SMART WI-FI

FLOODLIGHT
CAMERA
START GUIDE
Thank you for purchasing your GEENI smart home product. What’s in the Box
Get started using your new devices by downloading Geeni, one
convenient app that manages everything straight from your
phone or tablet. Easily connect to your home Wi-Fi and control
multiple devices from the touch of your fingertips.

Contents SMART WI-FI

OUTDOOR
CAMERA
START GUIDE
Mount and Wire 2-5

Download & Register 6-8 • Smart Floodlight + Security Camera • Allen Wrench
• Bracket + Internal Grip • Wire Nuts
Connect to App 9 • Mounting Screws • Reset Pin
• Mounting Bracket • User Manual
Connect (Easy Mode) 10-11 • Waterproof Connector

Connect (QR Code Mode) 12-13 Get Ready

• Know your Wi-Fi network and password
Live View & Playback 14-15 • Locate a suitable mounting location
• Make sure your mobile device is running iOS® 9 or higher or
Settings16-17 Android™ 5.0 or higher
• Make sure you’re connecting to a 2.4GHz Wi-Fi network
Questions, Troubleshooting, Notices 18-21 (Geeni can’t connect to 5GHz networks)
 1 Mount and Wire

Mounting Breakdown WARNING: Risk of electric shock

Mounting • AC 100~240V Power connection. Verify that the supply voltage is correct
Bracket • Disconnect Power before operation. Use your home’s circuit breaker to
switch off power. This protects you and your camera.
Wire Nuts Screws
• Properly ground fixture
• Always follow code standards when installing wired connections
• Consult an electrician if necessary
CAUTION: Risk of fire, do not install near combustible surfaces

Line Neutral Ground STEP 1.

Bracket Feed floodlight wires through
*Optional Installation: Screws Bracket the bracket and connect Line,
Waterproof Connector
Neutral, and Ground (if needed)
Wires with provided Wire Nuts.
*If the wires are placed in an outdoor environment, it is
suggested to install the included waterproof connector
(instead of using the wire nuts). STEP 2.
Place adhesive interior grip
OFF
ON

Shut off power at the circuit breaker for the switch that you inside of bracket and use
are replacing. More than one disconnection may be required the included 3 screws and
to turn off power. Use a non-contact voltage tester to ensure 3 wall anchors to mount the
that power is off. camera wherever you like.

2 3
 1 Mount and Wire (Continued)

STEP 3. STEP 4.
Attach the floodlight to the Finally, use included allen wrench and
mounted bracket. Camera adjust allen screws to ensure the device
should be 9 Ft from the ground has the optimal viewing angle.
for optimal sensor detection.

A
B
C

Optional:

NOTE: Now your device should be

9 Ft
A. Fix the camera position powered and ready to pair
B. Adjust the angle with the Geeni app.
C. Adjust the direction and
fix the camera position

Mounting
Bracket

4 5
 2 Download the Geeni app from App Store or Google Play. 3 Register an account on your Geeni app.

STEP 1. STEP 2.
Enter your mobile phone number Enter the verification code
or email address. and create a password.

6 7
 4 Login to the Geeni App. 5 Connect to App.

How do I reset my device?

A reset button is located under the cover on the bottom of your floodlight.
Reset the camera by removing the cover and holding down the button for
several seconds.
Reset Button

Reset Pin

(Close Up View)
(Bottom View)

Note: The camera will appear inactive while booting up—allow two minutes
for the light to activate.

What does the blinking sensor light mean?

STEP 3.
Login to the App.

Solid Red Blinking Red Blinking Blue Solid Blue

Starting up Ready to connect Connecting Connected

8 9
 6 Add device. Method 1: Easy Mode

STEP 1. STEP 2. STEP 3. STEP 4.

In the Geeni app, on the top Make sure the indicator light on the Enter your Wi-Fi network and The Geeni app will try to connect
corner of the Devices screen, device is blinking Red, indicating the password. your device.
click (+). device is ready to connect. If not, follow During this time, the camera will
Choose “Video Camera“. instructions to Reset the device so that beep, continue blinking Red, and
indicator light is blinking red, then turn solid Blue.
then press “Next Step”.
NOTE: Geeni can’t connect to 5GHz networks.
*If the connection fails, try to reset and connect directly using QR Code Mode.
10 11
 7 Add device. Method 2: Backup QR Code Mode

STEP 1.
Make sure the device is blinking red.
(see reset instructions on p. 9)

QR Code

STEP 2.
In the Geeni app, on the top corner STEP 3. STEP 4. STEP 5.
of the Devices screen, click (+). Click Next and enter your Scan the QR Code with the If you heard the camera beep,
Choose “Video Camera“. Wi-Fi details. camera. press “I heard the beep“ and it will
Choose “QR Code” in the top corner. add your camera.

12 13
 Live View Playback

Hear what’s happening around

the camera Hear what’s happening around
the camera

Full screen
Save the live camera footage
onto your phone memory Full screen

Press to activate the microphone

and speak through the camera.

Save a screenshot of live video

onto your phone memory Jump to recent motion events.
Play back recorded footage
(microSD card required) Save the playback footage
onto your phone memory
Playback Motion Floodlight
Activate floodlight manually or
at scheduled times Save a screenshot of playback
footage onto your phone memory
Activate push notifications to be
notified of any movement (see p. 17) Change date of video playback

Buzzer Activate buzzer to scare intruders

and alert neighbors

14 15
 Settings

Motion
Device Security Camera

Device sharing

Device Info

Basic Feature Settings

SD Card Settings Schedule

IR Night Vision Auto
Customer Support Floodlight

Firmware Info

Indicator Light: By default, the camera lights up to show it’s on. Switch
“Indicator Light” off to hide the light.

Access Camera Settings: Flip: If you mount your camera upside down, toggling the “Flip” function
From your main device list, click on the camera you want to edit, then will rotate the image so that it’s right side up.
press “ “ button on the top right for advanced settings. Time Watermark: Turn the time watermark on to always see a time
Device Name: Press to rename your device to something like “Backyard” stamp of when video is taking place.
or “Driveway”. Motion Detection: When turned on, you’ll receive notifications to your
Device Sharing: Let friends, spouse, roommates, or family keep an eye phone whenever the camera senses motion. Press to turn Motion
on what your cameras see. Whether it’s the patio or the side entrance, you Detection off, schedule motion alerts and/or control floodlight duration.
can decide who gets to check in, access the camera, and set notifications. Night Vision: The camera is set to automatically activate night vision in
Remove Device: the dark. Toggle here to manually turn night vision on or off.
Delete the camera from your account. Until it’s deleted, it will always be SD Card Settings:
linked to your account. SD Card options includes erasing your microSD Card.
16 17
 Frequently Asked Questions

1. Can I share with family and friends? 4. How Many Cameras Can I Control?
Yes, you can share your cameras with family and friends who will have Geeni’s app can control an unlimited amount of devices in an unlimited
access to view the camera and control your bulbs, plugs, and other amount of locations. Your router may have a limit of how many devices can
Geeni devices. In the Geeni app, press the Profile button and click on the be connected to one router.
“Device Sharing” button, and you will be able to give or revoke sharing
permissions. In order to share, the other user should already have 5. My Geeni device has a funny name. How do I rename it?
downloaded the Geeni app and registered a new account. From your main device list, click on one of the devices you want to rename,
press the “ ” button on the top right for advanced settings, and click
2. Recording and Micro SD Card Usage: Modify Device Name. You’ll then be able to choose a more familiar name.
Without a Micro SD card (optional, sold separately), the smart Wi-Fi
camera can show live camera video, save screenshots or videos of the 6. The device appears offline or unreachable, what should I do?
camera stream to your phone for later, and record still snapshots of Make sure your Wi-Fi router is online and in range.
motion alerts when notifications are turned on. Make sure you have the latest Geeni functionality by clicking “Check for
Installing a Micro SD card will further enable video recording and firmware update” in your device settings.
playback from your phone. When the card is installed, the camera will
continuously record and play back video to your phone until the card 7. What’s the Wireless Range?
is full (up to 128GB supported). Video is encrypted and only viewable The range of your home Wi-Fi is heavily dependent on your home router
through the Geeni app on your phone, so do not try removing the Micro and the conditions of the room. Check with your router specifications for
SD card to view video. exact range data.

3. How Much Video Can The Camera Record? 8. If my Wi-Fi/Internet goes down, will Geeni still work?
Depending on video quality, the camera will use around 1gb of storage Geeni products need to be connected to Wi-Fi in order to use them remotely.
per day, so a 32GB card can provide weeks of continuous video. As the
card fills up, the oldest footage will automatically be replaced by new
video, so you don’t have to ever worry about running out of storage space.

18 19
 Troubleshooting FCC Notice:
This device complies with Part 15 of the FCC Rules. Operation is subject to the two following
conditions:
Cannot connect to your Wi-Fi network: 1. This device may not cause harmful interference.
Make sure you entered the correct Wi-Fi password during the Wi-Fi 2. This device must accept any interference received, including interference that may cause
setup. Check whether there are any Internet connection problems. If the undesired operation.
Wi-Fi signal is too weak, reset your Wi-Fi router and try again.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.

System Requirements
• Mobile device running iOS® 9 or higher or Android™ 5.0 or higher
• Existing Wi-Fi Network

Support:
If you encounter any issues, please visit us at support.mygeeni.com for help.
To explore our full selection of products, visit us at: www.mygeeni.com
(888) 232-3143 Toll-free (English Only)

© 2020 Merkury Innovations • 45 Broadway 3rd FL, New York NY 10006.

Technical Specifications The illustrated product and specifications may differ slightly from those supplied. Geeni is a trademark of Merkury
Innovations LLC. iPhone, Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other
countries. App Store is a service mark of Apple Inc. Galaxy S is a registered trademark of Samsung Electronics
• Camera: up to 1080p (1920x1080P) • Storage: supports up to 128gb Co., Ltd. Google, Google Play, and related marks and logos are trademarks of Google LLC. iOS is a registered
trademark of Cisco in the U.S. and other countries and is used under license. Amazon, Alexa and all related logos
at 25 frames / sec. H.264 encoding microSD card (not included) are trademarks of Amazon.com, Inc. or its affiliates. All other trademarks and trade names are those of their
• Field of View: 140º • Wi-Fi: IEEE 802.11B/G/N, 2.4GHz respective owners.
Made in China
• Weatherproof: IP54 (not compatible with 5GHz Wi-Fi networks)

20 21
 Can’t connect? Need help?

DO NOT RETURNTHIS
PRODUCT TO THE STORE
Geeni support:
support.mygeeni.com
(888) 232-3143 Toll-free (English Only)
or tap ‘Support’ for help in the Geeni app.