Scribd
Upload
39 views2 pages

2.0 Eng

The document describes the LANX 2.0 system which allows vehicles to monitor weight in real time. It displays weight axle by axle and protects against overloading. The system uses digital sensors and has various functions like alarms and diagnostics.

Uploaded by

Grafi Pack
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
39 views2 pages

2.0 Eng

The document describes the LANX 2.0 system which allows vehicles to monitor weight in real time. It displays weight axle by axle and protects against overloading. The system uses digital sensors and has various functions like alarms and diagnostics.

Uploaded by

Grafi Pack
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ADVANTAGES

• Convenient on-board weighing during


loading
• No fine for overloading
• Protection against early wear of the
vehicle
• Payload within legal limits
• Reusable system
• Automatic management of an unlimited
number of trailers and semi-trailers
The control unit of the LANX 2.0 system is directly
installed in the driver’s cab and displays the weight loaded
on-board in real time. Readings are displayed axle by axle, FUNCTIONS
net and gross or partial. LANX 2.0 uses a variety of digital
sensors positioned on the vehicle’s suspensions and • Net, gross weight and axle by axle
displays all data on an easy to read display, without
• Partial weight
having to push any keys. In addition, weight data can be
printed by on-board mini-printer and it can also connect to • Programmable alarm limits for loading/
any satellite system. The system pays for itself overloading
immediately because knowing the weight of the load • Plate tractor and trailer
when you travel means optimizing transport times and
• Diagnostics
economic yield in complete safety.

TECHNICAL DATA

Display Back-lit LCD 2x16 characters


Screen Ton or kilogram
Multilingual
Working temperature 0°÷50° C
Power supply 18÷30 Vdc
Protection level IP40
Max current 0.5A a 24 Vdc
Dimensions 132x100x42mm without flange
Colour Metallized grey
Optional Paper roll printer
Transmission data cable RS232
VEHICLES WITH AIR OR HYDRAULIC SUSPENSIONS
pressure sensor 10 bar

The digital sensors, which are installed on the tractor rear pneumatic suspensions (1)
and on the trailer pneumatic/hydraulic suspensions (2), record the pressure variation
due to the weight loaded on the vehicle, by sending data to the LANX unit located in
the cab.

pressure sensor 10 bar


Accuracy: 0÷1% pressure sensor 160 bar

Technical data Sensor 10 bar Sensor 160 bar


Range 010 Bar 0160 Bar
Safe overload 150% 150%
Working temperature -40° ÷ +85° C -40° ÷ +85° C
Protection level IP65 IP65
Dimensions 145x72x35 mm 145x72x35 mm
Weight 300 gr 400 gr

VEHICLES WITH MIXED SUSPENSIONS

height sensor

The digital sensors, located on the different axles of the vehicle, allow to check both
the whole load and its distribution during the process of stowage, by sending data to
the LANX unit located in the cab. It is also very helpful when an axle by axle load limit
is required.
pressure sensor 10 bar
Accuracy: 0÷2%

Technical data Sensor 10 bar Height sensor


Range 010 Bar ± 80°
Safe overload 150% -
Extra stroke - ± 180°
Working temperature -40° ÷ +85° C -40°÷ +85° C
Protection level IP65 IP65
Dimensions 145x72x35 mm 145x72x35 mm
Weight 300 gr 650 gr

VEHICLES WITH REAR DUMP TRAILER


pressure sensor 160 bar loading cells 10.000 kg

The two loading cells located among the dumper rear hinges (2 or 2a) and the pressure
sensor installed on the lifting cylinder (1), enable to record the loaded weight by lifting
up the dump body a few inches and by sending data to the LANX unit located in the
cab.

Accuracy: 0÷0,5%
loading cells 20.000 kg

Technical data Sensor 160 bar 10.000 kg 20.000 kg


Range 0160 Bar - -
Safe overpressure 150% - -
Loading capacity - 10.000 kg 20.000 kg
Safe overload - 300% 300%
Working temperature -40° ÷ +85° C -40° ÷ +85° C -40° ÷ +85° C
Protection level IP65 IP67 IP67
Dimensions 145x72x35 cm 380x100x39 cm Ø 60x357 cm
Weight 400 gr 11,5 kg 8,5 kg

Outset® Srl Benefit Company reserves the right to update or modify the products or the functionality described at any moment without prior notice.
All intellectual property rights related to the Company and/or the products are the exclusive property of Outset® Srl Benefit Company.

You might also like