Scribd
Upload
25 views

Untitled Extract Pages

The document specifies requirements for carbon steel pipes used as sleeves. The sleeve pipes must be made of carbon steel according to API 5L grade B or X-60 standards. The minimum external diameters and wall thicknesses are provided for various nominal diameters of sleeve pipes ranging from 150mm to 1200mm in diameter to enclose fiberglass or cast iron pipes.

Uploaded by

Cyril J Padiyath
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
25 views

Untitled Extract Pages

The document specifies requirements for carbon steel pipes used as sleeves. The sleeve pipes must be made of carbon steel according to API 5L grade B or X-60 standards. The minimum external diameters and wall thicknesses are provided for various nominal diameters of sleeve pipes ranging from 150mm to 1200mm in diameter to enclose fiberglass or cast iron pipes.

Uploaded by

Cyril J Padiyath
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

3.18 SPECIFICATION OF CARBON STEEL PIPE FOR SLEEVE PURPOSE – FOR F.C.

PIPES OR
GRE PIPES

The pipe to be used for sleeve purpose shall be of carbon steel pipe or manufactured from carbon steel plate
with proper welding from certified welder to the specification API 5L grade B or X-60. It shall have following
dimensions:

Nominal Dia. Minimum External Minimum Wall


(FC/GRE Dia. (OD) of Steel Thickness of Steel
Pipe) Sleeve Pipe Sleeve

(mm) (mm) (mm)


1200 1727 12.7
900 1422 10.3
600 1016 9.5
450 813 9.5
300 610 7.1
225 508 6.4
150 457 6.4
100 406 6.4

Dubai Electricity & Water Authority


Tender RFX No : 2132100035 Document : PEW-Vol-II-TS-S3: P & A Rev-1
Technical Specification : Volume-II - Section 3 : PIPES AND APPURTENANCES Page 102/119

You might also like