User Manual

Xhorse APP

*Read this user manual carefully before using the device.

 Thank you
for choosing Xhorse device.
Contents Contents

Contents
1 Disclaimer 01 8 Immo Data Tool 30

2 Safety Precaution 01 8.1 Car models support list

3 Product List 01 8.2 Magotan/CC 48 transponder File Make Key

4 KEY TOOL PLUS Overview 03 8.3 File management

4.1 Main interface 9 Extended Function: Cutting Key 33

4.2 Ports and accessories 9.1 How to switch and connect the key cutting machine

4.3 Specifications 9.2 Introduction to key cutting machine functions

5 OBD IMMO Programming 14 10 Settings 38

5.1 Overview 10.1 Select

5.2 IMMO programming 10.2 WLAN connection

5.3 Authorization code 10.3 Language setting

5.4 E.g. Honda Accord immo programming 10.4 APP setting

6 Remote and Transponder 18 10.5 System setting

6.1 Remote generation & clone 10.6 Service/privacy policy

6.2 Transponder read, generation & clone 10.7 About us

6.3 Special functions 11 Warranty and After-sales Service 40

7 PROG 25

7.1 Overview

7.2 EEPROM Reading and Writing

7.3 BMW FRM module programming(Solder-Free)

7.4 LANDROVER RFA programming(Solder-Free)

7.5 PORSCHE BCM programming(Solder-Free)

 Disclaimer Product List

3 Product List
KEY TOOL PLUS comes with the following items. If you are missing any of those, please
1 Disclaimer
contact your local dealer. For specific functions of all the accessories, please see Chapter 4.
We congratulate you on your choice of KEY TOOL PLUS developed by Shenzhen Xhorse
No. Items Standard Advanced Description
Electronics Co., Ltd(Xhorse). Your new KEY TOOL PLUS has passed stringent controls
before it's released for sale. To ensure it operates perfectly, we recommend that you
1 KEY TOOL PLUS • • KEY TOOL PLUS tablet
follow the advice given in this instruction.
2 User Manual • • Device instruction
• This device is used only by the locksmiths that get authorization from the car owner for car remote
3 Certification and warranty card • • Certificate of conformity
matching purposes following relevant laws and regulations. We do not endorse illegal use.
and warranty card

• Any risk follows the illegal use of this document and Xhorse KEY TOOL PLUS will be the user's
responsibility. Xhorse does not share it. 4 Charger • • Fast charging plug

5 USB3.0 TYPE-C cable • • USB charging cable

• Xhorse does not assume any direct, indirect and incidental compensation for damage or any
other indirect economical losses. 6 OBD_DB25 cable • • OBD cable

7 OBD_KIA_10 connector • • OBD connector

8 OBD_KIA_20 connector • • OBD connector

2 Safety Precaution
9 OBD_HONDA_3 connector • • OBD adapter

For your own safety and the safety of others, and to prevent damage to the device and 10 Remote_PS2 programming cable • • Remote programming cable
vehicles upon which it is used, it is important that the safety instructions presented
11 Transponder box • • Transponder storage box
throughout this manual be read and understood by all persons operating or coming into
contact with the device. 12 Prog_DB15_15 cable - • DB15 adapter for Programming

13 Prog_EEPROM adapter - • EEPROM reading & writing adapter

• Do not place the device in a strong electromagnetic environment for strong electromagnetic
interference may damage the device. 14 Benz_IR reader - • Infrared Adapter for Benz

15 Benz_NEC1 adapter - • Adapter 1 for Benz NEC chip

• Do not plug in the power supply that does not conform to the power standard (see Chapter 4.3).
16 BENZ_NEC2 adapter - • Adapter 2 for Benz NEC chip
• Turn off the device if you are not using it for a long time or when it's under maintenance.
17 BENZ_NEC3 adapter - • Adapter 3 for Benz NEC chip
• Do not place the device in a humid, oily or dusty environment.
18 BENZ_power adapter - • BENZ non-removal adapter

• Do not press the device hard, drop the device, or expose the device to heavy sunlight. 19 9s12xE cable - • Cable for reading and writing
Motorola 9S12 series chip
• Keep the device out of the reach of babies and children.

20 MCU cable - • Cable for reading

and writing MCU chip

1 2
 KEY TOOL PLUS Overview KEY TOOL PLUS Overview

Searching icon: Type in the car model to quickly search its programming options on
remote, key, transponder and immo programming. See Fig. 4.1.1

4 KEY TOOL PLUS Overview

KEY TOOL PLUS provides an all-in-one automotive security solution for locksmiths. The
device combines immobilizer matching, remote generation, transponder clone, File Make Key
and reading & writing vehicle module data. Besides, it is available to control key cutting
machines developed by Xhorse.

4.1 Main interface

Fig.4.1.1

News (Message) center: Click the icon to get the latest update information. See
Fig. 4.1.2

4.1.1 Icon illustration

WIFI and Bluetooth: Click the icon for the WIFI and Bluetooth connection
settings. Fig.4.1.2

3 4
 KEY TOOL PLUS Overview KEY TOOL PLUS Overview

4.1.2 Main function menu

Help center: Click the icon to find helpful technical guidance. See Fig. 4.1.3
Immo Programming Transponder Clone
Vehicle OBD immo programming Read and clone vehicle transponders
menu (see Chapter 5) (see Chapter 6)

Generate Transponder Remote Program

Vehicle remote transponder Vehicle remote generation (see
generation (see Chapter 6) Chapter 6)

Immo Data Tool PROG

Vehicle immo programming by File Read & write EEPROM data, ECU and
Make Key function (see Chapter 8) other car modules data (see Chapter 7)

Cutting Key Update

Complete key cutting work with Xhorse System update center (see Fig. 4.1.4)
key cutting machines (see Chapter 9)

Fig.4.1.3

Feedback and suggestion Video center

Your valuable feedback and Tutorial videos are provided here.
suggestion will be highly appreciated.

Technical article I want to develop remotes

Technical guidance articles and You can apply for developing remotes
device detailed information are that you need but are not supported
provided here. at the moment by the device.

Help Vehicle immo information

Common questions and answers Information about vehicle immo
about the device are provided here. programming are provided here.

HU162T all key lost

Fig.4.1.4
HU162T data, Volkswagen new model key blank, are provided here.

Settings: click the icon to open the general setting interface (see Chapter 10).

5 6
 KEY TOOL PLUS Overview KEY TOOL PLUS Overview

My favorite：Users can bookmark vehicle remotes and key blanks to quickly access
their favorites with one click next time. See Fig. 4.1.6

4.1.3 Shortcut function

AI query：Scan the VIN code of the vehicle, it's able to automatically show the
operation options like detailed information, cutting key, remote program, immo
programming and immo data tool. See Fig. 4.1.5

Fig.4.1.6

Audi My account：Users can check the bonus points details, combine and unbind device
and complete the real-name verification. See Fig. 4.1.7

FAW-VW(Audi)
Medium and large vehicles
Car

Fig.4.1.5

Remote clone: Frequency detection and remote clone (see Chapter 6).

Remote renew: Unlock the remote which was programmed (see Chapter 6).

Special function: The function is commonly used for remote programming (see
Chapter 6). Fig.4.1.7

7 8
 KEY TOOL PLUS Overview KEY TOOL PLUS Overview

Synchronization：Users can synchronize tokens and collect bonus points. See

More ① Screen
Fig. 4.1.8
② Light sensor----detect the brightness in the current environment

③ Detection coil (including 125K low, 13.56M Medium, 300-900M high frequency)

-----Support reading, writing and cloning common immo transponder

-----Support reading common ID transponders

-----Support reading common IC transponders

-----Support frequency detection of common vehicle remotes

④ Immo transponder placement hole----for vehicle immo transponders

Fig.4.1.8

Update notification bar: The update information of the device.

5
Serial number: The serial number of the device.
6

4.2 Ports and accessories

4.2.1 Name of device ports

7 8 7
1 3
Fig. 4.2.2 Back View
2
4
⑤ Screw hole for tablet support(Optional accessory)
⑥ Hand strap holder

⑦ Speaker

⑧ Microphone

⑨ Camera & flashlight

Fig. 4.2.1 Front View

9 10
 KEY TOOL PLUS Overview KEY TOOL PLUS Overview

10 11 12 13 14 15

④ EEPROM adapter----Adapter for programming

⑩ On / Off / Screen Lock

⑪ USB charging port----support standard fast charge adapter and standard

⑤ DB15_15 connector----Connector for programming
Type-C port DC-5V input

⑫ PS2 port for remote generation

⑬ DB15 port----support standard & optional programming adapters with DB15 port

⑭ DB25 port for OBD immo programming ⑥ Benz IR reader----Infrared data collection adapter

⑮ Benz Infrared (IR) port----support IR read Benz FBS3 & FBS4 smart key
----support Benz IR reader

⑦ Benz adapter----NEC adapter

NEC adapters----We provide 3 different
4.2.2 Accessories
adapters depending on the versions of
Benz NEC smart remote.

① Charger & USB cable

⑧ BENZ_power adapter----BENZ non-removal adapter

② OBD_DB25 cable
apply for connecting
vehicle OBD port
⑨ 9s12xE----Cable for reading and writing

③ OBD connector Motorola 9S12 series chip

apply for connecting non-OBD II vehicle choose the fitting connector depending
on the car models and interface

⑩ MCU----Cable for reading

and writing MCU chip

KIA 20 pin KIA 10 pin KIA 3 pin

11 12
 KEY TOOL PLUS Overview OBD IMMO Programming

⑪ Remote programming cable

4.3 Specifications
5 OBD IMMO Programming
Name Specifications
5.1 Overview

Operating system Android 9.0 KEY TOOL PLUS can be connected to the car via OBD connection cable to complete OBD
immo programming and other OBD functions on most common car models. Currently, KEY
Processor 8-Core
TOOL PLUS supports lots of car brands such as Benz, BMW, Audi, VW, Toyota, Honda,
4xCortex-A53 up to 2.3Ghz+4xCortex-A53 up to 1.8Ghz
Mazda, Ford, Cadillac, Hyundai, Kia, Renault, Nissan, SEAT, Fiat, JEEP and Chrysler.
Screen 10.1 inch, 1920*1200 resolution
As shown in Fig. 5.1.1, in immo programming menu, users can select the car brands
memory 4GB LPDDR4X SDRAM + 128GB EMMC
and car models according to the brand area. KEY TOOL PLUS supports immo
Camera 13.0MP programming/matching for over 20,000 car models around the world.

Input voltage (USB) 5V/9V

Input voltage (OBD) 12V/24V

Charging current 9V/3A

Standby time >7*24h

Battery 10000mAh

Working temperature -20~55 ℃

Storage temperature -30~65 ℃

Wireless port WIFI/Bluetooth

Sensor Light sensor

Dimension 320*181*34mm
Fig.5.1.1

13 14
 OBD IMMO Programming OBD IMMO Programming

5.2 IMMO programming

After selecting your car model, the supported OBD programming menu will show up
on the screen (see Fig. 5.2.1). For the same model, there might be a variety of immo
systems. If users can't identify which system it is, users can try them out one by one,
or detect it automatically. The common OBD functions include adding key, all key lost
and remote clearing.

Fig.5.3.1

5.4 E.g. Honda Accord immo programming

Honda Accord, as a classic model, the immo systems and immo programming opera-
tions are different due to the different car model year. KEY TOOL PLUS supports immo
programming of all models of Accord (see Fig. 5.4.1). Users can choose the smart key
Fig.5.2.1
system and immobilizer system based on the immobilizer type of the original car.
Read key number: You can acquire the number of remotes that the car currently has by OBD.

Add key: You can program the key by OBD.

Clear DTCs: You can clear DTCs generated while programming.

5.3 Authorization code

The authorization code is required while completing immo programming on some car
models. KEY TOOL PLUS supports authorization code reading of some car models.
For those codes it can't read, users need to ask for the authorized person to get the Fig.5.4.1
Note：
authorization code, then to complete the immobilizer programming.
Smart key system: Original car key belongs to keyless entry.
For example, the PEUGEOT series car models need password reading. In Fig. 5.3.1,
there are different methods to read passwords according to different car model years. Immobilizer system: Original car key belongs to flip key.

Users can try them out one by one.

15 16
 OBD IMMO Programming Remote and Transponder

6 Remote and Transponder

KEY TOOL PLUS supports various functions such as remote generation, transponder
clone and smart key generation for a variety of car models. Users can easily generate
remotes for most car models by using Xhorse universal remotes on KEY TOOL PLUS.

For example, for the 2020 10th generation Honda Accord, select the smart key system
(2018-) option, follow the steps on the screen and get on the vehicle to complete the 6.1 Remote generation & clone
rest steps. See Fig. 5.4.2
KEY TOOL PLUS supports remote generation for ordinary cars, smart key generation,
frequency detection, remote clone for a variety of car models. More car models will be
supported for free in the future.

In remote program, you can search the car brand based on the brand area on the left,
via on the right, or in all brands. Besides, KEY TOOL PLUS also supports my favor-
ites for your convenience as shown in Fig. 6.1.1.

Fig.5.4.2

Fig.6.1.1

17 18
 Remote and Transponder Remote and Transponder

Remote clone can be completed in this interface. To better detect the remote The special clone function is for remotes with non-fix format. Because the special
frequency, the device needs to set the appropriate frequency range. The default clone function is compulsive, there is no guarantee that this function will work normal-
frequency range is 315 MHz to 433 MHz. If you need to detect other frequency, you ly after copying. The clone interface is shown in Fig. 6.1.4.
can switch the frequency range manually. See Fig. 6.1.2

Fig.6.1.2
Fig.6.1.4
Some new remotes can be directly cloned with the original remotes. KEY TOOL PLUS
supports two common types of remote clone function and fix code editing function. Fix code editing serves as a fix tool for some fix code remotes. When the remote function
is partially damaged, users can generate a fully functional remote by using the editing
HCS/fix code clone is used to complete remote clone for HCS3XX rolling code, PT2262, LX918,
function as shown in Fig. 6.1.5.
HT6P20 and so on. Other types of remotes that are not fix code format will not show the clone
data. See Fig. 6.1.3, the HCS301 remote data clone of BYD F3. Please see the example below.

Fig.6.1.3 Fig.6.1.5
19 20
 Remote and Transponder Remote and Transponder

6.2 Transponder read, generation & clone

KEY TOOL PLUS has comprehensive programming functions covering transponder Some vehicle remote needs a specialized transponder when matching. KEY TOOL PLUS
detection, clone and generation which supports most common transponders such as 11, can convert Xhorse super transponder into common car model's transponder. See Fig.
12, 13, 33, 42, 46, 4D, 48, 8A, 8C. It also supports Xhorse super transponder. 6.2.3, the super transponder is converted into a Toyota Corolla 8A chip.

As shown in Fig. 6.2.1, KEY TOOL PLUS can precisely read the remote transponder as
AUDI 5th generation and also read the remote reading status, remote frequency, synchro-
nized mileage information of the vehicle.

Fig.6.2.3
Fig.6.2.1

Some vehicle transponders can be directly cloned without any need to complete car
matching in the car. As shown in Fig 6.2.2, users can copy all the transponder ID48. For
6.3 Special functions
example, all transponder ID48 of VW car models can be directly cloned online, no need to
complete car matching in the car. As an all-in-one specialized key device for locksmiths, KEY TOOL PLUS offers a variety
of practical functions like remote renew, motorcycle key unlock, car key recharge and all
key lost coil detection.

Fig.6.2.2

21 22
 Remote and Transponder Remote and Transponder

6.3.1 Remote renew 6.3.3 Smart key customization

Car key will be locked after programming and can not be used again. This function can KEY TOOL PLUS supports customization on Xhorse universal smart key button settings
unlock programmed keys of multiple brands and models as shown in Fig. 6.3.1. Renew and frequency adjustment to apply to different scenarios and car models. As Fig. 6.3.3
adapters and cables are needed when operating. shown, first read the smart key, then adjust relevant parameter and write the data in.

Fig.6.3.1

6.3.2 Ignition coil signal detection

When car key is undergoing all lost, you can use KEY TOOL PLUS to detect the transpon- Fig.6.3.3
der type of the car's ignition coil and whether the coil is working. You can put the antenna
close to the ignition switch and turn it on and off a couple of times. Then ignition coil
information will be shown on the device. See Fig. 6.3.2

Fig.6.3.2

23 24
 PROG PROG

7 PROG

7.1 Overview
7.2 EEPROM Reading and Writing
KEY TOOL PLUS supports reading and writing common modules and chips. As shown
in Fig. 7.1.1, these modules include "EEPROM and FLASH", "IMMO", "Instrument", KEY TOOL PLUS supports reading and writing EEPROM chip of ordinary cars.
"Airbag" and "ECU". Users can operate according to the specific modules of car model As shown in Fig. 7.2.1 is an example of KEY TOOL PLUS reading BMW 35160.
or chip manufacturer.

Fig.7.1.1 Fig.7.2.1

Note：
① To complete certain functions, users need to connect KEY TOOL PLUS to the Steps：
specific adapters and get the required model prompt on the interface. ① Connect the device to the adapter, then solder the chip to the adapter as shown in Fig. 7.2.2.
② The function is only effective on the advanced edition. ② Execute reading, writing or other operations.

25 26
 PROG PROG

7.3 BMW FRM module programming(Solder-Free) 7.4 LANDROVER RFA programming(Solder-Free)

Steps： Steps：
① Connect the device to BMW adapter(Optional), then clip the adapter to BMW FRM module as ① Connect the device to Land Rover RFA adapter(Optional), then clip the adapter to Land Rover
shown in Fig. 7.3.1. RFA module as shown in Fig. 7.4.1.

Fig.7.3.1 Fig.7.4.1

② Execute reading range and data, then write the repaired data. ② Execute unlock, reading and other operations.

27 28
 PROG Immo Data Tool

7.5 PORSCHE BCM programming(Solder-Free) 8 Immo Data Tool

Steps： For some cars, key programming and other settings can't be finished via OBD port due
① Connect the device to Porsche BCM adapter(Optional), then clip the adaptor to Porsche BCM to its immobilizer system design. On this occasion, File Make Key can be used to
module as shown in Fig. 7.5.1. generate or add keys for them. The primary principle of File Make Key is to generate
transponder via reading related transponder data of the car immo module directly.
Thus the car can be started without programming.

8.1 Car models support list

KEY TOOL PLUS supports File Make Key function of common cars and motorcycles. The
support list is as follows in Fig. 8.1.1.

Fig.7.5.1

② Execute backup reading and other operations.

Fig.8.1.1

29 30
 Immo Data Tool Immo Data Tool

8.2 Magotan/CC 48 transpnder File Make Key 8.3 File management

File Make Key requires reading the car's module data. Firstly, you can use PROG KEY TOOL PLUS offers file management, in which you can choose data in local file or
function (see Chapter 7) to read the data of comfort computer for later use and finish my data (online cloud data file) in File Make Key process as shown in Fig. 8.3.1.
the following steps.

Steps：
① Choose VW/Magotan, CC ID48- 95320 option as shown in Fig. 8.2.1.

Fig.8.3.1

Local file: File reading from PROG function of KEY TOOL PLUS or file downloaded and stored
Fig.8.2.1 in the device.
② Load the original file of comfort computer that has been read, then generate dealer
My data: Cloud file uploaded through other terminals.
key or working key.
How to upload file to cloud server:
③ Test the key in car. Please note that some models need to write data back to ① Open http://i.xhorse.com
EEPROM via PROG function (see Chapter 7) and then you can test the key in car. ② Scan the QR code to log in as shown in Fig. 8.3.2.

Fig.8.3.2

③ Upload file through PC.

31 32
 Extended Function: Cutting Key Extended Function: Cutting Key

9 Extended Function: Cutting Key

KEY TOOL PLUS can be extended to control Xhorse key cutting machines (CONDOR,
DOLPHIN and Panda) and work as its screen. See the interface as shown in Fig. 9.1

Fig.9.1.1

② Click 'Search new device' and click on the serial number.

9.2 Introduction to key cutting machine functions

Fig.9.1 Vehicle Database

Vehicle Database shows all the key blanks supported by the currently connected device.
You can choose the brand, model, year and key blank you need. See Fig. 9.2.1.
9.1 How to switch and connect the key cutting machine

Steps：
① Click 'Switch device', select the machine you need as shown in Fig. 9.1.1.
Machines that are compatible with KEY TOOL PLUS include DOLPHIN, MiNi PLUS,
XC Mini and PANDA.

Fig.9.2.1

33 34
 Extended Function: Cutting Key Extended Function: Cutting Key

Cut by Biting All Key Lost

Cut by Biting is categorized by general key blanks. The device supports cutting by All Key Lost can help you get the bitting when you have partial key information like key tag, key code
different bitting. See Fig. 9.2.2 of car lock and such. See Fig. 9.2.4, you can acquire the car's bitting by entering related information.

Fig.9.2.2

Universal Key Duplication

Universal Key Duplication can copy six common car key's bitting. Usually, it's used when Fig.9.2.4

you don't have the key cutting data of the model. See Fig. 9.2.3
Find Bitting

For some cars, the ignition lock has more bittings than the car door lock. After
you acquire the car door lock's bitting, you can use find bitting function to get
all of the ignition lock's bitting.

Customize Key Data

For those key bitting that is not supported by the key cutting machine temporarily, users are encour-
aged to customize key data or download bitting data uploaded by other users in the sharing market.

Fig.9.2.3

35 36
 Extended Function: Cutting Key Settings

10 Settings
General Setting page can be entered through the shortcut button of setting as shown in Fig. 10.1.

Machine Parameter

Machine Parameter supports the initialized setting and adjustment of the key cutting machine.

Fig.10.1

10.1 Select
This option is for connecting the key cutting machine via Bluetooth. The device can connect to a key
cutting machine after you select the serial number.

Steps：
① Click 'Search new device'.
② Click the serial number and the machine is connected then.
Fig.9.2.5

10.2 WLAN connection

This option is for searching and connecting to WIFI.

Steps：
① Click 'Scan'.
② Choose the WIFI you want and enter the password. Key TOOL PLUS will connect
to WIFI then automatically.

37 38
 Settings Warranty and After-sales Service

10.3 Language setting 11 Warranty and After-sales Service

This option can change the language of the device. Xhorse offers a guarantee period of one year which starts from the purchasing date. If there is no
Note: Languages supported differ in different areas. invoice or the invoice is missing, purchase records from factory is used as a reference.

10.4 APP setting

Below scenarios are not covered in warranty:
This option shows APP voice prompt switch and update information.
• Damage of device caused by operations without observing user manual

• Damage of device caused by self-repair or modification

10.5 System setting
This option is for the general function setting of the device. As Fig. 10.1 shown, you can adjust the system volume, • Damage of device caused by dropping, collision, or improper voltage

brightness, sleep time, clear cache and restore system.

• Damage of device caused by Force Majeure

• Damage of device caused by long-term use in severe environment, in vehicle or boat

10.6 Service/privacy policy
• Shell stain, scratch and abrasion caused in daily use
This option shows the full version of the service agreement. To use KEY TOOL PLUS, you have to agree and follow

the Service/Privacy Policy first.

10.7 About us
This option shows manufacturer information and the current APP version of the device.

39 40
For after-sale service and technical support, please contact the dealer or Xhorse
online customer service by scanning the QR code in the back of the manual and
downloading Xhorse APP.