Scribd
Upload
275 views

Senna Helmet - A4

This document provides instructions for making a papercraft Senna helmet template in 3 steps or less: 1) Gather materials including paper, printer, cutting tools, scoring tool, ruler, and glue. Print the 7 template parts on A4 paper at a 1:4 scale. 2) Score all dotted lines and cut out solid lines. Fold along scored lines with printed numbers inside. 3) Glue flaps one part at a time to assemble the helmet, using a toothpick to apply glue and clothespins to hold flaps. Be precise and patient.

Uploaded by

kraftsmanninternational
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
275 views

Senna Helmet - A4

This document provides instructions for making a papercraft Senna helmet template in 3 steps or less: 1) Gather materials including paper, printer, cutting tools, scoring tool, ruler, and glue. Print the 7 template parts on A4 paper at a 1:4 scale. 2) Score all dotted lines and cut out solid lines. Fold along scored lines with printed numbers inside. 3) Glue flaps one part at a time to assemble the helmet, using a toothpick to apply glue and clothespins to hold flaps. Be precise and patient.

Uploaded by

kraftsmanninternational
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Senna Helmet - DIY Template

1 x A4 Page - 7 Parts
English Guide EN
Needed material
First you will need a few tools and supplies in order to get your papercraft done:

Paper Printer Cutting tools Scoring Ruler Glue


We recommend at Check the Scissors, cutter or Choose thin metal preferably a flat Most of papers
least 120gsm maximum thickness cutting knife such tool with a round metal ruler about stick with regular
paper or more your printer can as scalpel. end, for example : 20-30cm long glues. Use white
Glossy Papper will print or go to your Always use a Empty pen or nail PVA glue or wood
work well. local printer with cutting mat. art tools glue.
The helmet will be your papers and
1:4 scale if printed get the files printed
on A4 Paper. there.

4 easy steps to assemble your papercraft sculpture


Once all the sheets are printed !

Step 1 - Scoring
Grab your designated scoring tool and a ruler to
mark all the dotted lines. Do this on a cutting mat.
Scores must be deep enough to fold the paper
easily. If needed try first on a corner of your sheet.

Step 2 - Cutting
Using some cutting tool, cut outlines. Be careful to
stay on the line ! Cut all fully stroked lines.
If you are using a cutting knife or cutter you must
put a cutting mat underneath.

Step 3 - Fold 3
Fold lines according to the following
instructions :
Lines with a
Printed Numbers goes on the inside. Stroke - Dot - Stroke Dot Dotted Lines with Just for aligning, dont cut
Fold away from your self fold towards yourself

Follow the order of Small numbers!


Step 4 - Glue & Assemble 6
4

Start the assemble by glueing a little bit of glue on


a flap on the outside part.
2

Glue all flaps of a number at the same time by matching


3

1
similar numbers on the inside part.
Remember, the flaps are non visible once the
sculpture is done.

Tips !
- Avoid over folding. - Align corners first when glueing, it will reduces shifting.
- Use a toothpick stick or precision tool to apply glue. - Once the sculpture is done use a thumbtack to hold it against the wall.
- Use clothespins to hold flaps and move on faster - Be precisse and take your time. Patience is the key.
5

5
4
5
1

3
5

6.
8

7
15
12

15

11
14

13

9.

12
10
9.

10
14
13

12
7

8
4

2
3
Senna Helmet
6.

Scale 1 : 4

You might also like