FUTURA MAX

... for extreme temperatures -40 °C to +70 °C.

USE ADVANTAGES
The light fitting is suitable for indoor and outdoor • Light fitting protection IP66 • Up to 45 % lower electricity consumption when
spaces with roof with extreme ambient tempera- • Minimum ambient temperature up to ta = -40 °C compared to tubes T5
tures from (-40 °C to +70 °C). The light fitting is • Maximum ambient temperature up to ta = 70 °C • Constant luminous flux even in ambient tem-
destined mainly for heating stations, metallurgi- • Lifetime: 50,000 hours / L80B10 perature of -40 °C
cal lines, glass-works, as well as for freezers, • Possibility of using in even higher ambient • Standard model - CRI > 80: 4000 K
cooling plants and other premises without dan- temperatures under the condition of a short- •A  t request CRI > 80: 3000 K, 5000 K
ger of explosion of gases, dusts and flammable ened service life of the light fitting – param- •T  hrough-wiring of up to 10 wires at body
vapors. eters solved within a particular project •C  ertification: HACCP
• Diffuser: translucent polycarbonate (PC) = high
The light fitting is resistant to dust, moisture and mechanical resistance
spouting water. The body and the diffuser made • Body: grey polycarbonate with Al coolers
of polycarbonate (PC) have the increased resist- (PC Al) = high mechanical resistance
ance against deformation and impact.

(It is necessary to consider exhalation in the air

which can reduce the usability of the plastic and
aluminium at installations in an aggressive envi-
ronment, see also page 367). up to up to
LED
70ºC -40ºC

CRI
220-240 V L 80
>80 B 10

HACCP

164
 FUTURA MAX PCc Al

FUTURA MAX PCc Al

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 •R  eflector: steel sheet, white colour (RAL 9003)
• Minimum ambient temperature: ta = -40 °C • Ventilation plug: type BVPB-01 made of polyam-
• Maximum ambient temperature: ta = 70 °C ide, size M12 × 1.5
• Lifetime: 50,000 hours / L80B10 •C  lips: stainless steel + polyamide
• Possibility of using in even higher ambient tem- • Sealing: polyurethane (PUR), foamed body
peratures under the condition of a shortened groove
service life of the light fitting – parameters •C  able glands: screwed PG 13.5
solved within a particular project •D  istance part: polyamide + 10 % glass fibre
• Maximum system efficacy: 164 lm/W • Terminal block: screwless, three-pole (basic
• The watt and lumen values can vary by ± 7,5 % version)
• Standard model - CRI > 80: 4000 K • Installation: package contains stainless hooks
• MacAdam = 3 SDCM and stainless brackets
• Diffuser: translucent polycarbonate (PC), UV • Electric equipment: LED modules, current
stable, impact-resistant driver
• Body: grey polycarbonate with Al coolers (PC
Al), UV stable, impact-resistant

FUTURA MAX 2.4ft

150° 180° 150°

A
120° 120°
D 145

90° 90°

112
100
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System UGR Net
A D
Type temperature of LED modules of light fitting consumption efficacy Longitudinal/ weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] transverse [kg]
For ambient temperature ta = 70 °C - body: grey polycarbonate with Al coolers - diffuser: translucent polycarbonate
FUTURA 1.5ft MAX PCc Al 4000/840 70 3850 3620 23,3 155 21.5 / 19.9 3,05 1452 940
FUTURA 1.5ft MAX PCc Al 5500/840 65 5340 5020 31,9 157 22.7 / 21.0 3,05 1452 940
FUTURA 2.4ft MAX PCc Al 6400/840 65 6240 5870 36,3 162 24.0 / 22.2 2,65 1172 700
FUTURA 2.4ft MAX PCc Al 8800/840 60 8690 8170 49,7 164 25.1 / 23.3 2,65 1172 700
FUTURA 2.5ft MAX PCc Al 8000/840 65 7770 7300 44,4 164 24.0 / 22.3 3,15 1452 940
FUTURA 2.5ft MAX PCc Al 11000/840 60 12310 11570 71,1 163 25.6 / 23.9 3,15 1452 940

FUTURA MAX PCc Al Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h DALI DALI 3F

79820 FUTURA 1.5ft MAX PCc Al 4000/840 79821 79823 x x 79825 79826
79830 FUTURA 1.5ft MAX PCc Al 5500/840 79831 79833 x x 79835 79836
79840 FUTURA 2.4ft MAX PCc Al 6400/840 79841 79843 x x 79845 79846
79800 FUTURA 2.4ft MAX PCc Al 8800/840 79801 79803 x x 79805 79806
79850 FUTURA 2.5ft MAX PCc Al 8000/840 79851 79853 x x 79855 79856
79810 FUTURA 2.5ft MAX PCc Al 11000/840 79811 79813 x x 79815 79816

Example of type marking: 79813 = FUTURA MAX 2.5ft PCc Al 11000/840 3F

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

CZECH LED LUMINAIRES 165

 FUTURA MAX PCc Al

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) Attachment with the use of side hangers to the wall - is not included in accessories

LIGHT FITTING DETAILED VIEW

FUTURA MAX

166