F 1.

02,
0.56,
2.09,
0.69,
What is Digital Signal Processing ?
-0.95

100001101101111100………

101101001101001100………

The representation of signals in terms of sequences of

digital numbers and the use of digital computers to
process these signals to either analyze or modify the
original signal is termed as Digital Signal Processing
and in short DSP.

2
F
Digital Signal Processing System
1.02,
0.56,
2.09,
0.69,
-0.95

A/D D/A
A/D
Converter Converter

Signal Processing Actuators

Sensors

Analog signals are the most popular signals used for

DSP, which are discretized by sampling at regular
intervals and converted into a digital format for
processing.

3
F
Advantages of DSP
1.02,
0.56,
2.09,
0.69,
-0.95

• Guaranteed Accuracy ( determined by the number of bits )

• Superior Performance ( Than analog signal processing )

• Perfect Reproducibility ( no variations due to component tolerances )

• No Drift in performance with temperature & age
• Greater Flexibility ( wider applications with minimal changes in
hardware )

• Immunity from Noise

4
F
Disadvantages of DSP
1.02,
0.56,
2.09,
0.69,
-0.95

• Speed : The speed at which DSP takes place is still in the

100MHz range which means that signals having a
very large frequency component in them are not
suitable for DSP applications.
• Finite Word-length : In some real time simulations, cost
considerations limit the DSP implementation with
fewer number of bits which may create
degradation in system performance.

5
F
Applications of DSP
1.02,
0.56,
2.09,
0.69,
-0.95

• Communication Systems
• Speech & Music Processing.
• Image Processing
• Medical Imaging
• Biomedical Signal Processing
• High speed Modems
• Closed Loop Control systems
• Radar/Sonar signal analysis
• Real Time Measurement & Instrumentation
6
F
Applications contd..
1.02,
0.56,
2.09,
0.69,
-0.95

7
F 1.02,
0.56,

Applications contd..
2.09,
0.69,
-0.95

• Given the advent of DSP chips, DSP technology can now

be found in such devices as mobile phones, multimedia
computers, video recorders, CD players, hard disc drive
controllers and modems. It will soon even replace analog
circuitry in TV sets and telephones. Most of these practical
applications exploit two key attributes of DSP technology:
signal compression/ decompression and real-time operation.

• Signal compression and decompression is used in a

variety of applications. In CD systems, for example, the
music recorded on the CD is in a compressed form (to
increase storage capacity). It must be decompressed in
order for the recorded signal to be reproduced.
8
F 1.02,
0.56,
2.09,

Applications contd..
0.69,
-0.95

DSP technology enables the signal to be compressed

and decompressed resulting in a cleaner, crisper signal.
• Signal compression is also used in digital cellular
phones to allow a greater number of calls to be handled
simultaneously within each local "cell". This
compression technology allows people not only to talk
to one another by telephone but also to see one another
on the screens of their PCs, using small video cameras
mounted on the computer monitors, with only a
conventional telephone line linking them together.

9
F 1.02,
0.56,
2.09,

Applications contd..
0.69,
-0.95

• The architecture of a DSP chip is designed to carry out

complex mathematical operations incredibly fast, processing
up to tens of millions of samples per second, to provide real-
time performance. The real-time performance results from
the ability to process a signal "live" as it is sampled and then
output the processed signal, for example to a loudspeaker or
video display. Most of the practical examples of DSP
applications, such as hard disc drives and mobile phones,
demand real-time operation.

10
F
Example
1.02,
0.56,
2.09,
0.69,
-0.95

Application of DSP to recover damaged sound tracks :

Sampled Voice of Darth Vader from ‘Empire Strikes
Back’ Saying “ Don’t Fail me again ”.
Noisy Sound

11
F
Example Contd..
1.02,
0.56,
2.09,
0.69,
-0.95

Typically Sounds recorded prior to 1980 were all in analog

format, because of which, due to age and wear of the
recorded medium, there is a distinguishable loss in quality
of sound. Now in-order to recover back as much as the
original sound as possible we convert the noisy sound into a
digital format and apply DSP techniques for removal of
noise. After Removal of Noise ;
Sound after removal of Noise

Here we
could
clearly
notice the
effect of
filtering

12
F
Example Contd..
1.02,
0.56,
2.09,
0.69,
-0.95

Another Sound clip from the movie Return of the Jedi :

Here we can clearly hear the noise which has crept in

to the original soundtrack. Now we process this signal
using DSP techniques to get rid of the noise.

We can clearly notice a marked change in quality of the

sound after processing the signal.

13
F
How are we Achieving this ?
1.02,
0.56,
2.09,
0.69,
-0.95

Most of the energy in Speech Signals lies in the frequency

band of 0 - 3000 Hz. Utilizing this fact we design a digital
filter to remove of all the high frequency components in
the signal of our interest, thus eliminating the unwanted
noise.
Filter
Specification

Filter

14
F
Another Example
1.02,
0.56,
2.09,
0.69,
-0.95

For Easy Visualization purposes let’s consider a

simple sine wave corrupted with noise.
Lets consider a simple 50Hz signal.
Original Signal
1
<-- Magnitude -->

0.5

-0.5

-1
0 200 400 600 800 1000 1200
<-- Time -->
Noisy Signal
2
<-- Magnitude -->

-1
0 200 400 600 800 1000 1200
<-- Time -->

15
F
Example Contd..
1.02,
0.56,
2.09,
0.69,
-0.95

Passing the noisy signal through a Digital filter to

remove the noisy portions of the signal.
Original Signal
1
<-- Magnitude -->

0.5

-0.5

-1
0 200 400 600 800 1000 1200
<-- Time -->
Filtered Signal
2
<-- Magnitude -->

-1
0 200 400 600 800 1000 1200
<-- Time -->

16
F 1.02,
0.56,
2.09,
0.69,
An Example of DSP in
-0.95

Image Processing
Use of DSP techniques for Zooming instead of
using expensive & bulky Zoom Lens

Camcorders use DSP Techniques to achieve a greater zoom then

that available on the camera lens. Although this technique
deteriorates the image quality at very high zoom factors, but
when compared to the cost & weight of lens required for that
zoom factor, the cost & weight of the DSP chip used for this
application is very marginal.

17
F 1.02,
0.56,
2.09,
0.69,
Image Processing Example
-0.95

Zooming onto the area shown

In this technique the existing

data is interpolated to get the
new zoomed in version of the
image. This example would
compare with the process of
up-sampling of 1-dimensional
signals.

18
F 1.02,
0.56,
2.09,
0.69,
How is that done ?
-0.95

Every Image is represented by points known as pixels,

each pixel has three values ranging from 0 - 1 for each
of the three primary colors “RGB”, for a color image
and only by a single value for a Black & White image.
Now when an image is zoomed in by a certain factor
no new information is added in rather the existing
information of the pixels present in the area of interest
are replicated by the zoom factor to give us the
zoomed version of the image.

19
 F 1.02,

Analog I/O interface for real-time DSP systems

0.56,
2.09,
0.69,
-0.95

The real-world signals are usually in analog form,

the interface Converts the analog signal into a digital one,
the following block Diagram shows the place of the interface in a
real system.

Typical real-time DSP system

20
 F 1.02,
0.56,
2.09,
Steps involved,
0.69,
-0.95

•The analog input filter limits the bandwidth of the analog input
signal.

•The ADC converts the analog input signal into digital form, for
wide band signals ADC is preceded by a sample and hold circuit.

•Digital processor is at the heart of the system, it implements

various DSP algorithms. Motorola’s MC68000 , DSP56000 and
Texas Instrument’s TMS320C50 are popular Digital processors.

•DAC converts the processed digital data into analog form,

followed by an analog filter to give the final output.

21
 F 1.02,
0.56,
2.09,
ADC: Analog-to-digital conversion
0.69,
-0.95

1.The analog signal is converted into a discrete-time

continuous amplitude signal through sampling.
2.The amplitude of each signal sample is quantized into one
Of the 2B levels, where B is the number of bits used to represent
A sample in the ADC.
3.The discrete amplitude levels are encoded into distinct binary
Words of length B bits.
22