Scribd
Upload
551 views

User Manual For Solarman Smart APP (End User)

This user manual provides instructions for downloading and using the SOLARMAN Smart app. It explains how to register an account, create a plant profile, add a data logger device by scanning its QR code or serial number, and configure the device's wireless network settings by connecting to its access point and allowing automatic configuration. Notices provide tips on finding the logger's serial number and access point password and troubleshooting configuration issues.

Uploaded by

haryono4525
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
551 views

User Manual For Solarman Smart APP (End User)

This user manual provides instructions for downloading and using the SOLARMAN Smart app. It explains how to register an account, create a plant profile, add a data logger device by scanning its QR code or serial number, and configure the device's wireless network settings by connecting to its access point and allowing automatic configuration. Notices provide tips on finding the logger's serial number and access point password and troubleshooting configuration issues.

Uploaded by

haryono4525
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

User Manual for "SOLARMAN Smart" APP

(for End User)

1. APP Download
Go to "Google Play"(Android Phone) or "App Store"(iPhone) and search "SOLARMAN Smart".

2. Registration
Go to "SOLARMAN Smart" and register.
Click "Register" and create your account here.

1
3. Create a Plant
Step 1) Click "Add Now" to create your plant.
Step 2) Please fill required info for the plant.

4. Add a Data Logger


Option 1) Click "[-]" and scan the QR code of data logger.
Option 2) Click "+" and select "Add a Device".

Notice:
You can find logger SN in the external packaging or on the logger body.

2
5. Network Configuration
Go to "Plant Details" - "Device List" and find the target SN and click "Networking".

Step 1) Confirm Wi-Fi Info


Please make sure your phone has connected to the right WiFi network. And click "Start to configure".

Notice:
5G Wi-Fi is not supported.

3
Step 2) Connect to AP network
Click "Go to connect" and find the right "AP_XXXXX" network (XXXXX refers to logger SN).
Go back to "SOLARMAN Smart APP", after connecting to AP network.

Notice:
If the password is required, you can find the password on the logger body.

4
Step 3) Auto Configuration
Please wait for a while to complete the configuration. Then system will switch to the following page.
Click "Done" to check plant data(Usually, the data will be updated in 10 mins).

If configuration fails, please check the following reason and try it again.
1) Make sure WLAN is ON.
2) Make sure WiFi is normal.
3) Make sure wireless router does not implement the white-black list.
4) Remove the special characters in Wi-Fi network.
5) Shorten the distance between the phone and device.
6) Try to connect to other Wi-Fi.

You might also like