JET45 AAS / SYSTEMS MODULES

WARNING: FOR FLIGHT SIMULATION USE ONLY!

Welcome to Jet45 Advanced Avionics Suite v2.0! This document is a complete guide to help
properly set up the hardware aspect of Jet45 AAS v2.0 and the up and coming Jet45 Systems
Interface Modules so that you can take full advantage of all the features of the new software.
Every aspect of the Lear45's avionics suite has been modeled in detail thanks to Jason Hite
at Flight Deck Soft!

01-01-2023 1 V2.19
The pins, plugs and hardware detailed in this document are designed to work exclusively with
the Jet45 Interface Modules powered by the Meduino Mega and Arduino Nano cards for both
the Jet45 Advanced Avionics Suite and the up coming Jet45 Advanced Systems Software. All
pinout assignments listed in this document are hard wired with the exception of the encoder
directions which can be reversed in the Arduino .ini files.

All physical hardware and part numbers are listed in this document! It is highly recommended
to use the listed hardware in order to avoid unfavorable results in your simulation. The
Interface Module Illustrations in this document are designed for quick pin and plug reference.
Below each set of illustrations is a detailed list of the pins and plugs associated with those
modules. You MUST wire your simulator to match the information outlined in this document!

Additionally, there are several “Three Position Toggles” that have an active center position.
The preferred toggle for most three position switches is the ON-OFF-ON single pole. Simply
wire the toggle switch like the one illustrated below (ground in the center) and let the software
do the rest by detecting active high or active low signals!

All Interface modules include a “RESET” plug which consist of a pin for a Reset Button and a
pin for a Remote Status LED. If a module either comes off line or acts erratically, simply reset
the module with the Reset Button to resolve the issue. The normal status indication of the
LED is a repeating “heartbeat” flash. If the LED indicates solid or extinguished, reset is
required. The Reset Button and Remote Status LEDs can be remotely mounted to a location
of your choice.

01-01-2023 2 V2.19
Several of our interface modules use the Meduino Mega2560 R3 Pro Mini which functions
exactly the same way as an Arduino Mega 2560 interface card. These cards are desirable
because of their small footprint and female headers already soldered to the backside of the
cards.

A few interface modules require either one or two 16 Channel 12-bit PWM Servo Motor
Drivers for the LEDs and servos. There are several available options to choose from,
however, make sure you select a PWM that is not assembled. The modules in this document
require that the pin headers be mounted on the back side of the PWMs. Soldering is
required!

NOTE: Within the following information, a blue “ *“ depicts switch and action changes from
Lear45 Sim v1.0 to v2.0. Legends in a set of [ SAMPLE ] depicts guarded switches. Pin
assignments are color coded to match wire color. Typical wiring colors:

• BLACK = COMMON or GROUND

• RED = SIGNAL LINES or POWER
• GREEN = LED SIGNALS or SERVOS

The PCB Modules are available in four packages:

• PCB Only (Includes only the PCB boards)

• PCB Kit (Includes PCB boards and components)
• PCB Solder (Includes components soldered to PCB boards)
• PCB Plug&Play (Includes PCB Solder pkg, Arduino and PWM Modules)

CAUTION: If starting from PCB Only or PCB Kit you must use headers for the Arduino Nano,
Mega and PWM modules! It is critical to be able to remove these modules in case of repair or
trouble shooting.

Additionally, if starting with the PCB Only or PCB Kit, you must solder the smallest
components first, as an example the tiny 1206 SMD resistors. Take a few minutes to look
over all the components and develop a solid soldering plan!

01-01-2023 3 V2.19
 JET45 ADVANCED AVIONICS SUITE
S3 P3

Project 45
L45-002

DU4 AV FAN DU3 AV FAN SERVICE PANEL DU2 AV FAN DU1 AV FAN
AVIONICS COOLING FANS
DU4 FAN DU3 FAN DU2 FAN DU1 FAN

RESERVED SPACE R FLOOD

AVIONICS BAY LIGHTING
R AVIONICS L AVIONICS L FLOOD
RESERVED SPACE

RIGHT ACP MODULE DU4 / EFIS2 MODULE 13 GND RST

DU3 / REV2 MODULE 13 GND RST
RMU2 MODULE RMU1 / CDR MODULE 28 28 26 DU1 / EFIS1 MODULE 29 29 GND FGC MODULE RESET GND 5 2 GND GND
LEFT ACP MODULE
RST RST GND 5 2 GND GND
31 30 13 GND RST
25 27 27 A GND 3 B

GN D

S DA
RS T
GND

S CL
RESET 13 GND RST

3V3
13 GND RST RESET 13 GND RST 31 30 25 GND
9 9 7 7 13 GNDRST GND 3V3SCLSDA RST 27 27 29 29
A RESET 13 GND RST 11 11 23 23 A 13 13 4 9 7
GND 3 4 9 7
RESET RESET 23 23 11 11 11 11 9 9
RESET CDR OLED 23 23 25 25 7 7 9 9 RESET
WX RADAR MODULE RST RST RST RST A 27 27 25 25 25 25 23 23 9 9 11 11
DU2 / REV1 MODULE 13 13
GND
13
GND
13
USB GND
13
GND
13
USB 31 31 29 29 A 29 29 27 27
GND GND GND
47 47 GND GND USB USB GND
RST
GND
RST

RST
GND GND GND GND 30 30 31 31 34 34 32 32 GND 50 50 48 48
RST
GND GND USB 26 26 28 28 38 38 36 36 8 7 7
8 53 53 52 52 B
13
13 53 53 51 51 44 44 40 40 18 18 19 19 A 28 28 GND GND
RESET
B 50 50 52 52 GND GNDGND GND 47 47 46 46 B 16 16 17 17 31 31 30 30
10 14 16 GND 5V A6 2 4 6 8 12 26 22 25 29 30 49 53 50 47 44 A14 A10 A6 A2 A5 A9 A13 5V 7 11 25 29 31 28 53 50 47 46 40 36 GND 32 33 37 GND GND 48 48 48 48 50 50 50 50 48 48 14 14 15 15 11 10 25 29 GND 30 53 50 47 44 40 36 32 66 62 58 GND 13 11 9 7 GND 5 3 1 26 22 25 29 30 49 53 50 47 44 A14 A10 A6 A2 A5 A9 A13 5V

10 14 16 GND 5V A6 2 4 6 8 12 26 22 25 29 30 49 53 50 47 44 A14 A10 A6 A2 A5 A9 A13 5V 7 11 25 29 31 28 53 50 47 46 40 36 GND 32 33 37 46 46 47 47 GND GND GND GND 36 38 38 11 10 25 29 GND 30 53 50 47 44 40 36 32 66 62 58 GND 13 11 9 7 GND 5 3 1 26 22 25 29 30 49 53 50 47 44 A14 A10 A6 A2 A5 A9 A13 5V
B
36
9 15 17 GND GND A7 GND 3 5 7 11 24 23 27 31 GND GND 51 52 48 46 A12 A8 A4 A3 A7 A11 A15GND 9 23 27 GND 30 GND 52 48 GND GND 44 38 GND 34 35 39 GNDGND GND GND 40 40 44 44 12 12 11 11 40 40 44 44 C GND 12 23 27 GND 31 28 52 48 46 GND 38 34 64 60 56 GND 12 10 8 6 GND 4 2 GND 24 23 27 31 GND GND 51 52 48 46 A12 A8 A4 A3 A7 A11 A15GND
9 15 17 GND GND A7 GND 3 5 7 11 23 27 31 GND GND 51 52 48 46 A12 A8 A4 A3 A7 A11 A15 23 27 GND 30 GND 52 48 GND GND 44 38 GND 34 35 47 47 46 46 36 38 38 69 67 67 6 6 5 5 GND 12 23 27 GND 31 28 52 48 46 GND 38 34 64 60 56 GND 12 10 8 6 GND 4 2 GND 23 27 31 GND GND 51 52 48 46 A12 A8 A4 A3 A7 A11 A15

4 3 3 B
36 69 46
46 GND GND
A JET45 AAS v2.18 B C A JET45 SYS v2.18 B C A JET45 AAS v2.18 B C D C 44 44 45 45 32 32 34 34 65 65 63 63 4 C JET45 AAS v2.18 D E F G H A JET45 SYS v2.18 B C
2
33 32 32 USB USB 61 61 60 60 2 GND GND 37 37 39 39
JET45 AAS v2.18 JET45 AAS v2.18
62 62 64 64
C 33 33 35 35
66 66 68 68 USB
RST GND 13 RESET 32 32 34 34 D
RST GND 13 USB
USB 33 33 GND GND GND GND
JET45 AAS v2.18 JET45 AAS v2.18 JET45 AAS v2.18

RELAY MODULE APU DISPLAY HF RADIO MODULE

RESET 5V 5V
RST RST DIN DIN
GND GND USB USB USB LOAD LOAD
13
13 CLK CLK
GND GND
SPIDSP
RESET 18 A6 5V 9 7 GND GND 3 5

2 4 6 8 10 12 14 16 RELAYS 15 13 11 9 7 5 3 1
PWM A CWP MODULE PWM B RESET 11 10 9 RST RST 18 A6 5V 9 7 GND GND 3 5
USB 11 10 9 GND GND
2 3 4 5 6 7 8 9 GND GND 12 14 15 16 17 18 11 10 RIGHT PANELS MODULE LEFT PANELS MODULE PED PANELS MODULE RST GND 13
13 A5 A7 GND 8 6 GND GND 2 4
A B C D E F A B C D E F G A B C D E F G 2 3 4 5 6 7 8 13
2 3 4 5 6 7 8 9 GND GND 12 14 15 16 17 18 11 10 RST GND 13 2 3 4 5 6 7 8 A5 A7 GND 8 6 GND GND 2 4

Q
A1 A3 A5 A7 A9 GND GND 5V GND GND A13 B0 B2 B4 GND B6 B8 B10 B12 B14 GND A1 A3 GND 5V GND GND A10 A12 GND GND GND A14 B0 B2 B4 B6 GND B8 B10 B12 B14 GND A2 A4 A7 A9 GND 5V GND GND GND A14 GND B1 B3 B5 GND B8 B10 B12 B14
A B JET45 SYS v2.18 RST RST A1 A3 A5 A7 A9 GND GND 5V GND GND A13 B0 B2 B4 GND B6 B8 B10 B12 B14 GND RST RST A1 A3 GND 5V GND GND A10 A12 GND GND GND A14 B0 B2 B4 B6 GND B8 B10 B12 B14 RST RST GND A2 A4 A7 A9 GND 5V GND GND GND A14 GND B1 B3 B5 GND B8 B10 B12 B14 JET45 SYS v2.18 JET45 SYS v2.18 A B C
GND GND GND GND GND GND
13
13 A0 A2 A4 A6 A8 GND A10 A11 GND A12 A14 A15 B1 B3 B5 GND B7 B9 B11 B13 B15 13
13 A0 A2 A4 A7 GND A8 A9 A11 GND A13 GND A15 B1 B3 B5 B7 GND B9 B11 B13 B15 13
13 A1 A3 A5 A6 A8 A10 A11 A12 A13 GND A15 B0 B2 B4 B6 B7 B9 B11 B13 B15
RESET A0 A2 A4 A6 A8 GND A10 A11 GND A12 A14 A15 B1 B3 B5 GND B7 B9 B11 B13 B15 RESET A0 A2 A4 A7 GND A8 A9 A11 GND A13 GND A15 B1 B3 B5 B7 GND B9 B11 B13 B15 RESET A1 A3 A5 A6 A8 A10 A11 A12 A13 GND A15 B0 B2 B4 B6 B7 B9 B11 B13 B15

RIGHT LCU MODULE LEFT LCU MODULE PEDESTAL LCU MODULE

1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12

GND GND GND GND GND GND GND GND GND GND GND GND RESET GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND
5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V RST GND 13 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V
RST GND 13 PRES R2 0 PWM A PWM B PWMA PWM B PWMA PWM B
Use 0ohm resistor s for pads R2

A15 A13 A11 A9 GND B13 B11 B9 B7 GND GND B4 B2 B0

RST RST R3 0

6 2
and R3 unless otherwise stated.
5 9 12 8 25 27 31 28 24 51 52 48 45 46 42 40 36 32 68 64 60 56 35 55 59 63 67 37 5 3 7 11 10 6 23 27 31 28 24 43 51 52 48 47 46 42 38 34 35 33 66 62 58 54 57 61 37 65 69 2 4 18 5 7 11 15 10 23 27 31 28 26 49 53 50 45 47 44 40 36 32 68 66 62 58 54 57 61 63 67 69
SDA SDA
A15 A13 A11 A9 GND B13 B11 B9 B7 GND GND B4 B2 B0 SCL SCL 6 2 5 9 12 8 25 27 31 28 24 51 52 48 45 46 42 40 36 32 68 64 60 56 35 55 59 63 67 37 5 3 7 11 10 6 23 27 31 28 24 43 51 52 48 47 46 42 38 34 35 33 66 62 58 54 57 61 37 65 69 2 4 18 5 7 11 15 10 23 27 31 28 26 49 53 50 45 47 44 40 36 32 68 66 62 58 54 57 61 63 67 69
5V 5V
1 2 3 4 5 6 7 8 9 10 11 12 A14 A12 A10 A8 GND B12 B10 B8 B6 GND GND B5 B3 B1 GND GND GND 4 3 7 11 10 23 GND 29 30 26 49 53 50 47 44 GND 38 34 33 66 62 58 54 GND 57 61 65 69 GND GND 4 GND 9 12 GND 8 25 29 30 26 GND 49 53 50 45 44 40 36 32 GND 68 64 60 56 55 59 63 GND 67 GND 6 GND GND 3 9 GND GND 12 8 25 29 30 GND 24 51 52 48 46 42 38 34 33 GND 64 60 56 55 59 GND 65 GND GND 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12
430 430 430
A14 A12 A10 A8 GND B12 B10 B8 B6 GND GND B5 B3 B1 OLED GND 4 3 7 11 10 23 GND 29 30 26 49 53 50 47 44 GND 38 34 33 66 62 58 54 GND 57 61 65 69 GND GND 4 GND 9 12 GND 8 25 29 30 26 GND 49 53 50 45 44 40 36 32 GND 68 64 60 56 55 59 63 GND 67 GND GND GND 3 9 GND GND 12 8 25 29 30 GND 24 51 52 48 46 42 38 34 33 GND 64 60 56 55 59 GND 65 GND
R1 4 30
JET45 SYS v2.18
D1 GND 5V
2A JET45 AAS v2.18 A B C JET45 SYS v2.19 G H I J K H I JET45 SYS v2.19 J K L M N H I J JET45 SYS v2.19 K L M N O P R1 43 0
JET45 SYS v2.18
D1 GND 5V
2A
R1 4 30
JET45 SYS v2.18
D1 GND 5V
2A

FLT CTL 2 MODULE FLT CTL 1 MODULE

USB USB

LEO BODNAR BU0836A LEO BODNAR BU0836A

SERVICE PANEL

ENVIRONMENTAL COOLING FANS

R BLOWER PACK AIR R BLOWER L BLOWER HI FLOW

L BLOWER
ADJUST MASTER MASTER ADJUST

“Lear45 Avionics Bay at a glance”

The Lear45 Avionics Bay is found at the front end of the Project45 Cockpit Shell on the
forward side of the simulated pressure bulkhead. Great effort has been taken to design an
organize “wire management” system so that all Jet45 Interface modules can be easily located
and accessed during maintenance or trouble shooting efforts.

The top two pullout panels include all the Jet45 AAS and Systems modules. The lower two
pullout panels include the Flight Control modules, Power supplies, Essential Buses, Non
Essential Buses and battery switches. The two lower pullout panels are optional based on
your personal preferences and how much of the electrical bus system you want to model.

The following pages describe in detail all the plug and pin assignments on each individual
module. You MUST wire your simulator to match the information outlined in this document!

01-01-2023 4 V2.19
 FGC MODULE

FGC MODULE RESET GND 5 2 GND GND

RST RST GND 5 2 GNDGND
GND
13
GND
13
A GND 3 4 B 9 7
GND 3 4 9 7

USB

2.50"
11 10 25 29 GND 30 53 50 47 44 40 36 32 66 62 58 GND 13 11 9 7 GND 5 3 1

11 10 25 29 GND 30 53 50 47 44 40 36 32 66 62 58 GND 13 11 9 7 GND 5 3 1

GND 12 23 27 GND 31 28 52 48 46 GND 38 34 64 60 56 GND 12 10 8 6 GND 4 2 GND
GND 12 23 27 GND 31 28 52 48 46 GND 38 34 64 60 56 GND 12 10 8 6 GND 4 2 GND

C JET45 AAS v2.18 D E F G H

5.25"

PLUG “A” OVERHEAD COMPASS:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
2 DIGITAL INPUT N/A N/A N/A N/A
3 DIGITAL INPUT N/A N/A N/A N/A
4 DIGITAL INPUT N/A N/A N/A N/A
5 DIGITAL INPUT N/A N/A N/A N/A

NOTE: Plug “A” is to be used with a Stepper Motor to control the Overhead Compass

PLUG “B” STANDBY ALTIMETER ENCODER: (OPTIONAL)

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
7 INCREASE 318-ENC70120F-10P Digital Inc None Encoder
9 DECREASE “ “ Digital Dec None Encoder

NOTE: Altimeter encoder pins are not needed if Flight Illusion gauges are used

01-01-2023 5 V2.19
PLUG “C” FGC PANEL (LEFT) SWITCHES:
PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
10 FLT DIRECTOR 1 MTN 107-6612 Momentary FD1 Push
11 COURSE 1 SYNC PEC11R-4125F-S0018 Momentary CRS1 Push
12 HEADING MTN 107-6612 Momentary HDG Push
23 HEADING SYNC PEC11R-4125F-S0018 Momentary HDG Push
25 NAVIGATION MTN 107-6612 Momentary NAV Push
27 APPROACH MTN 107-6612 Momentary APP Push
29 BANK ANGLE MTN 107-6612 Momentary BNK Push

PLUG “D” FGC PANEL ENCODERS:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
28 COURSE 1 INC PEC11R-4125F-S0018 Digital Inc CRS 1 Encoder
30 COURSE 1 DEC “ “ Digital Dec CRS 1 Encoder
31 HEADING INC PEC11R-4125F-S0018 Digital Inc HDG Encoder
44 HEADING DEC “ “ Digital Dec HDG Encoder
46 SPEED INC PEC11R-4125F-S0018 Digital Inc SPD Encoder
47 SPEED DEC “ “ Digital Dec SPD Encoder
48 ALT SEL INC PEC11R-4125F-N0018 Digital Inc ASEL Encoder
50 ALT SEL DEC “ “ Digital Dec ASEL Encoder
52 COURSE 2 INC PEC11R-4125F-S0018 Digital Inc CRS 2 Encoder
53 COURSE 2 DEC “ “ Digital Dec CRS 2 Encoder

PLUG “E” FGC PANEL (CENTER) SWITCHES:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
32 AUTOPILOT MTN 107-6612 Momentary AP Push
34 TRANSFER MTN 107-6612 Momentary XFR Push
36 YAW DAMPER MTN 107-6612 Momentary YD Push
38 SPEED MTN 107-6612 Momentary SPD Push
40 PUSH IAS/M PEC11R-4125F-S0018 Momentary IAS/M Push

01-01-2023 6 V2.19
PLUG “F” FGC PANEL (RIGHT) SWITCHES:
PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
56 FLT LEVEL CHG MTN 107-6612 Momentary FLC Push
58 VERTICAL SPD MTN 107-6612 Momentary VS Push
60 VERTICAL NAV MTN 107-6612 Momentary VNV Push
62 ALTITUDE MTN 107-6612 Momentary ALT Push
64 FLT DIRICTOR 2 MTN 107-6612 Momentary FD2 Push
66 COURSE 2 SYNC PEC11R-4125F-S0018 Momentary CRS2 Push

PLUG “G” FGC PANEL (LEFT/RIGHT) LEDs:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
6 HDG INDICATOR MTN 107-6612 Momentary HDG GREEN
7 NAV INDICATOR MTN 107-6612 Momentary NAV GREEN
8 APP INDICATOR MTN 107-6612 Momentary APP GREEN
9 BNK INDICATOR MTN 107-6612 Momentary BNK GREEN
10 FLC INDICATOR MTN 107-6612 Momentary FLC GREEN
11 VS INDICATOR MTN 107-6612 Momentary VS GREEN
12 VNV INDICATOR MTN 107-6612 Momentary VNV GREEN
13 ALT INDICATOR MTN 107-6612 Momentary ALT GREEN

PLUG “H” FGC PANEL (CENTER) LEDs:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
1 AP INDICATOR MTN 107-6612 Momentary AP GREEN
2 YD INDICATOR MTN 107-6612 Momentary YD GREEN
3 SPD INDICATOR MTN 107-6612 Momentary SPD GREEN
4 L XFR INDICATOR MTN 107-6612 Momentary None GREEN
5 R XFR INDICATOR MTN 107-6612 Momentary None GREEN

FGC RESET PLUG:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
RST RESET BUTTON BLK 12mm 4Pin Momentary FGC N/A
13 REMOTE STATUS LED “ “ “ “ “ “ RED

NOTE: All Interface modules include a “RESET” plug which consist of a pin for a Remote
Reset Button and a pin for a Remote Status LED

01-01-2023 7 V2.19
 CDU1 MODULE

CDU1 MODULE
12 11 10 9 GND 5 6 7 8

USB
A
24
13 12
11
10
2 3 4 19 5V 18 17 16 15 14 14 9
15
16
8
7
RESET 2.55"
GND GND 17 6 13 13
18 5 GND GND
5V 5V 19 4
RST RST
3

B 2
GND
RST

JET45 AAS v2.18

3.90"

PLUG “A” CDU1 (ALL 63 BUTTONS):

Use authentic UNS-1 Key Panel with attached 24 pin plug. The Arduino Nano utilizes the
“matrix row and column” system. All you need to do is plug in the 24 pin plug into the 24 pin
socket!

PLUG “B” CDU1 (5 VOLT) BACKLIGHTING:

Use 5V power source from the Center Pedestal LCU Channel via PWM

CDU1 RESET PLUG:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
RST RESET BUTTON BLK 12mm 4Pin Momentary CDU1 N/A
13 REMOTE STATUS LED “ “ “ “ “ “ RED

NOTE: All Interface modules include a “RESET” plug which consist of a pin for a Remote
Reset Button and a pin for a Remote Status LED

01-01-2023 8 V2.19
 CDU2 MODULE

CDU2 MODULE
12 11 10 9 GND 5 6 7 8

USB
A
24
13 12
11
10
2 3 4 19 5V 18 17 16 15 14 14 9
15
16
8
7
RESET 2.55"
GND GND 17 6 13 13
18 5 GND GND
5V 5V 19 4
RST RST
3

B 2
GND
RST

JET45 AAS v2.18

3.90"

PLUG “A” CDU2 (ALL 63 BUTTONS):

Use authentic UNS-1 Key Panel with attached 24 pin plug. The Arduino Nano utilizes the
“matrix row and column” system. All you need to do is plug in the 24 pin plug into the 24 pin
socket!

PLUG “B” CDU2 (5 VOLT) BACKLIGHTING:

Use 5V power source from the Center Pedestal LCU Channel via PWM

CDU2 RESET PLUG:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
RST RESET BUTTON BLK 12mm 4Pin Momentary CDU2 N/A
13 REMOTE STATUS LED “ “ “ “ “ “ RED

NOTE: All Interface modules include a “RESET” plug which consist of a pin for a Remote
Reset Button and a pin for a Remote Status LED

01-01-2023 9 V2.19
 CWP MODULE

PWM A CWP MODULE PWM B

USB

3.50"
RESET
RST GND 13
RST GND 13

A15 A13 A11 A9 GND B13 B11 B9 B7 GND GND B4 B2 B0

A15 A13 A11 A9 GND B13 B11 B9 B7 GND GND B4 B2 B0

A14 A12 A10 A8 GND B12 B10 B8 B6 GND GND B5 B3 B1
A14 A12 A10 A8 GND B12 B10 B8 B6 GND GND B5 B3 B1

JET45 AAS v2.18 A B C

3.25"

PLUG “A” CWP (LEFT) LEDs:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
A8 L REV UNSAFE N/A N/A L REV UNSAFE RED
A9 L ENG PYLON OVHT N/A N/A L ENG PYLON OVHT RED
A10 NORMAL BRAKES FAIL N/A N/A NORMAL BRAKES FAIL RED
A11 GEAR N/A N/A GEAR RED
A12 L OIL PRESS LOW N/A N/A L OIL PRESS LOW RED
A13 L FUEL PRESS LOW N/A N/A L FUEL PRESS LOW RED
A14 CABIN ALT N/A N/A CABIN ALT RED
A15 L BLEED AIR LEAK N/A N/A L BLEED AIR LEAK RED

01-01-2023 10 V2.19
PLUG “B” CWP (RIGHT) LEDs:
PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
B6 GEN FAIL N/A N/A GEN FAIL RED
B7 ENTRY DOOR N/A N/A ENTRY DOOR RED
B8 R ENG PYLON OVHT N/A N/A R ENG PYLON OVHT RED
B9 R REV UNSAFE N/A N/A R REV UNSAFE RED
B10 R BLEED AIR LEAK N/A N/A R BLEED AIR LEAK RED
B11 R FUEL PRESS LOW N/A N/A R FUEL PRESS LOW RED
B12 R OIL PRESS LOW N/A N/A R OIL PRESS LOW RED
B13 SPARE N/A N/A SPARE RED

PLUG “C” CWP (CENTER) LEDs:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
B0 L BATT OVHT N/A N/A L BATT OVHT RED
B1 EMER BATTERY N/A N/A EMER BATTERY WHITE
B2 R BATT OVHT N/A N/A R BATT OVHT RED
B3 WING OVHT N/A N/A WING OVHT RED
B4 WING/STAB LEAK N/A N/A WING/STAB LEAK RED
B5 STAB OVHT N/A N/A STAB OVHT RED

CWP RESET PLUG:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
RST RESET BUTTON BLK 12mm 4Pin Momentary CWP N/A
13 REMOTE STATUS LED “ “ “ “ “ “ RED

NOTE: All Interface modules include a “RESET” plug which consist of a pin for a Remote
Reset Button and a pin for a Remote Status LED

Addressing PWM B: Each PWM board in a chain must be assigned a unique address. This
is done with the address jumpers on the upper right edge of the PWM board. The default I2C
base address for each board is 0x40. The binary address that you program with the address
jumpers is added to the base I2C address. To program PWM B address offset, use a drop of
solder to bridge the A0 pads on the PCA9685 PWM B.

(PWM A) Board 0: Address = 0x40 Offset = binary 00000 (no jumpers required)
(PWM B) Board 1: Address = 0x41 Offset = binary 00001 (bridge A0 pads)

01-01-2023 11 V2.19
 DU1 / EFIS1 MODULE

DU1 / EFIS1 MODULE 29 29 GND

13 GND RST 25 25 27 27
RESET 13 GND RST 11 11 23 23 A
7 7 9 9

47 47 GND GND
50 50 48 48
53 53 52 52 B
28 28 GND GND
31 31 30 30 3.25"
36 36 38 38
40 40 44 44 C
46 46 GND GND

37 37 39 39
33 33 35 35
32 32 34 34 D
USB
JET45 AAS v2.18
GND GND GND

2.50"

PLUG “A” EFIS1 PANEL BUTTONS:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
7 In / hPa OMRON B3F-1055 Momentary In / hPa Push
9 CUE OMRON B3F-1055 Momentary CUE Push
11 FPA OMRON B3F-1055 Momentary FPA Push
23 WX OMRON B3F-1055 Momentary WX Push
25 FMS OMRON B3F-1055 Momentary FMS Push
27 HSI OMRON B3F-1055 Momentary HSI Push
29 NAV OMRON B3F-1055 Momentary NAV Push

01-01-2023 12 V2.19
PLUG “B” EFIS1 PANEL SELECTORS:
PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
28 BRG O FMS A11215RNZQ Selector FMS Rotary
30 BRG O ADF “ “ Selector ADF Rotary
31 BRG O NAV “ “ Selector NAV Rotary
47 BRG O OFF “ “ Selector OFF Rotary
48 BRG <> FMS A11215RNZQ Selector FMS Rotary
50 BRG <> ADF “ “ Selector ADF Rotary
52 BRG <> NAV “ “ Selector NAV Rotary
53 BRG <> OFF “ “ Selector OFF Rotary

PLUG “C” EFIS1 PANEL ENCODERS:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
36 OUTBD DU DIM INC EC11EBB24C03 Digital Inc DIM Encoder
38 OUTBD DU DIM DEC “ “ Digital Dec DIM Encoder
40 INBD DU DIM INC “ “ Digital Inc DIM Encoder
44 INBD DU DIM DEC “ “ Digital Dec DIM Encoder
46 PUSH TO TEST “ “ Momentary PUSH TO TEST Push

PLUG “D” DU1 PANEL SWITCHES:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
32 MINIMUMS INC PEC11R-4315F-N0012 Digital Inc MINIMUMS Encoder
33 MINIMUMS DEC “ “ Digital Dec MINIMUMS Encoder
34 RA/BARO OMRON B3F-1005 Momentary RA/BARO Push
35 STD OMRON B3F-1005 Momentary STD Push
37 BARO SET INC PEC11R-4315F-N0012 Digital Inc BARO SET Encoder
39 BARO SET DEC “ “ Digital Dec BARO SET Encoder

DU1/EFIS1 RESET PLUG:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
RST RESET BUTTON BLK 12mm 4Pin Momentary DU1/EFIS1 N/A
13 REMOTE STATUS LED “ “ “ “ “ “ RED

NOTE: All Interface modules include a “RESET” plug which consist of a pin for a Remote
Reset Button and a pin for a Remote Status LED

01-01-2023 13 V2.19
 DU2 / REV1 MODULE

DU2 / REV1 MODULE

GND GND GND GND
8 8 7 7
18 18 19 19 A
16 16 17 17
14 14 15 15

12 12 11 11 2.50"
6 6 5 5
4 4 3 3 B
2
2 GND GND
RST GND 13 RESET
USB
RST GND 13
JET45 AAS v2.18

1.75"

PLUG “A” DU2 PANEL SWITCHES:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
7 RTRY SET INC PEC11R-4315F-N0012 Digital Inc None Encoder
8 RTRY SET DEC “ “ Digital Dec None Encoder
14 SELECT 1 OMRON B3F-1005 Momentary None Push
15 SELECT 2 OMRON B3F-1005 Momentary None Push
16 SELECT 3 OMRON B3F-1005 Momentary None Push
17 SELECT 4 OMRON B3F-1005 Momentary None Push
18 SELECT 5 OMRON B3F-1005 Momentary None Push
19 SELECT 6 OMRON B3F-1005 Momentary None Push

01-01-2023 14 V2.19
PLUG “B” REV1 PANEL SWITCHES:
PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
2 WARN/CAUT AML21CBA2AC Momentary WARN/CAUT Push
3 DU 2 SELECTOR A12415RNZQ Selector PFD Rotary
4 DU 2 SELECTOR “ “ Selector NORM Rotary
5 DU 2 SELECTOR “ “ Selector OFF Rotary
6 EICAS REV PUSH MB2411S1W01-HB Momentary EICAS REV Push
11 WARN INDICATOR AML21CBA2AC Momentary WARN RED
12 CAUT INDICATOR “ “ Momentary CAUT AMBER

NOTE: Pins 11 and 12 are for “CAUT” and “WARN” LED Indicators

DU2 / REV1 RESET PLUG:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
RST RESET BUTTON BLK 12mm 4Pin Momentary DU2/REV1 N/A
13 REMOTE STATUS LED “ “ “ “ “ “ RED

NOTE: All Interface modules include a “RESET” plug which consist of a pin for a Remote
Reset Button and a pin for a Remote Status LED

Intentionally Left Blank

01-01-2023 15 V2.19
 DU3 / REV2 MODULE

13 GND RST DU3 / REV2 MODULE

RESET 13 GND RST
9 9 7 7
2323 11 11
A 27 27 25 25

31 31 29 29

GND GND GND GND

53 51
53 51 2.75"
B 50 52
50 52

GND GND 48 48

GNDGND GND GND

47 47 46 46
C 44 44 45 45

33 32 32 USB
JET45 AAS v2.18

2.50"

PLUG “A” DU3 PANEL SWITCHES:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
7 RTRY SET INC PEC11R-4315F-N0012 Digital Inc None Encoder
9 RTRY SET DEC “ “ Digital Dec None Encoder
11 SELECT 1 OMRON B3F-1005 Momentary None Push
23 SELECT 2 OMRON B3F-1005 Momentary None Push
25 SELECT 3 OMRON B3F-1005 Momentary None Push
27 SELECT 4 OMRON B3F-1005 Momentary None Push
29 SELECT 5 OMRON B3F-1005 Momentary None Push
31 SELECT 6 OMRON B3F-1005 Momentary None Push

01-01-2023 16 V2.19
PLUG “B” MFD JOYSTICK SWITCHES:
PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
48 JOYSTICK PUSH RKJXT1F42001 Momentary MDF JOYSTICK Push
50 JOYSTICK UP “ “ Momentary MDF JOYSTICK Pos 360
51 JOYSTICK DN “ “ Momentary MDF JOYSTICK Pos 180
52 JOYSTICK LEFT “ “ Momentary MDF JOYSTICK Pos 270
53 JOYSTICK RIGHT “ “ Momentary MDF JOYSTICK Pos 090

PLUG “C” REV2 PANEL SWITCHES:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
32 WARN INDICATOR AML21CBA2AC Momentary WARN RED
33 CAUT INDICATOR “ “ Momentary CAUT AMBER
44 WARN/CAUT AML21CBA2AC Momentary WARN/CAUT Push
45 DU 3 SELECTOR A12415RNZQ Selector PFD Rotary
46 DU 3 SELECTOR “ “ Selector NORM Rotary
47 EICAS REV PUSH MB2411S1W01-HB Momentary EICAS REV Push

NOTE: Pins 32 and 33 are for “CAUT” and “WARN” LED Indicators

DU3 / REV2 RESET PLUG:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
RST RESET BUTTON BLK 12mm 4Pin Momentary DU3/REV2 N/A
13 REMOTE STATUS LED “ “ “ “ “ “ RED

NOTE: All Interface modules include a “RESET” plug which consist of a pin for a Remote
Reset Button and a pin for a Remote Status LED

01-01-2023 17 V2.19
 DU4 / EFIS2 MODULE

DU4 / EFIS2 MODULE

RESET
RST RST
GND GND USB
13
13
2.50"
7 11 25 29 31 28 53 50 47 46 40 36 GND 32 33 37

7 11 25 29 31 28 53 50 47 46 40 36 GND 32 33 37
9 23 27 GND 30 GND 52 48 GND GND 44 38 GND 34 35 39
23 27 GND 30 GND 52 48 GND GND 44 38 GND 34 35

A JET45 AAS v2.18 B C D

3.25"

PLUG “A” EFIS2 PANEL BUTTONS:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
7 In / hPa OMRON B3F-1055 Momentary In / hPa Push
9 CUE OMRON B3F-1055 Momentary CUE Push
11 FPA OMRON B3F-1055 Momentary FPA Push
23 WX OMRON B3F-1055 Momentary WX Push
25 FMS OMRON B3F-1055 Momentary FMS Push
27 HSI OMRON B3F-1055 Momentary HSI Push
29 NAV OMRON B3F-1055 Momentary NAV Push

01-01-2023 18 V2.19
PLUG “B” EFIS2 PANEL SELECTORS:
PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
28 BRG O FMS A11215RNZQ Selector FMS Rotary
30 BRG O ADF “ “ Selector ADF Rotary
31 BRG O NAV “ “ Selector NAV Rotary
47 BRG O OFF “ “ Selector OFF Rotary
48 BRG <> FMS A11215RNZQ Selector FMS Rotary
50 BRG <> ADF “ “ Selector ADF Rotary
52 BRG <> NAV “ “ Selector NAV Rotary
53 BRG <> OFF “ “ Selector OFF Rotary

PLUG “C” EFIS2 PANEL ENCODERS:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
36 OUTBD DU DIM INC EC11EBB24C03 Digital Inc DIM Encoder
38 OUTBD DU DIM DEC “ “ Digital Dec DIM Encoder
40 INBD DU DIM INC “ “ Digital Inc DIM Encoder
44 INBD DU DIM DEC “ “ Digital Dec DIM Encoder
46 PUSH TO TEST “ “ Momentary PUSH TO TEST Push

PLUG “D” DU4 PANEL SWITCHES:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
32 MINIMUMS INC PEC11R-4315F-N0012 Digital Inc MINIMUMS Encoder
33 MINIMUMS DEC “ “ Digital Dec MINIMUMS Encoder
34 RA/BARO OMRON B3F-1005 Momentary RA/BARO Push
35 STD OMRON B3F-1005 Momentary STD Push
37 BARO SET INC PEC11R-4315F-N0012 Digital Inc BARO SET Encoder
39 BARO SET DEC “ “ Digital Dec BARO SET Encoder

DU4 / EFIS2 RESET PLUG:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
RST RESET BUTTON BLK 12mm 4Pin Momentary DU4/EFIS2 N/A
13 REMOTE STATUS LED “ “ “ “ “ “ RED

NOTE: All Interface modules include a “RESET” plug which consist of a pin for a Remote
Reset Button and a pin for a Remote Status LED

01-01-2023 19 V2.19
 RMU1 / CDR MODULE

RMU1 / CDR MODULE 28 28 26

31 30

SDA
GND

RST
SCL
3V3
13 GND RST 31 30

13 GND RST GND 3V3 SCLSDARST 27 27 29 29

A
RESET CDR OLED 23 23 25 25

9 9 11 11

34 34 32 32
38 38 36 36
44 44 40 40
47 47 46 46 B 3.25"
50 50 48 48
GND GND GND GND

69 69 67 67
65 65 63 63
61 61 60 60
62 62 64 64 C
66 66 68 68
USB 33 33 GND
JET45 AAS v2.18

2.50"

CDR OLED PLUG:

The CDR OLED plug consist of five pins, GND, 3V3, SCL, SDA and RST. These pins plug
directly in the CDR OLED socket on the back side of the CDR Panel.

PLUG “A” RMU1 (LEFT) SWITCHES:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
9 TRANSFER 1 OMRON B3F-1055 Momentary v---^ Push
11 LINE SELECT 1 OMRON B3F-1055 Momentary ----- Push
23 LINE SELECT 2 OMRON B3F-1055 Momentary ----- Push
25 LINE SELECT 3 OMRON B3F-1055 Momentary ----- Push
26 LINE SELECT 4 OMRON B3F-1055 Momentary ----- Push
27 LINE SELECT 5 OMRON B3F-1055 Momentary ----- Push
28 ID FUNCTION OMRON B3F-1055 Momentary ID Push
29 DIM FUNCTION OMRON B3F-1055 Momentary DIM Push
30 PGE FUNCTION OMRON B3F-1055 Momentary PGE Push
31 STO FUNCTION OMRON B3F-1055 Momentary STO Push

01-01-2023 20 V2.19
PLUG “B” RMU1 (RIGHT) SWITCHES:
PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
32 TRANSFER 2 OMRON B3F-1055 Momentary v---^ Push
34 LINE SELECT 6 OMRON B3F-1055 Momentary ----- Push
36 LINE SELECT 7 OMRON B3F-1055 Momentary ----- Push
38 LINE SELECT 8 OMRON B3F-1055 Momentary ----- Push
40 LINE SELECT 9 OMRON B3F-1055 Momentary ----- Push
44 LINE SELECT 10 OMRON B3F-1055 Momentary ----- Push
46 OUTER INC EC11EBB24C03 Digital Inc TUNE Encoder
47 OUTER DEC “ “ Digital Dec TUNE Encoder
48 INNER INC “ “ Digital Inc TUNE Encoder
50 INNER DEC “ “ Digital Dec TUNE Encoder

NOTE: SQ, ½, TST and DME button functions are NOT modeled

PLUG “C” CDR SWITCHES:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
33 1 COM/NAV B/L N/A Display B/L 1 COM/NAV White
60 OUTTER INC EC11EBB24C03 Digital Inc TUNE Encoder
61 OUTTER DEC “ “ Digital Dec TUNE Encoder
62 INNER INC “ “ Digital Inc TUNE Encoder
63 INNER DEC “ “ Digital Dec TUNE Encoder
64 TRANSFER OMRON B3F-1055 Momentary v----^ Push
65 EMRG/NORM OMRON B3F-1055 Momentary EMER Push
66 COM1 INDICATOR N/A Indicator > White
67 NAV AUDIO OMRON B3F-1055 Momentary NAV AUDIO Push
68 NAV1 INDICATOR N/A Indicator > White
69 SQUELCH OMRON B3F-1055 Momentary SQ Push

NOTE: Pin 33 is for 1 COM and NAV Display Back Lighting. Pins 66 & 68 are for COM &
NAV Arrow Indicators

RMU1 / CDR RESET PLUG:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
RST RESET BUTTON BLK 12mm 4Pin Momentary RMU1 / CDR N/A
13 REMOTE STATUS LED “ “ “ “ “ “ RED

NOTE: All Interface modules include a “RESET” plug which consist of a pin for a Remote
Reset Button and a pin for a Remote Status LED

NOTE: Use 0 ohm resistors for pads R2 and R3 unless otherwise stated

01-01-2023 21 V2.19
 RMU2 MODULE

13 GND RST RMU2 MODULE

RESET 13 GND RST

11 11 9 9

25 25 23 23

A 29 29 27 27

30 30 31 31

26 26 28 28
2.75"
GND GND GND GND
48 48 50 50
46 46 47 47
B 40 40 44 44
36 36 38 38
32 32 34 34
USB
JET45 AAS v2.18

2.50"

PLUG “A” RMU2 (LEFT) SWITCHES:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
9 TRANSFER 1 OMRON B3F-1055 Momentary v---^ Push
11 LINE SELECT 1 OMRON B3F-1055 Momentary ----- Push
23 LINE SELECT 2 OMRON B3F-1055 Momentary ----- Push
25 LINE SELECT 3 OMRON B3F-1055 Momentary ----- Push
26 LINE SELECT 4 OMRON B3F-1055 Momentary ----- Push
27 LINE SELECT 5 OMRON B3F-1055 Momentary ----- Push
28 ID FUNCTION OMRON B3F-1055 Momentary ID Push
29 DIM FUNCTION OMRON B3F-1055 Momentary DIM Push
30 PGE FUNCTION OMRON B3F-1055 Momentary PGE Push
31 STO FUNCTION OMRON B3F-1055 Momentary STO Push

01-01-2023 22 V2.19
PLUG “B” RMU2 (RIGHT) SWITCHES:
PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
32 TRANSFER 2 OMRON B3F-1055 Momentary v---^ Push
34 LINE SELECT 6 OMRON B3F-1055 Momentary ----- Push
36 LINE SELECT 7 OMRON B3F-1055 Momentary ----- Push
38 LINE SELECT 8 OMRON B3F-1055 Momentary ----- Push
40 LINE SELECT 9 OMRON B3F-1055 Momentary ----- Push
44 LINE SELECT 10 OMRON B3F-1055 Momentary ----- Push
46 OUTER INC EC11EBB24C03 Digital Inc TUNE Encoder
47 OUTER DEC “ “ Digital Dec TUNE Encoder
48 INNER INC “ “ Digital Inc TUNE Encoder
50 INNER DEC “ “ Digital Dec TUNE Encoder

NOTE: SQ, ½, TST and DME button functions are NOT modeled

RMU2 RESET PLUG:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
RST RESET BUTTON BLK 12mm 4Pin Momentary RMU2 N/A
13 REMOTE STATUS LED “ “ “ “ “ “ RED

NOTE: All Interface modules include a “RESET” plug which consist of a pin for a Remote
Reset Button and a pin for a Remote Status LED

Intentionally Left Blank

01-01-2023 23 V2.19
 WX RADAR MODULE

WX RADAR MODULE
RST RST
GND GND USB
13
13
RESET
10 14 16 GND 5V A6 2 4 6 8 12
1.75"
10 14 16 GND 5V A6 2 4 6 8 12
9 15 17 GND GND A7 GND 3 5 7 11
9 15 17 GND GND A7 GND 3 5 7 11

A JET45 AAS v2.18 B C

2.50"

PLUG “A” WX RADAR PANEL BUTTONS:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
9 “ARROW UP” OMRON B3F-1055 Momentary “ARROW UP” Push
10 “ARROW DN” OMRON B3F-1055 Momentary “ARROW DN” Push
14 TRB OMRON B3F-1055 Momentary TRB Push
15 STAB OMRON B3F-1055 Momentary STAB Push
16 TGT OMRON B3F-1055 Momentary TGT Push
17 SECT OMRON B3F-1055 Momentary SECT Push

PLUG “B” WX RADAR PANEL ANALOG POTS:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
A6 TILT ADJUST 531-PC16SC-1K Variable POT TILT Analog
A7 GAIN ADJUST 531-PC16SC-1K Variable POT GAIN Analog

NOTE: Pins A6 and A7 are analog pins which require 5V power

01-01-2023 24 V2.19
PLUG “C” WX RADAR PANEL SELECTOR:
PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
2 RADAR OFF A11215RNZQ Selector OFF Rotary
3 RADAR SBY “ “ Selector SBY Rotary
4 RADAR WX “ “ Selector WX Rotary
5 RADAR RCT “ “ Selector RCT Rotary
6 RADAR GMAP “ “ Selector GMAP Rotary
7 RADAR FP “ “ Selector FP Rotary
8 RADAR TST “ “ Selector TST Rotary
11 OFF LED N/A Indicator OFF AMBER
12 SLV LED N/A Indicator SLV AMBER

NOTE: Pins 11 and 12 are for “OFF” and “SLV” LED Indicators

WX RADAR RESET PLUG:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
RST RESET BUTTON BLK 12mm 4Pin Momentary WX RADAR N/A
13 REMOTE STATUS LED “ “ “ “ “ “ RED

NOTE: All Interface modules include a “RESET” plug which consist of a pin for a Remote
Reset Button and a pin for a Remote Status LED

Intentionally Left Blank

01-01-2023 25 V2.19
 JET45 ADVANCED SYSTEMS SOFTWARE

LEFT PANELS MODULE

LEFT PANELS MODULE

A1
A
A3 GND 5V
BGND
C
GND A10
D
A12 GND
E
GND GND A14 B0
F B2 B4 B6 GND B8
G
B10 B12 B14
RST RST A1 A3 GND 5V GND GND A10 A12 GND GND GND A14 B0 B2 B4 B6 GND B8 B10 B12 B14
GND GND
13
13 A0 A2 A4 A7 GND A8 A9 A11 GND A13 GND A15 B1 B3 B5 B7 GND B9 B11 B13 B15
RESET A0 A2 A4 A7 GND A8 A9 A11 GND A13 GND A15 B1 B3 B5 B7 GND B9 B11 B13 B15

3.25"

PWM A PWM B
5 3 7 11 10 6 23 27 31 28 24 43 51 52 48 47 46 42 38 34 35 33 66 62 58 54 57 61 37 65 69

5 3 7 11 10 6 23 27 31 28 24 43 51 52 48 47 46 42 38 34 35 33 66 62 58 54 57 61 37 65 69
GND 4 GND 9 12 GND 8 25 29 30 26 GND 49 53 50 45 44 40 36 32 GND 68 64 60 56 55 59 63 GND 67 GND
GND 4 GND 9 12 GND 8 25 29 30 26 GND 49 53 50 45 44 40 36 32 GND 68 64 60 56 55 59 63 GND 67 GND

H I JET45 SYS v2.19 J K L M N

6.75"

PLUG “A” SYS TEST PANEL LEDs:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
A0 RADIO CTL HOT BUS AML21CBA2AC Momentary ON WARM
A1 RUD BOOST AML21CBA2AD Alternate OFF WARM
A2 GPWS G/S AML21CBA2AC* Momentary* OFF WARM
A3 GPWS FLAP AML21CBA2AD Alternate OFF WARM
A4 GPWS TERR AML21CBA2AD Alternate OFF WARM

PLUG “B” LEFT AOA GAUGE SERVO:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
A7 AOA SERVO SIGNAL DMS-MG90-A Mechanical 270* N/A N/A

01-01-2023 26 V2.19
WARNING: Plug “B” is reserved for the Left AOA gauge with a 5V 270* micro servo
DO NOT USE FOR LEDs!

PLUG “C” GPWS INDICATOR LED:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
A8 GPWS (L FAIL) AML21CBA2AC Indicator GPWS AMBER

PLUG “D” EGPWS LEDs:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
A9 (RESERVED FOR EGPWS)
A10 (RESERVED FOR EGPWS)
A11 (RESERVED FOR EGPWS)
A12 (RESERVED FOR EGPWS)

PLUG “E” LEFT CREW PANEL LED:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
A13 AHRS HEADING AML21CBA2AD Alternate FREE WARM

PLUG “F” ELECTRICAL PANEL (LOW) LEDs:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
A14 L GEN AML21CBA2AC Momentary OFF WARM
A15 BUS-TIE (H) AML21CBA2AC Momentary MAN WARM
B0 BUS-TIE (L) “ “ “ “ -------- WARM
B1 R GEN AML21CBA2AC Momentary OFF WARM
B2 EXT PWR (H) AML21CBA2AC Momentary ON WARM
B3 EXT PWR (L) “ “ “ “ AVAIL GREEN
B4 L BATT AML21CBA2AC Momentary OFF WARM
B5 R BATT AML21CBA2AC Momentary OFF WARM
B6 APU GEN (H) AML21CBA2AC Momentary ON WARM
B7 APU GEN (L) “ “ “ “ AVAIL GREEN

01-01-2023 27 V2.19
PLUG “G” ELECTRICAL PANEL (HIGH) LEDs:
PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
B8 L AV MSTR AML21CBA2AD Alternate OFF WARM
B9 EMER BATT (H) AML21CBA2AD Alternate EMER WARM
B10 EMER BATT (L) “ “ “ “ OFF WARM
B11 R AV MSTR AML21CBA2AD Alternate OFF WARM
B12 L MAIN AML21CBA2AC Momentary OFF WARM
B13 L NON-ESS AML21CBA2AC Momentary OFF WARM
B14 R NON-ESS AML21CBA2AC Momentary OFF WARM
B15 R MAIN AML21CBA2AC Momentary OFF WARM

PLUG “H” CREW OXYGEN MASK: (OPTIONAL)

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
3 CAPT PUSH TO TEST R13-502 Momentary PUSH TO TEST Push
5 FO PUSH TO TEST R13-502 Momentary PUSH TO TEST Push
4 SPARE/TEST PIN N/A N/A N/A N/A

PLUG “I” SYS TEST PANEL SWITCHES:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
7 RADIO CTL HOT BUS AML21CBA2AC Momentary ON Push
9 RUD BOOST AML21CBA2AD Alternate OFF Push
10 GPWS G/S AML21CBA2AC* Momentary* OFF Push
11 GPWS FLAP AML21CBA2AD Alternate OFF Push
12 GPWS TERR AML21CBA2AD Alternate OFF Push
N/A PIT TRIM BIAS 1TL1-7E (ON)-OFF-(ON) NDN/NUP Toggle

NOTE: Pitch Trim Bias toggle is not modeled in software. Mechanical action toggle only!

01-01-2023 28 V2.19
PLUG “J” SYS TEST / RESET SWITCHES:
PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
6 OFF A11215RNZQ Selector OFF Rotary
8 FIRE DET “ “ “ “ FIRE DET Rotary
23 LTS “ “ “ “ LTS Rotary
24 GEAR “ “ “ “ GEAR Rotary
25 FLAPS “ “ “ “ FLAPS Rotary
26 ADC “ “ “ “ ADC Rotary
27 STALL “ “ “ “ STALL Rotary
28 ANTI-ICE “ “ “ “ ANTI-ICE Rotary
29 GPWS “ “ “ “ GPWS Rotary
30 SPLRN RESET “ “ “ “ SPLRN RESET Rotary
31 FLAP RESET “ “ “ “ FLAP RESET Rotary
N/A PRESS TEST MB2411S1W01-HB Momentary PRESS TEST Push

NOTE: PRESS TEST push button closes ground connection to A11215RNZQ rotary selector

PLUG “K” CAPT YOKE MISC. SWITCHES:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
43 ATC IDENT C2006 SAFRAN Momentary None Push
45 MASTER SWITCH 26619P-18 Momentary MSW Push
47 CHCKLST ADVANCE C2006 SAFRAN Momentary CHKLST ADV Push
48 TCH CTL STR C2006 SAFRAN Momentary TCS Push
49 PUSH TO TALK C2006 SAFRAN Momentary None Push
50 TRIM NOSE DOWN OTTO T4-0111 Momentary NOSE DOWN SPCL
51 TRIM NOSE UP “ “ “ “ NOSE UP SPCL
52 TRIM LW DOWN “ “ “ “ LWD SPCL
53 TRIM RW DOWN “ “ “ “ RWD SPCL

PLUG “L” ELECTRICAL REVERSION SWITCHES:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
32 IC/SG NORM 1 A12415RNZQ Selector 1 Rotary
N/A IC/SG NORMAL “ “ “ “ IC/SG NORM Rotary
34 IC/SG NORM 2 “ “ “ “ 2 Rotary
36 ADC NORM 1 A12415RNZQ Selector 1 Rotary
N/A ADC NORMAL “ “ “ “ ADC NORM Rotary
38 ADC NORM 2 “ “ “ “ 2 Rotary
40 AHRS NORM 1 A12415RNZQ Selector 1 Rotary
N/A AHRS NORMAL “ “ “ “ AHRS NORM Rotary
42 AHRS NORM 2 “ “ “ “ 2 Rotary
44 DAU NORM A A12415RNZQ Selector A Rotary
N/A DAU NORMAL “ “ “ “ DAU NORM Rotary
46 DAU NORM B “ “ “ “ B Rotary
35 SPARE/TEST PIN N/A N/A N/A N/A

01-01-2023 29 V2.19
PLUG “M” ELECTRICAL PANEL SWITCHES:
PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
33 L AV MSTR AML21CBA2AD Alternate OFF Push
54 EMER BATT AML21CBA2AD Alternate EMER/OFF Push
55 R AV MSTR AML21CBA2AD Alternate OFF Push
56 L MAIN AML21CBA2AC Momentary OFF Push
57 L NON-ESS AML21CBA2AC Momentary OFF Push
58 R NON-ESS AML21CBA2AC Momentary OFF Push
59 R MAIN AML21CBA2AC Momentary OFF Push
60 L GEN AML21CBA2AC Momentary OFF Push
61 BUS-TIE AML21CBA2AC Momentary MAN/-------- Push
62 R GEN AML21CBA2AC Momentary OFF Push
63 EXT PWR AML21CBA2AC Momentary ON/AVAIL Push
64 L BATT AML21CBA2AC Momentary OFF Push
66 R BATT AML21CBA2AC Momentary OFF Push
68 APU GEN AML21CBA2AC Momentary ON/AVAIL Push
37 SPARE/TEST PIN N/A N/A N/A N/A

PLUG “N” LEFT CREW PANEL SWITCHES:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
65 AHRS HEADING AML21CBA2AD Alternate FREE Push
67 AHRS L SLAVE 1TL1-7 (ON)-OFF-(ON) L Toggle
69 AHRS R SLAVE “ “ “ “ R Toggle
N/A RUDDER PEDAL 1TL1-7 (ON)-OFF-(ON) FWD/AFT Toggle

NOTE: Rudder Pedal toggle is not modeled in software. Mechanical action toggle only!

LEFT PANELS RESET PLUG:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
RST RESET BUTTON BLK 12mm 4Pin Momentary L PANELS N/A
13 REMOTE STATUS LED “ “ “ “ “ “ RED

NOTE: All Interface modules include a “RESET” plug which consist of a pin for a Remote
Reset Button and a pin for a Remote Status LED

Addressing PWM B: Each PWM board in a chain must be assigned a unique address. This
is done with the address jumpers on the upper right edge of the PWM board. The default I2C
base address for each board is 0x40. The binary address that you program with the address
jumpers is added to the base I2C address. To program PWM B address offset, use a drop of
solder to bridge the A0 pads on the PCA9685 PWM B.

(PWM A) Board 0: Address = 0x40 Offset = binary 00000 (no jumpers required)
(PWM B) Board 1: Address = 0x41 Offset = binary 00001 (bridge A0 pads)

01-01-2023 30 V2.19
 RIGHT PANELS MODULE

RIGHT PANELS MODULE

A1 A3 A5
A A7 A9 GND
B
GND 5V
C GND GND
DA13 B0 B2
E B4 GND B6 B8 B10
F
B12 B14 GND
RST RST A1 A3 A5 A7 A9 GND GND 5V GND GND A13 B0 B2 B4 GND B6 B8 B10 B12 B14 GND
GND GND
13
13 A0 A2 A4 A6 A8 GND A10 A11 GND A12 A14 A15 B1 B3 B5 GND B7 B9 B11 B13 B15
RESET A0 A2 A4 A6 A8 GND A10 A11 GND A12 A14 A15 B1 B3 B5 GND B7 B9 B11 B13 B15

3.25"

PRES R2 0 PWM A PWM B

Use 0ohm resistors for pads R2
RST RST R3 0
6 2
and R3 unless otherwise stated.
5 9 12 8 25 27 31 28 24 51 52 48 45 46 42 40 36 32 68 64 60 56 35 55 59 63 67 37
SDA SDA
SCL SCL 6 2 5 9 12 8 25 27 31 28 24 51 52 48 45 46 42 40 36 32 68 64 60 56 35 55 59 63 67 37
5V 5V
GND GND GND 4 3 7 11 10 23 GND 29 30 26 49 53 50 47 44 GND 38 34 33 66 62 58 54 GND 57 61 65 69 GND
OLED GND 4 3 7 11 10 23 GND 29 30 26 49 53 50 47 44 GND 38 34 33 66 62 58 54 GND 57 61 65 69 GND

JET45 SYS v2.19 G H I J K

6.75"

PLUG “A” PRESSURE PANEL LEDs:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
A0 PAX OXY/AUTO AML21CBA2AC Momentary OFF WARM
A1 DEPLOY AML21CBA2AC* Momentary* [ ON ] WARM
A2 EMER PRESS AML21CBA2AC* Momentary* [ ON ] WARM
A3 PACK AML21CBA2AD* Alternate* OFF WARM
A4 HI-FLOW AML21CBA2AD* Alternate* ON WARM
A5 L BLEED AML21CBA2AD* Alternate* OFF WARM
A6 R BLEED AML21CBA2AD* Alternate* OFF WARM
A7 APU BLEED AML21CBA2AC Momentary ON WARM
A8 EMER DEPRESS AML21CBA2AD Alternate [ ON ] WARM
A9 MANUAL PRESS AML21CBA2AC Momentary ON WARM

PLUG “B” GPWS INDICATOR LED:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
A10 GPWS (R FAIL) AML21CBA2AC Indicator GPWS AMBER

01-01-2023 31 V2.19
PLUG “C” RIGHT AOA GAUGE SERVO:
PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
A11 AOA SERVO SIGNAL DMS-MG90-A Mechanical 270* N/A N/A

WARNING: Plug “C” is reserved for the Right AOA gauge with a 5V 270* micro servo
DO NOT USE FOR LEDs!

PLUG “D” ENVIRONMENTAL PANEL LEDs:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
A12 BAG HT AML21CBA2AD Alternate OFF WARM
A13 MANUAL TEMP AML21CBA2AD Alternate ON WARM
A14 AHRS HEADING AML21CBA2AD Alternate FREE WARM

PLUG “E” ANTI-ICE PANEL LEDs:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
A15 L PROBES AML21CBA2AD Alternate OFF WARM
B0 R PROBES AML21CBA2AD Alternate OFF WARM
B1 L WSHLD AML21CBA2AD Alternate OFF WARM
B2 R WSHLD AML21CBA2AD Alternate OFF WARM
B3 WING/STAB AML21CBA2AD Alternate ON WARM
B4 L NAC AML21CBA2AD Alternate ON WARM
B5 R NAC AML21CBA2AD Alternate ON WARM

PLUG “F” GEAR/HYD PANEL LEDs:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
B6 GEAR NOSE (H) AML21CBA2AC Indicator ////////// WHITE
B7 GEAR NOSE (L) “ “ “ “ DOWN GREEN
B8 GEAR LEFT (H) AML21CBA2AC Indicator ////////// WHITE
B9 GEAR LEFT (L) “ “ “ “ DOWN GREEN
B10 GEAR RIGHT (H) AML21CBA2AC Indicator ////////// WHITE
B11 GEAR RIGHT (L) “ “ “ “ DOWN GREEN
B12 NOSE STEER AML21CBA2AC Momentary ON WARM
B13 ANTI-SKID AML21CBA2AD* Alternate* OFF WARM
B14 AUX HYD AML21CBA2AC Momentary ON WARM
B15 HYD XFLOW AML21CBA2AC Momentary ON WARM

01-01-2023 32 V2.19
PLUG “G” GEAR/HYD PANEL (LEFT) SWITCHES:
PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
2 L TAXI/LDG OFF 1TL1-1 ON-OFF-ON OFF Toggle
N/A L TAXI (ONLY) “ “ “ “ TAXI Toggle
3 L TAXI/LDG “ “ “ “ L LDG Toggle
4 L PROBES AML21CBA2AD Alternate OFF Push
5 R PROBES AML21CBA2AD Alternate OFF Push
7 L WSHLD AML21CBA2AD Alternate OFF Push
8 R WSHLD AML21CBA2AD Alternate OFF Push
9 WING/STAB AML21CBA2AD Alternate ON Push
10 L NAC AML21CBA2AD Alternate ON Push
11 R NAC AML21CBA2AD Alternate ON Push
12 NAV/LOGO OFF 1TL1-1 ON-OFF-ON OFF Toggle
N/A NAV (ONLY) “ “ “ “ NAV Toggle
N/A NAV/LOGO “ “ “ “ LOGO Toggle
23 WING INSP (PAUSE) SB4011NOHG-2B OFF-(ON) WING INSP Push
25 EMER LIGHTS OFF 2TL1-1P* ON-OFF-ON OFF Toggle
N/A EMER LIGHTS ARM “ “ “ “ ARM Toggle
N/A EMER LIGHTS ON “ “ “ “ ON Toggle
6 SPARE/TEST PIN N/A N/A N/A N/A

NOTE: The L and R TAXI/LDG toggles, BCN/STROBE toggle, PULSE/RECOG toggle and
the NO SMOKING/BELTS toggle are all “Three Position Toggles” that have an active center
position. Simply wire the toggles like the one illustrated below (ground in the center) and let
the software do the rest by detecting active high/low signals!

01-01-2023 33 V2.19
NOTE: (Emergency Lights Toggle) Connect pin 25 (OFF position) to toggle terminal #3 and
common line (ARM position) to toggle terminal #2. If emergency conditions are met, Relay 16
will close and the Emergency lights will activate. Use second pole for manual selection to the
ON position. Connect 12 volt ground from the LEFT HOT BUS to toggle terminal #4.
Connect the return ground to toggle terminal #5 for Emergency Lights in the cabin.

WARNING: Be sure to keep terminals #4 and #5 of the toggle isolated from terminals #2 and
#3 due to 12 volt power on this side of the double pole switch!

Additionally, if you do not want to model the ON position of the Emergency Lights Toggle,
there is the option to use a 1TL1-1M ON-OFF-ON single pole toggle for just the software
simulation part of the Emergency lights functions. In this case, only connect pin 25 (OFF
position) to toggle terminal #3 and common line (ARM position) to toggle terminal #2.

PLUG “H” GEAR/HYD PANEL (RIGHT) SWITCHES:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
24 PULSE/RECOG OFF 1TL1-1 ON-OFF-ON OFF Toggle
N/A PULSE “ “ “ “ PULSE Toggle
26 RECOG “ “ “ “ RECOG Toggle
27 BCN/STROBE OFF 1TL1-1 ON-OFF-ON OFF Toggle
N/A BCN (ONLY) “ “ “ “ BCN Toggle
28 BCN/STROBE “ “ “ “ BCN/STROBE Toggle
29 R TAXI/LDG OFF 1TL1-1 ON-OFF-ON OFF Toggle
N/A R TAXI (ONLY) “ “ “ “ TAXI Toggle
30 R TAXI/LDG “ “ “ “ R LDG Toggle
31 NO SMKNG/BELTS OFF 1TL1-1 ON-OFF-ON OFF Toggle
N/A BELTS (ONLY) “ “ “ “ BELTS Toggle
48 NO SMKNG/BELTS “ “ “ “ NO SMKNG/BELTS Toggle
49 GEAR KNOB 1TL1-2D OFF-ON UP Toggle
N/A GEAR KNOB “ “ “ “ DN Toggle
50 NOSE STEER AML21CBA2AC Momentary ON Push
51 ANTI-SKID AML21CBA2AD* Alternate* OFF Push
52 AUX HYD AML21CBA2AC Momentary ON Push
53 HYD XFLOW AML21CBA2AC Momentary ON Push

NOTE: R LDG/TAXI toggle is not currently modeled in software. L LDG/TAXI toggle controls
both left and right taxi and landing lights!

01-01-2023 34 V2.19
PLUG “I” ENVIRONMENTAL PANEL SWITCHES:
PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
42 BAG HEAT AML21CBA2AD Alternate OFF Push
44 MANUAL TEMP AML21CBA2AD Alternate ON Push
45 AHRS HEADING AML21CBA2AD Alternate FREE Push
46 AHRS SLAVE L 1TL1-7 (ON)-OFF-(ON) L Toggle
47 AHRS SLAVE R “ “ “ “ R Toggle
N/A CVR ERASE SB4011NOHG-2B OFF-(ON) ERASE Push
N/A RUDDER PEDAL 1TL1-7 (ON)-OFF-(ON) FWD/AFT Toggle

NOTE: CVR ERASE is not modeled in software

NOTE: Rudder Pedal toggle is not modeled in software. Mechanical action toggle only!

PLUG “J” PRESSURE PANEL SWITCHES:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
32 PAX OXY/AUTO AML21CBA2AC Momentary OFF Push
33 DEPLOY AML21CBA2AC* Momentary* [ ON ] Push
34 EMER PRESS AML21CBA2AC* Momentary* [ ON ] Push
36 PACK AML21CBA2AD* Alternate* OFF Push
38 HI FLOW AML21CBA2AD* Alternate* ON Push
40 L BLEED AML21CBA2AD* Alternate* OFF Push
54 R BLEED AML21CBA2AD* Alternate* OFF Push
56 APU BLEED AML21CBA2AC Momentary ON Push
58 EMER DEPRESS AML21CBA2AD Alternate [ ON ] Push
60 MANUAL PRESS AML21CBA2AC Momentary ON Push
62 LDG ALT UP EC12E2420801 Digital Inc UP Encoder
64 LDG ALT DN “ “ Digital Dec DN Encoder
66 MANUAL UP EC12E2420801 Digital Inc UP Encoder
68 MANUAL DN “ “ Digital Dec DN Encoder
35 SPARE/TEST PIN N/A N/A N/A N/A

01-01-2023 35 V2.19
PLUG “K” FO YOKE MISC. SWITCHES:
PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
37 ATC IDENT C2006 SAFRAN Momentary None Push
55 MASTER SWITCH 26619P-18 Momentary MSW Push
57 CHCKLST ADVANCE C2006 SAFRAN Momentary CHKLST ADV Push
59 TCH CTL STR C2006 SAFRAN Momentary TCS Push
61 PUSH TO TALK C2006 SAFRAN Momentary None Push
63 TRIM NOSE DOWN OTTO T4-0111 Momentary NOSE DOWN SPCL
65 TRIM NOSE UP “ “ “ “ NOSE UP SPCL
67 TRIM LW DOWN “ “ “ “ LWD SPCL
69 TRIM RW DOWN “ “ “ “ RWD SPCL

PRESSURE OLED PLUG:

The Pressure Display OLED plug consist of five pins, GND, 5V, SCL, SDA and RST. These
pins plug directly in the Pressure OLED socket on the back side of the Pressure Panel.

RIGHT PANELS RESET PLUG:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
RST RESET BUTTON BLK 12mm 4Pin Momentary R PANELS N/A
13 REMOTE STATUS LED “ “ “ “ “ “ RED

NOTE: All Interface modules include a “RESET” plug which consist of a pin for a Remote
Reset Button and a pin for a Remote Status LED

NOTE: Use 0 ohm resistors for pads R2 and R3 unless otherwise stated

Addressing PWM B: Each PWM board in a chain must be assigned a unique address. This
is done with the address jumpers on the upper right edge of the PWM board. The default I2C
base address for each board is 0x40. The binary address that you program with the address
jumpers is added to the base I2C address. To program PWM B address offset, use a drop of
solder to bridge the A0 pads on the PCA9685 PWM B.

(PWM A) Board 0: Address = 0x40 Offset = binary 00000 (no jumpers required)
(PWM B) Board 1: Address = 0x41 Offset = binary 00001 (bridge A0 pads)

01-01-2023 36 V2.19
 PEDESTAL PANELS MODULE

PED PANELS MODULE

GND
A A2 A4 A7
B A9 GND 5V
C GND
D
GND GND
EA14 GND B1
F B3 B5 GND B8
G
B10 B12 B14
RST RST GND A2 A4 A7 A9 GND 5V GND GND GND A14 GND B1 B3 B5 GND B8 B10 B12 B14
GND GND
13
13 A1 A3 A5 A6 A8 A10 A11 A12 A13 GND A15 B0 B2 B4 B6 B7 B9 B11 B13 B15
RESET A1 A3 A5 A6 A8 A10 A11 A12 A13 GND A15 B0 B2 B4 B6 B7 B9 B11 B13 B15

3.25"

PWM A PWM B
2 4 18 5 7 11 15 10 23 27 31 28 26 49 53 50 45 47 44 40 36 32 68 66 62 58 54 57 61 63 67 69

2 4 18 5 7 11 15 10 23 27 31 28 26 49 53 50 45 47 44 40 36 32 68 66 62 58 54 57 61 63 67 69
6 GND GND 3 9 GND GND 12 8 25 29 30 GND 24 51 52 48 46 42 38 34 33 GND 64 60 56 55 59 GND 65 GND GND
GND GND 3 9 GND GND 12 8 25 29 30 GND 24 51 52 48 46 42 38 34 33 GND 64 60 56 55 59 GND 65 GND

H I J JET45 SYS v2.19 K L M N O P

6.75"

APU DISPLAY MODULE

APU DISPLAY AMP DISPLAY

JET45 SYS v2.18

USB
1.25"
1.75" 11 10 9
RESET 11 10 9 11 10 9
2 3 4 5 6 7 8
RST GND 13
11 10 9 2 3 4 5 6 7 8
2 3 4 5 6 7 8
RST GND 13
1.25"
2 3 4 5 6 7 8

JET45 SYS v2.18 Q

2.50"

NOTE: PLUG “Q” is connected to an isolated Arduino Nano to operate the APU AMP Window
comprised of three Vishay seven segments displays via Multiplexing

01-01-2023 37 V2.19
PLUG “A” AIRSHOW PANEL LEDs:
PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
A1 “FLTDECK” N/A N/A FLTDECK GREEN
A2 “FLTDECK” N/A N/A FLTDECK GREEN
A3 “FLTDECK” N/A N/A FLTDECK GREEN
A4 “FLTDECK” N/A N/A FLTDECK GREEN
A5 “*” N/A N/A * GREEN

PLUG “B” APU PANEL LEDs:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
A6 APU MASTER AML21CBA2AD Alternate ON WARM
A7 APU FAIL AML21CBA2AC Indicator APU FAIL AMBER
A8 START/STOP START AML21CBA2AC Momentary START WARM
A9 START/STOP RUN “ “ “ “ RUN GREEN
A10 FIRE PUSH AML21CBA2AC* Momentary* [ FIRE PUSH ] RED

PLUG “C” SPARE LEDs / SERVO:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
A11 RESERVED
A12 RESERVED

WARNING: Plug “C” can also be used with a 5 volt micro servo. Be aware of the 5V pin!

PLUG “D” ELT PANEL LED:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
A13 ELT ON N/A N/A N/A RED

PLUG “E” SEL CAL PANEL LEDs:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
A14 SEL CAL HF AML21CBA2AC Momentary HF WARM
A15 SEL CAL VHF “ “ “ “ VHF WARM

01-01-2023 38 V2.19
PLUG “F” ENGINE PANEL (LEFT) LEDs:
PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
B0 L EXTINGUISHER #1 AML21CBA2AC Momentary [ ARMED ] WARM
B1 L EXTINGUISHER #2 AML21CBA2AC Momentary [ ARMED ] WARM
B2 L ENGINE FIRE (H) AML21CBA2AD* Alternate* [ CLOSED ] WARM
B3 L ENGINE FIRE (L) “ “ “ “ [ FIRE PUSH ] RED
B4 L ENG START AML21CBA2AC Momentary [ ON ] WARM
B5 L ENG IGNITION AML21CBA2AD* Alternate* ON WARM
B6 FUEL L STANDBY AML21CBA2AD* Alternate* ON WARM

PLUG “G” ENGINE PANEL (RIGHT) LEDs:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
B7 FUEL XFLOW AML21CBA2AD* Alternate* -------- WARM
B8 FUEL R STANDBY AML21CBA2AD* Alternate* ON WARM
B9 APR ARM AML21CBA2AD Alternate ARM WARM
B10 R ENGINE FIRE (H) AML21CBA2AD* Alternate* [ CLOSED ] WARM
B11 R ENGINE FIRE (L) “ “ “ “ [ FIRE PUSH ] RED
B12 R EXTINGUISHER #2 AML21CBA2AC Momentary [ ARMED ] WARM
B13 R EXTINGUISHER #1 AML21CBA2AC Momentary [ ARMED ] WARM
B14 R ENG IGNITION AML21CBA2AD* Alternate* ON WARM
B15 R ENG START AML21CBA2AC Momentary [ ON ] WARM

PLUG “H” TQ PEDESTAL SWITCHES:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
2 PITCH DISCONNECT SS-01GL2 Momentary N/A Miniature
4 GEAR FREEFALL SS-01GL2 Momentary N/A Miniature
6 ROLL DISCONNECT SS-01GL2 Momentary N/A Miniature

PLUG “I” ELT PANEL SWITCHES:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
3 ELT ARM 7203K2ZQE ON-OFF-ON ARM Toggle
N/A ELT RESET “ “ “ “ ELT Toggle
5 ELT ON “ “ “ “ ON Toggle
18 SPARE/TEST PIN N/A N/A N/A N/A

01-01-2023 39 V2.19
PLUG “J” AIRSHOW PANEL SWITCHES:
PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
7 SCROLL INCREASE EC12E2420801 Digital Inc SCROLL Encoder
9 SCROLL DECREASE “ “ Digital Dec SCROLL Encoder
11 AIRSHOW SELECT MML 21HA2AAW OFF-(ON) SELECT Push

PLUG “K” TRIM PANEL SWITCHES:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
8 LEFT SEC NDN MASON 309-4301 Momentary NDN SPCL
10 LEFT SEC NUP “ “ “ “ NUP SPCL
12 RIGHT SEC NDN “ “ “ “ NDN SPCL
23 RIGHT SEC NUP “ “ “ “ NUP SPCL
25 PITCH TRIM PRI 4TL1-1A ON-OFF-ON PRI Toggle
N/A PITCH TRIM OFF “ “ “ “ OFF Toggle
27 PITCH TRIM SEC “ “ “ “ SEC Toggle
28 RUD NOSE LEFT E3G0603N-2 Momentary NOSE LEFT Selector
N/A RUD TRIM OFF “ “ “ “ OFF Selector
29 RUD NOSE RIGHT “ “ “ “ NOSE RIGHT Selector
30 PIT TRM BIAS LIMIT SS-01GL2 Momentary None Miniature
31 PIT TRM BIAS LIMIT SS-01GL2 Momentary None Miniature
15 SPARE/TEST PIN N/A N/A N/A N/A

PLUG “L” TQ MODULE SWITCHES:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
24 LEFT REVERSER SS-01GL2 Momentary N/A Miniature
26 RIGHT REVERSER SS-01GL2 Momentary N/A Miniature
45 LEFT FUEL CUTOFF SS-01GL2 Momentary N/A Miniature
48 RIGHT FUEL CUTOFF SS-01GL2 Momentary N/A Miniature
49 L REVERSE LOCK SS-01GL2 Momentary N/A Miniature
50 R REVERSE LOCK SS-01GL2 Momentary N/A Miniature
51 PARKING BRAKE SS-01GL2 Momentary N/A Miniature
52 GO AROUND OTTO P7-566222 Momentary GO AROUND Push
53 MUTE OTTO P7-566222 Momentary MUTE Push

01-01-2023 40 V2.19
PLUG “M” ENGINE PANEL (LEFT) SWITCHES:
PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
32 L EXTINGUISHER #1 AML21CBA2AC Momentary [ ARMED ] Push
33 L EXTINGUISHER #2 AML21CBA2AC Momentary [ ARMED ] Push
34 L ENGINE FIRE AML21CBA2AD* Alternate* [ CLOSED / FP ] Push
36 L ENG START AML21CBA2AC Momentary [ ON ] Push
38 L ENG IGNITION AML21CBA2AD* Alternate* ON Push
40 L ENG CMPTR ON 1TL1-1A ON-OFF-ON ON Toggle
N/A L ENG CMPTR MAN “ “ “ “ MAN Toggle
42 L ENG CMPTR OFF “ “ “ “ OFF Toggle
44 FUEL L STANDBY AML21CBA2AD* Alternate* ON Push
46 FUEL XFLOW AML21CBA2AD* Alternate* -------- Push
47 FUEL R STANDBY AML21CBA2AD* Alternate* ON Push
68 FUEL USED RESET SB4011NOHG-2B OFF-(ON) None Push

NOTE: The L and R ENG CMPTR toggles and the ENG SYNC N1/N2 toggle are “Three
Position Toggles” that have an active center position. Simply wire the toggles like the one
illustrated below (ground in the center) and let the software do the rest by detecting active
high/low signals!

01-01-2023 41 V2.19
PLUG “N” ENGINE PANEL (RIGHT) SWITCHES:
PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
54 ENTRY DOOR SW SB4011NOHG-2B OFF-(ON) EDS RECORD Push
55 ENG SYNC OFF 1TL1-1 ON-OFF-ON OFF Toggle
N/A ENG SYNC N2 “ “ “ “ N2 Toggle
56 ENG SYNC N1 “ “ “ “ N1 Toggle
57 APR ARM AML21CBA2AD Alternate ARM Push
58 R ENGINE FIRE AML21CBA2AD* Alternate* [ CLOSED / FP ] Push
59 R EXTINGUISHER #2 AML21CBA2AC Momentary [ ARMED ] Push
60 R EXTINGUISHER #1 AML21CBA2AC Momentary [ ARMED ] Push
61 R ENG CMPTR ON 1TL1-1A ON-OFF-ON ON Toggle
N/A R ENG CMPTR MAN “ “ “ “ MAN Toggle
62 R ENG CMPTR OFF “ “ “ “ OFF Toggle
64 R ENG IGNITION AML21CBA2AD* Alternate* ON Push
66 R ENG START AML21CBA2AC Momentary [ ON ] Push

PLUG “O” APU PANEL SWITCHES:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
63 APU MASTER AML21CBA2AD Alternate ON Push
65 START/STOP AML21CBA2AC Momentary START/RUN Push
67 FIRE PUSH AML21CBA2AC* Momentary* [ FIRE PUSH ] Push

PLUG “P” SEL CAL PANEL SWITCH:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
69 SEL CAL AML21CBA2AC Momentary HF/VHF Push

PEDESTAL PANELS RESET PLUG:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
RST RESET BUTTON BLK 12mm 4Pin Momentary PED PANELS N/A
13 REMOTE STATUS LED “ “ “ “ “ “ RED

NOTE: All Interface modules include a “RESET” plug which consist of a pin for a Remote
Reset Button and a pin for a Remote Status LED

01-01-2023 42 V2.19
PLUG “Q” APU AMP DISPLAY:
PIN DESCRIPTION 7 SEGMENT ACTION LEGEND COLOR
2 SEGMENT “A” TDSL3160 LED SEG “A” X3 N/A ORANGE
3 SEGMENT “B” “ “ LED SEG “B” X3 N/A ORANGE
4 SEGMENT “C” “ “ LED SEG “C” X3 N/A ORANGE
5 SEGMENT “D” “ “ LED SEG “D” X3 N/A ORANGE
6 SEGMENT “E” “ “ LED SEG “E” X3 N/A ORANGE
7 SEGMENT “F” “ “ LED SEG “F” X3 N/A ORANGE
8 SEGMENT “G” “ “ LED SEG “G” X3 N/A ORANGE
9 1st SEGMENT COM “ “ MULTIPLEXING N/A N/A
10 2nd SEGMENT COM “ “ MULTIPLEXING N/A N/A
11 3rd SEGMENT COM “ “ MULTIPLEXING N/A N/A

NOTE: PLUG “Q” is connected to an isolated Arduino Nano to operate the APU AMP Window
comprised of three Vishay seven segments displays via Multiplexing.

APU DISPLAY RESET PLUG:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
RST RESET BUTTON BLK 12mm 4Pin Momentary APU N/A
13 REMOTE STATUS LED “ “ “ “ “ “ RED

NOTE: All Interface modules include a “RESET” plug which consist of a pin for a Remote
Reset Button and a pin for a Remote Status LED

Addressing PWM B: Each PWM board in a chain must be assigned a unique address. This
is done with the address jumpers on the upper right edge of the PWM board. The default I2C
base address for each board is 0x40. The binary address that you program with the address
jumpers is added to the base I2C address. To program PWM B address offset, use a drop of
solder to bridge the A0 pads on the PCA9685 PWM B.

(PWM A) Board 0: Address = 0x40 Offset = binary 00000 (no jumpers required)
(PWM B) Board 1: Address = 0x41 Offset = binary 00001 (bridge A0 pads)

01-01-2023 43 V2.19
 LEFT ACP MODULE

LEFT ACP MODULE

RESET
13 13
USB GND GND
RST RST

2.50"
26 22 25 29 30 49 53 50 47 44 A14 A10 A6 A2 A5 A9 A13 5V

26 22 25 29 30 49 53 50 47 44 A14 A10 A6 A2 A5 A9 A13 5V

24 23 27 31 GND GND 51 52 48 46 A12 A8 A4 A3 A7 A11 A15GND
23 27 31 GND GND 51 52 48 46 A12 A8 A4 A3 A7 A11 A15

A JET45 SYS v2.18 B C

3.50"

PLUG “A” LEFT ACP (LEFT) BUTTONS:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
22 VHF1 TRANSMIT Honeywell OEM Latching VHF1 Push
23 VHF2 TRANSMIT Honeywell OEM Latching VHF2 Push
24 HF1 TRANSMIT Honeywell OEM Latching HF1 Push
25 VHF1 SELECT Honeywell OEM Latching VHF1 Push
27 VHF2 SELECT Honeywell OEM Latching VHF2 Push
28 HF1 SELECT Honeywell OEM Latching HF1 Push
29 NAV1 SELECT Honeywell OEM Latching NAV1 Push
30 NAV2 SELECT Honeywell OEM Latching NAV2 Push
31 ADF1 SELECT Honeywell OEM Latching ADF1 Push

01-01-2023 44 V2.19
PLUG “B” LEFT ACP (RIGHT) BUTTONS:
PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
44 PA TRANSMIT Honeywell OEM Latching PA Push
46 EMER TRANSMIT Honeywell OEM Latching EMER Push
47 MIC/MASK SELECT Honeywell OEM Latching MIC/MASK Push
48 DME1/2 SELECT Honeywell OEM Latching DME1/2 Push
49 ID/VOICE SELECT Honeywell OEM Latching ID/VOICE Push
50 SIDETONE SELECT Honeywell OEM Latching SIDETONE Push
51 MARKER SELECT Honeywell OEM Latching MKR Push
52 MUTE LO/HI SENS Honeywell OEM Momentary MUTE Push
53 INTERPHONE SELECT Honeywell OEM Latching INPH Push

PLUG “C” LEFT ACP ANALOG POTS:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
A2 VHF1 ADJUST Honeywell OEM Variable POT VHF1 Analog
A3 VHF2 ADJUST Honeywell OEM Variable POT VHF2 Analog
A4 HF1 ADJUST Honeywell OEM Variable POT HF1 Analog
A5 NAV1 ADJUST Honeywell OEM Variable POT NAV1 Analog
A6 NAV2 ADJUST Honeywell OEM Variable POT NAV2 Analog
A7 ADF1 ADJUST Honeywell OEM Variable POT ADF1 Analog
A8 DME1/2 ADJUST Honeywell OEM Variable POT DME1/2 Analog
A9 ID/VOICE ADJUST Honeywell OEM Variable POT ID/VOICE Analog
A10 SPEAKER ADJUST Honeywell OEM Variable POT SPEAKER Analog
A11 SIDETONE ADJUST Honeywell OEM Variable POT SIDETONE Analog
A12 MARKER ADJUST Honeywell OEM Variable POT MKR Analog
A13 MUTE ADJUST Honeywell OEM Variable POT MUTE Analog
A14 INTERPHONE ADJ Honeywell OEM Variable POT INPH Analog
A15 HEADPHONE ADJ Honeywell OEM Variable POT HEADPHONE Analog

NOTE: Pins A2 through A15 are analog pins which require 5V power

LEFT ACP RESET PLUG:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
RST RESET BUTTON BLK 12mm 4Pin Momentary L ACP N/A
13 REMOTE STATUS LED “ “ “ “ “ “ RED

NOTE: All Interface modules include a “RESET” plug which consist of a pin for a Remote
Reset Button and a pin for a Remote Status LED

01-01-2023 45 V2.19
 RIGHT ACP MODULE

RIGHT ACP MODULE

RESET
RST RST
GND GND USB
13
13
2.50"
26 22 25 29 30 49 53 50 47 44 A14 A10 A6 A2 A5 A9 A13 5V

26 22 25 29 30 49 53 50 47 44 A14 A10 A6 A2 A5 A9 A13 5V

24 23 27 31 GND GND 51 52 48 46 A12 A8 A4 A3 A7 A11 A15GND
23 27 31 GND GND 51 52 48 46 A12 A8 A4 A3 A7 A11 A15

A JET45 SYS v2.18 B C

3.50"

PLUG “A” RIGHT ACP (LEFT) BUTTONS:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
22 VHF1 TRANSMIT Honeywell OEM Latching VHF1 Push
23 VHF2 TRANSMIT Honeywell OEM Latching VHF2 Push
24 HF1 TRANSMIT Honeywell OEM Latching HF1 Push
25 VHF1 SELECT Honeywell OEM Latching VHF1 Push
27 VHF2 SELECT Honeywell OEM Latching VHF2 Push
28 HF1 SELECT Honeywell OEM Latching HF1 Push
29 NAV1 SELECT Honeywell OEM Latching NAV1 Push
30 NAV2 SELECT Honeywell OEM Latching NAV2 Push
31 ADF1 SELECT Honeywell OEM Latching ADF1 Push

01-01-2023 46 V2.19
PLUG “B” RIGHT ACP (RIGHT) BUTTONS:
PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
44 PA TRANSMIT Honeywell OEM Latching PA Push
46 EMER TRANSMIT Honeywell OEM Latching EMER Push
47 MIC/MASK SELECT Honeywell OEM Latching MIC/MASK Push
48 DME1/2 SELECT Honeywell OEM Latching DME1/2 Push
49 ID/VOICE SELECT Honeywell OEM Latching ID/VOICE Push
50 SIDETONE SELECT Honeywell OEM Latching SIDETONE Push
51 MARKER SELECT Honeywell OEM Latching MKR Push
52 MUTE LO/HI SENS Honeywell OEM Momentary MUTE Push
53 INTERPHONE SELECT Honeywell OEM Latching INPH Push

PLUG “C” RIGHT ACP ANALOG POTS:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
A2 VHF1 ADJUST Honeywell OEM Variable POT VHF1 Analog
A3 VHF2 ADJUST Honeywell OEM Variable POT VHF2 Analog
A4 HF1 ADJUST Honeywell OEM Variable POT HF1 Analog
A5 NAV1 ADJUST Honeywell OEM Variable POT NAV1 Analog
A6 NAV2 ADJUST Honeywell OEM Variable POT NAV2 Analog
A7 ADF1 ADJUST Honeywell OEM Variable POT ADF1 Analog
A8 DME1/2 ADJUST Honeywell OEM Variable POT DME1/2 Analog
A9 ID/VOICE ADJUST Honeywell OEM Variable POT ID/VOICE Analog
A10 SPEAKER ADJUST Honeywell OEM Variable POT SPEAKER Analog
A11 SIDETONE ADJUST Honeywell OEM Variable POT SIDETONE Analog
A12 MARKER ADJUST Honeywell OEM Variable POT MKR Analog
A13 MUTE ADJUST Honeywell OEM Variable POT MUTE Analog
A14 INTERPHONE ADJ Honeywell OEM Variable POT INPH Analog
A15 HEADPHONE ADJ Honeywell OEM Variable POT HEADPHONE Analog

NOTE: Pins A2 through A15 are analog pins which require 5V power

RIGHT ACP RESET PLUG:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
RST RESET BUTTON BLK 12mm 4Pin Momentary R ACP N/A
13 REMOTE STATUS LED “ “ “ “ “ “ RED

NOTE: All Interface modules include a “RESET” plug which consist of a pin for a Remote
Reset Button and a pin for a Remote Status LED

01-01-2023 47 V2.19
 HF RADIO MODULE

HF RADIO MODULE
5V 5V
DIN DIN
USB LOAD LOAD
CLK CLK
GND GND
RESET 18 A6 5V 9 7 GND GND 3
SPI DSP
5
1.75"
RST RST 18 A6 5V 9 7 GND GND 3 5
GND GND
13
13 A5 A7 GND 8 6 GND GND 2 4
A5 A7 GND 8 6 GND GND 2 4

JET45 SYS v2.18 A B C

2.50"

PLUG “A” HF RADIO ANALOG POTS:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
A5 CLARIFIER 531-PC16SC-1K Variable POT VHF1 Analog
A6 SQUELCH 531-PC16SC-1K Variable POT VHF1 Analog
A7 VOLUME T.B.D. Variable POT VOLUME Analog
18 VOLUME / OFF “ “ On/OFF OFF On/Off

PLUG “B” HF RADIO ENCODERS:

PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
6 OUTER INC EC11EBB24C03 Digital Inc None Encoder
7 OUTER DEC “ “ Digital Dec None Encoder
8 INNER INC “ “ Digital Inc None Encoder
9 INNER DEC “ “ Digital Dec None Encoder

01-01-2023 48 V2.19
PLUG “C” HF RADIO BUTTONS:
PIN DESCRIPTION SWITCH ACTION LEGEND TYPE
2 MODE T.B.D. Momentary MODE Push
3 FREQ/CHAN T.B.D. Latching FREQ/CHAN Push
4 STOW T.B.D. Momentary STO Push
5 PROGRAM T.B.D. Latching PGM Push

HF RADIO RESET PLUG:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
RST RESET BUTTON BLK 12mm 4Pin Momentary HF RADIO N/A
13 REMOTE STATUS LED “ “ “ “ “ “ RED

NOTE: All Interface modules include a “RESET” plug which consist of a pin for a Remote
Reset Button and a pin for a Remote Status LED

NOTE: The SPI Display is designed for a custom made eight digit, seven segment display
using a MAX2719CNG chip. This display will also handle the LSB, AM, USB, TX and PGM
indications.

Intentionally Left Blank

01-01-2023 49 V2.19
 16 RELAY MODULE

16 RELAY MODULE

RELAY MODULE
RESET
RST RST
GND GND USB
13
13
1.75"
2 4 6 8 10 12 14 16 RELAYS 15 13 11 9 7 5 3 1
2 3 4 5 6 7 8 9 GND GND 12 14 15 16 17 18 11 10
2 3 4 5 6 7 8 9 GND GND 12 14 15 16 17 18 11 10

A B JET45 SYS v2.18

2.50"

NOTE: The 16 Relay Module enables software simulation to physically control hardware
components within the cockpit, in most cases, hardware requiring 5v or 12v power.

01-01-2023 50 V2.19
PLUG “A” RELAY MODULE EVEN ROW:
PIN DESCRIPTION RELAY TRIGGER NOTES
2 LEFT ESS BUS 2 281C Monitor BATT, GEN, APU, EXT, TIE
3 RIGHT ESS BUS 4 281C Monitor BATT, GEN, APU, EXT, TIE
4 L NON ESS BUS 6 L NON ESS Monitor L NON ESS Switch
5 R NON ESS BUS 8 R NON ESS Monitor R NON ESS Switch
6 PACK AIR BLOWERS 10 PACK SWITCH Monitor L/R & APU BLEED AIR
7 RESERVED/SPARE 12 N/A N/A
8 RESERVED/SPARE 14 N/A N/A
9 EMER LIGHTING ARM 16 GEN FAIL Monitor for dual generator failure

PLUG “B” RELAY MODULE ODD ROW:

PIN DESCRIPTION RELAY TRIGGER NOTES
10 L STALL WARNING 1 036C Monitor Stall Warning status
11 R STALL WARNING 3 036C Monitor Stall Warning status
12 L REVRSE SOLENOID 15 SWITCH Monitor pin 49 on Pedestal Module
14 R REVRSE SOLENOID 13 SWITCH Monitor pin 50 on Pedestal Module
15 L CLOCK FLIGHT TIME 11 0366 Monitor Weight on Wheels status
16 R CLOCK FLIGHT TIME 9 0366 Monitor Weight on Wheels status
17 HOBBS FLIGHT TIME 7 0366 Monitor Weight on Wheels status
18 MANUAL TEMP (HEAT) 5 MAN TEMP Monitor L/R & APU BLEED AIR

16 RELAY RESET PLUG:

PIN DESCRIPTION SWITCH ACTION LEGEND COLOR
RST RESET BUTTON BLK 12mm 4Pin Momentary 16 RELAY N/A
13 REMOTE STATUS LED “ “ “ “ “ “ RED

NOTE: All Interface modules include a “RESET” plug which consist of a pin for a Remote
Reset Button and a pin for a Remote Status LED

01-01-2023 51 V2.19
 ADDITIONAL INFORMATION

NOTE: The information found in the following pages is NOT part of the Jet45 Advanced
Avionics Software or the Jet45 Systems Software. However, it has been specifically designed
to work in conjunction with the Jet45 software via two Leo Bodnar cards and a 16 channel
relay card.

Additionally, 30 individual Wiring Diagrams are included to help illustrate exactly how to
connect physical hardware to the dual 12 volt power system. All diagrams include either the
left side power supply flow or the right side power supply flow.

All diagrams include the single 16 channel Relay card. Not all buses are being utilized in
every diagram but are included to help provide the best illustration possible to show where the
power is coming from for each component.

Use the following information as a guide to help set up your Lear45 Simulator to your desired
level of physical hardware functionality!

WARNING: FOR FLIGHT SIMULATION USE ONLY!

Intentionally Left Blank

01-01-2023 52 V2.19
 FLIGHT CONTROLS 1 MODULE

FLT CTL 1 MODULE

USB 1.75"

LEO BODNAR BU0836A

3.35"

FLT CTRL 1 BU0836A:

ANALOG INPUT CHANEL ACTION NOTES
ROLL AXIS 1 POT Use FSUIPC to tune axis
PITCH AXIS 2 POT Use FSUIPC to tune axis
YAW AXIS 3 POT Use FSUIPC to tune axis
CAPT L BRAKE 4 POT Use FSUIPC to tune axis
CAPT R BRAKE 5 POT Use FSUIPC to tune axis

NOTE: The BU0836A by Leo Bodnar is one of the easiest, most reliable and affordable
interface module that has the ability to control potentiometers. The Lear45 simulator has
eleven axis that require pots, therefor, two interface cards are required.

NOTE: (Flight Controls require customized setup and calibrations via FSUIPC)

01-01-2023 53 V2.19
 FLIGHT CONTROLS 2 MODULE

FLT CTL 2 MODULE

USB 1.75"

LEO BODNAR BU0836A

3.35"

FLT CTRL 2 BU0836A:

ANALOG INPUT CHANEL ACTION NOTES
THROTTLE 1 1 POT Use FSUIPC to tune axis
THROTTLE 2 2 POT Use FSUIPC to tune axis
SPOILERS 3 POT Use FSUIPC to tune axis
FLAPS 4 POT Use FSUIPC to tune axis
FO L BRAKE 5 POT Use FSUIPC to tune axis
FO R BRAKE 6 POT Use FSUIPC to tune axis

NOTE: The BU0836A by Leo Bodnar is one of the easiest, most reliable and affordable
interface module that has the ability to control potentiometers. The Lear45 simulator has
eleven axis that require pots, therefor, two interface cards are required.

NOTE: (Flight Controls require customized setup and calibrations via FSUIPC)

01-01-2023 54 V2.19
 PHYSICAL HARDWARE

POWER SUPPLIES:
POWER SUPPLY V A POWERS NOTES
L PWR SUPPLY 12V 30A L ESS/NON ESS Replicates L MAIN BUSES
R PWR SUPPLY 12V 30A R ESS / NON ESS Replicates R MAIN BUSES

NOTE: Use Power supplies that have at least three power terminal and three Ground
terminals. Power supplies should be rated at a minimum of 30 amps each.

LEFT HOT BUS & EMER BATT BUS: (12V)

MECHANICAL / ELECTRICAL TRIGGER NOTES
EMERGENCY LIGHTING RELAY 16 Emergency Lighting in Cabin
L AVIONICS BAY FLOOD L FLOOD PWMS Left Bay RED Flood Lights
L AVIONICS BAYLIGHTS L AVIONICS PWMS Left Avionics Bay White Lights

NOTE: (Always powered) Use third set of terminals on the Left 12V Power Supply to
replicate LEFT HOT BUS and EMER BATT BUS. Most mid level 12 volt power supplies (30
amp or greater) have three 12 volt terminals and three ground terminals. (First set of
terminals for L ESS BUS, second set for L NON ESS BUS and third set for the L HOT BUS)

RIGHT HOT BUS: (12V)

MECHANICAL / ELECTRICAL TRIGGER NOTES
L CKPT OVHD LIGHT L OVRHD PWM COCKPIT switch at cabin door
R AVIONICS BAY FLOOD R FLOOD PWMS Right Bay RED Flood Lights
R AVIONICS BAYLIGHTS R AVIONICS PWMS Right Avionics Bay White Lights

NOTE: (Always powered) Use third set of terminals on the Right 12V Power Supply to
replicate the RIGHT HOT BUS. Most mid level 12 volt power supplies (30 amp or greater)
have three 12 volt terminals and three ground terminals. (First set of terminals for R ESS
BUS, second set for R NON ESS BUS and third set for the R HOT BUS)

01-01-2023 55 V2.19
LEFT ESSITIALS BUS: (RELAY 2)
MECHANICAL / ELECTRICAL TRIGGER NOTES
DU 1 AVIONICS FAN L AV MSTR Wire to L AV MSTR DP AML
DU 2 AVIONICS FAN L ESS PWR ON with Batteries or L ESS
L STALL WARNING RELAY 1 036C Activates L Stick Shaker
L REVERE SOLENOID RELAY 15 Monitor pin 49 on Ped Module
PACK AIR BLOWERS PACK SWITCH Additional Condition RELAY 10
L PEDAL AJUSTMENT L RUD PED MOM Toggle FWD and AFT
L DAVTRON CLOCK L ESS PWR CKPT INSTRS, (FT=RELAY 11)
HOBBS METER PANEL RELAY 7 CKPT INSTRS, Starts FT
LEFT LCU PANELS L INSTR PWM Via 12v to 5v Converter & L LCU
L CB PANEL LIGHTING L CB PANEL PWM Via 12v DC to 5v DC Converter
L CDU LCD SCREEN L CDU ON/OFF Via 12v DC (Dark startup screen)
SPARE N/A N/A

RIGHT ESSITIALS BUS: (RELAY 4)

MECHANICAL / ELECTRICAL TRIGGER NOTES
DU 3 AVIONICS FAN R AV MSTR Wire to R AV MSTR DP AML
DU 4 AVIONICS FAN R AV MSTR Wire to R AV MSTR DP AML
R STALL WARNING RELAY 3 036C Activates R Stick Shaker
R REVERE SOLENOID RELAY 13 Monitor pin 50 on PED Module
HEAT GENERATOR MAN TEMP Additional Condition RELAY 5
R PEDAL AJUSTMENT R RUD PED MOM Toggle FWD and AFT
R DAVTRON CLOCK R ESS PWR CKPT INSTRS, (FT=RELAY 9)
PITCH TRIM BIAS PITCH TRIM BIAS Adjust Pitch Trim with BIAS Toggle
RIGHT LCU PANELS R INSTR PWM Via 12v to 5v Converter & R LCU
R CB PANEL LIGHTING R CB PANEL PWM Via 12v DC to 5v DC Converter
R CDU LCD SCREEN R CDU ON/OFF Via 12v DC (Dark startup screen)
PED LCU PANELS PEDESTAL PWM Via 12 to 5v Converter & PED LCU

LEFT NON ESSITIALS BUS: (RELAY 6)

MECHANICAL / ELECTRICAL TRIGGER NOTES
CKPT MIP FLOOD LIGHT FLOOD PWM LED Tube Light above MIP
L/R SIDE MAP LIGHTS L/R MAP POTS Mounted on L/R Trim Panels
L CHART LIGHTS L CHART POT Mounted on L Yoke Chart Holder
L MIP USB SOCKETS N/A HOT if L NON ESS BUS powered
RESERVED/SPARE N/A N/A
RESERVED/SPARE N/A N/A

01-01-2023 56 V2.19
RIGHT NON ESSITIALS BUS: (RELAY 8)
MECHANICAL / ELECTRICAL TRIGGER NOTES
L CKPT OVHD LIGHT L OVHD PWM L OVHD LTS also on R HOT BUS
R CKPT OVHD LIGHT R OVHD PWM R OVHD LTS on R NON ESS only
R CHART LIGHTS R CHART POT Mounted on R Yoke Chart Holder
R MIP USB SOCKETS N/A HOT if L NON ESS BUS powered
PED USB SOCKETS N/A HOT if L NON ESS BUS powered
RESERVED/SPARE N/A N/A

12v DC to 5v DC CONVERTERS:
Three LCUs (Light Control Unit Modules) and two Circuit Break Panel Light Channels all
require 5v power. This is achieved by using a 12v DC to 5v DC converter which is connected
to the respective ESS BUS. Five of these converters are required to properly convert the
power down to 5 volts while maintaining the individual light channels. Refer to Wiring
Diagrams for more information as to how the converters are wired into the power supply
system. Below is an example of a DC power converter.

NOTE: All the PHYSICAL HARDWARE in the section is “optional” and is not required to set
up or operate the Jet45 AAS or Jet45 Systems Software. However, if your goal is to build a
high fidelity Lear45 home flight simulator, the hardware listed in this section will help get you
there.

01-01-2023 57 V2.19
 LEFT LCU MODULE

LEFT LCU MODULE

1 2 3 4 5 6 7 8 9 10 11 12

GND GND GND GND GND GND GND GND GND GND GND GND
5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V
1.75"
1 2 3 4 5 6 7 8 9 10 11 12
430
R1 430 D1 GND 5V
JET45 SYS v2.18 2A

3.00"

LEFT LIGHT CONTROL UNIT:

PLUG PANEL/GAUGE Ohm BULB TYPE NOTES
1 L DAVTRON CLOCK 0 Incandescent Use 5 volt M850 Version
2 L INCLINOMETER 300 LED w/ 430ohm Warm White Back lighting
3 L EFIS PANEL 300 LED w/ 430ohm Warm White Back lighting
4 FGC PANEL 300 LED w/ 430ohm Warm White Back lighting
5 DISPLAY UNIT 1 300 LED w/ 430ohm Warm White Back lighting
6 DISPLAY UNIT 2 300 LED w/ 430ohm Warm White Back lighting
7 LEFT CREW PANEL 300 LED w/ 430ohm Warm White Back lighting
8 ELECTRICAL PANEL 300 LED w/ 430ohm Warm White Back lighting
9 RMU 1 PANEL 300 LED w/ 430ohm Warm White Back lighting
10 LEFT ACP PANEL 300 LED w/ 430ohm Warm White Back lighting
11 LEFT REVERSION 402 LED w/ 430ohm Warm White Back lighting
12 LEFT AOA GUAGE 402 LED w/ 430ohm Warm White Back lighting

NOTE: The LEFT LCU (Light Control Unit Module) receives power from the LEFT CREW
LIGHTS INSTR PWM switch via a 12v DC to 5v DC converter which is connected to the LEFT
ESS BUS.

NOTE: Use in line resistor values from 0 to 430 ohms to adjust your back lighting intensity as
needed. The information list above serves as a great starting point.

01-01-2023 58 V2.19
 RIGHT LCU MODULE

RIGHT LCU MODULE

1 2 3 4 5 6 7 8 9 10 11 12

GND GND GND GND GND GND GND GND GND GND GND GND
5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V
1.75"
1 2 3 4 5 6 7 8 9 10 11 12
430
R1 430 D1 GND 5V
JET45 SYS v2.18 2A

3.00"

RIGHT LIGHT CONTROL UNIT:

PLUG PANEL/GAUGE Ohm BULB TYPE NOTES
1 R DAVTRON CLOCK 0 Incandescent Use 5 volt M850 Version
2 R INCLINOMETER 300 LED w/ 430ohm Warm White Back lighting
3 R EFIS PANEL 300 LED w/ 430ohm Warm White Back lighting
4 DISPLAY UNIT 3 300 LED w/ 430ohm Warm White Back lighting
5 DISPLAY UNIT 4 300 LED w/ 430ohm Warm White Back lighting
6 PRESSURE PANEL 300 LED w/ 430ohm Warm White Back lighting
7 ENVIRO PANEL 300 LED w/ 430ohm Warm White Back lighting
8 RMU 2 PANEL 300 LED w/ 430ohm Warm White Back lighting
9 RIGHT ACP PANEL 300 LED w/ 430ohm Warm White Back lighting
10 HSI GUAGE 402 LED w/ 430ohm Warm White Back lighting
11 RIGHT REVERSION 402 LED w/ 430ohm Warm White Back lighting
12 RIGHT AOA GUAGE 402 LED w/ 430ohm Warm White Back lighting

NOTE: The RIGHT LCU (Light Control Unit Module) receives power from the RIGHT CREW
LIGHTS INSTR PWM switch via a 12v DC to 5v DC converter which is connected to the
RIGHT ESS BUS.

NOTE: Use in line resistor values from 0 to 430 ohms to adjust your back lighting intensity as
needed. The information list above serves as a great starting point.

01-01-2023 59 V2.19
 PEDESTAL LCU MODULE

PEDESTAL LCU MODULE

1 2 3 4 5 6 7 8 9 10 11 12

GND GND GND GND GND GND GND GND GND GND GND GND
5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V
1.75"
1 2 3 4 5 6 7 8 9 10 11 12
430
R1 430 D1 GND 5V
JET45 SYS v2.18 2A

3.00"

PEDESTAL LIGHT CONTROL UNIT:

PLUG PANEL/GAUGE Ohm BULB TYPE NOTES
1 LEFT CDU / FMS 300 LED w/ 430ohm Warm White Back lighting
2 RIGHT CDU / FMS 300 LED w/ 430ohm Warm White Back lighting
3 TQ LIGHT PLATE 300 LED w/ 430ohm Warm White Back lighting
4 SYSTEM TEST PANEL 300 LED w/ 430ohm Warm White Back lighting
5 ENGINE PANEL 300 LED w/ 430ohm Warm White Back lighting
6 PITCH TRIM PANEL 300 LED w/ 430ohm Warm White Back lighting
7 APU PANEL 300 LED w/ 430ohm Warm White Back lighting
8 WX RADAR PANEL 300 LED w/ 430ohm Warm White Back lighting
9 HF RADIO PANEL 300 LED w/ 430ohm Warm White Back lighting
10 ELT PANEL 402 LED w/ 430ohm Warm White Back lighting
11 SEL CAL PANEL 402 LED w/ 430ohm Warm White Back lighting
12 AIRSHOW PANEL 402 LED w/ 430ohm Warm White Back lighting

NOTE: The Pedestal LCU (Light Control Unit Module) receives power from the PEDESTAL
CREW LIGHTS INSTR PWM switch via a 12v DC to 5v DC converter which is connected to
the RIGHT ESS BUS.

NOTE: Authentic CDUs (UNS-1) require the incandescent bulbs in the front panel to be
replaced with warm white SMD LEDs and 430ohm SMD resistors to prevent ghost signals!
Use in line resistor values from 0 to 430 ohms to adjust your back lighting intensity as
needed.

01-01-2023 60 V2.19
 WIRING DIAGRAMS
There are 30 diagrams covering all aspects of the dual 12 volt power system and it's
components. The LEFT OR RIGHT power components at the top of each drawing are
repeated in all the drawings. There is only one 16 channel relay module repeated in all 30
diagrams. Not all power components are utilized in each diagram but are included.

WIRING DIAGRAM LIST:

• COCKPIT OVRD LTS Page 62

• EMERGENCY LIGHTS Page 63
• MIP FLOOD LIGHT Page 64
• L/R MAP LIGHTS Page 65
• L AVIONICS BAY LTS Page 66
• R AVIONICS BAY LTS Page 67
• L CHART LIGHTS Page 68
• R CHART LIGHTS Page 69
• L CHRONOMETER Page 70
• R CHRONOMETER Page 71
• L CDU LCD SCREEN Page 72
• R CDU LCD SCREEN Page 73
• L LCU MODULE Page 74
• R LCU MODULE Page 75
• PED LCU MODULE Page 76
• L C.B. PANEL BL Page 77
• R C.B. PANEL BL Page 78
• HOBBS METER Page 79
• DU1/2 AVIONICS FANS Page 80
• DU3/4 AVIONICS FANS Page 81
• PACK AIR BLOWERS Page 82
• MANUAL TEMP (HEAT) Page 83
• L STALL WARNING Page 84
• R STALL WARNING Page 85
• L REVERSE SOLENOID Page 86
• R REVERSE SOLENOID Page 87
• L PEDAL ADJUSTMENT Page 88
• R PEDAL ADJUSTMENT Page 89
• PITCH TRIM BIAS Page 90
• PRI/SEC PITCH TRIM Page 91

01-01-2023 61 V2.19
 COCKPIT OVHD LTS DIAGRAM
120V AC INPUT
NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
WARNING K8= R NON ESS BUS Monitors R K16 K15 K14 K13 K12 K11 K10 K9
R BATT SWITCH EMER LT L REV SPARE R REV SPARE L CLK PACK R CLK
BATT,R GEN, APU, EXT & BUS-TIE ARM SOLND RELAY SOLND RELAY FT AIR FT
ON / OFF

RELAY MODULE
TO ARDUINO
16 RELAY MODULE
L STALL L ESS R STALL R ESS MAN L NON HOBBS R NON
WARN BUS WARN BUS TEMP ESS FT ESS
K1 K2 K3 K4 K5 K6 K7 K8
NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC

L
AC INPUT N

V- 2A 1A 1A 2A 2A 1A
PED LCU R CDU R CB R LCU PITCH R DVTN
R 12V POWER SUPPLY V- V- PNLS LCD PANEL PNLS BIAS CLOCK V+
V- R ESS BUS
V+ DU3 DU4 R STALL R REV HEAT R PED
AV FAN AV FAN WARN SOLND GEN ADJUST
V+
1A 1A 1A 1A 1A 2A
V+

CKPT LT @ L OVHD PWM R OVHD PWM

R HOT BUS CABIN DR
1A 1A 1A V+ L CKPT R BAY
SPARE
V-
OVHD LTS
PED R MIP
SPARE
USB USB 1A 1A 1A
V+ V- ON / OFF VAR SEL VAR SEL
R NON ESS V- V+ M+ M- V- V+ M+ M-
R CHRT L CKPT R CKPT
LTS OVHD OVHD
1A 1A 1A

IN5406 DIODES

V+ V- V+ V-

+ -

WEMAC WEMAC

DPDT RELAY

L COCKPIT OVHD LIGHT R COCKPIT OVHD LIGHT

NOT TO SCALE!

01-01-2023 62 V2.19
 EMERGENCY LIGHTS DIAGRAM
120V AC INPUT
NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
WARNING K16= EMER LIGHTS Monitors K16 K15 K14 K13 K12 K11 K10 K9
L BATT SWITCH EMER LT L REV SPARE R REV SPARE L CLK PACK R CLK
L&R GEN FAILURE ARM SOLND RELAY SOLND RELAY FT AIR FT

RELAY MODULE
ON / OFF

TO ARDUINO
16 RELAY MODULE
L STALL L ESS R STALL R ESS MAN L NON HOBBS R NON
WARN BUS WARN BUS TEMP ESS FT ESS
K1 K2 K3 K4 K5 K6 K7 K8
NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC

L
AC INPUT N

V- 1A 1A 1A 2A 1A 1A
L CDU L CB L LCU HOBBS L DVTN
SPARE
L 12V POWER SUPPLY V- V- LCD PANEL PNLS METER CLOCK V+
V- L ESS BUS
V+ DU1 DU2 L STALL L REV PACK L PED
AV FAN AV FAN WARN SOLND AIR ADJUST
V+
1A 1A 1A 1A 5A 2A
V+

L HOT BUS
1A 1A 1A V+ EMER L BAY
SPARE V-
LTS LTS
L MIP
SPARE SPARE
USB 1A 1A 1A
V+ V-
L NON ESS
L CHRT MAP MIP
EMER LIGHTS
LTS LTS FLOOD
1A 1A 1A + -

ON-OFF-ON

ON-ARM-OFF I/O
DPDT RELAY

EMERGENCY LIGHTS
CABIN OVHD LIGHTS CABIN FLOOR LIGHTS

V+ V+ V+ V+
V- V- V- V-

V- V-
V+ V+

NOT TO SCALE!

01-01-2023 63 V2.19
 MIP FLOOD LIGHT DIAGRAM
120V AC INPUT
NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
WARNING K6= L NON ESS BUS Monitors L K16 K15 K14 K13 K12 K11 K10 K9
L BATT SWITCH EMER LT L REV SPARE R REV SPARE L CLK PACK R CLK
BATT, L GEN, APU, EXT & BUS-TIE ARM SOLND RELAY SOLND RELAY FT AIR FT
ON / OFF

RELAY MODULE
TO ARDUINO
16 RELAY MODULE
L STALL L ESS R STALL R ESS MAN L NON HOBBS R NON
WARN BUS WARN BUS TEMP ESS FT ESS
K1 K2 K3 K4 K5 K6 K7 K8
NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC

L
AC INPUT N

V- 1A 1A 1A 2A 1A 1A
L CDU L CB L LCU HOBBS L DVTN
SPARE
L 12V POWER SUPPLY V- V- LCD PANEL PNLS METER CLOCK V+
V- L ESS BUS
V+ DU1 DU2 L STALL L REV PACK L PED
AV FAN AV FAN WARN SOLND AIR ADJUST
V+
1A 1A 1A 1A 5A 2A
V+

L HOT BUS
1A 1A 1A V+ EMER L BAY
SPARE V-
LTS LTS
L MIP
SPARE SPARE
USB 1A 1A 1A
V+ V-
L NON ESS FLOOD LIGHT PWM
L CHRT MAP MIP
LTS LTS FLOOD
1A 1A 1A

VAR SEL
V- V+ M+ M-

MIP FLOOD LIGHT

V+
V-

NOT TO SCALE!

01-01-2023 64 V2.19
 L/R MAP LIGHTS DIAGRAM
120V AC INPUT
NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
WARNING K6= L NON ESS BUS Monitors L K16 K15 K14 K13 K12 K11 K10 K9
L BATT SWITCH EMER LT L REV SPARE R REV SPARE L CLK PACK R CLK
BATT, L GEN, APU, EXT & BUS-TIE ARM SOLND RELAY SOLND RELAY FT AIR FT
ON / OFF

RELAY MODULE
TO ARDUINO
16 RELAY MODULE
L STALL L ESS R STALL R ESS MAN L NON HOBBS R NON
WARN BUS WARN BUS TEMP ESS FT ESS
K1 K2 K3 K4 K5 K6 K7 K8
NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC

L
AC INPUT N

V- 1A 1A 1A 2A 1A 1A
L CDU L CB L LCU HOBBS L DVTN
SPARE
L 12V POWER SUPPLY V- V- LCD PANEL PNLS METER CLOCK V+
V- L ESS BUS
V+ DU1 DU2 L STALL L REV PACK L PED
AV FAN AV FAN WARN SOLND AIR ADJUST
V+
1A 1A 1A 1A 5A 2A
V+

L HOT BUS
1A 1A 1A V+ EMER L BAY
SPARE V-
LTS LTS
L MIP
SPARE SPARE
USB 1A 1A 1A
V+ V-
L NON ESS
L CHRT MAP MIP
LTS LTS FLOOD
1A 1A 1A

V+ V-
L MAP LIGHT

PWM

V+ V-
R MAP LIGHT

PWM

NOT TO SCALE!

01-01-2023 65 V2.19
 L AVIONICS BAY LTS DIAGRAM
120V AC INPUT
NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
WARNING (NO RELAYS TRIGGERED) K16 K15 K14 K13 K12 K11 K10 K9
L BATT SWITCH EMER LT L REV SPARE R REV SPARE L CLK PACK R CLK
ARM SOLND RELAY SOLND RELAY FT AIR FT
ON / OFF

RELAY MODULE
TO ARDUINO
16 RELAY MODULE
L STALL L ESS R STALL R ESS MAN L NON HOBBS R NON
WARN BUS WARN BUS TEMP ESS FT ESS
K1 K2 K3 K4 K5 K6 K7 K8
NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC

L
AC INPUT N

V- 1A 1A 1A 2A 1A 1A
L CDU L CB L LCU HOBBS L DVTN
SPARE
L 12V POWER SUPPLY V- V- LCD PANEL PNLS METER CLOCK V+
V- L ESS BUS
V+ DU1 DU2 L STALL L REV PACK L PED
AV FAN AV FAN WARN SOLND AIR ADJUST
V+
1A 1A 1A 1A 5A 2A
V+

L HOT BUS
1A 1A 1A V+ EMER L BAY
SPARE V-
LTS LTS
L MIP
SPARE SPARE
USB 1A 1A 1A
V+ V-
L NON ESS
L CHRT MAP MIP
LTS LTS FLOOD
1A 1A 1A

L LIGHTS PWM L FLOOD PWM

VAR SEL VAR SEL

M- M+ V+ V- V- V+ M+ M-

L AVIONICS BAY LIGHTS L AVIONICS BAY FLOOD

V+ V+ V+
V- V- V-

V-
V+

NOT TO SCALE!

01-01-2023 66 V2.19
 R AVIONICS BAY LTS DIAGRAM
120V AC INPUT
NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
WARNING (NO RELAYS TRIGGERD) K16 K15 K14 K13 K12 K11 K10 K9
R BATT SWITCH EMER LT L REV SPARE R REV SPARE L CLK PACK R CLK
ARM SOLND RELAY SOLND RELAY FT AIR FT
ON / OFF

RELAY MODULE
TO ARDUINO
16 RELAY MODULE
L STALL L ESS R STALL R ESS MAN L NON HOBBS R NON
WARN BUS WARN BUS TEMP ESS FT ESS
K1 K2 K3 K4 K5 K6 K7 K8
NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC

L
AC INPUT N

V- 2A 1A 1A 2A 2A 1A
PED LCU R CDU R CB R LCU PITCH R DVTN
R 12V POWER SUPPLY V- V- PNLS LCD PANEL PNLS BIAS CLOCK V+
V- R ESS BUS
V+ DU3 DU4 R STALL R REV HEAT R PED
AV FAN AV FAN WARN SOLND GEN ADJUST
V+
1A 1A 1A 1A 1A 2A
V+

R HOT BUS
1A 1A 1A V+ L CKPT R BAY
SPARE V-
OVHD LTS
PED R MIP
SPARE
USB USB 1A 1A 1A
V+ V-
R NON ESS
R CHRT L CKPT R CKPT
LTS OVHD OVHD
1A 1A 1A

R LIGHTS PWM R FLOOD PWM

VAR SEL VAR SEL

M- M+ V+ V- V- V+ M+ M-

R AVIONICS BAY LIGHTS R AVIONICS BAY FLOOD

V+ V+ V+
V- V- V-

V-
V+

NOT TO SCALE!

01-01-2023 67 V2.19
 L CHART LIGHTS DIAGRAM
120V AC INPUT
NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
WARNING K6= L NON ESS BUS Monitors L K16 K15 K14 K13 K12 K11 K10 K9
L BATT SWITCH EMER LT L REV SPARE R REV SPARE L CLK PACK R CLK
BATT, L GEN, APU, EXT & BUS-TIE ARM SOLND RELAY SOLND RELAY FT AIR FT
ON / OFF

RELAY MODULE
TO ARDUINO
16 RELAY MODULE
L STALL L ESS R STALL R ESS MAN L NON HOBBS R NON
WARN BUS WARN BUS TEMP ESS FT ESS
K1 K2 K3 K4 K5 K6 K7 K8
NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC

L
AC INPUT N

V- 1A 1A 1A 2A 1A 1A
L CDU L CB L LCU HOBBS L DVTN
SPARE
L 12V POWER SUPPLY V- V- LCD PANEL PNLS METER CLOCK V+
V- L ESS BUS
V+ DU1 DU2 L STALL L REV PACK L PED
AV FAN AV FAN WARN SOLND AIR ADJUST
V+
1A 1A 1A 1A 5A 2A
V+

L HOT BUS
1A 1A 1A V+ EMER L BAY
SPARE V-
LTS LTS
L MIP
SPARE SPARE
USB 1A 1A 1A
V+ V-
L NON ESS
L CHRT MAP MIP
LTS LTS FLOOD
1A 1A 1A
L CHART HOLDER

V-
V+
PWM

NOT TO SCALE!

01-01-2023 68 V2.19
 R CHART LIGHTS DIAGRAM
120V AC INPUT
NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
WARNING K8= R NON ESS BUS Monitors R K16 K15 K14 K13 K12 K11 K10 K9
R BATT SWITCH EMER LT L REV SPARE R REV SPARE L CLK PACK R CLK
BATT, R GEN, APU, EXT & BUS-TIE ARM SOLND RELAY SOLND RELAY FT AIR FT
ON / OFF

RELAY MODULE
TO ARDUINO
16 RELAY MODULE
L STALL L ESS R STALL R ESS MAN L NON HOBBS R NON
WARN BUS WARN BUS TEMP ESS FT ESS
K1 K2 K3 K4 K5 K6 K7 K8
NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC

L
AC INPUT N

V- 2A 1A 1A 2A 2A 1A
PED LCU R CDU R CB R LCU PITCH R DVTN
R 12V POWER SUPPLY V- V- PNLS LCD PANEL PNLS BIAS CLOCK V+
V- R ESS BUS
V+ DU3 DU4 R STALL R REV HEAT R PED
AV FAN AV FAN WARN SOLND GEN ADJUST
V+
1A 1A 1A 1A 1A 2A
V+

R HOT BUS
1A 1A 1A V+ L CKPT R BAY
SPARE
V-
OVHD LTS
PED R MIP
SPARE
USB USB 1A 1A 1A
V+ V-
R NON ESS
R CHRT L CKPT R CKPT
LTS OVHD OVHD
1A 1A 1A
R CHART HOLDER

V-
V+
PWM

NOT TO SCALE!

01-01-2023 69 V2.19
 L CHRONOMETER DIAGRAM

120V AC INPUT
NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
WARNING K2= L ESS BUS Monitors L BATT, K16 K15 K14 K13 K12 K11 K10 K9
L BATT SWITCH EMER LT L REV SPARE R REV SPARE L CLK PACK R CLK
L GEN, APU, EXT and BUS-TIE ARM SOLND RELAY SOLND RELAY FT AIR FT

RELAY MODULE
ON / OFF

TO ARDUINO
K11= L Chronometer Monitors
FSUIPC offset 0366 (W.O.W.)
16 RELAY MODULE
L STALL L ESS R STALL R ESS MAN L NON HOBBS R NON
WARN BUS WARN BUS TEMP ESS FT ESS
K1 K2 K3 K4 K5 K6 K7 K8
NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC

L
AC INPUT N

V- 1A 1A 1A 2A 1A 1A
L CDU L CB L LCU HOBBS L DVTN
SPARE
L 12V POWER SUPPLY V- V- LCD PANEL PNLS METER CLOCK V+
V- L ESS BUS
V+ DU1 DU2 L STALL L REV PACK L PED
AV FAN AV FAN WARN SOLND AIR ADJUST
V+
1A 1A 1A 1A 5A 2A
V+

L HOT BUS
1A 1A 1A V+ EMER L BAY
SPARE
V-
LTS LTS
L MIP
SPARE SPARE
USB 1A 1A 1A
V+ V-
L NON ESS
L CHRT MAP MIP
50 ohm 10W RES
LTS LTS FLOOD
1A 1A 1A

L SONALERT CP-10 MEXICO 1022

9 8 7 6
5 4 3 2 1

CHRONOMETER

CLK PIN ASSIGNMENTS:

1 = GROUND
SELECT CONTROL
2 = 14 to 28 VOLTS, 2A (12V OK)
4 = START FLIGHT TIME GROUND
5 = ALARM OUT (AUDIO ALARM) DAV TRON
8 = DIMMING 28V @ 50MA (5V)
L CHRONOMETER
NOTE: DIM OPT AVL W/ CLK MOD
NOT TO SCALE!

01-01-2023 70 V2.19
 R CHRONOMETER DIAGRAM

120V AC INPUT
NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
WARNING K4= R ESS BUS Monitors R BATT, K16 K15 K14 K13 K12 K11 K10 K9
R BATT SWITCH EMER LT L REV SPARE R REV SPARE L CLK PACK R CLK
R GEN, APU, EXT and BUS-TIE ARM SOLND RELAY SOLND RELAY FT AIR FT

RELAY MODULE
ON / OFF

TO ARDUINO
K9= R Chronometer Monitors
FSUIPC offset 0366 (W.O.W.)
16 RELAY MODULE
L STALL L ESS R STALL R ESS MAN L NON HOBBS R NON
WARN BUS WARN BUS TEMP ESS FT ESS
K1 K2 K3 K4 K5 K6 K7 K8
NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC

L
AC INPUT N

V- 2A 1A 1A 2A 2A 1A
PED LCU R CDU R CB R LCU PITCH R DVTN
R 12V POWER SUPPLY V- V- PNLS LCD PANEL PNLS BIAS CLOCK V+
V- R ESS BUS
V+ DU3 DU4 R STALL R REV HEAT R PED
AV FAN AV FAN WARN SOLND GEN ADJUST
V+
1A 1A 1A 1A 1A 2A
V+

R HOT BUS
1A 1A 1A V+ L CKPT R BAY
SPARE V-
OVHD LTS
PED R MIP
SPARE
USB USB 1A 1A 1A
V+ V-
R NON ESS
R CHRT L CKPT R CKPT
50 ohm 10W RES
LTS OVHD OVHD
1A 1A 1A

R SONALERT CP-10 MEXICO 1022

9 8 7 6
5 4 3 2 1

CHRONOMETER

CLK PIN ASSIGNMENTS:

1 = GROUND
SELECT CONTROL
2 = 14 to 28 VOLTS, 2A (12V OK)
4 = START FLIGHT TIME GROUND
5 = ALARM OUT (AUDIO ALARM) DAV TRON
8 = DIMMING 28V @ 50MA (5V)
R CHRONOMETER
NOTE: DIM OPT AVL W/ CLK MOD
NOT TO SCALE!

01-01-2023 71 V2.19
 L CDU LCD SCREEN DIAGRAM
120V AC INPUT
NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
WARNING K2= L ESS BUS Monitors L BATT, K16 K15 K14 K13 K12 K11 K10 K9
L BATT SWITCH EMER LT L REV SPARE R REV SPARE L CLK PACK R CLK
L GEN, APU, EXT and BUS-TIE ARM SOLND RELAY SOLND RELAY FT AIR FT
ON / OFF

RELAY MODULE
TO ARDUINO
16 RELAY MODULE
L STALL L ESS R STALL R ESS MAN L NON HOBBS R NON
WARN BUS WARN BUS TEMP ESS FT ESS
K1 K2 K3 K4 K5 K6 K7 K8
NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC

L
AC INPUT N

V- 1A 1A 1A 2A 1A 1A
L CDU L CB L LCU HOBBS L DVTN
SPARE
L 12V POWER SUPPLY V- V- LCD PANEL PNLS METER CLOCK V+
V- L ESS BUS
V+ DU1 DU2 L STALL L REV PACK L PED
AV FAN AV FAN WARN SOLND AIR ADJUST
V+
1A 1A 1A 1A 5A 2A
V+

L HOT BUS
1A 1A 1A V+ EMER L BAY
SPARE V-
LTS LTS
L MIP
SPARE SPARE
USB 1A 1A 1A
V+ V-
L NON ESS
L CHRT MAP MIP
LTS LTS FLOOD
1A 1A 1A

L CDU LCD SCREEN

FMS1 DISPLAY

V-
V+

NOT TO SCALE!

01-01-2023 72 V2.19
 R CDU LCD SCREEN DIAGRAM
120V AC INPUT
NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
WARNING K4= R ESS BUS Monitors R BATT, K16 K15 K14 K13 K12 K11 K10 K9
R BATT SWITCH EMER LT L REV SPARE R REV SPARE L CLK PACK R CLK
R GEN, APU, EXT and BUS-TIE ARM SOLND RELAY SOLND RELAY FT AIR FT
ON / OFF

RELAY MODULE
TO ARDUINO
16 RELAY MODULE
L STALL L ESS R STALL R ESS MAN L NON HOBBS R NON
WARN BUS WARN BUS TEMP ESS FT ESS
K1 K2 K3 K4 K5 K6 K7 K8
NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC

L
AC INPUT N

V- 2A 1A 1A 2A 2A 1A
PED LCU R CDU R CB R LCU PITCH R DVTN
R 12V POWER SUPPLY V- V- PNLS LCD PANEL PNLS BIAS CLOCK V+
V- R ESS BUS
V+ DU3 DU4 R STALL R REV HEAT R PED
AV FAN AV FAN WARN SOLND GEN ADJUST
V+
1A 1A 1A 1A 1A 2A
V+

R HOT BUS
1A 1A 1A V+ L CKPT R BAY
SPARE
V-
OVHD LTS
PED R MIP
SPARE
USB USB 1A 1A 1A
V+ V-
R NON ESS
R CHRT L CKPT R CKPT
LTS OVHD OVHD
1A 1A 1A

R CDU LCD SCREEN

FMS2 DISPLAY

V-
V+

NOT TO SCALE!

01-01-2023 73 V2.19
 L LCU MODULE DIAGRAM
120V AC INPUT
NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
WARNING K2= L ESS BUS Monitors L BATT, K16 K15 K14 K13 K12 K11 K10 K9
L BATT SWITCH EMER LT L REV SPARE R REV SPARE L CLK PACK R CLK
L GEN, APU, EXT and BUS-TIE ARM SOLND RELAY SOLND RELAY FT AIR FT
ON / OFF

RELAY MODULE
TO ARDUINO
16 RELAY MODULE
L STALL L ESS R STALL R ESS MAN L NON HOBBS R NON
WARN BUS WARN BUS TEMP ESS FT ESS
K1 K2 K3 K4 K5 K6 K7 K8
NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC

L
AC INPUT N

V- 1A 1A 1A 2A 1A 1A
L CDU L CB L LCU HOBBS L DVTN
SPARE
L 12V POWER SUPPLY V- V- LCD PANEL PNLS METER CLOCK V+
V- L ESS BUS
V+ DU1 DU2 L STALL L REV PACK L PED
AV FAN AV FAN WARN SOLND AIR ADJUST
V+
1A 1A 1A 1A 5A 2A
V+

L HOT BUS
V+ EMER L BAY V- DC-DC CONVERTER
1A 1A 1A LTS LTS
SPARE
L MIP
SPARE SPARE
USB 1A 1A 1A
V+ V-
L NON ESS
L CHRT MAP MIP
LTS LTS FLOOD
1A 1A 1A 12v IN 5v OUT
+ - - +

L LCU MODULE

1 2 3 4 5 6 7 8 9 10 11 12 L INSTR PWM
GND GND GND GND GND GND GND GND GND GND GND GND
5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V

VAR SEL
M- M+ V+ V-

1 2 3 4 5 6 7 8 9 10 11 12
430
R1 D1 GND 5V
2A

NOT TO SCALE!

01-01-2023 74 V2.19
 R LCU MODULE DIAGRAM
120V AC INPUT
NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
WARNING K4= R ESS BUS Monitors R BATT, K16 K15 K14 K13 K12 K11 K10 K9
R BATT SWITCH EMER LT L REV SPARE R REV SPARE L CLK PACK R CLK
R GEN, APU, EXT and BUS-TIE ARM SOLND RELAY SOLND RELAY FT AIR FT

RELAY MODULE
ON / OFF

TO ARDUINO
16 RELAY MODULE
L STALL L ESS R STALL R ESS MAN L NON HOBBS R NON
WARN BUS WARN BUS TEMP ESS FT ESS
K1 K2 K3 K4 K5 K6 K7 K8
NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC

L
AC INPUT N

V- 2A 1A 1A 2A 2A 1A
PED LCU R CDU R CB R LCU PITCH R DVTN
R 12V POWER SUPPLY V- V- PNLS LCD PANEL PNLS BIAS CLOCK V+
V- R ESS BUS
V+ DU3 DU4 R STALL R REV HEAT R PED
AV FAN AV FAN WARN SOLND GEN ADJUST
V+
1A 1A 1A 1A 1A 2A
V+

R HOT BUS
V+ L CKPT R BAY V- DC-DC CONVERTER
1A 1A 1A OVHD LTS
SPARE
PED R MIP
SPARE
USB USB 1A 1A 1A
V+ V-
R NON ESS
R CHRT L CKPT R CKPT
LTS OVHD OVHD
1A 1A 1A 12v IN 5v OUT
+ - - +

R LCU MODULE

1 2 3 4 5 6 7 8 9 10 11 12 R INSTR PWM
GND GND GND GND GND GND GND GND GND GND GND GND
5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V

VAR SEL
M- M+ V+ V-

1 2 3 4 5 6 7 8 9 10 11 12
430
R1 D1 GND 5V
2A

NOT TO SCALE!

01-01-2023 75 V2.19
 PED LCU MODULE DIAGRAM
120V AC INPUT
NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
WARNING K4= R ESS BUS Monitors R BATT, K16 K15 K14 K13 K12 K11 K10 K9
R BATT SWITCH EMER LT L REV SPARE R REV SPARE L CLK PACK R CLK
R GEN, APU, EXT and BUS-TIE ARM SOLND RELAY SOLND RELAY FT AIR FT
ON / OFF

RELAY MODULE
TO ARDUINO
16 RELAY MODULE
L STALL L ESS R STALL R ESS MAN L NON HOBBS R NON
WARN BUS WARN BUS TEMP ESS FT ESS
K1 K2 K3 K4 K5 K6 K7 K8
NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC

L
AC INPUT N

V- 2A 1A 1A 2A 2A 1A
PED LCU R CDU R CB R LCU PITCH R DVTN
R 12V POWER SUPPLY V- V- PNLS LCD PANEL PNLS BIAS CLOCK V+
V- R ESS BUS
V+ DU3 DU4 R STALL R REV HEAT R PED
AV FAN AV FAN WARN SOLND GEN ADJUST
V+
1A 1A 1A 1A 1A 2A
V+

R HOT BUS
V+ L CKPT R BAY V- DC-DC CONVERTER
1A 1A 1A OVHD LTS
SPARE
PED R MIP
SPARE
USB USB 1A 1A 1A
V+ V-
R NON ESS
R CHRT L CKPT R CKPT
LTS OVHD OVHD
1A 1A 1A 12v IN 5v OUT
+ - - +

PED LCU MODULE

1 2 3 4 5 6 7 8 9 10 11 12 PED INSTR PWM

GND GND GND GND GND GND GND GND GND GND GND GND
5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V

VAR SEL
M- M+ V+ V-

1 2 3 4 5 6 7 8 9 10 11 12
430
R1 D1 GND 5V
2A

NOT TO SCALE!

01-01-2023 76 V2.19
 L C.B. PANEL BL DIAGRAM
120V AC INPUT
NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
WARNING K2= L ESS BUS Monitors L BATT, K16 K15 K14 K13 K12 K11 K10 K9
L BATT SWITCH EMER LT L REV SPARE R REV SPARE L CLK PACK R CLK
L GEN, APU, EXT and BUS-TIE ARM SOLND RELAY SOLND RELAY FT AIR FT
ON / OFF

RELAY MODULE
TO ARDUINO
16 RELAY MODULE
L STALL L ESS R STALL R ESS MAN L NON HOBBS R NON
WARN BUS WARN BUS TEMP ESS FT ESS
K1 K2 K3 K4 K5 K6 K7 K8
NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC

L
AC INPUT N

V- 1A 1A 1A 2A 1A 1A
L CDU L CB L LCU HOBBS L DVTN
SPARE
L 12V POWER SUPPLY V- V- LCD PANEL PNLS METER CLOCK V+
V- L ESS BUS
V+ DU1 DU2 L STALL L REV PACK L PED
AV FAN AV FAN WARN SOLND AIR ADJUST
V+
1A 1A 1A 1A 5A 2A
V+

L HOT BUS
V+ EMER L BAY V- DC-DC CONVERTER
1A 1A 1A LTS LTS
SPARE
L MIP
SPARE SPARE
USB 1A 1A 1A
V+ V-
L NON ESS
L CHRT MAP MIP
LTS LTS FLOOD
1A 1A 1A 12v IN 5v OUT
+ - - +

L CIRCUIT BREAKER PANEL

L C.B. PANEL PWM

VAR SEL
M- M+ V+ V-

V+ V- V+ V-

NOT TO SCALE!

01-01-2023 77 V2.19
 R C.B. PANEL BL DIAGRAM
120V AC INPUT
NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
WARNING K4= R ESS BUS Monitors R BATT, K16 K15 K14 K13 K12 K11 K10 K9
R BATT SWITCH EMER LT L REV SPARE R REV SPARE L CLK PACK R CLK
R GEN, APU, EXT and BUS-TIE ARM SOLND RELAY SOLND RELAY FT AIR FT
ON / OFF

RELAY MODULE
TO ARDUINO
16 RELAY MODULE
L STALL L ESS R STALL R ESS MAN L NON HOBBS R NON
WARN BUS WARN BUS TEMP ESS FT ESS
K1 K2 K3 K4 K5 K6 K7 K8
NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC

L
AC INPUT N

V- 2A 1A 1A 2A 2A 1A
PED LCU R CDU R CB R LCU PITCH R DVTN
R 12V POWER SUPPLY V- V- PNLS LCD PANEL PNLS BIAS CLOCK V+
V- R ESS BUS
V+ DU3 DU4 R STALL R REV HEAT R PED
AV FAN AV FAN WARN SOLND GEN ADJUST
V+
1A 1A 1A 1A 1A 2A
V+

R HOT BUS
V+ L CKPT R BAY V- DC-DC CONVERTER
1A 1A 1A OVHD LTS
SPARE
PED R MIP
SPARE
USB USB 1A 1A 1A
V+ V-
R NON ESS
R CHRT L CKPT R CKPT
LTS OVHD OVHD
1A 1A 1A 12v IN 5v OUT
+ - - +

R CIRCUIT BREAKER PANEL

R.C.B. PANEL PWM

VAR SEL
M- M+ V+ V-

V+ V- V+ V-

NOT TO SCALE!

01-01-2023 78 V2.19
 HOBBS METER DIAGRAM
120V AC INPUT
NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
WARNING K2= L ESS BUS Monitors L BATT, K16 K15 K14 K13 K12 K11 K10 K9
L BATT SWITCH EMER LT L REV SPARE R REV SPARE L CLK PACK R CLK
L GEN, APU, EXT and BUS-TIE ARM SOLND RELAY SOLND RELAY FT AIR FT
ON / OFF

RELAY MODULE
TO ARDUINO
K7= HOBBS METER Monitors
FSUIPC offset 0366 (W.O.W.) 16 RELAY MODULE
L STALL L ESS R STALL R ESS MAN L NON HOBBS R NON
WARN BUS WARN BUS TEMP ESS FT ESS
K1 K2 K3 K4 K5 K6 K7 K8
NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC

L
AC INPUT N

V- 1A 1A 1A 2A 1A 1A
L CDU L CB L LCU HOBBS L DVTN
SPARE
L 12V POWER SUPPLY V- V- LCD PANEL PNLS METER CLOCK V+
V- L ESS BUS
V+ DU1 DU2 L STALL L REV PACK L PED
AV FAN AV FAN WARN SOLND AIR ADJUST
V+
1A 1A 1A 1A 5A 2A
V+

L HOT BUS
1A 1A 1A V+ EMER L BAY
SPARE V-
LTS LTS
L MIP
SPARE SPARE
USB 1A 1A 1A
V+ V-
L NON ESS
L CHRT MAP MIP
LTS LTS FLOOD
1A 1A 1A

HOBBS METER

SYS 12-60 VDC

V-
V+

NOT TO SCALE!

01-01-2023 79 V2.19
 DU1/2 AVIONICS FANS DIAGRAM
120V AC INPUT
NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
WARNING K2= L ESS BUS Monitors L BATT, K16 K15 K14 K13 K12 K11 K10 K9
L BATT SWITCH EMER LT L REV SPARE R REV SPARE L CLK PACK R CLK
L GEN, APU, EXT and BUS-TIE ARM SOLND RELAY SOLND RELAY FT AIR FT
ON / OFF

RELAY MODULE
TO ARDUINO
16 RELAY MODULE
L STALL L ESS R STALL R ESS MAN L NON HOBBS R NON
WARN BUS WARN BUS TEMP ESS FT ESS
K1 K2 K3 K4 K5 K6 K7 K8
NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC

L
AC INPUT N

V- 1A 1A 1A 2A 1A 1A
L CDU L CB L LCU HOBBS L DVTN
SPARE
L 12V POWER SUPPLY V- V- LCD PANEL PNLS METER CLOCK V+
V- L ESS BUS
V+ DU1 DU2 L STALL L REV PACK L PED
AV FAN AV FAN WARN SOLND AIR ADJUST
V+
1A 1A 1A 1A 5A 2A
V+

L HOT BUS
1A 1A 1A V+ EMER L BAY
SPARE V- L AV MSTR
LTS LTS
L MIP
SPARE SPARE
USB 1A 1A 1A
V+ V- OFF
L NON ESS I/O
L CHRT MAP MIP
LTS LTS FLOOD
1A 1A 1A DU1 FAN PWM DU2 FAN PWM

SET @ 12v SET @ 11v

M- M+ V+ V- V- V+ M+ M-

DU1 AVIONICS FAN DU2 AVIONICS FAN

V+ V+
V- V-

NOT TO SCALE!

01-01-2023 80 V2.19
 DU3/4 AVIONICS FANS DIAGRAM
120V AC INPUT
NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
WARNING K4= R ESS BUS Monitors R BATT, K16 K15 K14 K13 K12 K11 K10 K9
R BATT SWITCH EMER LT L REV SPARE R REV SPARE L CLK PACK R CLK
R GEN, APU, EXT and BUS-TIE ARM SOLND RELAY SOLND RELAY FT AIR FT

RELAY MODULE
ON / OFF

TO ARDUINO
16 RELAY MODULE
L STALL L ESS R STALL R ESS MAN L NON HOBBS R NON
WARN BUS WARN BUS TEMP ESS FT ESS
K1 K2 K3 K4 K5 K6 K7 K8
NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC

L
AC INPUT N

V- 2A 1A 1A 2A 2A 1A
PED LCU R CDU R CB R LCU PITCH R DVTN
R 12V POWER SUPPLY V- V- PNLS LCD PANEL PNLS BIAS CLOCK V+
V- R ESS BUS
V+ DU3 DU4 R STALL R REV HEAT R PED
AV FAN AV FAN WARN SOLND GEN ADJUST
V+
1A 1A 1A 1A 1A 2A
V+

R HOT BUS
1A 1A 1A V+ L CKPT R BAY
SPARE V- R AV MSTR
OVHD LTS
PED R MIP
SPARE
USB USB 1A 1A 1A
V+ V- OFF
R NON ESS I/O
R CHRT L CKPT R CKPT
LTS OVHD OVHD
1A 1A 1A DU3 FAN PWM DU4 FAN PWM

SET @ 12v SET @ 11v

M- M+ V+ V- V- V+ M+ M-

DU3 AVIONICS FAN DU4 AVIONICS FAN

V+ V+
V- V-

NOT TO SCALE!

01-01-2023 81 V2.19
 PACK AIR BLOWERS DIAGRAM

120V AC INPUT
NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
WARNING K2= L ESS BUS Monitors L BATT, K16 K15 K14 K13 K12 K11 K10 K9
L BATT SWITCH EMER LT L REV SPARE R REV SPARE L CLK PACK R CLK
L GEN, APU, EXT and BUS-TIE ARM SOLND RELAY SOLND RELAY FT AIR FT

RELAY MODULE
ON / OFF

TO ARDUINO
K10= PACK AIR Monitors L/R
and APU BLEED AIR Systems
16 RELAY MODULE
L STALL L ESS R STALL R ESS MAN L NON HOBBS R NON
WARN BUS WARN BUS TEMP ESS FT ESS
K1 K2 K3 K4 K5 K6 K7 K8
NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC

L
AC INPUT N

V- 1A 1A 1A 2A 1A 1A
L CDU L CB L LCU HOBBS L DVTN
SPARE
L 12V POWER SUPPLY V- V- LCD PANEL PNLS METER CLOCK V+
V- L ESS BUS
V+ DU1 DU2 L STALL L REV PACK L PED
AV FAN AV FAN WARN SOLND AIR ADJUST
V+
1A 1A 1A 1A 5A 2A
V+

PACK
L HOT BUS
1A 1A 1A V+ EMER
LTS
L BAY
LTS
SPARE
V- OFF
SPARE SPARE
L MIP
1A 1A 1A I/O
USB
V+ V-
L NON ESS
L CHRT MAP MIP HI FLOW
LTS LTS FLOOD
1A 1A 1A
ON
I/O

L BLOWER PACK PWM HI FLOW PWM L BLOWER

ON / OFF SET @ 6v SET @ 9v ON / OFF

M- M+ V+ V- V- V+ M+ M-

+ -

V- V+
L BLOWER L BLOWER V+ V-

DPDT RELAY

NOT TO SCALE!

01-01-2023 82 V2.19
 MANUAL TEMP (HEAT) DIAGRAM
120V AC INPUT
NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
WARNING K4= R ESS BUS Monitors R BATT, K16 K15 K14 K13 K12 K11 K10 K9
R BATT SWITCH EMER LT L REV SPARE R REV SPARE L CLK PACK R CLK
R GEN, APU, EXT and BUS-TIE ARM SOLND RELAY SOLND RELAY FT AIR FT

RELAY MODULE
ON / OFF

TO ARDUINO
K5= MAN TEMP Monitors L/R
and APU BLEED AIR Systems 16 RELAY MODULE
L STALL L ESS R STALL R ESS MAN L NON HOBBS R NON
WARN BUS WARN BUS TEMP ESS FT ESS
K1 K2 K3 K4 K5 K6 K7 K8
NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC

L
AC INPUT N

V- 2A 1A 1A 2A 2A 1A
PED LCU R CDU R CB R LCU PITCH R DVTN
R 12V POWER SUPPLY V- V- PNLS LCD PANEL PNLS BIAS CLOCK V+
V- R ESS BUS
V+ DU3 DU4 R STALL R REV HEAT R PED
AV FAN AV FAN WARN SOLND GEN ADJUST
V+
1A 1A 1A 1A 1A 2A
V+

R HOT BUS MANUAL TEMP

1A 1A 1A V+ L CKPT R BAY
SPARE V-
PED R MIP
OVHD LTS
ON
SPARE 1A 1A 1A
V+ USB USB
V- I/O
R NON ESS
R CHRT L CKPT R CKPT
LTS OVHD OVHD
1A 1A 1A
COCKPIT
TEMPERATURE

HEAT GENERATOR

COLD HOT
OPTIONAL CTRL

INTERNAL
+ -
120V AC INPUT WIRING
WARNING

DPDT RELAY
SAFE SWITCH

NOT TO SCALE!

01-01-2023 83 V2.19
 L STALL WARNING DIAGRAM
120V AC INPUT
NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
WARNING K2= L ESS BUS Monitors L BATT, K16 K15 K14 K13 K12 K11 K10 K9
L BATT SWITCH EMER LT L REV SPARE R REV SPARE L CLK PACK R CLK
L GEN, APU, EXT and BUS-TIE ARM SOLND RELAY SOLND RELAY FT AIR FT
ON / OFF

RELAY MODULE
TO ARDUINO
K1= L STALL WARN Monitors
FSUIPC offset 036C 16 RELAY MODULE
L STALL L ESS R STALL R ESS MAN L NON HOBBS R NON
WARN BUS WARN BUS TEMP ESS FT ESS
K1 K2 K3 K4 K5 K6 K7 K8
NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC

L
AC INPUT N

V- 1A 1A 1A 2A 1A 1A
L CDU L CB L LCU HOBBS L DVTN
SPARE
L 12V POWER SUPPLY V- V- LCD PANEL PNLS METER CLOCK V+
V- L ESS BUS
V+ DU1 DU2 L STALL L REV PACK L PED
AV FAN AV FAN WARN SOLND AIR ADJUST
V+
1A 1A 1A 1A 5A 2A
V+

L HOT BUS
1A 1A 1A V+ EMER L BAY
SPARE V-
LTS LTS
L MIP
SPARE SPARE
USB 1A 1A 1A
V+ V-
L NON ESS
L CHRT MAP MIP
LTS LTS FLOOD
1A 1A 1A

L STICK SHAKER

35V
CAP
470uF

V-
V+

NOT TO SCALE!

01-01-2023 84 V2.19
 R STALL WARNING DIAGRAM
120V AC INPUT
NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
WARNING K4= R ESS BUS Monitors R BATT, K16 K15 K14 K13 K12 K11 K10 K9
R BATT SWITCH EMER LT L REV SPARE R REV SPARE L CLK PACK R CLK
R GEN, APU, EXT and BUS-TIE ARM SOLND RELAY SOLND RELAY FT AIR FT
ON / OFF

RELAY MODULE
TO ARDUINO
K3= R STALL WARN Monitors
FSUIPC offset 036C 16 RELAY MODULE
L STALL L ESS R STALL R ESS MAN L NON HOBBS R NON
WARN BUS WARN BUS TEMP ESS FT ESS
K1 K2 K3 K4 K5 K6 K7 K8
NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC

L
AC INPUT N

V- 2A 1A 1A 2A 2A 1A
PED LCU R CDU R CB R LCU PITCH R DVTN
R 12V POWER SUPPLY V- V- PNLS LCD PANEL PNLS BIAS CLOCK V+
V- R ESS BUS
V+ DU3 DU4 R STALL R REV HEAT R PED
AV FAN AV FAN WARN SOLND GEN ADJUST
V+
1A 1A 1A 1A 1A 2A
V+

R HOT BUS
1A 1A 1A V+ L CKPT R BAY
SPARE V-
OVHD LTS
PED R MIP
SPARE
USB USB 1A 1A 1A
V+ V-
R NON ESS
R CHRT L CKPT R CKPT
LTS OVHD OVHD
1A 1A 1A

R STICK SHAKER

35V
CAP
470uF

V-
V+

NOT TO SCALE!

01-01-2023 85 V2.19
 L REVERSE SOLENOID DIAGRAM
120V AC INPUT
NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
WARNING K2= L ESS BUS Monitors L BATT, K16 K15 K14 K13 K12 K11 K10 K9
L BATT SWITCH EMER LT L REV SPARE R REV SPARE L CLK PACK R CLK
L GEN, APU, EXT and BUS-TIE ARM SOLND RELAY SOLND RELAY FT AIR FT

RELAY MODULE
ON / OFF

TO ARDUINO
K15= L REV SOLENOID Monitors
Pin 49 on Pedestal Module 16 RELAY MODULE
L STALL L ESS R STALL R ESS MAN L NON HOBBS R NON
WARN BUS WARN BUS TEMP ESS FT ESS
K1 K2 K3 K4 K5 K6 K7 K8
NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC

L
AC INPUT N

V- 1A 1A 1A 2A 1A 1A
L CDU L CB L LCU HOBBS L DVTN
SPARE
L 12V POWER SUPPLY V- V- LCD PANEL PNLS METER CLOCK V+
V- L ESS BUS
V+ DU1 DU2 L STALL L REV PACK L PED
AV FAN AV FAN WARN SOLND AIR ADJUST
V+
1A 1A 1A 1A 5A 2A
V+

L HOT BUS
1A 1A 1A V+ EMER L BAY
SPARE V-
LTS LTS
L MIP
SPARE SPARE
USB 1A 1A 1A
V+ V-
L NON ESS
L CHRT MAP MIP
LTS LTS FLOOD
1A 1A 1A

L REVERSER SOLENOID

PULL
SOLENOID

V+
V-

NOT TO SCALE!

01-01-2023 86 V2.19
 R REVERSE SOLENOID DIAGRAM
120V AC INPUT
NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
WARNING K4= R ESS BUS Monitors R BATT, K16 K15 K14 K13 K12 K11 K10 K9
R BATT SWITCH EMER LT L REV SPARE R REV SPARE L CLK PACK R CLK
R GEN, APU, EXT and BUS-TIE ARM SOLND RELAY SOLND RELAY FT AIR FT

RELAY MODULE
ON / OFF

TO ARDUINO
K13= R REV SOLENOID Monitors
Pin 50 on Pedestal Module
16 RELAY MODULE
L STALL L ESS R STALL R ESS MAN L NON HOBBS R NON
WARN BUS WARN BUS TEMP ESS FT ESS
K1 K2 K3 K4 K5 K6 K7 K8
NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC

L
AC INPUT N

V- 2A 1A 1A 2A 2A 1A
PED LCU R CDU R CB R LCU PITCH R DVTN
R 12V POWER SUPPLY V- V- PNLS LCD PANEL PNLS BIAS CLOCK V+
V- R ESS BUS
V+ DU3 DU4 R STALL R REV HEAT R PED
AV FAN AV FAN WARN SOLND GEN ADJUST
V+
1A 1A 1A 1A 1A 2A
V+

R HOT BUS
1A 1A 1A V+ L CKPT R BAY
SPARE
V-
OVHD LTS
PED R MIP
SPARE
USB USB 1A 1A 1A
V+ V-
R NON ESS
R CHRT L CKPT R CKPT
LTS OVHD OVHD
1A 1A 1A

R REVERSER SOLENOID

PULL
SOLENOID

V+
V-

NOT TO SCALE!

01-01-2023 87 V2.19
 L PEDAL ADJUSTMENT DIAGRAM
120V AC INPUT
NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
WARNING K2= L ESS BUS Monitors L BATT, K16 K15 K14 K13 K12 K11 K10 K9
L BATT SWITCH EMER LT L REV SPARE R REV SPARE L CLK PACK R CLK
L GEN, APU, EXT and BUS-TIE ARM SOLND RELAY SOLND RELAY FT AIR FT
ON / OFF

RELAY MODULE
TO ARDUINO
16 RELAY MODULE
L STALL L ESS R STALL R ESS MAN L NON HOBBS R NON
WARN BUS WARN BUS TEMP ESS FT ESS
K1 K2 K3 K4 K5 K6 K7 K8
NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC

L
AC INPUT N

V- 1A 1A 1A 2A 1A 1A
L CDU L CB L LCU HOBBS L DVTN
SPARE
L 12V POWER SUPPLY V- V- LCD PANEL PNLS METER CLOCK V+
V- L ESS BUS
V+ DU1 DU2 L STALL L REV PACK L PED
AV FAN AV FAN WARN SOLND AIR ADJUST
V+
1A 1A 1A 1A 5A 2A
V+

L HOT BUS
1A 1A 1A V+ EMER L BAY
SPARE
V-
LTS LTS
L MIP
SPARE SPARE
USB 1A 1A 1A
V+ V-
L NON ESS
L CHRT MAP MIP
LTS LTS FLOOD
1A 1A 1A

L PEDAL ACUATOR
L PED ADJUST

(ON)OFF(ON)

V+
V-

+ - + -

DPDT RELAY DPDT RELAY

NOT TO SCALE!

01-01-2023 88 V2.19
 R PEDAL ADJUSTMENT DIAGRAM
120V AC INPUT
NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
WARNING K4= R ESS BUS Monitors R BATT, K16 K15 K14 K13 K12 K11 K10 K9
R BATT SWITCH EMER LT L REV SPARE R REV SPARE L CLK PACK R CLK
R GEN, APU, EXT and BUS-TIE ARM SOLND RELAY SOLND RELAY FT AIR FT
ON / OFF

RELAY MODULE
TO ARDUINO
16 RELAY MODULE
L STALL L ESS R STALL R ESS MAN L NON HOBBS R NON
WARN BUS WARN BUS TEMP ESS FT ESS
K1 K2 K3 K4 K5 K6 K7 K8
NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC

L
AC INPUT N

V- 2A 1A 1A 2A 2A 1A
PED LCU R CDU R CB R LCU PITCH R DVTN
R 12V POWER SUPPLY V- V- PNLS LCD PANEL PNLS BIAS CLOCK V+
V- R ESS BUS
V+ DU3 DU4 R STALL R REV HEAT R PED
AV FAN AV FAN WARN SOLND GEN ADJUST
V+
1A 1A 1A 1A 1A 2A
V+

R HOT BUS
1A 1A 1A V+ L CKPT R BAY
SPARE V-
OVHD LTS
PED R MIP
SPARE
USB USB 1A 1A 1A
V+ V-
R NON ESS
R CHRT L CKPT R CKPT
LTS OVHD OVHD
1A 1A 1A

R PEDAL ACUATOR
R PED ADJUST

(ON)OFF(ON)

V+
V-

+ - + -

DPDT RELAY DPDT RELAY

NOT TO SCALE!

01-01-2023 89 V2.19
 PITCH TRIM BIAS DIAGRAM
120V AC INPUT
NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
WARNING K4= R ESS BUS Monitors R BATT, K16 K15 K14 K13 K12 K11 K10 K9
R BATT SWITCH EMER LT L REV SPARE R REV SPARE L CLK PACK R CLK
R GEN, APU, EXT and BUS-TIE ARM SOLND RELAY SOLND RELAY FT AIR FT
ON / OFF

RELAY MODULE
TO ARDUINO
16 RELAY MODULE
L STALL L ESS R STALL R ESS MAN L NON HOBBS R NON
WARN BUS WARN BUS TEMP ESS FT ESS
K1 K2 K3 K4 K5 K6 K7 K8
NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC

L
AC INPUT N

V- 2A 1A 1A 2A 2A 1A
PED LCU R CDU R CB R LCU PITCH R DVTN
R 12V POWER SUPPLY V- V- PNLS LCD PANEL PNLS BIAS CLOCK V+
V- R ESS BUS
V+ DU3 DU4 R STALL R REV HEAT R PED
AV FAN AV FAN WARN SOLND GEN ADJUST
V+
1A 1A 1A 1A 1A 2A
V+

R HOT BUS
1A 1A 1A V+ L CKPT R BAY
SPARE
V-
OVHD LTS
PED R MIP
SPARE
USB USB 1A 1A 1A
V+ V-
R NON ESS
R CHRT L CKPT R CKPT
LTS OVHD OVHD
1A 1A 1A PITCH TRIM BIAS ACUATOR

PIT TRIM BIAS

(ON)OFF(ON)

V+
V-

+ - + -

DPDT RELAY DPDT RELAY

NOT TO SCALE!

01-01-2023 90 V2.19
 PRI/SEC PITCH TRIM DIAGRAM
120V AC INPUT
NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
WARNING (NO RELAYS TRIGGERED) K16 K15 K14 K13 K12 K11 K10 K9
L BATT SWITCH EMER LT L REV SPARE R REV SPARE L CLK PACK R CLK
ARM SOLND RELAY SOLND RELAY FT AIR FT
ON / OFF

RELAY MODULE
TO ARDUINO
(12V POWER NOT USED)
16 RELAY MODULE
L STALL L ESS R STALL R ESS MAN L NON HOBBS R NON
WARN BUS WARN BUS TEMP ESS FT ESS
K1 K2 K3 K4 K5 K6 K7 K8
NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC

L
AC INPUT N

V- 1A 1A 1A 2A 1A 1A
L CDU L CB L LCU HOBBS L DVTN
SPARE
L 12V POWER SUPPLY V- V- LCD PANEL PNLS METER CLOCK V+
V- L ESS BUS
V+ DU1 DU2 L STALL L REV PACK L PED
AV FAN AV FAN WARN SOLND AIR ADJUST
V+
1A 1A 1A 1A 5A 2A
V+

L HOT BUS
1A 1A 1A V+ EMER L BAY
SPARE V-
LTS LTS
L MIP
SPARE SPARE
USB 1A 1A 1A
V+ V-
L NON ESS
L CHRT MAP MIP
LTS LTS FLOOD
1A 1A 1A

CPT PRI TRIM FO PRI TRIM

PITCH SELECT

PRI ON

OFF OFF

SEC TRIM SEC ON

4 POLE

I/O I/O I/O I/O

NOT TO SCALE!

01-01-2023 91 V2.19
 TE CONNECTIVITY PINS & SOCKETS
Vertical Headers solder to the clad boards:
2 PIN VERTICAL HEADER MFG P/N: 1586037-2
4 PIN VERTICAL HEADER MFG P/N: 1586037-4
6 PIN VERTICAL HEADER MFG P/N: 1586037-6
8 PIN VERTICAL HEADER MFG P/N: 1586037-8
10 PIN VERTICAL HEADER MFG P/N: 1-1586037-0
12 PIN VERTICAL HEADER MFG P/N: 1-1586037-2
14 PIN VERTICAL HEADER MFG P/N: 1-1586037-4
16 PIN VERTICAL HEADER MFG P/N: 1-1586037-6

Receptacle Housings plug into the Vertical Headers:

2 PIN RECEPTACLE HOUSING MFG P/N: 794954-2
4 PIN RECEPTACLE HOUSING MFG P/N: 794954-4
6 PIN RECEPTACLE HOUSING MFG P/N: 794954-6
8 PIN RECEPTACLE HOUSING MFG P/N: 794954-8
10 PIN RECEPTACLE HOUSING MFG P/N: 1-794954-0
12 PIN RECEPTACLE HOUSING MFG P/N: 1-794954-2
14 PIN RECEPTACLE HOUSING MFG P/N: 1-794954-4
16 PIN RECEPTACLE HOUSING MFG P/N: 1-794954-6

Free Hanging Plugs used in wiring harnesses:

2 PIN FREE HANGING PLUG MFG P/N: 1586000-2
4 PIN FREE HANGING PLUG MFG P/N: 1586000-4
6 PIN FREE HANGING PLUG MFG P/N: 1586000-6
8 PIN FREE HANGING PLUG MFG P/N: 1586000-8
10 PIN FREE HANGING PLUG MFG P/N: 1-1586000-0
12 PIN FREE HANGING PLUG MFG P/N: 1-1586000-2
14 PIN FREE HANGING PLUG MFG P/N: 1-1586000-4
16 PIN FREE HANGING PLUG MFG P/N: 1-1586000-6

4.2mm Female Pins snap into Receptacle Housings:

Female 4.2mm Pin 22-18AWG MFG P/N: 1586315-1

4.2mm Male Pins snap into Free Hanging Plugs:

Male 4.2mm Pin 22-18AWG MFG P/N: 1586314-1

NOTE: All other single and double row pin headers are .1” or 2.54mm pitch

01-01-2023 92 V2.19
 CHANGE LOG:
V2.19 01-01-23:
• (ADDED PINS!) See below
• Added ROLL DISCONNECT pin 6 to Plug H on Pedestal Module
• Added System Test “OFF” pin 6 to Plug J on Left Panels Module
• Added three SPARE/TEST pins on the Left Panels Module
• Added two SPARE/TEST pins on the Right Panels Module
• Added two SPARE/TEST pins on the Pedestal Panels Module
• Added IC/SG NORMAL N/A position on Left Panels Module Plug L
• Added ADC NORMAL N/A position on Left Panels Module Plug L
• Added AHRS NORMAL N/A position on Left Panels Module Plug L
• Added DAU NORMAL N/A position on Left Panels Module Plug L
• Emergency Lights Toggle new terminal assignment update page 34
• Added [ ] to Left and Right START switches on Pedestal Panel Plugs
• Added N/A description lines for all 3 position toggles (center position)
• Added 12v to 5v converter for L,R & PED LCUs Relays not needed
• Reassigned Relay 10 as a condition for two PACK AIR BLOWERS
• Several MISC changes to L & R ESS, NON ESS and HOT BUSES
• Added several wiring diagram schematic illustration examples

V2.18 11-30-21:
• (PIN CHANGE!) Reset Pins on Large Panel modules now use pin13
• Replaced TFT Pressure display with OLED display page 31
• Reassigned Plugs G thru K on Right Panels Module page 31
• Added variable resistor pads R2/R3 to SCL and SDA Pressure display
• Added variable resistor pads R2/R3 to SCL and SDA CDR display
• Added 2A fuses & indicator LEDs to all LCU Modules pages 58-60
• Changed EMRG/NORM button description for CDR page 21
• Added SPARE indicator legend to CWP and pin B13 to Plug B
• Corrected CDU/FMS Back Lighting GND and 5V trace lines
• Pedestal LCU Module resistors updated for LED mod in the CDUs

V2.17 03-08-21:
• (NO NEW PIN ASSIGNMENTS)
• Updated Plug “D” pin locations in Illustrations DU1/EFIS1 & DU4/EFIS2
• Updated Change Log for 10-05-20 documenting pin changes!
• Changed NAV/LOGO Toggle back to ON-OFF-ON 1TL1-1 Toggle
• Added “Typical Wiring Colors” Illustration to page 3

01-01-2023 93 V2.19
V2.16 02-19-21:
• (NO NEW PIN ASSIGNMENTS)
• Added “Change Log” to last pages of this document!
• Added pin N/A to NAV/LOGO Lights Toggle, See NOTE page 33
• Emergency Lights Toggle explanation, See NOTE on page 34
• Added Emergency Lights pin N/A to represent “ON” toggle position
• Changed Emergency Lights Toggle to 2TL1-1P ON-OFF-ON double pole
• Changed several three position toggle legends to OFF to match switch POS
• Changed several three position toggles back to ON-OFF-ON single pole
• Added APU AMP Illustration to APU DISPLAY Illustration page 37
• Fix APU DISPLAY plug to match APU AMP pins!

V2.15 02-10-21:
• (NO NEW PIN ASSIGNMENTS)
• Completed Relay Module hardware logic and relay pin assignments
• Made adjustments to PWM pads to accept both authentic and knockoffs
• Added Physical Hardware Section documenting all possible options
• Added LCU (Light Control Units) documenting resistor values to panels
• Introducing the Avionics Bay DXF drawing and detailed Illustration!
• Added Flight Control Modules powered by two Leo Bodnar BU0836A cards
• Added “Additional Information” for items not related to pin assignments

V2.14 02-01-21:
• (NO NEW PIN ASSIGNMENTS)
• Changed name of Document to “Jet45 AAS/Systems Modules”
• Miscellaneous word and spelling corrections
• All modules now have a PCB version and are DipTrace ready
• All PCB modules also have a PCB Illustrations

V2.13 01-07-21:
• (NO NEW PIN ASSIGNMENTS)
• All DXF drawings are now drawn in layers in preparation for DipTrace.
• All Modules now have two basic dimensions for quick reference
• 16 Relay Arduino Module is complete and rough draft of pin assignments

01-01-2023 94 V2.19
V2.12 12-12-20:
• (NO NEW PIN ASSIGNMENTS)
• Resistor value for all Reset/Status LEDs changed to 430 ohms
• Resistor value for all other back lighting LEDs changed to 220 ohms

V2.11 10-26-20:
• (ADD PIN!) Add pin 33 to RMU1 for CDR back lighting
• Updated RMU1/CDR Module to accept new CDR v2.0 design
• CDR designed to use a 1.5” OLED display with five pin plug
• CDR designed with additional digit in COM freq line to replicate CD-850
• CDR designed to have working EMEG button
• CDR designed to have a working NAV AUDIO button
• CDR designed to be back lightable, TUNE and buttons
• CDR designed to have working SQUELCH button
• CDR designed to have AUDIO annunciation in display window
• CDR designed to have “TX” annunciation in display window
• CDR designed to have “SQ” annunciation in display window
• CDR designed to have EMEG annunciation in display window
• CDR designed for COM annunciation independent of COM arrow
• CDR designed for NAV annunciation independent of NAV arrow
• CDR designed for “1” in upper left corner indicates COM1/NAV1 only

V2.10 10-16-20:
• (PIN CHANGE!) WX Radar Module (Only two analog pins rather than four)
• Added first draft of the L and R Audio Control Panel Modules.
• Added first draft of the HF Radio module
• HF Radio 8 Digit 7 Segment Display made possible via MAX7219 chip

V2.09 10-05-20:
• (PIN CHANGE!) Reversed DU1/EFIS1 Pins 33 and 35 on Plug D
• (PIN CHANGE!) Reversed DU1/EFIS1 Pins 37 and 39 on Plug D
• (PIN CHANGE!) Reversed DU4/EFIS2 Pins 33 and 35 on Plug D
• (PIN CHANGE!) Reversed DU4/EFIS2 Pins 37 and 39 on Plug D
• All modules now have their own Reset Button/Status Indicator LEDs
• Pin 13 on smaller modules and pin 35 on larger modules are “Reset Pins”
• All unused pins within plugs are now common or ground pins
• Several modules have been reduced in size by as much as 25%

01-01-2023 95 V2.19
V2.08 09-14-20:
• (PIN CHANGE!) DU3 module pin assignments changed significantly
• Fixed DU3 Module no longer using D0 and D1
• DU3 moved from Nano to Mega due to additional MFD joystick pins
• Added illustration of Nano Module next to 16 Relay Module
• Added Reset/Status plug and resistor to DU3 module
• Added WX Radar Module first draft with isolated analog plug and pins

V2.07 09-11-20:
• (PIN CHANGE!) Changes to DU2 and DU3 modules
• No longer using analog pins A6 and A7 for digital pins with Nano
• Added CDR to RMU1 Module, now called RMU1/CDR Module
• New CDR only requires two plugs (PLUG C and I2C OLED PLUG)

V2.06 08-31-20:
• (PIN CHANGE!) Added R Landing and R Taxi Light pins 2 and 3 on R Module
• (PIN CHANGE!) Left Probes now pin 4 (was pin 3) on R Module
• Now pins 29 and 30 are exclusively L Landing and L Taxi Lights on R Module
• Removed RX1 pin to Pressure Window Plug G on R Module
• Added Isolated Nano Module for APU Display within PED Module

V2.05 08-14-20:
• (NO NEW PIN ASSIGNMENTS)
• Updated AOA DXF with new DMS-MG90-A 270 degree 4.8V micro servo
• Corrected minor spelling and grammar issues

V2.04 08-08-20:
• (NO NEW PIN ASSIGNMENTS)
• Changed all analog pin numbers to digital pin numbers (i.e A3 to D17)
• Removed the “D” designation from digital pins (i.e D17 to 17)

01-01-2023 96 V2.19
V2.03 07-20-20:
• (PIN CHANGE!) DU2 Module reworked including two new pins
• (PIN CHANGE!) DU3 Module added MFD Joystick pins and plug
• (PIN CHANGE!) WX Radar Module reworked, smaller footprint
• DU2, DU3 and WX Radar all use pins 11 and 12 for LED indications
• Changed name of Document to “Jet45 Hardware Pinout”
• Changed name of DXF drawing to “Jet45 Interface Modules”
• Moved Jet45 AAS Modules up and Jet45 Systems Modules down in doc
• Added additional information on the Meduino Mega2560 Mini Pro
• Added additional information on larger 16 Channel 12-bit PWM LED Drivers

V2.02 07-14-20:
• (PIN CHANGE!) Mute & Go AROUND pins moved from FGC to PED Module
• (PIN CHANGE!) Added Overhead Compass Servo pins to the FGC Module
• (PIN CHANGE!) Minor adjustments in pin assignments in three Mega Modules
• All three Mega Modules are 3 square inches smaller in size
• All three Mega Modules can now be cut on a 6x8 piece of clad
• All Plug assignments are from left to right, top to bottom, (i.e A,B,C, etc...)

V2.01 06-05-20:
• Refining the Master Interface Plan
• Selecting and confirming all flight deck hardware
• Confirming several hardware part numbers
• Developing single sided trace lines for clad prototyping

V2.00 04-04-20:
• Master Interface Concept 1: Highly detailed and feature rich Lear45 simulation!
• Master Interface Concept 2: Simple “Plug and Play” solution! No code writing!
• Master Interface Concept 3 Exclusive use of Arduino interface modules!
• Master Interface Concept 4: Low cost, easy to find interface, parts & hardware!
• Master Interface Concept 5: DXF Drawings and G Code for all panels available!

JET45 AAS / SYSTEMS MODULES concept by Jason Hite

Document content, Hardware Logic and Illustrations by Ron Rollo

01-01-2023 97 V2.19