Downloaded From : www.EasyEngineering.

net

ww
w.E
a syE
ngi
nee
rin
g.n
et

**Note: Other Websites/Blogs Owners Please do not Copy (or) Republish

this Materials without Legal Permission of the Publishers.

**Disclimers : EasyEngineering not the original publisher of this Book/Material

on net. This e-book/Material has been collected from other sources of net.
Downloaded From : www.EasyEngineering.net
 Downloaded From : www.EasyEngineering.net

2. SYLLABUS
ME8793 PROCESS PLANNING AND COST ESTIMATION LTPC
3003
OBJECTIVES:
 To introduce the process planning concepts to make cost estimation for various
products after process planning
UNIT I INTRODUCTION TO PROCESS PLANNING 10
Introduction- methods of process planning-Drawing interpretation-Material

ww
evaluation – steps in process selection-.Production equipment and tooling selection
UNIT II PROCESS PLANNING ACTIVITIES 10

w.E
Process parameters calculation for various production processes-Selection jigs and
fixtures election of quality assurance methods - Set of documents for process planning-
asy
Economics of process planning- case studies

En
UNIT III INTRODUCTION TO COST ESTIMATION 8

gin
Importance of costing and estimation –methods of costing-elements of cost
estimation –Types of estimates – Estimating procedure- Estimation labor cost, material

eer
cost- allocation of over head charges- Calculation of depreciation cost
UNIT IV PRODUCTION COST ESTIMATION
ing 8

.ne
Estimation of Different Types of Jobs - Estimation of Forging Shop, Estimation of
Welding Shop, Estimation of Foundry Shop
UNIT V MACHINING TIME CALCULATION
Estimation of Machining Time - Importance of Machine Time Calculation-
9
t
Calculation of Machining Time for Different Lathe Operations ,Drilling and Boring -
Machining Time Calculation for Milling,Shaping and Planning -Machining Time
Calculation for Grinding
TOTAL: 45 PERIODS
OUTCOMES:
 Upon completion of this course, the students can able to use the concepts of process
planning and cost estimation for various products.

ii

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

TEXT BOOKS:
1. Peter scalon, “Process planning, Design/Manufacture Interface”, Elsevier science
technology Books, Dec 2002.
REFERENCES:
1. Ostwalal P.F. and Munez J., “Manufacturing Processes and systems”, 9th Edition, John
Wiley, 1998.

ww
2. Russell R.S and Tailor B.W, “Operations Management”, 4th Edition, PHI, 2003.
3. Chitale A.V. and Gupta R.C., “Product Design and Manufacturing”, 2nd Edition, PHI,
2002
w.E
4.Adithan.M.,”Process planning and Cost estimation”, New Age International (P)
Ltd.,2007 asy
En
gin
eer
ing
.ne
t

iii

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

3. TABLE OF CONTENTS

S.NO TABLE OF CONTENTS PAGE.NO

a. Aim and Objective of the subject 5

b. Detailed Lesson Plan 6

c. Unit I Introduction To Process Planning-Part A 10

d. Unit I Introduction To Process Planning -Part B 11

ww
e. Unit II Process Planning Activities -Part A 22

f. w.E
Unit II Process Planning Activities -Part B 24

g.
asy
Unit III- Introduction To Cost Estimation - Part A 33

h.
En
Unit III- Introduction To Cost Estimation -Part B 26

i. gin
Unit IV- Production Cost Estimation -Part A 48

j. Unit IV- Production Cost Estimation - Part B eer 51

k. Unit V- Machining Time Calculation - Part A ing 64

l. Unit V- Machining Time Calculation - Part B .ne

66

m. Question Bank 78 t

iv

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ME8793 PROCESS PLANNING AND COST ESTIMATION 3001

1. Aim and Objective of the Subject

 To introduce the process planning concepts to make cost estimation for various
products after Process planning
 Explain how a product is designed.
 Explain the steps involved in process design.

ww Enumerate the factors affecting process design.

 List the types of production and their characteristics.
w.E
 Differentiate between costing and cost estimation.

asy
 Understand the importance of preparing realistic cost estimates and concept of
over estimating and underestimating.

En
 Identify the various components of a cost estimate.

gin
 Understand the procedure for preparing the cost estimate.

eer
ing
.ne
t

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

GROUP OF INSTITUTIONS
Department of Mechanical Engineering
Detailed Lesson Plan

Name of the Subject& Code: ME8793 Process Planning and Cost Estimation

Text Book

1. Peter scalon, “Process planning, Design/Manufacture Interface”, Elsevier science

technology Books, Dec 2002.

ww
Unit
Hours
Cumulative Books
S.No
No
w.ETopic / Portions to be Covered Required
/ Planned
Hrs Referred

1 I
asy
INTRODUCTION TO PROCESS PLANNING 10
01 T1
2
En
Introduction About Process Planning 01

3 methods of process planning

gin 01 02 T1

T1
4
5
Drawing interpretation
eer 01 03
05 T1
Identifying useful supplementary information 02
ing 07 T1

.ne
6 Material evaluation 02

09 T1
7

8
steps in process selection

Production equipment and tooling selection

02

01 10
t T1

9 01 11
Revision

II PROCESS PLANNING ACTIVITIES 10

10 01 12 T1
Process parameters

11 02 14 T1
calculation for various production processes

vi

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

12 Selection jigs and fixtures 02 16 T1

13 01 17 T1
Selection of quality assurance methods

14 01 18 T1
Set of documents for process planning

15 02 20 T1
Economics of process planning

16 01 21 T1
case studies

17 01 22

ww
III
Revision

INTRODUCTION TO COST ESTIMATION 08

18 w.E Importance of costing and estimation 01 23 R4

19 Methods of costing asy 01 24 R4

20 En
Elements of cost estimation 01 25 R4

21 Types of estimates gin 01 26 R4

22 Estimating procedure ee 01
rin
27 R4

R4
23

24
Estimation labor cost, material cost
Allocation of over head
01

01 g.n 28

29 R4

25
Charges
Calculation of depreciation cost 01 et 30 R4

01 31
26 Revision

IV PRODUCTION COST ESTIMATION 08

27 Estimation of Different Types of Jobs 01 32 R4

28 Example Problem 01 33 R4

29 Estimation of Forging Shop 01 34 R4

vii

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

30 Example Problem 01 35 R4

01 36 R4
31 Estimation of Welding Shop

32 Example Problem 01 37 R4

01 38 R4
33 Estimation of Foundry Shop

34 Example Problem 01 39 R4

35 01 40
Revision

ww
V MACHINING TIME CALCULATION 08

36

37
w.E
Estimation of Machining Time, Importance of
Machine Time Calculation
Calculation of Machining
01

01
41

42
R4

R4

38 Example Problem
asy
Time for Different Lathe Operations
01 43 R4

39 En 44 R4

gin
Machining Time Calculation for Milling 01

45 R4

ee
40 Example Problem 01

41 Machining Time Calculation for Shaping and

Planning. rin
01 46 R4

42 Example Problem 01
g.n 47 R4

43

44
Machining Time Calculation for Grinding 01
et 48

49
R4

R4
Example Problem 01

45 01 50
Revision

viii

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

UNIT-I
(INTRODUCTION TO PROCESS PLANNING)
Part-A (2 Marks)

1. What is meant by process planning?

Process planning can also be defined as the systematic determination of the
methods by which a product is to be manufactured economically and
competitively. It consists of devising, selecting and specifying processes,
machine tools and other equipment to convert raw material into finished and
assembled products.

2. What are the factors affect process planning?

1. Availability of machine

ww 2. Delivery date
3. Quantity to be produced

w.E
4. Quality standards

3. What are the reasons for process documentation?

asy
1. To have a record on how a part is processed in order to plan future parts with
similar design requirements in a consistent manner

En
2. To provide a record for future job quoting, cost estimating, and standard
costing systems

gin
3. To act as a vehicle for communication

Manual Process Planning ee

4. State the general approaches to process planning?

Computer Aided Process Planning rin

5. What is CAPP? g.n
et
Computer Aided Process Planning can be categorized in two major areas; variant
planning, where library retrieval procedures are applied to find standard plans for
similar components, and generative process planning, where plans are generated
automatically for new components without reference to existing plans. The latter
system is most desirable but also the most difficult way of performing CAPP.

6. What are the advantages of CAPP?

1. It can generate consistent process plans rapidly
2. New components can be planned as easily as existing components
3. It has potential for integrating with an automated manufacturing facility to
provide detailed control information.

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

7. What are the process planning methods?

8. What are the factors affecting tooling selection?

The three basic factors that determine tool performance are:
1. the tool material;

ww 2. the tool geometry;

3. the use of cutting fluids.

w.E
9. State the parameters considered for material selection.

1. Functional requirements
2.
3. asy
Reliability
Service life durability
4.
5. En
Aesthetics and appearance
Environmental Factors

gin
10 . List the documents involved in process planning?

ee rin
There are two documents involved in the preparation of the process plans.
These are:
 routing sheets;
 Operations list. g.n
Part-B (16 Marks) et
1. Explain the two approaches commonly used in CAPP system bringing out their
advantages and limitations. (16)
The process planning function bridges the gap between engineering design and
manufacturing and is thus a critical element in integrating activities within
manufacturing organizations.
Current CAPP systems range from simple editors for manual planning to fully-
automated systems for planning a range of products. Some of the specific benefits of
CAPP are:
2

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

1. Improved productivity

2. Lower production cost

3. Consistency

4. Time savings

5. Rapid integration of new production capabilities

There are also several problems, associated with automation of the planning process.

1. The designer‟s intention may not always be obvious to the process planner

ww who must act on the designer‟s intentions. Differences in terminology and

perspectives separate these two functions.

w.E2. In order to fully automate process planning, the features of a part must be
extracted from the product model without human intervention; however,

asy
engineering drawings sometimes do not convey all the information about a part.

3. En
Information may be inaccessible or in a form incompatible with CAPP.
One problem source for all CAPP systems is the interface between CAD and

gin
CAPP, wherefeatures are translated into a form recognizable by CAPP. Different

ee
CAD systems have different methods of representing dimensions. Translation

rin
from CAD to CAPP is difficult and often requires a human interface.
4.
g.n
The designer is often unaware of the potential manufacturing constraints and
may produce a design that is either infeasible or costly to produce.
5. et
The generation and execution of a production plan may take a long time and
involve several organizations in different geographical locations. Plan-monitoring
and improvement may be complex and difficult to automate.

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
RETRIEVAL TYPE APPROACH
Variant process planning explores the similarities among components and
et
searches through a database to retrieve the standard process plan for the part family in
which the component belongs.
A standard process plan is a process plan that applies to an entire part family
when a standard plan is retrieved; a certain degree of modification follows in order to
accommodate the details of the design.
In general, variant process planning has two operational stages, a preparatory
stage and a production stage.

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

I. Stages in retrieval type

(a) The preparatory type stage involves coding, classifying and grouping existing
components into a family matrix and deriving out of this matrix a set of standard plans
that can be used and modified later to become process plans for new components.
(b) The production stage of a process planning system involves coding and
classifying new components so the family that most closely matches them can be
found. The standard plan for the family is retrieved and modified to produce the plan for
the new component see figure.
II. Group technology

ww The purpose of group technology is to organize the vast amount of manufactured

components which construct a product.
w.E
This method has the advantage of providing a tractable database where

asy
information about a part is easily managed, retrieved and implemented in computer
algorithms.

En
III. Coding and classification

gin
Coding and grouping components is done with the help of a coding system.

ee
Coding systems, which are the subject of group technology, involve the application of a
matrix, where a coding system of four digits is presented.
rin
g.n
The first digit corresponds to primary shape, the second digit corresponds to
secondary shape, the third to the auxiliary shape, and the fourth to the initial form of
the raw material.
et
The values for these four digits depend upon the particular geometric features of
the component, and are systematically presented in the matrix.
GENERATIVE APPROACH
Generative process planning synthesizes manufacturing information, particularly
regarding the capabilities of different manufacturing process, and creates process
plans for new components.
An ideal generative process planning system receives information about the
design of the part and generates the process plan, including processes to be used and
their sequences, without human intervention.
5

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

Unlike the variant approach, which uses standardized process-grouped family

plans, the generative approach is based on defining the process planning logic using
methods like.

2. Explain the manual approach to process planning with advantages and

limitations (16)
MANUAL PROCESS PLANNING
This type of planning is known as non-variant process planning. It is the commonest
type of planning used for production today.

ww
Planning the operations to be used to produce a part requires knowledge of two
groups of variables.

w.E
(a) The part requirements, and

asy
(b) The available machines and processes and the capabilities of each process.
Given these variables, the planner selects the combination of processes required to

En
produce a finished part. In selecting this combination of processes, a number of
criteria are employed.
gin
ee
Production cost and time are usually the dominant criteria in process selection. However,

rin
machine utilization and routing affect the plans chosen. In general, the process planner
tries to select the best set of process and machines to produce a whole family of parts
rather than just a single part.
g.n
et
There are variations in the level of detail found in route sheets among different
companies and industries.
Process planning is accomplished by releasing the drawing to the production shop
with the instructions „make to drawing‟.
More firms provide a more detailed list of steps describing each operation and
identifying each work center.
The process planning procedure is very much dependent on the experience and
judgments of the planner.
The manual approach to process planning begins when a detailed engineering
drawing and data on batch size are issued to a production engineer. This information is

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

used to determine the following:

• The manufacturing processes involved.
• The machine tools required to execute these processes.
• The tools required at each stage of processing.
• The fixtures required at each stage of processing.
• The number and depth of passes in a machining operation.
• The feeds and speeds appropriate to each operation.
• The type of finishing process necessary to achieve the specified tolerances
and surface quality.

ww As a first step, the production engineer examines the part drawing to identify

w.E
similarities with previously produced parts.
If similarities are recognized, a process plan is manually retrieved for the similar
item.
asy
The process plan is either used without modifications for identical parts or modified

En
to meet the manufacturing requirements of the new part.

gin
Although old process plans are used as references for similar parts, there is still

comparison, and editing techniques. ee

significant duplication of effort due to the lack of efficient information retrieval,

rin
g.n
The manual method may also lead to inconsistency in the final plans because it is
unlikely that two process planners will generate identical process plans.

et
As a part design changes during the product development cycle, the process
plan must also change, to incorporate new features in the part. As equipment,
processes and batch sizes changes, the optimum method for manufacturing the part
also changes and these changes must be reflecting in current process plans. However,
the lack of consistency and the labour intensity of the manual method make rapid
incorporation of process changes extremely difficult.
The experience of the process planner plays a significant role in modifying or
creating process plans, since the planner selects processes and process variable settings
which have been successfully implemented in similar situations in the past.
Since manual process planning is largely subjective, the quality of the process

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

plan is directly related to the skill and experience of the planner.

It is difficult or impossible to achieve consistent, optimized process plans with the
conventional manual method.
As a consequence planning and manufacturing costs are increased because of the
duplication of effort in the process planning function as well as specification of
excessive tooling and material requirements.
Production lead times also increase due to redundancies in the planning function.

3. List the information required for process planning. (16)

wwA process is defined as any group of actions instrumental to the achievement of the
output of an operations system in accordance with specified measure of

w.E
effectiveness.

asy
When the product designed, certain specifications are established; physical
dimensions, tolerance, standards and quality are set forth.

En
Then it becomes a matter of deciding over the specific details of how to achieve the

gin
desired output. This decision is the essence of process planning.

ee
The production function essentially is a transformation process that accepts the
inputs and gives the outputs after adding value to the inputs.
rin
g.n
Process selection is a major strategic decision as it involves allocation of men and
material resources as well as financial commitments for a long period.

1. NEW PRODUCT MANUFACTURE

A new design may have not been produced before or, alternatively, new
et
manufacturing operations may be introduced for the product.
Unless there is planning, the product introduction will be helter-skelter.

2. SALES
Opportunity for greater sale ability of an existing or new product can develop
from different colours, materials, finish, or functional and non-functional features.
Sales and marketing departments provide advice to help manufacturing planning.

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

3. QUANTITY
Changes in quantity require different sequences, tools, and equipment. The OP
planner differentiates for these fluctuations.
If volume increases, the chance is for lower cost. In contrast, if volume
decreases, the cost should not increase out of reason.
4. EFFECTIVE USE OF FACILITIES
Operation planning often can find alternate opportunities for the plant‟s
production facilities to take up any slack that may develop.
Seasonal products, which might be popular in the summer, need an alternative

ww
product for the winter season.

w.EFor example, companies that produce sporting equipment may use the same
facilities to produce tennis rackets and skis.

5. COST REDUCTION
asy
En
Various opportunities become available if the company has an ongoing cost
reduction effort. Suggestion plans, value analysis, design for manufacturing (DFM),

gin
and directed and systematic effort involve operations planning.

ee
INFORMATIONS REQUIRED TO DO PROCESS PLANNING
rin
1. Quantity of work to be done along with product specifications.
2. Quality of work to be completed. g.n
3. Availability of equipments, tools and personnels.
4. Sequence in which operations will be performed on the raw material.
et
5. Names of equipment on which the operations will be performed.
6. Standard time for each operation.
7. When the operations will be performed?

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

4. Explain the factors influencing in equipment selection in process planning (16)

TECHNICAL FACTORS
The focus of the technical factors is to ensure the machine tool selected is capable of
producing the part to the required specification. The main factors considered are:
Physical size - the machine tool must be of a sufficient size to cope with the
dimensions of the work piece and be physically able to carry out the desired
processing. In addition, the structure of the machine must be able to cope with the
weight of the work piece.

ww
Machine accuracy- this refers specifically to the capability of the machines under
consideration to be able to manufacture parts within the required dimensional and

w.E
geometric tolerance specification. Although already used to help identify suitable

asy
processes, the parameters specified for individual processes are stated in ranges.
Surface finish- this refers specifically to the capability of the machines under

En
consideration to be able to manufacture parts to the required surface specification.

gin
The reasoning behind considering this factor again is the same as for machine
accuracy.

ee
Cutting forces - the calculation of cutting forces should be carried out for the
operations identified using the method outlined. rin
g.n
The cutting forces involved are functions of the manufacturing parameters such
as feed, speed and depth of cut.
et
Although these manufacturing parameters have not been calculated for each
operation, each machine will have maximum values for these parameters.
OPERATIONAL FACTORS
The focus of the operational factors is really about the available resources and
how they can be used cost-effectively to fulfil the master production schedule (MPS).
The MPS is a time-phased plan for all end-items, that is, it is a schedule of what is to
be made and when.
From this perspective, the factors considered are more operations management
issues than processing planning issues. The factors include:

10

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

Batch size -just as every process has an economic batch quantity (EBQ) that must be
achieved before it can be considered economically viable, so too does specific
machinery.
A common approach is to compare different machines for a given batch size
using a break-even analysis to see which is most economic. when considering the
economics of process planning.
Capacity- as equally important as the EBQ is the production rate of the machines
under consideration. All machines are capable of achieving a particular output per
unit time. Therefore, parts must be assigned to machines capable of output that can

ww
match the MPS requirements.
Availability- this can be defined on two levels. The first definition is that of whether

w.E
the machine required is already being used or not, that is, is it available or

asy
unavailable. However, in terms of equipment effectiveness, availability can be
defined as the proportion of time a machine is actually available to perform work out

En
of the time it should be available.

gin
5. Explain the steps in process planning (16)

ee rin
The following are the steps involved in carrying out the process planning
manually. Past experience of process planners are used in arriving at the economical
manufacturing of the product.
g.n
The steps involved in process planning are :
(i)
et
The finished product is analyzed so that its sub-assemblies and individual
components are identified from manufacturing point of view.
(ii) Prepare a Bill Of Materials [BOM] for all components of the product which
forms a basis for purchase of raw materials.
(iii) Decide which parts are to be manufactured in the plant and which parts are to
be purchased from the market depending upon the facilities available in the
plant, i.e., decision with regard to “make” or “buy” to be taken.
(iv) Choose the appropriate blank size i.e., raw material size and select the most
economical process to be followed to manufacture components of the
11

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

product. This is done by comparing the various possible methods of obtaining

the final product. The basic factors of volume to be produced, i.e., production
quantity, required quality of the product and the capabilities of the equipment
available are carefully considered in this step.
(v) Decide the sequence of operations to be performed on each component in the
process selected.
(vi) Each operation is assigned to the type and size of machine or work station that
will perform the job most economically.
(vii) Depending upon the accuracies called for by the drawings, determine the

ww machine tools to do the operations

w.E
(viii) Determine the need for any special equipment like jigs, fixtures, cutting tools
etc.,
(ix)
asy
Determine the inspection stages and instruments required and the need for

En
designing any inspection devices (say gauges, etc.).
(x)

(xi) gin
Estimate the standard time for performing the job.
Determine the type of labour (skilled, semi-skilled or unskilled) required to do
the job.
ee rin
g.n
6. Write Down the procedure to be followed during material selection? Discuss the
factors that are taken into account in process Selection and equipment
selection.(16)
et
Material selection is done by the product designer considering the requirements of
the parts designed and the hardness, strength properties and other mechanical
characteristics of the material. Cost and availability of the material are also considered.
Material should be strong enough and at the same time manufacturing or producibility of
the part using the given material and the process are also equally important.
In the initial stages of design, the broad material groups such as ferrous or non-
ferrous or other non-metallic materials can be considered. At a later stage specific
material in the group can be identified.
In certain products or components specific properties of materials such as fatigue
strength, thermal conductivity, electrical properties like conductivity, magnetic
permeability and insulation resistance may have to be considered.
Material Selection parameters
(i) Functional requirements: The primary function of the part for which the material is
selected is the foremost consideration. A good knowledge of the product application is
12

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

important. The properties of materials which have a direct bearing on the functional
requirement of the part are: fatigue characteristics, strength, hardness, electrical and
thermal properties.
(ii) Reliability: Reliability of the materials refers to the consistency with which the
material will meet the entire products requirement throughout its service life. This is
important for trouble-free maintenance of the product during its life time.
(iii) Service life durability: The length of service (years or hours of operation of the
product) over which material is able to perform its function satisfactorily.
(iv) Aesthetics and appearance: Factors like colour, texture, lusture, smoothness and
finish play an important role in the aesthetics or appearance of the final product.
(v) Environmental Factors: Environmental factors such as temperature, humidity,
corrosive atmosphere affect the product and its performance. Hence proper materials
which can with stand such environmental effects should be selected and they should be

ww
given suitable protective coatings.
(vi) Compatibility with other materials during service: When one type of material is
used in combination with another type of material in a product or in an assembly the

w.E
properties of both types of materials should be compatible and should suit each other.
Otherwise deterioration in the performance of the product or assembly such as excessive
wear & tear, and corrosion of parts in fitment are likely to take place.
asy
(vii) Producibility or manufacturability: The extent to which the material can be
processed effectively and easily using a particular machine tool or process should also be

En
considered in the selection of the material. Machine ability of materials for machined
components is an important factor.

gin
(viii) Cost: The cost of material is a significant factor in many situations. The availability
of the material is equally important. Appropriate material for the product or component is

Process Selection Parameters

ee
to be selected taking into consideration all the above factors.

rin
g.n
There are several factors which govern the selection of a manufacturing process:
1. Shape requirements of the final product i.e., Geometric Form : Geometric

et
parameters such as solid shape, hollow shape, flat shape, flanged shape, concave shape,
convex shape, cylindrical shape, presence of any part feartures such as groove, threaded
shape, hole, chamfer, etc. are considered in the selection of a manufacturing process.
Each process has its own capabilities and limitations with respect to the production of the
above shapes and part features.
2. Size or Dimensional requirements : Some processes are capable of handling parts of
small sizes and some processes can handle large sized parts economically and effectively.
3. Tolerance requirements : Each manufacturing process has got its own capability with
regard to tolerance or accuracy of parts that can be produced using that process e.g.
grinding process always gives close tolerances when compared with turning process.
Depending upon the tolerance specified on the part drawing, suitable machining process
to be selected.
4. Surface finish requirements : Each manufacturing process has got its own capability
with regard to the surface finish which it can provide on the part machined, e.g. reaming
process can provide a better surface finish in a hole when compared with drilling process.
Similarly cylindrical grinding give a better surface finish, than a plain turning process.
13

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

Depending on the finish requirements specified on the component drawing, appropriate

machining process need to be selected.
5. Production volume requirements : The economics of any machining process
depends on the production volume, i.e., no. of components required on a weekly, monthly
or annual basis as the case may be. Existing order quantity as well as any anticipated
future orders and their quantity need to be considered in the process selection. Some of
the processes and additional cost incurred in the specialized toolings, jigs and fixtures can
be justified only when there is a large volume of production.
6. Material requirements : The hardness, and strength characteristics of the material
influence the tooling required. To machine hard and tough materials, carbide and ceramic
tools are required. If slender or thin materials are machined, proper work holding devices
and specially designed jigs and fixtures are required is order to avoid distortion and
bending of work pieces during machining. Thus material requirements of the part also

ww
influence the appropriate selection of machining process.

w.E
asy
En
gin
ee rin
g.n
et

14

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

UNIT-II
PROCESS PLANNING ACTIVITIES
Part-A (2 Marks)

1. What is Flow Chart?

Flow chart is one of the most commonly used for the collection and display
of manufacturing knowledge.
2. What are the disadvantages of flow charts?
1. Flow chart focus on process rather than on the structure of decision logic
2. Flow charts provide no check against incompleteness, contradiction and
redundancy.
3. Flow charts often employ abbreviations and hence they are defective for
effective communication of knowledge

ww
3. What is decision table?
Decision tables organize conditions, actions and decision rules in tabular

w.E
form. Conditions and actions are placed in rows while decision rules are identified
in columns. The upper part of the table includes the conditions that must be met in

asy
order for the actions (represented in the lower part of the table) to be taken. When
all conditions in a decision table are met, a decision is taken.

En
4. State the benefits of decision table?
Decision tables have a modular structure which allows them to be easily

gin
modified and written in array format.
Decision table ensure accuracy, eliminate redundancy, and avoid contradiction

byproduct. ee
Decision table provide knowledge structure and readable documentation as a

5. What are the tools for acquiring documentation knowledge? rin

 Decision trees.
 Decision tables. g.n
 Artificial intelligence based approach.
 Axiomatic approach.
6. What are the factors affecting speed feed and depth of cut?
et
 the workpiece material and geometry;
 the tool material and geometry;
 the processing time available as specified by production planning.
7. What is the use of quality assurance?
These are used to identify and reduce the seven wastes of production which are
overproduction, waiting, transporting, inappropriate processing, unnecessary
inventory, unnecessary motion and defects. These are equally of use to the process
planner not only in detailing the processes and operations, but also in establishing the
QA requirements for the plan.

15

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

8. List the classification of machining process

Machining processes involve the removal of material from the workpiece and there is
a variety of processes that fall into this category. These can be broken down further into
three broad sub-categories:
 cutting processes;
 abrasive processes;
 non-traditional machining processes

9. What costs are associated with manufacturing?

Various costs contribute towards the selling price of a finished product. These are
manufacturing costs, design/R&D costs, overheads (typically marketing, sales, customer
service and administration costs) and the profit margin.

10. What are the general instruction for work holding design and construction?

ww  physical characteristics of the workpiece;

 cutting forces involved;

w.E  machine selection;

 fixing method to machine;
 workholder-cutting tool relationship;

asy
 workpiece-cutting tool relationship.

En
11. List out the selection of machinery.
 Volume of production (Quantity to be produced) i.e., no. of components to
be produced.
gin
 Quality of finished product, and

doing the work. ee

 Advantages and disadvantages of the various types of equipment capable of

rin
12. What do you understand by the term operating sequence?
g.n
It consists of devising, selecting and specifying processes, machine tools and

et
other equipment to transform the raw material into finished product as per the
specifications called for by the drawings.

13. List the information required for process planning?

1. Quantity of work to be done along with product specifications.
2. Quality of work to be completed.
3. Availability of equipments, tools and personnels.
4. Sequence in which operations will be performed on the raw material.
5. Names of equipment on which the operations will be performed.
6. Standard time for each operation.

16

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

14. What are the parameters required for calculation of various production
processes?
Shape requirements of the final product
1. Size or dimensional requirements
2. Tolerance requirements
3. Surface finish requirements
4. Production volume requirements
5. Material requirements

Part-B (16 Marks)

1. Explain the Economics of process planning. (16)

Manufacturing costs play an important part in the successful design and manufacture

ww
of a product. Based on the model of added value, the manufacturing costs must be less

w.E
than the value added to allow a profit to be made. Therefore, the costing of the design and
manufacture of a product is vital in ensuring success. In addition, costs are very often

asy
used for making decisions for the design and manufacture of a product. The types of
decisions that can be made based on costs are:

En
 The type of material to be used for a product.

gin
 The type of manufacturing process to be used for a product.

ee
 How many of a product to manufacture.
 Whether to make or buy in a product/part.
rin
 The design of a product.
The aim is to introduce some of the economic aspects of process planning. g.n
 Identify the main costs in manufacturing and how they are used.
et
 select the most cost-effective material and process combination for a particular
component
 Calculate the total cost of a product.
 Compare the costs of process-material combinations using a break-even analysis.
 Use break-even analysis to help in the 'make or buy?' decision.
Financial information
Manufacturing organization use financial information and techniques, for three basic
purposes:

17

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

(i)Control
Financial information is used to help control the manufacturing system efficiently,
including the preparation of budgets and cost analysis. The manufacturing engineer
carries out a cost analysis during the process planning phase.
(ii)Decision making
Typical decisions to be made are about the type of manufacturing process to be
used, the quantity to be produced, whether to 'make or buy' a component and the type of
material to be used.
(iii)Reporting and recording

ww Involves the compilation and upkeep of financial records and statements such as
profit and loss accounts and for tax purposes and monthly management accounts

w.E
Cost elements of product selling price:
Various costs contribute towards the selling price of a finished product.
asy
These are manufacturing costs, design/R&D costs, overheads (typically marketing, sales,

En
and customer service and administration costs) and the profit margin.
Process plan:
gin
Throughout the analysis procedure, the planner will compile a manufacturing cost

ee
estimate for the product/component. These estimates must be made to allow management
to determine the potential profitability of a product.
rin
g.n
The main costs that the process planner is concerned with are those related to the

et
production costs and product volumes themselves. The accuracy of the process plan will
have a major influence on the organization's profit. If the planners estimate of the
manufacturing costs is accurate, the organization will make a profit on the financial
outlay.
In the case where the estimate of manufacturing costs is too high, the company
may decide to shelve production of a potentially profitable product. On the other hand, if
the estimate is too low, the company will end up producing a non-profit making product.
In either case, the company is closer to economic failure.

18

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

2. Explain the various quality assurance methods. (16)

Based on the capability of the process being employed, the process planner will
determine which are the most appropriate quality assurance (QA) tools and techniques to
employ. These will range from basic measurement tools such as calipers, micrometers
and gauges to the use of coordinate measuring machines (CMMs).
The process planner will have to liaise closely with the quality function on a
number of issues with regards to the process plan. These include:
 identifying inspection locations;
 identifying appropriate inspection and testing methods;

ww the frequency of inspection and testing;

 evaluation of inspection and test data;
w.E
 Identifying corrective action where appropriate.
.
Quality control: asy
En
Operations and activities focused on fulfilling quality requirements.
Quality assurance:
gin
Planned and systematic actions focused on providing confidence that quality

ee
requirements will be fulfilled. QA focuses on the prevention of errors that can cause non-
conforming products to be manufacturing.
rin
Quality management systems and principles:
g.n
and control an organization with regard to quality (ISO 9000).
The quality management system should have two objectives
et
A specific definition of a quality management system is: A management system to direct

 To define performance standards for all activities compatible with the products
being manufactured, the customer's requirements and doing so at minimum cost;
 To operate on the basis of continuous improvement to maintain a competitive
advantage.
A framework of eight quality management principles has been developed to enable
this continuous improvement for an organization:

19

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

(1)Customer focus
Recognizing that organizations rely upon customers for their success. Therefore,
organizations should Endeavour to understand their present needs and to anticipate their
future needs.
(2)Leadership
Helping to establish common objectives and direction for the organization. Proper
leadership should develop an organizational culture of involvement at different employee
levels to achieve the common objectives.
(3)Involvement of people

ww at all levels, not only in meeting the common objectives, but to help realize the
full potential of their abilities for the benefit of the organization.

w.E
(4)Process approach
Allows resources and operations to be managed more efficiently.
asy
(5) Systems approach to management

En
Which identifies and understands the complexity of the sub-systems and processes

gin
that interact within the organization, thus improving the organization's ability to meet its
objectives.

ee
(6)Continuous improvement of an organization's overall performance.

rin
This should not only be an objective of the quality management system, but also
be recognized as an organizational objective.
g.n
(7)Factual approach to decision-making
This allows effective decision-making based on the analysis of data and
information.
et
(8)Mutually beneficial supplier relationships
Recognizing the need to manage the supply chain to minimize waste and
maximize added value.
ISO 9000:2000:
The standard is based on the process based model of a quality management
system. This model identifies four major groups of generic processes that allow that
standard to be applied in any type of organization, namely management responsibility,
resource management, product realization and measurement, analysis and improvement.
20

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

The ISO 9000 family consists of three standards:

ISO 9000:2000 Quality management systems - Fundamentals & vocabulary.
This describes the fundamentals of, and defines the terminology for quality
Management systems..
ISO 9001:2000 Quality management systems- Requirements.
This specifies the requirements for a quality management system. It includes
models that help illustrate the structure and implementation of the standard.
ISO 9004:2000 Quality management systems- Guidelines for performance
Improvements.

ww One of the eight principles upon which the family of standards is based is
continuous improvement. This standard focuses on how an organization can assess its

w.E
effectiveness and the efficiency of the quality management system.

asy
3. What are the factors to be considered in the selection jigs and fixtures?

En
The special work holding requirements are generally satisfied by designing and

gin
building special-purpose work holding devices known as jigs and fixtures.
The main reasons for the use of jigs and fixtures are:

ee
 components can be produced quicker;

rin
 greater interchangeability is obtained due to repeatability of manufacture
which subsequently reduces assembly time;
g.n
 accuracy can be easily obtained and maintained;
 unskilled or semi-skilled labour may be used on a machine, resulting in et
reduced manufacturing costs.

Jigs
A jig is a work holding device. Jigs have a further important function and that is
determining the location dimensions of specific features. A jig is a specially designed
and built work holding device, usually made of metal, and performs three basic functions
 holding the component;
 providing guidance for the cutting tools to determine the location

21

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

dimension for the machining of a feature;

 positively locating the component so that subsequent components are
machined in the same manner.
Jigs can usually be generally classified as either drilling jigs or boring jigs and are
used for operations such as drilling, reaming, tapping, chamfering, counterboring,
countersinking and boring operations.
Fixture:
Fixture is similar to a jig and can be defined as a special-purpose work holding
device used during machining or assembly . Fixtures are generally of heavier

ww
construction than jigs and also usually fixed to the machine table. The main function of a
fixture is to positively locate the work piece . However, unlike a jig, no guidance is

w.E
provided for cutting tools. Fixtures are used in a variety of processes including milling,

asy
broaching, planning, grinding and turning.
Selection of jigs and fixtures:

En
The aim is to introduce the design and/or selection of work holding devices for particular
operations.
gin
 define and differentiate between a jig and a fixture in terms of their functionality;

ee
 select an appropriate type of‟ jig or fixture for a given component based on the
operations and processes specified for its manufacture; rin
g.n
 apply the basic principles of location and clamping for a given component;

et
 apply the basic principles of jig and fixture design and produce a general
arrangement drawing for a given component;
 Identify other types of work holders used in component manufacture.
Basic principles of jig and fixture design
The basic principles of jig and fixture design can be categorized under six Broad
headings:
 Location
 Clamping
 Clearance
 Stability And Rigidity

22

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

 Handling And Fixing

 Ease of construction and design.

4. What are the basic factors influencing process selection and write down the
process selection parameters?
Factors influencing process selection:
There are a number of factors common to both the material and
Process selection decisions:
 the number of components to be made;

ww the component size;

 the component weight;

w.E
 the precision required;

asy
 the surface finish and appearance required
The workability will also have a significant influence on

En
the quality of the part, where quality is defined by three factors ,
o freedom from defects;
gin
o surface finish;
ee rin
Dimensional accuracy and tolerances. General guidelines for process selection
some general guidelines can be applied for the selection of manufacturing processes.

g.n
 Select a process capable of providing the specified dimensional/ geometric
accuracy and surface finish.
et
 Specify the widest possible tolerances and surface finish variation for products to
allow the widest possible choice of manufacturing processes.
 Use prototypes as much as possible, taking into consideration the variation in
performance of methods used to manufacture a one-off compared with volume
manufacturing.
 Carry out a detailed comparison of candidate processes early in the design process,
paying particular attention to the variation in assembly costs for different
processes.
Process selection parameters:
The process selection method was developed to help undergraduates grasp the
complexity of process selection while providing them with a systematic method to
follow. Two basic assumptions are made in using this method. These are:
23

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

 the material has been selected first, as opposed to manufacturing processes first,
and specified at the design stage;
 all the information contained within the design documents, that is, drawings,
parts lists, etc. is comprehensive and that all information required for
manufactures can be derived during the drawing interpretation.

5. What are the set of documents required for process planning (16)
(i) Product design and the engineering drawings pertaining to all the components
of the product. (i.e., components drawings, specifications and a bill of
materials that defines how many of each component go into the product).

ww (ii) Machining/Machinability Data Handbook (Tables of cutting speeds, depth of

cut, feeds for different processes and for different work materials).

w.E
(iii) Catalogues of various cutting tools and tool inserts.
(iv)

machine tools asy

Specifications of various machine tools available in the shop/catalogues of
in the shop (speeds, feeds, capacity/power rating of motors,

En
spindle size, table sizes etc.).
(v)
gin
Sizes of standard materials commercially available in the market.
(vi)

(vii) Design Data Handbook. ee

Machine Hr. cost of all equipment available in the shop.

rin
(viii) Charts of Limits, Fits & Tolerances.
g.n
(ix)

(x)
processes.
Tables of standard cost.
et
Tables showing tolerances and surface finish obtainable for different machining

(xi) Table of allowances (such as Personal Allowance, Fatigue Allowance etc. in %

of standard time followed by the company).
(xii) Process plans of certain standard components such as shafts, bushings, flanges
etc.
(xiii) Handbooks (such as Tool Engineers Handbook, Design Data Handbook).

24

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

6. A large computer manufacturer requires 1200 printed circuit board (PCB)

carriers every month for the production of the PCBs themselves. Within their tool
oom, they have a variety of machining processes available and the carriers are
roduced on a conventional milling machine. The following information relates to the
CB carrier manufacture: However, it has been decided to investigate if there is any
significant cost advantage of producing these on a CNC milling machine. Determine
which machine is the most suitable for producing the PCB carriers at the current
rate of 1200 per month.

ww
w.E
asy
En
gin
ee rin
g.n
et

25

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et
Cost Comparison represented on a break-even chart

7. What is inspection? Write briefly about the different method of inspection

followed in industries?
Based on the process sequence outlined in Section 10.6.4, there are a number
of basic decisions to be made with regards to the inspection required for the
manufacture of the component. These are primarily:
 The type of inspection
 The inspection locations
 The inspection methods
26

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

 The measurement instruments or methods required.

Although the process plan will specify the above, ultimately the detail design
of the quality assurance regime will be the responsibility of the quality engineer.
Inspection methods
The inspection method employed will be heavily influenced by the inspection location.
Hundred per cent inspection
As the name suggests, this involves the inspection of every single unit in a batch. It is
ommon in many situations, particularly for output inspection, as it is considered the only
ay of guaranteeing all defects being identified. It is always used on critical parts where
afety is paramount, that is, aerospace engine components, nuclear plant components, etc.
However, it is time consuming and fatigue can cause loss of operator concentration and
herefore errors. Errors such as these that may occur at the end of a shift can be as high as
15 per cent (Timings, 1993).

ww
'Gate' sample inspection
This involves splitting production output into inspection lots. The basic assumption is
that each inspection lot is subject only to normal variation. How the inspection lot is

w.E
etermined will depend on:
 The uniformity of the process
 The ability to have truly random samples.
asy
After each lot is finished, it is sampled. Any part of the lot can be sampled and has to
wait at the 'gate' until the sampling inspection is complete. Based on the results of the

En
sampling inspection the entire lot will proceed or be rejected, following which it will be

gin
100 per cent inspected. This inspection method is used for output inspection or final
inspection, usually in conjunction with patrol inspection.
Patrol inspection

ee
In this inspection method samples are taken at a fixed times. This is particularly useful at

rin
the beginning and end of a shift and when a machine set-up has changed. Therefore, it is
ideal for process inspection. The only drawback is that problems may occur between
inspection sampling.
First-off inspection g.n
et
This simply entails inspecting the first part produced after a new set-up to ensure that the
set-up is correct. It is carded out and if the set-up is satisfactory, production commences.
It is, therefore, suitable for process inspection.
Statistical process control
This has already been detailed earlier in the chapter and provides the means of controlling
the process and not just the product.
Statistical sampling
This method of inspection relies on there being a specified quality level known as an
acceptable quality level (AQL). This can be defined as the worst level of quality for a
process considered acceptable by a customer and specified as a process mean (Messina,
1987). Using a sound statistical sampling method can be an effective means of
monitoring the AQL.

27

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

UNIT-III
INTRODUCTION TO COST ESTIMATION
Part-A (2 Marks)

1. Write the importance of cost estimating?

 Cost estimates help to fix the selling price of a product.
 It helps the manufacturer to choose from the various production methods.
 It helps to establish the standard performance.
 Helps to predict before the start of production.

1. What are the functions of cost estimation?

Cost estimates are required to submit accurate tenders. For getting the contracts.
 Cost estimates are required for the manufacturer to choose from various methods

ww of production the one which is likely to be most economical.

 Cost estimates are required for fixing the selling price of a product.
 Cost estimate gives detailed information of all the operations and their costs, thus
w.Esetting a standard to be achieved in actual practice.
 Cost estimate enables the management to plan for procurement of raw materials,

asy
tools, etc., and to arrange the necessary capital, as it gives detailed requirement.

3. What are aims of costing?

The main aims of costing are
En
gin
1 Cost determination: To determine the actual cost of each component and cost of the
final product.

ee
2 For fixing selling price: To provide information to ascertain e selling price of the
product.

rin
3. Cost control - To analyse the expenses incurred in production, that control can be kept
over them.

4. Define Cost Estimation g.n

et
Cost estimating may be defined as the process of forecasting the expenses that
must be incurred to manufacture a product. These expenses take into consideration all
expenditures involved in design and manufacturing with all the related service facilities
such as pattern making tool making, as well as a portion of the general administrative and
selling costs.

5. Define Job Costing or Batch Costing.

This method is concerned with finding the cost of each individual job or
contract.In this method, the total cost for each order is obtained from the daily cost sheet.
This method is adopted in job order industries such as ship building, machine
manufacturing, fabrication, building contracts, etc.

6. What you mean by Process Costing?

1. This method is employed' when a standard product is made which involves a number
of distinct processes performed in a definite sequence.
28

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

2. This method is adopted in industries such as oil refining, chemical, paper making,
paint, cement manufacturing and other similar industries.
3.This method indicates the cost of a product at different stages as it passes through
various operations or processes. or departments

7. Define Unit Cost Method

This method is adopted by the firms, which supply a uniform product rather than a
variety of products such as mines, quarries, etc.

8 . Define Multiple Cost Method

This method is used in firms which manufacture variety of standardised products,
having no relation to one another in cost, quality and the type of.process, etc.

ww
9. Define Design Cost?
The cost of design of a. product is estimated by ascertaining the expected time for
the design of that product.

w.E
Estimated design cost = Estimated design time x Salary of designer per unit time.
The design time can be estimated on the basis of similar products already designed
in the past or on the basis of good judgement of designer.
asy
If the design of the product is done by some outside agency, the total amount paid to
outside agency gives the cost of design.

En
10. List the types of estimates.
1. Conceptual design,
2. Preliminary design, and gin
3. Detailed design.

11. Define Direct Expenses.

ee rin
g.n
Direct expenses are those which can be charged directly to a particular job and are done
for that specific job only. Direct expenses are also known as 'chargeable expenses'.

Examples of direct expenses are et

 Cost of preparing designs, drawings for the manufacture of a particular product.
 Cost of experimental work done specifically for a particular product.
 Cost of procuring or manufacturing special types of jigsand fixtures for the
manufacture of a particular product.
 Cost of hiring special types of patterns, moulding flasks,dies, etc.
 Cost of consultancy charges for design and manufacture of a specific product.

12. Define Indirect Expenses.

Indirect expenses are those which cannot be charged directly to a particular
product manufactured.
All expenses other than the direct material cost direct labour cost and direct
expenses are indirect expenses. „Indirect expenses are also known as 'Overhead charges"
'On cost and 'Burden'.
29

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

13. What do you mean by depreciation?

Depreciation is defined as the reduction in the value of an asset, machinery,
equipment or building with passage of time due to various reasons, such as wear and
tear, and obsolescence. Whether we use the machine or not its value is decreasing with
passage of time. Depreciation is computed and accounted for in calculating the hourly
cost of running and maintenance of machines.

14. Define cost accounting.

Costing or cost accounting means classifying, recording and allocating the
appropriate expenditure for determining the cost of production and achieved by keeping
a continuous record of all the costs involved in manufacturing.

15. What is target cost?

ww When the cost estimate is to be used as a goal, i.e., target cost to be achieved in
production, it should be set on lower side than the actual estimated cost. The factory is

w.E
more likely to try to meet a low cost target than to try to get costs down very far below an
overestimated target cost.

16. What is under estimate?

asy
Estimated cost is below the actual cost of product, means a financial loss to the

En
firm and too many losses mean failure or closure of the shop.

gin
17. What is conceptual cost estimating?
It is estimating during the conceptual design stage. In the conceptual design stage,

ee
the geometry of parts and materials have not been specified, unless they dictate essential
product functions. In the conceptual design stage, the costs associated with a change in
the design are low.
rin
18. Write any two objectives of cost estimation.
 It gives an indication to the manufacturer whether the g.n
project to be undertaken will be economical or not.
 It enables the manufacturer to choose from various methods of
production.
et
 It enables the manufacturer to fix the selling price (sales price) of the
product in advance of actual production.
 It helps in taking decisions to make or to buy.

19. Give the methods of costing.

 Job Costing method
 Batch Costing method
 Operating Cost method
 Process Costing method
 Departmental Costing method

30

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

20. What shall be the effect of over estimate?

The estimated cost is much above the actual cost of the product, the shop or firm
will not be able to compete with its competitors who have estimated the price correctly
and lose the order to its competitors.

21. Define Over Head Cost?

The indirect costs or fixed expenses of operating a business (that is, the costs not
directly related to the manufacture of a product or delivery of a service) that range from
rent to administrative costs to marketing costs. Overhead refers to all non-labor expenses
required to operate your business.

ww Part-B (16 Marks)

w.E
1. Name the various elements of cost. Explain each element in detail.

The total cost is made up of three main elements.

(16)

1. Material.
3. Expenses. asy 2. Labour.
4. Overhead.
MATERIAL COST
En
Material cost consists of the cost of materials which are used in the manufacture

gin
of product. It is divided into the following:
(i)Direct Material Cost

ee
It is the cost of those materials which are directly used for the manufacture of the

rin
product and become a part of the finished product. This expenditure can be directly
allocated and charged to the manufacture of a specific product or job and includes the
scrap and waste that has been cut away from original bar or casting.
g.n
The procedure for calculating the direct material cost is as follows:
(ii)Indirect Material Cost
et
In addition to direct materials a number of other materials are necessary to help in
the conversion of direct materials into final shape. Though these materials are
consumed in the production, they don‟t become part of the finished product and their
cost cannot be directly booked to the manufacture of a specific product. Such materials
are called indirect materials.
The indirect materials include oils, general tools, greases, sand papers, coolants,
cotton waste etc. The cost associated with indirect materials is called indirect material
cost.

LABOUR COST
It is the expenditure made on the salaries, wages, overtime, bonuses, etc. of the
employees of the enterprise. It can be classified as

31

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

(i).Direct Labour Cost

Direct labourer is one who actually works and processes the materials to convert
it into the final shape. The cost associated with direct labour is called direct labour
cost.
Examples of the direct labour are the workers operating lathes, milling machines
or welders, or assemblers in assembly shop. The direct labour cost may be allocated
to a product or job on the basis of time spent by a worker on a job.
(ii).indirect Labour Cost
Indirect are the non productive staff who helps the productive labour in performing
their dities.
Indirect labour cost cannot be charged directly to particular job, but are charged on
the number of products produced in the plant during a particular period.
Examples: supervisors, inspectors, store keeper, etc

ww
.
EXPENSES
Except for direct material and direct labour cost, all other expenditures are

w.E
known as expenses. The expenses include indirect material cost and indirect cost
and such other expenses.
(i)Direct Expenses
asy
Direct expenses also known as chargeable expenses include any expenditure other

En
than direct material or direct labour incurred on a specific cost unit. These are the

gin
expenses which can be charged directly to a particular job and are done for that
specific job only.

ee
Example special tools and equipment cost of special jigs and fixtures or some
special patterns and its maintenance cost, costs of layouts, designs and drawings or
experimental work on a particular job etc.
rin
Indirect Expenses
g.n
These are known as overhead charges, burden or on cost. All the expenses over

et
and above prime cost are indirect expenses. Overhead is the sum of indirect labour
cost, indirect material cost and other expenses including service which cannot be
conveniently charged to specific cost unit. These can be further classified as
1. Production expenses/Factory expenses.
2. Administrative expenses.
3. Selling expenses.
4. Distribution expenses.

32

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

2. Explain the procedure involved in cost estimation (16)

Step 1.Study the cost estimation request thoroughly and understand it completely.

Step 2.Analyse the product and decide the requirement and specification of the product.

Step 3.Prepare the list of all the parts of the product and their bill of materials.

Step 4.Take make or buy decisions and prepare separate list of parts to be manufactured
within the plant and parts to be purchased outside of the plant.

Step 5.Estimate the materials cost for the parts to be manufactured in the plant.

Material cost = weight of the material × material cost per unit weight.

ww
Step 6.Determine the cost of parts to be purchased from outside.

w.E
Step 7.Make a manufacturing process plan for the parts to be manufactured in the plant.

Step 8. Estimate the machining time for the each operation listed in the manufacturing
process plan.
asy
En
Step 9.Determine the direct labour cost.

gin
Direct labour cost = total operation time × labour wege time.

direct labour cost.

ee
Step10. Determine the prime cost by adding direct expenses, direct material cost, and

rin
Prime cost = direct labour cost+ direct material cost + direct expenses.

g.n
Step 11. Estimate the factory overheads, which include all indirect expenditure incurred

et
during production such as indirect material cost, indirect labour cost, depreciation and
expenditure on maintenance of the plant, machinery, power,etc

Step12. Estimate the administrative expenses.

Step13.Estimate the selling and distribution expenses, which include packing and
delivery charges, advertisement charges,etc.

Step 14. Calculate the total cost of product.

Total cost=prime cost + factory overheads +administrative expenses + selling and

distribution expenses.

Step 15. Decide the profit and add the profit to the total cost to fix the selling price of the
part.

33

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

Selling price = total cost + profit

Step 16. Finally estimate the time of delivery in insulation with the production and sales
department.

3. Write short notes on cost allowances in estimation. (8)

1. Miscellaneous Allowances
Allowance is the additional time allowed to perform the work over and above the basic
time.to obtain the standard time a proper allowances must be added depending upon the

ww
work conditions
Standard time = basic time + allowance

w.E
2. Personal allowance
They are provide to the worker to fill his / her personal needs such as washing

asy
hands, going to the lavatory, getting water, tea, coffee, etc

En
They are taken usually taken as 5% for male and 7% for female worker of the total
working time.
3.Fatigue allowance gin
ee
They are intended to provide a workman an opportunity to recover from

rin
physiological and psychological effects of fatigue caused by carrying out a specified task
under specified conditions
g.n
Fatigue may be due to the excessive work, repeated work, poor lighting, poor
ventilation, machine noises, visual and mental strain, etc
Generally 5% of the total time is considered as fatigue allowance.
et
4.Contingency allowance
These allowances are providing for small unavailable delays as well as for occasional and
minor extra work.
Some of these occurrences are : tool breakage, tool sharpening, tool replacing, filling
coolant reservoirs, power failure , etc
They are usually less than 5% of the total time.
5.Interference allowance

34

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

This allowances is provided when two or more work elements occur

simultaneously.
6.Process allowance
Provided for compensate for enforced idleness during a process
it includes loss of time due to i) no work ii) power failure iii) faulty material iv)
faulty tools and equipments
7.Contingency allowance
Allowance of time to meet legitimate, irregular and infrequent items of work or
delays

ww It can‟t be economically measured correctly

it is taken less than 5%

w.E
8.Special Allowance
These allowances are provided for activities which are not normally a part of the
asy
operation cycle, but they are essential for satisfactory performance of the work.

En
It includes for the following items

gin
1) Startup 2) Cleaning 3) Shutdown 4) Setup 5) Changeover
6) Tools allowance

ee
4. List and discuss the different methods of costing rin (16)

METHODS OF COSTING g.n

Process costing.
Job costing. et
Batch costing.
Departmental costing
Operating cost method
Unit cost method
Multiple cost method

(a) Process costing

This method is employed when a standard product is being made which involves a
number of distinct processes performed in a definite sequence.
35

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

The total time spent and materials used on each process, as well as services such as
power, light and heating are all charged. For this purpose cost sheet may be employed.
This method is adopted in industries such as oil refining, chemical, papermaking, paint,
cement manufacturing and other similar industries.
Example : grinding the raw material, burning, cooling and grinding.
(b) Job costing or order costing
Job costing is concerned with finding the cost of each individual job or contract.
Examples :general (job order) engineering industries, ship building, building contracts, etc.
The main features of the system is that each job has to be planned and costed
separately. Overhead costs may be absorbed on jobs on the basis of actual costs
incurred or on predetermined costs.
It involves consideration of the following factors for each job/order:

ww 1. Materials requirements and prices to arrive at the direct material cost.

2. Labour hours and rates to determine labour costs.
3. Overhead costs.

w.E 4. Percentage added to total cost to cover profit.

(c) Batch costing

asy
Batch costing is a form of job costing. Instead of costing each component separately,
each batch of components are taken together and treated as a job.

En
example, if 100 units of a component, say a reflector are to be manufactured, then the
costing would be as far a single job.

gin
This methods is adopted in job order industries such as ship building, machine
manufacturing, fabrication, etc
(d) Departmental costing
ee rin
This method is adopted in determining the cost of the output of each department
separately for the manufacturer of the standardized.
(e) Operating cost method
g.n
This method is used firms providing utility services.
Example transport service, water works, electricity board, railways etc
(f) Unit cost method
et
This method is adopted by the firms, which supply a uniform products rather than
a variety of products such as mines, quarries etc
(g) Multiple cost method
It is used in firms which manufacture variety of standardized products, having no
relation to one another in cost, quality and the type of process etc

36

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

5. Briefly explain the allocation of overheads? (16)

In industries producing single product the total overhead costs may be simply divided by
the number of items produced.

Some important methods of allocation of overhead costs :

1. Allocation by cost proportion.
2. Allocation by hourly rate.
3. Allocation by unit rate.
1. Allocation by Cost Proportion
This method is sub-divided into three categories :
Proportional to prime cost :
In this method the total overhead costs of the industry are expressed as a fraction

ww
or percentage of the prime cost. This percentage multiplied by the prime cost of
individual item gives the part of total overheads to be allocated to that item of

w.E
manufacture. The formula for calculating the percentage of overheads is
Percentage of overheads = TOTAL OVERHEAD COST X 100
TOTAL PRIME COST

asy
Proportional to direct labour cost :
In this method the percentage of overhead costs to be allocated is given by

En
Percentage of overheads = TOTAL OVERHEAD COST
TOTAL DIRECT LABOUR COST
X 100

gin
Allocation proportional to direct material cost :
According to this method, the percentage of overhead cost equals the total

Percentage of overheads = ee
overhead cost of the factory expressed as a fraction of the total direct material costs
TOTAL OVERHEAD COST
×100
TOTAL DIRECT MATERIAL COST
rin
X 100

2.Allocation by Hourly Rate

This method is again sub-divided into two categories : g.n
By man-hour rate :
et
The rate of overhead is obtained by dividing the total overhead costs by the
total production man-hours worked during that period.
TOTAL OVERHEAD COST FOR THE ENTIRE FACTORY
Rate of overhead =
TOTAL PRODUCTION ON MAN HOURS EMPLOYED
By machine hour rate :
In this method the overhead costs are allocated on the basis of fraction of the
time used on particular machine in the manufacture of an item

OVERHEAD EXPENSES FOR SPECIFIC MACHINE

Rate of overhead per machine-hour =
NO OF MACHINE HOURS

37

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

3.Allocation by Unit Rate

In this method of allocation of overhead costs, it is assumed that the overhead
expenses are proportional to the total output
TOTAL OVERHEAD CHARGES FOR ENTIRE FACTORY
Overheads costs/unit produced =
NO OF UNIT PRODUCED

6. What is cost estimating . State the objectives of cost estimating (08)

OBJECTIVES OR PURPOSE OF ESTIMATING
The main purpose or objective of estimating are
 To establish the selling price of a product for a quotation or contract, so as to
ensure reasonable profit to the company.

ww  Verify quotation submitted by vendors.

 To ascertain whether a proposed product can be manufactured and marketed

w.E profitably.
 To determine how much must be invested in equipment.

asy
 To find whether parts or assemblies can be more cheaply fabricated or
purchased from outside (make or buy decision).

En
 To determine the most economical process, tooling or material for making a
product.

gin
 To establish a standard of performance at the start of project.
 For feasibility studies on possible new products.

 To prepare production budget.

ee
 To assist in long term financial planning.
rin
 To help in responding to tender enquiries.
 To evaluate alternate designs of a product. g.n
 To set a standard estimate of costs.
et
 To initiate programs of cost reduction that result in economics due to the use
of new materials, which produce lower scrap losses and which create savings
due to revisions in methods of tooling and processing, and
 To control actual operating costs by incorporating these estimates into the
general plan of cost accounting.

7. Explain the various types of estimation. (16)

TYPES OF ESTIMATE
Estimates can be developed in a variety of different ways depending upon the use of
the estimates and the amount of detail provided to the estimator.
Importance of understanding estimating methods. Every estimator should

38

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

understand every estimating method and when to apply each, because no one
estimating method will solve all estimating problems.
(1)Guesstimates
Guesstimates are a slang term used to describe as estimate than lacks detail. This
type of estimate relies on the estimators experience and judgment. There are many
reasons why some estimates are developed using his method.
(2)Budgetary
The budgetary estimate can also be a guesstimate but is used for a different
purpose. The budgetary estimate is used for planning the cost of a piece part, assembly,
or project. This type of estimate is typically on the high side because the estimator
understands that a low estimate could create real problems.
(3)Using Past History

ww Using past history is a very popular way of developing estimates for new work.
Some companies go to great lengths to ensure that estimates are developed in the same

w.E
way actual cost is conducted. This provides a way past history in developing new
estimates. New advancements in group technology now provide a way for the

asy
microcomputer to assist in this effort.
(4)Estimating in Some Detail

En
Some estimators vary the amount of detail in an estimate depending on the risk
and dollar amount of the estimate. This is true in most contract shops. This level of

gin
detail might be at the operation level where operation 10 might be a turning operation
and the estimator would estimate the setup time at 0.5 hours and the run time at 5.00

estimating error. ee
minutes. The material part of the estimate is usually calculated out in detail to reduce

rin
(5)Estimating in Complete Detail
g.n
When the risk of being wrong is high or the dollar amount of the estimate is high,

estimates for machinery operations

et
the estimator will develop the estimate in as much detail as possible. Detailed

Example: calculations for speeds, feeds, cutting times, load and unload times and
even machine manipulations factors. These time values are calculated as standard time
and adjusted with an efficiency factor to predict actual performance.

(6)Parametric Estimating
Parametric estimating is an estimating method developed and used by trade
associations. New housing constructions can be estimated on the basis of cost per
square. There would be different figures for wood construction as compared with brick
and for single strong construction as compared with multilevel construction.
(7)Project Estimating
Project estimating is by far the most complex of all estimating tasks. This is
especially true if the project is a lengthy one. A good example of project estimating is
39

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

the time and cost of developing a new missile. The project might take 5 years and cost
millions of dollars. The actual manufacturing cost of the missile might be a fraction of
the total cost. Major projects of this nature will have a PERT network to keep track of
the many complexities of the project. A team of people with a project leader is
usually required to develop a project estimate.

8. From the following data for a sewing machine manufacturer, prepare a statement
showing prime cost, works/factory cost, production cost and profit. (16)

Rs

Value of stock of material as on 01-04-2003 26,000

ww
Material purchased 2, 74,000

w.E
Wages to labour

Depreciation of plant and machinery

1,20,000

8,000

asy
Depreciation of office equipment 2,000

En
Rent, taxes and insurance of factory 16,000

General administrative expenses

gin 3400

ee
Water, power and telephone bills factory

Water, lighting and telephone bills of office

9,600

2500
rin
Material transportation in factory 2000
g.n
Insurance and rent of office building

Direct expenses
2000

5000
et
Commission and pay of salesman 10,000

Repair and maintenance of plant 1000

Works manager salary 30,000

Salary of office staff 60,000

Value of stock of material as on 31/03/2004 36,000

Sale of products 6,36,000

Solution
40

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

i. material cost = opening stock value + material purchases – closing balance

= 26,000 + 2,74,000 – 36000

= Rs 2,64,000.

Prime cost = direct material cost + direct labour cost + direct expenses

= 2,64,000 + 1,20,000 + 5,000

= Rs 3,89,000.
ii. Factory overheads are
Rs
Rent, taxes and insurance of factory 16,000

ww Depreciation of plant and machinery 8,000

w.E Water ,power and telephone bills factory

Material transportation in factory

9,600

2000
asy
Repair and maintenance of plant 1000

Works manager salary En 30,000

gin --------------------------------

ee
Factory overheads or factory cost

Factory cost = prime cost + Factory expenses rin

66,600.

= 3,89,000 + 59,500 g.n

= Rs 4,48,500.

iii. Administrative / office expenses are:

et
Depreciation of office equipment 2,000

General administrative expenses 3400

Water, lighting and telephone bills of office 2500

Insurance and rent of office building 2000

Salary of office staff 60,000

---------------
Total 69,900.

41

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

Production cost = factory cost + office expenses

= Rs 4,55,600 + Rs 69,900

= Rs 5,25,500.

iv. Selling overheads are

Commission and pay to salesman = Rs 10,500.

Total cost = production cost + selling expenses

= 5,25,500 + 10,500

ww = Rs 5,36,000.

v.
w.E Profit = sales – total cost

= 6.36.000 – 5,36,000

asy = Rs 1,00,000.

En
9. Explain any one method of calculating depreciation Cost with an example.
Unit of Production method
gin
This is a two-step process, unlike straight line method. Here, equal expense rates

ee
are assigned to each unit produced. This assignment makes the method very useful in
assembly for production lines. Hence, the calculation is based on output capability of
the asset rather than the number of years.
rin
The steps are:
Step 1: Calculate per unit depreciation: g.n
production
Step 2: Calculate the total depreciation of actual units produced:
et
Per unit Depreciation = (Asset cost – Residual value) / Useful life in units of

Total Depreciation Expense = Per Unit Depreciation * Units Produced

Example: ABC company purchases a printing press to print flyers for Rs. 40,000 with
a useful life of 1,80,000 units and residual value of Rs. 4000. It prints 4000 flyers.
Step 1: Per unit Depreciation = (40,000-4000)/180,000 = Rs. 0.2
Step 2: Total Depreciation expense = Rs. 0.2 * 4000 flyers = Rs. 800
So the total Depreciation expense is Rs. 800 which is accounted. Once the per unit
depreciation is found out, it can be applied to future output runs.

42

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

UNIT-IV
(PRODUCTION COST ESTIMATION)
Part-A (2 Marks)

1. Define Machine or Upset Forging

In upset forging, the cross section of the metal is increased with a corresponding
reduction in its length. This method is used for making gear blanks, shafts, axles and
similar parts.

2. Write the forging operations.

1. Upsetting
2. Drawing Down (Fullering)
3. Setting Down

ww 4. Bending
5. punching
6. Drifting

w.E7. Swaging

asy
3. Define Shear Loss
The blank required for forging a component is cut from billets or long bars, by
means of, a sawing machine. During sawing, the material equal to the product of

En
thickness of sawing blade and cross-section of bar is lost for each cut. This material loss
is known as shear loss..

4. Define Tonghold Loss gin

ee
While performing some forging operations, some length of the stock (at one end)

rin
is required for holding the stock in tong. This small extra length will be removed after
completion of the workpiece. These losses known as tonghold loss Therefore this

g.n
tonghold loss should be added while calculating the required stock material. Length of
tonghold is generally taken as 2 to 2.5 cm of the stock length.

5. Define Scale Loss et

At high temperature during the forging processes, the oxidation of the outer
surface of the workpiece will take place. That is, the heated workpiece reacts, with
oxygen from air forms a thin film of iron oxide on the outer surface of the wokpiece. This
thin film of iron oxide is called scale. When hammering is done, the scale is broken and
falls down as a waste. This material waste is known as scale loss. Generally scale loss is
taken as 6% of the net weight

6.Define Flash Loss

When dies are used for forging, certain quantity of material comes out of the die at
the parting line of the top and bottom halves of the die. This surplus wastage material is
called flash. Flash is generally taken as 20 mm wide and 3 mm thick.

43

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

7. Define Sprue Loss

The portion of metal between the length held in the tong (i.e., tonghold) and the
material in the die is called sprue or runner. This is cut off when workpiece is completed.
The material loss due to this portion of the material used as a contact is called sprue loss.
The sprue must be heavy enough to permit lifting the workpiece out of the impression die
without bending. The sprue loss is generally taken as 7% of the net weight.

8. What is unit rate?

This is also known as production unit basis method. In this, on-cost is allocated on
the basis of unit of production. Unit of production is generally piece, kilogram, tonne,
litres, metre, etc. This method is mostly used where only one type of production is carried
out. This method cannot be used in factories, where different kinds of products are
manufactured. Unit rate is the overheads for one unit.

ww
9. What is shrinkage allowance?
Almost all metals contract during cooling at different rates. The shrinkage is

w.E
volumetric which affects the dimensions all around the casting.

asy
10. Define man hour and machine hour rate.

En
gin
ee
11.List out the material losses in forging.
 Shear Loss rin
 Tonghold Loss
 Scale Loss g.n
 Flash Loss
 Sprue Loss et
12.Define Inadequacy.
Sometimes the existing machine is functioning well, but it is not capable to cope-
up with the increased demand. Because of the increased demand, that particular machine
becomes inadequate. For example, an existing pit furnace replaced by a cupola fumace to
meet the increased demand. Therefore additional money, should be spent either to replace
the machine or to install more similar size machines. This type of depreciation where a
machine is to be replaced while it is functioning is known as depreciation by inadequacy

44

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

13.Brief about the procedure for calculating material cost.

Cost of material required for casting is calculated as follows :
(i) From the component drawing, calculate the volume of material required
for casting. This volume multiplied by density of material gives the net
weight of the casting.
(ii) Add the weight of process scrap i.e. weight of runners, gates and risers
and other material consumed as a part of process in getting the casting.
(iii) Add the allowance for metal loss in oxidation in furnace, in cutting the
gates and runners and over runs etc.

14. Define Production Cost.

ww Production cost refers to the cost incurred by a business when manufacturing a

good or providing a service. Production costs include a variety of expenses including, but

w.E
not limited to, labor, raw materials, consumable manufacturing supplies and general
overhead.

asy
15. Differentiate Rightward and leftward welding.

En
The leftward method of welding is also known as forward welding. It is the oldest

gin
and most widely established method for the butt-welding of steel plates. Welding is
commenced at the right hand edge of the plate and proceeds across the plane in a leftward

ee
direction, the blowpipe following the welding rod.

rin
The rightward method of welding consists of commencing at the left-hand side of

g.n
the plate and proceeding towards the right, the filler rod following the blowpipe.

et

45

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

Part-B (16 Marks)

ww
w.E
asy
En
gin
ee rin
g.n
et

46

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

47

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

48

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

49

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

50

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

51

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

52

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

53

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

54

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

55

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

56

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

57

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
6. Losses in Forging.(8)
En
Certain amount of material is lost during different forging operations. The exact

gin
estimation of losses is very difficult, but by practical experience, the losses can be
calculated during forging as accurate as possible. Various losses in forging are:

ee
(i) Tong Loss: While performing forging operations, some length of stock is required for
holding the job in tong. This length is an extra length, which is removed after completion

rin
of the job. For estimation purposes, the weight of the extra length is also considered and
is known as Tong loss. 2 to 3 cm of the stock length.

g.n
(ii) Scale Loss: The outer surface of the hot metal is generally oxidized, and when
hammering is done oxidized film is broken and falls down in the form of scale. It reduces

purposes. Generally, it is taken as 6% of the net weight. et

the dimensions of the job, and therefore, this loss must be considered for estimation

(iii) Flash Loss: It is the surplus metal, which comes out between the two meeting
surfaces of the dies. For getting finished product, this surplus metal is required to be
trimmed off.
This loss may be calculated by assuming it to be 20mm wide and 3mm thick all around
the periphery of the dies.
Thus, volume of flash loss = periphery x 20x 3 cu mm nearly.
(iv) Shear Loss: The required sizes of workpiece for forging operations are obtained from
long bars by sawing or shearing. In sawing operation, some material is always lost. If last
piece of bar is not to be required length, it is rejected. This loss of material is taken as 5%
of the net weight.
(v) Sprue Loss: The portion of metal between the length held in the tong and the material
in the die is called sprue. This is also a metal loss and can be taken as 7% of the weight.

58

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

UNIT-V
(MACHINING TIME CALCULATION)
Part-A (2 Marks)

1. What are the elements of machining time?

 Set-up time,
 Handling time,
 Machining time,
 Tear down time,
 Down time, and
 Allowances.

ww2. List the allowances in machining time.

 Personal allowance
 Fatigue

w.E Inspection or Checking allowance

 Tool sharpening/Tool change allowance
 Other allowances
3. What is setup time?asy
En
This is the time taken to prepare the machine for operation. The set-up time
includes the time taken to :
gin
(i) Study the component drawing.

ee
(ii) Draw tools from tool crib, and

rin
(iii) Install and adjust the tools, jigs and fixtures on the machine.

4. What is machining time? g.n

et
It is the time for which the machine works on the component, i.e. from the time
when the tool touches the work piece to when the tool leaves the component after
completion of operation. The machining time depends on the type and extent of
machining required, material being machined, speed, feed, depth of cut and number of
cuts required.

5. What is unit operation time?

The sum of handling time and machining time for a job is called operation time.
It is the duration of time that elapses between output of two consecutive units of
production. It is also called cycle time.

59

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

6. What is tear down time?

It is the time taken to remove the tools, jigs and fixtures from the machine and to
clean the machine and tools after the operation has been done on the last
component of batch. The tear down time is usually small. The tear down time
occurs only once for a complete lot or batch taken for machining. Standard data
are available for tear down time for various machines.

7. What is down time?

It is the time wasted by the operator due to breakdowns, non-availability or delay

in supply of tools and materials etc.

ww
8. Enumerate the estimation in milling and list the operations done on a milling

w.E
machine.

Milling machine is a very versatile machine. The milling machine employs a

asy
multipoint tool, called milling cutter, for machining. The various operations done
on a milling machine include facing, forming or profile machining, slotting, key
way cutting, etc.
En
In milling machine, the formula to calculate machining time is :

gin
ee rin
9. List the process parameters for lathe.
g.n



Length of cut
Feed
Depth of cut
et
 Cutting speed

10. Define Cutting Speed.

Cutting speed is the speed at which the cutting edge of tool passes over the job and
it is usually expressed in meters per minute. The cutting speed depends on the
cutting tool material, the work piece material and the operation.

60

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

Part-B (16 Marks)

ww
w.E
asy
En
gin
ee rin
g.n
et

61

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

62

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

63

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

64

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

65

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

66

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

67

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

68

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

69

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

70

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

71

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

72

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

73

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

74

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

75

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

76

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

77

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

78

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

79

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

80

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

81

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

82

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

83

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
asy
En
gin
ee rin
g.n
et

84

Downloaded From : www.EasyEngineering.net

 Downloaded From : www.EasyEngineering.net

ww
w.E
a syE
ngi
nee
rin
g.n
et

**Note: Other Websites/Blogs Owners Please do not Copy (or) Republish

this Materials without Legal Permission of the Publishers.

**Disclimers : EasyEngineering not the original publisher of this Book/Material

on net. This e-book/Material has been collected from other sources of net.
Downloaded From : www.EasyEngineering.net