aries, 12:27 Posh eesouRR Fete PATER ESaarien Language switching @ Press and hold the "§£44/M" key to power on, release the key after the screen. is lit, and power off after 10 seconds @ Power on and start again to complete the switch, nitpsilwww-banber.com/banberl6374be922ee0e2000772c166aries, 12:27 Posh eesOMRR Fath BREK Technical parameter g Basic parameters Power supply: DCSV (all secontined) ‘Battros for use: Batteries that mest the stop discharge voltage of 2.5~A.5V and 4.2V charging are suitable Power Supply interface: Dual Type-C System language: Chines, English ‘Test Quanity: way charge and release measurement Intemal esitance measurement support, se DIC two-ne method to test inter resisfance ‘Charging incon: Support, ful of sutomatie ato charging, nt suitable For tia iron phosphate battery charging Discharge function: suppor, stop autom ally when condition is reached Automatic charging: Yes, LitFeste Phosphate batteries are not suitable for charging when the battery is lly charge atthe end a he automatic mode. Loop filling: suppor, -9 eyes adjustable Status Tip: Support Stop discharge voltage: 2.5V,2.6V,2.7V,28V, 299, 30, 3.1V,32¥, 1H adjustable 3.3, 34V,3.5V Discharge current: max. 1A cure, not adjustable, doesnot support selmprovement ‘Cooling mode: Active coaling High temperature protection: suppor ‘Charging Voge: Dedicated atery charging chip contol, max. 1A charging, fall vollage 4.2 over off save save stings parameters oly, donot save measurement dla Product weight 200¢ (net weight) 260 (incluing packaging) Product size: 150 « 103 «36mm Packaging size: 82 « 112 » 50mm hipsulwaew-banber.com/banber/6274be%2ee00200077ec186 zine20/11/23, 12:27 Pai 18650 M/E @ Hardware introduction |. Type-CSV power supply interfe 2, Type-C3V power supply interface 5, Channel 1 18650 battery holder 44, Channel 2 18650 baller bolder Channel 3 18650 battery holder {6Channel 4 18650 baery holder A Chanel 1 Terminale 8.2.Chamel2 Terminals 9,1 Chanel 3 Terminals 102 Channel 4 Terminals 1, Cooling fan 12, Display hipsulwaew-banber.com/banber/6274be%2ee00200077ec186 ate2ai23, 12:28 Feast essoume beth Nem! 13, RRAUM key 14, BREIS key 15, EMBIRIS key 16, BSBICHN key 17. CHNI channel status indicator 18, CHN? channel status indicator 19, CHINS Channel Status Indicator 20, CIINI Channel Status Indicator Q Interface introduction 1, Realtime voltage 2, Real-time curent 3, Cumulative capacity 4, Cumulative energy 5, Batery intemal resistance 6, cumulative runing ime-hhhsmmiss (hours minues seconds) 7, Number of cycles 8, low voltage stop discharge 9, working mode menu 10. Stats nation 11, Channel Indication @ compari The product uses the DC 2-wire method to test the internal resistance of the battery n of internal resistance test accuracy When the battery is fully charged, the numerical accuracy is high. The test results are used for reference and comparison between the batteries tested in the same batch. For those with high internal resistance accuracy requirements, please use a professional internal resistance instrument using the 4-wire AC method to test, Test principle nitpsilwww-banber.com/banberl6374be922ee0e2000772c166 ane2aitti2s, 1228 FEES 0ST EMIS DN ‘The DC impedance is that according to the physical formula R=V/, the test equipment forces the battery to pass a large constant DC current (usually @ large current of 1A-80A is used at present) in a short time (usually 2-3 seconds), measures the voltage at both ends of the battery at this time, and calculates the ‘current intemal resistance of the battery according to the formula, #a (ee RESMED 18 16 a a 38 0 2 v7 68 57 95 80 80 ca 3.69 p ° 4.05 90 104 3.85 96 19 9 Capacity test accuracy reference ‘The test results of five LGABB4 18650 batteries (with a nominal capacity of 2600mAh) in AUTO mode are as follows ane raieeaR wR (AN 1 ot 2650 2 36 2602 3 50 2609 4 8 2616 5 33 2643 g Product show htipsitinww banber.com/banberi6374be9020006200077ect55 siz2ai23, 12:28 Posh eesOMRR Fath RE How to use 1, Measuring intemal resistance ‘The product uss the DC 2-wire method to test the internal resistance ofthe battery, When the batery i filly charged, the numerical accuracy is high. The test results are used for reference and comparison between the batteries tested in the same batch. For those with high intemal resistance accuracy requirements, please ire method totes. ‘use a professional intemal resistance instrument using the 4 hipsulwaew-banber.com/banber/6274be%2ee00200077ec186 ez2ai23, 12:28 Fash essouma zeta Test method iat De Wait a few seconds after installing the battery, read the battery data, and the battery voltage and internal resistance parameters will be displayed. There will be a delay in data loading during battery loading and unloading, and the data will be checked after it is stable. ‘The circuit is disconnected when no battery is installed, and the resistance value is infinite ‘The cireuit is formed after installing the battery, with an internal resistance of 31mOhm Reminder **Hiigh accuracy of internal resistance measurement when the battery is fully charged *When the voltage is insufficient, the internal resistance display may have an excessive value, Please reinstall the battery for measurement after the battery is fully charged. "The internal resistance of single battery is different, and the actual measurement il "There is line resistance when using the extension wire to test the battery, and the results shall error will increase 2. Setup method 2.1, Click the "RRALIM' key to switch menu options 2.2, Mode Menu: Click the“WHRE/S’ nitpsilwww-banber.com/banberl6374be922ee0e2000772c166 me ution to switch Mode2ai23, 12:28 Posh eesOMRR Fath 2.3. Stop discharge voltage: click "J{88/S" to switch the stop discharge voltage, and the adjustment range is 2.5V~3.5V, The stop voltage is invalid for "charging mode", to set the number of eycles. The eyele is only 2.4, Number of eyeles: clic valid in "Auto Mode" Invalid number of cycles in "charge mode" and "discharge mode” 3. RuwStop Click the "f#@5/R/S" button to Run or Stop the program The program is not running "STA:STOP" Run charging procedure "STA:CHG" Run discharge procedure "STA:DSG" End of program operation "STA: END" nitpsilwwwbanber.comfbanberl6374be9222ai23, 12:28 Posh eesOMRR Fath ‘STA:EDN"only means that the program has completed its operation. If the conditions of the current link cannot be met during the program operation, it will skip to the next link until it is completed, and the program will stop running! High temperature protection "STACERR" "STA; ERR" means that the high temperature protection program is triggered and the charging and discharging program stops running. The protection may be triggered due to the abnormal operation of the cooling fan, Itis necessary to check the cooling fan, remove the cooling fault, and then rerun the program. ‘Switch channels: click "J3BE/CHN” to switch channels, view and set channel parameters ging 5.1, Connect DCSV power supply. The charging mode must be connected with two SV power supplies. 5.0) 5.2 Adjustment mode: MODE:CHG filling battery 5.3 Click "°F/R/S" to run the program. The program starts, indicating the ‘STA:CHG". The charging process only records the time, eapavity and energy. STA:END" ler charging, the program stops running, indicating the state nitpsilwww-banber.com/banberl6374be922ee0e2000772c166 eine2ai23, 12:28 Feast essoume beth Nem! Use SV/4A power supply to charge four batteries atthe same time, Refer {o the measured charging time: One way: 2084mAh charging, 3 hhours, 16 minutes, 53 seconds Tl i] nk 6. Battery capacity measurement: the battery capacity can be measured only after the discharge is completed 6.2. Adjustment mode: "MODE: SDG', fill the battery to the battery holder 6.3. Set the required stop discharge voltage, taking 2.7V as an example The battery has power voltage drop under load, and the voltage drop is the actual Voltage that triggers the stop 6.4, Click "FG/R/S" to run the program, The program stars, indicating the state: discharge, Record the time, eapacity and energy during discharge. After charging, the program stops running, indicating the state: STA: END. ‘The battery is measured with a stop voltage of 2.79, and the measured discharge time is as follows: One way: discharge 2231mAh, taking 2 hours, 24 minutes and 25 seconds 7. Battery capacity separation and running cycle: "MODE: AUTO" mode operation procedure 7.1. Connected to 2-circuit DCSV power supply nitpsilwww-banber.com/banberl6374be922ee0e2000772c166 rote2ai23, 12:28 Posh essoume beth nem! 7.2, Adjust the mod Gf Me battery holder 7.3, Set the stop discharge oltage 7A, Set the number of cycles 7.5, Click "F3(8/R/S" to run the program: the program starts, indicating thatthe status "STA:CHG” represents the current running charging program, charging process records time, does not measure capacity and energy; Automatically switch to discharge aftr charging, indicating that the stale "STA:DSG represents the current running discharge program, recording time, capacity and ‘nergy during the discharge process; Switch to charging after discharging, indicating the state: charging, number of cycles = 1, the program ends running after charging, indicates that the state "STA:END" cyele number is greater than 1, enters the discharging mode again after charging, after entering the discharging mode, time accumulation calculation, capacity and energy re- ‘measurement, charging and discharging cycle until the eycle is completed, the program ends, the battery is full, indicating the state: STA:END. "Actual charging time reference: Discharged battery, automatic mode cycle 1 test: test capacity 2608mAh, time consuming: 9 hours, 59 minutes, 26 seconds *When the cycle is greater than 1, capacity metering only records the last discharge capacity, non-average capacity * Capacity, energy, and time data are cleared automatically when shutting down or switching modes nitpsilwww-banber.com/banberl6374be922ee0e2000772c166 ne2a123, 12:29 nitpsslwww-banber.comfbanberl6374be922ee0e2000772c166