBO 78 Combination 0.329 -1.910 0.000 0.000 0.000 1.307
773 0.00 COMBO 79 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 79 Combination 0.165 -0.955 0.000 0.000 0.000 0.327
773 1.37 COMBO 79 Combination 0.329 -1.910 0.000 0.000 0.000 1.307
773 0.00 COMBO 80 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 80 Combination 0.165 -0.955 0.000 0.000 0.000 0.327
773 1.37 COMBO 80 Combination 0.329 -1.910 0.000 0.000 0.000 1.307
773 0.00 COMBO 81 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 81 Combination 0.165 -0.955 0.000 0.000 0.000 0.327
773 1.37 COMBO 81 Combination 0.329 -1.910 0.000 0.000 0.000 1.307
773 0.00 COMBO 82 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 82 Combination 0.165 -0.955 0.000 0.000 0.000 0.327
773 1.37 COMBO 82 Combination 0.329 -1.910 0.000 0.000 0.000 1.307
773 0.00 COMBO 83 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 83 Combination 0.165 -4.974 0.000 0.000 0.000 1.702
773 1.37 COMBO 83 Combination 0.329 -9.949 0.000 0.000 0.000 6.809
773 0.00 COMBO 84 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 84 Combination 0.165 -4.974 0.000 0.000 0.000 1.702
773 1.37 COMBO 84 Combination 0.329 -9.949 0.000 0.000 0.000 6.809
773 0.00 COMBO 85 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 85 Combination 0.165 -4.974 0.000 0.000 0.000 1.702
773 1.37 COMBO 85 Combination 0.329 -9.949 0.000 0.000 0.000 6.809
773 0.00 COMBO 86 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 86 Combination 0.165 -4.974 0.000 0.000 0.000 1.702
773 1.37 COMBO 86 Combination 0.329 -9.949 0.000 0.000 0.000 6.809
773 0.00 COMBO 87 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 87 Combination 0.165 -0.955 0.000 0.000 0.000 0.327
773 1.37 COMBO 87 Combination 0.329 -1.910 0.000 0.000 0.000 1.307
773 0.00 COMBO 88 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 88 Combination 0.165 -0.955 0.000 0.000 0.000 0.327
773 1.37 COMBO 88 Combination 0.329 -1.910 0.000 0.000 0.000 1.307
773 0.00 COMBO 89 Combination 0.000 0.000 0.000 0.000 0.000 0.000
773 0.68 COMBO 89 Combination 0.165 -0.955 0.000 0.000 0.000 0.327
773 1.37 COMBO 89 Combination 0.329 -1.910 0.000 0.000 0.000 1.307
773 0.00 COMBO 90 Combination 0.000 0.000 0.000 0.000 0.000 0.000

178
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
44 0.65 COMBO 16 Combination -3.901 -10.1 0.043 0.0063 0.00098 0.3496
44 0 COMBO 17 Combination -9.592 -30.609 0.033 0.0048 0.0223 -19.294
44 0.325 COMBO 17 Combination -9.565 -30.438 0.033 0.0048 0.0115 -9.2573
44 0.65 COMBO 17 Combination -9.542 -30.282 0.033 0.0048 0.00075 0.7254
44 0 COMBO 18 Combination -2.752 -10.611 0.029 0.0042 0.0194 -6.7008
44 0.325 COMBO 18 Combination -2.726 -10.44 0.029 0.0042 0.0101 -3.2401
44 0.65 COMBO 18 Combination -2.702 -10.285 0.029 0.0042 0.00065 0.167
44 0 COMBO 19 Combination -10.954 -30.399 0.054 0.008 0.0365 -18.948
44 0.325 COMBO 19 Combination -10.928 -30.228 0.054 0.008 0.0189 -8.9808
44 0.65 COMBO 19 Combination -10.904 -30.073 0.054 0.008 0.0012 0.933
44 0 COMBO 20 Combination -4.115 -10.401 0.05 0.0073 0.0337 -6.3553
44 0.325 COMBO 20 Combination -4.088 -10.231 0.05 0.0073 0.0174 -2.9636
44 0.65 COMBO 20 Combination -4.065 -10.075 0.05 0.0073 0.0011 0.3746
44 0 COMBO 21 Combination -4.28 -2.196 -0.07 -0.0104 -0.0477 -0.7555
44 0.325 COMBO 21 Combination -4.254 -2.025 -0.07 -0.0104 -0.0246 -0.062
44 0.65 COMBO 21 Combination -4.23 -1.869 -0.07 -0.0104 -0.0016 0.5779
44 0 COMBO 22 Combination -5.52 -2.005 -0.067 -0.0099 -0.0454 -0.4416
44 0.325 COMBO 22 Combination -5.494 -1.834 -0.067 -0.0099 -0.0235 0.1892
44 0.65 COMBO 22 Combination -5.47 -1.679 -0.067 -0.0099 -0.0015 0.7664
44 0 COMBO 23 Combination 11.172 -4.573 -0.01 -0.0015 -0.0069 -4.655
44 0.325 COMBO 23 Combination 11.199 -4.403 -0.01 -0.0015 -0.0036 -3.1797
44 0.65 COMBO 23 Combination 11.223 -4.247 -0.01 -0.0015 -0.0002 -1.758
44 0 COMBO 24 Combination 9.795 -4.361 -0.0065 -0.001 -0.0045 -4.3063
44 0.325 COMBO 24 Combination 9.821 -4.191 -0.0065 -0.001 -0.0023 -2.9007
44 0.65 COMBO 24 Combination 9.845 -4.035 -0.0065 -0.001 -0.0001 -1.5487
44 0 COMBO 25 Combination 5.074 -3.635 -0.015 -0.0022 -0.0101 -3.1147
44 0.325 COMBO 25 Combination 5.1 -3.464 -0.015 -0.0022 -0.0052 -1.9479
44 0.65 COMBO 25 Combination 5.124 -3.309 -0.015 -0.0022 -0.0003 -0.8348
44 0 COMBO 26 Combination -2.541 -2.463 0.01 0.0015 0.0071 -1.1909
44 0.325 COMBO 26 Combination -2.515 -2.293 0.01 0.0015 0.0037 -0.4094
44 0.65 COMBO 26 Combination -2.491 -2.137 0.01 0.0015 0.00024 0.3184
44 0 COMBO 27 Combination -0.912 -2.714 -0.011 -0.0017 -0.0077 -1.6002
44 0.325 COMBO 27 Combination -0.886 -2.543 -0.011 -0.0017 -0.004 -0.7363
44 0.65 COMBO 27 Combination -0.862 -2.388 -0.011 -0.0017 -0.0003 0.074
44 0 COMBO 28 Combination -4.74 -2.125 0.015 0.0022 0.0099 -0.6344
44 0.325 COMBO 28 Combination -4.714 -1.954 0.015 0.0022 0.0051 0.0359
44 0.65 COMBO 28 Combination -4.69 -1.799 0.015 0.0022 0.00033 0.6526
44 0 COMBO 29 Combination -4.989 -2.087 -0.02 -0.003 -0.0139 -0.5734
44 0.325 COMBO 29 Combination -4.963 -1.916 -0.02 -0.003 -0.0072 0.0843
44 0.65 COMBO 29 Combination -4.939 -1.761 -0.02 -0.003 -0.0005 0.6884
44 0 COMBO 30 Combination -5.919 -1.944 -0.018 -0.0027 -0.0122 -0.338
44 0.325 COMBO 30 Combination -5.893 -1.773 -0.018 -0.0027 -0.0063 0.2727
44 0.65 COMBO 30 Combination -5.869 -1.617 -0.018 -0.0027 -0.0004 0.8297
44 0 COMBO 31 Combination 6.601 -3.87 0.025 0.0036 0.0167 -3.498
44 0.325 COMBO 31 Combination 6.627 -3.699 0.025 0.0036 0.0086 -2.254
44 0.65 COMBO 31 Combination 6.651 -3.544 0.025 0.0036 0.00056 -1.0636
44 0 COMBO 32 Combination 5.567 -3.711 0.027 0.004 0.0185 -3.2365

179
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
44 0.325 COMBO 32 Combination 5.593 -3.54 0.027 0.004 0.0096 -2.0447
44 0.65 COMBO 32 Combination 5.617 -3.385 0.027 0.004 0.00062 -0.9066
44 0 COMBO 33 Combination 2.027 -3.166 0.021 0.0031 0.0143 -2.3428
44 0.325 COMBO 33 Combination 2.053 -2.995 0.021 0.0031 0.0074 -1.3302
44 0.65 COMBO 33 Combination 2.077 -2.84 0.021 0.0031 0.00048 -0.3712
44 0 COMBO 34 Combination -3.685 -2.287 0.04 0.0059 0.0272 -0.8999
44 0.325 COMBO 34 Combination -3.658 -2.117 0.04 0.0059 0.014 -0.1762
44 0.65 COMBO 34 Combination -3.634 -1.961 0.04 0.0059 0.00091 0.4938
44 0 COMBO 35 Combination -13.241 -30.047 -0.019 -0.0028 -0.013 -18.375
44 0.325 COMBO 35 Combination -13.215 -29.876 -0.019 -0.0028 -0.0067 -8.5236
44 0.65 COMBO 35 Combination -13.191 -29.721 -0.019 -0.0028 -0.0004 1.2745
44 0 COMBO 36 Combination -6.402 -10.049 -0.023 -0.0034 -0.0158 -5.7824
44 0.325 COMBO 36 Combination -6.375 -9.879 -0.023 -0.0034 -0.0082 -2.5064
44 0.65 COMBO 36 Combination -6.351 -9.723 -0.023 -0.0034 -0.0005 0.7161
44 0 COMBO 37 Combination -14.171 -29.904 -0.017 -0.0025 -0.0113 -18.14
44 0.325 COMBO 37 Combination -14.145 -29.733 -0.017 -0.0025 -0.0059 -8.3352
44 0.65 COMBO 37 Combination -14.121 -29.578 -0.017 -0.0025 -0.0004 1.4158
44 0 COMBO 38 Combination -7.332 -9.906 -0.021 -0.0031 -0.0141 -5.547
44 0.325 COMBO 38 Combination -7.305 -9.736 -0.021 -0.0031 -0.0073 -2.318
44 0.65 COMBO 38 Combination -7.281 -9.58 -0.021 -0.0031 -0.0005 0.8574
44 0 COMBO 39 Combination -1.652 -31.83 0.026 0.0038 0.0176 -21.3
44 0.325 COMBO 39 Combination -1.625 -31.66 0.026 0.0038 0.0091 -10.862
44 0.65 COMBO 39 Combination -1.601 -31.504 0.026 0.0038 0.00059 -0.4775
44 0 COMBO 40 Combination 5.188 -11.833 0.022 0.0032 0.0148 -8.707
44 0.325 COMBO 40 Combination 5.214 -11.662 0.022 0.0032 0.0076 -4.8446
44 0.65 COMBO 40 Combination 5.238 -11.506 0.022 0.0032 0.0005 -1.0359
44 0 COMBO 41 Combination -2.685 -31.671 0.029 0.0042 0.0194 -21.038
44 0.325 COMBO 41 Combination -2.659 -31.501 0.029 0.0042 0.01 -10.653
44 0.65 COMBO 41 Combination -2.635 -31.345 0.029 0.0042 0.00065 -0.3205
44 0 COMBO 42 Combination 4.154 -11.674 0.024 0.0036 0.0166 -8.4455
44 0.325 COMBO 42 Combination 4.181 -11.503 0.024 0.0036 0.0086 -4.6354
44 0.65 COMBO 42 Combination 4.205 -11.347 0.024 0.0036 0.00056 -0.8789
44 0 COMBO 43 Combination -6.225 -31.126 0.022 0.0033 0.0152 -20.145
44 0.325 COMBO 43 Combination -6.199 -30.956 0.022 0.0033 0.0078 -9.9381
44 0.65 COMBO 43 Combination -6.175 -30.8 0.022 0.0033 0.00051 0.2149
44 0 COMBO 44 Combination 0.614 -11.129 0.018 0.0027 0.0124 -7.5518
44 0.325 COMBO 44 Combination 0.64 -10.958 0.018 0.0027 0.0064 -3.9208
44 0.65 COMBO 44 Combination 0.664 -10.803 0.018 0.0027 0.00041 -0.3435
44 0 COMBO 45 Combination -11.937 -30.248 0.041 0.0061 0.0281 -18.702
44 0.325 COMBO 45 Combination -11.91 -30.077 0.041 0.0061 0.0145 -8.7841
44 0.65 COMBO 45 Combination -11.887 -29.921 0.041 0.0061 0.00094 1.0799
44 0 COMBO 46 Combination -5.097 -10.25 0.037 0.0055 0.0253 -6.1089
44 0.325 COMBO 46 Combination -5.071 -10.079 0.037 0.0055 0.0131 -2.7669
44 0.65 COMBO 46 Combination -5.047 -9.924 0.037 0.0055 0.00085 0.5215
44 0 COMBO 47 Combination -13.404 -30.022 -0.012 -0.0018 -0.0084 -18.334
44 0.325 COMBO 47 Combination -13.378 -29.851 -0.012 -0.0018 -0.0043 -8.4903
44 0.65 COMBO 47 Combination -13.354 -29.696 -0.012 -0.0018 -0.0003 1.2995

180
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
44 0 COMBO 48 Combination -6.565 -10.024 -0.016 -0.0024 -0.0112 -5.7409
44 0.325 COMBO 48 Combination -6.539 -9.854 -0.016 -0.0024 -0.0058 -2.4731
44 0.65 COMBO 48 Combination -6.515 -9.698 -0.016 -0.0024 -0.0004 0.7411
44 0 COMBO 49 Combination -14.334 -29.879 -0.0099 -0.0015 -0.0067 -18.098
44 0.325 COMBO 49 Combination -14.308 -29.708 -0.0099 -0.0015 -0.0035 -8.302
44 0.65 COMBO 49 Combination -14.284 -29.553 -0.0099 -0.0015 -0.0002 1.4408
44 0 COMBO 50 Combination -7.495 -9.881 -0.014 -0.0021 -0.0095 -5.5055
44 0.325 COMBO 50 Combination -7.468 -9.711 -0.014 -0.0021 -0.0049 -2.2847
44 0.65 COMBO 50 Combination -7.445 -9.555 -0.014 -0.0021 -0.0003 0.8824
44 0 COMBO 51 Combination -1.815 -31.805 0.033 0.0048 0.0222 -21.258
44 0.325 COMBO 51 Combination -1.789 -31.634 0.033 0.0048 0.0115 -10.829
44 0.65 COMBO 51 Combination -1.765 -31.479 0.033 0.0048 0.00074 -0.4525
44 0 COMBO 52 Combination 5.025 -11.807 0.028 0.0042 0.0194 -8.6655
44 0.325 COMBO 52 Combination 5.051 -11.637 0.028 0.0042 0.01 -4.8114
44 0.65 COMBO 52 Combination 5.075 -11.481 0.028 0.0042 0.00065 -1.0109
44 0 COMBO 53 Combination -2.848 -31.646 0.035 0.0052 0.024 -20.997
44 0.325 COMBO 53 Combination -2.822 -31.475 0.035 0.0052 0.0124 -10.619
44 0.65 COMBO 53 Combination -2.798 -31.32 0.035 0.0052 0.0008 -0.2955
44 0 COMBO 54 Combination 3.991 -11.648 0.031 0.0046 0.0212 -8.404
44 0.325 COMBO 54 Combination 4.017 -11.478 0.031 0.0046 0.011 -4.6021
44 0.65 COMBO 54 Combination 4.041 -11.322 0.031 0.0046 0.00071 -0.8539
44 0 COMBO 55 Combination -6.389 -31.101 0.029 0.0043 0.0198 -20.103
44 0.325 COMBO 55 Combination -6.362 -30.931 0.029 0.0043 0.0102 -9.9048
44 0.65 COMBO 55 Combination -6.339 -30.775 0.029 0.0043 0.00066 0.2399
44 0 COMBO 56 Combination 0.451 -11.104 0.025 0.0037 0.017 -7.5103
44 0.325 COMBO 56 Combination 0.477 -10.933 0.025 0.0037 0.0088 -3.8876
44 0.65 COMBO 56 Combination 0.501 -10.778 0.025 0.0037 0.00057 -0.3185
44 0 COMBO 57 Combination -12.1 -30.223 0.048 0.0071 0.0327 -18.66
44 0.325 COMBO 57 Combination -12.074 -30.052 0.048 0.0071 0.0169 -8.7509
44 0.65 COMBO 57 Combination -12.05 -29.896 0.048 0.0071 0.0011 1.1049
44 0 COMBO 58 Combination -5.261 -10.225 0.044 0.0065 0.0299 -6.0674
44 0.325 COMBO 58 Combination -5.234 -10.054 0.044 0.0065 0.0154 -2.7337
44 0.65 COMBO 58 Combination -5.21 -9.899 0.044 0.0065 0.001 0.5465
44 0 COMBO 59 Combination -3.626 -2.296 -0.041 -0.0061 -0.0281 -0.9188
44 0.325 COMBO 59 Combination -3.6 -2.126 -0.041 -0.0061 -0.0145 -0.1922
44 0.65 COMBO 59 Combination -3.576 -1.97 -0.041 -0.0061 -0.0009 0.4808
44 0 COMBO 60 Combination -4.556 -2.153 -0.039 -0.0058 -0.0265 -0.6834
44 0.325 COMBO 60 Combination -4.53 -1.983 -0.039 -0.0058 -0.0137 -0.0038
44 0.65 COMBO 60 Combination -4.506 -1.827 -0.039 -0.0058 -0.0009 0.6221
44 0 COMBO 61 Combination 7.963 -4.079 0.00362 0.00054 0.0025 -3.8434
44 0.325 COMBO 61 Combination 7.989 -3.909 0.00362 0.00054 0.0013 -2.5305
44 0.65 COMBO 61 Combination 8.013 -3.753 0.00362 0.00054 8.3E-05 -1.2712
44 0 COMBO 62 Combination 6.93 -3.92 0.00631 0.00094 0.0043 -3.5819
44 0.325 COMBO 62 Combination 6.956 -3.75 0.00631 0.00094 0.0022 -2.3213
44 0.65 COMBO 62 Combination 6.98 -3.594 0.00631 0.00094 0.00014 -1.1142
44 0 COMBO 63 Combination 3.389 -3.376 6.7E-05 1E-05 4.6E-05 -2.6882
44 0.325 COMBO 63 Combination 3.415 -3.205 6.7E-05 1E-05 2.4E-05 -1.6067

181
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
44 0.65 COMBO 63 Combination 3.439 -3.049 6.7E-05 1E-05 1.5E-06 -0.5788
44 0 COMBO 64 Combination -2.322 -2.497 0.019 0.0028 0.0129 -1.2453
44 0.325 COMBO 64 Combination -2.296 -2.326 0.019 0.0028 0.0067 -0.4528
44 0.65 COMBO 64 Combination -2.272 -2.171 0.019 0.0028 0.00043 0.2862
44 0 COMBO 65 Combination -4.826 -2.112 -0.027 -0.004 -0.0185 -0.6149
44 0.325 COMBO 65 Combination -4.799 -1.941 -0.027 -0.004 -0.0095 0.051
44 0.65 COMBO 65 Combination -4.775 -1.786 -0.027 -0.004 -0.0006 0.6634
44 0 COMBO 66 Combination -5.756 -1.969 -0.025 -0.0037 -0.0168 -0.3795
44 0.325 COMBO 66 Combination -5.729 -1.798 -0.025 -0.0037 -0.0087 0.2394
44 0.65 COMBO 66 Combination -5.705 -1.643 -0.025 -0.0037 -0.0006 0.8047
44 0 COMBO 67 Combination 6.764 -3.895 0.018 0.0026 0.0121 -3.5395
44 0.325 COMBO 67 Combination 6.79 -3.724 0.018 0.0026 0.0063 -2.2872
44 0.65 COMBO 67 Combination 6.814 -3.569 0.018 0.0026 0.00041 -1.0886
44 0 COMBO 68 Combination 5.73 -3.736 0.02 0.003 0.0139 -3.278
44 0.325 COMBO 68 Combination 5.757 -3.565 0.02 0.003 0.0072 -2.078
44 0.65 COMBO 68 Combination 5.781 -3.41 0.02 0.003 0.00047 -0.9316
44 0 COMBO 69 Combination 2.19 -3.191 0.014 0.0021 0.0097 -2.3843
44 0.325 COMBO 69 Combination 2.216 -3.021 0.014 0.0021 0.005 -1.3634
44 0.65 COMBO 69 Combination 2.24 -2.865 0.014 0.0021 0.00033 -0.3962
44 0 COMBO 70 Combination -3.521 -2.312 0.033 0.0049 0.0226 -0.9414
44 0.325 COMBO 70 Combination -3.495 -2.142 0.033 0.0049 0.0117 -0.2095
44 0.65 COMBO 70 Combination -3.471 -1.986 0.033 0.0049 0.00076 0.4688
44 0 COMBO 71 Combination -11.879 -30.257 -0.04 -0.0059 -0.0272 -18.721
44 0.325 COMBO 71 Combination -11.852 -30.086 -0.04 -0.0059 -0.0141 -8.8001
44 0.65 COMBO 71 Combination -11.828 -29.93 -0.04 -0.0059 -0.0009 1.0669
44 0 COMBO 72 Combination -5.039 -10.259 -0.044 -0.0065 -0.03 -6.1278
44 0.325 COMBO 72 Combination -5.013 -10.088 -0.044 -0.0065 -0.0155 -2.7829
44 0.65 COMBO 72 Combination -4.989 -9.933 -0.044 -0.0065 -0.001 0.5084
44 0 COMBO 73 Combination -12.809 -30.114 -0.038 -0.0056 -0.0256 -18.485
44 0.325 COMBO 73 Combination -12.782 -29.943 -0.038 -0.0056 -0.0132 -8.6117
44 0.65 COMBO 73 Combination -12.758 -29.787 -0.038 -0.0056 -0.0009 1.2082
44 0 COMBO 74 Combination -5.969 -10.116 -0.042 -0.0062 -0.0284 -5.8924
44 0.325 COMBO 74 Combination -5.943 -9.945 -0.042 -0.0062 -0.0147 -2.5945
44 0.65 COMBO 74 Combination -5.919 -9.79 -0.042 -0.0062 -0.001 0.6498
44 0 COMBO 75 Combination -0.289 -32.04 0.00492 0.00073 0.0033 -21.645
44 0.325 COMBO 75 Combination -0.263 -31.869 0.00492 0.00073 0.0017 -11.138
44 0.65 COMBO 75 Combination -0.239 -31.713 0.00492 0.00073 0.00011 -0.6851
44 0 COMBO 76 Combination 6.55 -12.042 0.0008 0.00012 0.00055 -9.0524
44 0.325 COMBO 76 Combination 6.576 -11.871 0.0008 0.00012 0.00028 -5.1212
44 0.65 COMBO 76 Combination 6.6 -11.716 0.0008 0.00012 1.8E-05 -1.2435
44 0 COMBO 77 Combination -1.323 -31.881 0.00761 0.0011 0.0052 -21.384
44 0.325 COMBO 77 Combination -1.296 -31.71 0.00761 0.0011 0.0027 -10.929
44 0.65 COMBO 77 Combination -1.272 -31.555 0.00761 0.0011 0.00017 -0.5281
44 0 COMBO 78 Combination 5.517 -11.883 0.00349 0.00052 0.0024 -8.7909
44 0.325 COMBO 78 Combination 5.543 -11.713 0.00349 0.00052 0.0012 -4.9119
44 0.65 COMBO 78 Combination 5.567 -11.557 0.00349 0.00052 8E-05 -1.0866
44 0 COMBO 79 Combination -4.863 -31.336 0.00136 0.0002 0.00093 -20.49

182
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
44 0.325 COMBO 79 Combination -4.837 -31.165 0.00136 0.0002 0.00048 -10.215
44 0.65 COMBO 79 Combination -4.813 -31.01 0.00136 0.0002 3.1E-05 0.0073
44 0 COMBO 80 Combination 1.976 -11.338 -0.0028 -0.0004 -0.0019 -7.8972
44 0.325 COMBO 80 Combination 2.002 -11.168 -0.0028 -0.0004 -0.001 -4.1974
44 0.65 COMBO 80 Combination 2.026 -11.012 -0.0028 -0.0004 -6E-05 -0.5511
44 0 COMBO 81 Combination -10.574 -30.457 0.02 0.003 0.0138 -19.047
44 0.325 COMBO 81 Combination -10.548 -30.287 0.02 0.003 0.0071 -9.0607
44 0.65 COMBO 81 Combination -10.524 -30.131 0.02 0.003 0.00046 0.8723
44 0 COMBO 82 Combination -3.735 -10.46 0.016 0.0024 0.011 -6.4543
44 0.325 COMBO 82 Combination -3.709 -10.289 0.016 0.0024 0.0057 -3.0434
44 0.65 COMBO 82 Combination -3.685 -10.133 0.016 0.0024 0.00037 0.3138
44 0 COMBO 83 Combination -12.042 -30.232 -0.033 -0.0049 -0.0226 -18.679
44 0.325 COMBO 83 Combination -12.015 -30.061 -0.033 -0.0049 -0.0117 -8.7669
44 0.65 COMBO 83 Combination -11.992 -29.905 -0.033 -0.0049 -0.0008 1.0919
44 0 COMBO 84 Combination -5.202 -10.234 -0.037 -0.0055 -0.0254 -6.0863
44 0.325 COMBO 84 Combination -5.176 -10.063 -0.037 -0.0055 -0.0131 -2.7496
44 0.65 COMBO 84 Combination -5.152 -9.908 -0.037 -0.0055 -0.0009 0.5334
44 0 COMBO 85 Combination -12.972 -30.088 -0.031 -0.0046 -0.021 -18.444
44 0.325 COMBO 85 Combination -12.945 -29.918 -0.031 -0.0046 -0.0108 -8.5785
44 0.65 COMBO 85 Combination -12.922 -29.762 -0.031 -0.0046 -0.0007 1.2332
44 0 COMBO 86 Combination -6.132 -10.091 -0.035 -0.0052 -0.0238 -5.8509
44 0.325 COMBO 86 Combination -6.106 -9.92 -0.035 -0.0052 -0.0123 -2.5613
44 0.65 COMBO 86 Combination -6.082 -9.765 -0.035 -0.0052 -0.0008 0.6748
44 0 COMBO 87 Combination -0.452 -32.015 0.012 0.0017 0.0079 -21.604
44 0.325 COMBO 87 Combination -0.426 -31.844 0.012 0.0017 0.0041 -11.105
44 0.65 COMBO 87 Combination -0.402 -31.688 0.012 0.0017 0.00027 -0.6601
44 0 COMBO 88 Combination 6.387 -12.017 0.00754 0.0011 0.0051 -9.0109
44 0.325 COMBO 88 Combination 6.413 -11.846 0.00754 0.0011 0.0027 -5.0879
44 0.65 COMBO 88 Combination 6.437 -11.691 0.00754 0.0011 0.00017 -1.2185
44 0 COMBO 89 Combination -1.486 -31.856 0.014 0.0021 0.0098 -21.342
44 0.325 COMBO 89 Combination -1.46 -31.685 0.014 0.0021 0.005 -10.896
44 0.65 COMBO 89 Combination -1.436 -31.529 0.014 0.0021 0.00033 -0.5031
44 0 COMBO 90 Combination 5.354 -11.858 0.01 0.0015 0.007 -8.7494
44 0.325 COMBO 90 Combination 5.38 -11.687 0.01 0.0015 0.0036 -4.8787
44 0.65 COMBO 90 Combination 5.404 -11.532 0.01 0.0015 0.00023 -1.0616
44 0 COMBO 91 Combination -5.026 -31.311 0.0081 0.0012 0.0055 -20.449
44 0.325 COMBO 91 Combination -5 -31.14 0.0081 0.0012 0.0028 -10.181
44 0.65 COMBO 91 Combination -4.976 -30.985 0.0081 0.0012 0.00018 0.0323
44 0 COMBO 92 Combination 1.813 -11.313 0.00398 0.00059 0.0027 -7.8557
44 0.325 COMBO 92 Combination 1.839 -11.143 0.00398 0.00059 0.0014 -4.1641
44 0.65 COMBO 92 Combination 1.863 -10.987 0.00398 0.00059 9.1E-05 -0.5261
44 0 COMBO 93 Combination -10.738 -30.432 0.027 0.004 0.0184 -19.006
44 0.325 COMBO 93 Combination -10.711 -30.261 0.027 0.004 0.0095 -9.0274
44 0.65 COMBO 93 Combination -10.687 -30.106 0.027 0.004 0.00062 0.8973
44 0 COMBO 94 Combination -3.898 -10.435 0.023 0.0034 0.0156 -6.4128
44 0.325 COMBO 94 Combination -3.872 -10.264 0.023 0.0034 0.0081 -3.0102
44 0.65 COMBO 94 Combination -3.848 -10.108 0.023 0.0034 0.00052 0.3388

183
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
44 0 COMBO 95 Combination -9.353 -30.645 0.00405 0.0006 0.0028 -19.354
44 0.325 COMBO 95 Combination -9.326 -30.475 0.00405 0.0006 0.0014 -9.3058
44 0.65 COMBO 95 Combination -9.302 -30.319 0.00405 0.0006 9.2E-05 0.689
44 0 COMBO 96 Combination -2.513 -10.648 -7E-05 -1E-05 -4E-05 -6.7614
44 0.325 COMBO 96 Combination -2.487 -10.477 -7E-05 -1E-05 -2E-05 -3.2886
44 0.65 COMBO 96 Combination -2.463 -10.322 -7E-05 -1E-05 -1E-06 0.1305
44 0 COMBO 97 Combination -12.224 -30.204 0.023 0.0035 0.0159 -18.63
44 0.325 COMBO 97 Combination -12.197 -30.033 0.023 0.0035 0.0082 -8.7267
44 0.65 COMBO 97 Combination -12.173 -29.877 0.023 0.0035 0.00053 1.1229
44 0 COMBO 98 Combination -5.384 -10.206 0.019 0.0029 0.0131 -6.037
44 0.325 COMBO 98 Combination -5.358 -10.035 0.019 0.0029 0.0068 -2.7095
44 0.65 COMBO 98 Combination -5.334 -9.88 0.019 0.0029 0.00044 0.5644
44 0 COMBO 99 Combination -1.101 -2.685 0.00276 0.00041 0.0019 -1.5524
44 0.325 COMBO 99 Combination -1.074 -2.514 0.00276 0.00041 0.00097 -0.6979
44 0.65 COMBO 99 Combination -1.05 -2.359 0.00276 0.00041 6.3E-05 0.1028
44 0 COMBO 100 Combination -3.971 -2.243 0.022 0.0033 0.015 -0.828
44 0.325 COMBO 100 Combination -3.945 -2.073 0.022 0.0033 0.0078 -0.1188
44 0.65 COMBO 100 Combination -3.921 -1.917 0.022 0.0033 0.0005 0.5367
44 0 COMBO 101 Combination -9.516 -30.62 0.011 0.0016 0.0073 -19.313
44 0.325 COMBO 101 Combination -9.49 -30.45 0.011 0.0016 0.0038 -9.2726
44 0.65 COMBO 101 Combination -9.466 -30.294 0.011 0.0016 0.00025 0.714
44 0 COMBO 102 Combination -2.677 -10.623 0.00667 0.00099 0.0045 -6.7199
44 0.325 COMBO 102 Combination -2.65 -10.452 0.00667 0.00099 0.0023 -3.2553
44 0.65 COMBO 102 Combination -2.626 -10.296 0.00667 0.00099 0.00015 0.1555
44 0 COMBO 103 Combination -12.387 -30.179 0.03 0.0045 0.0205 -18.588
44 0.325 COMBO 103 Combination -12.361 -30.008 0.03 0.0045 0.0106 -8.6934
44 0.65 COMBO 103 Combination -12.337 -29.852 0.03 0.0045 0.00069 1.1479
44 0 COMBO 104 Combination -5.547 -10.181 0.026 0.0039 0.0177 -5.9955
44 0.325 COMBO 104 Combination -5.521 -10.01 0.026 0.0039 0.0092 -2.6762
44 0.65 COMBO 104 Combination -5.497 -9.855 0.026 0.0039 0.00059 0.5894
44 0 COMBO 105 Combination -3.875 -1.116 -0.077 -0.0114 -0.0525 -0.1256
44 0.325 COMBO 105 Combination -3.859 -1.014 -0.077 -0.0114 -0.0272 0.2244
44 0.65 COMBO 105 Combination -3.845 -0.921 -0.077 -0.0114 -0.0018 0.5422
44 0 COMBO 106 Combination -5.115 -0.926 -0.074 -0.011 -0.0503 0.1883
44 0.325 COMBO 106 Combination -5.099 -0.823 -0.074 -0.011 -0.026 0.4756
44 0.65 COMBO 106 Combination -5.084 -0.73 -0.074 -0.011 -0.0017 0.7307
44 0 COMBO 107 Combination 11.578 -3.494 -0.017 -0.0026 -0.0118 -4.0251
44 0.325 COMBO 107 Combination 11.594 -3.391 -0.017 -0.0026 -0.0061 -2.8933
44 0.65 COMBO 107 Combination 11.608 -3.298 -0.017 -0.0026 -0.0004 -1.7937
44 0 COMBO 108 Combination 10.2 -3.282 -0.014 -0.002 -0.0093 -3.6764
44 0.325 COMBO 108 Combination 10.216 -3.179 -0.014 -0.002 -0.0048 -2.6143
44 0.65 COMBO 108 Combination 10.23 -3.086 -0.014 -0.002 -0.0003 -1.5844
44 0 COMBO 109 Combination 5.479 -2.555 -0.022 -0.0033 -0.015 -2.4848
44 0.325 COMBO 109 Combination 5.495 -2.453 -0.022 -0.0033 -0.0078 -1.6616
44 0.65 COMBO 109 Combination 5.509 -2.36 -0.022 -0.0033 -0.0005 -0.8705
44 0 COMBO 110 Combination -2.136 -1.384 0.00324 0.00048 0.0022 -0.561
44 0.325 COMBO 110 Combination -2.12 -1.281 0.00324 0.00048 0.0011 -0.123

184
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
44 0.65 COMBO 110 Combination -2.106 -1.188 0.00324 0.00048 7.4E-05 0.2827
44 0 COMBO 111 Combination -0.507 -1.635 -0.018 -0.0027 -0.0126 -0.9703
44 0.325 COMBO 111 Combination -0.491 -1.532 -0.018 -0.0027 -0.0065 -0.4499
44 0.65 COMBO 111 Combination -0.477 -1.439 -0.018 -0.0027 -0.0004 0.0383
44 0 COMBO 112 Combination -4.335 -1.046 0.00734 0.0011 0.005 -0.0045
44 0.325 COMBO 112 Combination -4.319 -0.943 0.00734 0.0011 0.0026 0.3223
44 0.65 COMBO 112 Combination -4.305 -0.85 0.00734 0.0011 0.00017 0.6169
45 0 COMBO 1 Combination -1.286 -2.656 -0.004 -0.0006 -0.0027 -1.5061
45 0.325 COMBO 1 Combination -1.259 -2.486 -0.004 -0.0006 -0.0014 -0.661
45 0.65 COMBO 1 Combination -1.235 -2.33 -0.004 -0.0006 -9E-05 0.1304
45 0 COMBO 2 Combination -2.852 -2.415 -0.014 -0.002 -0.0092 -1.1086
45 0.325 COMBO 2 Combination -2.826 -2.245 -0.014 -0.002 -0.0048 -0.3428
45 0.65 COMBO 2 Combination -2.802 -2.089 -0.014 -0.002 -0.0003 0.3694
45 0 COMBO 3 Combination 10.534 -4.475 -0.018 -0.0026 -0.012 -4.4939
45 0.325 COMBO 3 Combination 10.56 -4.304 -0.018 -0.0026 -0.0062 -3.0509
45 0.65 COMBO 3 Combination 10.584 -4.149 -0.018 -0.0026 -0.0004 -1.6615
45 0 COMBO 4 Combination 9.51 -4.317 -0.023 -0.0034 -0.0158 -4.2345
45 0.325 COMBO 4 Combination 9.536 -4.147 -0.023 -0.0034 -0.0081 -2.8433
45 0.65 COMBO 4 Combination 9.56 -3.991 -0.023 -0.0034 -0.0005 -1.5057
45 0 COMBO 5 Combination -6.22 -1.897 0.054 0.0079 0.0365 -0.2651
45 0.325 COMBO 5 Combination -6.194 -1.727 0.054 0.0079 0.0189 0.3303
45 0.65 COMBO 5 Combination -6.17 -1.571 0.054 0.0079 0.0012 0.872
45 0 COMBO 6 Combination -7.12 -1.759 0.048 0.0071 0.0325 -0.037
45 0.325 COMBO 6 Combination -7.094 -1.588 0.048 0.0071 0.0168 0.5128
45 0.65 COMBO 6 Combination -7.07 -1.433 0.048 0.0071 0.0011 1.009
45 0 COMBO 7 Combination -1.562 -2.614 0.013 0.002 0.0091 -1.4385
45 0.325 COMBO 7 Combination -1.536 -2.443 0.013 0.002 0.0047 -0.6074
45 0.65 COMBO 7 Combination -1.512 -2.288 0.013 0.002 0.0003 0.17
45 0 COMBO 8 Combination 5.158 -3.648 0.00245 0.00036 0.0017 -3.1351
45 0.325 COMBO 8 Combination 5.185 -3.477 0.00245 0.00036 0.00086 -1.9641
45 0.65 COMBO 8 Combination 5.209 -3.322 0.00245 0.00036 5.6E-05 -0.8467
45 0 COMBO 9 Combination -1.286 -2.656 -0.004 -0.0006 -0.0027 -1.5061
45 0.325 COMBO 9 Combination -1.259 -2.486 -0.004 -0.0006 -0.0014 -0.661
45 0.65 COMBO 9 Combination -1.235 -2.33 -0.004 -0.0006 -9E-05 0.1304
45 0 COMBO 10 Combination -2.852 -2.415 -0.014 -0.002 -0.0092 -1.1086
45 0.325 COMBO 10 Combination -2.826 -2.245 -0.014 -0.002 -0.0048 -0.3428
45 0.65 COMBO 10 Combination -2.802 -2.089 -0.014 -0.002 -0.0003 0.3694
45 0 COMBO 11 Combination -1.393 -2.64 -0.0045 -0.0007 -0.003 -1.4788
45 0.325 COMBO 11 Combination -1.367 -2.469 -0.0045 -0.0007 -0.0016 -0.6392
45 0.65 COMBO 11 Combination -1.343 -2.314 -0.0045 -0.0007 -0.0001 0.1468
45 0 COMBO 12 Combination -3.65 -13.2 -0.0028 -0.0004 -0.0019 -8.3296
45 0.325 COMBO 12 Combination -3.624 -13.029 -0.0028 -0.0004 -0.001 -4.0177
45 0.65 COMBO 12 Combination -3.6 -12.873 -0.0028 -0.0004 -6E-05 0.2405
45 0 COMBO 13 Combination -12.624 -39.885 -0.011 -0.0016 -0.0071 -25.157
45 0.325 COMBO 13 Combination -12.597 -39.715 -0.011 -0.0016 -0.0037 -12.07
45 0.65 COMBO 13 Combination -12.574 -39.559 -0.011 -0.0016 -0.0002 0.963
45 0 COMBO 14 Combination -2.541 -2.463 -0.012 -0.0017 -0.0079 -1.1876

185
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
45 0.325 COMBO 14 Combination -2.515 -2.293 -0.012 -0.0017 -0.0041 -0.406
45 0.65 COMBO 14 Combination -2.491 -2.137 -0.012 -0.0017 -0.0003 0.3219
45 0 COMBO 15 Combination -4.234 -10.383 -0.01 -0.0015 -0.007 -6.3256
45 0.325 COMBO 15 Combination -4.208 -10.212 -0.01 -0.0015 -0.0036 -2.9399
45 0.65 COMBO 15 Combination -4.184 -10.057 -0.01 -0.0015 -0.0002 0.3922
45 0 COMBO 16 Combination -10.964 -30.397 -0.016 -0.0024 -0.0109 -18.946
45 0.325 COMBO 16 Combination -10.938 -30.227 -0.016 -0.0024 -0.0057 -8.9792
45 0.65 COMBO 16 Combination -10.914 -30.071 -0.016 -0.0024 -0.0004 0.9341
45 0 COMBO 17 Combination -3.14 -10.551 -0.0034 -0.0005 -0.0023 -6.6033
45 0.325 COMBO 17 Combination -3.113 -10.381 -0.0034 -0.0005 -0.0012 -3.1622
45 0.65 COMBO 17 Combination -3.089 -10.225 -0.0034 -0.0005 -8E-05 0.2252
45 0 COMBO 18 Combination -9.87 -30.566 -0.0092 -0.0014 -0.0063 -19.224
45 0.325 COMBO 18 Combination -9.843 -30.395 -0.0092 -0.0014 -0.0033 -9.2015
45 0.65 COMBO 18 Combination -9.82 -30.24 -0.0092 -0.0014 -0.0002 0.7671
45 0 COMBO 19 Combination -4.314 -10.371 -0.011 -0.0016 -0.0072 -6.3052
45 0.325 COMBO 19 Combination -4.288 -10.2 -0.011 -0.0016 -0.0037 -2.9236
45 0.65 COMBO 19 Combination -4.264 -10.044 -0.011 -0.0016 -0.0002 0.4045
45 0 COMBO 20 Combination -11.045 -30.385 -0.016 -0.0024 -0.0112 -18.926
45 0.325 COMBO 20 Combination -11.018 -30.214 -0.016 -0.0024 -0.0058 -8.9629
45 0.65 COMBO 20 Combination -10.994 -30.059 -0.016 -0.0024 -0.0004 0.9464
45 0 COMBO 21 Combination 10.534 -4.475 -0.018 -0.0026 -0.012 -4.4939
45 0.325 COMBO 21 Combination 10.56 -4.304 -0.018 -0.0026 -0.0062 -3.0509
45 0.65 COMBO 21 Combination 10.584 -4.149 -0.018 -0.0026 -0.0004 -1.6615
45 0 COMBO 22 Combination 9.51 -4.317 -0.023 -0.0034 -0.0158 -4.2345
45 0.325 COMBO 22 Combination 9.536 -4.147 -0.023 -0.0034 -0.0081 -2.8433
45 0.65 COMBO 22 Combination 9.56 -3.991 -0.023 -0.0034 -0.0005 -1.5057
45 0 COMBO 23 Combination -6.22 -1.897 0.054 0.0079 0.0365 -0.2651
45 0.325 COMBO 23 Combination -6.194 -1.727 0.054 0.0079 0.0189 0.3303
45 0.65 COMBO 23 Combination -6.17 -1.571 0.054 0.0079 0.0012 0.872
45 0 COMBO 24 Combination -7.12 -1.759 0.048 0.0071 0.0325 -0.037
45 0.325 COMBO 24 Combination -7.094 -1.588 0.048 0.0071 0.0168 0.5128
45 0.65 COMBO 24 Combination -7.07 -1.433 0.048 0.0071 0.0011 1.009
45 0 COMBO 25 Combination -1.562 -2.614 0.013 0.002 0.0091 -1.4385
45 0.325 COMBO 25 Combination -1.536 -2.443 0.013 0.002 0.0047 -0.6074
45 0.65 COMBO 25 Combination -1.512 -2.288 0.013 0.002 0.0003 0.17
45 0 COMBO 26 Combination 5.158 -3.648 0.00245 0.00036 0.0017 -3.1351
45 0.325 COMBO 26 Combination 5.185 -3.477 0.00245 0.00036 0.00086 -1.9641
45 0.65 COMBO 26 Combination 5.209 -3.322 0.00245 0.00036 5.6E-05 -0.8467
45 0 COMBO 27 Combination -1.545 -2.617 -0.0031 -0.0005 -0.0021 -1.441
45 0.325 COMBO 27 Combination -1.519 -2.446 -0.0031 -0.0005 -0.0011 -0.6091
45 0.65 COMBO 27 Combination -1.495 -2.29 -0.0031 -0.0005 -7E-05 0.1692
45 0 COMBO 28 Combination 3.936 -3.46 -0.019 -0.0029 -0.0131 -2.8243
45 0.325 COMBO 28 Combination 3.962 -3.289 -0.019 -0.0029 -0.0068 -1.7151
45 0.65 COMBO 28 Combination 3.986 -3.134 -0.019 -0.0029 -0.0004 -0.6595
45 0 COMBO 29 Combination 6.324 -3.827 -0.022 -0.0032 -0.0148 -3.4284
45 0.325 COMBO 29 Combination 6.35 -3.657 -0.022 -0.0032 -0.0077 -2.1984
45 0.65 COMBO 29 Combination 6.374 -3.501 -0.022 -0.0032 -0.0005 -1.022

186
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
45 0 COMBO 30 Combination 5.556 -3.709 -0.026 -0.0038 -0.0177 -3.2339
45 0.325 COMBO 30 Combination 5.582 -3.538 -0.026 -0.0038 -0.0091 -2.0427
45 0.65 COMBO 30 Combination 5.606 -3.383 -0.026 -0.0038 -0.0006 -0.9052
45 0 COMBO 31 Combination -6.242 -1.894 0.032 0.0047 0.0215 -0.2568
45 0.325 COMBO 31 Combination -6.216 -1.723 0.032 0.0047 0.0111 0.3375
45 0.65 COMBO 31 Combination -6.192 -1.568 0.032 0.0047 0.00072 0.8781
45 0 COMBO 32 Combination -6.917 -1.79 0.027 0.004 0.0185 -0.0858
45 0.325 COMBO 32 Combination -6.891 -1.619 0.027 0.004 0.0096 0.4743
45 0.65 COMBO 32 Combination -6.867 -1.464 0.027 0.004 0.00062 0.9809
45 0 COMBO 33 Combination -2.749 -2.431 0.00141 0.00021 0.00096 -1.1369
45 0.325 COMBO 33 Combination -2.722 -2.261 0.00141 0.00021 0.0005 -0.3658
45 0.65 COMBO 33 Combination -2.698 -2.105 0.00141 0.00021 3.2E-05 0.3516
45 0 COMBO 34 Combination 2.292 -3.207 -0.0067 -0.001 -0.0046 -2.4093
45 0.325 COMBO 34 Combination 2.318 -3.036 -0.0067 -0.001 -0.0024 -1.3833
45 0.65 COMBO 34 Combination 2.342 -2.881 -0.0067 -0.001 -0.0002 -0.4109
45 0 COMBO 35 Combination 4.631 -11.747 -0.021 -0.003 -0.014 -8.5665
45 0.325 COMBO 35 Combination 4.657 -11.576 -0.021 -0.003 -0.0072 -4.7323
45 0.65 COMBO 35 Combination 4.681 -11.421 -0.021 -0.003 -0.0005 -0.9518
45 0 COMBO 36 Combination -2.099 -31.761 -0.026 -0.0039 -0.0179 -21.187
45 0.325 COMBO 36 Combination -2.073 -31.591 -0.026 -0.0039 -0.0093 -10.772
45 0.65 COMBO 36 Combination -2.049 -31.435 -0.026 -0.0039 -0.0006 -0.4099
45 0 COMBO 37 Combination 3.863 -11.629 -0.025 -0.0037 -0.0168 -8.3719
45 0.325 COMBO 37 Combination 3.889 -11.458 -0.025 -0.0037 -0.0087 -4.5766
45 0.65 COMBO 37 Combination 3.913 -11.303 -0.025 -0.0037 -0.0006 -0.8349
45 0 COMBO 38 Combination -2.867 -31.643 -0.03 -0.0045 -0.0207 -20.993
45 0.325 COMBO 38 Combination -2.841 -31.472 -0.03 -0.0045 -0.0107 -10.616
45 0.65 COMBO 38 Combination -2.817 -31.317 -0.03 -0.0045 -0.0007 -0.293
45 0 COMBO 39 Combination -7.935 -9.814 0.033 0.0049 0.0224 -5.3949
45 0.325 COMBO 39 Combination -7.909 -9.643 0.033 0.0049 0.0116 -2.1964
45 0.65 COMBO 39 Combination -7.885 -9.487 0.033 0.0049 0.00075 0.9484
45 0 COMBO 40 Combination -14.665 -29.828 0.027 0.004 0.0184 -18.015
45 0.325 COMBO 40 Combination -14.639 -29.657 0.027 0.004 0.0095 -8.2357
45 0.65 COMBO 40 Combination -14.615 -29.502 0.027 0.004 0.00062 1.4903
45 0 COMBO 41 Combination -8.61 -9.71 0.029 0.0042 0.0194 -5.2239
45 0.325 COMBO 41 Combination -8.584 -9.539 0.029 0.0042 0.01 -2.0595
45 0.65 COMBO 41 Combination -8.56 -9.384 0.029 0.0042 0.00065 1.0511
45 0 COMBO 42 Combination -15.34 -29.724 0.023 0.0034 0.0154 -17.844
45 0.325 COMBO 42 Combination -15.314 -29.553 0.023 0.0034 0.008 -8.0989
45 0.65 COMBO 42 Combination -15.29 -29.398 0.023 0.0034 0.00052 1.593
45 0 COMBO 43 Combination -4.441 -10.351 0.00269 0.0004 0.0018 -6.2749
45 0.325 COMBO 43 Combination -4.415 -10.18 0.00269 0.0004 0.00094 -2.8997
45 0.65 COMBO 43 Combination -4.391 -10.025 0.00269 0.0004 6.1E-05 0.4219
45 0 COMBO 44 Combination -11.172 -30.365 -0.0031 -0.0005 -0.0021 -18.896
45 0.325 COMBO 44 Combination -11.145 -30.195 -0.0031 -0.0005 -0.0011 -8.939
45 0.65 COMBO 44 Combination -11.121 -30.039 -0.0031 -0.0005 -7E-05 0.9638
45 0 COMBO 45 Combination 0.599 -11.127 -0.0055 -0.0008 -0.0037 -7.5474
45 0.325 COMBO 45 Combination 0.625 -10.956 -0.0055 -0.0008 -0.0019 -3.9172

187
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
45 0.65 COMBO 45 Combination 0.649 -10.8 -0.0055 -0.0008 -0.0001 -0.3406
45 0 COMBO 46 Combination -6.131 -31.141 -0.011 -0.0017 -0.0077 -20.168
45 0.325 COMBO 46 Combination -6.105 -30.97 -0.011 -0.0017 -0.004 -9.9565
45 0.65 COMBO 46 Combination -6.081 -30.815 -0.011 -0.0017 -0.0003 0.2013
45 0 COMBO 47 Combination 4.55 -11.734 -0.021 -0.0031 -0.0142 -8.5461
45 0.325 COMBO 47 Combination 4.577 -11.564 -0.021 -0.0031 -0.0073 -4.716
45 0.65 COMBO 47 Combination 4.601 -11.408 -0.021 -0.0031 -0.0005 -0.9395
45 0 COMBO 48 Combination -2.18 -31.749 -0.027 -0.004 -0.0182 -21.167
45 0.325 COMBO 48 Combination -2.154 -31.578 -0.027 -0.004 -0.0094 -10.755
45 0.65 COMBO 48 Combination -2.13 -31.423 -0.027 -0.004 -0.0006 -0.3976
45 0 COMBO 49 Combination 3.782 -11.616 -0.025 -0.0037 -0.017 -8.3515
45 0.325 COMBO 49 Combination 3.809 -11.446 -0.025 -0.0037 -0.0088 -4.5603
45 0.65 COMBO 49 Combination 3.833 -11.29 -0.025 -0.0037 -0.0006 -0.8226
45 0 COMBO 50 Combination -2.948 -31.631 -0.031 -0.0046 -0.021 -20.972
45 0.325 COMBO 50 Combination -2.922 -31.46 -0.031 -0.0046 -0.0108 -10.6
45 0.65 COMBO 50 Combination -2.898 -31.305 -0.031 -0.0046 -0.0007 -0.2807
45 0 COMBO 51 Combination -8.016 -9.801 0.033 0.0048 0.0221 -5.3745
45 0.325 COMBO 51 Combination -7.989 -9.631 0.033 0.0048 0.0114 -2.1801
45 0.65 COMBO 51 Combination -7.965 -9.475 0.033 0.0048 0.00074 0.9607
45 0 COMBO 52 Combination -14.746 -29.816 0.027 0.004 0.0182 -17.995
45 0.325 COMBO 52 Combination -14.719 -29.645 0.027 0.004 0.0094 -8.2194
45 0.65 COMBO 52 Combination -14.695 -29.489 0.027 0.004 0.00061 1.5026
45 0 COMBO 53 Combination -8.69 -9.697 0.028 0.0042 0.0191 -5.2035
45 0.325 COMBO 53 Combination -8.664 -9.527 0.028 0.0042 0.0099 -2.0432
45 0.65 COMBO 53 Combination -8.64 -9.371 0.028 0.0042 0.00064 1.0634
45 0 COMBO 54 Combination -15.42 -29.712 0.022 0.0033 0.0152 -17.824
45 0.325 COMBO 54 Combination -15.394 -29.541 0.022 0.0033 0.0079 -8.0825
45 0.65 COMBO 54 Combination -15.37 -29.386 0.022 0.0033 0.00051 1.6053
45 0 COMBO 55 Combination -4.522 -10.339 0.00231 0.00034 0.0016 -6.2545
45 0.325 COMBO 55 Combination -4.496 -10.168 0.00231 0.00034 0.00081 -2.8834
45 0.65 COMBO 55 Combination -4.472 -10.013 0.00231 0.00034 5.3E-05 0.4341
45 0 COMBO 56 Combination -11.252 -30.353 -0.0035 -0.0005 -0.0024 -18.875
45 0.325 COMBO 56 Combination -11.226 -30.182 -0.0035 -0.0005 -0.0012 -8.9227
45 0.65 COMBO 56 Combination -11.202 -30.027 -0.0035 -0.0005 -8E-05 0.976
45 0 COMBO 57 Combination 0.519 -11.114 -0.0058 -0.0009 -0.004 -7.527
45 0.325 COMBO 57 Combination 0.545 -10.944 -0.0058 -0.0009 -0.0021 -3.9009
45 0.65 COMBO 57 Combination 0.569 -10.788 -0.0058 -0.0009 -0.0001 -0.3283
45 0 COMBO 58 Combination -6.212 -31.129 -0.012 -0.0017 -0.0079 -20.148
45 0.325 COMBO 58 Combination -6.185 -30.958 -0.012 -0.0017 -0.0041 -9.9402
45 0.65 COMBO 58 Combination -6.161 -30.802 -0.012 -0.0017 -0.0003 0.2135
45 0 COMBO 59 Combination 7.499 -4.008 -0.015 -0.0022 -0.0099 -3.7265
45 0.325 COMBO 59 Combination 7.525 -3.837 -0.015 -0.0022 -0.0051 -2.4371
45 0.65 COMBO 59 Combination 7.549 -3.682 -0.015 -0.0022 -0.0003 -1.2013
45 0 COMBO 60 Combination 6.731 -3.89 -0.019 -0.0028 -0.0127 -3.532
45 0.325 COMBO 60 Combination 6.757 -3.719 -0.019 -0.0028 -0.0066 -2.2814
45 0.65 COMBO 60 Combination 6.781 -3.564 -0.019 -0.0028 -0.0004 -1.0844
45 0 COMBO 61 Combination -5.067 -2.075 0.039 0.0058 0.0264 -0.5549

188
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
45 0.325 COMBO 61 Combination -5.041 -1.904 0.039 0.0058 0.0137 0.0988
45 0.65 COMBO 61 Combination -5.017 -1.748 0.039 0.0058 0.00089 0.6989
45 0 COMBO 62 Combination -5.742 -1.971 0.034 0.0051 0.0234 -0.3839
45 0.325 COMBO 62 Combination -5.716 -1.8 0.034 0.0051 0.0121 0.2357
45 0.65 COMBO 62 Combination -5.692 -1.645 0.034 0.0051 0.00079 0.8016
45 0 COMBO 63 Combination -1.574 -2.612 0.00862 0.0013 0.0059 -1.4349
45 0.325 COMBO 63 Combination -1.547 -2.442 0.00862 0.0013 0.003 -0.6045
45 0.65 COMBO 63 Combination -1.524 -2.286 0.00862 0.0013 0.0002 0.1724
45 0 COMBO 64 Combination 3.467 -3.388 0.00047 7E-05 0.00032 -2.7074
45 0.325 COMBO 64 Combination 3.493 -3.217 0.00047 7E-05 0.00017 -1.622
45 0.65 COMBO 64 Combination 3.517 -3.061 0.00047 7E-05 1.1E-05 -0.5901
45 0 COMBO 65 Combination 6.404 -3.84 -0.021 -0.0032 -0.0146 -3.4489
45 0.325 COMBO 65 Combination 6.431 -3.669 -0.021 -0.0032 -0.0075 -2.2148
45 0.65 COMBO 65 Combination 6.454 -3.513 -0.021 -0.0032 -0.0005 -1.0343
45 0 COMBO 66 Combination 5.636 -3.721 -0.026 -0.0038 -0.0174 -3.2543
45 0.325 COMBO 66 Combination 5.662 -3.551 -0.026 -0.0038 -0.009 -2.0591
45 0.65 COMBO 66 Combination 5.686 -3.395 -0.026 -0.0038 -0.0006 -0.9175
45 0 COMBO 67 Combination -6.162 -1.906 0.032 0.0047 0.0218 -0.2772
45 0.325 COMBO 67 Combination -6.135 -1.736 0.032 0.0047 0.0113 0.3211
45 0.65 COMBO 67 Combination -6.111 -1.58 0.032 0.0047 0.00073 0.8658
45 0 COMBO 68 Combination -6.836 -1.802 0.028 0.0041 0.0188 -0.1062
45 0.325 COMBO 68 Combination -6.81 -1.632 0.028 0.0041 0.0097 0.458
45 0.65 COMBO 68 Combination -6.786 -1.476 0.028 0.0041 0.00063 0.9686
45 0 COMBO 69 Combination -2.668 -2.444 0.00178 0.00026 0.0012 -1.1573
45 0.325 COMBO 69 Combination -2.642 -2.273 0.00178 0.00026 0.00063 -0.3822
45 0.65 COMBO 69 Combination -2.618 -2.118 0.00178 0.00026 4.1E-05 0.3393
45 0 COMBO 70 Combination 2.372 -3.219 -0.0064 -0.0009 -0.0043 -2.4298
45 0.325 COMBO 70 Combination 2.399 -3.049 -0.0064 -0.0009 -0.0022 -1.3997
45 0.65 COMBO 70 Combination 2.423 -2.893 -0.0064 -0.0009 -0.0001 -0.4232
45 0 COMBO 71 Combination 5.806 -11.928 -0.013 -0.002 -0.0091 -8.8646
45 0.325 COMBO 71 Combination 5.832 -11.757 -0.013 -0.002 -0.0047 -4.971
45 0.65 COMBO 71 Combination 5.856 -11.601 -0.013 -0.002 -0.0003 -1.131
45 0 COMBO 72 Combination -0.924 -31.942 -0.019 -0.0028 -0.013 -21.485
45 0.325 COMBO 72 Combination -0.898 -31.771 -0.019 -0.0028 -0.0067 -11.01
45 0.65 COMBO 72 Combination -0.874 -31.616 -0.019 -0.0028 -0.0004 -0.5891
45 0 COMBO 73 Combination 5.038 -11.809 -0.017 -0.0026 -0.0119 -8.67
45 0.325 COMBO 73 Combination 5.064 -11.639 -0.017 -0.0026 -0.0061 -4.8153
45 0.65 COMBO 73 Combination 5.088 -11.483 -0.017 -0.0026 -0.0004 -1.0141
45 0 COMBO 74 Combination -1.692 -31.824 -0.023 -0.0034 -0.0158 -21.291
45 0.325 COMBO 74 Combination -1.666 -31.653 -0.023 -0.0034 -0.0082 -10.855
45 0.65 COMBO 74 Combination -1.642 -31.498 -0.023 -0.0034 -0.0005 -0.4722
45 0 COMBO 75 Combination -6.76 -9.994 0.04 0.0059 0.0273 -5.693
45 0.325 COMBO 75 Combination -6.734 -9.824 0.04 0.0059 0.0141 -2.4351
45 0.65 COMBO 75 Combination -6.71 -9.668 0.04 0.0059 0.00092 0.7692
45 0 COMBO 76 Combination -13.49 -30.009 0.034 0.0051 0.0234 -18.314
45 0.325 COMBO 76 Combination -13.464 -29.838 0.034 0.0051 0.0121 -8.4744
45 0.65 COMBO 76 Combination -13.44 -29.682 0.034 0.0051 0.00078 1.3111

189
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
45 0 COMBO 77 Combination -7.435 -9.89 0.036 0.0053 0.0243 -5.5219
45 0.325 COMBO 77 Combination -7.409 -9.72 0.036 0.0053 0.0126 -2.2982
45 0.65 COMBO 77 Combination -7.385 -9.564 0.036 0.0053 0.00081 0.8719
45 0 COMBO 78 Combination -14.165 -29.905 0.03 0.0044 0.0204 -18.143
45 0.325 COMBO 78 Combination -14.139 -29.734 0.03 0.0044 0.0105 -8.3375
45 0.65 COMBO 78 Combination -14.115 -29.579 0.03 0.0044 0.00068 1.4138
45 0 COMBO 79 Combination -3.267 -10.532 0.00989 0.0015 0.0067 -6.573
45 0.325 COMBO 79 Combination -3.24 -10.361 0.00989 0.0015 0.0035 -3.1384
45 0.65 COMBO 79 Combination -3.216 -10.206 0.00989 0.0015 0.00023 0.2427
45 0 COMBO 80 Combination -9.997 -30.546 0.00409 0.00061 0.0028 -19.194
45 0.325 COMBO 80 Combination -9.971 -30.376 0.00409 0.00061 0.0014 -9.1777
45 0.65 COMBO 80 Combination -9.947 -30.22 0.00409 0.00061 9.3E-05 0.7846
45 0 COMBO 81 Combination 1.774 -11.307 0.00175 0.00026 0.0012 -7.8455
45 0.325 COMBO 81 Combination 1.8 -11.137 0.00175 0.00026 0.00061 -4.1558
45 0.65 COMBO 81 Combination 1.824 -10.981 0.00175 0.00026 4E-05 -0.5198
45 0 COMBO 82 Combination -4.956 -31.322 -0.0041 -0.0006 -0.0028 -20.466
45 0.325 COMBO 82 Combination -4.93 -31.151 -0.0041 -0.0006 -0.0014 -10.195
45 0.65 COMBO 82 Combination -4.906 -30.995 -0.0041 -0.0006 -9E-05 0.0221
45 0 COMBO 83 Combination 5.725 -11.915 -0.014 -0.002 -0.0093 -8.8442
45 0.325 COMBO 83 Combination 5.751 -11.745 -0.014 -0.002 -0.0048 -4.9546
45 0.65 COMBO 83 Combination 5.775 -11.589 -0.014 -0.002 -0.0003 -1.1187
45 0 COMBO 84 Combination -1.005 -31.93 -0.019 -0.0029 -0.0133 -21.465
45 0.325 COMBO 84 Combination -0.979 -31.759 -0.019 -0.0029 -0.0069 -10.994
45 0.65 COMBO 84 Combination -0.955 -31.603 -0.019 -0.0029 -0.0004 -0.5768
45 0 COMBO 85 Combination 4.957 -11.797 -0.018 -0.0026 -0.0121 -8.6496
45 0.325 COMBO 85 Combination 4.983 -11.626 -0.018 -0.0026 -0.0063 -4.7989
45 0.65 COMBO 85 Combination 5.007 -11.471 -0.018 -0.0026 -0.0004 -1.0019
45 0 COMBO 86 Combination -1.773 -31.811 -0.024 -0.0035 -0.0161 -21.27
45 0.325 COMBO 86 Combination -1.747 -31.641 -0.024 -0.0035 -0.0083 -10.838
45 0.65 COMBO 86 Combination -1.723 -31.485 -0.024 -0.0035 -0.0005 -0.46
45 0 COMBO 87 Combination -6.841 -9.982 0.04 0.0059 0.027 -5.6726
45 0.325 COMBO 87 Combination -6.814 -9.811 0.04 0.0059 0.014 -2.4187
45 0.65 COMBO 87 Combination -6.791 -9.656 0.04 0.0059 0.00091 0.7814
45 0 COMBO 88 Combination -13.571 -29.996 0.034 0.005 0.0231 -18.293
45 0.325 COMBO 88 Combination -13.545 -29.826 0.034 0.005 0.0119 -8.458
45 0.65 COMBO 88 Combination -13.521 -29.67 0.034 0.005 0.00077 1.3233
45 0 COMBO 89 Combination -7.516 -9.878 0.035 0.0052 0.024 -5.5015
45 0.325 COMBO 89 Combination -7.489 -9.707 0.035 0.0052 0.0124 -2.2818
45 0.65 COMBO 89 Combination -7.465 -9.552 0.035 0.0052 0.00081 0.8842
45 0 COMBO 90 Combination -14.246 -29.892 0.03 0.0044 0.0201 -18.122
45 0.325 COMBO 90 Combination -14.219 -29.722 0.03 0.0044 0.0104 -8.3212
45 0.65 COMBO 90 Combination -14.195 -29.566 0.03 0.0044 0.00067 1.4261
45 0 COMBO 91 Combination -3.347 -10.519 0.00952 0.0014 0.0065 -6.5526
45 0.325 COMBO 91 Combination -3.321 -10.349 0.00952 0.0014 0.0033 -3.122
45 0.65 COMBO 91 Combination -3.297 -10.193 0.00952 0.0014 0.00022 0.2549
45 0 COMBO 92 Combination -10.077 -30.534 0.00372 0.00055 0.0025 -19.173
45 0.325 COMBO 92 Combination -10.051 -30.363 0.00372 0.00055 0.0013 -9.1613

190
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
45 0.65 COMBO 92 Combination -10.027 -30.208 0.00372 0.00055 8.5E-05 0.7968
45 0 COMBO 93 Combination 1.693 -11.295 0.00137 0.0002 0.00093 -7.8251
45 0.325 COMBO 93 Combination 1.72 -11.124 0.00137 0.0002 0.00048 -4.1395
45 0.65 COMBO 93 Combination 1.744 -10.969 0.00137 0.0002 3.1E-05 -0.5076
45 0 COMBO 94 Combination -5.037 -31.309 -0.0044 -0.0007 -0.003 -20.446
45 0.325 COMBO 94 Combination -5.01 -31.139 -0.0044 -0.0007 -0.0016 -10.179
45 0.65 COMBO 94 Combination -4.987 -30.983 -0.0044 -0.0007 -0.0001 0.0343
45 0 COMBO 95 Combination -3.254 -10.534 -0.0024 -0.0004 -0.0016 -6.5749
45 0.325 COMBO 95 Combination -3.228 -10.363 -0.0024 -0.0004 -0.0008 -3.1396
45 0.65 COMBO 95 Combination -3.204 -10.208 -0.0024 -0.0004 -5E-05 0.2421
45 0 COMBO 96 Combination -9.984 -30.548 -0.0082 -0.0012 -0.0056 -19.196
45 0.325 COMBO 96 Combination -9.958 -30.378 -0.0082 -0.0012 -0.0029 -9.1789
45 0.65 COMBO 96 Combination -9.934 -30.222 -0.0082 -0.0012 -0.0002 0.7839
45 0 COMBO 97 Combination 0.857 -11.166 -0.015 -0.0022 -0.0099 -7.6124
45 0.325 COMBO 97 Combination 0.883 -10.996 -0.015 -0.0022 -0.0051 -3.9691
45 0.65 COMBO 97 Combination 0.907 -10.84 -0.015 -0.0022 -0.0003 -0.3795
45 0 COMBO 98 Combination -5.873 -31.181 -0.02 -0.003 -0.0138 -20.233
45 0.325 COMBO 98 Combination -5.847 -31.01 -0.02 -0.003 -0.0071 -10.008
45 0.65 COMBO 98 Combination -5.823 -30.854 -0.02 -0.003 -0.0005 0.1624
45 0 COMBO 99 Combination -1.561 -2.614 -0.0037 -0.0005 -0.0025 -1.4369
45 0.325 COMBO 99 Combination -1.535 -2.444 -0.0037 -0.0005 -0.0013 -0.6057
45 0.65 COMBO 99 Combination -1.511 -2.288 -0.0037 -0.0005 -8E-05 0.1718
45 0 COMBO 100 Combination 2.55 -3.247 -0.016 -0.0023 -0.0108 -2.4743
45 0.325 COMBO 100 Combination 2.576 -3.076 -0.016 -0.0023 -0.0056 -1.4352
45 0.65 COMBO 100 Combination 2.6 -2.92 -0.016 -0.0023 -0.0004 -0.4498
45 0 COMBO 101 Combination -3.334 -10.521 -0.0028 -0.0004 -0.0019 -6.5545
45 0.325 COMBO 101 Combination -3.308 -10.351 -0.0028 -0.0004 -0.001 -3.1233
45 0.65 COMBO 101 Combination -3.284 -10.195 -0.0028 -0.0004 -6E-05 0.2543
45 0 COMBO 102 Combination -10.064 -30.536 -0.0086 -0.0013 -0.0058 -19.175
45 0.325 COMBO 102 Combination -10.038 -30.365 -0.0086 -0.0013 -0.003 -9.1626
45 0.65 COMBO 102 Combination -10.014 -30.21 -0.0086 -0.0013 -0.0002 0.7962
45 0 COMBO 103 Combination 0.776 -11.154 -0.015 -0.0022 -0.0101 -7.592
45 0.325 COMBO 103 Combination 0.803 -10.983 -0.015 -0.0022 -0.0052 -3.9528
45 0.65 COMBO 103 Combination 0.827 -10.828 -0.015 -0.0022 -0.0003 -0.3672
45 0 COMBO 104 Combination -5.954 -31.168 -0.021 -0.0031 -0.0141 -20.213
45 0.325 COMBO 104 Combination -5.928 -30.998 -0.021 -0.0031 -0.0073 -9.9921
45 0.65 COMBO 104 Combination -5.904 -30.842 -0.021 -0.0031 -0.0005 0.1747
45 0 COMBO 105 Combination 11.048 -3.412 -0.016 -0.0024 -0.0109 -3.8915
45 0.325 COMBO 105 Combination 11.064 -3.31 -0.016 -0.0024 -0.0056 -2.7865
45 0.65 COMBO 105 Combination 11.078 -3.217 -0.016 -0.0024 -0.0004 -1.7137
45 0 COMBO 106 Combination 10.024 -3.255 -0.022 -0.0032 -0.0147 -3.6321
45 0.325 COMBO 106 Combination 10.04 -3.152 -0.022 -0.0032 -0.0076 -2.5789
45 0.65 COMBO 106 Combination 10.054 -3.059 -0.022 -0.0032 -0.0005 -1.5579
45 0 COMBO 107 Combination -5.706 -0.835 0.055 0.0082 0.0376 0.3373
45 0.325 COMBO 107 Combination -5.69 -0.732 0.055 0.0082 0.0194 0.5947
45 0.65 COMBO 107 Combination -5.676 -0.639 0.055 0.0082 0.0013 0.8199
45 0 COMBO 108 Combination -6.606 -0.696 0.049 0.0073 0.0336 0.5654

191
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
45 0.325 COMBO 108 Combination -6.59 -0.594 0.049 0.0073 0.0173 0.7772
45 0.65 COMBO 108 Combination -6.576 -0.5 0.049 0.0073 0.0011 0.9569
45 0 COMBO 109 Combination -1.048 -1.551 0.015 0.0022 0.0101 -0.836
45 0.325 COMBO 109 Combination -1.032 -1.449 0.015 0.0022 0.0052 -0.343
45 0.65 COMBO 109 Combination -1.018 -1.356 0.015 0.0022 0.00034 0.1178
45 0 COMBO 110 Combination 5.673 -2.585 0.00403 0.0006 0.0027 -2.5327
45 0.325 COMBO 110 Combination 5.688 -2.483 0.00403 0.0006 0.0014 -1.6997
45 0.65 COMBO 110 Combination 5.703 -2.39 0.00403 0.0006 9.2E-05 -0.8988
45 0 COMBO 111 Combination -1.031 -1.554 -0.0015 -0.0002 -0.001 -0.8386
45 0.325 COMBO 111 Combination -1.015 -1.452 -0.0015 -0.0002 -0.0005 -0.3447
45 0.65 COMBO 111 Combination -1.001 -1.358 -0.0015 -0.0002 -3E-05 0.117
45 0 COMBO 112 Combination 4.45 -2.397 -0.018 -0.0026 -0.012 -2.2219
45 0.325 COMBO 112 Combination 4.466 -2.295 -0.018 -0.0026 -0.0062 -1.4507
45 0.65 COMBO 112 Combination 4.48 -2.201 -0.018 -0.0026 -0.0004 -0.7117
215 0 COMBO 1 Combination -11.738 -1.311 -0.612 -0.0002 0 0
215 0.10625 COMBO 1 Combination -11.717 -1.311 -0.612 -0.0002 0.065 0.1393
215 0.2125 COMBO 1 Combination -11.695 -1.311 -0.612 -0.0002 0.1301 0.2786
215 0.31875 COMBO 1 Combination -11.674 -1.311 -0.612 -0.0002 0.1951 0.4179
215 0.425 COMBO 1 Combination -11.652 -1.311 -0.612 -0.0002 0.2601 0.5572
215 0.53125 COMBO 1 Combination -11.631 -1.311 -0.612 -0.0002 0.3252 0.6965
215 0.6375 COMBO 1 Combination -11.609 -1.311 -0.612 -0.0002 0.3902 0.8358
215 0.74375 COMBO 1 Combination -11.588 -1.311 -0.612 -0.0002 0.4552 0.9751
215 0.85 COMBO 1 Combination -11.566 -1.311 -0.612 -0.0002 0.5203 1.1144
215 0 COMBO 2 Combination -11.821 -1.44 -0.703 -0.0006 0 0
215 0.10625 COMBO 2 Combination -11.8 -1.44 -0.703 -0.0006 0.0747 0.153
215 0.2125 COMBO 2 Combination -11.778 -1.44 -0.703 -0.0006 0.1494 0.306
215 0.31875 COMBO 2 Combination -11.757 -1.44 -0.703 -0.0006 0.224 0.4591
215 0.425 COMBO 2 Combination -11.735 -1.44 -0.703 -0.0006 0.2987 0.6121
215 0.53125 COMBO 2 Combination -11.714 -1.44 -0.703 -0.0006 0.3734 0.7651
215 0.6375 COMBO 2 Combination -11.692 -1.44 -0.703 -0.0006 0.4481 0.9181
215 0.74375 COMBO 2 Combination -11.671 -1.44 -0.703 -0.0006 0.5227 1.0712
215 0.85 COMBO 2 Combination -11.649 -1.44 -0.703 -0.0006 0.5974 1.2242
215 0 COMBO 3 Combination -11.457 -1.025 -0.402 0.00016 0 0
215 0.10625 COMBO 3 Combination -11.436 -1.025 -0.402 0.00016 0.0427 0.1089
215 0.2125 COMBO 3 Combination -11.414 -1.025 -0.402 0.00016 0.0855 0.2178
215 0.31875 COMBO 3 Combination -11.393 -1.025 -0.402 0.00016 0.1282 0.3268
215 0.425 COMBO 3 Combination -11.371 -1.025 -0.402 0.00016 0.1709 0.4357
215 0.53125 COMBO 3 Combination -11.35 -1.025 -0.402 0.00016 0.2137 0.5446
215 0.6375 COMBO 3 Combination -11.328 -1.025 -0.402 0.00016 0.2564 0.6535
215 0.74375 COMBO 3 Combination -11.307 -1.025 -0.402 0.00016 0.2991 0.7625
215 0.85 COMBO 3 Combination -11.286 -1.025 -0.402 0.00016 0.3419 0.8714
215 0 COMBO 4 Combination -11.544 -1.266 -0.475 -0.0002 0 0
215 0.10625 COMBO 4 Combination -11.522 -1.266 -0.475 -0.0002 0.0504 0.1346
215 0.2125 COMBO 4 Combination -11.501 -1.266 -0.475 -0.0002 0.1008 0.2691
215 0.31875 COMBO 4 Combination -11.48 -1.266 -0.475 -0.0002 0.1513 0.4037
215 0.425 COMBO 4 Combination -11.458 -1.266 -0.475 -0.0002 0.2017 0.5382
215 0.53125 COMBO 4 Combination -11.437 -1.266 -0.475 -0.0002 0.2521 0.6728

192
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
215 0.6375 COMBO 4 Combination -11.415 -1.266 -0.475 -0.0002 0.3025 0.8074
215 0.74375 COMBO 4 Combination -11.394 -1.266 -0.475 -0.0002 0.353 0.9419
215 0.85 COMBO 4 Combination -11.372 -1.266 -0.475 -0.0002 0.4034 1.0765
215 0 COMBO 5 Combination -11.663 -0.904 -0.477 0.0013 0 0
215 0.10625 COMBO 5 Combination -11.642 -0.904 -0.477 0.0013 0.0506 0.0961
215 0.2125 COMBO 5 Combination -11.62 -0.904 -0.477 0.0013 0.1013 0.1921
215 0.31875 COMBO 5 Combination -11.599 -0.904 -0.477 0.0013 0.1519 0.2882
215 0.425 COMBO 5 Combination -11.577 -0.904 -0.477 0.0013 0.2026 0.3842
215 0.53125 COMBO 5 Combination -11.556 -0.904 -0.477 0.0013 0.2532 0.4803
215 0.6375 COMBO 5 Combination -11.534 -0.904 -0.477 0.0013 0.3038 0.5764
215 0.74375 COMBO 5 Combination -11.513 -0.904 -0.477 0.0013 0.3545 0.6724
215 0.85 COMBO 5 Combination -11.492 -0.904 -0.477 0.0013 0.4051 0.7685
215 0 COMBO 6 Combination -11.748 -1.145 -0.548 0.00089 0 0
215 0.10625 COMBO 6 Combination -11.726 -1.145 -0.548 0.00089 0.0582 0.1216
215 0.2125 COMBO 6 Combination -11.705 -1.145 -0.548 0.00089 0.1164 0.2433
215 0.31875 COMBO 6 Combination -11.683 -1.145 -0.548 0.00089 0.1747 0.3649
215 0.425 COMBO 6 Combination -11.662 -1.145 -0.548 0.00089 0.2329 0.4865
215 0.53125 COMBO 6 Combination -11.64 -1.145 -0.548 0.00089 0.2911 0.6082
215 0.6375 COMBO 6 Combination -11.619 -1.145 -0.548 0.00089 0.3493 0.7298
215 0.74375 COMBO 6 Combination -11.597 -1.145 -0.548 0.00089 0.4075 0.8514
215 0.85 COMBO 6 Combination -11.576 -1.145 -0.548 0.00089 0.4658 0.9731
215 0 COMBO 7 Combination -11.698 -0.887 -0.536 0.00077 0 0
215 0.10625 COMBO 7 Combination -11.676 -0.887 -0.536 0.00077 0.0569 0.0942
215 0.2125 COMBO 7 Combination -11.655 -0.887 -0.536 0.00077 0.1138 0.1885
215 0.31875 COMBO 7 Combination -11.634 -0.887 -0.536 0.00077 0.1707 0.2827
215 0.425 COMBO 7 Combination -11.612 -0.887 -0.536 0.00077 0.2276 0.377
215 0.53125 COMBO 7 Combination -11.591 -0.887 -0.536 0.00077 0.2845 0.4712
215 0.6375 COMBO 7 Combination -11.569 -0.887 -0.536 0.00077 0.3414 0.5655
215 0.74375 COMBO 7 Combination -11.548 -0.887 -0.536 0.00077 0.3984 0.6597
215 0.85 COMBO 7 Combination -11.526 -0.887 -0.536 0.00077 0.4553 0.754
215 0 COMBO 8 Combination -11.478 -0.826 -0.474 -0.0001 0 0
215 0.10625 COMBO 8 Combination -11.457 -0.826 -0.474 -0.0001 0.0504 0.0878
215 0.2125 COMBO 8 Combination -11.435 -0.826 -0.474 -0.0001 0.1008 0.1756
215 0.31875 COMBO 8 Combination -11.414 -0.826 -0.474 -0.0001 0.1511 0.2634
215 0.425 COMBO 8 Combination -11.393 -0.826 -0.474 -0.0001 0.2015 0.3512
215 0.53125 COMBO 8 Combination -11.371 -0.826 -0.474 -0.0001 0.2519 0.4391
215 0.6375 COMBO 8 Combination -11.35 -0.826 -0.474 -0.0001 0.3023 0.5269
215 0.74375 COMBO 8 Combination -11.328 -0.826 -0.474 -0.0001 0.3526 0.6147
215 0.85 COMBO 8 Combination -11.307 -0.826 -0.474 -0.0001 0.403 0.7025
215 0 COMBO 9 Combination -11.738 -1.311 -0.612 -0.0002 0 0
215 0.10625 COMBO 9 Combination -11.717 -1.311 -0.612 -0.0002 0.065 0.1393
215 0.2125 COMBO 9 Combination -11.695 -1.311 -0.612 -0.0002 0.1301 0.2786
215 0.31875 COMBO 9 Combination -11.674 -1.311 -0.612 -0.0002 0.1951 0.4179
215 0.425 COMBO 9 Combination -11.652 -1.311 -0.612 -0.0002 0.2601 0.5572
215 0.53125 COMBO 9 Combination -11.631 -1.311 -0.612 -0.0002 0.3252 0.6965
215 0.6375 COMBO 9 Combination -11.609 -1.311 -0.612 -0.0002 0.3902 0.8358
215 0.74375 COMBO 9 Combination -11.588 -1.311 -0.612 -0.0002 0.4552 0.9751

193
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
215 0.85 COMBO 9 Combination -11.566 -1.311 -0.612 -0.0002 0.5203 1.1144
215 0 COMBO 10 Combination -11.821 -1.44 -0.703 -0.0006 0 0
215 0.10625 COMBO 10 Combination -11.8 -1.44 -0.703 -0.0006 0.0747 0.153
215 0.2125 COMBO 10 Combination -11.778 -1.44 -0.703 -0.0006 0.1494 0.306
215 0.31875 COMBO 10 Combination -11.757 -1.44 -0.703 -0.0006 0.224 0.4591
215 0.425 COMBO 10 Combination -11.735 -1.44 -0.703 -0.0006 0.2987 0.6121
215 0.53125 COMBO 10 Combination -11.714 -1.44 -0.703 -0.0006 0.3734 0.7651
215 0.6375 COMBO 10 Combination -11.692 -1.44 -0.703 -0.0006 0.4481 0.9181
215 0.74375 COMBO 10 Combination -11.671 -1.44 -0.703 -0.0006 0.5227 1.0712
215 0.85 COMBO 10 Combination -11.649 -1.44 -0.703 -0.0006 0.5974 1.2242
215 0 COMBO 11 Combination -25.299 -4.99 -1.494 0.00019 0 0
215 0.10625 COMBO 11 Combination -25.278 -4.99 -1.494 0.00019 0.1588 0.5301
215 0.2125 COMBO 11 Combination -25.256 -4.99 -1.494 0.00019 0.3176 1.0603
215 0.31875 COMBO 11 Combination -25.235 -4.99 -1.494 0.00019 0.4763 1.5904
215 0.425 COMBO 11 Combination -25.214 -4.99 -1.494 0.00019 0.6351 2.1206
215 0.53125 COMBO 11 Combination -25.192 -4.99 -1.494 0.00019 0.7939 2.6507
215 0.6375 COMBO 11 Combination -25.171 -4.99 -1.494 0.00019 0.9527 3.1809
215 0.74375 COMBO 11 Combination -25.149 -4.99 -1.494 0.00019 1.1114 3.711
215 0.85 COMBO 11 Combination -25.128 -4.99 -1.494 0.00019 1.2702 4.2411
215 0 COMBO 12 Combination -11.754 -1.307 -0.608 -0.0001 0 0
215 0.10625 COMBO 12 Combination -11.733 -1.307 -0.608 -0.0001 0.0646 0.1388
215 0.2125 COMBO 12 Combination -11.711 -1.307 -0.608 -0.0001 0.1292 0.2777
215 0.31875 COMBO 12 Combination -11.69 -1.307 -0.608 -0.0001 0.1938 0.4165
215 0.425 COMBO 12 Combination -11.668 -1.307 -0.608 -0.0001 0.2584 0.5553
215 0.53125 COMBO 12 Combination -11.647 -1.307 -0.608 -0.0001 0.323 0.6941
215 0.6375 COMBO 12 Combination -11.625 -1.307 -0.608 -0.0001 0.3875 0.833
215 0.74375 COMBO 12 Combination -11.604 -1.307 -0.608 -0.0001 0.4521 0.9718
215 0.85 COMBO 12 Combination -11.582 -1.307 -0.608 -0.0001 0.5167 1.1106
215 0 COMBO 13 Combination -11.74 -1.316 -0.618 -0.0002 0 0
215 0.10625 COMBO 13 Combination -11.718 -1.316 -0.618 -0.0002 0.0657 0.1399
215 0.2125 COMBO 13 Combination -11.697 -1.316 -0.618 -0.0002 0.1314 0.2797
215 0.31875 COMBO 13 Combination -11.676 -1.316 -0.618 -0.0002 0.1971 0.4196
215 0.425 COMBO 13 Combination -11.654 -1.316 -0.618 -0.0002 0.2628 0.5595
215 0.53125 COMBO 13 Combination -11.633 -1.316 -0.618 -0.0002 0.3285 0.6993
215 0.6375 COMBO 13 Combination -11.611 -1.316 -0.618 -0.0002 0.3941 0.8392
215 0.74375 COMBO 13 Combination -11.59 -1.316 -0.618 -0.0002 0.4598 0.9791
215 0.85 COMBO 13 Combination -11.568 -1.316 -0.618 -0.0002 0.5255 1.1189
215 0 COMBO 14 Combination -21.971 -4.167 -1.342 -0.0002 0 0
215 0.10625 COMBO 14 Combination -21.95 -4.167 -1.342 -0.0002 0.1426 0.4427
215 0.2125 COMBO 14 Combination -21.928 -4.167 -1.342 -0.0002 0.2851 0.8854
215 0.31875 COMBO 14 Combination -21.907 -4.167 -1.342 -0.0002 0.4277 1.3282
215 0.425 COMBO 14 Combination -21.885 -4.167 -1.342 -0.0002 0.5703 1.7709
215 0.53125 COMBO 14 Combination -21.864 -4.167 -1.342 -0.0002 0.7129 2.2136
215 0.6375 COMBO 14 Combination -21.843 -4.167 -1.342 -0.0002 0.8554 2.6563
215 0.74375 COMBO 14 Combination -21.821 -4.167 -1.342 -0.0002 0.998 3.0991
215 0.85 COMBO 14 Combination -21.8 -4.167 -1.342 -0.0002 1.1406 3.5418
215 0 COMBO 15 Combination -11.812 -1.405 -0.677 -0.0005 0 0

194
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
215 0.10625 COMBO 15 Combination -11.791 -1.405 -0.677 -0.0005 0.0719 0.1492
215 0.2125 COMBO 15 Combination -11.769 -1.405 -0.677 -0.0005 0.1439 0.2985
215 0.31875 COMBO 15 Combination -11.748 -1.405 -0.677 -0.0005 0.2158 0.4477
215 0.425 COMBO 15 Combination -11.726 -1.405 -0.677 -0.0005 0.2877 0.597
215 0.53125 COMBO 15 Combination -11.705 -1.405 -0.677 -0.0005 0.3597 0.7462
215 0.6375 COMBO 15 Combination -11.684 -1.405 -0.677 -0.0005 0.4316 0.8954
215 0.74375 COMBO 15 Combination -11.662 -1.405 -0.677 -0.0005 0.5035 1.0447
215 0.85 COMBO 15 Combination -11.641 -1.405 -0.677 -0.0005 0.5755 1.1939
215 0 COMBO 16 Combination -11.802 -1.412 -0.685 -0.0006 0 0
215 0.10625 COMBO 16 Combination -11.78 -1.412 -0.685 -0.0006 0.0728 0.15
215 0.2125 COMBO 16 Combination -11.759 -1.412 -0.685 -0.0006 0.1455 0.3
215 0.31875 COMBO 16 Combination -11.737 -1.412 -0.685 -0.0006 0.2183 0.4501
215 0.425 COMBO 16 Combination -11.716 -1.412 -0.685 -0.0006 0.291 0.6001
215 0.53125 COMBO 16 Combination -11.694 -1.412 -0.685 -0.0006 0.3638 0.7501
215 0.6375 COMBO 16 Combination -11.673 -1.412 -0.685 -0.0006 0.4366 0.9001
215 0.74375 COMBO 16 Combination -11.651 -1.412 -0.685 -0.0006 0.5093 1.0501
215 0.85 COMBO 16 Combination -11.63 -1.412 -0.685 -0.0006 0.5821 1.2001
215 0 COMBO 17 Combination -21.921 -4.067 -1.271 0.00014 0 0
215 0.10625 COMBO 17 Combination -21.9 -4.067 -1.271 0.00014 0.135 0.4321
215 0.2125 COMBO 17 Combination -21.878 -4.067 -1.271 0.00014 0.27 0.8642
215 0.31875 COMBO 17 Combination -21.857 -4.067 -1.271 0.00014 0.405 1.2962
215 0.425 COMBO 17 Combination -21.835 -4.067 -1.271 0.00014 0.54 1.7283
215 0.53125 COMBO 17 Combination -21.814 -4.067 -1.271 0.00014 0.675 2.1604
215 0.6375 COMBO 17 Combination -21.792 -4.067 -1.271 0.00014 0.8101 2.5925
215 0.74375 COMBO 17 Combination -21.771 -4.067 -1.271 0.00014 0.9451 3.0245
215 0.85 COMBO 17 Combination -21.749 -4.067 -1.271 0.00014 1.0801 3.4566
215 0 COMBO 18 Combination -21.91 -4.074 -1.278 4.6E-05 0 0
215 0.10625 COMBO 18 Combination -21.889 -4.074 -1.278 4.6E-05 0.1358 0.4329
215 0.2125 COMBO 18 Combination -21.867 -4.074 -1.278 4.6E-05 0.2717 0.8657
215 0.31875 COMBO 18 Combination -21.846 -4.074 -1.278 4.6E-05 0.4075 1.2986
215 0.425 COMBO 18 Combination -21.825 -4.074 -1.278 4.6E-05 0.5433 1.7314
215 0.53125 COMBO 18 Combination -21.803 -4.074 -1.278 4.6E-05 0.6792 2.1643
215 0.6375 COMBO 18 Combination -21.782 -4.074 -1.278 4.6E-05 0.815 2.5971
215 0.74375 COMBO 18 Combination -21.76 -4.074 -1.278 4.6E-05 0.9508 3.03
215 0.85 COMBO 18 Combination -21.739 -4.074 -1.278 4.6E-05 1.0867 3.4628
215 0 COMBO 19 Combination -21.983 -4.163 -1.339 -0.0002 0 0
215 0.10625 COMBO 19 Combination -21.962 -4.163 -1.339 -0.0002 0.1422 0.4424
215 0.2125 COMBO 19 Combination -21.94 -4.163 -1.339 -0.0002 0.2845 0.8847
215 0.31875 COMBO 19 Combination -21.919 -4.163 -1.339 -0.0002 0.4267 1.3271
215 0.425 COMBO 19 Combination -21.897 -4.163 -1.339 -0.0002 0.569 1.7695
215 0.53125 COMBO 19 Combination -21.876 -4.163 -1.339 -0.0002 0.7112 2.2118
215 0.6375 COMBO 19 Combination -21.854 -4.163 -1.339 -0.0002 0.8534 2.6542
215 0.74375 COMBO 19 Combination -21.833 -4.163 -1.339 -0.0002 0.9957 3.0966
215 0.85 COMBO 19 Combination -21.812 -4.163 -1.339 -0.0002 1.1379 3.539
215 0 COMBO 20 Combination -21.973 -4.171 -1.347 -0.0003 0 0
215 0.10625 COMBO 20 Combination -21.951 -4.171 -1.347 -0.0003 0.1431 0.4431
215 0.2125 COMBO 20 Combination -21.93 -4.171 -1.347 -0.0003 0.2861 0.8863

195
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
215 0.31875 COMBO 20 Combination -21.908 -4.171 -1.347 -0.0003 0.4292 1.3294
215 0.425 COMBO 20 Combination -21.887 -4.171 -1.347 -0.0003 0.5723 1.7726
215 0.53125 COMBO 20 Combination -21.865 -4.171 -1.347 -0.0003 0.7153 2.2157
215 0.6375 COMBO 20 Combination -21.844 -4.171 -1.347 -0.0003 0.8584 2.6589
215 0.74375 COMBO 20 Combination -21.822 -4.171 -1.347 -0.0003 1.0015 3.102
215 0.85 COMBO 20 Combination -21.801 -4.171 -1.347 -0.0003 1.1445 3.5452
215 0 COMBO 21 Combination -11.457 -1.025 -0.402 0.00016 0 0
215 0.10625 COMBO 21 Combination -11.436 -1.025 -0.402 0.00016 0.0427 0.1089
215 0.2125 COMBO 21 Combination -11.414 -1.025 -0.402 0.00016 0.0855 0.2178
215 0.31875 COMBO 21 Combination -11.393 -1.025 -0.402 0.00016 0.1282 0.3268
215 0.425 COMBO 21 Combination -11.371 -1.025 -0.402 0.00016 0.1709 0.4357
215 0.53125 COMBO 21 Combination -11.35 -1.025 -0.402 0.00016 0.2137 0.5446
215 0.6375 COMBO 21 Combination -11.328 -1.025 -0.402 0.00016 0.2564 0.6535
215 0.74375 COMBO 21 Combination -11.307 -1.025 -0.402 0.00016 0.2991 0.7625
215 0.85 COMBO 21 Combination -11.286 -1.025 -0.402 0.00016 0.3419 0.8714
215 0 COMBO 22 Combination -11.544 -1.266 -0.475 -0.0002 0 0
215 0.10625 COMBO 22 Combination -11.522 -1.266 -0.475 -0.0002 0.0504 0.1346
215 0.2125 COMBO 22 Combination -11.501 -1.266 -0.475 -0.0002 0.1008 0.2691
215 0.31875 COMBO 22 Combination -11.48 -1.266 -0.475 -0.0002 0.1513 0.4037
215 0.425 COMBO 22 Combination -11.458 -1.266 -0.475 -0.0002 0.2017 0.5382
215 0.53125 COMBO 22 Combination -11.437 -1.266 -0.475 -0.0002 0.2521 0.6728
215 0.6375 COMBO 22 Combination -11.415 -1.266 -0.475 -0.0002 0.3025 0.8074
215 0.74375 COMBO 22 Combination -11.394 -1.266 -0.475 -0.0002 0.353 0.9419
215 0.85 COMBO 22 Combination -11.372 -1.266 -0.475 -0.0002 0.4034 1.0765
215 0 COMBO 23 Combination -11.663 -0.904 -0.477 0.0013 0 0
215 0.10625 COMBO 23 Combination -11.642 -0.904 -0.477 0.0013 0.0506 0.0961
215 0.2125 COMBO 23 Combination -11.62 -0.904 -0.477 0.0013 0.1013 0.1921
215 0.31875 COMBO 23 Combination -11.599 -0.904 -0.477 0.0013 0.1519 0.2882
215 0.425 COMBO 23 Combination -11.577 -0.904 -0.477 0.0013 0.2026 0.3842
215 0.53125 COMBO 23 Combination -11.556 -0.904 -0.477 0.0013 0.2532 0.4803
215 0.6375 COMBO 23 Combination -11.534 -0.904 -0.477 0.0013 0.3038 0.5764
215 0.74375 COMBO 23 Combination -11.513 -0.904 -0.477 0.0013 0.3545 0.6724
215 0.85 COMBO 23 Combination -11.492 -0.904 -0.477 0.0013 0.4051 0.7685
215 0 COMBO 24 Combination -11.748 -1.145 -0.548 0.00089 0 0
215 0.10625 COMBO 24 Combination -11.726 -1.145 -0.548 0.00089 0.0582 0.1216
215 0.2125 COMBO 24 Combination -11.705 -1.145 -0.548 0.00089 0.1164 0.2433
215 0.31875 COMBO 24 Combination -11.683 -1.145 -0.548 0.00089 0.1747 0.3649
215 0.425 COMBO 24 Combination -11.662 -1.145 -0.548 0.00089 0.2329 0.4865
215 0.53125 COMBO 24 Combination -11.64 -1.145 -0.548 0.00089 0.2911 0.6082
215 0.6375 COMBO 24 Combination -11.619 -1.145 -0.548 0.00089 0.3493 0.7298
215 0.74375 COMBO 24 Combination -11.597 -1.145 -0.548 0.00089 0.4075 0.8514
215 0.85 COMBO 24 Combination -11.576 -1.145 -0.548 0.00089 0.4658 0.9731
215 0 COMBO 25 Combination -11.698 -0.887 -0.536 0.00077 0 0
215 0.10625 COMBO 25 Combination -11.676 -0.887 -0.536 0.00077 0.0569 0.0942
215 0.2125 COMBO 25 Combination -11.655 -0.887 -0.536 0.00077 0.1138 0.1885
215 0.31875 COMBO 25 Combination -11.634 -0.887 -0.536 0.00077 0.1707 0.2827
215 0.425 COMBO 25 Combination -11.612 -0.887 -0.536 0.00077 0.2276 0.377

196
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
215 0.53125 COMBO 25 Combination -11.591 -0.887 -0.536 0.00077 0.2845 0.4712
215 0.6375 COMBO 25 Combination -11.569 -0.887 -0.536 0.00077 0.3414 0.5655
215 0.74375 COMBO 25 Combination -11.548 -0.887 -0.536 0.00077 0.3984 0.6597
215 0.85 COMBO 25 Combination -11.526 -0.887 -0.536 0.00077 0.4553 0.754
215 0 COMBO 26 Combination -11.478 -0.826 -0.474 -0.0001 0 0
215 0.10625 COMBO 26 Combination -11.457 -0.826 -0.474 -0.0001 0.0504 0.0878
215 0.2125 COMBO 26 Combination -11.435 -0.826 -0.474 -0.0001 0.1008 0.1756
215 0.31875 COMBO 26 Combination -11.414 -0.826 -0.474 -0.0001 0.1511 0.2634
215 0.425 COMBO 26 Combination -11.393 -0.826 -0.474 -0.0001 0.2015 0.3512
215 0.53125 COMBO 26 Combination -11.371 -0.826 -0.474 -0.0001 0.2519 0.4391
215 0.6375 COMBO 26 Combination -11.35 -0.826 -0.474 -0.0001 0.3023 0.5269
215 0.74375 COMBO 26 Combination -11.328 -0.826 -0.474 -0.0001 0.3526 0.6147
215 0.85 COMBO 26 Combination -11.307 -0.826 -0.474 -0.0001 0.403 0.7025
215 0 COMBO 27 Combination -11.734 -1.337 2.795 -0.0008 0 0
215 0.10625 COMBO 27 Combination -11.713 -1.337 2.795 -0.0008 -0.297 0.1421
215 0.2125 COMBO 27 Combination -11.691 -1.337 2.795 -0.0008 -0.594 0.2841
215 0.31875 COMBO 27 Combination -11.67 -1.337 2.795 -0.0008 -0.891 0.4262
215 0.425 COMBO 27 Combination -11.648 -1.337 2.795 -0.0008 -1.188 0.5683
215 0.53125 COMBO 27 Combination -11.627 -1.337 2.795 -0.0008 -1.485 0.7103
215 0.6375 COMBO 27 Combination -11.605 -1.337 2.795 -0.0008 -1.782 0.8524
215 0.74375 COMBO 27 Combination -11.584 -1.337 2.795 -0.0008 -2.079 0.9945
215 0.85 COMBO 27 Combination -11.562 -1.337 2.795 -0.0008 -2.376 1.1366
215 0 COMBO 28 Combination -9.968 0.51 -0.564 -0.0004 0 0
215 0.10625 COMBO 28 Combination -9.946 0.51 -0.564 -0.0004 0.0599 -0.0542
215 0.2125 COMBO 28 Combination -9.925 0.51 -0.564 -0.0004 0.1198 -0.1084
215 0.31875 COMBO 28 Combination -9.903 0.51 -0.564 -0.0004 0.1796 -0.1626
215 0.425 COMBO 28 Combination -9.882 0.51 -0.564 -0.0004 0.2395 -0.2168
215 0.53125 COMBO 28 Combination -9.86 0.51 -0.564 -0.0004 0.2994 -0.271
215 0.6375 COMBO 28 Combination -9.839 0.51 -0.564 -0.0004 0.3593 -0.3253
215 0.74375 COMBO 28 Combination -9.817 0.51 -0.564 -0.0004 0.4192 -0.3795
215 0.85 COMBO 28 Combination -9.796 0.51 -0.564 -0.0004 0.4791 -0.4337
215 0 COMBO 29 Combination -21.761 -3.952 -1.184 8.5E-06 0 0
215 0.10625 COMBO 29 Combination -21.739 -3.952 -1.184 8.5E-06 0.1259 0.4199
215 0.2125 COMBO 29 Combination -21.718 -3.952 -1.184 8.5E-06 0.2517 0.8399
215 0.31875 COMBO 29 Combination -21.696 -3.952 -1.184 8.5E-06 0.3776 1.2598
215 0.425 COMBO 29 Combination -21.675 -3.952 -1.184 8.5E-06 0.5034 1.6798
215 0.53125 COMBO 29 Combination -21.653 -3.952 -1.184 8.5E-06 0.6293 2.0997
215 0.6375 COMBO 29 Combination -21.632 -3.952 -1.184 8.5E-06 0.7551 2.5196
215 0.74375 COMBO 29 Combination -21.61 -3.952 -1.184 8.5E-06 0.881 2.9396
215 0.85 COMBO 29 Combination -21.589 -3.952 -1.184 8.5E-06 1.0068 3.3595
215 0 COMBO 30 Combination -21.826 -4.133 -1.239 -0.0003 0 0
215 0.10625 COMBO 30 Combination -21.804 -4.133 -1.239 -0.0003 0.1316 0.4392
215 0.2125 COMBO 30 Combination -21.783 -4.133 -1.239 -0.0003 0.2632 0.8783
215 0.31875 COMBO 30 Combination -21.761 -4.133 -1.239 -0.0003 0.3949 1.3175
215 0.425 COMBO 30 Combination -21.74 -4.133 -1.239 -0.0003 0.5265 1.7567
215 0.53125 COMBO 30 Combination -21.718 -4.133 -1.239 -0.0003 0.6581 2.1958
215 0.6375 COMBO 30 Combination -21.697 -4.133 -1.239 -0.0003 0.7897 2.635

197
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
215 0.74375 COMBO 30 Combination -21.675 -4.133 -1.239 -0.0003 0.9213 3.0742
215 0.85 COMBO 30 Combination -21.654 -4.133 -1.239 -0.0003 1.0529 3.5133
215 0 COMBO 31 Combination -21.915 -3.862 -1.24 0.00084 0 0
215 0.10625 COMBO 31 Combination -21.894 -3.862 -1.24 0.00084 0.1318 0.4103
215 0.2125 COMBO 31 Combination -21.872 -3.862 -1.24 0.00084 0.2636 0.8206
215 0.31875 COMBO 31 Combination -21.851 -3.862 -1.24 0.00084 0.3953 1.2309
215 0.425 COMBO 31 Combination -21.829 -3.862 -1.24 0.00084 0.5271 1.6412
215 0.53125 COMBO 31 Combination -21.808 -3.862 -1.24 0.00084 0.6589 2.0515
215 0.6375 COMBO 31 Combination -21.786 -3.862 -1.24 0.00084 0.7907 2.4618
215 0.74375 COMBO 31 Combination -21.765 -3.862 -1.24 0.00084 0.9224 2.8721
215 0.85 COMBO 31 Combination -21.743 -3.862 -1.24 0.00084 1.0542 3.2823
215 0 COMBO 32 Combination -21.978 -4.042 -1.294 0.00056 0 0
215 0.10625 COMBO 32 Combination -21.957 -4.042 -1.294 0.00056 0.1375 0.4295
215 0.2125 COMBO 32 Combination -21.936 -4.042 -1.294 0.00056 0.2749 0.8589
215 0.31875 COMBO 32 Combination -21.914 -4.042 -1.294 0.00056 0.4124 1.2884
215 0.425 COMBO 32 Combination -21.893 -4.042 -1.294 0.00056 0.5499 1.7179
215 0.53125 COMBO 32 Combination -21.871 -4.042 -1.294 0.00056 0.6873 2.1474
215 0.6375 COMBO 32 Combination -21.85 -4.042 -1.294 0.00056 0.8248 2.5768
215 0.74375 COMBO 32 Combination -21.828 -4.042 -1.294 0.00056 0.9622 3.0063
215 0.85 COMBO 32 Combination -21.807 -4.042 -1.294 0.00056 1.0997 3.4358
215 0 COMBO 33 Combination -21.941 -3.849 -1.285 0.00046 0 0
215 0.10625 COMBO 33 Combination -21.92 -3.849 -1.285 0.00046 0.1365 0.4089
215 0.2125 COMBO 33 Combination -21.898 -3.849 -1.285 0.00046 0.273 0.8179
215 0.31875 COMBO 33 Combination -21.877 -3.849 -1.285 0.00046 0.4094 1.2268
215 0.425 COMBO 33 Combination -21.855 -3.849 -1.285 0.00046 0.5459 1.6357
215 0.53125 COMBO 33 Combination -21.834 -3.849 -1.285 0.00046 0.6824 2.0447
215 0.6375 COMBO 33 Combination -21.812 -3.849 -1.285 0.00046 0.8189 2.4536
215 0.74375 COMBO 33 Combination -21.791 -3.849 -1.285 0.00046 0.9554 2.8625
215 0.85 COMBO 33 Combination -21.769 -3.849 -1.285 0.00046 1.0918 3.2715
215 0 COMBO 34 Combination -21.776 -3.803 -1.238 -0.0002 0 0
215 0.10625 COMBO 34 Combination -21.755 -3.803 -1.238 -0.0002 0.1316 0.4041
215 0.2125 COMBO 34 Combination -21.734 -3.803 -1.238 -0.0002 0.2632 0.8082
215 0.31875 COMBO 34 Combination -21.712 -3.803 -1.238 -0.0002 0.3947 1.2123
215 0.425 COMBO 34 Combination -21.691 -3.803 -1.238 -0.0002 0.5263 1.6164
215 0.53125 COMBO 34 Combination -21.669 -3.803 -1.238 -0.0002 0.6579 2.0205
215 0.6375 COMBO 34 Combination -21.648 -3.803 -1.238 -0.0002 0.7895 2.4246
215 0.74375 COMBO 34 Combination -21.626 -3.803 -1.238 -0.0002 0.9211 2.8288
215 0.85 COMBO 34 Combination -21.605 -3.803 -1.238 -0.0002 1.0527 3.2329
215 0 COMBO 35 Combination -11.602 -1.19 -0.52 -0.0002 0 0
215 0.10625 COMBO 35 Combination -11.58 -1.19 -0.52 -0.0002 0.0552 0.1265
215 0.2125 COMBO 35 Combination -11.559 -1.19 -0.52 -0.0002 0.1104 0.2529
215 0.31875 COMBO 35 Combination -11.537 -1.19 -0.52 -0.0002 0.1656 0.3794
215 0.425 COMBO 35 Combination -11.516 -1.19 -0.52 -0.0002 0.2208 0.5058
215 0.53125 COMBO 35 Combination -11.494 -1.19 -0.52 -0.0002 0.2761 0.6323
215 0.6375 COMBO 35 Combination -11.473 -1.19 -0.52 -0.0002 0.3313 0.7587
215 0.74375 COMBO 35 Combination -11.451 -1.19 -0.52 -0.0002 0.3865 0.8852
215 0.85 COMBO 35 Combination -11.43 -1.19 -0.52 -0.0002 0.4417 1.0116

198
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
215 0 COMBO 36 Combination -11.591 -1.197 -0.527 -0.0003 0 0
215 0.10625 COMBO 36 Combination -11.57 -1.197 -0.527 -0.0003 0.056 0.1272
215 0.2125 COMBO 36 Combination -11.548 -1.197 -0.527 -0.0003 0.1121 0.2545
215 0.31875 COMBO 36 Combination -11.527 -1.197 -0.527 -0.0003 0.1681 0.3817
215 0.425 COMBO 36 Combination -11.505 -1.197 -0.527 -0.0003 0.2241 0.5089
215 0.53125 COMBO 36 Combination -11.484 -1.197 -0.527 -0.0003 0.2802 0.6362
215 0.6375 COMBO 36 Combination -11.462 -1.197 -0.527 -0.0003 0.3362 0.7634
215 0.74375 COMBO 36 Combination -11.441 -1.197 -0.527 -0.0003 0.3923 0.8906
215 0.85 COMBO 36 Combination -11.419 -1.197 -0.527 -0.0003 0.4483 1.0179
215 0 COMBO 37 Combination -11.667 -1.371 -0.574 -0.0005 0 0
215 0.10625 COMBO 37 Combination -11.645 -1.371 -0.574 -0.0005 0.061 0.1457
215 0.2125 COMBO 37 Combination -11.624 -1.371 -0.574 -0.0005 0.122 0.2914
215 0.31875 COMBO 37 Combination -11.602 -1.371 -0.574 -0.0005 0.1829 0.437
215 0.425 COMBO 37 Combination -11.581 -1.371 -0.574 -0.0005 0.2439 0.5827
215 0.53125 COMBO 37 Combination -11.559 -1.371 -0.574 -0.0005 0.3049 0.7284
215 0.6375 COMBO 37 Combination -11.538 -1.371 -0.574 -0.0005 0.3659 0.8741
215 0.74375 COMBO 37 Combination -11.516 -1.371 -0.574 -0.0005 0.4268 1.0198
215 0.85 COMBO 37 Combination -11.495 -1.371 -0.574 -0.0005 0.4878 1.1655
215 0 COMBO 38 Combination -11.656 -1.378 -0.582 -0.0006 0 0
215 0.10625 COMBO 38 Combination -11.635 -1.378 -0.582 -0.0006 0.0618 0.1465
215 0.2125 COMBO 38 Combination -11.613 -1.378 -0.582 -0.0006 0.1236 0.2929
215 0.31875 COMBO 38 Combination -11.592 -1.378 -0.582 -0.0006 0.1854 0.4394
215 0.425 COMBO 38 Combination -11.57 -1.378 -0.582 -0.0006 0.2472 0.5858
215 0.53125 COMBO 38 Combination -11.549 -1.378 -0.582 -0.0006 0.309 0.7323
215 0.6375 COMBO 38 Combination -11.527 -1.378 -0.582 -0.0006 0.3708 0.8788
215 0.74375 COMBO 38 Combination -11.506 -1.378 -0.582 -0.0006 0.4326 1.0252
215 0.85 COMBO 38 Combination -11.484 -1.378 -0.582 -0.0006 0.4944 1.1717
215 0 COMBO 39 Combination -11.756 -1.099 -0.575 0.00061 0 0
215 0.10625 COMBO 39 Combination -11.735 -1.099 -0.575 0.00061 0.0611 0.1168
215 0.2125 COMBO 39 Combination -11.713 -1.099 -0.575 0.00061 0.1223 0.2336
215 0.31875 COMBO 39 Combination -11.692 -1.099 -0.575 0.00061 0.1834 0.3504
215 0.425 COMBO 39 Combination -11.67 -1.099 -0.575 0.00061 0.2446 0.4672
215 0.53125 COMBO 39 Combination -11.649 -1.099 -0.575 0.00061 0.3057 0.584
215 0.6375 COMBO 39 Combination -11.627 -1.099 -0.575 0.00061 0.3668 0.7009
215 0.74375 COMBO 39 Combination -11.606 -1.099 -0.575 0.00061 0.428 0.8177
215 0.85 COMBO 39 Combination -11.584 -1.099 -0.575 0.00061 0.4891 0.9345
215 0 COMBO 40 Combination -11.745 -1.107 -0.583 0.00051 0 0
215 0.10625 COMBO 40 Combination -11.724 -1.107 -0.583 0.00051 0.062 0.1176
215 0.2125 COMBO 40 Combination -11.703 -1.107 -0.583 0.00051 0.1239 0.2352
215 0.31875 COMBO 40 Combination -11.681 -1.107 -0.583 0.00051 0.1859 0.3528
215 0.425 COMBO 40 Combination -11.66 -1.107 -0.583 0.00051 0.2479 0.4703
215 0.53125 COMBO 40 Combination -11.638 -1.107 -0.583 0.00051 0.3098 0.5879
215 0.6375 COMBO 40 Combination -11.617 -1.107 -0.583 0.00051 0.3718 0.7055
215 0.74375 COMBO 40 Combination -11.595 -1.107 -0.583 0.00051 0.4337 0.8231
215 0.85 COMBO 40 Combination -11.574 -1.107 -0.583 0.00051 0.4957 0.9407
215 0 COMBO 41 Combination -11.819 -1.28 -0.629 0.00032 0 0
215 0.10625 COMBO 41 Combination -11.798 -1.28 -0.629 0.00032 0.0668 0.136

199
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
215 0.2125 COMBO 41 Combination -11.777 -1.28 -0.629 0.00032 0.1337 0.272
215 0.31875 COMBO 41 Combination -11.755 -1.28 -0.629 0.00032 0.2005 0.408
215 0.425 COMBO 41 Combination -11.734 -1.28 -0.629 0.00032 0.2673 0.544
215 0.53125 COMBO 41 Combination -11.712 -1.28 -0.629 0.00032 0.3341 0.6799
215 0.6375 COMBO 41 Combination -11.691 -1.28 -0.629 0.00032 0.401 0.8159
215 0.74375 COMBO 41 Combination -11.669 -1.28 -0.629 0.00032 0.4678 0.9519
215 0.85 COMBO 41 Combination -11.648 -1.28 -0.629 0.00032 0.5346 1.0879
215 0 COMBO 42 Combination -11.809 -1.287 -0.637 0.00023 0 0
215 0.10625 COMBO 42 Combination -11.787 -1.287 -0.637 0.00023 0.0677 0.1368
215 0.2125 COMBO 42 Combination -11.766 -1.287 -0.637 0.00023 0.1353 0.2735
215 0.31875 COMBO 42 Combination -11.744 -1.287 -0.637 0.00023 0.203 0.4103
215 0.425 COMBO 42 Combination -11.723 -1.287 -0.637 0.00023 0.2706 0.5471
215 0.53125 COMBO 42 Combination -11.702 -1.287 -0.637 0.00023 0.3383 0.6838
215 0.6375 COMBO 42 Combination -11.68 -1.287 -0.637 0.00023 0.4059 0.8206
215 0.74375 COMBO 42 Combination -11.659 -1.287 -0.637 0.00023 0.4736 0.9574
215 0.85 COMBO 42 Combination -11.637 -1.287 -0.637 0.00023 0.5412 1.0941
215 0 COMBO 43 Combination -11.782 -1.087 -0.62 0.00023 0 0
215 0.10625 COMBO 43 Combination -11.761 -1.087 -0.62 0.00023 0.0658 0.1154
215 0.2125 COMBO 43 Combination -11.739 -1.087 -0.62 0.00023 0.1317 0.2309
215 0.31875 COMBO 43 Combination -11.718 -1.087 -0.62 0.00023 0.1975 0.3463
215 0.425 COMBO 43 Combination -11.696 -1.087 -0.62 0.00023 0.2634 0.4618
215 0.53125 COMBO 43 Combination -11.675 -1.087 -0.62 0.00023 0.3292 0.5772
215 0.6375 COMBO 43 Combination -11.653 -1.087 -0.62 0.00023 0.395 0.6927
215 0.74375 COMBO 43 Combination -11.632 -1.087 -0.62 0.00023 0.4609 0.8081
215 0.85 COMBO 43 Combination -11.61 -1.087 -0.62 0.00023 0.5267 0.9236
215 0 COMBO 44 Combination -11.772 -1.094 -0.627 0.00014 0 0
215 0.10625 COMBO 44 Combination -11.75 -1.094 -0.627 0.00014 0.0667 0.1162
215 0.2125 COMBO 44 Combination -11.729 -1.094 -0.627 0.00014 0.1333 0.2325
215 0.31875 COMBO 44 Combination -11.707 -1.094 -0.627 0.00014 0.2 0.3487
215 0.425 COMBO 44 Combination -11.686 -1.094 -0.627 0.00014 0.2667 0.4649
215 0.53125 COMBO 44 Combination -11.664 -1.094 -0.627 0.00014 0.3333 0.5811
215 0.6375 COMBO 44 Combination -11.643 -1.094 -0.627 0.00014 0.4 0.6974
215 0.74375 COMBO 44 Combination -11.621 -1.094 -0.627 0.00014 0.4667 0.8136
215 0.85 COMBO 44 Combination -11.6 -1.094 -0.627 0.00014 0.5333 0.9298
215 0 COMBO 45 Combination -11.617 -1.041 -0.574 -0.0005 0 0
215 0.10625 COMBO 45 Combination -11.596 -1.041 -0.574 -0.0005 0.0609 0.1106
215 0.2125 COMBO 45 Combination -11.575 -1.041 -0.574 -0.0005 0.1219 0.2212
215 0.31875 COMBO 45 Combination -11.553 -1.041 -0.574 -0.0005 0.1828 0.3319
215 0.425 COMBO 45 Combination -11.532 -1.041 -0.574 -0.0005 0.2438 0.4425
215 0.53125 COMBO 45 Combination -11.51 -1.041 -0.574 -0.0005 0.3047 0.5531
215 0.6375 COMBO 45 Combination -11.489 -1.041 -0.574 -0.0005 0.3657 0.6637
215 0.74375 COMBO 45 Combination -11.467 -1.041 -0.574 -0.0005 0.4266 0.7744
215 0.85 COMBO 45 Combination -11.446 -1.041 -0.574 -0.0005 0.4875 0.885
215 0 COMBO 46 Combination -11.607 -1.048 -0.581 -0.0006 0 0
215 0.10625 COMBO 46 Combination -11.585 -1.048 -0.581 -0.0006 0.0618 0.1114
215 0.2125 COMBO 46 Combination -11.564 -1.048 -0.581 -0.0006 0.1235 0.2228
215 0.31875 COMBO 46 Combination -11.542 -1.048 -0.581 -0.0006 0.1853 0.3342

200
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
215 0.425 COMBO 46 Combination -11.521 -1.048 -0.581 -0.0006 0.2471 0.4456
215 0.53125 COMBO 46 Combination -11.5 -1.048 -0.581 -0.0006 0.3088 0.557
215 0.6375 COMBO 46 Combination -11.478 -1.048 -0.581 -0.0006 0.3706 0.6684
215 0.74375 COMBO 46 Combination -11.457 -1.048 -0.581 -0.0006 0.4324 0.7798
215 0.85 COMBO 46 Combination -11.435 -1.048 -0.581 -0.0006 0.4941 0.8912
215 0 COMBO 47 Combination -21.773 -3.949 -1.181 4.5E-05 0 0
215 0.10625 COMBO 47 Combination -21.751 -3.949 -1.181 4.5E-05 0.1255 0.4196
215 0.2125 COMBO 47 Combination -21.73 -3.949 -1.181 4.5E-05 0.251 0.8392
215 0.31875 COMBO 47 Combination -21.708 -3.949 -1.181 4.5E-05 0.3766 1.2588
215 0.425 COMBO 47 Combination -21.687 -3.949 -1.181 4.5E-05 0.5021 1.6783
215 0.53125 COMBO 47 Combination -21.665 -3.949 -1.181 4.5E-05 0.6276 2.0979
215 0.6375 COMBO 47 Combination -21.644 -3.949 -1.181 4.5E-05 0.7531 2.5175
215 0.74375 COMBO 47 Combination -21.622 -3.949 -1.181 4.5E-05 0.8786 2.9371
215 0.85 COMBO 47 Combination -21.601 -3.949 -1.181 4.5E-05 1.0042 3.3567
215 0 COMBO 48 Combination -21.762 -3.956 -1.189 -5E-05 0 0
215 0.10625 COMBO 48 Combination -21.74 -3.956 -1.189 -5E-05 0.1263 0.4204
215 0.2125 COMBO 48 Combination -21.719 -3.956 -1.189 -5E-05 0.2527 0.8407
215 0.31875 COMBO 48 Combination -21.698 -3.956 -1.189 -5E-05 0.379 1.2611
215 0.425 COMBO 48 Combination -21.676 -3.956 -1.189 -5E-05 0.5054 1.6815
215 0.53125 COMBO 48 Combination -21.655 -3.956 -1.189 -5E-05 0.6317 2.1018
215 0.6375 COMBO 48 Combination -21.633 -3.956 -1.189 -5E-05 0.7581 2.5222
215 0.74375 COMBO 48 Combination -21.612 -3.956 -1.189 -5E-05 0.8844 2.9426
215 0.85 COMBO 48 Combination -21.59 -3.956 -1.189 -5E-05 1.0107 3.3629
215 0 COMBO 49 Combination -21.838 -4.13 -1.236 -0.0002 0 0
215 0.10625 COMBO 49 Combination -21.816 -4.13 -1.236 -0.0002 0.1313 0.4388
215 0.2125 COMBO 49 Combination -21.795 -4.13 -1.236 -0.0002 0.2626 0.8776
215 0.31875 COMBO 49 Combination -21.773 -4.13 -1.236 -0.0002 0.3939 1.3164
215 0.425 COMBO 49 Combination -21.752 -4.13 -1.236 -0.0002 0.5251 1.7553
215 0.53125 COMBO 49 Combination -21.73 -4.13 -1.236 -0.0002 0.6564 2.1941
215 0.6375 COMBO 49 Combination -21.709 -4.13 -1.236 -0.0002 0.7877 2.6329
215 0.74375 COMBO 49 Combination -21.687 -4.13 -1.236 -0.0002 0.919 3.0717
215 0.85 COMBO 49 Combination -21.666 -4.13 -1.236 -0.0002 1.0503 3.5105
215 0 COMBO 50 Combination -21.827 -4.137 -1.243 -0.0003 0 0
215 0.10625 COMBO 50 Combination -21.805 -4.137 -1.243 -0.0003 0.1321 0.4396
215 0.2125 COMBO 50 Combination -21.784 -4.137 -1.243 -0.0003 0.2642 0.8792
215 0.31875 COMBO 50 Combination -21.763 -4.137 -1.243 -0.0003 0.3963 1.3188
215 0.425 COMBO 50 Combination -21.741 -4.137 -1.243 -0.0003 0.5284 1.7584
215 0.53125 COMBO 50 Combination -21.72 -4.137 -1.243 -0.0003 0.6606 2.198
215 0.6375 COMBO 50 Combination -21.698 -4.137 -1.243 -0.0003 0.7927 2.6375
215 0.74375 COMBO 50 Combination -21.677 -4.137 -1.243 -0.0003 0.9248 3.0771
215 0.85 COMBO 50 Combination -21.655 -4.137 -1.243 -0.0003 1.0569 3.5167
215 0 COMBO 51 Combination -21.927 -3.858 -1.237 0.00088 0 0
215 0.10625 COMBO 51 Combination -21.906 -3.858 -1.237 0.00088 0.1314 0.4099
215 0.2125 COMBO 51 Combination -21.884 -3.858 -1.237 0.00088 0.2629 0.8199
215 0.31875 COMBO 51 Combination -21.863 -3.858 -1.237 0.00088 0.3943 1.2298
215 0.425 COMBO 51 Combination -21.841 -3.858 -1.237 0.00088 0.5258 1.6398
215 0.53125 COMBO 51 Combination -21.82 -3.858 -1.237 0.00088 0.6572 2.0497

201
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
215 0.6375 COMBO 51 Combination -21.798 -3.858 -1.237 0.00088 0.7887 2.4596
215 0.74375 COMBO 51 Combination -21.777 -3.858 -1.237 0.00088 0.9201 2.8696
215 0.85 COMBO 51 Combination -21.755 -3.858 -1.237 0.00088 1.0516 3.2795
215 0 COMBO 52 Combination -21.916 -3.866 -1.245 0.00078 0 0
215 0.10625 COMBO 52 Combination -21.895 -3.866 -1.245 0.00078 0.1323 0.4107
215 0.2125 COMBO 52 Combination -21.873 -3.866 -1.245 0.00078 0.2645 0.8214
215 0.31875 COMBO 52 Combination -21.852 -3.866 -1.245 0.00078 0.3968 1.2322
215 0.425 COMBO 52 Combination -21.831 -3.866 -1.245 0.00078 0.5291 1.6429
215 0.53125 COMBO 52 Combination -21.809 -3.866 -1.245 0.00078 0.6614 2.0536
215 0.6375 COMBO 52 Combination -21.788 -3.866 -1.245 0.00078 0.7936 2.4643
215 0.74375 COMBO 52 Combination -21.766 -3.866 -1.245 0.00078 0.9259 2.875
215 0.85 COMBO 52 Combination -21.745 -3.866 -1.245 0.00078 1.0582 3.2857
215 0 COMBO 53 Combination -21.99 -4.039 -1.291 0.00059 0 0
215 0.10625 COMBO 53 Combination -21.969 -4.039 -1.291 0.00059 0.1371 0.4291
215 0.2125 COMBO 53 Combination -21.947 -4.039 -1.291 0.00059 0.2743 0.8582
215 0.31875 COMBO 53 Combination -21.926 -4.039 -1.291 0.00059 0.4114 1.2874
215 0.425 COMBO 53 Combination -21.905 -4.039 -1.291 0.00059 0.5485 1.7165
215 0.53125 COMBO 53 Combination -21.883 -4.039 -1.291 0.00059 0.6857 2.1456
215 0.6375 COMBO 53 Combination -21.862 -4.039 -1.291 0.00059 0.8228 2.5747
215 0.74375 COMBO 53 Combination -21.84 -4.039 -1.291 0.00059 0.9599 3.0038
215 0.85 COMBO 53 Combination -21.819 -4.039 -1.291 0.00059 1.0971 3.433
215 0 COMBO 54 Combination -21.98 -4.046 -1.298 0.0005 0 0
215 0.10625 COMBO 54 Combination -21.958 -4.046 -1.298 0.0005 0.138 0.4299
215 0.2125 COMBO 54 Combination -21.937 -4.046 -1.298 0.0005 0.2759 0.8598
215 0.31875 COMBO 54 Combination -21.915 -4.046 -1.298 0.0005 0.4139 1.2897
215 0.425 COMBO 54 Combination -21.894 -4.046 -1.298 0.0005 0.5518 1.7196
215 0.53125 COMBO 54 Combination -21.872 -4.046 -1.298 0.0005 0.6898 2.1495
215 0.6375 COMBO 54 Combination -21.851 -4.046 -1.298 0.0005 0.8277 2.5794
215 0.74375 COMBO 54 Combination -21.83 -4.046 -1.298 0.0005 0.9657 3.0093
215 0.85 COMBO 54 Combination -21.808 -4.046 -1.298 0.0005 1.1037 3.4392
215 0 COMBO 55 Combination -21.953 -3.845 -1.281 0.0005 0 0
215 0.10625 COMBO 55 Combination -21.932 -3.845 -1.281 0.0005 0.1361 0.4086
215 0.2125 COMBO 55 Combination -21.91 -3.845 -1.281 0.0005 0.2723 0.8172
215 0.31875 COMBO 55 Combination -21.889 -3.845 -1.281 0.0005 0.4084 1.2257
215 0.425 COMBO 55 Combination -21.867 -3.845 -1.281 0.0005 0.5446 1.6343
215 0.53125 COMBO 55 Combination -21.846 -3.845 -1.281 0.0005 0.6807 2.0429
215 0.6375 COMBO 55 Combination -21.824 -3.845 -1.281 0.0005 0.8169 2.4515
215 0.74375 COMBO 55 Combination -21.803 -3.845 -1.281 0.0005 0.953 2.8601
215 0.85 COMBO 55 Combination -21.781 -3.845 -1.281 0.0005 1.0892 3.2686
215 0 COMBO 56 Combination -21.942 -3.853 -1.289 0.00041 0 0
215 0.10625 COMBO 56 Combination -21.921 -3.853 -1.289 0.00041 0.137 0.4094
215 0.2125 COMBO 56 Combination -21.9 -3.853 -1.289 0.00041 0.2739 0.8187
215 0.31875 COMBO 56 Combination -21.878 -3.853 -1.289 0.00041 0.4109 1.2281
215 0.425 COMBO 56 Combination -21.857 -3.853 -1.289 0.00041 0.5479 1.6374
215 0.53125 COMBO 56 Combination -21.835 -3.853 -1.289 0.00041 0.6849 2.0468
215 0.6375 COMBO 56 Combination -21.814 -3.853 -1.289 0.00041 0.8218 2.4562
215 0.74375 COMBO 56 Combination -21.792 -3.853 -1.289 0.00041 0.9588 2.8655

202
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
215 0.85 COMBO 56 Combination -21.771 -3.853 -1.289 0.00041 1.0958 3.2749
215 0 COMBO 57 Combination -21.788 -3.8 -1.235 -0.0002 0 0
215 0.10625 COMBO 57 Combination -21.767 -3.8 -1.235 -0.0002 0.1313 0.4038
215 0.2125 COMBO 57 Combination -21.745 -3.8 -1.235 -0.0002 0.2625 0.8075
215 0.31875 COMBO 57 Combination -21.724 -3.8 -1.235 -0.0002 0.3938 1.2113
215 0.425 COMBO 57 Combination -21.703 -3.8 -1.235 -0.0002 0.525 1.615
215 0.53125 COMBO 57 Combination -21.681 -3.8 -1.235 -0.0002 0.6563 2.0188
215 0.6375 COMBO 57 Combination -21.66 -3.8 -1.235 -0.0002 0.7875 2.4225
215 0.74375 COMBO 57 Combination -21.638 -3.8 -1.235 -0.0002 0.9188 2.8263
215 0.85 COMBO 57 Combination -21.617 -3.8 -1.235 -0.0002 1.05 3.23
215 0 COMBO 58 Combination -21.778 -3.807 -1.243 -0.0003 0 0
215 0.10625 COMBO 58 Combination -21.756 -3.807 -1.243 -0.0003 0.1321 0.4045
215 0.2125 COMBO 58 Combination -21.735 -3.807 -1.243 -0.0003 0.2641 0.8091
215 0.31875 COMBO 58 Combination -21.713 -3.807 -1.243 -0.0003 0.3962 1.2136
215 0.425 COMBO 58 Combination -21.692 -3.807 -1.243 -0.0003 0.5283 1.6181
215 0.53125 COMBO 58 Combination -21.67 -3.807 -1.243 -0.0003 0.6604 2.0227
215 0.6375 COMBO 58 Combination -21.649 -3.807 -1.243 -0.0003 0.7924 2.4272
215 0.74375 COMBO 58 Combination -21.628 -3.807 -1.243 -0.0003 0.9245 2.8317
215 0.85 COMBO 58 Combination -21.606 -3.807 -1.243 -0.0003 1.0566 3.2363
215 0 COMBO 59 Combination -21.698 -3.856 -1.116 0.00035 0 0
215 0.10625 COMBO 59 Combination -21.677 -3.856 -1.116 0.00035 0.1186 0.4096
215 0.2125 COMBO 59 Combination -21.655 -3.856 -1.116 0.00035 0.2372 0.8193
215 0.31875 COMBO 59 Combination -21.634 -3.856 -1.116 0.00035 0.3559 1.2289
215 0.425 COMBO 59 Combination -21.612 -3.856 -1.116 0.00035 0.4745 1.6386
215 0.53125 COMBO 59 Combination -21.591 -3.856 -1.116 0.00035 0.5931 2.0482
215 0.6375 COMBO 59 Combination -21.57 -3.856 -1.116 0.00035 0.7117 2.4579
215 0.74375 COMBO 59 Combination -21.548 -3.856 -1.116 0.00035 0.8303 2.8675
215 0.85 COMBO 59 Combination -21.527 -3.856 -1.116 0.00035 0.9489 3.2772
215 0 COMBO 60 Combination -21.763 -4.036 -1.171 7.2E-05 0 0
215 0.10625 COMBO 60 Combination -21.742 -4.036 -1.171 7.2E-05 0.1244 0.4289
215 0.2125 COMBO 60 Combination -21.72 -4.036 -1.171 7.2E-05 0.2488 0.8578
215 0.31875 COMBO 60 Combination -21.699 -4.036 -1.171 7.2E-05 0.3732 1.2866
215 0.425 COMBO 60 Combination -21.678 -4.036 -1.171 7.2E-05 0.4975 1.7155
215 0.53125 COMBO 60 Combination -21.656 -4.036 -1.171 7.2E-05 0.6219 2.1444
215 0.6375 COMBO 60 Combination -21.635 -4.036 -1.171 7.2E-05 0.7463 2.5733
215 0.74375 COMBO 60 Combination -21.613 -4.036 -1.171 7.2E-05 0.8707 3.0021
215 0.85 COMBO 60 Combination -21.592 -4.036 -1.171 7.2E-05 0.9951 3.431
215 0 COMBO 61 Combination -21.853 -3.765 -1.172 0.0012 0 0
215 0.10625 COMBO 61 Combination -21.831 -3.765 -1.172 0.0012 0.1245 0.4
215 0.2125 COMBO 61 Combination -21.81 -3.765 -1.172 0.0012 0.2491 0.8
215 0.31875 COMBO 61 Combination -21.788 -3.765 -1.172 0.0012 0.3736 1.2
215 0.425 COMBO 61 Combination -21.767 -3.765 -1.172 0.0012 0.4982 1.6
215 0.53125 COMBO 61 Combination -21.746 -3.765 -1.172 0.0012 0.6227 2
215 0.6375 COMBO 61 Combination -21.724 -3.765 -1.172 0.0012 0.7473 2.4
215 0.74375 COMBO 61 Combination -21.703 -3.765 -1.172 0.0012 0.8718 2.8
215 0.85 COMBO 61 Combination -21.681 -3.765 -1.172 0.0012 0.9964 3.2
215 0 COMBO 62 Combination -21.916 -3.945 -1.226 0.0009 0 0

203
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
215 0.10625 COMBO 62 Combination -21.895 -3.945 -1.226 0.0009 0.1302 0.4192
215 0.2125 COMBO 62 Combination -21.873 -3.945 -1.226 0.0009 0.2605 0.8384
215 0.31875 COMBO 62 Combination -21.852 -3.945 -1.226 0.0009 0.3907 1.2575
215 0.425 COMBO 62 Combination -21.83 -3.945 -1.226 0.0009 0.5209 1.6767
215 0.53125 COMBO 62 Combination -21.809 -3.945 -1.226 0.0009 0.6512 2.0959
215 0.6375 COMBO 62 Combination -21.787 -3.945 -1.226 0.0009 0.7814 2.5151
215 0.74375 COMBO 62 Combination -21.766 -3.945 -1.226 0.0009 0.9116 2.9343
215 0.85 COMBO 62 Combination -21.745 -3.945 -1.226 0.0009 1.0418 3.3535
215 0 COMBO 63 Combination -21.879 -3.752 -1.216 0.00081 0 0
215 0.10625 COMBO 63 Combination -21.857 -3.752 -1.216 0.00081 0.1292 0.3986
215 0.2125 COMBO 63 Combination -21.836 -3.752 -1.216 0.00081 0.2585 0.7973
215 0.31875 COMBO 63 Combination -21.814 -3.752 -1.216 0.00081 0.3877 1.1959
215 0.425 COMBO 63 Combination -21.793 -3.752 -1.216 0.00081 0.517 1.5946
215 0.53125 COMBO 63 Combination -21.772 -3.752 -1.216 0.00081 0.6462 1.9932
215 0.6375 COMBO 63 Combination -21.75 -3.752 -1.216 0.00081 0.7755 2.3919
215 0.74375 COMBO 63 Combination -21.729 -3.752 -1.216 0.00081 0.9047 2.7905
215 0.85 COMBO 63 Combination -21.707 -3.752 -1.216 0.00081 1.034 3.1891
215 0 COMBO 64 Combination -21.714 -3.706 -1.17 0.00012 0 0
215 0.10625 COMBO 64 Combination -21.693 -3.706 -1.17 0.00012 0.1243 0.3938
215 0.2125 COMBO 64 Combination -21.671 -3.706 -1.17 0.00012 0.2487 0.7876
215 0.31875 COMBO 64 Combination -21.65 -3.706 -1.17 0.00012 0.373 1.1814
215 0.425 COMBO 64 Combination -21.628 -3.706 -1.17 0.00012 0.4974 1.5753
215 0.53125 COMBO 64 Combination -21.607 -3.706 -1.17 0.00012 0.6217 1.9691
215 0.6375 COMBO 64 Combination -21.585 -3.706 -1.17 0.00012 0.7461 2.3629
215 0.74375 COMBO 64 Combination -21.564 -3.706 -1.17 0.00012 0.8704 2.7567
215 0.85 COMBO 64 Combination -21.543 -3.706 -1.17 0.00012 0.9948 3.1505
215 0 COMBO 65 Combination -11.59 -1.194 -0.523 -0.0003 0 0
215 0.10625 COMBO 65 Combination -11.568 -1.194 -0.523 -0.0003 0.0555 0.1268
215 0.2125 COMBO 65 Combination -11.547 -1.194 -0.523 -0.0003 0.1111 0.2536
215 0.31875 COMBO 65 Combination -11.525 -1.194 -0.523 -0.0003 0.1666 0.3804
215 0.425 COMBO 65 Combination -11.504 -1.194 -0.523 -0.0003 0.2222 0.5072
215 0.53125 COMBO 65 Combination -11.482 -1.194 -0.523 -0.0003 0.2777 0.634
215 0.6375 COMBO 65 Combination -11.461 -1.194 -0.523 -0.0003 0.3333 0.7609
215 0.74375 COMBO 65 Combination -11.439 -1.194 -0.523 -0.0003 0.3888 0.8877
215 0.85 COMBO 65 Combination -11.418 -1.194 -0.523 -0.0003 0.4443 1.0145
215 0 COMBO 66 Combination -11.655 -1.374 -0.577 -0.0005 0 0
215 0.10625 COMBO 66 Combination -11.633 -1.374 -0.577 -0.0005 0.0613 0.146
215 0.2125 COMBO 66 Combination -11.612 -1.374 -0.577 -0.0005 0.1226 0.2921
215 0.31875 COMBO 66 Combination -11.59 -1.374 -0.577 -0.0005 0.1839 0.4381
215 0.425 COMBO 66 Combination -11.569 -1.374 -0.577 -0.0005 0.2452 0.5841
215 0.53125 COMBO 66 Combination -11.547 -1.374 -0.577 -0.0005 0.3065 0.7302
215 0.6375 COMBO 66 Combination -11.526 -1.374 -0.577 -0.0005 0.3679 0.8762
215 0.74375 COMBO 66 Combination -11.504 -1.374 -0.577 -0.0005 0.4292 1.0223
215 0.85 COMBO 66 Combination -11.483 -1.374 -0.577 -0.0005 0.4905 1.1683
215 0 COMBO 67 Combination -11.744 -1.103 -0.579 0.00057 0 0
215 0.10625 COMBO 67 Combination -11.723 -1.103 -0.579 0.00057 0.0615 0.1172
215 0.2125 COMBO 67 Combination -11.701 -1.103 -0.579 0.00057 0.1229 0.2343

204
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
215 0.31875 COMBO 67 Combination -11.68 -1.103 -0.579 0.00057 0.1844 0.3515
215 0.425 COMBO 67 Combination -11.658 -1.103 -0.579 0.00057 0.2459 0.4686
215 0.53125 COMBO 67 Combination -11.637 -1.103 -0.579 0.00057 0.3074 0.5858
215 0.6375 COMBO 67 Combination -11.615 -1.103 -0.579 0.00057 0.3688 0.703
215 0.74375 COMBO 67 Combination -11.594 -1.103 -0.579 0.00057 0.4303 0.8201
215 0.85 COMBO 67 Combination -11.572 -1.103 -0.579 0.00057 0.4918 0.9373
215 0 COMBO 68 Combination -11.808 -1.283 -0.632 0.00029 0 0
215 0.10625 COMBO 68 Combination -11.786 -1.283 -0.632 0.00029 0.0672 0.1363
215 0.2125 COMBO 68 Combination -11.765 -1.283 -0.632 0.00029 0.1343 0.2727
215 0.31875 COMBO 68 Combination -11.743 -1.283 -0.632 0.00029 0.2015 0.409
215 0.425 COMBO 68 Combination -11.722 -1.283 -0.632 0.00029 0.2686 0.5454
215 0.53125 COMBO 68 Combination -11.7 -1.283 -0.632 0.00029 0.3358 0.6817
215 0.6375 COMBO 68 Combination -11.679 -1.283 -0.632 0.00029 0.4029 0.8181
215 0.74375 COMBO 68 Combination -11.657 -1.283 -0.632 0.00029 0.4701 0.9544
215 0.85 COMBO 68 Combination -11.636 -1.283 -0.632 0.00029 0.5373 1.0907
215 0 COMBO 69 Combination -11.77 -1.09 -0.623 0.0002 0 0
215 0.10625 COMBO 69 Combination -11.749 -1.09 -0.623 0.0002 0.0662 0.1158
215 0.2125 COMBO 69 Combination -11.727 -1.09 -0.623 0.0002 0.1323 0.2316
215 0.31875 COMBO 69 Combination -11.706 -1.09 -0.623 0.0002 0.1985 0.3474
215 0.425 COMBO 69 Combination -11.684 -1.09 -0.623 0.0002 0.2647 0.4632
215 0.53125 COMBO 69 Combination -11.663 -1.09 -0.623 0.0002 0.3309 0.579
215 0.6375 COMBO 69 Combination -11.641 -1.09 -0.623 0.0002 0.397 0.6948
215 0.74375 COMBO 69 Combination -11.62 -1.09 -0.623 0.0002 0.4632 0.8106
215 0.85 COMBO 69 Combination -11.598 -1.09 -0.623 0.0002 0.5294 0.9264
215 0 COMBO 70 Combination -11.606 -1.044 -0.577 -0.0005 0 0
215 0.10625 COMBO 70 Combination -11.584 -1.044 -0.577 -0.0005 0.0613 0.111
215 0.2125 COMBO 70 Combination -11.563 -1.044 -0.577 -0.0005 0.1225 0.222
215 0.31875 COMBO 70 Combination -11.541 -1.044 -0.577 -0.0005 0.1838 0.3329
215 0.425 COMBO 70 Combination -11.52 -1.044 -0.577 -0.0005 0.2451 0.4439
215 0.53125 COMBO 70 Combination -11.498 -1.044 -0.577 -0.0005 0.3064 0.5549
215 0.6375 COMBO 70 Combination -11.477 -1.044 -0.577 -0.0005 0.3676 0.6659
215 0.74375 COMBO 70 Combination -11.455 -1.044 -0.577 -0.0005 0.4289 0.7768
215 0.85 COMBO 70 Combination -11.434 -1.044 -0.577 -0.0005 0.4902 0.8878
215 0 COMBO 71 Combination -11.539 -1.093 -0.452 0.00012 0 0
215 0.10625 COMBO 71 Combination -11.518 -1.093 -0.452 0.00012 0.048 0.1162
215 0.2125 COMBO 71 Combination -11.496 -1.093 -0.452 0.00012 0.096 0.2323
215 0.31875 COMBO 71 Combination -11.475 -1.093 -0.452 0.00012 0.1439 0.3485
215 0.425 COMBO 71 Combination -11.454 -1.093 -0.452 0.00012 0.1919 0.4647
215 0.53125 COMBO 71 Combination -11.432 -1.093 -0.452 0.00012 0.2399 0.5808
215 0.6375 COMBO 71 Combination -11.411 -1.093 -0.452 0.00012 0.2879 0.697
215 0.74375 COMBO 71 Combination -11.389 -1.093 -0.452 0.00012 0.3358 0.8132
215 0.85 COMBO 71 Combination -11.368 -1.093 -0.452 0.00012 0.3838 0.9293
215 0 COMBO 72 Combination -11.529 -1.101 -0.459 2.3E-05 0 0
215 0.10625 COMBO 72 Combination -11.507 -1.101 -0.459 2.3E-05 0.0488 0.1169
215 0.2125 COMBO 72 Combination -11.486 -1.101 -0.459 2.3E-05 0.0976 0.2339
215 0.31875 COMBO 72 Combination -11.464 -1.101 -0.459 2.3E-05 0.1464 0.3508
215 0.425 COMBO 72 Combination -11.443 -1.101 -0.459 2.3E-05 0.1952 0.4678

205
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
215 0.53125 COMBO 72 Combination -11.421 -1.101 -0.459 2.3E-05 0.244 0.5847
215 0.6375 COMBO 72 Combination -11.4 -1.101 -0.459 2.3E-05 0.2928 0.7017
215 0.74375 COMBO 72 Combination -11.379 -1.101 -0.459 2.3E-05 0.3416 0.8186
215 0.85 COMBO 72 Combination -11.357 -1.101 -0.459 2.3E-05 0.3904 0.9355
215 0 COMBO 73 Combination -11.604 -1.274 -0.506 -0.0002 0 0
215 0.10625 COMBO 73 Combination -11.583 -1.274 -0.506 -0.0002 0.0537 0.1354
215 0.2125 COMBO 73 Combination -11.562 -1.274 -0.506 -0.0002 0.1075 0.2708
215 0.31875 COMBO 73 Combination -11.54 -1.274 -0.506 -0.0002 0.1612 0.4062
215 0.425 COMBO 73 Combination -11.519 -1.274 -0.506 -0.0002 0.215 0.5416
215 0.53125 COMBO 73 Combination -11.497 -1.274 -0.506 -0.0002 0.2687 0.677
215 0.6375 COMBO 73 Combination -11.476 -1.274 -0.506 -0.0002 0.3225 0.8123
215 0.74375 COMBO 73 Combination -11.454 -1.274 -0.506 -0.0002 0.3762 0.9477
215 0.85 COMBO 73 Combination -11.433 -1.274 -0.506 -0.0002 0.43 1.0831
215 0 COMBO 74 Combination -11.594 -1.282 -0.514 -0.0003 0 0
215 0.10625 COMBO 74 Combination -11.572 -1.282 -0.514 -0.0003 0.0546 0.1362
215 0.2125 COMBO 74 Combination -11.551 -1.282 -0.514 -0.0003 0.1091 0.2723
215 0.31875 COMBO 74 Combination -11.529 -1.282 -0.514 -0.0003 0.1637 0.4085
215 0.425 COMBO 74 Combination -11.508 -1.282 -0.514 -0.0003 0.2183 0.5447
215 0.53125 COMBO 74 Combination -11.487 -1.282 -0.514 -0.0003 0.2728 0.6808
215 0.6375 COMBO 74 Combination -11.465 -1.282 -0.514 -0.0003 0.3274 0.817
215 0.74375 COMBO 74 Combination -11.444 -1.282 -0.514 -0.0003 0.382 0.9532
215 0.85 COMBO 74 Combination -11.422 -1.282 -0.514 -0.0003 0.4366 1.0894
215 0 COMBO 75 Combination -11.694 -1.003 -0.507 0.00095 0 0
215 0.10625 COMBO 75 Combination -11.672 -1.003 -0.507 0.00095 0.0539 0.1065
215 0.2125 COMBO 75 Combination -11.651 -1.003 -0.507 0.00095 0.1078 0.213
215 0.31875 COMBO 75 Combination -11.63 -1.003 -0.507 0.00095 0.1617 0.3196
215 0.425 COMBO 75 Combination -11.608 -1.003 -0.507 0.00095 0.2156 0.4261
215 0.53125 COMBO 75 Combination -11.587 -1.003 -0.507 0.00095 0.2695 0.5326
215 0.6375 COMBO 75 Combination -11.565 -1.003 -0.507 0.00095 0.3234 0.6391
215 0.74375 COMBO 75 Combination -11.544 -1.003 -0.507 0.00095 0.3773 0.7456
215 0.85 COMBO 75 Combination -11.522 -1.003 -0.507 0.00095 0.4312 0.8521
215 0 COMBO 76 Combination -11.683 -1.01 -0.515 0.00085 0 0
215 0.10625 COMBO 76 Combination -11.662 -1.01 -0.515 0.00085 0.0547 0.1073
215 0.2125 COMBO 76 Combination -11.64 -1.01 -0.515 0.00085 0.1095 0.2146
215 0.31875 COMBO 76 Combination -11.619 -1.01 -0.515 0.00085 0.1642 0.3219
215 0.425 COMBO 76 Combination -11.597 -1.01 -0.515 0.00085 0.2189 0.4292
215 0.53125 COMBO 76 Combination -11.576 -1.01 -0.515 0.00085 0.2737 0.5365
215 0.6375 COMBO 76 Combination -11.555 -1.01 -0.515 0.00085 0.3284 0.6438
215 0.74375 COMBO 76 Combination -11.533 -1.01 -0.515 0.00085 0.3831 0.7511
215 0.85 COMBO 76 Combination -11.512 -1.01 -0.515 0.00085 0.4378 0.8584
215 0 COMBO 77 Combination -11.757 -1.183 -0.561 0.00067 0 0
215 0.10625 COMBO 77 Combination -11.736 -1.183 -0.561 0.00067 0.0596 0.1257
215 0.2125 COMBO 77 Combination -11.714 -1.183 -0.561 0.00067 0.1192 0.2514
215 0.31875 COMBO 77 Combination -11.693 -1.183 -0.561 0.00067 0.1788 0.3771
215 0.425 COMBO 77 Combination -11.671 -1.183 -0.561 0.00067 0.2384 0.5028
215 0.53125 COMBO 77 Combination -11.65 -1.183 -0.561 0.00067 0.298 0.6285
215 0.6375 COMBO 77 Combination -11.628 -1.183 -0.561 0.00067 0.3576 0.7542

206
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
215 0.74375 COMBO 77 Combination -11.607 -1.183 -0.561 0.00067 0.4171 0.8799
215 0.85 COMBO 77 Combination -11.586 -1.183 -0.561 0.00067 0.4767 1.0056
215 0 COMBO 78 Combination -11.747 -1.19 -0.569 0.00057 0 0
215 0.10625 COMBO 78 Combination -11.725 -1.19 -0.569 0.00057 0.0604 0.1265
215 0.2125 COMBO 78 Combination -11.704 -1.19 -0.569 0.00057 0.1208 0.2529
215 0.31875 COMBO 78 Combination -11.682 -1.19 -0.569 0.00057 0.1813 0.3794
215 0.425 COMBO 78 Combination -11.661 -1.19 -0.569 0.00057 0.2417 0.5059
215 0.53125 COMBO 78 Combination -11.639 -1.19 -0.569 0.00057 0.3021 0.6324
215 0.6375 COMBO 78 Combination -11.618 -1.19 -0.569 0.00057 0.3625 0.7588
215 0.74375 COMBO 78 Combination -11.596 -1.19 -0.569 0.00057 0.4229 0.8853
215 0.85 COMBO 78 Combination -11.575 -1.19 -0.569 0.00057 0.4833 1.0118
215 0 COMBO 79 Combination -11.72 -0.99 -0.552 0.00057 0 0
215 0.10625 COMBO 79 Combination -11.698 -0.99 -0.552 0.00057 0.0586 0.1052
215 0.2125 COMBO 79 Combination -11.677 -0.99 -0.552 0.00057 0.1172 0.2103
215 0.31875 COMBO 79 Combination -11.656 -0.99 -0.552 0.00057 0.1758 0.3155
215 0.425 COMBO 79 Combination -11.634 -0.99 -0.552 0.00057 0.2344 0.4206
215 0.53125 COMBO 79 Combination -11.613 -0.99 -0.552 0.00057 0.293 0.5258
215 0.6375 COMBO 79 Combination -11.591 -0.99 -0.552 0.00057 0.3516 0.6309
215 0.74375 COMBO 79 Combination -11.57 -0.99 -0.552 0.00057 0.4103 0.7361
215 0.85 COMBO 79 Combination -11.548 -0.99 -0.552 0.00057 0.4689 0.8413
215 0 COMBO 80 Combination -11.709 -0.997 -0.559 0.00048 0 0
215 0.10625 COMBO 80 Combination -11.688 -0.997 -0.559 0.00048 0.0594 0.1059
215 0.2125 COMBO 80 Combination -11.666 -0.997 -0.559 0.00048 0.1189 0.2119
215 0.31875 COMBO 80 Combination -11.645 -0.997 -0.559 0.00048 0.1783 0.3178
215 0.425 COMBO 80 Combination -11.623 -0.997 -0.559 0.00048 0.2377 0.4237
215 0.53125 COMBO 80 Combination -11.602 -0.997 -0.559 0.00048 0.2972 0.5297
215 0.6375 COMBO 80 Combination -11.581 -0.997 -0.559 0.00048 0.3566 0.6356
215 0.74375 COMBO 80 Combination -11.559 -0.997 -0.559 0.00048 0.416 0.7416
215 0.85 COMBO 80 Combination -11.538 -0.997 -0.559 0.00048 0.4755 0.8475
215 0 COMBO 81 Combination -11.555 -0.944 -0.506 -0.0001 0 0
215 0.10625 COMBO 81 Combination -11.534 -0.944 -0.506 -0.0001 0.0537 0.1003
215 0.2125 COMBO 81 Combination -11.512 -0.944 -0.506 -0.0001 0.1074 0.2007
215 0.31875 COMBO 81 Combination -11.491 -0.944 -0.506 -0.0001 0.1611 0.301
215 0.425 COMBO 81 Combination -11.469 -0.944 -0.506 -0.0001 0.2148 0.4013
215 0.53125 COMBO 81 Combination -11.448 -0.944 -0.506 -0.0001 0.2685 0.5017
215 0.6375 COMBO 81 Combination -11.427 -0.944 -0.506 -0.0001 0.3223 0.602
215 0.74375 COMBO 81 Combination -11.405 -0.944 -0.506 -0.0001 0.376 0.7023
215 0.85 COMBO 81 Combination -11.384 -0.944 -0.506 -0.0001 0.4297 0.8026
215 0 COMBO 82 Combination -11.545 -0.952 -0.513 -0.0002 0 0
215 0.10625 COMBO 82 Combination -11.523 -0.952 -0.513 -0.0002 0.0545 0.1011
215 0.2125 COMBO 82 Combination -11.502 -0.952 -0.513 -0.0002 0.1091 0.2022
215 0.31875 COMBO 82 Combination -11.48 -0.952 -0.513 -0.0002 0.1636 0.3033
215 0.425 COMBO 82 Combination -11.459 -0.952 -0.513 -0.0002 0.2181 0.4044
215 0.53125 COMBO 82 Combination -11.437 -0.952 -0.513 -0.0002 0.2727 0.5055
215 0.6375 COMBO 82 Combination -11.416 -0.952 -0.513 -0.0002 0.3272 0.6067
215 0.74375 COMBO 82 Combination -11.394 -0.952 -0.513 -0.0002 0.3817 0.7078
215 0.85 COMBO 82 Combination -11.373 -0.952 -0.513 -0.0002 0.4363 0.8089

207
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
215 0 COMBO 83 Combination -21.71 -3.852 -1.113 0.00039 0 0
215 0.10625 COMBO 83 Combination -21.689 -3.852 -1.113 0.00039 0.1183 0.4093
215 0.2125 COMBO 83 Combination -21.667 -3.852 -1.113 0.00039 0.2366 0.8186
215 0.31875 COMBO 83 Combination -21.646 -3.852 -1.113 0.00039 0.3549 1.2279
215 0.425 COMBO 83 Combination -21.624 -3.852 -1.113 0.00039 0.4731 1.6372
215 0.53125 COMBO 83 Combination -21.603 -3.852 -1.113 0.00039 0.5914 2.0465
215 0.6375 COMBO 83 Combination -21.582 -3.852 -1.113 0.00039 0.7097 2.4558
215 0.74375 COMBO 83 Combination -21.56 -3.852 -1.113 0.00039 0.828 2.8651
215 0.85 COMBO 83 Combination -21.539 -3.852 -1.113 0.00039 0.9463 3.2744
215 0 COMBO 84 Combination -21.7 -3.86 -1.121 0.00029 0 0
215 0.10625 COMBO 84 Combination -21.678 -3.86 -1.121 0.00029 0.1191 0.4101
215 0.2125 COMBO 84 Combination -21.657 -3.86 -1.121 0.00029 0.2382 0.8201
215 0.31875 COMBO 84 Combination -21.635 -3.86 -1.121 0.00029 0.3573 1.2302
215 0.425 COMBO 84 Combination -21.614 -3.86 -1.121 0.00029 0.4764 1.6403
215 0.53125 COMBO 84 Combination -21.592 -3.86 -1.121 0.00029 0.5956 2.0504
215 0.6375 COMBO 84 Combination -21.571 -3.86 -1.121 0.00029 0.7147 2.4604
215 0.74375 COMBO 84 Combination -21.549 -3.86 -1.121 0.00029 0.8338 2.8705
215 0.85 COMBO 84 Combination -21.528 -3.86 -1.121 0.00029 0.9529 3.2806
215 0 COMBO 85 Combination -21.775 -4.033 -1.168 0.00011 0 0
215 0.10625 COMBO 85 Combination -21.754 -4.033 -1.168 0.00011 0.1241 0.4285
215 0.2125 COMBO 85 Combination -21.732 -4.033 -1.168 0.00011 0.2481 0.857
215 0.31875 COMBO 85 Combination -21.711 -4.033 -1.168 0.00011 0.3722 1.2856
215 0.425 COMBO 85 Combination -21.69 -4.033 -1.168 0.00011 0.4962 1.7141
215 0.53125 COMBO 85 Combination -21.668 -4.033 -1.168 0.00011 0.6203 2.1426
215 0.6375 COMBO 85 Combination -21.647 -4.033 -1.168 0.00011 0.7443 2.5711
215 0.74375 COMBO 85 Combination -21.625 -4.033 -1.168 0.00011 0.8684 2.9997
215 0.85 COMBO 85 Combination -21.604 -4.033 -1.168 0.00011 0.9924 3.4282
215 0 COMBO 86 Combination -21.765 -4.04 -1.175 1.3E-05 0 0
215 0.10625 COMBO 86 Combination -21.743 -4.04 -1.175 1.3E-05 0.1249 0.4293
215 0.2125 COMBO 86 Combination -21.722 -4.04 -1.175 1.3E-05 0.2498 0.8586
215 0.31875 COMBO 86 Combination -21.7 -4.04 -1.175 1.3E-05 0.3746 1.2879
215 0.425 COMBO 86 Combination -21.679 -4.04 -1.175 1.3E-05 0.4995 1.7172
215 0.53125 COMBO 86 Combination -21.657 -4.04 -1.175 1.3E-05 0.6244 2.1465
215 0.6375 COMBO 86 Combination -21.636 -4.04 -1.175 1.3E-05 0.7493 2.5758
215 0.74375 COMBO 86 Combination -21.615 -4.04 -1.175 1.3E-05 0.8741 3.0051
215 0.85 COMBO 86 Combination -21.593 -4.04 -1.175 1.3E-05 0.999 3.4344
215 0 COMBO 87 Combination -21.865 -3.761 -1.169 0.0012 0 0
215 0.10625 COMBO 87 Combination -21.843 -3.761 -1.169 0.0012 0.1242 0.3996
215 0.2125 COMBO 87 Combination -21.822 -3.761 -1.169 0.0012 0.2484 0.7993
215 0.31875 COMBO 87 Combination -21.8 -3.761 -1.169 0.0012 0.3726 1.1989
215 0.425 COMBO 87 Combination -21.779 -3.761 -1.169 0.0012 0.4969 1.5986
215 0.53125 COMBO 87 Combination -21.757 -3.761 -1.169 0.0012 0.6211 1.9982
215 0.6375 COMBO 87 Combination -21.736 -3.761 -1.169 0.0012 0.7453 2.3979
215 0.74375 COMBO 87 Combination -21.715 -3.761 -1.169 0.0012 0.8695 2.7975
215 0.85 COMBO 87 Combination -21.693 -3.761 -1.169 0.0012 0.9937 3.1972
215 0 COMBO 88 Combination -21.854 -3.769 -1.177 0.0011 0 0
215 0.10625 COMBO 88 Combination -21.833 -3.769 -1.177 0.0011 0.125 0.4004

208
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
215 0.2125 COMBO 88 Combination -21.811 -3.769 -1.177 0.0011 0.2501 0.8009
215 0.31875 COMBO 88 Combination -21.79 -3.769 -1.177 0.0011 0.3751 1.2013
215 0.425 COMBO 88 Combination -21.768 -3.769 -1.177 0.0011 0.5002 1.6017
215 0.53125 COMBO 88 Combination -21.747 -3.769 -1.177 0.0011 0.6252 2.0021
215 0.6375 COMBO 88 Combination -21.725 -3.769 -1.177 0.0011 0.7502 2.4026
215 0.74375 COMBO 88 Combination -21.704 -3.769 -1.177 0.0011 0.8753 2.803
215 0.85 COMBO 88 Combination -21.682 -3.769 -1.177 0.0011 1.0003 3.2034
215 0 COMBO 89 Combination -21.928 -3.942 -1.223 0.00093 0 0
215 0.10625 COMBO 89 Combination -21.907 -3.942 -1.223 0.00093 0.1299 0.4188
215 0.2125 COMBO 89 Combination -21.885 -3.942 -1.223 0.00093 0.2598 0.8377
215 0.31875 COMBO 89 Combination -21.864 -3.942 -1.223 0.00093 0.3897 1.2565
215 0.425 COMBO 89 Combination -21.842 -3.942 -1.223 0.00093 0.5196 1.6753
215 0.53125 COMBO 89 Combination -21.821 -3.942 -1.223 0.00093 0.6495 2.0941
215 0.6375 COMBO 89 Combination -21.799 -3.942 -1.223 0.00093 0.7794 2.513
215 0.74375 COMBO 89 Combination -21.778 -3.942 -1.223 0.00093 0.9093 2.9318
215 0.85 COMBO 89 Combination -21.756 -3.942 -1.223 0.00093 1.0392 3.3506
215 0 COMBO 90 Combination -21.918 -3.949 -1.23 0.00084 0 0
215 0.10625 COMBO 90 Combination -21.896 -3.949 -1.23 0.00084 0.1307 0.4196
215 0.2125 COMBO 90 Combination -21.875 -3.949 -1.23 0.00084 0.2614 0.8392
215 0.31875 COMBO 90 Combination -21.853 -3.949 -1.23 0.00084 0.3922 1.2588
215 0.425 COMBO 90 Combination -21.832 -3.949 -1.23 0.00084 0.5229 1.6784
215 0.53125 COMBO 90 Combination -21.81 -3.949 -1.23 0.00084 0.6536 2.098
215 0.6375 COMBO 90 Combination -21.789 -3.949 -1.23 0.00084 0.7843 2.5176
215 0.74375 COMBO 90 Combination -21.767 -3.949 -1.23 0.00084 0.9151 2.9372
215 0.85 COMBO 90 Combination -21.746 -3.949 -1.23 0.00084 1.0458 3.3568
215 0 COMBO 91 Combination -21.891 -3.749 -1.213 0.00084 0 0
215 0.10625 COMBO 91 Combination -21.869 -3.749 -1.213 0.00084 0.1289 0.3983
215 0.2125 COMBO 91 Combination -21.848 -3.749 -1.213 0.00084 0.2578 0.7966
215 0.31875 COMBO 91 Combination -21.826 -3.749 -1.213 0.00084 0.3867 1.1949
215 0.425 COMBO 91 Combination -21.805 -3.749 -1.213 0.00084 0.5157 1.5932
215 0.53125 COMBO 91 Combination -21.784 -3.749 -1.213 0.00084 0.6446 1.9914
215 0.6375 COMBO 91 Combination -21.762 -3.749 -1.213 0.00084 0.7735 2.3897
215 0.74375 COMBO 91 Combination -21.741 -3.749 -1.213 0.00084 0.9024 2.788
215 0.85 COMBO 91 Combination -21.719 -3.749 -1.213 0.00084 1.0313 3.1863
215 0 COMBO 92 Combination -21.88 -3.756 -1.221 0.00075 0 0
215 0.10625 COMBO 92 Combination -21.859 -3.756 -1.221 0.00075 0.1297 0.3991
215 0.2125 COMBO 92 Combination -21.837 -3.756 -1.221 0.00075 0.2595 0.7981
215 0.31875 COMBO 92 Combination -21.816 -3.756 -1.221 0.00075 0.3892 1.1972
215 0.425 COMBO 92 Combination -21.794 -3.756 -1.221 0.00075 0.519 1.5963
215 0.53125 COMBO 92 Combination -21.773 -3.756 -1.221 0.00075 0.6487 1.9953
215 0.6375 COMBO 92 Combination -21.751 -3.756 -1.221 0.00075 0.7784 2.3944
215 0.74375 COMBO 92 Combination -21.73 -3.756 -1.221 0.00075 0.9082 2.7935
215 0.85 COMBO 92 Combination -21.709 -3.756 -1.221 0.00075 1.0379 3.1925
215 0 COMBO 93 Combination -21.726 -3.703 -1.167 0.00015 0 0
215 0.10625 COMBO 93 Combination -21.705 -3.703 -1.167 0.00015 0.124 0.3935
215 0.2125 COMBO 93 Combination -21.683 -3.703 -1.167 0.00015 0.248 0.7869
215 0.31875 COMBO 93 Combination -21.662 -3.703 -1.167 0.00015 0.3721 1.1804

209
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
215 0.425 COMBO 93 Combination -21.64 -3.703 -1.167 0.00015 0.4961 1.5738
215 0.53125 COMBO 93 Combination -21.619 -3.703 -1.167 0.00015 0.6201 1.9673
215 0.6375 COMBO 93 Combination -21.597 -3.703 -1.167 0.00015 0.7441 2.3608
215 0.74375 COMBO 93 Combination -21.576 -3.703 -1.167 0.00015 0.8681 2.7542
215 0.85 COMBO 93 Combination -21.555 -3.703 -1.167 0.00015 0.9921 3.1477
215 0 COMBO 94 Combination -21.716 -3.71 -1.175 5.8E-05 0 0
215 0.10625 COMBO 94 Combination -21.694 -3.71 -1.175 5.8E-05 0.1248 0.3942
215 0.2125 COMBO 94 Combination -21.673 -3.71 -1.175 5.8E-05 0.2497 0.7885
215 0.31875 COMBO 94 Combination -21.651 -3.71 -1.175 5.8E-05 0.3745 1.1827
215 0.425 COMBO 94 Combination -21.63 -3.71 -1.175 5.8E-05 0.4994 1.577
215 0.53125 COMBO 94 Combination -21.608 -3.71 -1.175 5.8E-05 0.6242 1.9712
215 0.6375 COMBO 94 Combination -21.587 -3.71 -1.175 5.8E-05 0.7491 2.3654
215 0.74375 COMBO 94 Combination -21.565 -3.71 -1.175 5.8E-05 0.8739 2.7597
215 0.85 COMBO 94 Combination -21.544 -3.71 -1.175 5.8E-05 0.9987 3.1539
215 0 COMBO 95 Combination -11.747 -1.327 1.947 -0.0006 0 0
215 0.10625 COMBO 95 Combination -11.726 -1.327 1.947 -0.0006 -0.2068 0.141
215 0.2125 COMBO 95 Combination -11.704 -1.327 1.947 -0.0006 -0.4136 0.282
215 0.31875 COMBO 95 Combination -11.683 -1.327 1.947 -0.0006 -0.6205 0.4231
215 0.425 COMBO 95 Combination -11.661 -1.327 1.947 -0.0006 -0.8273 0.5641
215 0.53125 COMBO 95 Combination -11.64 -1.327 1.947 -0.0006 -1.0341 0.7051
215 0.6375 COMBO 95 Combination -11.618 -1.327 1.947 -0.0006 -1.2409 0.8461
215 0.74375 COMBO 95 Combination -11.597 -1.327 1.947 -0.0006 -1.4478 0.9872
215 0.85 COMBO 95 Combination -11.575 -1.327 1.947 -0.0006 -1.6546 1.1282
215 0 COMBO 96 Combination -11.736 -1.335 1.939 -0.0007 0 0
215 0.10625 COMBO 96 Combination -11.715 -1.335 1.939 -0.0007 -0.206 0.1418
215 0.2125 COMBO 96 Combination -11.694 -1.335 1.939 -0.0007 -0.412 0.2836
215 0.31875 COMBO 96 Combination -11.672 -1.335 1.939 -0.0007 -0.618 0.4254
215 0.425 COMBO 96 Combination -11.651 -1.335 1.939 -0.0007 -0.824 0.5672
215 0.53125 COMBO 96 Combination -11.629 -1.335 1.939 -0.0007 -1.03 0.709
215 0.6375 COMBO 96 Combination -11.608 -1.335 1.939 -0.0007 -1.236 0.8508
215 0.74375 COMBO 96 Combination -11.586 -1.335 1.939 -0.0007 -1.442 0.9926
215 0.85 COMBO 96 Combination -11.565 -1.335 1.939 -0.0007 -1.648 1.1344
215 0 COMBO 97 Combination -10.422 0.058 -0.573 -0.0003 0 0
215 0.10625 COMBO 97 Combination -10.401 0.058 -0.573 -0.0003 0.0608 -0.0062
215 0.2125 COMBO 97 Combination -10.379 0.058 -0.573 -0.0003 0.1217 -0.0124
215 0.31875 COMBO 97 Combination -10.358 0.058 -0.573 -0.0003 0.1825 -0.0186
215 0.425 COMBO 97 Combination -10.336 0.058 -0.573 -0.0003 0.2434 -0.0247
215 0.53125 COMBO 97 Combination -10.315 0.058 -0.573 -0.0003 0.3042 -0.0309
215 0.6375 COMBO 97 Combination -10.293 0.058 -0.573 -0.0003 0.365 -0.0371
215 0.74375 COMBO 97 Combination -10.272 0.058 -0.573 -0.0003 0.4259 -0.0433
215 0.85 COMBO 97 Combination -10.251 0.058 -0.573 -0.0003 0.4867 -0.0495
215 0 COMBO 98 Combination -10.412 0.051 -0.58 -0.0004 0 0
215 0.10625 COMBO 98 Combination -10.39 0.051 -0.58 -0.0004 0.0617 -0.0054
215 0.2125 COMBO 98 Combination -10.369 0.051 -0.58 -0.0004 0.1233 -0.0108
215 0.31875 COMBO 98 Combination -10.347 0.051 -0.58 -0.0004 0.185 -0.0162
215 0.425 COMBO 98 Combination -10.326 0.051 -0.58 -0.0004 0.2467 -0.0216
215 0.53125 COMBO 98 Combination -10.304 0.051 -0.58 -0.0004 0.3083 -0.027

210
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
215 0.6375 COMBO 98 Combination -10.283 0.051 -0.58 -0.0004 0.37 -0.0324
215 0.74375 COMBO 98 Combination -10.261 0.051 -0.58 -0.0004 0.4316 -0.0378
215 0.85 COMBO 98 Combination -10.24 0.051 -0.58 -0.0004 0.4933 -0.0433
215 0 COMBO 99 Combination -21.906 -4.089 1.282 -0.0004 0 0
215 0.10625 COMBO 99 Combination -21.885 -4.089 1.282 -0.0004 -0.1362 0.4345
215 0.2125 COMBO 99 Combination -21.863 -4.089 1.282 -0.0004 -0.2724 0.869
215 0.31875 COMBO 99 Combination -21.842 -4.089 1.282 -0.0004 -0.4086 1.3035
215 0.425 COMBO 99 Combination -21.82 -4.089 1.282 -0.0004 -0.5447 1.738
215 0.53125 COMBO 99 Combination -21.799 -4.089 1.282 -0.0004 -0.6809 2.1725
215 0.6375 COMBO 99 Combination -21.777 -4.089 1.282 -0.0004 -0.8171 2.6071
215 0.74375 COMBO 99 Combination -21.756 -4.089 1.282 -0.0004 -0.9533 3.0416
215 0.85 COMBO 99 Combination -21.734 -4.089 1.282 -0.0004 -1.0895 3.4761
215 0 COMBO 100 Combination -20.581 -2.704 -1.237 -8E-05 0 0
215 0.10625 COMBO 100 Combination -20.56 -2.704 -1.237 -8E-05 0.1315 0.2873
215 0.2125 COMBO 100 Combination -20.538 -2.704 -1.237 -8E-05 0.263 0.5746
215 0.31875 COMBO 100 Combination -20.517 -2.704 -1.237 -8E-05 0.3944 0.8619
215 0.425 COMBO 100 Combination -20.495 -2.704 -1.237 -8E-05 0.5259 1.1492
215 0.53125 COMBO 100 Combination -20.474 -2.704 -1.237 -8E-05 0.6574 1.4365
215 0.6375 COMBO 100 Combination -20.452 -2.704 -1.237 -8E-05 0.7889 1.7238
215 0.74375 COMBO 100 Combination -20.431 -2.704 -1.237 -8E-05 0.9203 2.0111
215 0.85 COMBO 100 Combination -20.409 -2.704 -1.237 -8E-05 1.0518 2.2984
215 0 COMBO 101 Combination -21.918 -4.086 1.285 -0.0004 0 0
215 0.10625 COMBO 101 Combination -21.896 -4.086 1.285 -0.0004 -0.1365 0.4342
215 0.2125 COMBO 101 Combination -21.875 -4.086 1.285 -0.0004 -0.273 0.8683
215 0.31875 COMBO 101 Combination -21.854 -4.086 1.285 -0.0004 -0.4095 1.3025
215 0.425 COMBO 101 Combination -21.832 -4.086 1.285 -0.0004 -0.5461 1.7366
215 0.53125 COMBO 101 Combination -21.811 -4.086 1.285 -0.0004 -0.6826 2.1708
215 0.6375 COMBO 101 Combination -21.789 -4.086 1.285 -0.0004 -0.8191 2.6049
215 0.74375 COMBO 101 Combination -21.768 -4.086 1.285 -0.0004 -0.9556 3.0391
215 0.85 COMBO 101 Combination -21.746 -4.086 1.285 -0.0004 -1.0921 3.4732
215 0 COMBO 102 Combination -21.907 -4.093 1.277 -0.0005 0 0
215 0.10625 COMBO 102 Combination -21.886 -4.093 1.277 -0.0005 -0.1357 0.4349
215 0.2125 COMBO 102 Combination -21.864 -4.093 1.277 -0.0005 -0.2714 0.8699
215 0.31875 COMBO 102 Combination -21.843 -4.093 1.277 -0.0005 -0.4071 1.3048
215 0.425 COMBO 102 Combination -21.821 -4.093 1.277 -0.0005 -0.5428 1.7397
215 0.53125 COMBO 102 Combination -21.8 -4.093 1.277 -0.0005 -0.6784 2.1747
215 0.6375 COMBO 102 Combination -21.779 -4.093 1.277 -0.0005 -0.8141 2.6096
215 0.74375 COMBO 102 Combination -21.757 -4.093 1.277 -0.0005 -0.9498 3.0445
215 0.85 COMBO 102 Combination -21.736 -4.093 1.277 -0.0005 -1.0855 3.4795
215 0 COMBO 103 Combination -20.593 -2.701 -1.234 -4E-05 0 0
215 0.10625 COMBO 103 Combination -20.572 -2.701 -1.234 -4E-05 0.1311 0.2869
215 0.2125 COMBO 103 Combination -20.55 -2.701 -1.234 -4E-05 0.2623 0.5739
215 0.31875 COMBO 103 Combination -20.529 -2.701 -1.234 -4E-05 0.3934 0.8608
215 0.425 COMBO 103 Combination -20.507 -2.701 -1.234 -4E-05 0.5246 1.1478
215 0.53125 COMBO 103 Combination -20.486 -2.701 -1.234 -4E-05 0.6557 1.4347
215 0.6375 COMBO 103 Combination -20.464 -2.701 -1.234 -4E-05 0.7869 1.7217
215 0.74375 COMBO 103 Combination -20.443 -2.701 -1.234 -4E-05 0.918 2.0086

211
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
215 0.85 COMBO 103 Combination -20.421 -2.701 -1.234 -4E-05 1.0492 2.2956
215 0 COMBO 104 Combination -20.582 -2.708 -1.242 -0.0001 0 0
215 0.10625 COMBO 104 Combination -20.561 -2.708 -1.242 -0.0001 0.132 0.2877
215 0.2125 COMBO 104 Combination -20.54 -2.708 -1.242 -0.0001 0.2639 0.5754
215 0.31875 COMBO 104 Combination -20.518 -2.708 -1.242 -0.0001 0.3959 0.8632
215 0.425 COMBO 104 Combination -20.497 -2.708 -1.242 -0.0001 0.5279 1.1509
215 0.53125 COMBO 104 Combination -20.475 -2.708 -1.242 -0.0001 0.6599 1.4386
215 0.6375 COMBO 104 Combination -20.454 -2.708 -1.242 -0.0001 0.7918 1.7263
215 0.74375 COMBO 104 Combination -20.432 -2.708 -1.242 -0.0001 0.9238 2.0141
215 0.85 COMBO 104 Combination -20.411 -2.708 -1.242 -0.0001 1.0558 2.3018
215 0 COMBO 105 Combination -6.762 -0.501 -0.157 0.00023 0 0
215 0.10625 COMBO 105 Combination -6.749 -0.501 -0.157 0.00023 0.0167 0.0532
215 0.2125 COMBO 105 Combination -6.736 -0.501 -0.157 0.00023 0.0334 0.1064
215 0.31875 COMBO 105 Combination -6.723 -0.501 -0.157 0.00023 0.0502 0.1596
215 0.425 COMBO 105 Combination -6.71 -0.501 -0.157 0.00023 0.0669 0.2128
215 0.53125 COMBO 105 Combination -6.698 -0.501 -0.157 0.00023 0.0836 0.266
215 0.6375 COMBO 105 Combination -6.685 -0.501 -0.157 0.00023 0.1003 0.3192
215 0.74375 COMBO 105 Combination -6.672 -0.501 -0.157 0.00023 0.1171 0.3724
215 0.85 COMBO 105 Combination -6.659 -0.501 -0.157 0.00023 0.1338 0.4256
215 0 COMBO 106 Combination -6.849 -0.742 -0.23 -0.0001 0 0
215 0.10625 COMBO 106 Combination -6.836 -0.742 -0.23 -0.0001 0.0244 0.0788
215 0.2125 COMBO 106 Combination -6.823 -0.742 -0.23 -0.0001 0.0488 0.1577
215 0.31875 COMBO 106 Combination -6.81 -0.742 -0.23 -0.0001 0.0732 0.2365
215 0.425 COMBO 106 Combination -6.797 -0.742 -0.23 -0.0001 0.0976 0.3154
215 0.53125 COMBO 106 Combination -6.784 -0.742 -0.23 -0.0001 0.1221 0.3942
215 0.6375 COMBO 106 Combination -6.771 -0.742 -0.23 -0.0001 0.1465 0.473
215 0.74375 COMBO 106 Combination -6.759 -0.742 -0.23 -0.0001 0.1709 0.5519
215 0.85 COMBO 106 Combination -6.746 -0.742 -0.23 -0.0001 0.1953 0.6307
215 0 COMBO 107 Combination -6.968 -0.38 -0.232 0.0013 0 0
215 0.10625 COMBO 107 Combination -6.955 -0.38 -0.232 0.0013 0.0246 0.0403
215 0.2125 COMBO 107 Combination -6.942 -0.38 -0.232 0.0013 0.0493 0.0807
215 0.31875 COMBO 107 Combination -6.929 -0.38 -0.232 0.0013 0.0739 0.121
215 0.425 COMBO 107 Combination -6.916 -0.38 -0.232 0.0013 0.0985 0.1614
215 0.53125 COMBO 107 Combination -6.904 -0.38 -0.232 0.0013 0.1231 0.2017
215 0.6375 COMBO 107 Combination -6.891 -0.38 -0.232 0.0013 0.1478 0.242
215 0.74375 COMBO 107 Combination -6.878 -0.38 -0.232 0.0013 0.1724 0.2824
215 0.85 COMBO 107 Combination -6.865 -0.38 -0.232 0.0013 0.197 0.3227
215 0 COMBO 108 Combination -7.052 -0.62 -0.303 0.00096 0 0
215 0.10625 COMBO 108 Combination -7.04 -0.62 -0.303 0.00096 0.0322 0.0659
215 0.2125 COMBO 108 Combination -7.027 -0.62 -0.303 0.00096 0.0644 0.1318
215 0.31875 COMBO 108 Combination -7.014 -0.62 -0.303 0.00096 0.0966 0.1977
215 0.425 COMBO 108 Combination -7.001 -0.62 -0.303 0.00096 0.1288 0.2637
215 0.53125 COMBO 108 Combination -6.988 -0.62 -0.303 0.00096 0.161 0.3296
215 0.6375 COMBO 108 Combination -6.975 -0.62 -0.303 0.00096 0.1932 0.3955
215 0.74375 COMBO 108 Combination -6.962 -0.62 -0.303 0.00096 0.2255 0.4614
215 0.85 COMBO 108 Combination -6.949 -0.62 -0.303 0.00096 0.2577 0.5273
215 0 COMBO 109 Combination -7.003 -0.363 -0.291 0.00084 0 0

212
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
215 0.10625 COMBO 109 Combination -6.99 -0.363 -0.291 0.00084 0.0309 0.0385
215 0.2125 COMBO 109 Combination -6.977 -0.363 -0.291 0.00084 0.0618 0.0771
215 0.31875 COMBO 109 Combination -6.964 -0.363 -0.291 0.00084 0.0927 0.1156
215 0.425 COMBO 109 Combination -6.951 -0.363 -0.291 0.00084 0.1236 0.1541
215 0.53125 COMBO 109 Combination -6.938 -0.363 -0.291 0.00084 0.1545 0.1926
215 0.6375 COMBO 109 Combination -6.925 -0.363 -0.291 0.00084 0.1854 0.2312
215 0.74375 COMBO 109 Combination -6.913 -0.363 -0.291 0.00084 0.2163 0.2697
215 0.85 COMBO 109 Combination -6.9 -0.363 -0.291 0.00084 0.2472 0.3082
215 0 COMBO 110 Combination -6.783 -0.302 -0.229 -8E-05 0 0
215 0.10625 COMBO 110 Combination -6.77 -0.302 -0.229 -8E-05 0.0244 0.0321
215 0.2125 COMBO 110 Combination -6.757 -0.302 -0.229 -8E-05 0.0487 0.0642
215 0.31875 COMBO 110 Combination -6.744 -0.302 -0.229 -8E-05 0.0731 0.0963
215 0.425 COMBO 110 Combination -6.732 -0.302 -0.229 -8E-05 0.0975 0.1284
215 0.53125 COMBO 110 Combination -6.719 -0.302 -0.229 -8E-05 0.1218 0.1605
215 0.6375 COMBO 110 Combination -6.706 -0.302 -0.229 -8E-05 0.1462 0.1926
215 0.74375 COMBO 110 Combination -6.693 -0.302 -0.229 -8E-05 0.1705 0.2246
215 0.85 COMBO 110 Combination -6.68 -0.302 -0.229 -8E-05 0.1949 0.2567
215 0 COMBO 111 Combination -7.039 -0.813 3.04 -0.0008 0 0
215 0.10625 COMBO 111 Combination -7.026 -0.813 3.04 -0.0008 -0.323 0.0863
215 0.2125 COMBO 111 Combination -7.013 -0.813 3.04 -0.0008 -0.646 0.1727
215 0.31875 COMBO 111 Combination -7 -0.813 3.04 -0.0008 -0.969 0.259
215 0.425 COMBO 111 Combination -6.987 -0.813 3.04 -0.0008 -1.292 0.3454
215 0.53125 COMBO 111 Combination -6.974 -0.813 3.04 -0.0008 -1.6151 0.4317
215 0.6375 COMBO 111 Combination -6.962 -0.813 3.04 -0.0008 -1.9381 0.5181
215 0.74375 COMBO 111 Combination -6.949 -0.813 3.04 -0.0008 -2.2611 0.6044
215 0.85 COMBO 111 Combination -6.936 -0.813 3.04 -0.0008 -2.5841 0.6908
215 0 COMBO 112 Combination -5.272 1.035 -0.319 -0.0003 0 0
215 0.10625 COMBO 112 Combination -5.259 1.035 -0.319 -0.0003 0.0339 -0.1099
215 0.2125 COMBO 112 Combination -5.247 1.035 -0.319 -0.0003 0.0677 -0.2199
215 0.31875 COMBO 112 Combination -5.234 1.035 -0.319 -0.0003 0.1016 -0.3298
215 0.425 COMBO 112 Combination -5.221 1.035 -0.319 -0.0003 0.1355 -0.4397
215 0.53125 COMBO 112 Combination -5.208 1.035 -0.319 -0.0003 0.1694 -0.5496
215 0.6375 COMBO 112 Combination -5.195 1.035 -0.319 -0.0003 0.2032 -0.6596
215 0.74375 COMBO 112 Combination -5.182 1.035 -0.319 -0.0003 0.2371 -0.7695
215 0.85 COMBO 112 Combination -5.169 1.035 -0.319 -0.0003 0.271 -0.8794
223 0 COMBO 1 Combination -4.775 1.311 -0.066 -0.0006 0 0
223 0.06005 COMBO 1 Combination -4.762 1.311 -0.066 -0.0006 0.004 -0.0787
223 0.1201 COMBO 1 Combination -4.75 1.311 -0.066 -0.0006 0.0079 -0.1575
223 0.18015 COMBO 1 Combination -4.738 1.311 -0.066 -0.0006 0.0119 -0.2362
223 0.2402 COMBO 1 Combination -4.726 1.311 -0.066 -0.0006 0.0158 -0.3149
223 0.30025 COMBO 1 Combination -4.714 1.311 -0.066 -0.0006 0.0198 -0.3936
223 0.3603 COMBO 1 Combination -4.702 1.311 -0.066 -0.0006 0.0238 -0.4724
223 0.42035 COMBO 1 Combination -4.69 1.311 -0.066 -0.0006 0.0277 -0.5511
223 0.4804 COMBO 1 Combination -4.678 1.311 -0.066 -0.0006 0.0317 -0.6298
223 0 COMBO 2 Combination -4.247 1.44 0.067 -0.0014 0 0
223 0.06005 COMBO 2 Combination -4.234 1.44 0.067 -0.0014 -0.004 -0.0865
223 0.1201 COMBO 2 Combination -4.222 1.44 0.067 -0.0014 -0.008 -0.173

213
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
223 0.18015 COMBO 2 Combination -4.21 1.44 0.067 -0.0014 -0.012 -0.2595
223 0.2402 COMBO 2 Combination -4.198 1.44 0.067 -0.0014 -0.016 -0.3459
223 0.30025 COMBO 2 Combination -4.186 1.44 0.067 -0.0014 -0.02 -0.4324
223 0.3603 COMBO 2 Combination -4.174 1.44 0.067 -0.0014 -0.024 -0.5189
223 0.42035 COMBO 2 Combination -4.162 1.44 0.067 -0.0014 -0.028 -0.6054
223 0.4804 COMBO 2 Combination -4.15 1.44 0.067 -0.0014 -0.032 -0.6919
223 0 COMBO 3 Combination -6.848 1.025 -0.076 0.00079 0 0
223 0.06005 COMBO 3 Combination -6.836 1.025 -0.076 0.00079 0.0046 -0.0616
223 0.1201 COMBO 3 Combination -6.823 1.025 -0.076 0.00079 0.0092 -0.1231
223 0.18015 COMBO 3 Combination -6.811 1.025 -0.076 0.00079 0.0137 -0.1847
223 0.2402 COMBO 3 Combination -6.799 1.025 -0.076 0.00079 0.0183 -0.2462
223 0.30025 COMBO 3 Combination -6.787 1.025 -0.076 0.00079 0.0229 -0.3078
223 0.3603 COMBO 3 Combination -6.775 1.025 -0.076 0.00079 0.0275 -0.3694
223 0.42035 COMBO 3 Combination -6.763 1.025 -0.076 0.00079 0.032 -0.4309
223 0.4804 COMBO 3 Combination -6.751 1.025 -0.076 0.00079 0.0366 -0.4925
223 0 COMBO 4 Combination -6.413 1.266 0.044 0.00019 0 0
223 0.06005 COMBO 4 Combination -6.401 1.266 0.044 0.00019 -0.0026 -0.076
223 0.1201 COMBO 4 Combination -6.389 1.266 0.044 0.00019 -0.0053 -0.1521
223 0.18015 COMBO 4 Combination -6.377 1.266 0.044 0.00019 -0.0079 -0.2281
223 0.2402 COMBO 4 Combination -6.365 1.266 0.044 0.00019 -0.0106 -0.3042
223 0.30025 COMBO 4 Combination -6.352 1.266 0.044 0.00019 -0.0132 -0.3802
223 0.3603 COMBO 4 Combination -6.34 1.266 0.044 0.00019 -0.0159 -0.4563
223 0.42035 COMBO 4 Combination -6.328 1.266 0.044 0.00019 -0.0185 -0.5323
223 0.4804 COMBO 4 Combination -6.316 1.266 0.044 0.00019 -0.0211 -0.6084
223 0 COMBO 5 Combination -5.324 0.904 -0.537 0.0014 0 0
223 0.06005 COMBO 5 Combination -5.311 0.904 -0.537 0.0014 0.0322 -0.0543
223 0.1201 COMBO 5 Combination -5.299 0.904 -0.537 0.0014 0.0644 -0.1086
223 0.18015 COMBO 5 Combination -5.287 0.904 -0.537 0.0014 0.0967 -0.1629
223 0.2402 COMBO 5 Combination -5.275 0.904 -0.537 0.0014 0.1289 -0.2172
223 0.30025 COMBO 5 Combination -5.263 0.904 -0.537 0.0014 0.1611 -0.2715
223 0.3603 COMBO 5 Combination -5.251 0.904 -0.537 0.0014 0.1933 -0.3257
223 0.42035 COMBO 5 Combination -5.239 0.904 -0.537 0.0014 0.2255 -0.38
223 0.4804 COMBO 5 Combination -5.227 0.904 -0.537 0.0014 0.2577 -0.4343
223 0 COMBO 6 Combination -4.898 1.145 -0.411 0.00082 0 0
223 0.06005 COMBO 6 Combination -4.886 1.145 -0.411 0.00082 0.0247 -0.0687
223 0.1201 COMBO 6 Combination -4.874 1.145 -0.411 0.00082 0.0494 -0.1375
223 0.18015 COMBO 6 Combination -4.862 1.145 -0.411 0.00082 0.0741 -0.2062
223 0.2402 COMBO 6 Combination -4.85 1.145 -0.411 0.00082 0.0987 -0.275
223 0.30025 COMBO 6 Combination -4.838 1.145 -0.411 0.00082 0.1234 -0.3437
223 0.3603 COMBO 6 Combination -4.826 1.145 -0.411 0.00082 0.1481 -0.4125
223 0.42035 COMBO 6 Combination -4.813 1.145 -0.411 0.00082 0.1728 -0.4812
223 0.4804 COMBO 6 Combination -4.801 1.145 -0.411 0.00082 0.1975 -0.55
223 0 COMBO 7 Combination -6.017 0.887 -0.203 0.0016 0 0
223 0.06005 COMBO 7 Combination -6.005 0.887 -0.203 0.0016 0.0122 -0.0533
223 0.1201 COMBO 7 Combination -5.993 0.887 -0.203 0.0016 0.0244 -0.1065
223 0.18015 COMBO 7 Combination -5.981 0.887 -0.203 0.0016 0.0366 -0.1598
223 0.2402 COMBO 7 Combination -5.969 0.887 -0.203 0.0016 0.0488 -0.2131

214
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
223 0.30025 COMBO 7 Combination -5.956 0.887 -0.203 0.0016 0.061 -0.2663
223 0.3603 COMBO 7 Combination -5.944 0.887 -0.203 0.0016 0.0732 -0.3196
223 0.42035 COMBO 7 Combination -5.932 0.887 -0.203 0.0016 0.0854 -0.3729
223 0.4804 COMBO 7 Combination -5.92 0.887 -0.203 0.0016 0.0977 -0.4261
223 0 COMBO 8 Combination -5.63 0.826 -0.164 -0.0003 0 0
223 0.06005 COMBO 8 Combination -5.618 0.826 -0.164 -0.0003 0.0098 -0.0496
223 0.1201 COMBO 8 Combination -5.606 0.826 -0.164 -0.0003 0.0197 -0.0993
223 0.18015 COMBO 8 Combination -5.594 0.826 -0.164 -0.0003 0.0295 -0.1489
223 0.2402 COMBO 8 Combination -5.582 0.826 -0.164 -0.0003 0.0393 -0.1985
223 0.30025 COMBO 8 Combination -5.57 0.826 -0.164 -0.0003 0.0491 -0.2481
223 0.3603 COMBO 8 Combination -5.558 0.826 -0.164 -0.0003 0.059 -0.2978
223 0.42035 COMBO 8 Combination -5.545 0.826 -0.164 -0.0003 0.0688 -0.3474
223 0.4804 COMBO 8 Combination -5.533 0.826 -0.164 -0.0003 0.0786 -0.397
223 0 COMBO 9 Combination -4.775 1.311 -0.066 -0.0006 0 0
223 0.06005 COMBO 9 Combination -4.762 1.311 -0.066 -0.0006 0.004 -0.0787
223 0.1201 COMBO 9 Combination -4.75 1.311 -0.066 -0.0006 0.0079 -0.1575
223 0.18015 COMBO 9 Combination -4.738 1.311 -0.066 -0.0006 0.0119 -0.2362
223 0.2402 COMBO 9 Combination -4.726 1.311 -0.066 -0.0006 0.0158 -0.3149
223 0.30025 COMBO 9 Combination -4.714 1.311 -0.066 -0.0006 0.0198 -0.3936
223 0.3603 COMBO 9 Combination -4.702 1.311 -0.066 -0.0006 0.0238 -0.4724
223 0.42035 COMBO 9 Combination -4.69 1.311 -0.066 -0.0006 0.0277 -0.5511
223 0.4804 COMBO 9 Combination -4.678 1.311 -0.066 -0.0006 0.0317 -0.6298
223 0 COMBO 10 Combination -4.247 1.44 0.067 -0.0014 0 0
223 0.06005 COMBO 10 Combination -4.234 1.44 0.067 -0.0014 -0.004 -0.0865
223 0.1201 COMBO 10 Combination -4.222 1.44 0.067 -0.0014 -0.008 -0.173
223 0.18015 COMBO 10 Combination -4.21 1.44 0.067 -0.0014 -0.012 -0.2595
223 0.2402 COMBO 10 Combination -4.198 1.44 0.067 -0.0014 -0.016 -0.3459
223 0.30025 COMBO 10 Combination -4.186 1.44 0.067 -0.0014 -0.02 -0.4324
223 0.3603 COMBO 10 Combination -4.174 1.44 0.067 -0.0014 -0.024 -0.5189
223 0.42035 COMBO 10 Combination -4.162 1.44 0.067 -0.0014 -0.028 -0.6054
223 0.4804 COMBO 10 Combination -4.15 1.44 0.067 -0.0014 -0.032 -0.6919
223 0 COMBO 11 Combination -17.331 4.99 -0.298 -0.0006 0 0
223 0.06005 COMBO 11 Combination -17.319 4.99 -0.298 -0.0006 0.0179 -0.2996
223 0.1201 COMBO 11 Combination -17.307 4.99 -0.298 -0.0006 0.0358 -0.5992
223 0.18015 COMBO 11 Combination -17.294 4.99 -0.298 -0.0006 0.0537 -0.8989
223 0.2402 COMBO 11 Combination -17.282 4.99 -0.298 -0.0006 0.0716 -1.1985
223 0.30025 COMBO 11 Combination -17.27 4.99 -0.298 -0.0006 0.0896 -1.4981
223 0.3603 COMBO 11 Combination -17.258 4.99 -0.298 -0.0006 0.1075 -1.7977
223 0.42035 COMBO 11 Combination -17.246 4.99 -0.298 -0.0006 0.1254 -2.0974
223 0.4804 COMBO 11 Combination -17.234 4.99 -0.298 -0.0006 0.1433 -2.397
223 0 COMBO 12 Combination -4.688 1.307 -0.063 -0.0006 0 0
223 0.06005 COMBO 12 Combination -4.676 1.307 -0.063 -0.0006 0.0038 -0.0785
223 0.1201 COMBO 12 Combination -4.663 1.307 -0.063 -0.0006 0.0076 -0.1569
223 0.18015 COMBO 12 Combination -4.651 1.307 -0.063 -0.0006 0.0113 -0.2354
223 0.2402 COMBO 12 Combination -4.639 1.307 -0.063 -0.0006 0.0151 -0.3139
223 0.30025 COMBO 12 Combination -4.627 1.307 -0.063 -0.0006 0.0189 -0.3923
223 0.3603 COMBO 12 Combination -4.615 1.307 -0.063 -0.0006 0.0227 -0.4708

215
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
223 0.42035 COMBO 12 Combination -4.603 1.307 -0.063 -0.0006 0.0264 -0.5492
223 0.4804 COMBO 12 Combination -4.591 1.307 -0.063 -0.0006 0.0302 -0.6277
223 0 COMBO 13 Combination -4.779 1.316 -0.043 -0.0007 0 0
223 0.06005 COMBO 13 Combination -4.767 1.316 -0.043 -0.0007 0.0026 -0.079
223 0.1201 COMBO 13 Combination -4.755 1.316 -0.043 -0.0007 0.0052 -0.1581
223 0.18015 COMBO 13 Combination -4.742 1.316 -0.043 -0.0007 0.0077 -0.2371
223 0.2402 COMBO 13 Combination -4.73 1.316 -0.043 -0.0007 0.0103 -0.3162
223 0.30025 COMBO 13 Combination -4.718 1.316 -0.043 -0.0007 0.0129 -0.3952
223 0.3603 COMBO 13 Combination -4.706 1.316 -0.043 -0.0007 0.0155 -0.4743
223 0.42035 COMBO 13 Combination -4.694 1.316 -0.043 -0.0007 0.018 -0.5533
223 0.4804 COMBO 13 Combination -4.682 1.316 -0.043 -0.0007 0.0206 -0.6324
223 0 COMBO 14 Combination -13.796 4.167 -0.141 -0.0012 0 0
223 0.06005 COMBO 14 Combination -13.784 4.167 -0.141 -0.0012 0.0085 -0.2502
223 0.1201 COMBO 14 Combination -13.771 4.167 -0.141 -0.0012 0.0169 -0.5004
223 0.18015 COMBO 14 Combination -13.759 4.167 -0.141 -0.0012 0.0254 -0.7507
223 0.2402 COMBO 14 Combination -13.747 4.167 -0.141 -0.0012 0.0338 -1.0009
223 0.30025 COMBO 14 Combination -13.735 4.167 -0.141 -0.0012 0.0423 -1.2511
223 0.3603 COMBO 14 Combination -13.723 4.167 -0.141 -0.0012 0.0507 -1.5013
223 0.42035 COMBO 14 Combination -13.711 4.167 -0.141 -0.0012 0.0592 -1.7515
223 0.4804 COMBO 14 Combination -13.699 4.167 -0.141 -0.0012 0.0677 -2.0017
223 0 COMBO 15 Combination -4.313 1.405 0.036 -0.0012 0 0
223 0.06005 COMBO 15 Combination -4.301 1.405 0.036 -0.0012 -0.0021 -0.0843
223 0.1201 COMBO 15 Combination -4.289 1.405 0.036 -0.0012 -0.0043 -0.1687
223 0.18015 COMBO 15 Combination -4.277 1.405 0.036 -0.0012 -0.0064 -0.253
223 0.2402 COMBO 15 Combination -4.265 1.405 0.036 -0.0012 -0.0086 -0.3374
223 0.30025 COMBO 15 Combination -4.253 1.405 0.036 -0.0012 -0.0107 -0.4217
223 0.3603 COMBO 15 Combination -4.241 1.405 0.036 -0.0012 -0.0129 -0.5061
223 0.42035 COMBO 15 Combination -4.229 1.405 0.036 -0.0012 -0.015 -0.5904
223 0.4804 COMBO 15 Combination -4.216 1.405 0.036 -0.0012 -0.0171 -0.6748
223 0 COMBO 16 Combination -4.382 1.412 0.051 -0.0013 0 0
223 0.06005 COMBO 16 Combination -4.37 1.412 0.051 -0.0013 -0.003 -0.0848
223 0.1201 COMBO 16 Combination -4.357 1.412 0.051 -0.0013 -0.0061 -0.1696
223 0.18015 COMBO 16 Combination -4.345 1.412 0.051 -0.0013 -0.0091 -0.2544
223 0.2402 COMBO 16 Combination -4.333 1.412 0.051 -0.0013 -0.0122 -0.3391
223 0.30025 COMBO 16 Combination -4.321 1.412 0.051 -0.0013 -0.0152 -0.4239
223 0.3603 COMBO 16 Combination -4.309 1.412 0.051 -0.0013 -0.0183 -0.5087
223 0.42035 COMBO 16 Combination -4.297 1.412 0.051 -0.0013 -0.0213 -0.5935
223 0.4804 COMBO 16 Combination -4.285 1.412 0.051 -0.0013 -0.0244 -0.6783
223 0 COMBO 17 Combination -14.127 4.067 -0.238 -0.0006 0 0
223 0.06005 COMBO 17 Combination -14.114 4.067 -0.238 -0.0006 0.0143 -0.2442
223 0.1201 COMBO 17 Combination -14.102 4.067 -0.238 -0.0006 0.0286 -0.4884
223 0.18015 COMBO 17 Combination -14.09 4.067 -0.238 -0.0006 0.0429 -0.7326
223 0.2402 COMBO 17 Combination -14.078 4.067 -0.238 -0.0006 0.0571 -0.9768
223 0.30025 COMBO 17 Combination -14.066 4.067 -0.238 -0.0006 0.0714 -1.221
223 0.3603 COMBO 17 Combination -14.054 4.067 -0.238 -0.0006 0.0857 -1.4652
223 0.42035 COMBO 17 Combination -14.042 4.067 -0.238 -0.0006 0.1 -1.7094
223 0.4804 COMBO 17 Combination -14.03 4.067 -0.238 -0.0006 0.1143 -1.9536

216
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
223 0 COMBO 18 Combination -14.195 4.074 -0.223 -0.0007 0 0
223 0.06005 COMBO 18 Combination -14.183 4.074 -0.223 -0.0007 0.0134 -0.2446
223 0.1201 COMBO 18 Combination -14.171 4.074 -0.223 -0.0007 0.0268 -0.4893
223 0.18015 COMBO 18 Combination -14.158 4.074 -0.223 -0.0007 0.0402 -0.7339
223 0.2402 COMBO 18 Combination -14.146 4.074 -0.223 -0.0007 0.0535 -0.9786
223 0.30025 COMBO 18 Combination -14.134 4.074 -0.223 -0.0007 0.0669 -1.2232
223 0.3603 COMBO 18 Combination -14.122 4.074 -0.223 -0.0007 0.0803 -1.4678
223 0.42035 COMBO 18 Combination -14.11 4.074 -0.223 -0.0007 0.0937 -1.7125
223 0.4804 COMBO 18 Combination -14.098 4.074 -0.223 -0.0007 0.1071 -1.9571
223 0 COMBO 19 Combination -13.731 4.163 -0.139 -0.0012 0 0
223 0.06005 COMBO 19 Combination -13.718 4.163 -0.139 -0.0012 0.0083 -0.25
223 0.1201 COMBO 19 Combination -13.706 4.163 -0.139 -0.0012 0.0166 -0.5
223 0.18015 COMBO 19 Combination -13.694 4.163 -0.139 -0.0012 0.025 -0.7501
223 0.2402 COMBO 19 Combination -13.682 4.163 -0.139 -0.0012 0.0333 -1.0001
223 0.30025 COMBO 19 Combination -13.67 4.163 -0.139 -0.0012 0.0416 -1.2501
223 0.3603 COMBO 19 Combination -13.658 4.163 -0.139 -0.0012 0.0499 -1.5001
223 0.42035 COMBO 19 Combination -13.646 4.163 -0.139 -0.0012 0.0582 -1.7501
223 0.4804 COMBO 19 Combination -13.634 4.163 -0.139 -0.0012 0.0665 -2.0001
223 0 COMBO 20 Combination -13.799 4.171 -0.124 -0.0013 0 0
223 0.06005 COMBO 20 Combination -13.787 4.171 -0.124 -0.0013 0.0074 -0.2505
223 0.1201 COMBO 20 Combination -13.775 4.171 -0.124 -0.0013 0.0148 -0.5009
223 0.18015 COMBO 20 Combination -13.762 4.171 -0.124 -0.0013 0.0223 -0.7514
223 0.2402 COMBO 20 Combination -13.75 4.171 -0.124 -0.0013 0.0297 -1.0018
223 0.30025 COMBO 20 Combination -13.738 4.171 -0.124 -0.0013 0.0371 -1.2523
223 0.3603 COMBO 20 Combination -13.726 4.171 -0.124 -0.0013 0.0445 -1.5027
223 0.42035 COMBO 20 Combination -13.714 4.171 -0.124 -0.0013 0.0519 -1.7532
223 0.4804 COMBO 20 Combination -13.702 4.171 -0.124 -0.0013 0.0593 -2.0037
223 0 COMBO 21 Combination -6.848 1.025 -0.076 0.00079 0 0
223 0.06005 COMBO 21 Combination -6.836 1.025 -0.076 0.00079 0.0046 -0.0616
223 0.1201 COMBO 21 Combination -6.823 1.025 -0.076 0.00079 0.0092 -0.1231
223 0.18015 COMBO 21 Combination -6.811 1.025 -0.076 0.00079 0.0137 -0.1847
223 0.2402 COMBO 21 Combination -6.799 1.025 -0.076 0.00079 0.0183 -0.2462
223 0.30025 COMBO 21 Combination -6.787 1.025 -0.076 0.00079 0.0229 -0.3078
223 0.3603 COMBO 21 Combination -6.775 1.025 -0.076 0.00079 0.0275 -0.3694
223 0.42035 COMBO 21 Combination -6.763 1.025 -0.076 0.00079 0.032 -0.4309
223 0.4804 COMBO 21 Combination -6.751 1.025 -0.076 0.00079 0.0366 -0.4925
223 0 COMBO 22 Combination -6.413 1.266 0.044 0.00019 0 0
223 0.06005 COMBO 22 Combination -6.401 1.266 0.044 0.00019 -0.0026 -0.076
223 0.1201 COMBO 22 Combination -6.389 1.266 0.044 0.00019 -0.0053 -0.1521
223 0.18015 COMBO 22 Combination -6.377 1.266 0.044 0.00019 -0.0079 -0.2281
223 0.2402 COMBO 22 Combination -6.365 1.266 0.044 0.00019 -0.0106 -0.3042
223 0.30025 COMBO 22 Combination -6.352 1.266 0.044 0.00019 -0.0132 -0.3802
223 0.3603 COMBO 22 Combination -6.34 1.266 0.044 0.00019 -0.0159 -0.4563
223 0.42035 COMBO 22 Combination -6.328 1.266 0.044 0.00019 -0.0185 -0.5323
223 0.4804 COMBO 22 Combination -6.316 1.266 0.044 0.00019 -0.0211 -0.6084
223 0 COMBO 23 Combination -5.324 0.904 -0.537 0.0014 0 0
223 0.06005 COMBO 23 Combination -5.311 0.904 -0.537 0.0014 0.0322 -0.0543

217
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
223 0.1201 COMBO 23 Combination -5.299 0.904 -0.537 0.0014 0.0644 -0.1086
223 0.18015 COMBO 23 Combination -5.287 0.904 -0.537 0.0014 0.0967 -0.1629
223 0.2402 COMBO 23 Combination -5.275 0.904 -0.537 0.0014 0.1289 -0.2172
223 0.30025 COMBO 23 Combination -5.263 0.904 -0.537 0.0014 0.1611 -0.2715
223 0.3603 COMBO 23 Combination -5.251 0.904 -0.537 0.0014 0.1933 -0.3257
223 0.42035 COMBO 23 Combination -5.239 0.904 -0.537 0.0014 0.2255 -0.38
223 0.4804 COMBO 23 Combination -5.227 0.904 -0.537 0.0014 0.2577 -0.4343
223 0 COMBO 24 Combination -4.898 1.145 -0.411 0.00082 0 0
223 0.06005 COMBO 24 Combination -4.886 1.145 -0.411 0.00082 0.0247 -0.0687
223 0.1201 COMBO 24 Combination -4.874 1.145 -0.411 0.00082 0.0494 -0.1375
223 0.18015 COMBO 24 Combination -4.862 1.145 -0.411 0.00082 0.0741 -0.2062
223 0.2402 COMBO 24 Combination -4.85 1.145 -0.411 0.00082 0.0987 -0.275
223 0.30025 COMBO 24 Combination -4.838 1.145 -0.411 0.00082 0.1234 -0.3437
223 0.3603 COMBO 24 Combination -4.826 1.145 -0.411 0.00082 0.1481 -0.4125
223 0.42035 COMBO 24 Combination -4.813 1.145 -0.411 0.00082 0.1728 -0.4812
223 0.4804 COMBO 24 Combination -4.801 1.145 -0.411 0.00082 0.1975 -0.55
223 0 COMBO 25 Combination -6.017 0.887 -0.203 0.0016 0 0
223 0.06005 COMBO 25 Combination -6.005 0.887 -0.203 0.0016 0.0122 -0.0533
223 0.1201 COMBO 25 Combination -5.993 0.887 -0.203 0.0016 0.0244 -0.1065
223 0.18015 COMBO 25 Combination -5.981 0.887 -0.203 0.0016 0.0366 -0.1598
223 0.2402 COMBO 25 Combination -5.969 0.887 -0.203 0.0016 0.0488 -0.2131
223 0.30025 COMBO 25 Combination -5.956 0.887 -0.203 0.0016 0.061 -0.2663
223 0.3603 COMBO 25 Combination -5.944 0.887 -0.203 0.0016 0.0732 -0.3196
223 0.42035 COMBO 25 Combination -5.932 0.887 -0.203 0.0016 0.0854 -0.3729
223 0.4804 COMBO 25 Combination -5.92 0.887 -0.203 0.0016 0.0977 -0.4261
223 0 COMBO 26 Combination -5.63 0.826 -0.164 -0.0003 0 0
223 0.06005 COMBO 26 Combination -5.618 0.826 -0.164 -0.0003 0.0098 -0.0496
223 0.1201 COMBO 26 Combination -5.606 0.826 -0.164 -0.0003 0.0197 -0.0993
223 0.18015 COMBO 26 Combination -5.594 0.826 -0.164 -0.0003 0.0295 -0.1489
223 0.2402 COMBO 26 Combination -5.582 0.826 -0.164 -0.0003 0.0393 -0.1985
223 0.30025 COMBO 26 Combination -5.57 0.826 -0.164 -0.0003 0.0491 -0.2481
223 0.3603 COMBO 26 Combination -5.558 0.826 -0.164 -0.0003 0.059 -0.2978
223 0.42035 COMBO 26 Combination -5.545 0.826 -0.164 -0.0003 0.0688 -0.3474
223 0.4804 COMBO 26 Combination -5.533 0.826 -0.164 -0.0003 0.0786 -0.397
223 0 COMBO 27 Combination -4.747 1.337 2.178 0.0223 0 0
223 0.06005 COMBO 27 Combination -4.735 1.337 2.178 0.0223 -0.1308 -0.0803
223 0.1201 COMBO 27 Combination -4.723 1.337 2.178 0.0223 -0.2615 -0.1606
223 0.18015 COMBO 27 Combination -4.711 1.337 2.178 0.0223 -0.3923 -0.2409
223 0.2402 COMBO 27 Combination -4.699 1.337 2.178 0.0223 -0.5231 -0.3212
223 0.30025 COMBO 27 Combination -4.687 1.337 2.178 0.0223 -0.6539 -0.4015
223 0.3603 COMBO 27 Combination -4.674 1.337 2.178 0.0223 -0.7846 -0.4818
223 0.42035 COMBO 27 Combination -4.662 1.337 2.178 0.0223 -0.9154 -0.5621
223 0.4804 COMBO 27 Combination -4.65 1.337 2.178 0.0223 -1.0462 -0.6424
223 0 COMBO 28 Combination -6.835 5.79 0.078 -0.0007 0 0
223 0.06005 COMBO 28 Combination -6.823 5.79 0.078 -0.0007 -0.0047 -0.3477
223 0.1201 COMBO 28 Combination -6.81 5.79 0.078 -0.0007 -0.0093 -0.6954
223 0.18015 COMBO 28 Combination -6.798 5.79 0.078 -0.0007 -0.014 -1.0431

218
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
223 0.2402 COMBO 28 Combination -6.786 5.79 0.078 -0.0007 -0.0187 -1.3909
223 0.30025 COMBO 28 Combination -6.774 5.79 0.078 -0.0007 -0.0234 -1.7386
223 0.3603 COMBO 28 Combination -6.762 5.79 0.078 -0.0007 -0.028 -2.0863
223 0.42035 COMBO 28 Combination -6.75 5.79 0.078 -0.0007 -0.0327 -2.434
223 0.4804 COMBO 28 Combination -6.738 5.79 0.078 -0.0007 -0.0374 -2.7817
223 0 COMBO 29 Combination -15.35 3.952 -0.149 -0.0001 0 0
223 0.06005 COMBO 29 Combination -15.338 3.952 -0.149 -0.0001 0.0089 -0.2373
223 0.1201 COMBO 29 Combination -15.326 3.952 -0.149 -0.0001 0.0178 -0.4747
223 0.18015 COMBO 29 Combination -15.314 3.952 -0.149 -0.0001 0.0268 -0.712
223 0.2402 COMBO 29 Combination -15.302 3.952 -0.149 -0.0001 0.0357 -0.9494
223 0.30025 COMBO 29 Combination -15.29 3.952 -0.149 -0.0001 0.0446 -1.1867
223 0.3603 COMBO 29 Combination -15.278 3.952 -0.149 -0.0001 0.0535 -1.424
223 0.42035 COMBO 29 Combination -15.266 3.952 -0.149 -0.0001 0.0624 -1.6614
223 0.4804 COMBO 29 Combination -15.253 3.952 -0.149 -0.0001 0.0713 -1.8987
223 0 COMBO 30 Combination -15.025 4.133 -0.058 -0.0006 0 0
223 0.06005 COMBO 30 Combination -15.012 4.133 -0.058 -0.0006 0.0035 -0.2482
223 0.1201 COMBO 30 Combination -15 4.133 -0.058 -0.0006 0.007 -0.4964
223 0.18015 COMBO 30 Combination -14.988 4.133 -0.058 -0.0006 0.0105 -0.7446
223 0.2402 COMBO 30 Combination -14.976 4.133 -0.058 -0.0006 0.014 -0.9928
223 0.30025 COMBO 30 Combination -14.964 4.133 -0.058 -0.0006 0.0175 -1.241
223 0.3603 COMBO 30 Combination -14.952 4.133 -0.058 -0.0006 0.021 -1.4892
223 0.42035 COMBO 30 Combination -14.94 4.133 -0.058 -0.0006 0.0245 -1.7374
223 0.4804 COMBO 30 Combination -14.927 4.133 -0.058 -0.0006 0.028 -1.9857
223 0 COMBO 31 Combination -14.207 3.862 -0.494 0.00033 0 0
223 0.06005 COMBO 31 Combination -14.195 3.862 -0.494 0.00033 0.0296 -0.2319
223 0.1201 COMBO 31 Combination -14.183 3.862 -0.494 0.00033 0.0593 -0.4638
223 0.18015 COMBO 31 Combination -14.171 3.862 -0.494 0.00033 0.0889 -0.6957
223 0.2402 COMBO 31 Combination -14.159 3.862 -0.494 0.00033 0.1186 -0.9276
223 0.30025 COMBO 31 Combination -14.147 3.862 -0.494 0.00033 0.1482 -1.1594
223 0.3603 COMBO 31 Combination -14.135 3.862 -0.494 0.00033 0.1779 -1.3913
223 0.42035 COMBO 31 Combination -14.123 3.862 -0.494 0.00033 0.2075 -1.6232
223 0.4804 COMBO 31 Combination -14.11 3.862 -0.494 0.00033 0.2372 -1.8551
223 0 COMBO 32 Combination -13.889 4.042 -0.4 -0.0001 0 0
223 0.06005 COMBO 32 Combination -13.876 4.042 -0.4 -0.0001 0.024 -0.2427
223 0.1201 COMBO 32 Combination -13.864 4.042 -0.4 -0.0001 0.048 -0.4855
223 0.18015 COMBO 32 Combination -13.852 4.042 -0.4 -0.0001 0.072 -0.7282
223 0.2402 COMBO 32 Combination -13.84 4.042 -0.4 -0.0001 0.096 -0.9709
223 0.30025 COMBO 32 Combination -13.828 4.042 -0.4 -0.0001 0.12 -1.2136
223 0.3603 COMBO 32 Combination -13.816 4.042 -0.4 -0.0001 0.144 -1.4564
223 0.42035 COMBO 32 Combination -13.804 4.042 -0.4 -0.0001 0.168 -1.6991
223 0.4804 COMBO 32 Combination -13.792 4.042 -0.4 -0.0001 0.192 -1.9418
223 0 COMBO 33 Combination -14.728 3.849 -0.244 0.00045 0 0
223 0.06005 COMBO 33 Combination -14.715 3.849 -0.244 0.00045 0.0146 -0.2311
223 0.1201 COMBO 33 Combination -14.703 3.849 -0.244 0.00045 0.0293 -0.4622
223 0.18015 COMBO 33 Combination -14.691 3.849 -0.244 0.00045 0.0439 -0.6934
223 0.2402 COMBO 33 Combination -14.679 3.849 -0.244 0.00045 0.0586 -0.9245
223 0.30025 COMBO 33 Combination -14.667 3.849 -0.244 0.00045 0.0732 -1.1556

219
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
223 0.3603 COMBO 33 Combination -14.655 3.849 -0.244 0.00045 0.0878 -1.3867
223 0.42035 COMBO 33 Combination -14.643 3.849 -0.244 0.00045 0.1025 -1.6178
223 0.4804 COMBO 33 Combination -14.63 3.849 -0.244 0.00045 0.1171 -1.849
223 0 COMBO 34 Combination -14.438 3.803 -0.214 -0.001 0 0
223 0.06005 COMBO 34 Combination -14.425 3.803 -0.214 -0.001 0.0129 -0.2284
223 0.1201 COMBO 34 Combination -14.413 3.803 -0.214 -0.001 0.0257 -0.4568
223 0.18015 COMBO 34 Combination -14.401 3.803 -0.214 -0.001 0.0386 -0.6852
223 0.2402 COMBO 34 Combination -14.389 3.803 -0.214 -0.001 0.0514 -0.9136
223 0.30025 COMBO 34 Combination -14.377 3.803 -0.214 -0.001 0.0643 -1.142
223 0.3603 COMBO 34 Combination -14.365 3.803 -0.214 -0.001 0.0771 -1.3704
223 0.42035 COMBO 34 Combination -14.353 3.803 -0.214 -0.001 0.09 -1.5987
223 0.4804 COMBO 34 Combination -14.34 3.803 -0.214 -0.001 0.1028 -1.8271
223 0 COMBO 35 Combination -5.868 1.19 0.028 -0.0001 0 0
223 0.06005 COMBO 35 Combination -5.856 1.19 0.028 -0.0001 -0.0017 -0.0715
223 0.1201 COMBO 35 Combination -5.844 1.19 0.028 -0.0001 -0.0034 -0.1429
223 0.18015 COMBO 35 Combination -5.832 1.19 0.028 -0.0001 -0.005 -0.2144
223 0.2402 COMBO 35 Combination -5.82 1.19 0.028 -0.0001 -0.0067 -0.2859
223 0.30025 COMBO 35 Combination -5.808 1.19 0.028 -0.0001 -0.0084 -0.3574
223 0.3603 COMBO 35 Combination -5.795 1.19 0.028 -0.0001 -0.0101 -0.4288
223 0.42035 COMBO 35 Combination -5.783 1.19 0.028 -0.0001 -0.0118 -0.5003
223 0.4804 COMBO 35 Combination -5.771 1.19 0.028 -0.0001 -0.0135 -0.5718
223 0 COMBO 36 Combination -5.936 1.197 0.043 -0.0002 0 0
223 0.06005 COMBO 36 Combination -5.924 1.197 0.043 -0.0002 -0.0026 -0.0719
223 0.1201 COMBO 36 Combination -5.912 1.197 0.043 -0.0002 -0.0052 -0.1438
223 0.18015 COMBO 36 Combination -5.9 1.197 0.043 -0.0002 -0.0077 -0.2157
223 0.2402 COMBO 36 Combination -5.888 1.197 0.043 -0.0002 -0.0103 -0.2876
223 0.30025 COMBO 36 Combination -5.876 1.197 0.043 -0.0002 -0.0129 -0.3595
223 0.3603 COMBO 36 Combination -5.864 1.197 0.043 -0.0002 -0.0155 -0.4315
223 0.42035 COMBO 36 Combination -5.852 1.197 0.043 -0.0002 -0.0181 -0.5034
223 0.4804 COMBO 36 Combination -5.839 1.197 0.043 -0.0002 -0.0207 -0.5753
223 0 COMBO 37 Combination -5.542 1.371 0.118 -0.0006 0 0
223 0.06005 COMBO 37 Combination -5.53 1.371 0.118 -0.0006 -0.0071 -0.0823
223 0.1201 COMBO 37 Combination -5.518 1.371 0.118 -0.0006 -0.0142 -0.1647
223 0.18015 COMBO 37 Combination -5.506 1.371 0.118 -0.0006 -0.0213 -0.247
223 0.2402 COMBO 37 Combination -5.494 1.371 0.118 -0.0006 -0.0284 -0.3293
223 0.30025 COMBO 37 Combination -5.482 1.371 0.118 -0.0006 -0.0355 -0.4117
223 0.3603 COMBO 37 Combination -5.469 1.371 0.118 -0.0006 -0.0426 -0.494
223 0.42035 COMBO 37 Combination -5.457 1.371 0.118 -0.0006 -0.0497 -0.5764
223 0.4804 COMBO 37 Combination -5.445 1.371 0.118 -0.0006 -0.0568 -0.6587
223 0 COMBO 38 Combination -5.611 1.378 0.133 -0.0007 0 0
223 0.06005 COMBO 38 Combination -5.598 1.378 0.133 -0.0007 -0.008 -0.0828
223 0.1201 COMBO 38 Combination -5.586 1.378 0.133 -0.0007 -0.016 -0.1656
223 0.18015 COMBO 38 Combination -5.574 1.378 0.133 -0.0007 -0.024 -0.2483
223 0.2402 COMBO 38 Combination -5.562 1.378 0.133 -0.0007 -0.032 -0.3311
223 0.30025 COMBO 38 Combination -5.55 1.378 0.133 -0.0007 -0.04 -0.4139
223 0.3603 COMBO 38 Combination -5.538 1.378 0.133 -0.0007 -0.048 -0.4967
223 0.42035 COMBO 38 Combination -5.526 1.378 0.133 -0.0007 -0.056 -0.5794

220
 Job No. PHL.T3.25.21 Item POWERHOUSE Revison 00
Project CATAINGAN PROJECT Date 11/2021
SECTION 3-COMPUTER DESIGN Designed by LHD
Description
PRINTOUTS Checked by JCT
2. Element Forces Frame K5
Frame Station OutputCase CaseType P V2 V3 T M2 M3
Text m Text Text KN KN KN KN-m KN-m KN-m
223 0.4804 COMBO 38 Combination -5.513 1.378 0.133 -0.0007 -0.064 -0.6622
223 0 COMBO 39 Combination -4.725 1.099 -0.317 0.00037 0 0
223 0.06005 COMBO 39 Combination -4.713 1.099 -0.317 0.00037 0.019 -0.066
223 0.1201 COMBO 39 Combination -4.701 1.099 -0.317 0.00037 0.0381 -0.132
223 0.18015 COMBO 39 Combination -4.689 1.099 -0.317 0.00037 0.0571 -0.1981
223 0.2402 COMBO 39 Combination -4.677 1.099 -0.317 0.00037 0.0762 -0.2641
223 0.30025 COMBO 39 Combination -4.664 1.099 -0.317 0.00037 0.0952 -0.3301
223 0.3603 COMBO 39 Combination -4.652 1.099 -0.317 0.00037 0.1143 -0.3961
223 0.42035 COMBO 39 Combination -4.64 1.099 -0.317 0.00037 0.1333 -0.4621
223 0.4804 COMBO 39 Combination -4.628 1.099 -0.317 0.00037 0.1524 -0.5281
223 0 COMBO 40 Combination -4.793 1.107 -0.302 0.00027 0 0
223 0.06005 COMBO 40 Combination -4.781 1.107 -0.302 0.00027 0.0181 -0.0665
223 0.1201 COMBO 40 Combination -4.769 1.107 -0.302 0.00027 0.0363 -0.1329
223 0.18015 COMBO 40 Combination -4.757 1.107 -0.302 0.00027 0.0544 -0.1994
223 0.2402 COMBO 40 Combination -4.745 1.107 -0.302 0.00027 0.0726 -0.2658
223 0.30025 COMBO 40 Combination -4.733 1.107 -0.302 0.00027 0.0907 -0.3323
223 0.3603 COMBO 40 Combination -4.721 1.107 -0.302 0.00027 0.1089 -0.3987
223 0.42035 COMBO 40 Combination -4.709 1.107 -0.302 0.00027 0.127 -0.4652
223 0.4804 COMBO 40 Combination -4.696 1.107 -0.302 0.00027 0.1452 -0.5317
223 0 COMBO 41 Combination -4.406 1.28 -0.223 -9E-05 0 0
223 0.06005 COMBO 41 Combination -4.394 1.28 -0.223 -9E-05 0.0134 -0.0769
223 0.1201 COMBO 41 Combination -4.382 1.28 -0.223 -9E-05 0.0268 -0.1537
223 0.18015 COMBO 41 Combination -4.37 1.28 -0.223 -9E-05 0.0402 -0.2306
223 0.2402 COMBO 41 Combination -4.358 1.28 -0.223 -9E-05 0.0536 -0.3074
223 0.30025 COMBO 41 Combination -4.346 1.28 -0.223 -9E-05 0.067 -0.3843
223 0.3603 COMBO 41 Combination -4.333 1.28 -0.223 -9E-05 0.0804 -0.4611
223 0.42035 COMBO 41 Combination -4.321 1.28 -0.223 -9E-05 0.0938 -0.538
223 0.4804 COMBO 41 Combination -4.309 1.28 -0.223 -9E-05 0.1072 -0.6149
223 0 COMBO 42 Combination -4.475 1.287 -0.208 -0.0002 0 0
223 0.06005 COMBO 42 Combination -4.462 1.287 -0.208 -0.0002 0.0125 -0.0773
223 0.1201 COMBO 42 Combination -4.45 1.287 -0.208 -0.0002 0.025 -0.1546
223 0.18015 COMBO 42 Combination -4.438 1.287 -0.208 -0.0002 0.0375 -0.2319
223 0.2402 COMBO 42 Combination -4.426 1.287 -0.208 -0.0002 0.05 -0.3092
223 0.30025 COMBO 42 Combination -4.414 1.287 -0.208 -0.0002 0.0625 -0.3865
223 0.3603 COMBO 42 Combination -4.402 1.287 -0.208 -0.0002 0.075 -0.4638
223 0.42035 COMBO 42 Combination -4.39 1.287 -0.208 -0.0002 0.0875 -0.5411
223 0.4804 COMBO 42 Combination -4.377 1.287 -0.208 -0.0002 0.1 -0.6184
223 0 COMBO 43 Combination -5.245 1.087 -0.067 0.00049 0 0
223 0.06005 COMBO 43 Combination -5.233 1.087 -0.067 0.00049 0.004 -0.0652
223 0.1201 COMBO 43 Combination -5.221 1.087 -0.067 0.00049 0.0081 -0.1305
223 0.18015 COMBO 43 Combination -5.209 1.087 -0.067 0.00049 0.0121 -0.1957
223 0.2402 COMBO 43 Combination -5.197 1.087 -0.067 0.00049 0.0162 -0.261
223 0.30025 COMBO 43 Combination -5.185 1.087 -0.067 0.00049 0.0202 -0.3262
223 0.3603 COMBO 43 Combination -5.172 1.087 -0.067 0.00049 0.0242 -0.3915
223 0.42035 COMBO 43 Combination -5.16 1.087 -0.067 0.00049 0.0283 -0.4567
223 0.4804 COMBO 43 Combination -5.148 1.087 -0.067 0.00049 0.0323 -0.522
223 0 COMBO 44 Combination -5.313 1.094 -0.052 0.00039 0 0

221