CHAPTER 4

MARKET
STRUCTURES
INTRODUCTION
Industries are divided into categories according to the
degree of competition that exists between the firms within
the industry. There are four such categories.

At one extreme is perfect competition, where there are very

many firms competing. Each firm is so small relative to the
whole industry that it has no power to influence price. It is a
price taker. At the other extreme is monopoly, where there
is just one firm in the industry, and hence no competition
from within the industry. In the middle come monopolistic
competition, which involves quite a lot of firms competing
and where there is freedom for new firms to enter the
industry, and oligopoly, which involves only a few firms and
where entry of new firms is restricted.

To distinguish more precisely between these four

categories, the following must be considered:

• How freely can firms enter the industry. Is entry free or

restricted? If it is restricted, just how great are the
barriers to the entry of new firms?

CEDAR COLLEGE
• The nature of the product. Do all firms produce an
identical product, or do firms produce their own
particular brand or model or variety?

• The firm’s degree of control over price. Is the firm a

price taker or can it choose its price, and if so, how will
changing its price affect its profits? What we are talking
about here is the nature of the demand curve it faces.
How elastic is it? If the firm puts up its price, will it lose
(a) all its sales (a horizontal demand curve), or (b) a large
proportion of its sales (a relatively elastic demand curve),
or (c) just a small proportion of its sales (a relatively
inelastic demand curve)?

CEDAR COLLEGE
 The table below shows the differences between the four
categories.

Implication for
Number of Freedom of
Type of Market Nature of Product Examples demand curve for
firms Entry
the firm
Perfect Cabbages, Horizontal. The
Very many Unrestricted Homogeneous
Competition carrots firm is a price-taker

Downward sloping
but relatively price
Monopolistic Builders,
Many Unrestricted Differentiated elastic. The firm
Competition Restaurants
has some control
over the price

1. Cement, 2. Downward
1. Undifferentiated
Oligopoly Few Restricted Cars, Electrical sloping, relatively
2. Differentiated
Appliances inelastic

Downward
sloping, more
Restricted or Prescription inelastic than
Monopoly One completely Unique Drugs, Public oligopoly. The
blocked Utility firm has
considerable
control over price

CEDAR COLLEGE
 The market structure under which a firm operates will
The market structure
determine its behavior. Firms under perfect competition will
determines the
behavior of the firm. behave quite differently from firms which are monopolists,
which will behave differently again from firms under
oligopoly or monopolistic competition. This behavior (or
‘conduct’) will in turn affect the firm’s performance: its
prices, profits, efficiency, etc. In many cases, it will also
affect other firms’ performance: their prices, profits,
efficiency, etc. The collective conduct of all the firms in the
industry will affect the whole industry’s performance.

CEDAR COLLEGE
PERFECT COMPETITION
Perfect Competition in the Short-run

Perfect competition is a model of the market based on the

assumption that a large number of firms produce identical
goods consumed by a large number of buyers. The model
of perfect competition also assumes that it is easy for new
firms to enter the market and for existing ones to leave.
And finally, it assumes that buyers and sellers have
complete information about market conditions.

In perfect competition, firms are not in direct competition

with each other. One firm can expand output without
affecting either the price or the sales of the other firm. Each
firm is a price-taker, facing a perfectly elastic demand
curve. However, competition is ‘perfect’, because any firm
which charges a higher price than its competitors, or sells
an inferior good will lose all its sales, as perfectly informed
customers buy elsewhere in the market.

Assumptions of perfect competition

The model of perfect competition is built on four

assumptions:

• Firms are price takers: There are so many firms in the

industry that each one produces an insignificantly small
portion of total industry supply, and therefore has no
power whatsoever to affect the price of the product. It
faces a horizontal demand ‘curve’ at the market price:

CEDAR COLLEGE
 the price determined by the interaction of demand and
supply in the whole market.

• There is complete freedom of entry and exit into the

industry for new firms: Existing firms are unable to stop
new firms setting up in business. Setting up a business
takes time, however. Freedom of entry, therefore,
applies in the long run.

• All firms produce an identical product: The product is

‘homogeneous’. There is therefore no branding or
advertising.

• Producers and consumers have perfect knowledge of

the market: That is, producers are fully aware of prices,
costs and market opportunities. Consumers are fully
aware of the price, quality and availability of the
product.

These assumptions are very strict. Few, if any, industries in

the real world meet these conditions. Certain agricultural
markets are perhaps closest to perfect competition. The
market for fresh vegetables is an example. Nevertheless,
despite the lack of real-world cases, the model of perfect
competition plays a very important role in economic
analysis and policy. Its major relevance is as an ‘ideal type’.
Many argue that perfect competition would bring a number
of important advantages. The model can thus be used as a
standard against which to judge the shortcomings of real-

CEDAR COLLEGE
 world industries. It can help governments to formulate
policies towards industry.

In the short run, the number of firms is fixed. Depending on

its costs and revenue, a firm might be making large profits,
small profits, no profits or a loss; and in the short run, it may
continue to do so.

The short-run equilibrium of the firm

The determination of price, output and profit in the short

run under perfect competition can best be shown in Figure
4.1

FIGURE 4.1 Short run equilibrium of industry and firm under perfect competition

CEDAR COLLEGE
 Figure 4.1 shows a short-run equilibrium for both industry
and a firm under perfect competition. Let us examine the
determination of price, output and profit in turn.

The price is determined in the industry by the intersection

of demand and supply. The firm faces a horizontal demand
(or average revenue) ‘curve’ at this price. It can sell all it can
In perfect
competition the firm produce at the market price (P0), but nothing at a price
face a horizontal above P0.
demand curve. The
firm will equate MR = Output
MC to maximize
profits and produce The firm will maximize profit where marginal cost equals
output q0
marginal revenue (MR = MC), at an output of q0. Note that,
since the price is not affected by the firm’s output, marginal
revenue will equal price.

Profit

If the average cost (AC) curve (which includes normal profit)

dips below the price or average revenue ‘curve’, the firm
will earn supernormal profit. Supernormal profit per unit at
Q0 is the vertical difference between P and AC at q0. Total
supernormal profit is the shaded rectangle in Figure 4.1.

CEDAR COLLEGE
 Profit and losses in the Short-run

In the short run, although the firm produces the profit-

maximizing output, it does not necessarily end up making
an economic profit. It might do so, but it might alternatively
break even (earn a normal profit) or incur an economic loss.
Economic profit (or loss) is price, P, minus average total
cost, ATC. So economic profit is (P − ATC) × Q. If price
equals average total cost, a firm breaks even – makes
normal profit. If price exceeds average total cost, a firm
makes an economic profit. If price is less than average total
cost, the firm incurs an economic loss. Figure 4.2 shows
how a fall in demand results in a firm to make normal profit
in the short-run.

FIGURE 4.2 Falling demand resulting in normal profits in the short-run

CEDAR COLLEGE
 A fall in market demand from D to D’ results in the market
price to fall from P1 to P2 and also cause a firm’s demand
curve and price to fall and also causes it to make normal
profit at point B, where MC = MR. This is because at point
B, the price is equal to average cost, where the firm makes
normal profit.

Similarly, if the demand falls below D’ to D”, the market

price will fall below P2, and the firm’s price (P3) will fall lower
than AC, resulting in it to make an economic loss in the
short run equal to the shaded region. This is shown in
Figure 4.3 below.

FIGURE 4.3 Economic Loss in the short run

CEDAR COLLEGE
 Economic Losses in the short-run

In the short run, a firm has one or more inputs whose

quantities are fixed. That means that in the short run the
firm cannot leave its industry. Even if it cannot cover all of
its costs, including both its variable and fixed costs, going
entirely out of business is not an option in the short run.
The firm may close its doors, but it must continue to pay its
fixed costs. It is forced to accept an economic loss, the
amount by which its total cost exceeds its total revenue.

Suppose, for example, that a manufacturer has signed a 1-

year lease on some equipment. It must make payments for
this equipment during the term of its lease, whether it
produces anything or not. During the period of the lease,
the payments represent a fixed cost for the firm.

A firm that is experiencing economic losses—whose

economic profits have become negative—in the short run
To determine
whether to shut may either continue to produce or shut down its
down or to operate operations, reducing its output to zero. It will choose the
the relationship
option that minimises its losses. The crucial test of whether
between price and
average variable cost to operate or shut down lies in the relationship between
is analysed. price and average variable cost.

Suppose the demand for a good falls to D”, as shown in

Figure 4.3. The market price plunges to P3, which is below
average total cost. Consequently the firm experiences
negative economic profit or a loss. Although the new
market price falls short of average total cost, it still exceeds

CEDAR COLLEGE
 average variable cost, AVC. Therefore, the firm should
continue to produce an output at which marginal cost
equals marginal revenue. Why? Let’s see this through an
example.

FIGURE 4.4 Economic Loss in the short-run

In this example, the firm at equilibrium is making a loss

equal to the shaded region or (P - ATC) x Q equal to $2000.
The gap between ATC and AVC is the AFC, which at Q =
1000 is $5. This means that the fixed cost is $5000, which is
AFC x Q or the shaded area.

CEDAR COLLEGE
In the short run, a firm cannot avoid its fixed costs. But it
can avoid variable costs by temporarily laying off workers
and shutting down. In this case if the firm shuts down and
produces no output, it incurs an economic loss equal to its
total fixed cost, which in this case is $5000. This loss is the
largest that a firm need incur. However, in this case if it
produces then it will minimize its loss by making a loss of
$2000. Hence, when price is greater than AVC, the firm
continues to produce as it is able to cover part of its fixed
cost ($2000 of the $5000) and the whole of its variable cost
($5000).

A firm shuts down if price falls below the minimum average

variable cost. A firm’s shutdown point is the output and
price at which the firm just covers its total variable costs,
point T in Figure 4.5. If the price is P4, the profit-maximizing
output is Q4 at point U (MC = MR), where price is also
equal to average variable cost, so the firm’s total revenue
equals its total variable cost. Here, the firm incurs an
economic loss equal to total fixed cost. If the price falls
below P4, no matter what quantity the firm produces,
average variable cost exceeds price and its loss exceeds
total fixed cost. So the firm shuts down temporarily.

CEDAR COLLEGE
FIGURE 4.5 Shutdown down point

The Short-run Supply Curve

If the price is above minimum average variable cost, a firm

maximises profit by producing the output at which marginal
cost equals price. We can determine the quantity produced
from the marginal cost curve. At a price of P1, the marginal
revenue curve is MR1 and the firm maximises profit by
producing Q1. At a price of P2, the marginal revenue curve
is MR2 and the firm produces Q2. The firm’s supply curve,
shown above shows that at prices above minimum average
variable cost, the supply curve is the same as the marginal
cost curve above the shutdown point (U). At prices below
minimum average variable cost, the firm shuts down and

CEDAR COLLEGE
produces nothing. At a price of P4, the firm is indifferent
between shutting down and producing Q4. Either way, it
incurs a loss equal to its fixed cost.

The horizontal summation of the individual firm’s supply

curves of all the firms in the industry results in the industry
supply curve.

Perfect Competition in the Long run

Economic profits and losses play a crucial role in the model

of perfect competition. The existence of economic profits in
a particular industry attracts new firms to the industry in the
long run. As new firms enter, the supply curve shifts to the
right, price falls, and profits fall. Firms continue to enter the
industry until economic profits fall to zero. If firms in an
industry are experiencing economic losses, some will leave.
The supply curve shifts to the left, increasing price and
reducing losses. Firms continue to leave until the remaining
firms are no longer suffering losses—until economic profits
are zero.

Economic profit equals total revenue minus total cost,

where cost is measured in the economic sense as
opportunity cost. An economic loss (negative economic
profit) is incurred if total cost exceeds total revenue.

The Long Run and Zero Economic Profits

Given our definition of economic profits, we can easily see

why, in perfect competition, they must always equal zero in

CEDAR COLLEGE
the long run. Suppose there are two industries in the
economy, and that firms in Industry A are earning economic
profits. By definition, firms in Industry A are earning a return
greater than the return available in Industry B. That means
that firms in Industry B are earning less than they could in
Industry A. Firms in Industry B are experiencing economic
losses.

Given easy entry and exit, some firms in Industry B will

leave it and enter Industry A to earn the greater profits
available there. As they do so, the supply curve in Industry
B will shift to the left, increasing prices and profits there. As
former Industry B firms enter Industry A, the supply curve in
Industry A will shift to the right, lowering profits in A. The
process of firms leaving Industry B and entering A will
continue until firms in both industries are earning zero
economic profit. That suggests an important long-run
result: Economic profits in a system of perfectly competitive
markets will, in the long run, be driven to zero in all
industries.

Eliminating Economic Profit: The Role of Entry

The process through which entry will eliminate economic

profits in the long run is illustrated in Figure 4.6. The
example shows the market for radishes, where the market is
perfectly competitive. The price of radishes is $0.40 per
pound. The farmer’s average total cost at an output of
6,700 pounds of radishes per month is $0.26 per pound.

CEDAR COLLEGE
 Profit per unit is $0.14 ($0.40 − $0.26). The farmer thus
earns a profit of $938 per month (=$0.14 × 6,700).

FIGURE 4.6 Eliminating Economic Profits in the long-run

If firms in an industry are making an economic profit, entry

will occur in the long run. In Panel (b), a single firm’s profit is
shown by the shaded area. Entry continues until firms in the
industry are operating at the lowest point on their
respective average total cost curves, and economic profits
fall to zero.

Profits in the radish industry attract entry in the long run.

Panel (a) of Figure 4.6 shows that as firms enter, the supply
curve shifts to the right and the price of radishes falls. New

CEDAR COLLEGE
firms enter as long as there are economic profits to be
made—as long as price exceeds ATC in Panel (b). As price
falls, marginal revenue falls to MR’ and the firm reduces the
quantity it supplies, moving along the marginal cost (MC)
curve to the lowest point on the ATC curve. Although the
output of individual firms falls in response to falling prices,
there are now more firms, so industry output rises to Q1
million pounds per month in Panel (a).

Eliminating Losses: The Role of Exit

Just as entry eliminates economic profits in the long run,

exit eliminates economic losses. In Figure 4.7, Panel (a)
shows the case of an industry in which the market price P1
is below ATC. In Panel (b), at price P1 a single firm produces
a quantity q1, assuming it is at least covering its average
variable cost. The firm’s losses are shown by the shaded
rectangle bounded by its average total cost and price P1
and by output q1.

Because firms in the industry are losing money, some will

exit. The supply curve in Panel (a) shifts to the left, and it
continues shifting as long as firms are suffering losses.
Eventually the supply curve shifts all the way to S2, price
rises to P2, and economic profits return to zero.

CEDAR COLLEGE
FIGURE 4.7 Eliminating Economic Losses in the long-run

Panel (b) shows that at the initial price P1, firms in the
industry cannot cover average total cost (MR1 is below
ATC). That induces some firms to leave the industry, shifting
the supply curve in Panel (a) to S2, reducing industry output
to Q2 and raising price to P2. At that price (MR2), firms earn
zero economic profit, and exit from the industry ceases.
Panel (b) shows that the firm increases output from q1 to q2;
total output in the market falls in Panel (a) because there
are fewer firms.

CEDAR COLLEGE
The Long-run industry supply curve

If industry demand increased, what would happen to

industry price and output in the long run? The long-run
supply curve gives the answer. Each of the diagrams in
Figure 4.8 shows an increase in demand. The demand
curve shifts from D1 to D2. Equilibrium in the short run
moves from point a to point b, where D2 and S1 intersect.
After the initial rise in price, the resulting supernormal profit
attracts new firms into the industry. The short-run supply
curve shifts to S2 and equilibrium moves to point c. Thus
the long-run effect of the increase in demand has been to
move the equilibrium from point a to point c. This means,
therefore, that the long-run supply curve will pass through
points a and c. This is illustrated in each of the three
diagrams.

If price falls back to its original level (i.e. points a and c are
at the same price) the long-run supply curve will be
horizontal, Figure 4.8 (a). This would occur if there were no
change in firms’ average cost curves. Price would simply
return to the bottom of firms’ LRAC curve. If, however, the
entry of new firms creates a shortage of factors of
production, this will bid up factor prices. Firms’ LRAC curve
will shift vertically upwards, and so the long run equilibrium
price will be higher. The long-run supply curve of the
industry, therefore, will slope upwards, as in Figure 4.8(b).
This is the case of increasing industry costs or external
diseconomies of scale.

CEDAR COLLEGE
 If the expansion of the industry lowers firms’ LRAC curve,
due, say, to the building-up of an industrial infrastructure
(distribution channels, specialist suppliers, banks,
communications, etc.), the long-run supply curve will slope
downwards, as in Figure 4.8(c). This is the case of
decreasing industry costs or external economies of scale.

FIGURE 4.8 Various long-run industry supply curves under perfect competition

CEDAR COLLEGE
ECONOMIC EFFICIENCY
Resources are said to be allocated efficiently if:

1. It is not possible to produce more of one good without

producing less of another

2. By reallocation, it is not possible to make one person

better off without making someone less worse off

Efficient resources allocation is also called Pareto optimal

allocation.

Economic Efficiency = Productive Efficiency + Allocative

Efficiency

Productive Efficiency

An economy is said to be productively efficient when it

produces the maximum attainable output from the given
scarce amount of resources.

Macro approach: For productive efficiency to occur, the

economy must be operating on its PPC, where all the
resources are fully employed. This is because at every point
on the PPC, it is not possible to produce more of one good
without producing less of another. Point E is productively
inefficient because more of both goods can be produced
without less of another, if resources are employed
efficiently.

CEDAR COLLEGE
 FIGURE 4.9 Productive Efficiency – Macro Approach

Micro approach:

A situation where firms are producing the maximum output

for a given amount of inputs, or producing a given output
The marginal product
of capital over the at the least cost. The least-cost combination of factors for a
price of capital given output. Hence, for productive efficiency to occur,
should be equal to
each firm should produce on its LRAC, as all points on the
the marginal product
of labour over the LRAC are where the condition below is met:
price of labour to
achieve productive MPK/PK = MPL/PL
efficiency. All points
on the LRAC meet Hence for individual firms, productive efficiency implies that
this condition. for given technology, output is produced using the least
amount of resources possible.

CEDAR COLLEGE
 FIGURE 4.10 Productive Efficiency – Micro Approach

For the industry, the least condition for productive

The lowest point on
efficiency under the micro approach is that marginal cost of
the LRAC is
productively efficient, producing the last unit must be equal for each firm in the
represented by point industry. This is because if they are unequal, reallocation
A on Figure 4.10
between firms can reduce costs.

MC firm A= MC firm B = MC firm C= … MC firm N

Allocative Efficiency

Allocative efficiency is about whether an economy allocates

its resources in such a way as to produce a balance of
goods and services that matches consumer preferences. All
points on the PPC are productively efficient but only one
point is allocatively efficient.

CEDAR COLLEGE
 From the firms’ point of view, the price is equal to marginal
cost, and from the consumers’ point of view, the price is
equal to marginal benefit or the marginal utility. Suppose
that the marginal benefit from consuming a good were
higher than the marginal cost to society of producing it. It
could then be argued that society would be better off
producing more of the good because, by increasing
production, more could be added to benefits than to costs.
Equally, if the marginal cost were above the marginal
benefit from consuming a good, society would be
producing too much of the good and would benefit from
producing less. The best possible position is thus where
marginal benefit is equal to marginal cost – in other words,
where price is set equal to marginal cost.

FIGURE 4.11 MU = MC

CEDAR COLLEGE
When P = MC, both consumer and producer surplus is
maximized and there is no under or overallocation of
resources. If all markets in an economy operated in this
way, resources would be used so effectively that no
reallocation of resources could generate an overall
improvement. Allocative efficiency would be attained.

In Figure 4.11, both consumer surplus and producer surplus

are maximised at output Qe. This is the equilibrium output
under perfect competition. Thus, under perfect
competition, the market will ensure that total surplus (areas
A + B), sometimes called total private surplus, is
maximized. At this output, P = MC.

At any output other than Qe total surplus will be less. If

output were below Qe, then MU would be above MC: total
surplus would be increased by producing more. If output
were above Qe, then MU would be below MC: total surplus
would be increased by producing less.

Dynamic efficiency

The discussion of efficiency so far has been conducted in

terms of how to make the best use of existing resources,
producing an appropriate mix of goods and services and
using factor inputs as efficiently as possible given existing
knowledge and technology. This is a static view of
efficiency.

Dynamic efficiency goes one step further, recognising that

the state of knowledge and technology changes over time.

CEDAR COLLEGE
For example, investment in research and development
today means that production can be carried out more
efficiently at some future date. Furthermore, the
development of new products may also mean that a
different mix of goods and services may serve consumers
better in the long term.

The notion of dynamic efficiency stemmed from the work of

Joseph Schumpeter, who argued that a preoccupation with
static efficiency (efficiency in the short run) may sacrifice
opportunities for greater efficiency in the long run. In other
words, there may be a trade-off between achieving
efficiency today and improving efficiency tomorrow.

CEDAR COLLEGE
Perfect Competition and the Public Interest

Benefits of Perfect Competition

1. Allocative Efficiency: For an individual market, allocative

efficiency is achieved when price is set equal to marginal
cost. Again, the process by which supernormal profits are
competed away, through the entry of new firms into the
market, ensures that price is equal to marginal cost within
a perfectly competitive market in long-run equilibrium.
So allocative efficiency is also achieved. Indeed, firms set
price equal to marginal cost even in the short run, so
allocative efficiency is a feature of perfect competition in
both the short run and the long run.

2. Productive Efficiency: For an individual market,

productive efficiency is reached when a firm operates at
the minimum point of its long-run average cost curve.
Under perfect competition, this is indeed a feature of the
long-run equilibrium position. So, productive efficiency is
achieved in the long run – but not in the short run, when
a firm need not be operating at minimum average cost.

3. Survival of the fittest: Perfect competition is a case of

‘survival of the fittest’. Inefficient firms will be driven out
of business, since they will not be able to make even
normal profits. This encourages firms to be as efficient as
possible and, where possible, to invest in new improved
technology.

CEDAR COLLEGE
4. Normal Profits: The combination of (long-run)
production being at minimum average cost and the firm
making only normal profit keeps prices at a minimum.

5. Quick to respond to consumer needs: If consumer

tastes change, the resulting price change will lead firms
to respond (purely out of self-interest). An increased
consumer demand will call forth extra supply with only a
short-run increase in profit.

Because of these last two points, perfect competition is

said to lead to consumer sovereignty. Consumers, through
the market, determine what and how much is to be
produced. Firms have no power to manipulate the market.
They cannot control price. The only thing they can do to
increase profit is to become more efficient, and that
benefits the consumer too.

Disadvantages of Perfect Competition

1. No incentive to invest: Perfect competition may be less

desirable than other market structures such as monopoly.
Even though firms under perfect competition may seem
to have an incentive to develop new technology (in order
to gain supernormal profits, albeit temporarily), they may
not be able to afford the necessary research and
development. Also, they may be afraid that if they did
develop new more efficient methods of production, their
rivals would merely copy them, in which case the
investment would have been a waste of money.

CEDAR COLLEGE
2. Lack of Variety: Perfectly competitive industries produce
undifferentiated products. This lack of variety might be
seen as a disadvantage to the consumer. Under
monopolistic competition and oligopoly there is often
intense competition over the quality and design of the
product. This can lead to pressure on firms to improve
their products. This pressure will not exist under perfect
competition.

CEDAR COLLEGE
MONOPOLY
Monopoly is at the opposite end of the spectrum of market
models from perfect competition. A monopoly firm has no
rivals. It is the only firm in its industry. There are no close
substitutes for the good or service a monopoly produces.
Not only does a monopoly firm have the market to itself,
but it also need not worry about other firms entering. In the
case of monopoly, entry by potential rivals is prohibitively
difficult.

A monopoly does not take the market price as given; it

determines its own price. It selects from its demand curve
the price that corresponds to the quantity the firm has
chosen to produce in order to earn the maximum profit
possible. The entry of new firms, which eliminates profit in
the long run in a competitive market, cannot occur in the
monopoly model.

A firm that sets or picks price based on its output decision

is called a price setter. A firm that acts as a price setter
possesses monopoly power.

As was the case when we discussed perfect competition

previously, the assumptions of the monopoly model are
rather strong. In assuming there is one firm in a market, we
assume there are no other firms producing goods or
services that could be considered part of the same market
as that of the monopoly firm. In assuming blocked entry, we
assume, for reasons we will discuss below, that no other

CEDAR COLLEGE
firm can enter that market. Such conditions are rare in the
real world. As always with models, we make the
assumptions that define monopoly in order to simplify our
analysis, not to describe the real world. The result is a
model that gives us important insights into the nature of
the choices of firms and their impact on the economy.

Barriers to entry

For a firm to maintain its monopoly position there must be

barriers to entry of new firms. Barriers can be of various
forms.

Economies of scale: If a monopoly experiences substantial

economies of scale, the industry may not be able to
support more than one producer.

A firm that confronts economies of scale over the entire

range of outputs demanded in its industry is a natural
monopoly. Utilities that distribute electricity, water, and
natural gas to some markets are examples. In a natural
monopoly, the LRAC of any one firm intersects the market
demand curve where long-run average costs are falling or
are at a minimum. If this is the case, one firm in the industry
will expand to exploit the economies of scale available to it.
Because this firm will have lower unit costs than its rivals, it
can drive them out of the market and gain monopoly
control over the industry.

Suppose there are 12 firms, each operating at the scale

shown by ATC1 (average total cost) in Figure 4.12. A firm

CEDAR COLLEGE
 that expanded its scale of operation to achieve an average
total cost curve such as ATC2 could produce 240 units of
output at a lower cost than could the smaller firms
producing 20 units each. By cutting its price below the
minimum average total cost of the smaller plants, the larger
firm could drive the smaller ones out of business. In this
situation, the industry demand is not large enough to
support more than one firm. If another firm attempted to
enter the industry, the natural monopolist would always be
able to undersell it.

FIGURE 4.12 Economies of Scale Lead to Natural Monopoly

CEDAR COLLEGE
A firm with falling LRAC throughout the range of outputs
relevant to existing demand (D) will monopolize the
industry. Here, one firm operating with a large plant (ATC2)
produces 240 units of output at a lower cost than the $7
cost per unit of the 12 firms operating at a smaller scale
(ATC1), and producing 20 units of output each.

Even if a market could support more than one firm, a new

entrant is unlikely to be able to start up on a very large
scale. Thus a monopolist already experiencing economies
of scale can charge a price below the cost of the new
entrant and drive it out of business. If, however, the new
entrant is a firm already established in another industry, it
may be able to survive this competition.

Network economies: When a product or service is used by

everyone in the market, there are benefits to all users from
having access to other users. Thus Microsoft’s Windows, by
providing such large network economies makes it very
difficult for other operating systems to compete. Similar
network economies apply to Adobe’s Acrobat (for pdf files)
and airlines operating interconnecting routes.

Economies of scope: A firm that produces a range of

products is also likely to experience a lower average cost of
production. For example, a large pharmaceutical company
producing a range of drugs and toiletries can use shared
research, marketing, storage and transport facilities across
its range of products. These lower costs make it difficult for
a new single-product entrant to the market, since the large

CEDAR COLLEGE
firm will be able to undercut its price and drive it out of the
market.

Product differentiation and brand loyalty: If a firm

produces a clearly differentiated product, where the
consumer associates the product with the brand, it will be
very difficult for a new firm to break into that market. Rank
Xerox invented, and patented, the plain paper photocopier.
After this legal monopoly (see below) ran out, people still
associated photocopiers with Rank Xerox. It is still not
unusual to hear someone say that they are going to ‘Xerox
the article’. In most cases, such loyalty would not be
enough to block entry, but it might well reinforce other
barriers.

Lower costs for an established firm: An established

monopoly is likely to have developed specialised
production and marketing skills. It is more likely to be
aware of the most efficient techniques and the most
reliable and/or cheapest suppliers. It is likely to have access
to cheaper finance. It is thus operating on a lower cost
curve. New firms would therefore find it hard to compete
and would be likely to lose any price war.

Ownership of, or control over, key inputs: If a firm

governs the supply of vital inputs (say, by owning the sole
supplier of some component part), it can deny access to
these inputs to potential rivals. On a world scale, the de
Beers company has a monopoly in fine diamonds because

CEDAR COLLEGE
all diamond producers market their diamonds through de
Beers.

Ownership of, or control over, wholesale or retail

outlets: Similarly, if a firm controls the outlets through
which the product must be sold, it can prevent potential
rivals from gaining access to consumers. For example,
Unilever supplies freezers free to shops on the condition
that they stocked only Wall’s ice cream in them.

Legal protection: The firm’s monopoly position may be

protected by patents on essential processes, by copyright,
by various forms of licensing (allowing, say, only one firm to
operate in a particular area) and by tariffs (i.e. customs
duties) and other trade restrictions to keep out foreign
competitors. Examples of monopolies protected by patents
include most new medicines developed by pharmaceutical
companies (e.g. anti-AIDS drugs).

Mergers and takeovers: The monopolist can put in a

takeover bid for any new entrant. The sheer threat of
takeovers may discourage new entrants.

Aggressive tactics: An established monopolist can

probably sustain losses for longer than a new entrant. Thus
it can start a price war, mount massive advertising
campaigns, offer an attractive after-sales service, introduce
new brands to compete with new entrants, and so on.

CEDAR COLLEGE
Intimidation: The monopolist may resort to various forms
of harassment, legal or illegal, to drive a new entrant out of
business.

Equilibrium Price and Output

Since there is, by definition, only one firm in the industry,

the firm’s demand curve is also the industry demand curve.
Compared with other market structures, demand under
monopoly will be relatively inelastic at each price. The
monopolist can raise its price and consumers have no
alternative firm in the industry to turn to. They either pay
the higher price or go without the good altogether.

Unlike the firm under perfect competition, the monopoly

firm is a ‘price maker’. It can choose what price to charge.
Nevertheless, it is still constrained by its demand curve. A
rise in price will lower the quantity demanded.

As with firms in other market structures, a monopolist will

maximize profit where MR = MC. In Figure 4.13, profit is
maximized at Q*. The supernormal profit obtained is shown
by the shaded area.

These profits will tend to be larger the less elastic is the

demand curve (and hence the steeper is the MR curve), and
thus the bigger is the gap between MR and price (AR). The
actual elasticity will depend on whether reasonably close
substitutes are available in other industries. The demand for
a rail service will be much less elastic (and the potential for

CEDAR COLLEGE
 profit greater) if there is no bus service to the same
destination.

Since there are barriers to the entry of new firms, these

supernormal profits will not be competed away in the long
run. The only difference, therefore, between short-run and
long-run equilibrium is that in the long run the firm will
produce where MR = long-run MC.

FIGURE 4.13 Monopoly Profit

CEDAR COLLEGE
Monopoly and the Public Interest

Disadvantages of monopoly

There are several reasons why monopolies may be against

the public interest and, as a result, these have given rise to
legislation to regulate monopoly power and/or behavior.

1. Allocative Inefficiency: Unlike perfect competition, the

monopolist produces at the level of output where there is
allocative inefficiency. This is shown in Figure 4.14.

The monopolist is producing at the profit-maximizing level

of output, q. Output is being restricted in order to force up
the price and to maximize profit. The allocative efficient
level of output where P = MC is q2, is not being achieved.

If the same industry operated under perfect competition,

however, it would produce at q2 leading to a higher output
and a lower price. This is where industry supply under
perfect competition equals industry demand. We know that
the firm’s supply curve under perfect competition is its MC
curve and thus the industry’s supply curve is simply the
industry MC curve: the MC curve shown in Figure 4.14. This
analysis is based on the assumption that the industry has
the same AC and MC curves whether under perfect
competition or run as a monopoly.

CEDAR COLLEGE
FIGURE 4.14 Equilibrium of the industry under perfect competition and
monopoly: with the same MC curve

When we were looking at the advantages of perfect

competition, we said that where P = MC could be argued
to be the optimum level of production. This is because
under perfect competition when P = MC, both consumer
and producer surplus are maximum and the industry is
allocatively efficient.

However, a monopoly is not allocatively efficient and results

in a dead weight loss.

CEDAR COLLEGE
FIGURE 4.15 Dead weight loss due to Monopoly

With perfect competition, the consumer surplus is Area 1 +

Area 2 and Area 3 (area below the demand curve and
above the competitive price), while the producer surplus is
Area 4 and Area 5 (area below the price and above the
supply curve).

However, the monopoly results in a higher price and lower

output causing a social welfare loss. With monopoly,
consumer surplus is Area 1, while producer surplus is Area
2 and Area 5. Because Q2 – Q1 output is not produced,
there is a dead weight loss equal to Area 3 + Area 4.

CEDAR COLLEGE
2. Productive Inefficiency: A firm is said to be productively
efficient if it produces at the minimum point of long-run
average cost. It is clear from the figure 11 that this is
extremely unlikely for a monopoly. The firm will produce
at the minimum point of long-run average cost only if it
so happens that the marginal revenue curve passes
through this exact point – and this would happen only by
coincidence. Under perfect competition, freedom of
entry eliminates supernormal profit and forces firms to
produce at the bottom of their LRAC curve. The effect,
therefore, is to keep long-run prices down. Under
monopoly, however, barriers to entry allow profits to
remain supernormal in the long run. The monopolist is
not forced to operate at the bottom of the AC curve.

3. Possibility of higher cost curves due to lack of

competition: The sheer survival of a firm in the long run
under perfect competition requires that it uses the most
efficient known technique, and develops new techniques
wherever possible. The monopolist, however, sheltered
by barriers to entry, can still make large profits even if it
is not using the most efficient technique. It has less
incentive, therefore, to be efficient. This type of
inefficiency is called X-inefficiency. On the other hand, if
it can lower its costs by using and developing more
efficient techniques, it can gain extra supernormal profits
which will not be competed away.

CEDAR COLLEGE
 Advantages of Monopoly

Despite these arguments, monopolies can have some

advantages.

1. Economies of scale: The monopoly may be able to

achieve substantial economies of scale due to larger
plant, centralized administration and the avoidance of
unnecessary duplication. If this results in MC curve
substantially below that of the same industry under
perfect competition, the monopoly will produce a higher
output at a lower price. In the diagram, the monopoly
produces at price P2 and quantity Q2, where MC = MR,
whereas perfectly competitive industry produces at
higher price P1 and lower quantity Q1 due to higher cost.

FIGURE 4.16 Monopoly and Economies of Scale

CEDAR COLLEGE
2. Possibility of Lower cost curves due to more research
and development and more investment: Although the
monopolist’s sheer survival does not depend on its
finding ever more efficient methods of production, it can
use part of its supernormal profits for research and
development and investment. Thus it has a greater ability
to become efficient than a small firm with limited funds.

3. Innovation and New Products: The promise of

supernormal profits protected perhaps by patents, may
encourage the development of new technology and new
products. The theory of creative destruction by
economist Joseph Schumpeter argues that monopolist
undertakes long-term R&D to enforce barriers to entry by
producing new and improved services. Simultaneously,
firms outside the industry may also use R&D to try to
break barriers to entry. The process of creative
destruction works in favor of consumers by producing
innovation and new products. Hence, monopolies can be
dynamically efficient.

Control of Monopoly

Monopoly results in higher prices and lower output, which

can be both productively and allocatively inefficient.
Control may take several forms:

1. Laws and Regulations: Government laws and regulations

ensure anticompetitive practices are curtailed and
exploiting monopolies are kept under control.

CEDAR COLLEGE
 2. Price controls: The government could set a price lower
than profit maximizing price. This has the effect of
changing the AR and MR curves of the monopolist. With
a fixed price PG , the demand curve above X becomes
perfectly elastic. This also makes the MR up till the point
X to be elastic. The best price for monopoly to set is
where the new MR is equal to the MC, which will happen
when PG, the new demand and MR curve is equal to MC
at point Y. Hence, the control price results in lower price
and higher output.

FIGURE 4.17 Price Control on Monopoly

CEDAR COLLEGE
 3. Marginal Cost pricing: Under this method, the
monopolist is forced by the government to sell at P =
MC. If the regulated price is above average cost of
production, the business makes satisfying levels of
profits.

FIGURE 4.18 Marginal Cost Pricing

PG = MC and it is the
price at which the
monopoly sells
output QG.

CEDAR COLLEGE
 4. Natural Monopoly: In case of falling AC, where MC is
below AC, marginal cost pricing may result in the natural
monopoly to incur losses. The monopoly may eventually
shut down. In this case, the government may allow
average cost pricing to control monopoly.

FIGURE 4.19 Natural Monopoly

At A: P = AC but P >
LRMC; therefore the
firm makes a profit.

At B: P < LRAC, but P

= MC; therefore
monopolist makes an
economic loss

CEDAR COLLEGE
 Monopoly and Price Discrimination

Price discrimination is where a firm sells the same product

to different consumers at different prices even though
production costs are the same. There are three forms of
price discrimination:

1. First Degree Price discrimination is where the firm

charges each consumer the maximum price he or she is
prepared to pay for each unit. This is the most profitable
solution for a monopolist, because it is able to convert
the entire consumer surplus into producer surplus. This is
how it is assumed that traders in a bazaar or market
operate when they bargain to try to get the highest price
that they can. In Figure 4.20, we see the case of a trader

FIGURE 4.20 First Degree price discrimination

CEDAR COLLEGE
 selling World Cup t-shirts to tourists in a market. The
trader attempts to bargain with the tourists to sell each
shirt at the highest price that the tourist is prepared to
pay. If the trader is successful then, as we can see, on
that day the trader will sell one shirt at $14, one at $13,
one at $12, and so on. If the trader did not price
discriminate, then total revenue for the day would be the
shaded pale blue rectangle. However, by discriminating,
the trader has eliminated the consumer surplus of the
tourists and so the trader’s total revenue is the shaded
pale blue area plus the shaded dark blue triangle. Also,
since the extra revenue received from each shirt (the
marginal revenue) is equal to the price of the shirt, in this
case, D = MR.

2. Second Degree Price Discrimination is where the firm

charges different prices according to how much they
purchase. This is often how utilities companies (e.g.
electricity and gas providers) operate. They may charge a
low price for the first number of units, the essential ones,
and then a higher price for any extra units consumed.
Figure 4.21 shows the situation for the pricing of text
messages by a mobile phone company. The first 50
messages per month are charged at a rate of 30¢ each.
Any messages sent over this number are charged at the
reduced rate of 20¢ per message.

CEDAR COLLEGE
FIGURE 4.21 Second Degree price discrimination

3. Third Degree Price Discrimination is where consumers are

grouped into two or more independent markets and a
separate price is charged in each market. Examples
include different bus fares for adults and children.

CEDAR COLLEGE
FIGURE 4.22 Third Degree price discrimination

The management of the cinema has identified two distinct

market segments in their audience, adults and students.
The students have a more elastic demand for going to films
because they have lower incomes. Thus the management
know that they will have to charge a lower price for
students than for adults. They can separate the market
segments, because the students need to show some proof
of their status before they are allowed into the cinema with
a lower price ticket. When the marginal cost is transferred
to each market segment, we can find the profit-maximizing
position in each. In the student segment, when
MC=MR=$5, profits are maximized by charging a price of
$7.50 and attracting 375 students. In the adult segment,

CEDAR COLLEGE
when MC=MR=$5, profits are maximized by charging a
price of $10.25 and attracting 325 adults.

In third-degree price discrimination, a market may be

broken up into more than two segments, but the principle
will be the same. In cinemas, there are many different
prices offered, such as normal adult, student, senior citizen,
and under 12, but they all take account of different
elasticities and they are all examples of third-degree price
discrimination.

Conditions necessary for price discrimination

In order for a producer to be able to price discriminate,

three conditions are necessary.

1. The producer must have some price-setting ability, i.e.

the market must be imperfect. The more price-setting
ability the producer has, the easier it is for price
discrimination to take place, which is why it is most often
found in monopoly and oligopoly markets. Price
discrimination is not possible in perfect competition.

2. The consumers must have different price elasticities of

demand for the product. If they do not, then they would
not be prepared to pay different prices for the product. It
follows that a consumer with relatively inelastic demand
for a product will be prepared to pay a higher price than
a consumer with relatively elastic demand, since elasticity
tends to signify the importance of a product to
consumers.

CEDAR COLLEGE
3. The producer must be able to separate the consumers,
so that they are not able to buy the product and then sell
it to another consumer. If this were not the case, then the
consumers who buy the product at a low price would
simply sell to those who were paying the higher price, at
a price below that one. This would destroy the ability of
the producer to practice price discrimination.

Advantages to the firm

There are clear advantages to the firm:

1. Price discrimination enables the producer to gain a

higher level of revenue from a given amount of sales.
This occurs because consumer surplus is eroded.

2. Price discrimination may enable the producer to produce

more of the product and thus gain from economies of
scale. This could benefit everyone, by lowering average
costs and lowering prices in all of the market segments.

3. Price discrimination may enable a firm to drive

competitors out of the more elastic market. If the firm is
able to price discriminate, then it may use profits gained
in the inelastic market segment to lower prices in the
more elastic segment and thus undercut its competitors
in that segment. This especially occurs in international
trade, where a firm may have inelastic demand in the
home market and more elastic demand in foreign
markets.

CEDAR COLLEGE
Price Discrimination and the public interest

No clear-cut decision can be made over the social

desirability of price discrimination. Some people benefit
from it; others lose. This can be illustrated by considering
the effects of price discrimination on the following aspects
of the market.

1. Distribution: Those paying the higher price will probably

feel the price discrimination is unfair to them. On the
other hand, those charged the lower price may thereby
be able to obtain a good or service they could not
otherwise afford. Price discrimination is likely to increase
output and make the good or service available to more
people.

2. Competition: A firm may use price discrimination to

drive competitors out of business. This is known as
predatory pricing. For example, a firm may use profits
where it has a monopoly to subsidize its prices and
thereby drive competitors out of business, only then to
raise prices above those the competitors had been
charging. On the other hand, a firm might use the profits
from its high priced market to break into another market
and withstand a possible price war. Competition is
thereby increased.

3. Profits: Price discrimination raises a firm’s profits. This

could be seen as an undesirable redistribution of income
in society, especially if the average price of the product is

CEDAR COLLEGE
 raised. On the other hand, the higher profits may be
reinvested and lead to lower costs in the future.

4. Output under price discrimination: would generally be

larger than under a single price monopoly. This would
reduce the dead weight loss of monopoly and could
mean a more efficient allocation of resources than under
single price monopolist.

FIGURE 4.23 Price discrimination output

DWL Under Single Price

Monopolist= Area 4
+5+6

DWL Under Price

Discriminating
Monopolist = Area 6

CEDAR COLLEGE