0% found this document useful (0 votes)
53 views25T & 32T Loading
Uploaded by
designbridgeeng geo groupCopyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
0% found this document useful (0 votes)
53 views25T & 32T Loading
Uploaded by
designbridgeeng geo groupCopyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
/ 14
‘APPENDIX-XXiIIE
“25t Loading-2008"
BROAD GAUGE-1676 mn
Equivalent Uniformly Distributed Loads (EUDL) in kilo Newtons (tonnes) on each
‘ack, and Coetfcient of Dynamic Augment (CDA).
For Bending Moment, Lis equal to the effective span in metres. For Shear
Force, Lis the loaded length in metres to give the maximum Shear Fores inthe membor
Under consideration.
“The Equivalent Uniformly Distributed Load (EUDL) for Bending Moment (Bt), for
spans upto 10m, is that unilormly dstibuted load which produces the BM atthe centre
Of the span equal to the absolute maximum BM developed under the standard loads,
For spans above 10m, the EUDL for BM is that uniformly cstbuted load which
produces the EM at one-sixth of the span equal to the BM developed at that section
Under the standard loads.
EUDL for Shear Force (SF) is that uniformly distributed load which produces SF
atthe ond ofthe span equal to the maximum SF developed under the standard loads at
that section
NoTe:
(1) Cross girders ~ The we foad on across gier wil be equal to half the total load
for bending in a length L, equal to twice the distance over centres of cross
dieders.
@) Lor Coetcient of Dynamic Augment (CDA) shall be as laié down in clause
244.
8) When loaded length lies botwoon the values given inthe table, the EUDL for
Bonding Moment and Shear Force can be interpolated.
‘Total load for Bending | Total load 'or Shear Force | impact Factor
Lom Moment | ‘cOA=
mw at t 0.15+8/6+L)
T 2 4 3 6
16 790.50 Bow Bo. 7000.
15, 49050 | 4005 ‘50.00 1.000.
20 490.50 52728 5375 1.000.
25 490.50 810.08 83.00 1.000
30. 490.50 o7res8 | 60.7 1.000
38 31.02 Tair 7387 (3.982
40, 595.96. 720.8 ‘0 (0.950
45, 676.00 esse | 80 O12
50 745.56 927.05 94:50 ‘err
55 811.56 768 90.55 ‘ose
80 6652 301779 | 10878 ‘oatr
85 a1at1 sos2a1 | 10732 (0.760
70 952.94 97.14 | 1096.75 | 11078 ‘785 “Total Toad for Bending | Total load for Shear Force | Impact Factor
Lom Moment | _ ‘COA
iw t iw 1 | oassenes)
75. 967.57 iar | Hieae | tat O73
80. 301778 | 10375 | 1168.87 [11910 0721
85. outer | 10847 | 121467 | rza82 ‘0702
90. 1106621 | 10880 | 1285.49 | 12000 ‘0.683
95 | 109940 | 111.05 | 1318.08 | toaos: ‘0.685
00. 100.20 1200 | 1077.08 | 14040 ‘850
10. 25266 | 190.75 | vaso | 18218 ‘621
20_|—tor7sa| oao | 158022 | 16000 ‘0585
730. va75a3_| 18037 ter0.7e | 17031 Oar
40. is5091_ | ts801 [174080 _[ 17748 0.550
150 “631.60” | 16832 | 1813.48 | tease. 0591
“160 7osat | 1741s | 1005.40 | 19425 514
170 91058 | 16546 | 1907.12 | 2058 0.406
180. wae | 2088.04 | a1206 0483
190 zoiss | 218068 | 22220 0470
200 zioss | 2272.4a 58
210 ess | 296421 ‘O46
220 22802 | 2455.84 ‘0.486
230 29665 | 2567.46 0.496
240 245.16 | 2690.18 a7
250 ‘55.66 | 2750.81 ‘0.408
260 ‘ea06 | 2ao0 46 0.400.
270 27046 | 201406 0.92
280 27880 | s005.69 0.85
230. 25709 | s0873t 0379
209. 29535 | st88 06 0372
220. 31179 | 3872.10 0.361
L340. 32812 | 3585.34 (0.360
360 34436 | 5738.59 [0340
38.0 96055 | 3821.74 |
400 376653 | «104.90 8
420 ‘39260 | 4288.05. ‘0317
440 1052 | 4471.20, ‘010 |
460 20.8 | 4654.08 ‘0.208
480. asa | A571 0286
500) 465.50 | 5020.56 0208
550. 513.15__| 5478.0 02st
350 60845 | 6809.77 0263
709 53,10 | 6851.50, 0.265
750 2075 | 7300.23 on
300 Tago |_7768.97 243
25.0 795.05 | —a224.6t ‘0208
900, ‘399,70 | 2682.36 ‘0208
250. ‘95635 | 6139.96 0200 ‘Total load Yor Bonding — | Total load Yor Shear Force
Lom Mor
i T iN 7
000 | 918273 | sao | ~oso7.61_ | ~ o7e6
1050 | 961037 | eves | 1005535 | 102501
[110.0| 10018 00 | 1028.30 | 1051298 | 1971.66
1150 | 1052564 | 107205 | 007062 | 111831
1096328 | 1110.60 11429.96 | 1168.97
t1eaos| 1166.25 | 1108500 | 1211.62
90. “1998.55 | 121290 | szoae3 | 1250.27
EUDL for BM and Shear Force aiven inthis Aopendix are not applicable for ballasted
{eck for spans upto and including 8.0m for which Append Xxll(a Is to be refered APPENDIX XXill (a)
“28t LOADING-2008"
BROAD GAUGE 1676mm
Equivalent Uniformly Distributed Load (EUDL) for Bending Moment
{in Kilo-Newton (tonnes) for cushions of various depths and spans
upto and including 8m,
Fr Bending Moment Lis equal to the efectve span in metres.
NOTE:
(1) For intermediate vaues of Land cushions, the EUDL shall be arvod at
by linear interpolation.
(2) __ The figures given below donot include dynamic effects.
EUDL for Bending Moment
‘Cushion (mm)
L 200 200, 400) 600.
Metres| KN | t | KN | ¢
os | aes | ars | zis | 226
10 | sves | sa7 | asas | 62
1s | aise | «4 | aos | so
20 | aoa | aaa | aot | aan
as | ass | ass | 457 | as
ao | 420 | 42 | sue | ass
we2 | was | 145
a7 | eas | 207
201 | oss | ase
418 | 9054 [39
495 | a5 | 415
446 | «202 | 429
as | sse6 | soo | aor7 | so2
40 | sms | 502 | soe | s76 sr1_| sto | seo
45 | sso | 07 | e401 | 052 o57_| oe | 047
s0_| 726 | rar | rz | 732 | 78 | rer | ros0 | riz
55 | ros | oor | ve: | 002 | 78 | roe | 7727 | 709
60 | 71 | asa | exo | 050 | os00 | o56 | esos | o18
zo | 61 | 05s | sse7 | 052 | sas | ote | e221 | ont
20 | vows | 023 | eoo7 | 1020 | sone | 1017 | eos | 1018
aos | aris | «as APPENDIX Xxill (a) ( Contd.
2, Equivalent Uniformly Distributed Load (EUDL) for Shear Force in
Kilo-Newton (tones) for cushions of various depths and spane upto
‘and including 8m.
For Shear Force, Lis the loaded length in metres to give the maximum Shear
Foroe in the member.
NOTE:
(1) For intermediate values of Land cushions, te EUDL shall be arived at
by linear interpolation,
(@) The figures given below do not include dynaic effects.
EUDL for Shear Force
i ‘Cushion (mm)
200 300 00, 00
Wetres| KN [t | KN] t | Nt | EN] Tt
05 | 271 | 278 | mis | me | we7s | wor | 1ase [ae
T_[-ses_[ sar _| seas | sez | sao | sar] mat | 287
7s_| aes_[-aaa[ aoa | aos | ese | a0 | se09 | ase
2 | was [aas_| eae | aat_| aoa ata | 057 | ao
25_| sao | s30_| soa | sig | aor | aoa | asa | aaa
3 | es | ete | seo | saa | aris | sea | woo | oe
3s [ear eri | emi | a7 | exon | az | ere | ora
a [ras [72a | ener | ria | eons | a8 | oss | a8
as_[ 723 [soa | 7780 | ves] wear | 7a] vara | tan
S| esoz | er? | ess | ose | ere | ear | aia | ot7
3s_| ees [esa | oma | azo | ea | sos | eas | aro
6 | 0622 | 081 | ows | 068 | core | e506 | o129 | oat
7 | Teste | F055 | Taena | Toad | TOSS | Woaa | waza | TOTZ
3 [oes [HTT] TOS | TOT] TOT | TORE | TORE | TOTS APPENDIX-XXIV
“25t Loading-2008"
BROAD GAUGE-1676 mm
Longitudinal Loads (Without Deduction for Dispersion)
NOTE: where loaded length ies between the values given In the Table, the tractive
‘tortor braking force can, with safety, be assumed as tat forthe longer loaded
length.
1 (Loaded | Tractve effort ‘Maximum UF
Tength in | KN t i t
metres)
1 3 a 5 7
40 jaso_| 61.80 | 630 050
15 1050 | 61.80 | 60 3050.
20 2100 | 42263 | 1250, 21.00
25 ‘2100 | 12263 | 1250. 21.0
30 2100 | 12263 | 1250, 21.00
35 2500_| 165.79 | 16.90 25.00
40. 315016443 | 18.00 31.50
[as 3150 | 1644s | 1880 31.50
50. 3150__| 16443 | 1880 3180.
35. 3150 | 16449 | 18.00 31.50
80 ‘3150 | 18843 | 18.00 ‘3150
(ss 3ag2_ | 22073 | 2260 3882
70 3392 | 22073 | 2260. 32
78 3392 | 22073_| 2250. 3332
80 ‘4165 | 27565 | 28:10 465
35 “4165 | 27565 | 28:10, a5 |
90) 1527566 | 28:10 41.5
as 2200_| 27566 | 2810 42.00
100 a996| 5158 | 3900 49.98
110 4996 | 931.58 | —s300 49.98
20 5250 | s31s8 | 3300 2.50
130 63.00 |ost.s8 | 33.00 163.00
140 163.00 | 96788 | 37.50 ‘68.00
10 63.00_| 96788 | 37.50 6.00
160 163.00 | 96653, 68.00
70 ‘ea00 | A884 ‘6,00
180 6.64 | aai.05 65.54
190 e564 | adtas est
200) 7457 | 49630 7437
210) Tas7 | 496333 7497
220. vas7—|s11.10_| 32.10 vast
230. vas7—| maa | 5338 747
240 vas7—|~s5i32 | 55.20 74s7
250 ‘e400 ssi-aa | 55.20 | st00:
(260 940 | 560.15 | 87:10 340 U(Loaded | Tractive effort | Braking torea: ‘Maximum LE
fength in| KN t iN t in t
metres)
270 | oar05|oaso | 67290 32705 | — 9450
‘280 | 92705 | 94s0 | 60705 927.05 | — 9480
00 | 0a0si | 09.96 | 682.16 “e001 | 90.96
'30.0_| 96061 | 09.96 | 662 16 ‘90.61 | 00.08
‘320 | 98081 | e9.96 | —ea058t ‘900.61 | 9006
‘340 | 98081 | 99.96 | 73575 ‘0.1 | 00.06
980 | 108005 | 105.00 | 79575 1030.05 | 105.00
380 | 18808 | 115.50 | 76026 119306 | 1150
400 | 129606 | 12600 | 788.00 1296.08 | 128.00
| 420 [4956.08 | 128.00 | soe 33 128.00
‘440 | 125608 | 128.00 | e935 ia [= 128.00,
48.0 | 125608 | 126.00 | 950.38 1236.08 | 126.00
46.0 | 125608 | 126.00 | 892.00 1236.05 | 126.00
50.0 |123608 | 128.00 | 99749 1296.05 | 126.0
550 | 123608 | 126.00 | 96825 296.08 | 126.00
60.0 | 125608 | 126.00 | 1080.05 "1236.06. | 126.00,
1650 | 129608 | 125.00 | 1000.87 1236.06 | 126.00
700 | 129608 | 126.00 | 115268 | 117.50 | 1296.08 | 126.00
750 | 123608 | 12800 | 121580 | 12370 | 120606 | 126.00
‘90.0 | 199606 | 126.00 | 1275.30 | 190.00 1278.30 | 190.00
‘850 | 123608 | 128.00 | 1996.12 | 196.20 | 1596.12 | 19620
‘900 | 123508 | 12800 | 1907.03 | 142.50 | 139783 | 142.50
[126.06 —| 126.00 | “1820.55 | 185.00 | 1200.55 | 155.00
1296.06 | Ya8.00_| 1561.37 | 161.20 | 1681.37 | 161.20
129606 | 126.00 | 1649.18 | 167.50 | 1643.19 _| 167550.
129606 | 128.00 | "1708.00 | 17370 | —170800 | —173:70
1236.06 | 18.00_|-1765.80 | 180.00 | 1765.80 | 180.00
1236.06 | 126.00 | 1a26.62 | 18.20 | —ie26.62 | 108.20
130.0 | 1236.06 | 128.00 | ~tass.«3 | 19280 | 1666.25. | 102.50
%0 APPENDDCXXVIE
“DEC loading (325t axe load)”
BROAD GAUGE-1676 mm
Equivalent Uniformly Distributed Loads (EUDL) in kilo Newtons (tonnes) on each
‘tack, and Coefficient of Dynamic Augment (CDA).
For Bending Moment, is equal tothe effective span inmetres, For Shear
Force, Lis the loaded length n metres 1 glve the maximum Shear Free in the member
Under consideration.
‘The Equivalent Uniformly Distbuted Load (EUDL) for Bending Moment (BM), for
‘pans upto 10m, s that uniformly distributed load which produces the BM atthe centre
‘ofthe span equal to the absolute maximum BM developed under the standard loads.
For spans above 10m, the EUDL for BM is that uniformiy distributed oad which
produces the BM at one-sixth of the span equal fo the GM developed at that section
Under the standard loads
EUDL for Shear Force (SF) is that uniformly dstrbutec load which produces SF
atthe end of the span equal tothe maximum SF developed urder the standard loads at
that section
Nore:
(8) Gross girders ~ The ive load on a cross girder wil be equal to hat the total load
for bending in a length L, equal to twice the distance over contres of cross
‘irs,
(8) for Coetcient of Dynamic Augment (CDA) shall be as lid down in clause
24.1
(8) Wen foaded length lies Between the values given inthe table, the EUDL for
Bending Moment and Shear Force oan be interpolated.
‘Total oad for Bending | Total load for Shear Force | _CDAz
Lom ‘Moment 0.1548/6sL)
ro t ca t
i 2 3 4 5 é
1 33700 5.00 57.00 5.00, 7.000.
15 637.00 15.00 7.00” | 65.00 1.000,
20 697.00 5.00 637.00 65.00 zi)
25 153700 | 65.00 764.40 78.00
30 3700 | 65.00 ‘o7 35.87
35 652.97 65.55 ‘910.08 82.86
40) T1687 7313 955.50 97.50
45. Tos? 7364 | 103408 | 105,60
50 249.98 Be12 112249 | 11456 q]
55 940.90 96.01 119423 | 121-86
85 1090.15 | —ivi24 | —aat96 | 136.20 >
70 1148.76 | 11722 | was | 14808 ‘Total load for Bending
Total load for Shear Force
Lom ‘Moment
ia i ia r
78 fiegsa|vaeao| 1406.66 | sere
“a0 126146_| 12872 | 56241 | 15048
35 xa0456_| 196.18 | 1620.43 | 168.35
90 199973 | 14285167188 [170.60
28. vases —v4sst | a71804 | 17531
100 351116 | 15420 |1759.49” | 17058
110 68785 | 172253 | 1847.70 | 108.55
120 175949 | 17as | 105022 | 199.92
130 egr2 | 186.45 | 206760 | 21098
40 192425 | 196.35 | avoz0s | 2877
150 200831 | 24s | za0s.e5 | 235.27
160. 21200 | 217.56 249.01
110 ‘226590 | 251.53 | 261.50
180 aoe | 24a? [275.8
190 25x69 | 2587 36 [—2aa74
200 2ecie1 | 271s | —2aaa65 | s00.27
210. ‘ve0es | 26874 | ~soasas | _s10.74
220 2885.90 | 29440 | 3155.11 |" 2.96
230. 2oe208 [90429 | 9267.12 | ~ ssa
240. 316.4 | 3386.12 | sisae
250) ‘2593 |_ss0eae | 367.60
250 0662 | seza.ia | se0.5
210 540.25 | —s7aa.a8 | 382.60
20 ‘35900 | —ssrass | 305.36
230 ‘7os2 | —
