Scribd
Upload
105 views2 pages

SKF LGMT 2

Uploaded by

muhammad saputra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
105 views2 pages

SKF LGMT 2

Uploaded by

muhammad saputra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

SKF Bearing Grease

General purpose industrial and


automotive bearing grease

LGMT 2

SKF LGMT 2 is mineral oil based, lithium soap thickened grease with excellent
thermal stability within its operating temperature range. This premium quality,
general purpose grease is suitable for a wide range of industrial and
automotive applications.

" Excellent oxidation stability


" Good mechanical stability
" Excellent water resistance and rust inhibiting properties

Typical applications
" Agricultural equipment
" Automotive wheel bearings
" Conveyors
" Small electric motors
" Industrial fans

Available pack sizes


Packsize Designation
35 g tube LGMT 2/0.035
200 g tube LGMT 2/0.2
420 ml cartridge LGMT 2/0.4
1 kg can LGMT 2/1
5 kg can LGMT 2/5
18 kg pail LGMT 2/18
50 kg drum LGMT 2/50
180 kg drum LGMT 2/180
Technical data
Designation LGMT 2/(pack size)
DIN 51825 code K2K-30 Corrosion protection
Emcor:
NLGI consistency class 2
3 standard ISO 11007 030
Thickener Lithium 3 water washout test 030
Colour Red brown Water resistance
Base oil type Mineral DIN 51 807/1,
3 hrs at 90 °C 1 max.
Operating temperature range 330 to +120 °C (–20 to +250 °F)
Oil separation
Dropping point DIN ISO 2176 >180 °C (>355 °F) DIN 51 817,
Base oil viscosity 7 days at 40 °C, static, % 136
40 °C, mm2/s 110 Lubrication ability
100 °C, mm2/s 11 R2F,
Penetration DIN ISO 2137 running test B at 120 °C Pass
60 strokes, 1031 mm 2653295 Copper corrosion
100 000 strokes, 1031 mm +50 max. DIN 51 811 2 max. at 110 °C (230 °F)
Mechanical stability Rolling bearing grease life
Roll stability, R0F test, L50 life at
50 hrs at 80 °C, 1031 mm +50 max. 10 000 r/min., hrs 1 000 min. at 100 °C (212 °F)
V2F test 8M9
Shelf life 5 years

These characteristics represent typical values.

Advanced tool for grease selection and relubrication calculation


LubeSelect for SKF greases
Selecting a suitable grease for a particular bearing is a crucial step if the bearing is to meet
design expectations in its application. SKF knowledge about bearing lubrication has been
encapsulated into a computer program that can be consulted at skf.com/lubeselect

LubeSelect for SKF greases provides you a user friendly tool to select
the right grease and suggest frequency and quantity, while taking into
account the particular conditions of your application. General guidelines
for typical greases for different applications are also available.

Scan or click the QR code, or go to skf.com/lubeselect

skf.com | skf.com/lubrication | skf.com/mapro


® SKF is a registered trademark of the SKF Group.

© SKF Group 2022. All rights reserved. Please note that this publication may not be copied or
distributed, in whole or in part, unless prior written permission is granted.
Every care has been taken to ensure the accuracy of the information contained in this publication, but
no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out
of the use of the information contained herein.
PUB MP/P8 12018/3 EN · November 2022
Certain image(s) used under license from Shutterstock.com.

You might also like