www.myuwell.com Manufactured by SHENZHEN UWELL TECHNOLOGY CO., LTD. ©2022 By SHENZHEN UWELL TECHNOLOGY CO., LTD., All Rights Reserved. Designed by UWELL Made in China i ey) ESA a IG (GB) ewettecn EQ vvecttesn | ees | oS ies eo rrCALIBURN CALIBURN X Pod System User ManualIllustration Drip Tip Refillable Pod Coil ————} Airflow Control Valve | Fire Button Device Panel ; Screen CALIBURN Type-C Port <<) Quick Guide 1. Install coil. 2. Insert the pod into the device. 3. Remove the drip tip to reveal the filling port. 4. Fill e-liquid through the filling port, put the cap on the refillable pod, sit for 10 minutes. 5. Press the fire button 5 times within 2 seconds to turn on, draw or press the button to vape. -1-(_PRe CALIBURN 4 Intelligent firing Button lock function channel detection Large battery Adjustable output capacitySpecifications e Materials: PCTG. AL 6063 e Dimensions: 107.4 mm x 27.5 mm x 15.6 mm e Net Weight: 46 g e E-Liquid Capacity: 3 ml e Output Power: 5 W - 20 W ¢ Coil Specifications: FeCrAl UN2 Meshed-H 0.8 Q CALIBURN G Coil FeCrAl UN2 Meshed-H 1.2 Q CALIBURN G2 Coil FeCrAl 1.0 Q CALIBURN G Coil (Available Separately) e Battery Capacity: 850 mAh The Packaging Includes e 1 x CALIBURN X Device e 1 x CALIBURN X Empty Cartridge e 1 x UN2 Meshed-H 0.8 Q CALIBURN G Coil (Pre-installed) e 1 x UN2 Meshed-H 1.2 Q CALIBURN G2 Coil (Spare) e 1 x Type-C Charging Cable e 1 x User Manual Features 1. Refillable pod with magnets, easy and convenient. 2. Compatible with Caliburn G coils. 3. An unparalleled vaping experience is brought by proprietary PRO-FOCS flavor testing technology from UWELL. 4. Stable, safe, and reliable performance is ensured by a built-in safety mechanism. 5. Stylish appearance, aluminum alloy one-piece molding. Ergonomic design for a more comfortable grip. 6. Sandblasting oxidation finish with elegant colors. 7. Battery capacity is 850 mAh. E-liquid capacity is 3 ml. 8. Type-C fast charging, charge up to 90% of battery in an hour. 9. Large e-liquid window makes users check the ‘MIN’ mark conveniently. 10. OLED display screen, adjustable output, adjustable airflow, easy to operate. 11. Equipped with intelligent firing channel detection. 12. Button lock function to prevent false triggering. -3-Instructions . How to fill the pod . Install coil. . Insert the pod into the device. . Remove the drip tip to reveal the filling port. . Fill with e-liquid. . Put the drip tip cap on. fal m1 (@) |. a eo20o0n09 = ‘ 2 | Attention: a. When installing a coil, please make sure the coil aligns with the locating slot in the cartridge. b. When filling e-liquid, please fill through the red filling port. Do not fill the e-liquid through the airway in the middle. c. Do not leave the cartridge without the cap on. Put the drip tip cap on securely right after filling to prevent e-liquid leak. d. After the first e-liquid filling, please let it sit for 10 minutes to avoid coil burning. e. Please refill e-liquid when the e-liquid reaches the “MIN” level. -4-2. How to adjust airflow Slide the side airflow control valve to adjust airflow. Ha 3. Replacing coil a. Remove the used coil from the cartridge. Install a new coil. b. After filling the new pod cartridge, please let the pod sit for 10 minutes to avoid coil burning. Device Instructions 1. Turn on/Turn off Press the fire button 5 times within 2 seconds to turn on/off the device. The display shows "UWELL" when power is on and the display shows "Goodbye" when power is off. 2. Standby Wan 2fiqan0g The device will switch to standby mode after 8 seconds without any operation. 3. Vaping time The device will display the warning “OVER 8S!” and stop output in the case of vaping for over 8 seconds. 4, Lock/Unlock Press the fire button 2 times in a row to lock or unlock the fire button. 5. Wattage adjustment Press the fire button 3 times in a row, the power display area flickers, and power adjustment mode starts. Press or hold the fire button, output power -5- seaaany 07 ED repo BD 4 (oodisplays from 5W to 20W. After 3 seconds of no operation, the power value is automatically saved. The power display area stops flickering and the power adjustment mode is exited. The recommended wattage range of the 0.8Q coil is 13-18W. The recommended wattage range of the 1.0Q coil is 10-15W. The recommended wattage range of the 1.20 coil is 9-13W. 6. Puff counter The puff counter will only record vapes that last over 1 second. The maximum is 999 puffs. Press the fire button 4 times in a row, the puff record flickers, and the puff clearing mode starts. One press on the fire button will clear the puff to OOOP, and another press on the fire button will cancel the clearing operation. Holding the fire button or 3 seconds of no operation will stop flickering and exit clearing puff mode. The record will remain the same as your last operation before the exit. 7. Resistance detection Resistance detection of the coil would be done automatically. Detection ranges from 0.80 to 1.2Q. a. “No Atomizer” indicates the device is fired without a coil or the coil resistance is beyond e e detection range. z| |g b. “Atomizer short” indicates a short circuit of f z resistance too low. 8. Low power protection >| “Low Battery” indicates the device is fired with a a low battery. a 9, Charging Please use a Type-C charging cable with a 5V/2A adaptor. During charging, the battery icon on the display shows a moving state. a. When the device is off, the display shuts down [n=] after the device is fully charged. g 1 b. When the device is on, the display shuts down fant (OL: after the device is fully charged. -6-Attention 1. Please charge with certified high-quality adaptor from a reputable company and a USB cable with the charging current of 5V/2A. 2. The device and adaptor may warm up when charging, keep away from flammable and explosive goods. 3. Please use a dry and soft cloth to clean the device. Keep away from water or any liquids. 4. Please remove the pod cartridge and store it separately when you are on a plane to avoid leakage due to pressure changes. 5. Please do not put the device in your pocket with other hard objects to avoid damages. . Please turn off the device when it is not in use. . Please charge the device at least once a month. . Don’t disassemble the device. . Avoid high temperature, low temperature and humidity during use or storage to avoid damage to the equipment. 10. The product parameters or pictures in this manual are for illustration purpose only, please refer to the actual product. OMND Safety Instruction Please read the following safety instructions carefully before using the product. 1. This product is only available to people who have reached the legal age of smoking. It is strictly forbidden for young children, pregnant women and women during breastfeeding or for patients with heart disease, high blood pressure, diabetes, depression and asthma. 2. Please put the product out of reach of children and pets to avoid injury. 3. When using this product, please keep away from inflammable and explosive materials to avoid injury. 4. The company does not assume any responsibility for any equipment damage or personal injury caused by user misuse. -7-Warranty Details Please keep the anti-counterfeit code and proof of purchase after purchasing the product. The warranty period is 180 days from the date of purchase. Our company provides warranty service (Device and atomizer only, exclude coil head and pod cartridge). Please note that any of the following conditions are not covered by the warranty: 1. Exceeding the warranty period. 2. Damage caused by the use, maintenance, and storage that is not in accordance with the requirements as instructed. 3. Damage caused by unauthorized repair. 4, Damage caused by the usage of non-UWELL components. 5. Damage caused by force majeure. Verification 1. Visit the UWELL official website www.myuwell.com through a smartphone or PC. 2. Please enter the 16 digits authentic code, and the result will be displayed in a few seconds. 3. Please feel free to contact UWELL via e-mail, phone or website for more help. Customer Service We pride ourselves on manufacturing quality products and providing excellent customer service. For any issues, please contact us at [email protected]. * UWELL reserves the right of final interpretation in the user manual. * It is hereby stated that the markable area on the product is not enough to mark the CE and WEEE as the standard dimensions.