2007

www.firestone.eu

TECHNICAL DATA
Agricultural Tyres
 preface

T
his manual has been prepared to help you obtain the maximum safety and
value from Firestone tyres. While not completely comprehensive, it provides
useful definitions, advice on proper selection and care, and lists the detailed
specifications of a wide range of patterns and sizes. We hope that you will get the
very most out of our high quality products. Further information or advice on FS
tyres can be obtained from the Technical Service Division of Firestone.

Loads or Inflation Pressures not shown for

! any tyre are not permitted without express per-
mission of the manufacturer.

2
 contents

• AGRICULTURAL TYRES LISTED BY size ……………………………………………………………………………………………………………………………………………………… P 4-5

• RADIAL DRIVE TYRES
Presentation ………………………………………………………………………………………………………………………………………………………………………………………………… P 8-14
65 Series ……………………………………………………………………………………………………………………………………………………………………………………………………………………… P 15
70 Series ………………………………………………………………………………………………………………………………………………………………………………………………………… P 16-18
85 Series ………………………………………………………………………………………………………………………………………………………………………………………………………… P 19-24
High Speed Application …………………………………………………………………………………………………………………………………………………………………… P 25
Severe Service ………………………………………………………………………………………………………………………………………………………………………………………………… P 26
High Volume Application ……………………………………………………………………………………………………………………………………………………………… P 27
Combine/Harvester Application ……………………………………………………………………………………………………………………………………… P 28
Row Crop Application ……………………………………………………………………………………………………………………………………………………………… P 29-30
• BIAS DRIVE TYRES
Presentation ……………………………………………………………………………………………………………………………………………………………………………………………… P 32-33
Traction Rear …………………………………………………………………………………………………………………………………………………………………………………………… P 34-35
Front & Implement/Rancher ………………………………………………………………………………………………………………………………………… P 36-37
Combine/Harvester Application ……………………………………………………………………………………………………………………………………… P 37
• FREE-ROLLING TYRES
Presentation ………………………………………………………………………………………………………………………………………………………………………………………………………… P 40
Front Steering ………………………………………………………………………………………………………………………………………………………………………………………… P 41-42
Free-Rolling Implement …………………………………………………………………………………………………………………………………………………………………… P 43
Grassland Application ……………………………………………………………………………………………………………………………………………………………… P 44-45
• FLOTATION TYRES
Presentation ………………………………………………………………………………………………………………………………………………………………………………………………………… P 48
Load and Inflation Tables ………………………………………………………………………………………………………………………………………………… P 49-51
• INDUSTRIAL TYRES
Presentation ……………………………………………………………………………………………………………………………………………………………………………………………… P 54-57
Load and Inflation Tables ………………………………………………………………………………………………………………………………………………… P 58-63
• FORESTRY TYRES
Presentation ……………………………………………………………………………………………………………………………………………………………………………………………… P 66-67
Load and Inflation Tables ………………………………………………………………………………………………………………………………………………… P 68-69
• WARNING & SAFETY PRECAUTIONS ………………………………………………………………………………………………………………………………………………………… P 70-73
• HYDRO-INFLATION …………………………………………………………………………………………………………………………………………………………………………………………………………… P 74-75
• SIZE MARKINGS - SPEED SYMBOLS - LOAD INDEXES …………………………………………………………………………………………………………………… P 76
• SIZE CONVERSION CHART ………………………………………………………………………………………………………………………………………………………………………………………………… P 77
• TEST CENTRES ………………………………………………………………………………………………………………………………………………………………………………………………………………………………… P 81
• ADDRESSES …………………………………………………………………………………………………………………………………………………………………………………………………………………………… P 82-83

LEGEND:

Unloaded Overall Static Rolling

Inflation
section diameter loaded circumfe- Recom- Permissible Speed
pressure
width unloaded radius rence mended rim rims (Km/h)
(kPa)
(mm) (mm) (mm) (mm)

1 inch = 25.4 millimeters = 2.54 centimeters

1 psi = 6.895 kilopascal (kPa) = 0.06895 bar

3
 ALL AGRICULTURAL
TYRES LISTED BY SIZE
GENERAL INFORMATION

Tyre Size LI* SS* PR* TL/TT Pattern OD* Page Tyre Size LI* SS* PR* TL/TT Pattern OD* Page Tyre Size LI* SS* PR*
8 4.00 - 8 02 TT T114 440 37 18 7.50 - 18 08 TT 3RIB 860 41 24 14.9 - 24 12
8 4.00 - 8 02 TT T114 440 37 7.50 - 18 08 TL 4RIB 860 41 14.9 R 24 126 A8
10 5.0 - 10 02 TT T131 515 37 7.50 - 18 08 TL RIB 866 41 380/85 R 24 131 A8
12 4.00/5 - 12 02 TT T114 528 37 7.50 - 18 10 TT RIB 866 41 380/70 R 24 125 A8
4.00 - 12 04 TT RIB 534 41 7.50 R 18 104 A8 TL R4000 850 19 400/80 - 24 156 A8
4.00 - 12 04 TT T133 541 37 10.00 - 18 08 TT FARM 875 43 400/80 R 24 156 A8
5.00 - 12 06 TT T133 572 37 10.5/80 - 18 10 TL ATU 920 61 400/70 R 24 158 A8
6 - 12 02 TT TC 574 37 280/70 R 18 114 A8 TL R4000 855 16 16.9 - 24 06
6.5/80 - 12 02 TT T131 588 37 12.0/12.5 - 18 08 TL ATU 953 61 16.9 - 24 10
7.00 - 12 06 TT RIB 661 43 12.0/12.5 - 18 12 TL ATU 953 61 16.9 R 24 134 A8
7.00 - 12 06 TT T133 670 37 12.5 - 18 10 TL STL 990 59 420/85 R 24 137 A8
8.50 - 12 06 TT RIB 716 43 12.5/80 - 18 12 TL 4RIB 965 42 420/70 R 24 130 A8
11.0/65 - 12 06 TT T133 718 37 340/80 R 18 136 A8 TL R8000UT 1005 60 440/65 R 24 128 A8
26X12.00 - 12 04 TL RIBIMP 640 43 340/80 R 18 143 A8 TL DURAFUT 1008 58 17.5L - 24 10
26X12.00 - 12 04 TL FLT23 663 49 13.0/65 - 18 14 TT FARM 875 43 460/70 R 24 150 A8
26X12.00 - 12 08 TL FLT23 663 49 400/70 R 18 147 A8 TL DURAFUT 1017 58 18.4 - 24 12
14 11L - 14 08 TL FARM 747 43 19 4.00 - 19 04 TT RIB 714 42 480/70 R 24 138 A8
15 4.00 - 15 04 TT RIB 610 43 4.50 - 19 02 TT T131 737 36 480/65 R 24 133 A8
5.00 - 15 02 TT T114 654 37 6.00 - 19 06 TT RIB 812 42 19.5L - 24 12
5.00 - 15 06 TT RIB 654 41 19.5 15 - 19.5 12 TL STDUP 1036 63 19.5L R 24 146 A8
8.0/75 - 15 06 TT T133 708 37 20 6.00 - 20 10 TT B213 844 43 540/65 R 24 140 A8
8.25 - 15 18 TT B213 838 43 6.50 - 20 06 TT RIB 850 42 25 800/50 - 25 12
27X8.50 - 15 06 TL DURAFDT 678 63 7.50 - 20 06 TT RIB 906 42 67X34.00 - 25 12
215/70 - 15 08 TL DURAFDT 678 63 7.50 - 20 06 TT 3RIB 909 42 54X37.00 - 25 12
9.5L - 15 08 TL FARM 762 43 7.50 - 20 06 TT T131 915 36 66X43.00 - 25 10
260/65 - 15 08 TL DURAFDT 691 63 9.5 - 20 06 TT ATC 950 34 66X43.00 - 25 10
31X13.50 - 15 08 TL TURF & FIELD 777 44 9.50 - 20 08 TT 3RIB 970 42 66X43.00 - 25 16
31X15.50 - 15 08 TL FLT23 792 49 10/10.5 - 20 10 TT ATU 986 61 1050/50 R 25 172 A8
390/60 - 15 08 TL DURAFDT 792 63 280/70 R 20 116 A8 TL R4000 906 16 1050/50 R 25 172 B
15.3 27X10 - 15.3 08 TT T133 687 37 300/70 R 20 120 A8 TL R4000 939 16 66X44.00 - 25 06
10.0/75 - 15.3 08 TT T133 780 36 12.5 - 20 10 TL ATU 1016 61 66X44.00 - 25 16
10 - 15.3 10 TT FARM 784 43 320/70 R 20 123 A8 TL R4000 985 16 26 14.9 R 26 132 A8
11.5 - 15.3 12 TT FARM 860 43 340/80 R 20 144 A8 TL DURAFUT 1052 58 420/85 R 26 138 A8
11.5/80 - 15.3 12 TT T131 873 36 360/70 R 20 129 A8 TL R4000 1056 16 18.4 - 26 06
11.5 - 15.3 16 TT FARM 860 43 365/80 R 20 144 A8 TL DURAFUT 1092 58 18.4 - 26 10
16 5.50 - 16 06 TT RIB 716 41 400/70 R 20 149 A8 TL R8000UT 1068 60 18.4 - 26 10
5.50 - 16 06 TT 3RIB 716 41 400/70 R 20 149 A8 TL DURAFUT 1068 58 18.4 - 26 12
6.00 - 16 06 TT 3RIB 735 41 42X25.00 - 20 08 TL FLT23 1074 49 18.4 - 26 12
6.00 - 16 06 TT T133 751 36 42X25.00 - 20 12 TL FLT23 DT 1113 49 18.4 R 26 140 A8
6.00 - 16 06 TT RIB 752 41 48X25.00 - 20 10 TL FLT23 1232 49 480/80 R 26 160 A8
6.50 - 16 06 TT RIB 745 41 48X25.00 - 20 10 TL FLT23 DT 1295 49 23.1 - 26 10
6.50 - 16 06 TT 3RIB 762 41 48X31.00 - 20 10 TL FLT23 DT 1295 49 23.1 - 26 12
6.50 - 16 08 TT T133 777 36 48X31.00 - 20 14 TL FLT23 1232 50 23.1 - 26 14
7.00 - 16 08 TT RIB 774 41 48X31.00 - 20 14 TL FLT23 DT 1295 50 23.1 - 26 14
7.50 - 16 06 TT 3RIB 813 41 21 4.00/4.50 - 21 04 TT RIB 764 43 23.1 - 26 14
7.50 - 16 08 TT RIB 798 41 5.00/5.25 - 21 06 TT RIB 812 43 28L - 26 12
7.50 - 16 08 TT T133 800 36 22.5 15 - 22.5 16 TL STDUP 1085 63 28L - 26 12
7.50 - 16 08 TT 3RIB 805 41 18 - 22.5 16 TL STDUP 1166 63 28L - 26 14
7.50 - 16 10 TT RIB 798 43 600/55 - 22.5 16 TL FLTIMP 1270 49 28L - 26 14
7.50 R 16 102 A8 TL R4000 792 19 700/50 - 22.5 16 TL FLTIMP 1270 43 28L - 26 16
9.00 - 16 10 TL 4RIB 855 41 24 8.3 - 24 04 TL ANS 986 44 28L - 26 16
10.00 - 16 10 TL 3RIB 895 41 9.5 - 24 04 TT ANS 1011 44 28L - 26 16
10.50 - 16 14 TT FARM 955 43 9.5 - 24 04 TT ATFR 1046 34 26.5 600/55 - 26.5 20
11.00 - 16 08 TL 3RIB 965 41 9.5 - 24 06 TT ATC 1040 34 700/50 - 26.5 20
11.00 - 16 08 TL 4RIB 965 41 250/85 R 24 109 A8 TL R6000 1042 19 28 250/85 R 28 112 A8
11.00 - 16 12 TL 4RIB 965 41 11.2 - 24 04 TL OCM UR 1097 34 11.2 - 28 06
280/70 R 16 112 A8 TL R4000 805 16 11.2 - 24 08 TT ATC 1100 34 11.2 R 28 116 A8
16.1 13.50 - 16.1 10 TL ANS 1031 44 11.2 R 24 114 A8 TL R7000 1080 19 280/85 R 28 118 A8
16.5L - 16.1 06 TL ANS 1036 44 280/85 R 24 115 A8 TL R6000 1095 19 12.4 - 28 06
16.5L - 16.1 08 TL FARM 1013 43 12.4 - 24 06 TL SAT 1150 34 12.4 R 28 121 A8
16.5L - 16.1 10 TL ANS 1036 44 12.4 - 24 08 TT ATC 1143 34 320/85 R 28 124 A8
18.4 - 16.1 06 TL ANS 1107 44 12.4 - 24 12 TT ATU 1138 61 13.6 - 28 06
21.5L - 16.1 06 TL TURF & FIELD 1120 44 12.4 R 24 119 A8 TL R7000 1127 19 13.6 - 28 06
21.5L - 16.1 14 TL FARM 1105 43 320/85 R 24 122 A8 TL R6000 1150 19 13.6 - 28 08
16.5 10 - 16.5 06 TL STDUP 795 63 320/70 R 24 116 A8 TL R6000 1096 16 13.6 R 28 123 A8
265/70 - 16.5 08 TL DURAFDT 772 63 13.6 - 24 06 TT ATC 1200 34 340/85 R 28 127 A8
12 - 16.5 08 TL STDUP 826 63 13.6 - 24 08 TL SAT 1200 34 360/70 R 28 125 A8
305/70 - 16.5 10 TL DURAFDT 820 63 13.6 R 24 121 A8 TL R7000 1179 19 14.9 - 28 06
395/55 - 16.5 12 TL DURAFDT 838 63 340/85 R 24 125 A8 TL R6000 1200 19 14.9 - 28 08
17.5 14 - 17.5 10 TL STDUP 935 63 360/70 R 24 122 A8 TL R6000 1148 16 14.9 R 28 128 A8
18 7.50 - 18 06 TT T131 863 36 14.9 - 24 04 TL ATFR UR 1270 34 380/85 R 28 133 A8
14.9 - 24 06 TL ANS 1265 44 380/70 R 28 127 A8
4 14.9 - 24 08 TT ATC 1265 34 16.9 - 28 08
 ALL AGRICULTURAL
TYRES LISTED BY SIZE
GENERAL INFORMATION

* PR* TL/TT Pattern OD* Page Tyre Size LI* SS* PR* TL/TT Pattern OD* Page Tyre Size LI* SS* PR* TL/TT Pattern OD* Page
12 TL ATU 1242 62 28 16.9 - 28 10 TT ATU 1428 62 34 520/70 R 34 148 A8 TL R7000 1625 18
8 TL R7000 1246 20 16.9 - 28 14 TT ATU 1428 62 540/65 R 34 145 A8 TL R9000 Evolution 1585 15
8 TL R6000 1245 20 16.9 R 28 136 A8 TL R7000 1423 21 540/65 R 34 152 D TL R9000 Evolution 1565 15
8 TL R6000 1190 16 16.9 R 28 136 A8 TL RCSG 1478 22 600/65 - 34 14 TL FOREST TL 1643 69
8 TL S8000UT 1275 61 420/85 R 28 139 A8 TL R6000 1420 21 600/65 R 34 151 A8 TL R9000 Evolution 1648 15
8 TL R8000UT 1275 60 420/70 R 28 133 A8 TL R6000 1350 17 700/55 - 34 14 TL FOREST TL 1643 69
8 TL R8000UT 1180 60 18.4 - 28 12 TL ATU 1476 62 710/75 R 34 168 A8 TL RATDT 1994 28
06 TL ANS 1308 45 18.4 R 28 141 A8 TL RCSG 1549 22 710/75 R 34 168 A8 TL RATDT 1994 28
10 TL ATU 1318 62 440/80 R 28 156 A8 TL R8000UT 1420 60 36 13.6 - 36 06 TT ATC 1510 35
8 TL R7000 1307 20 440/80 R 28 156 A8 TL DURAFUT 1420 58 13.6 R 36 127 A8 TL R7000 1488 23
8 TL R6000 1320 20 440/65 R 28 131 A8 TL R9000 Evolution 1292 15 38 320/85 R 38 143 A8 TL R9000 1516 29
8 TL R6000 1250 17 480/70 R 28 140 A8 TL R6000 1425 17 13.6 R 38 128 A8 TL R7000 1533 23
8 TL R9000 Evolution 1196 15 480/65 R 28 136 A8 TL R9000 Evolution 1345 15 380/80 R 38 142 A8 TL RATDT 1595 29
10 TL ATU 1242 62 540/65 R 28 142 A8 TL R9000 Evolution 1423 15 15.5 - 38 08 TL SAT23 1550 35
8 TL R8000UT 1245 60 600/65 R 28 154 A8 TL Maxi Traction 1494 26 16.9 - 38 08 TL SAT23 1684 35
12 TL ATU 1374 62 30 14.9 - 30 06 TT ATC 1418 34 16.9 R 38 141 A8 TL R7000 1670 23
8 TL R6000 1323 17 380/85 R 30 135 A8 TL RATFWD 1417 22 420/85 R 38 144 A8 TL R8000 1670 23
8 TL R9000 Evolution 1250 15 16.9 - 30 08 TT ATFR 1478 34 18.4 - 38 08 TT ATC DT 1760 35
12 TL ATU 1308 62 16.9 - 30 08 TT ATC 1485 34 18.4 - 38 08 TL SAT23 1768 35
8 TL RATU 1311 62 16.9 - 30 10 TT ATU 1484 62 18.4 R 38 146 A8 TL R7000 1728 23
8 TL R9000 Evolution 1315 15 16.9 - 30 10 TT FOREST SP 1504 68 18.4 R 38 146 A8 TL RCSG 1775 24
12 TL FLT23 1443 50 16.9 - 30 14 TT ATU 1484 62 460/85 R 38 149 A8 TL R8000 1743 23
12 TL FLT23 1727 50 16.9 R 30 137 A8 TL R7000 1468 22 460/85 R 38 149 A8 TL R8000SS 1750 26
12 TL FLT23 DT 1430 50 16.9 R 30 141 A8 TL RCSG 1529 22 460/85 R 38 149 A8 TL RATDT 1742 23
10 TL FLT23 1689 50 420/85 R 30 140 A8 TL R8000 1469 22 480/70 R 38 145 A8 TL R8000 1675 18
10 TL FLT23 DT 1722 50 18.4 - 30 06 TT ATC 1546 34 480/70 R 38 145 A8 TL R7000 1681 18
16 TL FLT23 DT 1722 50 18.4 - 30 08 TT ATC 1546 34 20.8 - 38 10 TT ATC 1875 35
8 TL FLT23 DT 1709 27 18.4 - 30 08 TT ATFR 1559 34 20.8 R 38 153 A8 TL R7000 1839 24
TL FLT23 DT 1709 49 18.4 - 30 08 TL SAT23 1560 35 20.8 R 38 153 A8 TL RCSG 1859 24
06 TL FLT AT 1702 50 18.4 - 30 12 TT ATC 1546 35 520/85 R 38 155 A8 TL R8000 1830 24
16 TL FLT AT 1702 50 18.4 - 30 12 TT ATC 1546 36 520/85 R 38 155 A8 TL R8000SS 1810 25
8 TL RATFWD 1316 20 460/85 R 30 145 A8 TL R7000 1506 22 520/85 R 38 155 A8 TL RATDT 1835 24
8 TL RATFWD 1384 20 480/70 R 30 141 A8 TL R8000 1480 17 520/70 R 38 150 A8 TL R8000 1750 18
06 TL ANS 1448 45 480/70 R 30 147 D TL R8000 1480 25 520/70 R 38 150 A8 TL R7000 1755 18
10 TT FOREST SP 1445 68 480/70 R 30 152 A8 TL RATDT 1516 17 540/65 R 38 147 A8 TL R9000 Evolution 1683 15
10 TL ANS 1448 45 540/65 R 30 143 A8 TL R9000 Evolution 1485 15 580/70 R 38 155 A8 TL R8000 1830 18
12 TT ATFR 1453 36 540/65 R 30 150 D TL R9000 Evolution 1485 25 600/65 R 38 153 A8 TL R9000 Evolution 1755 15
12 TT ATFR 1453 34 600/70 R 30 158 A8 TL Maxi Traction 1591 26 650/85 R 38 173 A8 TL Maxi Traction 2052 26
8 TL RATFWD 1450 20 23.1 - 30 14 TT ATFR 1694 35 650/65 R 38 157 A8 TL R9000 Evolution 1833 15
8 TL DURAFUT 1428 58 620/75 R 30 163 A8 TL R7000 1676 27 650/65 R 38 163 D TL R9000 Evolution 1818 15
10 TT FOREST SP 1613 68 620/75 R 30 163 A8 TL R7000 1676 28 710/70 R 38 171 A8 TL Maxi Traction 1944 26
12 TL ANS 1516 45 32 24.5 - 32 16 TT FOREST SP 1801 68 800/70 R 38 173 A8 TL RDT23 2080 27
14 TT ATC 1578 34 24.5 - 32 20 TT ATFR 1798 35 42 320/90 R 42 139 A8 TL R9000 1656 29
14 TT ATC 1578 36 650/75 R 32 172 A8 TL RATDT 1791 28 18.4 R 42 148 A8 TL R7000 1857 24
14 TT FOREST SP 1613 68 650/75 R 32 172 A8 TL RATDT 1791 28 18.4 R 42 148 A8 TL RCSG 1900 24
12 TL ANS 1496 45 30.5L - 32 14 TL ANS 1753 45 480/80 R 42 151 A8 TL RAT23 1854 24
12 TL ANS II 1590 45 30.5L - 32 16 TL ANS 1753 45 20.8 - 42 14 TL SAT23 1935 35
14 TT SAT23 1603 36 30.5L - 32 16 TL FOREST SP 1880 68 20.8 R 42 155 A8 TL R7000 1941 24
14 TL FOREST SP 1638 68 30.5L - 32 18 TL FOREST SP SS 1880 68 20.8 R 42 155 A8 TL RCSG 1989 24
16 TL FOREST SP SS 1638 68 800/65 R 32 172 A8 TL RATDT 1862 28 620/70 R 42 160 A8 TL RATDT 1935 18
16 TL ANS 1496 45 800/65 R 32 172 A8 TL RATDT 1862 28 620/70 R 42 160 A8 TL Maxi Traction 1935 26
16 TL ANS II 1590 45 35.5L - 32 16 TT FOREST SP 2012 68 650/65 R 42 158 A8 TL R9000 Evolution 2055 21
20 TL FOREST EL 1341 69 35.5L - 32 20 TL ANS 1986 45 710/70 R 42 173 A8 TL Maxi Traction 2052 26
20 TL FOREST EL 1341 69 73X44.00 - 32 12 TL FLT23DT 1880 51 900/50 R 42 168 A8 TL R9000 1956 27
8 TL R6000 1143 20 73X44.00 - 32 16 TL FLT23DT 1880 51 46 12.4 R 46 133 A8 TL RCSG 1755 29
06 TT ATC 1200 34 78X45.00 - 32 16 TL FLT23DT 2012 51 320/90 R 46 148 A8 TL R9000 1755 29
8 TL R7000 1187 21 68X50.00 - 32 16 TL FLT23DT 1753 51 13.6 - 46 06 TT CSG 1796 35
8 TL R6000 1200 20 76X50.00 - 32 16 TL FLT23DT 1994 51 14.9 R 46 142 A8 TL RAT23 1824 29
06 TT ATC 1260 34 34 320/85 R 34 133 A8 TL R9000 1408 29 14.9 R 46 145 A8 TL RAT23 1824 29
8 TL R7000 1238 21 380/85 R 34 137 A8 TL RATFWD 1519 22 14.9 R 46 149 A8 TL RAT23 1824 29
8 TL R6000 1250 21 385/85 R 34 146 A8 TL RATFWD 1519 29 380/90 R 46 152 A8 TL R9000 1849 30
06 TT ANS 1308 45 16.9 - 34 08 TT OCM 1572 35 420/80 R 46 151 A8 TL RAT23 1860 30
06 TT ATC 1310 34 16.9 R 34 139 A8 TL R7000 1562 23 520/85 R 46 158 A8 TL RATDT 2050 24
08 TL SAT 1313 34 420/85 R 34 142 A8 TL R8000 1570 22 48 230/95 R 48 134 A8 TL R9000 1656 30
8 TL R7000 1294 21 18.4 - 34 08 TL SAT23 1661 35 50 320/90 R 50 148 A8 TL R9000 1857 30
8 TL R6000 1301 21 18.4 - 34 08 TT ATC 1674 35 380/90 R 50 151 A8 TL R9000 1950 30
8 TL R6000 1248 17 18.4 - 34 10 TT FOREST SP 1656 68 54 320/90 R 54 143 A8 TL RATDT 1948 30
06 TT ATC 1367 34 18.4 R 34 144 A8 TL R7000 1628 23 320/90 R 54 149 A8 TL RATDT 1948 30
08 TT ATU 1344 62 460/85 R 34 147 A8 TL R8000 1642 23 380/90 R 54 152 A8 TL R9000 2052 30
8 TL R7000 1344 21 460/85 R 34 147 A8 TL R8000SS 1635 26 * LI : Load Index
8 TL R6000 1345 21 480/70 R 34 143 A8 TL R8000 1575 17 SS : Speed Symbol
8 TL R6000 1290 17 480/70 R 34 143 A8 TL R7000 1568 18 PR : Ply Rating
08 TT ATC 1435 34 520/70 R 34 148 A8 TL R8000 1645 18 OD : Overall Diameter unloaded (mm) 5
 notes

6
AGRICULTURAL
TYRES
Radial Drive Tyres
 RADIAL TYRES

R9000 Evolution
The unique Firestone Radial 9000 Evolution raises the performance standards of 65 Series agricultu-
ral tyres. Combining the proven field capability of the current Radial 9000 with a new level of on-road
comfort, the R9000 Evolution also provides more even wear and longer working life.
Less soil compaction
Flat tread contour and larger footprint
Low soil disturbance
Newly-developed lug shape
More even wear and longer tread life
- New stress-relieved carcass concept
- Wider footprint with larger contact patch
- Cut-resistant construction with Long-Life Compound technology
Improved driver comfort
- Less vibration on road and field due to flattened crown profile,
special belt construction and tread pattern
- Reduced road noise from improved pitch sequence and lug
profile versus R9000
Excellent traction in the field
Optimised lug design proven in independent trials
Excellent self-cleaning
Optimised shape lug design

R9000 Evolution - Result of test performed at DLG (Germany)

Vibration test (Comfort) performed at DLG (Germany) in August 05 showed that

Firestone 9000 Evolution compared to its main competitors (Premium brands):
- was on average below or equal in vibration (Comfort) from 26km/h to 48 km/h (See graph)
- was better in terms of steering response.
The R9000 Evolution has been developed to match European farmers needs of 65 series.

Accelaration in Z - direction in m/s <

_

0,8

0,6

Firestone R9000 Evo

0,4 Competitor 1
Competitor 2
Competitor 3

0,2

0,0 Tractor speed km/h

26 29 32 34 37 40 43 45 48

8
 RADIAL TYRES

MAXI TRACTION
NEW
The Firestone MAXI TRACTION is designed for high horse power tractors.

Farmers/End-users benefits:

- A line-up of 8 sizes answering the requirements of newly developed high

horse power tractors
- Excellent traction and uniform tread wear due to optimized lug design and
extra wide tread arc
- Reduced soil compaction due to larger footprint and round shoulders
- High load capacity of the 5 most used sizes to withstand severe service
conditions with higher rated inflation pressure
- Allowed to be fitted on 50K tractors due to the same load capacity at 40 kph
and 50 kph

R8000
The Radial 8000 has been designed to be used mainly on the rear axle of high-powered tractors and
gives excellent all-round performance in normal and soft, wet conditions.
Powerful traction
Lug with 23° angle at shoulder
Comfortable, smooth ride
- 52° lug angle at centre
- lug overlap at centre
Improved road wear
Longer lugs
Improved cut and tear resistance
Optimised compound R7000 R8000
Less soil compaction
Optimised pressure distribution due to
- wide tread arc
- flat tread contour
Excellent self-cleaning
Optimised lug design proven in
independent trials (ENAMA ...)

9
 RADIAL TYRES

R6000
The Firestone Radial 6000 is designed for use on all types of tractors. It provides excellent manoeu-
vrability and traction in all soil conditions, in addition to good driver comfort and low road wear.
Available in standard and 70-series.
Excellent traction
23° lug angle at shoulder
Good soil penetration and drive precision
60° lug angle at centre
Resistance against lug tearing
Reinforced lug base
Even wear and comfortable ride
More rubber contact in centre area
Less soil compaction
Flat tread contour
Excellent self-cleaning
Special shape of lug design

R4000
The Firestone Radial 4000 has been designed for medium-to-low horsepower tractors, typically being
used for vineyard and orchard service. Its construction and compound allows it to perform in all kinds
of conditions - from hard terrain to soft soil, from flat to hilly conditions - making the Radial 4000 a
versatile all-rounder.
Long Tyre Life & high Durability
Due to higher number of Lugs and new Tread Compound, specifically developed for intensive road
usage.
Excellent Lateral Stability
Due to reinforced Sidewall and Bead Construction
Uniform Tread Wear
Optimised Lug Design & new Tread Compound Technology
Cut Resistant
Highly resistant Compound for hard Soil Conditions
Excellent straight Driving Stability & Steering Accuracy
Due to 60° Lug Angle at Center & reinforced Carcass Contruction
Higher Load Capacity
Due to higher rated Inflation Pressure, allows to withstand tractors front imple-
ment weight
Minimized Soil Compaction & Rutting
Due to Flat Tread Contour and Wide Tread Arc

10
 RADIAL TYRES

Radial All Traction Deep Tread (RATDT)

Designed to meet the needs of high-powered tractors which carry heavy loads and develop
significant torque levels.
Variable curved lug:
- Increases the contact area and therefore decreases soil compaction,
- Increases traction power capacity,
- Harmonises rolling and therefore minimises vibration.
Reinforced lug base:
- Provides excellent resistance to lug tearing.
Bead rim protector:
- Designed to prevent soil from being trapped between the rim flange and tyre
bead.

Radial All Traction

Four-Wheel Drive (RAT FWD)
Specifically designed for the front axle.
- Multi-angle tread design minimizes tread distortion for extended tread life
and provides excellent grip for cornering and traction.
- Open-center reinforced tread bars aid cleaning to increase traction under
maximum load.
- Vibration-resistant tread design provides a smooth pull in the field and a
smooth ride on the road.
- High-angle stabilizer belts for fuel economy, long wear and maximum grip.
- Bead Rim Protector designed to prevent soil from being trapped between the
rim flange and tyre bead.

11
 RADIAL TYRES

Radial Champion Spade Grip (RCSG)

Radial construction to enhance performance in wet field operations.
- 45° extra deep traction bars for extra traction in wet ground.
- Radial construction puts down longer footprint with less slippage than bias.
- Wide tread and large footprint minimize slippage on loose and firm soils.
- Durable radial construction with high angle stabilizer belt plies helps minimize
bar movement.

Radial All Traction 23° (RAT 23°)

Radial drive wheel tractor tyre for traction, durability and road wear.
- Flatter tread contour with proven 23° long bar/long bar tread design for excel-
lent traction, long even wear, and smooth ride.
- Increased number of lugs combined with open center design optimizes wear
and traction, while providing resistance to vibration.
- Radial body construction with high angle stabilizing belts for fuel economy, long
wear and positive traction.
- Dual rubber compounds provide long-wearing, tear resistant tread and resis-
tance to cracking and weathering in the sidewall.
- Bead Rim Protector.

Radial Deep Tread 23° (RDT 23°)

- Firestone’s proven 23° long bar/long bar tread design with deeper tread depth
provides even wear, long life.
- Open center design optimizes wear and traction, while providing resistance to
vibration.
- Deep tread depth that delivers excellent wear and traction in both wet and dry
conditions.
- Radial body construction with high angle stabilizing belts for fuel economy, long
wear, and positive traction.
- Bead Rim Protector.

12
 RADIAL TYRES

Radial Flotation 23° DT (RAD FLOT 23° DT)

Designed for use on sugar beet harvesters, manure wagons,...
- Minimum soil compaction due to lower unit ground pressure provided
by massive width and large ground contact area.
- Handles heavy loads with minimal damage to environment.
- Low air pressure capability providing soft ride to minimize damage to
equipment.

R9000
Modern design for Sprayer/Row crop application.
- Multi-angle tread design for excellent grip and extended tyre life.
- Vibration resistant lug configurations for smooth ride.
- Reinforced tread bars for traction and wear.
- Bead and rim flange protector designed to
prevent soil from being trapped between the rim flange and tyre bead.

R7000
(70 Series) (80 Series)
- Flexible sidewalls produce a large contact patch maximising flotation
and minimising soil compaction.
- 45° lug angle and spacing ensure effective self-cleaning and
excellent traction.
- Cut-resistant rubber compound.

13
 radial tyres
severe service

MAXI TRACTION
NEW
The Firestone MAXI TRACTION is designed for high horse power tractors.

Farmers/End-users benefits:

- A line-up of 8 sizes answering the requirements of newly developed high

horse power tractors
- Excellent traction and uniform tread wear due to optimized lug design and
extra wide tread arc
- Reduced soil compaction due to larger footprint and round shoulders
- High load capacity of the 5 most used sizes to withstand severe service
conditions with higher rated inflation pressure
- Allowed to be fitted on 50K tractors due to the same load capacity at 40 kph
and 50 kph

R8000 Severe Service (R8000 SS)

Constructed to withstand the most severe soil conditions in hard, dry and rocky terrain.
The tyre can be used on normal agricultural tractors as well as on light
construction equipment.
- A large footprint allows for better flotation and improved traction.
- A newly developed compound is highly resistant to cutting and tearing.
- Reduced bar height and harder compound for excellent performance on hard,
dry and rocky terrain.

14
 Load and inflation tables
65 SERIES
Max. Load per Tyre Pressure per Tyre
0.6 0.8 1.0 1.2 1.4 1.6 Speed
440/65 R24 128 A8 128 B TL - R9000 Evolution 1510 1695 1850 2030 2190 2340 10
1245 1395 1525 1675 1805 1930 30
441 1196 540 3575 W14L W13 1160 1305 1425 1560 1685 1800 40
W15L 1050 1230 1390 1540 1675 1800 50
480/65 R24 133 A8 133 B TL - R9000 Evolution 1725 1935 2115 2320 2505 2680 10
1420 1595 1740 1905 2060 2200 30
469 1250 564 3736 W15L W14L 1330 1490 1630 1785 1930 2060 40
1200 1410 1590 1760 1915 2060 50
540/65 R24 140 A8 140 B TL - R9000 Evolution 2095 2350 2570 2815 3040 3250 10
1730 1940 2120 2325 2510 2680 30
520 1315 594 3932 W16L W15L
1615 1810 1980 2165 2340 2500 40
W18L
1460 1710 1930 2135 2325 2500 50
440/65 R28 131 A8 131 B TL - R9000 Evolution 1635 1835 2005 2195 2375 2535 10
1350 1515 1655 1810 1955 2090 30
441 1292 581 3860 W14L W13 1260 1410 1545 1690 1825 1950 40
W15L 1140 1335 1510 1665 1815 1950 50
480/65 R28 136 A8 136 B TL - R9000 Evolution 1875 2105 2300 2520 2725 2910 10
1550 1735 1900 2080 2245 2400 30
469 1345 607 4043 W15L W14L 1445 1620 1775 1940 2095 2240 40
1310 1530 1730 1915 2085 2240 50
540/65 R28 142 A8 142 B TL - R9000 Evolution 2220 2490 2725 2985 3220 3445 10
1835 2055 2250 2460 2660 2840 30
520 1423 640 4234 W16L W15L
1710 1920 2095 2295 2480 2650 40
W18L
1545 1810 2050 2265 2465 2650 50
0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 Speed
600/65 R28 154 A8 154 B TL - Maxi Traction 2600 3090 3530 3940 4320 4615 4965 5230 5435 5625 10
1855 2205 2520 2810 3085 3295 3510 3700 3880 4015 30
597 1494 668 4435 W18l DW20A 1730 2060 2350 2625 2880 3075 3310 3490 3625 3750 40
2350 2625 2880 3075 3310 3490 3625 3750 50
0.6 0.8 1.0 1.2 1.4 1.6 Speed
540/65 R30 143 A8 143 B TL - R9000 Evolution 2285 2565 2805 3070 3320 3545 10
1885 2115 2310 2530 2735 2920 30
520 1485 668 4448 W16L W15L
1760 1970 2155 2360 2550 2725 40
W18L
1590 1865 2105 2330 2535 2725 50
540/65 R34 145 A8 145 B TL - R9000 Evolution 2430 2730 2985 3265 3530 3770 10
2005 2245 2455 2690 2905 3105 30
520 1585 711 4736 W16L W15L
1870 2100 2295 2515 2715 2900 40
W18L
1695 1985 2240 2480 2695 2900 50
600/65 R34 151 A8 151 B TL - R9000 Evolution 2890 3245 3550 3885 4195 4485 10
2385 2675 2925 3200 3460 3695 30
580 1648 743 4924 W18L DW20A 2225 2495 2730 2990 3230 3450 40
2015 2360 2665 2945 3210 3450 50
540/65 R38 147 A8 147 B TL - R9000 Evolution 2575 2890 3160 3460 3740 3995 10
2125 2380 2605 2850 3080 3290 30
520 1683 759 5029 W16L W15L
1985 2225 2435 2665 2880 3075 40
W18L
1795 2105 2375 2625 2860 3075 50
600/65 R38 153 A8 153 B TL - R9000 Evolution 3055 3430 3750 4110 4435 4745 10
2520 2830 3095 3390 3660 3910 30
580 1755 790 5238 W18L DW20A 2355 2640 2890 3165 3415 3650 40
2130 2495 2820 3120 3395 3650 50
650/65 R38 157 A8 157 B TL - R9000 Evolution 3455 3875 4240 4640 5015 5360 10
2850 3195 3495 3825 4130 4415 30
635 1833 823 5446 DW20A W18L 2660 2985 3265 3575 3860 4125 40
2405 2820 3185 3525 3835 4125 50
650/65 R42 158 A8 158 B TL - R9000 Evolution 3565 3995 4370 4785 5170 5525 10
2935 3290 3595 3940 4255 4550 30
642* 1933* 862 5745 DW20A W18L 2740 3075 3360 3685 3980 4250 40
3285 3630 3950 4250 50
Where W rims are shown, DW rims with equivalent flanges are permitted. * Estimated dimensions

! In order to obtain the optimised tyre performance, it is preferred to mount on the recommended rim.
15
 Load and
inflation tables
70 SERIES - 16”-24”

Max. Load per Tyre Pressure per Tyre

0.8 1.2 1.6 2.0 2.2 2.4 Speed
280/70 R16 112 A8 109 B TL - R4000 860 1030 1190 1360 1435 1515 10
680 815 940 1075 1140 1200 30
276 805 362 2418 W9 W10
640 765 880 1005 1065 1120 40
W8
580 695 800 915 970 1020 50
280/70 R18 114 A8 111 B TL - R4000 905 1085 1250 1430 1515 1595 10
715 860 990 1135 1200 1265 30
273 855 385 2592 W9 W10
670 805 925 1060 1120 1180 40
W8
610 730 845 965 1020 1075 50
280/70 R20 116 A8 113 B TL - R4000 960 1150 1325 1515 1605 1690 10
760 910 1050 1200 1270 1340 30
273 906 408 2722 W9 W10
710 850 980 1120 1190 1250 40
W8
645 775 895 1020 1080 1140 50
300/70 R20 120 A8 117 B TL - R4000 1035 1240 1430 1635 1730 1820 10
850 1020 1175 1345 1425 1500 30
290 939 423 2847 W9 W10 795 955 1100 1255 1330 1400 40
725 865 1000 1145 1210 1275 50
320/70 R20 123 A8 120 B TL - R4000 1185 1420 1640 1875 1990 2095 10
945 1130 1305 1490 1575 1660 30
315 985 446 2945 W10 W9
880 1055 1220 1390 1475 1550 40
W11
800 960 1110 1265 1340 1415 50
360/70 R20 129 A8 126 B TL - R4000 1420 1700 1960 2240 2370 2500 10
1125 1345 1555 1775 1880 1980 30
358 1056 475 3191 W11 W10
1050 1260 1455 1660 1760 1850 40
W12
955 1145 1320 1510 1600 1685 50

0.6 0.8 1.0 1.2 1.4 1.6 Speed

320/70 R24 116 A8 116 B TL - R6000 1175 1285 1405 1520 1625 10
865 970 1060 1160 1255 1340 30
319 1096 493 3312 W10 W9
810 905 990 1085 1170 1250 40
W11
945 1055 1155 1250 50
360/70 R24 122 A8 122 B TL - R6000 1410 1540 1690 1825 1950 10
1035 1165 1270 1390 1505 1605 30
360 1148 517 3469 W11 W10
970 1085 1190 1300 1405 1500 40
W12
1135 1265 1385 1500 50
380/70 R24 125 A8 125 B TL - R6000 1550 1695 1860 2005 2145 10
1145 1280 1400 1535 1660 1770 30
380 1190 536 3595 W12 W11
1065 1195 1305 1430 1545 1650 40
W13
1245 1390 1525 1650 50
Where W rims are shown, DW rims with equivalent flanges are permitted.

16
 Load and inflation tables
70 SERIES - 24”-34”

Max. Load per Tyre Pressure per Tyre

0.6 0.8 1.0 1.2 1.4 1.6 Speed
420/70 R24 130 A8 130 B TL - R6000 1785 1955 2140 2310 2470 10
1315 1475 1610 1765 1905 2035 30
418 1250 563 3777 W13 W12
1225 1375 1505 1645 1780 1900 40
W14L
1435 1600 1755 1900 50
480/70 R24 138 A8 138 B TL - R6000 2220 2425 2655 2870 3065 10
1630 1830 2000 2190 2365 2525 30
480 1323 595 3997 W15L W14L
1525 1710 1870 2045 2210 2360 40
W16L
1780 1990 2180 2360 50
360/70 R28 125 A8 125 B TL - R6000 1550 1695 1860 2005 2145 10
1140 1280 1400 1530 1655 1765 30
360 1248 562 3771 W11 W10
1065 1195 1305 1430 1545 1650 40
W12
1245 1390 1525 1650 50
420/70 R28 133 A8 133 B TL - R6000 1935 2115 2320 2505 2680 10
1425 1595 1745 1910 2065 2205 30
420 1350 608 4079 W13 W12
1330 1490 1630 1785 1930 2060 40
W14L
1555 1735 1905 2060 50
480/70 R28 140 A8 140 B TL - R6000 2350 2570 2815 3040 3250 10
1725 1935 2115 2320 2505 2675 30
483 1425 641 4306 W15L W14L
1615 1810 1980 2165 2340 2500 40
W16L
1890 2105 2310 2500 50
480/70 R30 141 A8 141 B* TL - R8000 2420 2645 2900 3130 3345 10
1775 1995 2180 2390 2580 2755 30
480 1480 666 4472 W15L W14L
1660 1865 2040 2230 2410 2575 40
W16L
1945 2170 2380 2575 50

480/70 R34 143 A8 143 B TL - R8000 2560 2800 3065 3310 3540 10
1880 2110 2305 2525 2730 2915 30
475 1575 709 4760 W15L W14L
1760 1970 2155 2360 2550 2725 40
W16L
2055 2295 2515 2725 50
Where W rims are shown, DW rims with equivalent flanges are permitted.
* Also available in High Speed version - See page 27

17
 Load and
inflation tables
70 SERIES - 34”-42”

Max. Load per Tyre Pressure per Tyre

0.6 0.8 1.0 1.2 1.4 1.6 Speed
480/70 R34 143 A8 140 B TL - R7000 2560 2800 3065 3310 3540 10
1880 2110 2305 2525 2730 2915 30
488 1568 706 4703 W15L W14L
1760 1970 2155 2360 2550 2725 40
W16L
1980 2165 2340 2500 50
520/70 R34 148 A8 148 B TL - R8000 2960 3235 3545 3830 4095 10
2175 2440 2665 2920 3155 3370 30
515 1645 741 4971 W16L W15L
2030 2280 2490 2730 2950 3150 40
W18L
2375 2650 2910 3150 50
520/70 R34 148 A8 145 B TL - R7000 2960 3235 3545 3830 4095 10
2175 2440 2665 2920 3155 3370 30
516 1625 731 4866 W16L W15L
2030 2280 2490 2730 2950 3150 40
W18L
2295 2515 2715 2900 50
480/70 R38 145 A8 145 B TL - R8000 2725 2980 3265 3525 3770 10
2005 2245 2455 2690 2905 3105 30
475 1675 754 5062 W15L W14L
1870 2100 2295 2515 2715 2900 40
W16L
2190 2445 2680 2900 50
480/70 R38 145 A8 142 B TL - R7000 2725 2980 3265 3525 3770 10
2005 2245 2455 2690 2905 3105 30
484 1681 757 5080 W15L W14L
1870 2100 2295 2515 2715 2900 40
W16L
2095 2295 2480 2650 50
520/70 R38 150 A8 150 B TL - R8000 3150 3440 3770 4070 4355 10
2310 2595 2835 3105 3355 3585 30
515 1750 788 5289 W16L W15L
2160 2425 2650 2905 3135 3350 40
W18L
2530 2820 3095 3350 50
520/70 R38 150 A8 147 B TL - R7000 3150 3440 3770 4070 4355 10
2310 2595 2835 3105 3355 3585 30
507 1755 790 5303 W16L W15L
2160 2425 2650 2905 3135 3350 40
W18L
2435 2665 2880 3075 50

580/70 R38 155 A8 155 B TL - R8000 3640 3980 4360 4710 5035 10
2670 3000 3280 3590 3880 4145 30
580 1830 824 5530 W18L W16L 2500 2805 3065 3360 3625 387 40
2925 3265 3580 3875 50

620/70 R42 160 A8 160 B TL - Maxi Traction 3645 4350 4875 5475 6190 6750 10
2605 3105 3480 3910 4415 4815 30
625 1935 873 5750 DW20A W18L 2430 2900 3250 3650 4125 4500 40
2430 2900 3250 3650 4125 4500 50
Where W rims are shown, DW rims with equivalent flanges are permitted.

Compared to conventional tyres the equivalent “70 series” tyre:

- Generally fits the same rim
! - Carries additional load at the same inflation pressure
- Provides 20% larger footprint for reduced soil compaction
- Has a similar overall diameter and rolling circumference.

18
 Load and inflation tables
85 SERIES - 16”-24”

Max. Load per Tyre Pressure per Tyre

1.6 2.0 2.4 2.6 2.8 3.0 3.2 Speed
7.50 R16 102 A8 99 B TL - R4000 795 910 1015 1065 1125 1180 1235 10
590 675 750 790 830 870 910 30
200 792 356 2421 5.50 F 6.00 F 550 630 705 735 775 815 850 40
500 575 640 670 705 740 775 50
7.50 R18 104 A8 101 B TL - R4000 845 965 1075 1130 1190 1250 1305 10
625 715 795 835 880 920 965 30
202 850 383 2588 5.50 F 6.00 F 585 665 745 780 820 860 900 40
530 605 675 710 750 785 820 50
0.6 0.8 1.0 1.2 1.4 1.6 Speed
250/85 R24 (9.5 R 24) 109 A8 106 B TL - R6000 970 1060 1160 1255 1340 10
650 750 835 930 1020 1105 30
240 1042 469 3149 W8 W7 630 730 815 895 965 1030 40
720 800 880 950 50
280/85 R24 (11.2 R 24) 115 A8 112 B TL - R6000 1145 1250 1370 1480 1580 10
760 880 985 1095 1200 1300 30
282 1095 493 3309 W10 W9 745 860 965 1055 1140 1215 40
845 945 1035 1120 50
11.2 R24 114 A8 111 B TL - R7000 1110 1215 1330 1435 1535 10
820 915 1000 1095 1185 1265 30
277 1080 486 3264 W10 W9 760 855 935 1025 1105 1180 40
865 945 1020 1090 50
320/85 R24 (12.4 R 24) 122 A8 119 B TL - R6000 1410 1545 1690 1825 1950 10
940 1085 1210 1350 1485 1605 30
313 1150 518 3475 W11 W9
920 1065 1190 1300 1405 1500 40
W10
1025 1145 1255 1360 50
12.4 R24 119 A8 116 B TL - R7000 1280 1400 1530 1655 1770 10
940 1055 1150 1260 1365 1455 30
314 1127 507 3406 W11 W9
880 985 1075 1180 1275 1360 40
W10
990 1085 1170 1250 50
340/85 R24 (13.6 R 24) 125 A8 122 B TL - R6000 1550 1695 1860 2010 2145 10
1035 1195 1340 1490 1635 1770 30
343 1200 540 3626 W12 W11 1010 1170 1305 1430 1545 1650 40
1135 1265 1385 1500 50
13.6 R24 121 A8 118 B TL - R7000 1365 1490 1630 1765 1885 10
1000 1120 1225 1345 1450 1550 30
341 1179 531 3562 W12 W11 935 1050 1150 1255 1360 1450 40
1045 1145 1235 1320 50
Where W rims are shown, DW rims with equivalent flanges are permitted.

19
 Load and
inflation tables
85 SERIES - 24”-28”

Max. Load per Tyre Pressure per Tyre

0.6 0.8 1.0 1.2 1.4 1.6 2.1 Speed
380/85 R24 (14.9 R24) 131 A8 128 B TL - R6000 1835 2005 2195 2375 2535 10
1225 1415 1580 1760 1930 2090 30
378 1245 560 3761 W13 W11
1195 1380 1545 1690 1825 1950 40
W12
1360 1515 1665 1800 50
14.9 R24 126 A8 123 B TL - R7000 1600 1745 1915 2065 2210 10
1175 1320 1440 1580 1705 1820 30
375 1246 561 3765 W13 W11
1095 1230 1345 1475 1590 1700 40
W12
1225 1345 1450 1550 50

420/85 R24 (16.9 R24) 137 A8 134 B TL - R6000 2165 2365 2590 2800 2990 10
1440 1660 1860 2070 2275 2460 30
430 1320 594 3988 W15L W14L 1410 1630 1820 1995 2155 2300 40
1600 1785 1960 2120 50

16.9 R24 134 A8 131 B TL - R7000 1990 2180 2385 2575 2755 10
1465 1645 1795 1970 2125 2270 30
425 1307 588 3948 W15L W14L 1370 1535 1680 1840 1985 2120 40
1545 1690 1825 1950 50

14.9 R26 132 A8 132 B TL - RATFWD 1545 1725 1875 2175 2325 2625 3000 10
1105 1235 1340 1555 1660 1875 2140 30
389 1316 597 3920 W13 W11
1030 1150 1250 1450 1550 1750 2000 40
W12
1030 1150 1250 1450 1550 1750 2000 50

420/85 R26 (16.9 R26) 138 A8 138 B TL - RATFWD 1930 2250 2550 2925 3180 3540 10
1375 1605 1820 2090 2270 2530 30
439 1384 625 4089 W15L W14L 1285 1500 1700 1950 2120 2360 40
1285 1500 1700 1950 2120 2360 50

18.4 R26 140 A8 140 B TL - RATFWD 2250 2550 2775 3180 3360 3750 10
1605 1820 1980 2270 2400 2675 30
478 1450 650 4270 W16L W15L 1500 1700 1850 2120 2240 2500 40
1500 1700 1850 2120 2240 2500 50

250/85 R28 (9.5 R28) 112 A8 109 B TL - R6000 1060 1155 1265 1370 1460 10
705 810 905 1010 1110 1200 30
240 1143 515 3454 W8 W7 690 795 885 970 1050 1120 40
780 870 955 1030 50

280/85 R28 (11.2 R28) 118 A8 115 B TL - R6000 1245 1360 1490 1605 1720 10
830 955 1070 1195 1310 1415 30
282 1200 540 3627 W10 W9 810 935 1045 1145 1235 1320 40
920 1025 1125 1215 50
Where W rims are shown, DW rims with equivalent flanges are permitted.

20
 Load and inflation tables
85 SERIES - 28”

Max. Load per Tyre Pressure per Tyre

0.6 0.8 1.0 1.2 1.4 1.6 Speed
11.2 R28 116 A8 113 B TL - R7000 1175 1285 1405 1520 1625 10
865 970 1060 1160 1255 1340 30
277 1187 534 3587 W10 W9 810 905 990 1085 1170 1250 40
910 1000 1080 1150 50
320/85 R28 (12.4 R28) 124 A8 121 B TL - R6000 1505 1645 1805 1950 2080 10
1005 1160 1295 1445 1585 1715 30
315 1250 563 3777 W11 W9
980 1135 1265 1390 1500 1600 40
W10
1095 1220 1340 1450 50
12.4 R28 121 A8 118 B TL - R7000 1365 1490 1630 1765 1885 10
1000 1120 1225 1345 1450 1550 30
313 1238 557 3741 W11 W9
935 1050 1150 1255 1360 1450 40
W10
1045 1145 1235 1320 50
340/85 R28 (13.6 R28) 127 A8 124 B TL - R6000 1645 1800 1970 2130 2275 10
1100 1265 1415 1580 1735 1875 30
354 1301 586 3931 W12 W11 1075 1240 1385 1520 1640 1750 40
1210 1350 1480 1600 50
13.6 R28 123 A8 120 B TL - R7000 1455 1595 1745 1885 2015 10
1070 1205 1315 1440 1555 1660 30
331 1294 582 3910 W12 W11 1000 1120 1225 1345 1450 1550 40
1110 1215 1310 1400 50
380/85 R28 (14.9 R28) 133 A8 130 B TL - R6000 1940 2120 2325 2510 2680 10
1290 1490 1665 1855 2035 2205 30
383 1345 605 4064 W13 W11
1460 1630 1785 1930 2060 40
W12
1435 1600 1755 1900 50
14.9 R28 128 A8 125 B TL - R7000 1695 1850 2025 2190 2340 10
1245 1395 1525 1670 1805 1925 30
371 1344 605 4061 W13 W11
1160 1305 1425 1560 1685 1800 40
W12
1305 1430 1545 1650 50
420/85 R28 (16.9 R28) 139 A8 136 B TL - R6000 2290 2500 2740 2960 3160 10
1520 1755 1965 2190 2400 2600 30
430 1420 639 4290 W15L W14L 1490 1720 1925 2105 2275 2430 40
1690 1885 2070 2240 50
16.9 R28 136 A8 133 B TL - R7000 2105 2300 2520 2725 2910 10
1545 1735 1895 2075 2240 2395 30
429 1423 640 4237 W15L W14L 1445 1620 1775 1940 2095 2240 40
1630 1785 1930 2060 50
Where W rims are shown, DW rims with equivalent flanges are permitted.

21
 Load and
inflation tables
85 SERIES - 28”-34”

Max. Load per Tyre Pressure per Tyre

0.6 0.8 1.0 1.2 1.4 1.6 2.1 Speed
16.9 R28 136 A8 TL - RCSG 1980 2175 2400 2775 2925 3360 10
1415 1555 1715 1980 2090 2400 30
434 1478 663 4374 W15L W14L 1320 1450 1600 1850 1950 2240 40
50
18.4 R28 141 A8 TL - RCSG 2325 2625 2850 3270 3540 3865 10
1660 1875 2035 2335 2530 2760 30
467 1549 691 4568 W16L W15L 1550 1750 1900 2180 2360 2575 40
50
380/85 R30 (14.9 R30) 135 A8 135 B TL - RATFWD 1770 2040 2325 2625 2925 3270 10
1265 1460 1660 1875 2090 2335 30
389 1417 648 4242 W13 W11
1180 1360 1550 1750 1950 2180 40
W12
1180 1360 1550 1750 1950 2180 50

420/85 R30 (16.9 R30) 140 A8 137 B TL - R8000 2095 2350 2570 2815 3040 3250 10
1730 1940 2120 2325 2510 2680 30
435 1469 661 4439 W15L W14L 1530 1770 1980 2165 2340 2500 40
1780 1965 2140 2300 50

16.9 R30 137 A8 134 B TL - R7000 2160 2365 2590 2795 2990 10
1585 1780 1945 2130 2305 2460 30
425 1468 661 4436 W15L W14L 1485 1665 1820 1995 2155 2300 40
1680 1840 1985 2120 50

16.9 R30 141 A8 TL - RCSG 2040 2250 2475 2850 3000 3450 3865 10
1460 1605 1770 2035 2140 2465 2760 30
437 1529 693 4547 W15L W14L 1360 1500 1650 1900 2000 2300 2575 40
50

460/85 R30 (18.4 R30) 145 A8 142 B TL - R7000 2430 2730 2985 3265 3530 3770 10
2005 2250 2460 2695 2910 3110 30
477 1506 678 4550 W16L W15L 1870 2100 2295 2515 2715 2900 40
1710 1920 2095 2295 2480 2650 50

380/85 R34 (14.9 R34) 137 A8 137 B TL - RATFWD 1875 2175 2475 2775 3090 3450 10
1340 1555 1770 1980 2205 2465 30
389 1519 693 4547 W13 W11
1250 1450 1650 1850 2060 2300 40
W12
1250 1450 1650 1850 2060 2300 50

420/85 R34 (16.9 R34) 142 A8 139 B TL - R8000 2225 2495 2730 2990 3230 3450 10
1835 2055 2250 2460 2660 2840 30
429 1570 707 4744 W15L W14L 1625 1875 2095 2295 2480 2650 40
1880 2075 2260 2430 50
Where W rims are shown, DW rims with equivalent flanges are permitted.

22
 Load and inflation tables
85 SERIES - 34”-38”

Max. Load per Tyre Pressure per Tyre

0.6 0.8 1.0 1.2 1.4 1.6 Speed
16.9 R34 139 A8 136 B TL - R7000 2285 2495 2735 2955 3160 10
1680 1880 2060 2255 2435 2600 30
430 1562 703 4720 W15L W14L 1570 1760 1925 2105 2275 2430 40
1775 1940 2095 2240 50

460/85 R34 (18.4 R34) 147 A8 144 B TL - R8000 2580 2895 3165 3465 3745 4000 10
2130 2390 2610 2860 3090 3300 30
465 1642 739 4962 W16L W15L 1885 2175 2435 2665 2880 3075 40
2165 2390 2605 2800 50

18.4 R34 144 A8 141 B TL - R7000 2630 2880 3150 3405 3640 10
1935 2170 2370 2595 2805 2995 30
471 1628 733 4919 W16L W15L 1805 2025 2215 2425 2620 2800 40
2040 2230 2410 2575 50

13.6 R36 127 A8 124 B TL - R7000 1645 1800 1970 2130 2275 10
1210 1360 1485 1625 1755 1875 30
345 1488 670 4500 W12 W11 1130 1270 1385 1520 1640 1750 40
1265 1390 1500 1600 50

13.6 R38 128 A8 125 B TL - R7000 1695 1850 2025 2190 2340 10
1245 1395 1525 1670 1805 1925 30
335 1533 690 4631 W12 W11 1160 1305 1425 1560 1685 1800 40
1305 1430 1545 1650 50

420/85 R38 (16.9 R38) 144 A8 141 B TL - R8000 2345 2635 2880 3155 3405 3640 10
1935 2170 2375 2600 2810 3000 30
429 1670 752 5047 W15L W14L 1715 1980 2215 2425 2620 2800 40
1990 2200 2395 2575 50

16.9 R38 141 A8 138 B TL - R7000 2420 2645 2900 3130 3345 10
1775 1995 2180 2385 2570 2755 30
425 1670 752 5047 W15L W14L 1660 1865 2040 2230 2405 2575 40
1855 2030 2195 2360 50

460/85 R38 (18.4 R38) 149 A8 146 B TL - R8000 / RATDT 2730 3060 3345 3665 3960 4230 10
2245 2520 2755 3015 3255 3480 30
465 1743 785 5267 W16L W15L
1990 2300 2570 2815 3040 3250 40
478 1742 803 5250
2320 2565 2790 3000 50

18.4 R38 146 A8 143 B TL - R7000 2820 3085 3375 3645 3900 10
2070 2325 2540 2780 3005 3210 30
476 1728 778 5222 W16L W15L 1935 2170 2375 2600 2810 3000 40
2155 2360 2550 2725 50
Where W rims are shown, DW rims with equivalent flanges are permitted.
Italic figures are for RATDT tyre.

23
 Load and
inflation tables
85 SERIES - 38”-46”

Max. Load per Tyre Pressure per Tyre

0.6 0.8 1.0 1.2 1.4 1.6 Speed
18.4 R38 146 A8 TL - RCSG 2700 3000 3270 3865 4090 4500 10
1930 2140 2335 2760 2920 3210 30
467 1775 803 5283 W16L W15L 1800 2000 2180 2575 2725 3000 40
50
520/85 R38 (20.8 R38) 155 A8 152 B TL - R8000 / RATDT 3250 3645 3985 4365 4715 5040 10
2675 3005 3285 3595 3885 4150 30
525 1830 824 5530 W18L W16L
2375 2745 3065 3360 3625 3875 40
528 1835 831 5472
2745 3035 3300 3550 50
20.8 R38 153 A8 153 B TL - R7000 3270 3645 3975 4615 4875 5475 10
2335 2605 2840 3295 3480 3910 30
528 1839 818 5461 W18L W16L 2180 2430 2650 3075 3250 3650 40
2180 2430 2650 3075 3250 3650 50
20.8 R38 153 A8 TL - RCSG 3270 3645 3975 4615 4875 5475 10
2335 2605 2840 3295 3480 3910 30
533 1859 831 5486 W18L W16L 2180 2430 2650 3075 3250 3650 40
50
18.4 R42 148 A8 148 B TL - R7000 2850 3180 3450 4090 4350 4725 10
2035 2270 2465 2920 3105 3375 30
480 1857 846 5537 W16L W15L 1900 2120 2300 2725 2900 3150 40
1900 2120 2300 2725 2900 3150 50
18.4 R42 148 A8 TL - RCSG 2850 3180 3450 4090 4350 4725 10
2035 2270 2465 2920 3105 3375 30
470 1900 866 5639 W16L W15L 1900 2120 2300 2725 2900 3150 40
50
480/80 R42 (18.4 R 42) 151 A8 151 B TL - RAT 23° 2775 3270 3750 4200 4725 5175 10
1980 2335 2675 3000 3375 3695 30
478 1854 833 5537 W16L W15L 1850 2180 2500 2800 3150 3450 40
1850 2180 2500 2800 3150 3450 50
20.8 R42 155 A8 155 B TL - R7000 3450 3865 4200 4875 5175 5815 10
2465 2760 3000 3480 3695 4150 30
528 1941 869 5766 W18L W16L 2300 2575 2800 3250 3450 3875 40
2300 2575 2800 3250 3450 3875 50
20.8 R42 155 A8 TL - RCSG 3450 3865 4200 4875 5175 5815 10
2465 2760 3000 3480 3695 4150 30
528 1989 894 5885 W18L W16L 2300 2575 2800 3250 3450 3875 40
50
520/85 R46 158 A8 158 B TL - RATDT 3450 4090 4615 5175 5815 6375 10
2465 2920 3295 3695 4150 4550 30
530 2050 930 6100 DW16L DW18L 2300 2725 3075 3450 3875 4250 40
2300 2725 3075 3450 3875 4250 50
Where W rims are shown, DW rims with equivalent flanges are permitted.
Italic figures are for RATDT tyre.

24
 Load and inflation tables
HIGH SPEED APPLICATION (65/70 KM/H)

Max. Load per Tyre Pressure per Tyre

0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 Speed
480/70 R30 147 D TL - R8000 2190 2420 2645 2900 3130 3345 3663 3980 4295 4610 10
1775 1995 2180 2390 2580 2755 2955 3155 3355 3550 30
1660 1865 2040 2230 2410 2575 2775 2975 3175 3370 40
480 1480 666 4472 W15L W14L 1540 1725 1945 2170 2380 2575 2640 2805 3015 3230 50
W16L 2050 2255 2460 2665 2870 3075 65
1870 2055 2240 2425 2615 2800 70

540/65 R30 150 D TL - R9000 Evolution 2285 2565 2805 3070 3320 3620 3995 4345 4690 5030 10
1885 2115 2310 2530 2735 2920 3145 3385 3620 3850 30
1760 1970 2155 2360 2550 2725 2940 3195 3450 3670 40
520 1485 668 4448 W16L W15L 1590 1865 2105 2330 2535 2725 2905 3095 3310 3520 50
W18L 2175 2420 2660 2895 3120 3350 65
1980 2205 2425 2635 2840 3050 70

540/65 R34 152 D 149 E TL - R9000 Evolution 2380 2670 2920 3200 3480 3770 4180 4580 4970 5325 10
2005 2245 2455 2690 2905 3105 3340 3595 3845 4085 30
1870 2100 2295 2515 2715 2900 3150 3390 3660 3890 40
518 1565 702 4676 W16L W15L 1695 1985 2240 2480 2695 2900 3085 3285 3510 3730 50
W18L 2340 2600 2820 3070 3315 3550 65
2110 2345 2570 2795 3015 3250 70

650/65 R38 163 D 163 E TL - R9000 Evolution 3385 3795 4150 4545 4950 5360 5810 6320 6825 7315 10
2850 3195 3495 3825 4130 4415 4620 4935 5275 5610 30
2660 2985 3265 3575 3860 4125 4350 4655 5025 5340 40
638 1818 818 5413 DW20A W18L 2410 2820 3190 3525 3835 4125 4230 4480 4820 5120 50
3215 3550 3875 4215 4550 4875 65
2925 3225 3570 3925 4355 4875 70

25
 Load and
inflation tables
SEVERE SERVICE

Max. Load per Tyre Pressure per Tyre

0.8 1.2 1.6 2.0 2.2 2.4 Speed
460/85 R34 (18.4 R34) 147 A8 144 B TL - R8000SS 2580 2895 3165 3465 3745 4000 10
2130 2390 2610 2860 3090 3300 30
467 1635 736 4941 W16L W15L 1885 2175 2435 2665 2880 3075 40
2165 2390 2605 2800 50
460/85 R38 (18.4 R38) 149 A8 146 B TL - R8000SS 2730 3060 3345 3665 3960 4230 10
2245 2520 2755 3015 3255 3480 30
467 1750 793 5279 W16L W15L 1990 2300 2570 2815 3040 3250 40
2320 2565 2790 3000 50
520/85 R38 (20.8 R38) 155 A8 152 B TL - R8000SS 3250 3645 3985 4365 4715 5040 10
2675 3005 3285 3595 3885 4150 30
528 1810 821 5470 W18L W16L 2375 2745 3065 3360 3625 3875 40
2745 3035 3300 3550 50

Max. Load per Tyre Pressure per Tyre

0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 Speed
600/65 R28 154A8 154B TL Maxi Traction 2600 3090 3530 3940 4320 4615 4965 5230 5435 5625 10
1855 2205 2520 2810 3085 3295 3510 3700 3880 4015 30
597 1494 668 4435 W18L DW20A 1730 2060 2350 2625 2880 3075 3310 3490 3625 3750 40
2350 2625 2880 3075 3310 3490 3625 3750 50
600/70 R30 158A8 158B TL Maxi Traction 3000 3560 4070 4545 4985 5325 5625 5930 6160 6375 10
2140 2545 2905 3245 3555 3800 4015 4230 4395 4550 30
591* 1591* 710 4735 DW20A DW18L
2000 2375 2715 3030 3325 3550 3750 3955 4105 4250 40
W18L
2715 3030 3325 3550 3750 3955 4105 4250 50
650/85 R38 173A8 173B TL Maxi Traction 4635 5350 5985 6555 7080 7570 8030 8460 8790 9100 10
3545 4090 4575 5010 5410 5785 6135 6470 6720 6955 30
676* 2052* 915 6085 DW23A - 3310 3825 4275 4685 5060 5405 5735 6045 6280 6500 40
4275 4685 5060 5405 5735 6045 6280 6500 50
710/70 R38 171A8 171B TL Maxi Traction 4320 4985 5830 6620 7375 7990 8375 8735 8990 9225 10
3080 3555 4155 4725 5260 5700 5975 6230 6415 6585 30
716* 1944* 866 5785 DW23A - 2880 3325 3885 4415 4920 5300 5585 5825 5995 6150 40
3885 4415 4920 5300 5585 5825 5995 6150 50
710/70 R42 173A8 173B TL Maxi Traction 4375 5200 6080 6905 7690 8445 8850 9235 9500 9750 10
3120 3710 4335 4925 5485 6025 6315 6585 6780 6955 30
716* 2052* 918 6084 DW23A - 2920 3465 4055 4605 5130 5600 5900 6155 6335 6500 40
4055 4605 5130 5600 5900 6155 6335 6500 50
Where W rims are shown, DW rims with equivalent flanges are permitted.
* Estimated dimensions

26
 Load and inflation tables
HIGH VOLUME APPLICATION

Max. Load per Tyre Pressure per Tyre

0.7 1.0 1.4 1.7 2.1 2.4 2.8 Speed
1050/50 R25 (66X43.00 R25) 172 A8 172B TL - RAD FLOT 23° DT 4200 5325 6375 7125 7950 8700 9450 10
3000 3800 4550 5085 5675 6210 6745 30
1049 1709 767 5131 36.0TH - 2800 3550 4250 4750 5300 5800 6300 40
2800 3550 4250 4750 5300 5800 6300 50
0.6 0.8 1.0 1.2 1.4 1.6 2.4 Speed
620/75 R30 (23.1 R30) 163 A8 TL - R7000 3150 3635 4065 4455 4810 5210 6650 10
2470 2850 3190 3490 3770 4085 5215 30
607 1676 754 4978 DW20A W18L 2305 2665 2980 3265 3525 3820 4875 40
2145 2480 2770 3035 3280 3550 4530 50
800/70 R38 173 A8 173 B TL - RDT 23° 5175 6190 6940 7950 8700 9750 10
3695 4415 4950 5675 6210 6955 30
795 2080 914 6180 MW25A - 3450 4125 4625 5300 5800 6500 40
3450 4125 4625 5300 5800 6500 50
900/ 50 R42 168 A8 168 B TL - R9000 4615 5325 6190 6940 7725 8400 10
3295 3800 4415 4950 5515 5995 30
874 1956 871 5790 DW28A MW28A 3075 3550 4125 4625 5150 5600 40
3075 3550 4125 4625 5150 5600 50

Max. Load per Tyre Pressure per Tyre

0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 Speed
600/65 R28 154 A8 154 B TL - Maxi Traction 2600 3090 3530 3940 4320 4615 4965 5230 5435 5625 10
1855 2205 2520 2810 3085 3295 3510 3700 3880 4015 30
597 1494 668 4435 W18l DW20A 1730 2060 2350 2625 2880 3075 3310 3490 3625 3750 40
2350 2625 2880 3075 3310 3490 3625 3750 50
600/70R30 158A8 158B TL - Maxi Traction 3000 3560 4070 4545 4985 5325 5625 5930 6160 6375 10
2140 2545 2905 3245 3555 3800 4015 4230 4395 4550 30
591* 1591* 710 4735 DW20A DW18L
2000 2375 2715 3030 3325 3550 3750 3955 4105 4250 40
W18L
2715 3030 3325 3550 3750 3955 4105 4250 50
650/85 R38 173A8 173B TL - Maxi Traction 4635 5350 5985 6555 7080 7570 8030 8460 8790 9100 10
3545 4090 4575 5010 5410 5785 6135 6470 6720 6955 30
676* 2052* 915 6085 DW23A - 3310 3825 4275 4685 5060 5405 5735 6045 6280 6500 40
4275 4685 5060 5405 5735 6045 6280 6500 50
710/70 R38 171A8 171BTL - Maxi Traction 4320 4985 5830 6620 7375 7990 8375 8735 8990 9225 10
3080 3555 4155 4725 5260 5700 5975 6230 6415 6585 30
716* 1944* 866 5785 DW23A - 2880 3325 3885 4415 4920 5300 5585 5825 5995 6150 40
3885 4415 4920 5300 5585 5825 5995 6150 50
710/70 R42 173A8 173B TL - Maxi Traction 4375 5200 6080 6905 7690 8445 8850 9235 9500 9750 10
3120 3710 4335 4925 5485 6025 6315 6585 6780 6955 30
716* 2052* 918 6084 DW23A - 2920 3465 4055 4605 5130 5600 5900 6155 6335 6500 40
4055 4605 5130 5600 5900 6155 6335 6500 50

27
 Load and
inflation tables
COMBINE HARVESTER
APPLICATION
Max. Load per Tyre Pressure per Tyre
0.8 1.0 1.2 1.4 1.6 1.8 Speed
620/75 R30 (23.1 R30) 163 A8 TL - R7000 3975 4445 4870 5260 5700 6115 10*
3635 4065 4455 4810 5210 5595 10
2850 3190 3490 3770 4085 4385 30
2665 2980 3265 3525 3820 4100 40
2480 2770 3035 3280 3550 3810 50
2.0 2.2 2.4 2.6 2.8 3.0 Speed
607 1676 754 4978 DW20A W18L
6515 6900 7270 7860 8290 10*
5960 6310 6650 10
4675 4950 5215 30
4365 4625 4875 40
4060 4300 4530 50
0.6 0.8 1.0 1.2 1.4 1.6 2.4 3.2 Speed
480/70 R30 152 A8 152 B TL - RATDT 2100 2475 2850 3180 3540 3865 4615 5325 10
1500 1770 2035 2270 2530 2760 3295 3800 30
483 1516 683 4500 W15L W14L
1400 1650 1900 2120 2360 2575 3075 3550 40
W16L
1400 1650 1900 2120 2360 2575 3075 3550 50
650/75 R32 172 A8 172 B TL - RATDT 0.8 1.0 1.2 1.4 1.6 1.8 Speed
4250 4930 5695 6375 7015 10*
4350 5025 5625 6190 6750 7315 10
3105 3585 4015 4415 4815 5220 30
2900 3350 3750 4125 4500 4875 40
2900 3350 3750 4125 4500 4875 50
650 1791 800 5340 DW21A DW20A 2.0 2.4 2.6 2.8 3.0 3.2 Speed
7650 8500 8755 9265 9520 9860 10*
7500 8175 8400 8700 9225 9450 10
5350 5835 5995 6210 6585 6745 30
5000 5450 5600 5800 6150 6300 40
5000 5450 5600 5800 6150 6300 50
800/65 R32 172 A8 172 B TL - RATDT 0.8 1.0 1.2 1.4 1.6 1.8 Speed
5100 5865 6800 7440 8290 10*
5175 6000 6565 7315 8175 8400 10
3695 4280 4685 5220 5835 5995 30
3450 4000 4375 4875 5450 5600 40
3450 4000 4375 4875 5450 5600 50
815 1862 830 5486 DW27A DW25A
DH27 2.0 2.2 2.4 2.6 2.8 3.0 Speed
9265 9520 9860 10455 10710 10*
8700 9225 9450 10
6210 6585 6745 30
5800 6150 6300 40
5800 6150 6300 50
710/75 R34 168 A8 168 B TL - RATDT 0.8 1.0 1.2 1.4 1.6 1.8 Speed
4930 5865 6590 7440 8290 10*
5175 5815 6565 7315 8400 10
721 1994 884 5842 DW23A MW23A 3695 4150 4685 5220 5995 30
3450 3875 4375 4875 5600 40
3450 3875 4375 4875 5600 50
* Cyclic Application (see note)
Note: For variable loading operations (Cyclic Application), where load on machine increa- Maximum % change in loads Changes in
ses and decreases, the loads may be changed as follows : Speed (km/h) from 40 km/h load Infl. Pressure
(1) Vehicle must be unloaded before transport outside of field.
10 + 70% + 0.4 bar
(2) This load increase is also applicable to tyres used on vehicles with a mechanism capable
of maintaining tyres and wheels in a vertical position on slopes up to 11° (20% grade).
For hill-side operations over 11° (20% grade) slope, only the basic load in the tables is
28 permitted.
 Load and inflation tables
ROW CROP APPLICATION

Max. Load per Tyre Pressure per Tyre

1.2 1.6 2.0 2.4 2.8 3.2 3.6 Speed
320/85 R34 133 A8 133 B TL (16.9 R28)* - R9000 2175 2625 2925 3090 10
1555 1875 2090 2205 30
315 1408 653 4240 W10 - 1450 1750 1950 2060 40
1450 1750 1950 2060 50
385/85 R34 146 A8 146 B TL (18.4 R30)* - RATFWD 2850 3540 3865 4090 4500 10
2035 2530 2760 2920 3210 30
391 1519 693 4547 W13 W12 1900 2360 2575 2725 3000 40
1900 2360 2575 2725 3000 50
320/85 R38 143 A8 143 B TL (18.4 R 30)* - R9000 2325 2775 3090 3270 3540 3865 4090 10
1660 1980 2205 2335 2530 2760 2920 30
318 1516 700 4570 W10 DW10A
1550 1850 2060 2180 2360 2575 2725 40
W11
1550 1850 2060 2180 2360 2575 2725 50
380/80 R38 142 A8 142 B TL (16.9 R34 - 14.9 R38)* - RATDT 2850 3450 3750 3975 10
2035 2465 2675 2840 30
389 1595 732 4750 W12 - 1900 2300 2500 2650 40
1900 2300 2500 2650 50
320/90 R42 139 A8 139 B TL (18.4 R34 - 16.9 R38)* - R9000 2550 3090 3360 3645 10
1820 2205 2400 2605 30
315 1656 765 4985 W10 W9 1700 2060 2240 2430 40
1700 2060 2240 2430 50
12.4 R46 133 A8 TL (18.4 R 38)* - RCSG 2100 2475 2775 3090 10
1500 1770 1980 2205 30
315 1755 830 5283 W12 W10
1400 1650 1850 2060 40
W11
50
320/90 R46 148 A 148 B TL (18.4 R38)* - R9000 2625 3270 3540 3750 4200 4500 4725 10
1875 2335 2530 2675 3000 3210 3375 30
315 1755 818 5285 W10 DW10A 1750 2180 2360 2500 2800 3000 3150 40
1750 2180 2360 2500 2800 3000 3150 50
14.9 R46 142 A8 142 B TL (20.8 R38)* - RAT 23° 2925 3450 3975 10
2090 2465 2840 30
381 1824 841 5588 W13 W12 1950 2300 2650 40
1950 2300 2650 50
14.9 R46 145 A8 145 B TL (20.8 R38)* - RAT 23° 2925 3450 3975 4350 10
2090 2465 2840 3105 30
381 1824 841 5588 W13 W12 1950 2300 2650 2900 40
1950 2300 2650 2900 50
14.9 R46 149 A8 149 B TL (20.8 R38)* - RAT 23° 2925 3450 3975 4350 4875 10
2090 2465 2840 3105 3480 30
381 1824 841 5588 W13 W12 1950 2300 2650 2900 3250 40
1950 2300 2650 2900 3250 50
* Equivalent standard size - Where W rims are shown, DW rims with equivalent flanges are permitted.

29
 Load and
inflation tables
ROW CROP APPLICATION

Max. Load per Tyre Pressure per Tyre

1.2 1.6 2.0 2.4 2.8 3.2 3.6 Speed
380/90 R46 152 A8 152 B TL (20.8 R38)* - R9000 3450 4200 4615 4875 5325 10
2465 3000 3295 3480 3800 30
384 1849 856 5560 W12A W13A 2300 2800 3075 3250 3550 40
2300 2800 3075 3250 3550 50
420/80 R46 151 A8 151 B TL (20.8 R38)* - RAT 23° 3645 4350 4875 5175 10
2605 3105 3480 3695 30
419 1860 856 5590 W13A W12A 2430 2900 3250 3450 40
2430 2900 3250 3450 50
230/95 R48 134 A8 134 B TL (16.9 R38)* - R9000 1770 2175 2325 2550 2775 3000 3180 10
1265 1555 1660 1820 1980 2140 2270 30
230 1656 782 5005 W8 W7 1180 1450 1550 1700 1850 2000 2120 40
1180 1450 1550 1700 1850 2000 2120 50
320/90 R50 148 A8 148 B TL (20.8 R38)* - R9000 2775 3360 3750 3975 4350 4725 10
1980 2400 2675 2840 3105 3375 30
315 1857 869 5590 W10 W10A 1850 2240 2500 2650 2900 3150 40
1850 2240 2500 2650 2900 3150 50
380/90 R50 151 A8 151 B TL (20.8 R42 - 710/70 R38)* - R9000 3540 4350 4725 5175 10
2530 3105 3375 3695 30
378 1950 904 5865 DW12A - 2360 2900 3150 3450 40
2360 2900 3150 3450 50
320/90 R54 143 A8 143 B TL (20.8 R42)* - RATDT 2925 3540 3865 4090 10
2090 2530 2760 2920 30
315 1948 910 5920 W10A - 1950 2360 2575 2725 40
1950 2360 2575 2725 50
320/90 R54 149 A8 149 B TL (20.8 R42 - 710/70 R38)* - RATDT 2925 3540 3865 4090 4500 4875 10
2090 2530 2760 2920 3210 3480 30
315 1948 910 5920 W10A - 1950 2360 2575 2725 3000 3250 40
1950 2360 2575 2725 3000 3250 50
380/90 R54 152 A8 152 B TL (710/70 R42 - 520/85 R46)* - R9000 3750 4500 5025 5325 10
2675 3210 3585 3800 30
381 2052 958 6170 W12A - 2500 3000 3350 3550 40
2500 3000 3350 3550 50
* Equivalent standard size - Where W rims are shown, DW rims with equivalent flanges are permitted.

30
AGRICULTURAL
TYRES
Bias Drive Tyres
 bias tyres

All Traction Champion (ATC)

The traditional:
- Variable width, reinforced lugs for excellent traction on all surfaces.
- 45° lug design for good lateral stability, especially important on hillsides.
- Nylon carcass for greater shock and impact resistance.

All Traction Field & Road (AT F&R)

A power axle tractor tyre that gives good performance in the field or on the road,
with excellent traction characteristics.
- 23° lug design to give increased drawbar pull for maximum traction
in the field.
- Nylon cord body for durability and long life.

Rancher
T131-133 T114
These tyres are especially suited for the drive axles of various types of
powered machinery (tractor & implement).
- Open centre tread design for effective self-cleaning and better grip.
- 45° lug for good stability on slopes.

Open Center Martillo (OCM)

Power axle tyre with unique hammer head design lugs, reinforced for tough jobs.

32
 bias tyres

Super All Traction 23° (SAT 23°)

The Super All Traction 23° delivers unmatched levels of wear, traction and vibra-
tion resistance.
- Increased number of lugs combined with open center design optimizes wear
and traction, while providing resistance to vibration.
- Flatter tread contour with proven 23° long bar/long bar tread design for excel-
lent traction, long even wear and smooth ride.
- Dual rubber compounds provide long-wearing, tear resistant tread and resis-
tance to cracking and weathering in the sidewall.
- Bead Rim Protector designed to prevent soil from being trapped between the
rim flange and tyre bead.

Super All Traction (SAT)

Design to be used on all types of tractors.
• Double angle lug optimization :
- 23° at shoulder : excellent traction power.
• Wider lugs (more rubber)
- even wear and excellent comfort.
• Bead Rim Protector

Champion Spade Grip (CSG)

Special purpose tractor tyres built for excellent traction in cane, rice,
and wet field farming.
- 45° extra deep traction bars for extra traction in wet ground.
- Reinforced bar nose for tread durability.
- Tapered bars help to maintain stability on hard ground and roadways.
- Dual rubber compound provide long-wearing, tear resistant tread and
resistance to cracking and weathering in the sidewall.

33
 load and
inflation tables
(1)
TRACTION REAR - 30 Km/h
Max. Load per Tyre Pressure per Tyre
1.1 1.4 1.6 1.7 1.8 2.0 2.1 2.2 2.3 2.4
9.5 - 20 6 PR TT - ATC
245 950 432 2840 W8 W7 555 650 700 725 750 800 825
9.5 - 24 4 PR TT - AT F&R
241 1046 483 3150 W8 W7 645 745
9.5 - 24 6 PR TT - ATC
250 1040 478 3113 W8 W7 640 740 800 830 860 910 940
11.2 - 24 4 PR TL - OCM UR (1)
288 1097 507 3282 W 10 W9 1065 1230 1350
11.2 - 24 8 PR TT - ATC
290 1100 502 3291 W 10 W9 770 885 965 1010 1045 1100 1125 1160 1195 1225
12.4 – 24 6 PR TL - SAT
313 1150 522 3425 W 11 W9/W10 930 1030 1160 1215
12.4 – 24 8 PR TT - ATC
322 1143 520 3410 W 11 W9/10 930 1030 1160 1200 1245 1330 1375 1415
13.6 – 24 6 PR TT - ATC
352 1200 543 3583 W 12 W 11 1080 1185 1340
13.6 – 24 8 PR TL - SAT
343 1200 540 3580 W 12 W 11 1080 1185 1340 1390 1445 1545
14.9 – 24 4 PR TL - AT F&R UR (1)
378 1270 572 3785 W 13 W11/12 1790
14.9 – 24 8 PR TT - ATC
378 1265 569 3770 W 13 W11/12 1315 1510 1640 1700 1760
18.4 – 26 12 PR TT - AT F&R (2) (3)
478 1453 650 4323 W 16L W 15L 1990 2265 2455 2550 2645 2790 2855 2920 2985
23.1 – 26 14 PR TT - ATC
586 1578 700 4632 DW20A W18L 2850 3245 3490 3610 3730 3970
11.2 – 28 6 PR TT - ATC
284 1200 553 3586 W 10 W9 815 945 1035 1075 1115
12.4 – 28 6 PR TT - ATC
315 1260 577 3762 W 11 W9/10 1005 1140 1230 1275
13.6 – 28 6 PR TT - ATC
352 1310 597 3908 W 12 W 11 1155 1320 1430
13.6 – 28 8 PR TL - SAT
360 1313 602 3912 W 12 W 11 1155 1320 1430 1500 1550 1650
14.9 – 28 6 PR TT - ATC
378 1367 620 4074 W 13 W11/12 1405 1610
16.9 – 28 8 PR TT - ATC
429 1435 647 4271 W 15L W 14L 1675 1925 2095 2175
14.9 – 30 6 PR TT - ATC
378 1418 645 4219 W 13 W11/12 1450 1665
16.9 – 30 8 PR TT - ATC
429 1485 672 4420 W 15L W 14L 1730 1985 2160 2245
16.9 – 30 8 PR TT - AT F&R (2)
434 1478 670 4404 W 15L W 14L 1730 1985 2160 2245
18.4 – 30 6 PR TT - ATC
471 1546 697 4590 W 16L W 15L 2120
18.4 – 30 8 PR TT - ATC
471 1546 697 4590 W 16L W 15L 2120 2415
18.4 – 30 8 PR TT - AT F&R (2)
476 1559 702 4638 W 16L W 15L 2120 2415
(1) 11.2 - 24 (4 PR) OCM & 14.9 - 24 (4 PR) AT F&R are for use on irrigation equipment, at very low speeds. The tyre load is proportionally higher than for normal tractor applications
(2) F202 - (3) Industrial
34
 load and
inflation tables
TRACTION REAR - 30 Km/h
Max. Load per Tyre Pressure per Tyre
1.1 1.4 1.6 1.7 1.8 2.0 2.1 2.2 2.3 2.9
18.4 – 30 8 PR TL - SAT 23°
467 1560 699 4646 W 16L W 15L 2135 2430
18.4 – 30 12 PR TT - ATC
471 1546 697 4590 W 16L W 15L 2120 2415 2615 2715 2815 2965 3040 3110 3180
23.1 – 30 14 PR TT - AT F&R
595 1694 757 5027 DW20A - 3035 3460 3670 3780 3940 4250
24.5 – 32 20 PR TT - AT F&R
627 1798 803 5332 DW21A DW20A 3465 3950 4255 4390 4600 4905 5000 5150 5275 6000
16.9 – 34 8 PR TT - OCM
420 1572 717 4672 W 15L W 14L 1830 2110 2290 2380
18.4 – 34 8 PR TT - ATC
467 1674 758 4975 W 16L W 15L 2250 2565
18.4 – 34 8 PR TL - SAT 23°
467 1661 747 4851 W 16L W 15L 2325 2650
13.6 – 36 6 PR TT - ATC
352 1510 697 4493 W 12 W 11 1300 1490 1615
15.5 – 38 8 PR TL - SAT 23°
391 1550 721 4675 W 14L - 1550 1765 1915 1990 2060
16.9 – 38 8 PR TL - SAT 23°
429 1684 772 5030 W 15L W 14L 1980 2275 2475 2575
18.4 – 38 8 PR TT - ATC DT
479 1760 803 5242 W 16L W 15L 2380 2715
18.4 – 38 8 PR TL - SAT 23°
480 1768 798 5232 W 16L W 15L 2390 2725
20.8 – 42 14 PR TL - SAT 23°
559 1935 881 5690 W 18A - 3025 3500 3720 3830 4055 4305 4440 4580
13.6 – 46 6 PR TT - CSG
338 1796 843 5423 W 12 W 11 1510 1725 1835
(1) Deep Tread - (2) F202
Note: The tables on pages 28-29 show loads for 30 km/h maximum speed.
For operations at other speeds, the above loads may be changed as shown hereafter.

Maximum % change in loads Changes in

Speed (km/h) from 30 km/h load Infl. Pressure
10 + 40% + 0.3 bar
20 + 20% None
25 + 7% None
30 Same as above table None
35 - 10% None
40 - 20% None

(1) For cyclic operations only, such as combine harvester service, the basic tyre load may be increased by as much as 70%. Basic
inflation pressure must be increased by 25-30%. Vehicle must be unloaded before transport outside of field.
(2) For field (sustained torque) applications the 30 km/h load ratings should not be exceeded by the tractor weight at static conditions.
(3) For tyres used on irrigation equipment that moves at creep speeds (less than 60 m in 30 minutes) the basic tyre loads may be
increased by as much as 60% with a 0.3 bar increase in basic inflation pressure.
(4) Rim/wheel manufacturer should be consulted for approval of rim/wheel strength for load, pressure and speed requirements.
35
 LOAD AND
INFLATION TABLES
COMBINE HARVESTER
APPLICATION - 30 Km/h

Max. Load per Tyre Pressure per Tyre

1.4 1.6 1.7 1.8 2.0 2.1 2.2 2.3 Speed
18.4 – 26 12 PR TT - AT F&R (3)
478 1453 650 4323 W 16L W 15L 2265 2455 2550 2645 2790 2855 2920 2985 30
23.1 – 26 14 PR TT - ATC
586 1578 700 4632 DW20A W 18L 3245 3490 3610 3730 3970 30
28 L 26 14 PR TT - SAT 23°
693 1603 724 4775 DW25A DW23A 3720 4055 4155 30
18.4 – 30 12 PR TT - ATC
471 1546 697 4590 W 16L W 15L 2415 2615 2715 2815 2965 3040 3110 3180 30
“L” in tyre size designates low profile tyre - For Cyclic Application, see note at page 29.
(3) F202

FRONT & IMPLEMENT RANCHER - 30 Km/h

Max. Load per Tyre Pressure per Tyre
1.25 2.25 2.75 3.1 3.25 3.75 4.1 Speed
10.0/75 - 15.3 8 PR TT - T133 (1)
257 780 360 2330 9.00 - 1330 30
11.5/80 - 15.3 12 PR TT - T131
285 873 390 2613 9.00 - 2145 30
6.00 – 16 6 PR TT - T133 (2)
4.00 E
174 751 348 2250 4.50 E 5K 685 30
5.00 F
6.50 – 16 8 PR TT - T133 (2)
4.00 E
187 777 360 2330 4.50 E 5 K - 5 F 925 30
5.50 F
7.50 – 16 8 PR TT - T133
5.00 F
203 800 372 2400 5.50 F 5 K 1100 30
6.00 F
7.50 – 18 PR TT - T131
197 863 392 2604 5.50 F - 950 30
4.50 – 19 2 PR TT - T131 (2)
120 737 350 2240 3.00 D - 295 30
7.50 – 20 6 PR TT - T131
202 915 414 2705 5.50 F 5.00 F
980 30
6.50 F
(1) This tyre has proportionately 25-30% more tread lugs.
(2) Tractor Implement.

36
 LOAD AND
INFLATION TABLES
FRONT & IMPLEMENT RANCHER - 30 Km/h

Max. Load per Tyre Pressure per Tyre

1.25 1.5 2.2 2.5 2.75 3.0 3.5 Speed
4.00 – 8 2 PR TT - T114
107 440 208 1350 3.00 D 2.50 C 155 30
5.0 – 10 2 PR TT - T131
126 515 236 1535 4.00 B 3.50 B 225 30
4.00/5 – 12 2 PR TT - T114
123 528 248 1595 3.00 D 3.00 B
210 30
3.50 B
4.00 – 12 4 PR TT - T133 (3)
112 541 257 1645 3.00 D 2.50 C
300 30
3.00 B
5.00 – 12 6 PR TT - T133 (1)
3.00 D
135 572 271 1740 3.50 D 4.00 E 475 30
4J
6 – 12 2 PR TT - TC (2)
156 574 265 1715 5J 4J
345 30
4.5 J
6.5 / 80 – 12 2 PR TT - T131
163 588 270 1775 5J - 340 30
7.00 – 12 6 PR TT - T133 (1)
180 670 307 1995 5.50 F 5J 680 30
11.0 / 65 – 12 6 PR TT - T133 (1)
265 718 330 2140 9.00 - 1000 30
5.00 – 15 2 PR TT - T114
140 654 319 2025 4.00 E 3.50 D
310 30
4.5 J
8.0/75 – 15 6 PR TT - T133 (1)
199 708 322 2100 6 1/2 K - 800 30
27 X 10 - 15.3 8 PR TT - T133 (1)
261 687 317 2058 9.00 - 1000 30
(1) These tyres have proportionately 25-30% more tread lugs
(2) TC (Closed Center) pattern
(3) Tractor Implement.

37
 notes

38
AGRICULTURAL
TYRES
Free-Rolling Tyres
 free - rolling
tyres

Front Steering

3 RIB 4 RIB RIBBED TRACTION

(RIB)

Implement

RIBBED TRACTOR FARM IMPLMENT TRANSPORT B-213 RIB IMPLEMENT FLOTATION IMPLEMENT
(RIB) (FARM) (B-213) (RIB IMP) (FLOT IMP)

Grassland Application
Particularly suited for airport, golf
course, park and highway mainte-
nance operations.

- Provides maximum flotation and

minimum ground disturbance.
- Non-aggressive multi-block tread
pattern for excellent
traction.

ALL NON SKID ALL NON SKID II TURF & FIELD

40 (ANS) (ANS II)
 Load and
inflation tables
FRONT STEERING - 30 Km/h

Max. Load per Tyre Pressure per Tyre

2.5 2.8 3.1 3.3 3.4 3.6 3.7 3.9 4.4 Speed
4.00 – 12 4 PR TT - RIB
112 534 252 3.00D 2.50C 205 220 235 245 250 30
4.00 – 15 4 PR TT - RIB
112 610 290 3.00D 4J 250 265 280 295 300 30
5.00 – 15 6 PR TT - RIB
144 654 310 4.00E 3.00D/4J/41/2 J 345 365 380 390 395 405 410 425 465 30
5.50 – 16 6 PR TT - RIB
154 716 334 4.00E 3.50D/4.50 E 425 450 475 495 505 520 525 30
5.50 – 16 6 PR TT - 3 RIB
142 716 333 4.00E 3.50D/4.50E 395 430 465 475 485 500 515 530 30
6.00 – 16 6 PR TT - 3 RIB
165 735 330 4.50 E 4.00E/5K/5.00F 480 505 540 560 30
6.00 – 16 6 PR TT - RIB
167 752 345 4.50E 4.00E/5K/5.00F 480 505 540 560 30
6.50 – 16 6 PR TT - RIB
170 745 347 4.50E 4.00E/5K/5.00F/5.50F 545 580 615 30
6.50 – 16 6 PR TT - 3 RIB
173 762 356 4.50E 4.00E/5K/5.00F/5.50F 515 555 590 625 30
7.00 – 16 8 PR TT - RIB
183 774 363 5.00 F 5.50 F 655 700 730 750 770 800 820 30
7.50 – 16 6 PR TT - 3 RIB
203 813 378 5.50 F 5.00F/5K/6.00F 670 700 745 30
7.50 – 16 8 PR TT - 3 RIB
205 805 363 5.50 F 5.00F/5K/6.00F 705 745 785 815 830 855 870 30
7.50 – 16 8 PR TT - RIB
204 798 370 5.50 F 5.00F/5K/6.00F 705 745 785 815 830 855 870 30
9.00 – 16 10 PR TL - 4 RIB
254 855 387 W8 W7/W8L/6.00F 950 1010 1080 1140 1155 1185 1205 1245 30
10.00 – 16 10 PR TL - 3 RIB
274 895 401 W8 W8L 1110 1190 1260 1300 1325 30
11.00 – 16 8 PR TL - 3 RIB
315 965 434 W10L W8/W8L 1320 30
11.00 – 16 8 PR TL - 4 RIB
325 965 437 W10L W8/W8L 1245 1310 30
11.00 – 16 12 PR TL - 4 RIB
325 965 437 W10L W8/W8L 1245 1310 1415 1470 1490 1555 1620 1665 30
7.50 – 18 8 PR TL - RIB
212 866 396 5.50 F - 760 810 855 880 895 930 945 30
7.50 – 18 8 PR TT - 3 RIB
205 860 389 5.50 F - 760 810 855 880 895 930 945 30

41
 Load and
inflation tables
FRONT STEERING - 30 Km/h

Max. Load per Tyre Pressure per Tyre

2.5 2.8 3.1 3.3 3.4 3.6 3.7 3.9 4.4 4.7 Speed
7.50 – 18 8 PR TL - 4 RIB
205 860 389 5.50 F - 760 810 855 880 895 930 945 30
7.50 – 18 10 PR TT - RIB
212 866 396 5.50 F - 760 810 855 880 895 930 945 970 1030 1065 30
12.5/80 – 18 12 PR TL - 4 RIB
308 965 436 W9 11 1410 1500 1600 1670 1695 1750 30
4.00 – 19 4 PR TT - RIB
112 714 340 3.00D - 295 315 335 345 355 30
6.00 – 19 6 PR TT - RIB
162 812 380 4.50E 4.00E/5.00 F 545 580 615 640 30
6.50 – 20 6 PR TT - RIB
176 850 405 5.00 F 4.00E/5.50 F 645 685 725 30
7.50 - 20 6 PR TT - RIB
198 906 425 5.50 F 5.00 F 825 875 30
7.50 – 20 6 PR TT - 3 RIB
201 909 414 5.50 F 5.00 F 770 815 865 30
9.50 – 20 8 PR TT - 3 RIB
254 970 460 W 7L 5.50 F 1110 1180 1245 30

Note: The tables on pages 33-34 show loads for 30 km/h maximum speed.
For operations at other speeds, the above loads may be changed as shown hereafter.

Maximum % change in loads Changes in

Speed (km/h) from 30 km/h load Infl. Pressure
10 + 100% (1) + 25%
10 + 50% (2) + 25%
20 + 35% None
25 + 15% None
30 Same as above table None
35 - 10% None
40 - 20% None

(1) For front end loader service (6 ply rating and above) with a 25% increase in inflation pressure.
(2) 6 ply rating and above with a 25% increase in inflation pressure.
(3) Rim/wheel manufacturer should be consulted for approval of rim/wheel strength for load, pressure and speed require-
ments.

42
 Load and
inflation tables
(1)
IMPLEMENT - 30 Km/h

Max. Load per Tyre Pressure per Tyre

1.7 1.9 2.4 2.5 3.0 3.1 3.9 4.1 4.3 4.7 5.4 6.0 8.0 Speed
7.00 – 12 6 PR TT - RIB
174 661 305 5.00 F 680 30
8.50 – 12 6 PR TT - RIB
235 716 329 7.00 1040 30
26 x 12.00 – 12 4 PR TL - RIB Imp
290 640 300 101/2 JA 590 30
11L – 14 8 PR TL - FARM
274 747 333 8 KB 1100 30
8.25 – 15 18 PR TT - B-213 (4)
233 838 390 6.00 2670 30
9.5L – 15 8 PR TL - FARM
239 762 338 8 LB 1120 30
10.0 - 15.3 10 PR TT - FARM (2)
258 784 360 9.00 1525 30
11.5 - 15.3 12 PR TT - FARM (3)
295 860 384 9.00 2145 30
11.5 - 15.3 16 PR TT - FARM (3)
295 860 384 9.00 2505 30
7.50 – 16 10 PR TT - RIB
204 798 370 5.50 F 985 30
10.5 – 16 14 PR TT - FARM
280 955 434 W9 2600 30
16.5L - 16.1 8 PR TL - FARM
414 1013 455 W14C 2000 30
21.5L - 16.1 14 PR TL - FARM
554 1105 472 W18C 3550 30
10.0 – 18 8 PR TT - FARM
260 875 396 9.00 1480 30
13.0 / 65 – 18 14 PR TT - FARM
335 875 404 11 2555 30
6.00 – 20 10 PR TT - B-213 (4)
167 844 407 5.00 S 1170 30
4.00/4.50 – 21 4 PR TT - RIB
111 764 357 3.00 D 485 30
5.00/5.25 – 21 6 PR TT - RIB
135 812 375 3.50 D 650 30
700/50 - 22.5 16 PR TL - FLOT Imp
696 1270 541 24.00 (15°) 5300 50
(1) The table shows loads for 30 km/h maximum speed except for 700/50-22.5 Flotation Implement (50 km/h).
(2) Equivalent to 10.0/75 - 15.3
(3) Equivalent to 11.5/80 - 15.3
(4) Transport B-213
“L” in tyre designates low profile tyre.

43
 Load and
inflation tables
GRASSLAND APPLICATION

Max. Load per Tyre Pressure per Tyre

0.7 1.1 1.4 1.7 2.1 2.8 3.1 Speed
31x13.50 - 15 8 PR TL (NHS) - TURF & FIELD 790 1000 1185 1345 1505 1770 1865 10
560 710 840 955 1065 1255 1325 30
348 777 343 2302 10 LB -
500 630 750 850 950 1120 1180 50
NHS : Not for Highway Service.

Max. Load per Tyre Pressure per Tyre

1.7 1.9 2.2 2.5 2.8 Speed
13.50 - 16.1 10 PR TL - ANS 1840 2015 2245 2440 2580 15
343 1031 444 3048 W11C - 1600 1750 1950 2120 2240 40
16.5 L - 16.1 6 PR TL - ANS 2070 15
414 1036 447 2946 W14C 14 LB 1800 40
16.5 L - 16.1 10 PR TL - ANS 2070 2300 2510 2715 15
414 1036 447 2946 W14C 14 LB 1800 2000 2180 2360 40
“L” in tyre size designates low profile tyre.

Max. Load per Tyre Pressure per Tyre

0.8 1.1 1.2 1.4 1.5 Speed
18.4 - 16.1 6 PR TL - ANS 1300 1530 15
1085 1280 30
467 1107 478 3175 W16C 16 LB
975 1150 40
21.5 L - 16.1 6PR TL - TURF & FIELD 1665 15
1390 30
528 1120 490 3225 W18C 16 LB
1250 40
8.3 – 24 4 PR TL - ANS 535 615 665 705 745 15
445 515 555 590 625 30
211 986 457 2946 W7 W6
400 460 500 530 560 40
9.5 – 24 4 PR TT - ANS 665 775 840 895 15
555 645 700 745 30
241 1011 470 3023 W8 W7
500 580 630 670 40
14.9 – 24 6 PR TL - ANS 1330 1570 1710 1810 15
1110 1310 1430 1510 30
378 1265 574 3734 W13 W12
1000 1180 1285 1360 40
“L” in tyre size designates low profile tyre.

44
 Load and
inflation tables
GRASSLAND APPLICATION

Max. Load per Tyre Pressure per Tyre

0.8 1.1 1.2 1.4 1.5 1.7 1.8 1.9 Speed
16.9 – 24 6 PR TL - ANS 1620 1930 2065 15
1350 1610 1725 30
437 1308 584 3860 W15L W14L
1215 1450 1550 40
18.4 – 26 6 PR TL - ANS 1995 2395 15
1665 2000 30
483 1448 650 4265 DW16A W15L
1500 1800 40
18.4 – 26 10 PR TL - ANS 1995 2395 2530 2740 2900 2980 3140 15
1665 2000 2110 2290 2420 2490 2620 30
483 1448 650 4265 DW16A W15L
1500 1800 1900 2060 2180 2240 2360 40
23.1 – 26 12 PR TL - ANS 2900 3425 3625 3860 4090 4325 15
2420 2860 3025 3220 3415 3610 30
587 1516 681 4470 DW20A -
2180 2575 2725 2900 3075 3250 40
28 L – 26 12 PR TL - ANS 3325 3990 4190 4460 15
2775 3330 3500 3720 30
693 1496 676 4470 DW25A -
2500 3000 3150 3350 40
28 L – 26 12 PR TL - ANS II (1) 3325 3990 4190 4460 15
2775 3330 3500 3720 30
714 1590 709 4648 DW25A -
2500 3000 3150 3350 40
28 L – 26 16 PR TL - ANS 3325 3990 4190 4460 4725 4990 5320 5490 15
2775 3330 3500 3720 3945 4165 4440 4580 30
693 1496 676 4470 DW25A -
2500 3000 3150 3350 3550 3750 4000 4125 40
28 L – 26 16 PR TL - ANS II (1) 3325 3990 4190 4460 4725 4990 5320 5490 15
2775 3330 3500 3720 3945 4165 4440 4580 30
714 1590 709 4648 DW25A -
2500 3000 3150 3350 3550 3750 4000 4125 40
13.6 – 28 6 PR TT - ANS 1200 1410 1530 1620 1710 15
1000 1180 1280 1350 1430 30
345 1308 594 3886 DW12A W11
900 1060 1150 1215 1285 40
30.5 L – 32 14 PR TL - ANS 4190 4990 5320 5655 5985 15
3500 4165 4440 4720 4995 30
762 1753 782 5105 DW27A DH27
3150 3750 4000 4250 4500 40
30.5 L – 32 16 PR TL - ANS 4190 4990 5320 5655 5985 6320 6650 15
3500 4165 4440 4720 4995 5275 5550 30
762 1753 782 5105 DW27A DH27
3150 3750 4000 4250 4500 4750 5000 40
VA 35.5 L – 32 20 PR TL - ANS 5655 6650 7050 7715 7980 8380 8915 9180 15
4720 5550 5885 6440 6660 6995 7440 7660 30
925 1986 838 5690 31VA -
4250 5000 5300 5800 6000 6300 6700 6900 40
“L” in tyre size designates low profile tyre.
(1) ANS II is dimensionally larger with deeper tread than ANS.

45
 Notes

46
AGRICULTURAL
TYRES
Flotation Tyres
 flotation
tyres

23° & 23° Center Rib

Design 1 Design 2 23° Center Rib

23° Deep Tread (23° DT)

Design 1 Design 2 Design 3

All Terrain
Large volume tyres:
- Ideal for use with heavy materials which require minimum
compaction: spreaders, beet lifters, silo fillers, …
- Large air volume permits low inflation pressure.
- Very large tyre tread ensures comfort and stability.
- 23° lugs produce excellent traction power.

48
 load and
inflation tables
FLOTATION TYRES

Max. Load per Tyre Pressure per Tyre

0.55 0.7 0.8 1 1.1 1.2 1.4 2.9 Speed
26 X 12.00 - 12 4 PR TL - 23° (1)
307 663 307 1964 101/2 JA 470 540 600 660 710 760 810 15
26 X 12.00 – 12 8 PR TL - 23° (1)
307 663 307 1964 101/2 JA 470 540 600 660 710 760 810 1250 15
Note : This table shows loads for 15 km/h maximum speed.
For 50 km/h service, the above loads must be reduced by multiplying them by 0.8 at the same inflation pressure.
(1) Design 1

Max. Load per Tyre Pressure per Tyre

0.7 1.1 1.4 1.7 2.1 2.4 2.8 3.1 Speed
31 X 15.50 - 15 8 PR TL - 23° Design 1 815 1030 1225 1385 1545 1675 1820 1975 10
680 860 1025 1155 1290 1400 1520 1650 15
394 792 356 2346 13LB 580 730 870 980 1095 1190 1290 1400 30
515 650 775 875 975 1060 1150 1250 50

Max. Load per Tyre Pressure per Tyre

0.7 1 1.4 1.7 2.1 2.4 2.8 3.1 Speed
42 X 25.00 - 20 8 PR TL - 23° Center Rib 1425 1820 2150 2450 2690 10
1190 1520 1800 2050 2245 15
635 1074 498 3251 20.50VF 1010 1290 1525 1740 1905 30
900 1150 1360 1550 1700 50
42 X 25.00 – 20 12 PR TL - 23° DT Design 1 1425 1820 2150 2450 2690 3005 3160 3445 10
1190 1520 1800 2050 2245 2510 2640 2880 15
622 1113 516 3378 20.50VF 1010 1290 1525 1740 1905 2130 2240 2445 30
900 1150 1360 1550 1700 1900 2000 2180 50
48 X 25.00 - 20 10 PR TL - 23° Center Rib 2150 2690 3160 3635 4070 4425 10
1800 2245 2640 3040 3400 3700 15
635 1232 544 3632 20.50VF 1525 1905 2240 2580 2885 3140 30
1360 1700 2000 2300 2575 2800 50
48 X 25.00 - 20 10 PR TL - 23° DT Design 1 2150 2690 3160 3635 4070 4425 10
1800 2245 2640 3040 3400 3700 15
635 1295 569 3810 20.50VF 1525 1905 2240 2580 2885 3140 30
1360 1700 2000 2300 2575 2800 50
48 X 31.00 - 20 10 PR TL - 23° DT Design 1 2215 2845 3350 3840 4190 10
1850 2380 2800 3210 3500 15
775 1295 577 3835 26.00VF 1570 2020 2375 2725 2970 30
1400 1800 2120 2430 2650 50

Max. Load per Tyre Pressure per Tyre

0.7 1 1.4 1.7 2.1 2.4 2.8 3.1 Speed
10.50/50 R25 172B Radial Flotation 23 Deep Tread 4424 5530 6715 7505 8374 9164 9954 10
3136 3920 4760 5320 5936 6496 7056 30
1049 1709 767 5130 36.0 TH -
2800 3500 4250 4750 5300 5800 6300 50

Max. Load per Tyre Pressure per Tyre

1.2 1.4 1.6 1.7 1.9 2.1 2.25 2.4 2.6 Speed
600/55-22.5 16PR Flotation Implement
600 1270 541 3607 20 - 2500 2725 3000 3350 3550 3875 4125 4375 4625 50

49
 load and
inflation tables
FLOTATION TYRES

Max. Load per Tyre Pressure per Tyre

0.7 1 1.4 1.7 2.1 2.4 2.8 3.1 Speed
48X31.00 – 20 14 PR TL - 23° Center Rib 2215 2845 3350 3840 4190 4585 4980 5295 10
1850 2380 2800 3210 3500 3830 4160 4425 15
787 1232 551 3658 26.00VF 1570 2020 2375 2725 2970 3250 3530 3755 30
1400 1800 2120 2430 2650 2900 3150 3350 50
48X31.00 – 20 14 PR TL - 23° DT Design 1 2215 2845 3350 3840 4190 4585 4980 5295 10
1850 2380 2800 3210 3500 3830 4160 4425 15
775 1295 577 3835 26.00VF 1570 2020 2375 2725 2970 3250 3530 3755 30
1400 1800 2120 2430 2650 2900 3150 3350 50
800/50 – 25 12 PR TL (54X31.00-25) - 23° Design 2 (1) 2690 3350 3950 4585 5135 5610 10
2245 2800 3300 3830 4290 4690 15
762 1443 650 4318 25.0TH 1905 2375 2800 3250 3640 3980 30
1700 2120 2500 2900 3250 3550 50
54X37.00 – 25 12 PR TL (54X31.00-25) - 23° DT Design 1 2845 3635 4310 4860 5455 5925 10
2380 3040 3600 4060 4555 4950 15
940 1430 655 4369 32.0TH 2020 2580 3055 3445 3865 4200 30
1800 2300 2725 3075 3450 3750 50
66X43.00 – 25 10 PR TL (54X31.00-25) - 23° Design 2 4190 5295 6320 7110 10
3500 4425 5280 5940 15
1049 1689 749 5004 36.0TH 2970 3755 4480 5040 30
2650 3350 4000 4500 50
66X43.00 – 25 10 PR TL - 23° DT Design 1 4190 5295 6320 7110 10
3500 4425 5280 5940 15
1054 1722 770 5131 36.0TH 2970 3755 4480 5040 30
2650 3350 4000 4500 50
66X43.00 – 25 16 PR TL - 23° DT Design 1 4190 5295 6320 7110 7900 8850 9480 10
3500 4425 5280 5940 6600 7395 7920 15
1054 1722 770 5131 36.0TH 2970 3755 4480 5040 5600 6275 6720 30
2650 3350 4000 4500 5000 5600 6000 50
66X44.00 – 25 6 PR TL - All Terrain 4310 5455 10
3600 4555 15
1118 1702 739 5004 36.0TH 3055 3865 30
2725 3450 50
66X44.00 – 25 16 PR TL - All Terrain 4310 5455 6520 7310 8140 9165 9720 10
3600 4555 5445 6105 6800 7660 8120 15
1118 1702 739 5004 36.0TH 3055 3865 4620 5180 5770 6500 6890 30
2725 3450 4125 4625 5150 5800 6150 50
67X34.00 – 25 12 PR TL - 23° Design 2 4190 5295 6320 7310 8140 8850 10
3500 4425 5280 6105 6800 7395 15
864 1727 770 5131 30.0TH 2970 3755 4480 5180 5770 6275 30
2650 3350 4000 4625 5150 5600 50

50
 load and
inflation tables
FLOTATION TYRES

Max. Load per Tyre Pressure per Tyre

0.7 1 1.4 1.7 2.1 2.4 2.8 Speed
68X50.00 – 32 16 PR TL - 23° DT Design 3 4190 5295 6320 7110 7900 8850 10
3500 4425 5280 5940 6600 7395 15
1270 1753 770 5182 DW44A 2970 3755 4480 5040 5600 6275 30
2650 3350 4000 4500 5000 5600 50
VA 73X44.00 - 3212 PR TL - 23° DT Design 1 4860 6125 7310 8375 9165 10
4060 5115 6105 7000 7660 15
1097 1880 826 5563 36.0VA 3445 4340 5180 5940 6500 30
3075 3875 4625 5300 5800 50
VA 73X44.00 - 3216 PR TL - 23° DT Design 1 4860 6125 7310 8375 9165 10270 10905 10
4060 5115 6105 7000 7660 8580 9110 15
1097 1880 826 5563 36.0VA 3445 4340 5180 5940 6500 7280 7730 30
3075 3875 4625 5300 5800 6500 6900 50
76X50.00 – 32 16 PR TL (1250/45-32) - 23° DT Design 1 5610 7110 8375 9480 10590 11535 10
4690 5940 7000 7920 8845 9640 15
1234 1994 917 5918 44DWM 3980 5040 5940 6720 7505 8180 30
3550 4500 5300 6000 6700 7300 50
78X45.00 – 32 16 PR TL - 23° DT Design 2 5770 7310 8615 9720 10905 11850 13035 10
4820 6105 7195 8120 9110 9900 10890 15
1156 2012 930 5969 41DWM 4090 5180 6105 6890 7730 8400 9240 30
3650 4625 5450 6150 6900 7500 8250 50

For operations at stationary or creep speeds, the loads may be changed (with no change in inflation pressure) as follows:

Maximum % change in loads

Speed (km/h) from 50 km/h load
Creep + 100%
Stationary + 165%

For variable loading operation, where load on machine increases and decreases, the loads may be changed as follows:

Maximum % change in loads Changes in

Speed (km/h) from 50 km/h load Infl. Pressure
30 + 50% + 0.4 bar
25 + 70% + 0.4 bar
15 + 85% + 0.4 bar

For an operation to be a variable loading operation:

1) The minimum load must not exceed 60 % of the maximum tyre load for the operation.
2) Maximum load may not be carried more than 1.5 km before unloading operations starts.
3) Loading and unloading must be completed within 1.5 km.

51
 notes

52
 Industrial Tyres
Light Industrial Application
 industrial
tyres

RADIAL BIAS

IND

DuraForce Utility STL ATU

AG

R8000 Utility S8000 Utility

INDUSTRIAL LINE-UP
10.5 280/80 - 18 10.5/80 - 18
340/80 R18 340/80 R18 340/80 (12.5 - 18) - (12.5/80 - 18) 12.0/12 - 18
400/70 R18
280/80 (10.5 - 20) 10-20
340/80 R20 340/80 (12.5 - 20) 12.5-20
365/80 R20
400/70 R20 400/70 R20
400/80 R24 400/80 - 24*
400/70 R24 14.9 - 24
16.9 - 24
460/70 R24 17.5L - 24
19.5L - 24
480/80 R26 480/80 (18.4 - 26)
440/80 R28 440/80 R28 440/80 (16.9 - 28) 16.9 - 28
18.4 - 28
16.9 - 30

DuraForce Utility R8000 Utility STL *S8000 Ut. ATU

54
 industrial tyres
LIGHT INDUSTRIAL APPLICATION

DuraForce Utility NEW

The Firestone DURAFORCE UTILITY is designed for backhoe loaders and
compact wheeled loaders.

Farmers/End-users benefits:

- Excellent grip on hard surfaces due to new block pattern designed for
pure industrial applications
- Excellent lateral stability due to extra wide tread arc and extra thick side-
wall
- Uniform tread wear due to wide and flat tread contour
- Cut and puncture resistance due to:
- compounds specifically developed for severe service conditions
- extra thick skid base gauge and curb ribs

s i z es
Super Traction Loader (STL) N ew
Designed for efficient and economical use with industrial tractors and light
construction equipment (back-hoes, telehandlers, loaders,...)
High performance on road service with good irregular wear resistance.
Tread lug shape resists distortion for good roadwear characteristics to
ensure long tyre life.

- Very good shock absorption

- High resistance
- Excellent Stability and Handling
- Strong Traction and good grip on hard and soft surfaces

55
 industrial
tyres

R8000 & S8000 Utility

The Firestone R8000 (Radial) and S8000 (Bias) UTILITY are designed for mixed indus-
trial and agricultural service. They combine outstanding stability, grip and wear
uniformity on yard and road surfaces, with excellent field performance.

• ON HARD-SURFACE SITES
EXCELLENT LATERAL STABILITY AND SAFETY
- Due to extra-wide tread arc to prevent tilt, even with maximum loader-arm extension
- Extra-thick sidewall adds more stability

RELIABLE GRIP ON HARD SURFACES

Due to sturdy, stable lug geometry which ensures handling stability and grip

UNIFORM TREAD WEAR

New lug technology reduces ‘trail’ angle
and trailing-edge ROTATION
<
stiffness, inducing a smoother release for
improved wear uniformity

• IN THE FIELD & LOOSE SOIL

GOOD FIELD TRACTION
Optimised shoulder angle of lug TRAILING EDGE OF LUG

CUT AND PUNCTURE RESISTANT

- More resistant compound for severe service conditions
- Extra-thick skid base provides higher puncture resistance

Radial All Traction Utility (RATU)

Designed for light construction machines like tractor-loader-backhoe. For
the tough on-and-off the road tyre requirements of today’s utility tractors
where moderate traction, as well as flotation and long wear, is needed.

- Gives long tread life on hard surface roads.

- Built with Firestone special rubber compounds and nylon cord body.

56
 industrial tyres

All Traction Utility (ATU)

A tyre for use on industrial tractors and light construction equipment:
Reinforced sidewalls and crossed centre lugs for:
- A larger footprint and greater cut resistance.
A rugged construction:
- To give long service in industrial applications.

SKID STEER APPLICATION

Super Traction Duplex (ST Duplex)

A tyre designed to give excellent performance on industrial tractors and light
construction equipment:
- New front axle pattern, with increased number of lugs, flat tread contour and
wider footprint.
- Tread lug shape resists distortion for good roadwear characteristics to ensure
long tyre life.

DuraForce DT
Designed specifically for skid-steer loaders in the most demanding applica-
tions,
the DuraForce DT features an extra-tough nylon body construction and special
cut-/tear-resistant compounds for lasting performance.
- Deep tread and extra-wide, heavily buttressed lugs for extra-long wear and
extended tyre life.
- Aggressive rim deflector helps keep foreign material out to protect against
rim damage and deflation.
- Strong shoulder resists snags, cuts & punctures.

57
 load and
inflation tables
LIGHT INDUSTRIAL APPLICATION
DURAFORCE UTILITY
Max. Load per Tyre Pressure per Tyre
1.50 1.75 2.00 2.25 2.50 2.75 3.00 3.25 3.50 3.75 4.00 Speed
340/80 R18 IND DURAFORCE UTILITY 143A8
3085 3385 3685 4000 4310 4650 4985 5310 5635 5955 6270 Stationary
2015 2205 2405 2610 2810 3030 3250 3465 3675 3885 4090 10*
343 1008 452 3037 11 W12 1675 1840 2000 2175 2340 2525 2710 2885 3065 3235 3410 10
W10 1395 1530 1665 1810 1945 2100 2255 2400 2550 2695 2835 30
1340 1470 1600 1740 1870 2020 2165 2310 2450 2590 2725 40
1220 1340 1460 1585 1705 1840 1970 2100 2230 2355 2480 50
400/70 R18 DURAFORCE UTILITY 147A8
3300 3680 4040 4385 4720 5095 5460 5870 6275 6675 7075 Stationary
2155 2400 2635 2860 3080 3325 3565 3830 4095 4355 4615 10*
404 1017 455 3079 13 12 1795 2000 2195 2385 2565 2770 2970 3190 3410 3630 3845 10
13.00 1535 1710 1880 2040 2195 2370 2540 2730 2920 3105 3290 30
1435 1600 1755 1905 2055 2215 2375 2550 2730 2905 3075 40
1305 1455 1600 1735 1870 2015 2160 2325 2485 2640 2800 50
340/80 R20 IND DURAFORCE UTILITY 144A8
3170 3475 3785 4110 4425 4775 5120 5455 5790 6120 6440 Stationary
2065 2265 2470 2680 2885 3115 3340 3560 3775 3990 4200 10*
343 1052 473 3178 11 W12 1725 1890 2060 2235 2405 2595 2780 2965 3145 3325 3500 10
W10 1435 1570 1710 1860 2000 2160 2315 2470 2620 2770 2915 30
1380 1515 1650 1790 1925 2080 2225 2375 2520 2660 2800 40
1255 1375 1500 1625 1750 1890 2025 2160 2290 2420 2550 50
1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00 3.25 3.50 3.75 Speed
365/80 R20 DURAFORCE UTILITY 144A8
2545 2895 3225 3540 3845 4140 4465 4790 5145 5500 5850 Stationary
1725 1960 2185 2400 2605 2805 3025 3245 3485 3725 3965 10*
360 1092 492 3299 11 W12 1440 1635 1820 2000 2170 2335 2520 2705 2905 3105 3305 10
1190 1350 1505 1650 1795 1930 2085 2235 2400 2565 2730 30
1150 1310 1460 1600 1740 1870 2020 2165 2325 2485 2645 40
1120 1275 1420 1555 1690 1820 1965 2105 2260 2420 2575 50
1.50 1.75 2.00 2.25 2.50 2.75 3.00 3.25 3.50 3.75 4.00 Speed
400/70 R20 IND DURAFORCE UTILITY 149A8
3490 3885 4265 4635 4990 5385 5770 6200 6630 7055 7475 Stationary
2275 2535 2785 3025 3255 3510 3765 4045 4325 4600 4875 10*
404 1068 480 3227 13 12 1895 2115 2320 2520 2710 2925 3140 3370 3605 3835 4065 10
W14L 1580 1760 1930 2095 2255 2435 2610 2805 3000 3190 3380 30
1520 1690 1855 2015 2170 2340 2510 2700 2885 3070 3250 40
1380 1540 1690 1835 1975 2130 2285 2455 2625 2795 2960 50
1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 Speed
480/80 R26 IND DURAFORCE UTILITY 160A8
5345 5860 6350 6815 7295 7800 8290 8765 9305 9830 10350 Stationary
3485 3825 4145 4445 4760 5090 5405 5720 6070 6410 6750 10*
479 1428 642 4307 W15L W16L 2905 3185 3450 3705 3965 4240 4505 4765 5055 5345 5625 10
2415 2650 2870 3080 3300 3530 3750 3965 4205 4445 4680 30
2325 2550 2760 2965 3175 3395 3605 3815 4045 4275 4500 40
2115 2320 2515 2695 2890 3085 3280 3470 3680 3890 4095 50
440/80 R28 IND DURAFORCE UTILITY 156A8
4725 5185 5615 6025 6485 6935 7370 7795 8270 8740 9200 Stationary
3080 3380 3660 3930 4230 4520 4805 5085 5395 5700 6000 10*
441 1420 637 4291 W14L W15L 2570 2815 3050 3275 3525 3770 4005 4235 4495 4750 5000 10
2140 2345 2540 2725 2935 3135 3335 3525 3740 3955 4160 30
2055 2255 2445 2620 2820 3015 3205 3390 3595 3800 4000 40
1870 2055 2225 2385 2570 2745 2915 3085 3275 3460 3640 50
58
 load and inflation tables
LIGHT INDUSTRIAL APPLICATION

SUPER TRACTION LOADER

Max. Load per Tyre Pressure per Tyre
1.50 1.75 2.0 2.25 2.5 2.75 3.0 3.25 3.5 3.75 4.0 Speed
280/80 – 18 132 A8 (10.5-18) TL - STL
2265 2485 2705 2935 3160 3410 3655 3900 4135 4370 4600 Stationary
1480 1620 1765 1915 2060 2225 2385 2545 2700 2850 3000 10*
1230 1350 1470 1595 1720 1855 1990 2120 2250 2375 2500 10
278 912 412 2712 W9 9 W8
1025 1125 1225 1330 1430 1540 1655 1765 1870 1975 2080 30
985 1085 1180 1280 1375 1485 1590 1695 1800 1900 2000 40
895 980 1070 1160 1250 1350 1450 1545 1640 1730 1820 50
340/80 – 18 143 A8 (12.5-18) TL - STL
3085 3385 3685 4000 4310 4650 4985 5310 5635 5955 6270 Stationary
2015 2205 2405 2610 2810 3030 3250 3465 3675 3885 4090 10*
328 984 444 2924 11 W11 1675 1840 2000 2175 2340 2525 2710 2885 3065 3235 3410 10
W10 1395 1530 1665 1810 1945 2100 2255 2400 2550 2695 2835 30
1340 1470 1600 1740 1870 2020 2165 2310 2450 2590 2725 40
1220 1340 1460 1585 1705 1840 1970 2100 2230 2355 2480 50
280/80 – 20 133 A8 (10.5-20) TL - STL
2330 2555 2785 3025 3255 3515 3765 4015 4260 4500 4740 Stationary
1520 1670 1815 1975 2125 2295 2460 2620 2780 2935 3090 10*
1265 1390 1515 1645 1770 1910 2045 2180 2315 2445 2575 10
268 995 448 2962 W9 9 W8
1055 1160 1260 1370 1475 1590 1705 1815 1925 2035 2145 30
1015 1115 1210 1315 1415 1530 1640 1745 1855 1960 2060 40
925 1015 1105 1200 1290 1390 1490 1590 1685 1780 1875 50
340/80 – 20 144 A8 (12.5-20) TL - STL
3170 3475 3785 4110 4425 4775 5120 5455 5790 6120 6440 Stationary
2065 2265 2470 2680 2885 3115 3340 3560 3775 3990 4200 10*
325 1016 459 3029 11 W11 1725 1890 2060 2235 2405 2595 2780 2965 3145 3325 3500 10
W10 1435 1570 1710 1860 2000 2160 2315 2470 2620 2770 2915 30
1380 1515 1650 1790 1925 2080 2225 2375 2520 2660 2800 40
1255 1375 1500 1625 1750 1890 2025 2160 2290 2420 2550 50

1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 Speed
480/80 – 26 160 A8 (18.4-26) TL - STL
5345 5860 6350 6815 7295 7800 8290 8765 9305 9830 10350 Stationary
3485 3825 4145 4445 4760 5090 5405 5720 6070 6410 6750 10*
2905 3185 3450 3705 3965 4240 4505 4765 5055 5345 5625 10
496* 1425* 651 4302 W16L W15L
2415 2650 2870 3080 3300 3530 3750 3965 4205 4445 4680 30
2325 2550 2760 2965 3175 3395 3605 3815 4045 4275 4500 40
2115 2320 2515 2695 2890 3085 3280 3470 3680 3890 4095 50
440/80 – 28 156 A8 (16.9-28) TL - STL
4725 5185 5615 6025 6485 6935 7370 7795 8270 8740 9200 Stationary
3080 3380 3660 3930 4230 4520 4805 5085 5395 5700 6000 10*
2570 2815 3050 3275 3525 3770 4005 4235 4495 4750 5000 10
459* 1420* 646 4257 W15L W14L
2140 2345 2540 2725 2935 3135 3335 3525 3740 3955 4160 30
2055 2255 2445 2620 2820 3015 3205 3390 3595 3800 4000 40
1870 2055 2225 2385 2570 2745 2915 3085 3275 3460 3640 50

59
 load and
inflation tables
LIGHT INDUSTRIAL APPLICATION
R8000 UTILITY

Max. Load per Tyre Pressure per Tyre

1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 Speed
340/80 R18 IND 136A8 TL - R8000 Utility
2720 2985 3230 3470 3695 3910 4160 4400 4630 4895 5155 Stationary
1775 1945 2110 2265 2410 2555 2715 2870 3020 3195 3360 10*
343 1005 452 3037 11 W10 1480 1625 1760 1885 2010 2130 2260 2390 2520 2660 2800 10
W11 1230 1350 1465 1570 1670 1770 1880 1990 2095 2215 2330 30
1185 1300 1405 1510 1610 1700 1810 1915 2015 2130 2240 40
1075 1180 1280 1375 1465 1550 1645 1740 1835 1940 2040 50
1.5 1.75 2.0 2.25 2.5 2.75 3.0 3.25 3.5 3.75 4.0 Speed
400/70 R20 IND 149 A8 TL - Equivalent to 16.0/70 - 20 - R8000 Utility
3490 3885 4265 4635 4990 5385 5770 6200 6630 7055 7475 Stationary
2275 2535 2785 3025 3255 3510 3765 4045 4325 4600 4875 10*
1895 2115 2320 2520 2710 2925 3140 3370 3605 3835 4065 10
400 1068 480 3227 13 14
1580 1760 1930 2095 2255 2435 2610 2805 3000 3190 3380 30
1520 1690 1855 2015 2170 2340 2510 2700 2885 3070 3250 40
1380 1540 1690 1835 1975 2130 2285 2455 2625 2795 2960 50
1.5 1.75 2.0 2.25 2.5 2.75 3.0 3.25 3.5 3.75 4.0 Speed
400/80 R24 IND 156 A8 TL - Equivalent to 15.5/80 - 24 - R8000 Utility
3740 4105 4505 4890 5265 5630 6035 6435 6830 7215 7600 Stationary
2950 3240 3555 3860 4155 4445 4765 5080 5390 5695 6000 10*
404 1270 571 3822 W13 13 2460 2700 2960 3215 3465 3700 3970 4230 4490 4745 5000 10
W14L 2045 2245 2465 2675 2880 3080 3305 3520 3735 3950 4160 30
1965 2160 2370 2575 2770 2960 3175 3385 3595 3795 4000 40
1790 1965 2155 2345 2520 2695 2890 3080 3270 3455 3640 50
1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 Speed
460/70 R24 IND (17.5LR24) 152 A8 TL - R8000 Utility
4160 4565 4945 5310 5715 6110 6495 6870 7290 7705 8165 Stationary
2715 2975 3225 3460 3725 3985 4235 4480 4755 5025 5325 10*
458 1245 560 3762 W15L W14L
2260 2480 2690 2885 3105 3320 3530 3735 3965 4190 4440 10
DW14L
1880 2065 2235 2400 2585 2765 2935 3105 3295 3485 3695 30
DW15L
1810 1985 2150 2305 2485 2655 2820 2985 3170 3350 3550 40
1645 1805 1955 2100 2260 2415 2570 2720 2885 3050 3235 50
2.5 2.75 3.0 3.25 3.5 3.75 4.0 4.25 4.5 4.75 5.0 Speed
400/70 R24 IND 158A8 TL - R8000 Utility
5490 5925 6355 6775 7190 7595 8000 8445 8890 9335 9775 Stationary
3585 3865 4145 4420 4690 4955 5215 5510 5800 6090 6375 10*
405 1180 531 3566 13 W12
2985 3220 3455 3680 3905 4130 4345 4590 4835 5075 5315 10
W13
2485 2680 2875 3065 3255 3435 3620 3820 4025 4225 4420 30
W14L
2390 2580 2765 2950 3130 3305 3480 3675 3870 4060 4250 40
2175 2345 2515 2680 2845 3010 3165 3345 3520 3695 3870 50
1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 Speed
440/80 R28 IND 156A8 TL - R8000 Utility
4725 5185 5615 6025 6485 6935 7370 7795 8270 8740 9200 Stationary
3080 3380 3660 3930 4230 4520 4805 5085 5395 5700 6000 10*
2570 2815 3050 3275 3525 3770 4005 4235 4495 4750 5000 10
460 1420 639 4291 W14L W15L
2140 2345 2540 2725 2935 3135 3335 3525 3740 3955 4160 30
2055 2255 2445 2620 2820 3015 3205 3390 3595 3800 4000 40
1870 2055 2225 2385 2570 2745 2915 3085 3275 3460 3640 50
* Cyclic Operation (One way distance 150 m)

60
 load and inflation tables
LIGHT INDUSTRIAL APPLICATION

S8000 UTILITY
Max. Load per Tyre Pressure per Tyre
1.5 1.75 2.0 2.25 2.5 2.75 3.0 3.25 3.5 3.75 4.0 Speed
400/80-24 IND (15.5/80-24) 156 A8 TL - S8000 Utility
3740 4105 4505 4890 5265 5630 6035 6435 6830 7215 7600 Stationary
2950 3240 3555 3860 4155 4445 4765 5080 5390 5695 6000 10*
2460 2700 2960 3215 3465 3700 3970 4230 4490 4745 5000 10
404 1275 572 3837 W13 13
2045 2245 2465 2675 2880 3080 3305 3520 3735 3950 4160 30
1965 2160 2370 2575 2770 2960 3175 3385 3595 3795 4000 40
1790 1965 2155 2345 2520 2695 2890 3080 3270 3455 3640 50

RADIAL ALL TRACTION UTILITY (RATU)

Max. Load per Tyre Pressure per Tyre
1.0 1.2 1.4 1.6 1.8 2.0 Speed
19.5 LR 24 146 A8 143 B TL - RATU 3910 4485 5155 5750 6270 6900 Stationary
2550 2925 3360 3750 4090 4500 10*
1770 2030 2330 2600 2835 3120 30
490 1311 579 3900 W16L W15L
1700 1950 2240 2500 2725 3000 40
1550 1775 2040 2275 2480 2730 50
“L” in tyre size designates low profile tyre. * cyclic operation (One way distance 150 meter).

ALL TRACTION UTILITY (ATU)

Max. Load per Tyre Pressure per Tyre
2.5 2.8 3.0 3.1 3.5 3.6 3.75 Speed
10.5 / 80 – 18 10 PR TL - ATU 4820 0**
3145 10*
276 920 421 2735 9.00 9
2095 40
W9
1905 50
12.0 / 12.5 – 18 8 PR TL - ATU 4685 0**
3055 10*
289 953 431 2815 9 11 2035 40
1850 50
12.0/12.5 – 18 12 PR TL - ATU 5535 0**
3610 10*
289 953 431 2815 9 11 2405 40
2185 50
10 / 10.5 – 20 10 PR TT - ATU 5095 0**
3325 10*
277 986 452 2935 9 - 2215 40
2015 50
12.5 - 20 10 PR TL - ATU 5385 0**
3510 10*
323 1016 465 3020 11 12 2340 40
2125 50
12.4 – 24 12 PR TT - ATU 5360 0**
3495 10*
307 1138 536 3445 W11 W9
2330 40
W10
50
* Cyclic Application (One way distance 600 m) - ** Stationary

61
 load and
inflation tables
LIGHT INDUSTRIAL APPLICATION

ALL TRACTION UTILITY (ATU)

Max. Load per Tyre Pressure per Tyre
2.5 2.8 3.0 3.1 3.5 3.6 3.75 Speed
14.9 – 24 12PR TL - ATU 6670 0**
4350 10*
378 1242 564 3683 W13 W12
2900 40

Max. Load per Tyre Pressure per Tyre

2.1 2.2 2.3 2.5 2.8 2.9 3.0 Speed
16.9 – 24 10 PR TL - ATU 6670 0**
4350 10*
429 1318 584 3861 W15L W14L
2900 40
17.5 L – 24 10 PR TL - ATU 6440 0**
4200 10*
445 1242 564 3683 W15L W14L
2800 40
18.4 – 24 12 PR TL - ATU 8625 0**
5625 10*
467 1374 610 4089 W16L W15L
3750 40
19.5 L – 24 12 PR TL - ATU 7935 0**
5175 10*
495 1308 584 3835 W16L DW16L
3450 40
14.9 – 28 8 PR TT - ATU 5590 0**
3645 10*
378 1344 615 3988 W13 W12
2430 40
16.9 – 28 10 PR TT - ATU 7120 0**
4645 10*
430 1428 643 4205 W15L W14L
3095 40
16.9 – 28 14 PR TT - ATU 8350 0**
5440 10*
430 1428 643 4205 W15L W14L
3625 40

18.4 – 28 12 PR TL - ATU 9200 0**

6000 10*
467 1476 660 4394 W16L W15L
4000 40

16.9 – 30 10 PR TT - ATU 7360 0**

4800 10*
419 1484 672 4385 W15L W14L
3200 40

16.9 – 30 14 PR TT - ATU 9055 0**

5905 10*
419 1484 672 4385 W15L W14L
3935 40
* Cyclic Application (One way distance 600 m) - ** Stationary
“L” in tyre size designates low profile tyre.

62
 load and inflation tables
LIGHT INDUSTRIAL APPLICATION

SKID STEER APPLICATION (NHS)

ST DUPLEX

Max. Load per Tyre Pressure per Tyre

2.1 3.1 3.4 3.8 4.1 4.5 5.9 6.9 Speed
10 - 16.5 6 PR TL - ST Duplex 1590 10
264 795 351 2311 8.25 (15°) 1385 15
12 - 16.5 8 PR TL - ST Duplex 2180 10
315 826 381 2489 9.75 (15°) 1900 15
14 - 17.5 10 PR TL - ST Duplex 3105 10
351 935 411 2718 10.50 (15°) 2705 15
15 - 19.5 12 PR TL - ST Duplex 4170 10
399 1036 483 3099 11.75 (15°) 3630 15
15 - 22.5 16 PR TL - ST Duplex 5580 10
396 1085 493 3251 11.75 (15°) 4855 15
18 - 22.5 16 PR TL - ST Duplex 6490 10
444 1166 546 3556 14.00 5650 15
NHS : Not for Highway Service.

DURAFORCE DT
Max. Load per Tyre Pressure per Tyre
1.4 1.7 2.1 2.4 2.8 3.1 3.4 3.8 4.1 4.5 Speed
215/70-15 NHS (27X8.50-15) 8 PR TL - DuraForce DT
690 790 880 950 1025 1125 1185 1260 1305 10
213 678 307 2007 7.00
605 690 770 830 895 980 1035 1100 1140 15
260/65-15 NHS (27X10.50-15) 8 PR TL - DuraForce DT
730 840 950 1025 1090 1185 1260 1340 1415 10
259 691 312 2032 8.00
640 735 830 895 950 1035 1100 1170 1235 15
390/60-15 NHS (31X15.50-15) 8 PR TL - DuraForce DT
1225 1380 1540 1680 1825 1980 10
391 792 361 2388 13.00
1070 1205 1340 1465 1590 1725 15
265/70-16.5 NHS (10-16.5) 8 PR TL - DuraForce DT
1250 1370 1480 1590 1685 1785 1880 10
254 772 345 2286 8.25
1090 1195 1290 1385 1470 1555 1640 15
305/70-16.5 NHS (12-16.5) 10 PR TL - DuraForce DT
1615 1770 1915 2050 2180 2305 2420 2540 10
312 820 373 2464 9.75
1410 1540 1670 1785 1900 2010 2110 2210 15
395/55-16.5 NHS (33x15.50-16.5) 12 PR TL - DuraForce DT
2065 2260 2445 2620 2785 2945 3100 10
394 838 376 2464 12.00
1800 1970 2130 2280 2425 2565 2700 15
NHS : Not for Highway Service.

63
 notes

64
AGRICULTURAL
TYRES
Forestry Tyres
 FORESTRY
TYRES

Forestry Special CRC (Cut resistant Construction)

• Extra-rugged tyre tread:
FORESTRY SPECIAL
1- Deep, wide lugs (+25% compared to an agricultural tyre). 1 2

2- Thick cut-resistant rubber (+42% compared to an agricultural tyre).

3- Two steel-cord plies.
4- Heavy duty deflector strip to prevent ingress of foreign matter. 3
5- Nylon cord body for impact protection and moisture resistance. 6 4
6- Thick sidewall and tread rubber for shock and cut resistance.
5

• New CRC:
• Benefits of CRC compared to normal construction :
- 9% increase in body strength
- 20% more rubber in the base gauge
- 20% more rubber in the sidewalls
- Improved cut-resistant rubber compound

66
 FORESTRY
TYRES

Forestry Environmental Lug (Forestry EL)

600/55 - 26.5 700/50 - 26.5

Forestry Traction Lug (Forestry TL)

For logging service on forwarders and harvesters:
- 23° tread bar angle for excellent traction.
- High Ply Rating construction.
- Steel tread plies and cut resistant tread and sidewall compounds for
protection from cuts and punctures.

67
 load and
inflation tables
FORESTRY SPECIAL CRC
CUT RESISTANT CONSTRUCTION

Max. Load per Tyre Pressure per Tyre

1.4 1.7 2.1 2.4 Speed
18.4 – 26 10 PR TT - Forestry CRC - 3120 3600 10*
467 1445 665 4343 DW16A W15L 2240 2575 30
23.1 – 26 10 PR TT - Forestry CRC - 4540 10*
587 1613 726 4775 DW20A - 3250 30
23.1 – 26 14 PR TT - Forestry CRC - 4540 5260 5760 10*
587 1613 726 4775 DW20A - 3250 3750 4125 30
28 L – 26 14 PR TL - Forestry CRC - 5260 5940 10*
714 1638 742 4877 DW25A - 3750 4250 30
28 L – 26 16 PR TL - Forestry CRC - 5260 5940 6500 10*
714 1638 742 4877 DW25A - 3750 4250 4625 30
16.9 – 30 10 PR TT - Forestry CRC - 2790 3220 3600 10*
429 1504 693 4521 DW15A DW14A 2000 2300 2575 30
24.5 – 32 16 PR TT - Forestry CRC - 5580 6300 7000 10*
622 1801 826 5309 DW21A DW20A 4000 4500 5000 30
30.5 L – 32 16 PR TL - Forestry CRC - 6650 7450 10*
775 1880 843 5563 DH27 DW27A 4750 5300 30
30.5 L – 32 18 PR TL - Forestry CRC - 6650 7450 8400 10*
775 1880 843 5563 DH27 DW27A 4750 5300 6000 30
DH 35.5 L – 32 16 PR TT - Forestry CRC - 8850 10*
902 2012 904 5969 DH31 - 6300 30
18.4 – 34 10 PR TT - Forestry CRC - 3600 4060 10*
467 1656 777 5029 DW16A W15L 2575 2900 30
(1) CRC Severe Service
* For use on Cable or Grabble Skidders.
“L” in tyre size designates low profile tyre.

For transport service and operations which do not require sustained high torque, the load limits shows at below tabel
at various speeds apply:

Maximum % change in loads Changes in

Speed (km/h) from 30 km/h load Infl. Pressure
40 - 10 % None
30 Same as above table None
25 + 10 % None
15 + 20 % None
Stationary + 170 % 0.35 bar

68
 load and
inflation tables

FORESTRY ENVIRONMENTAL LUG (FORESTRY EL)

Max. Load per Tyre Pressure per Tyre
1.7 2.1 2.4 2.8 2.1 3.1 3.8 4.1 Speed
600/55 B 26.5 20 PR TL - Forestry EL 3540 3950 4425 4740 5135 5455 10
2510 2800 3140 3360 3640 3865 30
599 1341 589 4039 20.00(15°)
2240 2500 2800 3000 3250 3450 50
700 / 50 B 26.5 20 PR TL - Forestry EL 3730 4070 4585 4860 5295 5610 5925 6125 10
2645 2885 3250 3445 3755 3980 4200 4340 30
701 1341 589 4039 24.00(15°)
2360 2575 2900 3075 3350 3550 3750 3875 50

For operations using tracks around bogie axle tyres add 0.4 bar to inflation pressures listed above.
For operations at other speeds, the above loads may be changed with no change in inflation pressure as shown in
below table.

Maximum % change in loads Changes in

Speed (km/h) from 30 km/h load Infl. Pressure
50 Same as above table None
30 + 12 % None
15 + 32 % None
10 + 58 % None
Creep + 100 % None
Stationary + 165 % None

FORESTRY TRACTION LUG (FORESTRY TL)

Max. Load per Tyre Pressure per Tyre
1.0 1.2 1.5 1.7 2.0 2.4 Speed
600/65 B 34 14 PR TL - Forestry TL - 3595 3990 4550 4895 5425 10
599 1643 765 4953 DW20A 2565 2850 3250 3495 3875 30
700/55 B 34 14 PR TL - Forestry TL - 4140 4600 5245 6125 10
696 1643 765 4953 DW24A 2955 3285 3745 4375 30

For operations at other speeds the factors in below chart apply to the loads and inflation pressures in above table.

Maximum % change in loads Changes in

Speed (km/h) from 30 km/h load Infl. Pressure
30 Same as above table None
25 + 10 % None
15 + 20 % None
10 + 40 % + 0.35 bar
Stationary + 170 % + 0.35 bar

69
 gEnEral
information
WARNING
& SAFETY PRECAUTIONS

The following diagram shows how beads of a 16” in the customer’s literature or molded into the tyre
tyre will not seat on a 16.5” rim. The beads cannot be sidewall.
forced out against the rims flanges by using more air
• Failure to comply with these procedures may result
pressure because this will break the beads and the
in faulty positionning of the tyre and/or rim parts and
tyre will explode with force sufficient to cause serious
cause the assembly to burst with explosive force,
injury or death.
sufficient to cause serious physical injury or death.
Never mount or use damaged tyres or rims.
16”
TYRE • Reinflation of any type of tyre/rim assembly that has
BEAD been operated in a run-flat or underinflated condi-
tion (80% or less of recommended pressure), can
RIM FLANGE 16.5” RIM
result in serious injury or death. The tyre may be
damaged on the inside and can explode while you
are adding air. The rim parts may be worn, damaged
or disloged and can explosively separate.
To obtain optimum tyre performance, use rims with
approved contours. Do not use a rim wider or narro- • NEVER rework, weld, heat, or braze the
wer than recommended. The use of non-approved tyre/wheel/rim. Heating the rim of a tyre/wheel/rim
rim contour may adversely affect tyre life and perfor- assembly can cause a tyre to explode, causing
mance. serious injury or death.
Radial tyres may use the same rim contour as the • NEVER hammer, strike or pry on any type of
bias tyres they replace. Howerer, it is necessary to tyre/rim assembly while the tyre contains inflation
check with the rim manufacturer to assure that the rim pressure. Do not attempt to seat any part while the
on the vehicle are appropriate for use with radial tyre contains any inflation pressure. This could
tyres. result in serious injury or death.
Rim dimensions are standardized by the ETRO
Inc. for size and contour only, and particular tyre and
rim combinations are designated to assure proper
mounting and fit of the tyre to the rim. The load and
cold inflation pressure imposed on the rim and wheel Stay out of the tra-
must not exceed the rim and wheels manufacturer’s jectory asdicated
recommendations even though the tyre may be by shaded area.
approved for a higher load or inflation. Rims and
wheels may be identified (stamped) with a maximum Note : Under some
cold inflation rating. For rims and wheels not so iden- circumstances, the Figure 1 Figure 2
tified or for service conditions exceeding the rated trajectory may TRAJECTORY
capacities, consult the rim and wheel manufacturers deviate from its
to determine rim and wheel capacities for the inten- expected path.
ded service. Always use a safety
cage or other restrai-
TYRE DEMOUNTING AND MOUNTING SAFETY ning device in com-
PRECAUTIONS pliance with OSHA
regulations.
• Tyre changing can be dangerous, and should be
done by trained personnel using proper tools and
Figure 3
procedures. Before servicing tyres, always read and
understand any manufacturer’s warning contained
70
 general information
WARNING & SAFETY PRECAUTIONS

GENERAL SAFETY PRECAUTIONS 11. ALWAYS use new tubes in new tyres.
12. ALWAYS use radial tubes with tube-type radial
1. NEVER reinflate a tyre that has been operated in a
tyres.
run-flat or underinflated condition (80% or less of
recommended pressure). Demount and inspect all 13. NEVER use a tube in a casing larger or smaller
tyres and rim parts before reinflating. than that for which the tube was designed by the
manufacturer.
2. ALWAYS use specialized tools as recommended
by tyre suppliers for mounting and demounting of 14. ALWAYS check to be sure tube is clean before
tyres. installing in tyre.
3. BEFORE loosening any nuts or clamps that attach 15. ALWAYS lubricate with only approved tyre moun-
a multipiece rim assembly to a vehicle, always ting lubricant or mild vegetable oil soap solution.
completely deflate the tyre (both tyres of a dual Never use anti-freeze, silicones or petroleum-
assembly) by taking out the valve core(s). Never base lubricants. This will damage the tyre.
attempt to demount a tyre from a rim unless you 16. ALWAYS inspect valve cores for proper air reten-
are sure that the tyre is completely deflated. Failure tion. Replace damaged or leaky cores.
to follow this practice can cause the assembly to
burst with force sufficient to cause serious injury or 17. ALWAYS inflate tyre to tyre manufacturer’s recom-
death. mended cold inflation pressure for the tyre’s
intended service.
4. NEVER use any rim part that is bent, pitted from
corrosion, cracked or worn. These are unservicea- 18. When inflating a tyre off a vehicle, use a safety
ble parts and must be destroyed so that they can- cage or other restraining device, and an extension
not be used. Remove rust, dirt or foreign material hose with in-line air gauge and clip-on air chuck,
from rim parts. which allows the operator to stand clear of the
trajectory.
5. NEVER use a rim part unless you can positively
identify it from the manufacturer’s stamped mar- 19. For tube-type tyres, inflate to service pressure
kings. If you cannot identify a part, it must be des- without the valve core installed and then comple-
troyed. tely deflate the tyre to prevent wrinkles in the
tube. Insert the valve core and reinflate the tyre to
6. ALWAYS inspect inside of tyre for loose cords, recommended service pressure as specified for
cuts, penetrating objects or other casing damage. the tyre and/or rim.
Repairable damage must be repaired, before pla-
cing tyre back into service. TYRES WITH UNRE- 20. ALWAYS use sealing valve caps to prevent loss of
PAIRABLE DAMAGE SHOULD BE DESTROYED. air or fluid.
7. NEVER substitue an inner tube for a permissible or 21. ALWAYS check to be sure tyre is centered on rim
non-permissible repair. before inflating.
8. ALWAYS replace a tyre with one having the same
rim diameter designation and suffix letters.
9. ALWAYS inspect inside of the tyre and remove dirt,
liquids, or other foreign material before mounting.
10. NEVER install tubes that have buckled or creased.

71
 gEnEral
information
WARNING
& SAFETY PRECAUTIONS
MOUNTING, INFLATING AND DISMOUNTING GUIDELINES FOR
AGRICULTURAL TYRES
MOUNTING
STEP #1: FIGURE A Figure A STEP #2 : FIGURE B Figure B

*Lubricate both beads and Using tyre iron or mounting

rim. machine, pry the first bead
over the rim flange. Start
Position tyre so first beads away from the valve.
is in wheel well 180 Continue to pry the first
degrees from valve. bead over the rim flange,
working your way toward
the valve.

Step #3: FIGURE C Figure C INFLATING Figure D

Position tyre so both beads STEP #4: FIGURE D

are in wheel well 180
degrees from valve. Centre tyre on wheel
before inflation.
Using tyre iron or mounting
machine pry the second Apply remote air chuck to
bead aver the rim flange, the valve.
working your way toward
the valve. Insert assembly in a small
Continue to pry the second cage, or other device to
bead over the rim flange, working your way toward the valve. protect personnel.

Finish prying the second bead over the rim at the valve. Apply air to the tyre and wheel assembly.

STEP #5 : FIGURE E Figure E

GENERAL INFORMATION
Inflate tyre to seat the
beads. 1. Tyre mounting and dismounting can be dangerous, use
only trained personnel.
Do not inflate over 35 psi 2. Use a non-metallic hammer to mount and dismount tyre.
to seat beads. 3. Use proper tools and equipment.
If beads do not seat at 35 4. Be sure all components are clean and dry.
psi, reposition tyre on 5. If a tube is to be used, use only a new tube in a new tyre.
wheel and relubricate. 6. Lubricate tyre beads, rim bead seat, and innertube with a
vegetable based lubricant. Do not use petroleum based
Repeat inflation proce- or silicon lubricants.
dure. 7. To prevent rim to tyre slip, the lubricant must dry, there-
Set to proper inflation pressure. fore dilute the lubricant with water 50 %.
8. Mount the tyre with the pry notch 90 degrees from the
valve.
9. Mount and dismount tyres on the side of the rim closest
to the drop center.
10. When prying the bead over the rim flange, use small
increments.
11. If a tube is used, double inflate to allow the tube to repo-
sition itself.
72
 general information
WARNING & SAFETY PRECAUTIONS

DISMOUNTING
STEP #1: FIGURE F Figure F STEP #2: FIGURE G Figure G

Deflate the tyre completely. Push bead off the bead

seat off the wheel with a
Keep open flame away
“bead breaker”.
from air evacuating the tyre
(no smoking, no flames) Lubricate both beads and
rim flange rearest the
Lubricate the pry notch
wheel well.
with approved lubricant.

STEP #3 : FIGURE H Figure H STEP #4 : FIGURE I Figure I

Position the beads in the Taking small increments,

wheel well 180 degrees pry the second bead off
from the valve. the wheel starting at the
valve.
Position an iron or moun-
ting machine at the valve.
Complete dismounting the
Taking small increments, bead away from valve.
pry the first bead of the
wheel.

Notice: Although great care has been taken in producing this manual,
we accept no responsibility for any loss or damage resulting
from undetected errors or misprints which may have occurred.
Due to constant advance of tyre technology, contents of this
data book are subject to change without notice.

73
 gEnEral
information
HYDRO-INFLATION

Hydro-inflation Procedure for Fluid by placing the pump in neutral or check position. If the
Ballast pressure exceeds 20 psi, move the handle to the eva-
cuate position until the pressure is bled back to not less
than 5 psi. After the pressure is lowered, continue to
1- After the beads have been fully seated un the mounting
add fluid. repeat the above steps as often as
procedure, inflate the tyre to 35 psi. Jack up the wheel
necessary.
and rotate the wheel assembly so that the valve is at top
Industry practice is to maintain the fluid level at 75%.
of the rim. Lower the jack until the tyre is slightly deflec-
(Fluid fill should be maintained at a level sufficient to cover
ted.
the valve and keep the rim completely sugmerged.)
2- Connect the assembly to fill the tyre with fluid as shown
Tyre being filled with hydro-inflation equipment:
in the illustration bellow.

Air cushion
chamber
90% fill
Air escape, liquid
rises to this level
75% fill
Liquid coming in
A

B 5 - Replace the core housing in the valve stem by pushing

Supply hose
the handle in until the housing is screwed tightly into the
D valve stem. Then withdraw the handle. Turn the handle
to evacuate and pump all liquid from the hose. Next,
C shut off the pump and unscrew the assembly from the
Vent tube hose valve.
6 - Inflate the tyre to seat the beads, not exceeding 35 psi.
With the valve stem still at the top, bleed the excess fill
down to one to two psi above the recommanded infla-
Attach adapter and unit assem- tion pressure.
bly part “A” to valve stem. Do
7 - Finnally, rotate the tyre and wheel assembly so that the
not use pliers. Also attach sup-
valve is at the bottom of the tyre. Set the final operating
ply hose part “B”. Part “C” is
pressure with the tyre mounted on the tractor and its full
used to remove core housing.
weight on the tyre.
TO REMOVE FILL:
1 - Jack up the tractor until the tyre is slightly deflected.
Rotate the tyre and wheel assembly until the valve is at
the bottom.
In warm climates where calcium 2 - Connect the assembly to the valve stem. Unscrew and
chloride may not be desired, tyres retract the core housing (part “C”) into injector body
can be filled with water only. A with the control handle in the check or neutral position.
pump is not necessary when only Attach the adapter (part “B) to the valve. Remove the
water fill is used. Tyres may be fil- core housing and connect the supply hose to the adap-
led directly by using a valve adap- ter “B”.
ter on a hose. 3 - Start the pump and turn the control handle to the eva-
3 - After the connection (in step 2) is made, bleed the air cuate position. The fluid will be rapidly withdrawn from
pressure down to about 5 psi by moving the control the tyre. Gravity flow may also be used to remove the
handle (part ”C”) to the evacuate position. Five psi fluid.
keeps the beads seated on the rim. When removing fluid from tubeless tyres, be careful not to
4 - When this point is reached, start the pump and move unseat beads until most of fluid has been pumped from the
the control handle to the fill position. Use a hydro-infla- tyre. Consult your tyre supplier for information on hydro-
tion pump to fill the tyre with calcium chloride or non- inflation equipment such as pumps, compressors, air-
damaging anti-freeze solution (consult tube or tyre water conversion hardware parts, etc. Tyre rotated so valve
manufacturer for recommandations). Check the pres- is at bottom with hydro-inflation fluid being removed.
sure in the tyre every few minutes with the pump gauge
74
 general information
HYDRO-INFLATION
Radial and crossply agricultural tyres Radial and crossply agricultural tyres
Tyre volume 75% valve level fill Tyre volume 75% valve level fill
Solution 0.42 kg (CaCl2) / l (Water) Solution 0.42 kg (CaCl2) / l (Water)
Slush free -24°C Solid at -46° Slush free -24°C Solid at -46°
Rim 75% TOTAL Rim 75% TOTAL
(inches) (dm3) (dm3) Water Ca cl2 Total (inches) (dm3) (dm3) Water Ca cl2 Total
(Litres) (kg) (kg) (Litres) (kg) (kg)
6.50-20 5 32 42 27 11 39 480/65R24 15 224 298 192 81 274
7.50-20 5.5 44 58 37 16 53 540/65R24 16 278 371 239 101 341
9.5-20 8 57 76 49 21 70 250/85R28 8 72 96 62 26 88
9.5-24 8 65 86 55 23 79 280/85R28 10 102 136 88 37 125
11.2-24 10 91 121 78 33 111 320/85R28 11 133 177 114 48 162
12.4-24 11 113 151 97 41 139 340/85R28 12 163 217 140 59 199
13.6-24 12 144 192 124 52 176 360/70R28 11 136 181 117 49 166
14.9-24 13 178 237 153 65 218 380/70R28 12 163 217 140 59 199
16.9-24 15 231 308 199 84 283 380/85R28 13 201 268 173 73 246
14.9-26 13 188 251 162 69 230 420/70R28 13 206 274 177 75 252
16.9-26 15 246 328 212 90 301 420/85R28 15 261 348 224 95 319
18.4-26 16 299 399 257 109 366 440/65R28 14 206 275 177 75 252
23.1-26 20 485 646 417 176 593 440/80-28 14 272 363 234 99 333
28L 26 25 594 792 511 216 727 480/70R28 15 275 367 237 100 337
9.5-28 8 72 96 62 26 88 480/65R28 15 248 330 213 90 303
11.2-28 10 102 136 88 37 125 540/65R28 16 311 414 267 113 380
12.4-28 11 133 177 114 48 162 600/65R28 18 405 540 348 147 496
13.6-28 12 163 217 140 59 199 420/85R30 15 276 368 237 100 338
14.9-28 13 201 268 173 73 246 480/70R30 15 290 386 249 105 354
16.9-28 15 261 348 224 95 319 540/65R30 16 338 451 291 123 414
14.9-30 13 216 288 186 79 264 600/70R30 20 450 600 387 164 551
16.9-30 15 276 368 237 100 338 650/75R32 21 596 795 513 217 730
18.4-30 16 337 449 290 123 412 800/65R32 27 848 1131 729 309 1038
23.1-30 20 579 772 498 211 709 290/95R34 10 125 167 108 46 153
24.5-32 21 644 858 553 234 788 320/85R34 10 133 177 114 48 162
16.9-34 15 308 411 265 112 377 385/85R34 13 239 318 205 87 292
18.4-34 16 362 482 311 132 442 420/85R34 15 308 411 265 112 377
12.4-36 11 167 222 143 61 204 460/85R34 16 362 482 311 132 442
13.6-36 12 205 273 176 75 251 480/70R34 15 307 409 264 112 375
13.6-38 12 216 288 186 79 264 520/70R34 16 361 481 310 131 442
15.5-38 14 250 333 215 91 306 540/65R34 16 382 509 328 139 467
16.9-38 15 341 454 293 124 417 600/65R34 18 469 625 403 171 574
18.4-38 16 386 515 332 141 473 710/75R34 23 875 1166 752 318 1070
20.8-38 18 530 707 456 193 649 320/85R38 10 144 192 124 52 176
18.4-42 16 435 580 374 158 532 420/85R38 15 341 454 293 124 417
20.8-42 18 560 747 482 204 686 460/85R38 16 386 515 332 141 473
14.9-46 13 303 404 261 110 371 480/70R38 15 335 446 288 122 409
18.4-46 16 488 651 420 178 598 520/70R38 16 393 524 338 143 481
12.4-54 10 200 267 172 73 245 520/85R38 16 530 707 456 193 649
280/70R20 9 51 68 44 19 63 540/65R38 16 391 521 336 142 478
300/70R20 9 65 86 55 23 79 580/70R38 18 578 770 497 210 707
320/70R20 10 81 108 70 29 99 600/65R38 18 518 691 446 189 634
360/70R20 11 113 151 97 41 139 650/65R38 20 631 841 542 230 772
400/70R20 13 131 175 113 48 161 710/70R38 23 800 1067 688 291 980
250/85R24 8 65 86 55 23 79 800/70R38 25 1079 1438 928 393 1320
280/85R24 10 91 121 78 33 111 850/85R38 23 879 1172 756 321 1077
320/70R24 10 95 127 82 35 117 320/90R42 10 166 221 143 60 203
320/85R24 11 113 151 97 41 139 650/65R42 20 677 903 582 247 829
340/85R24 12 144 192 124 52 176 620/70R42 20 613 817 527 223 750
360/70R24 11 122 162 104 44 149 710/70R42 23 832 1109 715 303 1018
380/70R24 12 146 194 125 53 178 900/50R42 27 875 1166 752 318 1070
380/85R24 13 178 237 153 65 218 320/90R46 10 189 252 163 69 231
400/80R24 13 200 267 172 73 245 380/90R46 12 284 379 244 103 348
420/70R24 13 185 246 159 67 226 520/85R46 16 568 757 488 207 695
420/85R24 15 231 308 199 84 283 230/95R48 8 95 126 81 34 116
440/65R24 14 188 251 162 69 230 320/90R50 10 189 252 163 69 231
460/70R24 15 213 284 183 78 261 320/90R54 10 200 267 172 73 245
480/70R24 15 247 329 212 90 302

75
 general
information

SIZE MARKINGS
Front Tyre Marking Radial (Standard) Tyre Marking
750-16 6 PR 18.4R38 146 A8 143B

ply rating speed symbol for 50 km/h

rim diameter in inches load index at 50 km/h
dash denotes crossply construction speed symbol for 40 km/h
section width in inches load index at 40 km/h
rim diameter in inches
"R" denotes radial construction
Implement Tyre Marking section width in inches

11.5/80-15.3 (special rim diameter used in Europe)

Radial (Metric) Tyre Marking
rim diameter in inches
520/70R38
dash denotes crossply construction
approximate aspect ratio
section width in inches rim diameter in inches
"R" denotes radial construction
approximate aspect ratio
Flotation Tyre Marking section width in mm

66 x 43.00-25 10 PR

ply rating
nominal diameter of the rim in inches
dash denotes crossply construction
section width in inches
approximate overall diameter in inches

SPEED SYMBOLS/LOAD INDEXES

The speed symbol indicates the speed at which the tyre can carry a load corresponding to its load
index under service conditions specified by the tyre manufacturer.

Speed symbols SPEED (km/h) L.I. kg L.I. kg L.I. kg L.I. kg L.I. kg

A1 5 90 600 110 1060 130 1900 150 3350 170 6000

A2 10 91 615 111 1090 131 1950 151 3450 171 6150

92 630 112 1120 132 2000 152 3550 172 6300
A3 15
93 650 113 1150 133 2060 153 3650 173 6500
A4 20
94 670 114 1180 134 2120 154 3750 174 6700
A5 25
95 690 115 1215 135 2180 155 3875 175 6900
A6 30
96 710 116 1250 136 2240 156 4000 176 7100
A7 35 97 730 117 1285 137 2300 157 4125 177 7300
A8 40 98 750 118 1320 138 2360 158 4250 178 7500
B 50 99 775 119 1360 139 2430 159 4375 179 7750
C 60 100 800 120 1400 140 2500 160 4500 180 8000
D 65 101 825 121 1450 141 2575 161 4625 181 8250

E 70 102 850 122 1500 142 2650 162 4750 182 8500
103 875 123 1550 143 2725 163 4875 183 8750
F 80
104 900 124 1600 144 2800 164 5000 184 9000
G 90
105 925 125 1650 145 2900 165 5150 185 9250
106 950 126 1700 146 3000 166 5300 186 9500
107 975 127 1750 147 3075 167 5450 187 9750
108 1000 128 1800 148 3150 168 5600 188 10000
109 1030 129 1850 149 3250 169 5800 189 10300
76
 general information

STANDARD 85 70 65 HIGH FLOTATION ROW CROP ROW CROP

SERIES SERIES SERIES SERIES VOLUME TYRES (Standard) (Metric)
7.50R16 280/70R16
7.50R18 280/70R18
280/70R20
300/70R20
320/70R20
360/70R20
9.5R24 250/85R24
11.2R24 280/85R24 320/70R24
12.4R24 320/85R24 360/70R24
13.6R24 340/85R24 380/70R24 440/65R24 42x25.00-20
14.9R24 380/85R24 420/70R24 480/65R24 17.5LR24
16.9R24 420/85R24 480/70R24 540/65R24 19.5LR24 48x25.00-20
14.9R26
16.9R26 420/85R26
18.4R26
9.5R28 250/85R28
11.2R28 280/85R28 42x25.00-20
12.4R28 320/85R28 360/70R28 480/65R24
17.5LR24
13.6R28 340/85R28 380/70R28 440/65R28 540/65R24 48x25.00-20
19.5LR24
14.9R28 380/85R28 420/70R28 480/65R28 48x31.00-20
16.9R28 420/85R28 480/70R28 540/65R28 800/50-25 320/85R34
14.9R30 380/85R30
16.9R30 420/85R30 480/70R30 540/65R30 600/65R28 54x37.00-25
18.4R30 460/85R30 600/65R28 385/85R34
320/85R38
23.1R30 620/75R30
14.9R34 380/85R34
16.9R34 420/85R34 480/70R34 540/65R34 600/70R30 380/80R38
18.4R34 460/85R34 520/70R34 600/65R34 1050/50R25 320/90R42
66x43.00-25 230/95R48
66x44.00-25
13.6R36
13.6R38 600/70R30
16.9R38 420/85R38 480/70R38 540/65R38 620/75R30 1050/50R25 320/90R42
(23.1R30) 66x43.00-25 230/95R48
67x34.00-25
18.4R38 460/85R38 520/70R38 600/65R38 650/75R32 68x50.00-32 12.4R46 320/90R46
800/65R32
20.8R38 520/85R38 580/70R38 650/65R38 800/65R32 73x44.00-32 14.9R46 380/90R46
420/80R46
320/90R50
18.4R42 480/80R42
20.8R42 620/70R42 650/65R42 710/75R34 76x50.00-32 320/90R54
710/70R38 (1250/45-32) 380/90R50
900/50R42
520/85R46 710/70R42 78x45.00-32 380/90R54
650/85R38 800/70R38
Compared to conventional tyres the equivalent «70 series» tyre: Compared to conventional tyres the equivalent equivalent
- Generally fits the same rim. «65 series» size:
- Carries additional load at the same inflation pressure. - To obtain all of the advantages it is prefered to mount on the
- Provides 20% larger footprint for reduced soil compaction. recommended rim. 77
- Has a similar overall diameter and rolling circumference.
 notes

78
notes

79
 notes

80
 GENERAL INFORMATION
TEST CENTRES

Columbiana Agricultural test Centre in Ohio - U.S.A.

Technical Centre Europe in Rome - Italy.

81
 addresses

AUSTRIA
Bridgestone Austria GmbH
Laxenburgerstraße 252 Tel: 43 1 61 41 32 01
1232 Vienna - Austria Fax: 43 1 61 41 31 00

BELUX
Liersesteenweg 400 Tel: 32 15-281919
2800 MECHELEN Fax: 32 15-281910

CZECH REPUBLIC
Bridgestone Czech Ltd.
Prague City Center
Klimentská 46 Tel: 420-2-2185-6019
110 02 Praha 1 - Czech Republic Fax: 420-2-2185-6022

DENMARK
Bridgestone Danmark A/S.
Sigma, 1 Søften, Tel.: 45 87 64 66 68
8382 Hinnerup, Denmark Fax: 45 87 64 66 66

FINLAND
Bridgestone Finland
Korpivaarantie 1 Tel: 358 0 85 78 61
SF-01450 Vantaa - Finland Fax: 358 0 85 78 62 51

FRANCE
Bridgestone France
Parc d’Activités du Moulin de Massy
23, rue du Saule Trapu Tel: 33 1 69 19 27 00
91882 Massy Cedex - France Fax: 33 1 69 19 27 01

GERMANY
Bridgestone Deutschland GmbH
Du Pont Straße 1 Tel: 49 61 72 40 801
61352 Bad Homburg v.d.H. - Germany Fax: 49 61 72 40 8490

GREECE
ELASTRAK
15, Thivaidos Street, N. Kifissia Tel: +30-210-819 69 20
14564 Athens - Greece Fax: +30-210-807 78 18

HUNGARY
Bridgestone Hungary Ltd. Tel: 36 1 387-9229,
Timár u. 20 387-9398
H-1034 Budapest III - Hungary Fax: 36 1 387-9311

82
 addresses

IRELAND
Bridgestone Ireland
Fingal Bay Business Park Unit 10 Tel: 353 1 841 00 00
Balbriggan - Co. Dublin - Ireland Fax: 353 1 841 52 45
ITALY
Bridgestone Italia S.p.A.
Centro Direzionale Colleoni
Palazzo Taurus - Scala 2
Viale Colleoni 3 Tel: 39 39 656 01 1
20041 Agrate Brianza Milano - Italy Fax: 39 39 68 99 637

NORWAY
Gjerde & Byhring
Jerikoveien 22 Tel: 47 22 30 65 77
1067 Oslo - Norway Fax: 47 22 30 60 93

POLAND
Bridgestone Sales Polska Sp. z.o.o.
èpu 18
Postè Tel.: 48 22 606 18 20
02-672 Warszawa - Poland Fax: 48 22 606 18 22

PORTUGAL
Bridgestone Portuguesa, LDA.
Urbanização do Passil
Lote 96 A Passil Tel.: 351 21 230 7350
2890 - 118 Alcochete - Portugal Fax: 351 21 230 7391

SPAIN
Bridgestone Hispania
C/Fuerteventura 9
Polígono Industrial Norte,
S. Sebastián de los Reyes Tel.: 34 91 623 30 17
28700 Madrid - Spain Fax: 34 91 623 30 44

SWEDEN
Bridgestone Sweden AB
Gärdevägen 5 A Tel: 46 60 55 04 30
852 52 Sundsvall - Sweden Fax: 46 60 56 61 21

SWITZERLAND
Bridgestone Schweiz
Limmatpark
Pfadackerstraße 6 Tel: 41 56 418 71 11
8957 Spreitenbach - Switzerland Fax: 41 56 71 34 68

THE NETHERLANDS
Bridgestone Netherlands Tel: 31 168 385 110
Distriboulevard 15, 4761 RZ MOERDIJK Fax: 31 168 385 111
U.K.
Bridgestone U.K. Ltd.
Bridgestone House
Athena Drive
Tachbrook Park Tel.: 44 1926 488500
Warwick CV 34 6UX - UK Fax: 44 1926 488600
83
 www.firestone-eu.com
Bridgestone Europe NV/SA

Tel.: (+32) 2 714 67 00 - Fax: (+32) 2 714 67 09

Kleine Kloosterstraat 10 - 1932 Zaventem - Belgium
“The information contained in this publication is for guidance purposes only. Whilst every effort has been made in its production, no responsibility can be accepted for any loss or damage
arising from any undetected error. Any data supplied is subject to possible revision following the date of publication.” - Produced - F AGR B GB - 10/2007